Τυποποίησης (CYS), τηλ: Αναπλ. Διευθυντής Τμήματος ... ·...

Λευκωσία, 12 Ιουλίου 2016

ΠΡΟΣ: Όλα τα Μέλη ΘΕΜΑ: June 2016 Notification Procedure 1025/2012

Κυρία/Κύριε,

Σας επισυνάπτουμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, με-λών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνι-κών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικο-νομία.

Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δεν υπάρξει οποιαδήποτε ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: [email protected] Με εκτίμηση, Ανδρέας Ανδρέου, Αναπλ. Διευθυντής Τμήματος Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ.

Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066 , Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail: [email protected], Ιστοσελίδα:www.ccci.org.cy

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2016-06-01 to 2016-06-30

Register issued on : 2016-07-01

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A99: UNDETERMINED

Subsector : A99 (Secondary Subsector)

Registration Date : 2016-06-27

Organization : MCCAACountry : Malta

Project ID : 00006200/0001 Project Established

ICS : 03.080.20, 91.060.20National Ref : SM 6200Title : Minors in marketing communicationScope : The scope of this Maltese Standard is to define the participation of minors in marketing

communication

Relatedness :National : New :

** End of Subsector **

** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2016-06-14Organization : EVSCountry : Estonia


ICS : 13.220.20, 91.060.50National Ref : prEVS 871Title : Fire safety and emergency exit doors and door hardware - UseScope : This standard specifies requirements for use of fire safety doors and emergency exit doors

and there hardware in buildings. Requirements for emergency exit doors in this standard are implemented for doors on escape routes; these doors may have a function of fire safety or not. The particular need to meet the fire safety or emergency exit requirements depends on particular location of the door in the building. This standard does not include special requirements for keeping people in locked rooms. The solutions for this kind of rooms should be worked out separately for each room. This standard does not describe methods for testing of fire safety doors and emergency exit doors; these methods are described in separate standards. The use of this standard may be affected by development of European product standards for doors and windows.


Subsector : B01 Registration Date : 2016-06-22Organization : NBNCountry : Belgium

Project ID : BE664015/0001 Draft for public enquiry

ICS : 13.220.20National Ref : prNBN S 21-208-3Title : Fire safety in buildings - Ventilation openings in indoor staircases


Subsector : B01 Registration Date : 2016-06-22Organization : NBNCountry : Belgium


ICS : 13.220.20National Ref : prNBN S 21-111-1Title : Fire detection and fire alarm systems - Voice Alarm Systems - Part 1: Selection criteria

for Voice Alarm Systems



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2016-06-22

Organization : ASICountry : Austria


ICS : 91.010.30, 91.080.40National Ref : ÖNORM B 1992-1-1/ATitle : Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for

buildings - National specifications concerning ÖNORM EN 1992-1-1, national commnts and national supplements

Scope : This Austrian Standard specifies national parameters to ÖNORM EN 1992-1-1 and shall be applied jointly with ÖNORM EN 1992-1-1 in Austria. This standard applies to the design of buildings and civil engineering works in plain, reinforced and prestressed concrete. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990: Basis of structural design.


Subsector : B02 Registration Date : 2016-06-22Organization : ASICountry : Austria


ICS : 93.020National Ref : ÖNORM B 1997-2Title : Eurocode 7: Geotechnical design - Part 2: Ground investigation and testing - National

specifications in connection with ÖNORM EN 1997-2 and national supplementsScope : This ÖNORM defines requirements for geotechnical investigations and supports the

implementation of ÖNORM EN 1997-2. These standards shall be applied jointly. This ÖNORM applies to geotechnical investigations of soil and rock as subsoil and construction material for all types of construction works, including underground constructions, construction of landfills and remediation of contaminated soils. For cavernous underground constructions deviations from the present ÖNORM are permissible, if sufficiently justified. This ÖNORM doesn¿t apply to mining, testing of rock as a construction product and the exploration of raw material deposits. This ÖNORM contains requirements concerning design, execution and evaluation of geotechnical investigations and should ensure that soil or rock properties of the subsoil are known when designing the geotechnical structure.


Subsector : B02 Registration Date : 2016-06-02Organization : BAS Draft Issue Date : 2016-05-27Country : Bosnia and Herzegovina Latest Date for Comments : 2016-07-27

Project ID : 00076427/0001 Draft for public enquiry

ICS : 91.010.30National Ref : nsBAS EN 1991-1-5/NA:2016Title : Eurocode 1 - Actions on structures - Part 1-5: General actions - Thermal actions -

National annexScope : This document constitutes the National Annex to BAS EN 1991-1-5:2016, Eurocode 1 -

Actions on structures - Part 1-5: General actions - Thermal actions. The European Standard EN 1991-1-5 allows national safety parameters to be specified for a number of clauses. These

national determined parameters (NDP) cover alternative procedures, the provision of individual values, and the selection of classes from designated classification systems. The relevant parts of the text are identified in the European Standard by references to the possibility of national choice. This National Annex contains national provisions for the determination of thermal actions on buildings, bridges and other civil engineering works.


Subsector : B02 Registration Date : 2016-06-20Organization : DINCountry : Germany


ICS :National Ref : 00517581Title : House service connections facilities - Pinciples for planning


Subsector : B02 Registration Date : 2016-06-02Organization : UNMZ Draft Issue Date : 2015-06-10Country : Czech Republic Latest Date for Comments : 2015-06-30


ICS :National Ref :Title : Bitumen and bituminous binders – Bitumens for pavingScope : This standard specifies requirements for Czech Republic unmodified bitumens for paving,

defined by European standards EN 12591, EN 13924-1, EN 13924-2. It made species selection and choice of optional characteristics that were part of the national annexes to European standards.

Relatedness :National : REV/AMD ČSN 65 7204 (2016) :


Subsector B04: CEMENT

Subsector : B04 Registration Date : 2016-06-27Organization : BDSCountry : Bulgaria

Project ID : BG004004/0001 Project Established

ICS : 91.100.10National Ref : prBDS 12926Title : Cement. Determination of mineral composition of the clinker in the cementScope : The standard refers to the method of chemical analysis of Portland cement, sulfate resisting

Portland cement, pozzolanic cement, sulfate resisting pozzolanic cement and cement with moderate heat release, which contain trass and sand, and gypsum additives to calculate clinker mineral composition. The standard does not apply to cement, containing additives, slag and limestone.

Relatedness :National : REV/AMD BDS 12926:1975 :



ICS : 91.100.10National Ref : prBDS 9192Title : Cement. Determination of the tricalcium aluminate contentScope : The standard refers to the method for determining tricalcium aluminate content of clinker in

sulfate resisting Portland cement, low heat cement, low heat ternary cement and tampon cement, which contain trass, sand, trass and sand, and limestone and gypsum additives, and of Portland cement clinker.



Subsector B05: FIRE TESTS



ICS : 91.060.50National Ref : DIN 18093Title : Fire and smoke control door and shutter assemblies in accordance with DIN EN 16034 -

Installation and maintenance



Subsector B12: MASONRY



ICS :National Ref : 00517734Title : Application of building products in structures - Part 402: Rules for the application of

calcium silicate masonry units according to DIN EN 771-2:2015-11


Subsector : B12 Registration Date : 2016-06-20

Organization : DINCountry : Germany


ICS :National Ref : 00517735Title : Application of building products in structures - Part 404: Rules for the application of

autoclaved aerated concrete masonry units according to DIN EN 771-4:2015-11




ICS :National Ref : 00517736Title : Application of building products in structures - Part 401: Rules for the application of clay

masonry units according to DIN EN 771-1:2015-11



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2016-06-09Organization : NENCountry : Netherlands


ICS : 91.140.40National Ref : NPR 3378-13:2016 Concept nlTitle : Guidelines for gas installations - Section gas pipe work - Part 13: Commissioning,

operation and maintenance of gas pipe work with a maximum operating pressure ≤ 500 mbar

Scope : NPR 3378-13 applies to the commissioning, operation and maintenance gas installation pipe work with a aximum operating pressure ≤ 500 mbar.




ICS : 91.140.40National Ref : NPR 3378-47:2016 Concept nlTitle : Guidelines for gas installations - Section flue system - Part 47: Single flues for type B gas

appliances - Choice of constructions and materials and dimensioning with the help of tables - Guidance to NEN 2757-1

Scope : Single flues for type B gas appliances - Choice of constructions and materials and dimensioning with the help of tables. Guidance to NEN 2757-1




ICS : 91.140.40National Ref : NPR 3378-7:2016 Concept nlTitle : Guidelines for gas installations - Section gas pipe work - Part 7: Gas underground pipe

work - Guidelines for NEN 1078 and NEN 8078Scope : NPR 3378-7 applies to NEN 1078 and NEN 8078. According to the procedures of this part of

the NPR the position, fastening and support, marks and corrosion.




ICS : 91.140.40National Ref : NPR 3378-8:2016 Concept nlTitle : Code of practice gas installations - Section gas pipe work - Part 8: Feeding of gas pipe

work through walls and floors - Guidelines for NEN 1078 a nd NEN 8078 Scope : This part applies to section 5 of NEN 1078:2004 and NEN 8078:2004. According to

procedures in this part bushing in general, thruogh walls, floors and facades are subject.


Subsector : B25 (Secondary Subsector)


Organization : MSZT Draft Issue Date : 2016-07-16Country : Hungary Latest Date for Comments : 2016-08-16

Project ID : 70701606/0001 Published Standard

ICS : 75.060, 75.080National Ref : MSZ 1648Title : Natural gas for public utility services



Subsector B26: ROAD BUILDING AND MAINTENANCE



ICS : 93.080.20National Ref : ÖNORM B 3593-1Title : Bituminous mixtures - Guidline for the preparation of declarations of performance - Part

1: Empirical approachScope : This ÖNORM specifies the methods used in Austria for initial type testing and the framework

for the preparation of declarations of performance of bituminous mixtures, produced following the empirical approach.




ICS : 93.080.20National Ref : ÖNORM B 3593-2Title : Bituminous mixtures - Guidline for the preparation of declarations of performance - Part

2: Performance based approachScope : This ÖNORM specifies the methods used in Austria for initial type testing and the framework

for the preparation of declarations of performance of bituminous mixtures, produced following the performance based approach.




ICS : 93.080.20National Ref : ÖNORM B 3588Title : Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL)

- Rules for the implementation of ÖNORM EN 13108-7Scope : This ÖNORM specifies requirements of Asphalt for Ultra Thin Layers (AUTL) for use on roads,

airfields and other trafficked areas considering the specific geographic, topographic and climatic conditions in Austria. It is designed to be applied in conjunction with ÖNORM EN 13108-20 and ÖNORM EN 13108-21.


Subsector : B26 Registration Date : 2016-06-03Organization : LSTCountry : LithuaniaProject ID : 10002295/0001 Project

EstablishedICS : 91.100.30, 93.080.20National Ref :Title : Bituminous mixtures for motor road. Requirements for activated mineral fillerScope : This standart is applicable to activated mineral filler used to manufacture bituminous

mixtures.


Subsector : B26 Registration Date : 2016-06-03Organization : LSTCountry : Lithuania


ICS : 91.100.30, 93.080.20National Ref :Title : Bituminous mixtures for motor road. Testing methods for activated mineral fillerScope : This standart specifies testing methods for activated mineral filler used to manufacture

bituminous mixtures.



Subsector B29: AGGREGATES



ICS : 91.100.15, 91.100.30National Ref : prBDS 10038Title : Crushed natural additive materials for fire-resistant concrete and mortarsScope : The standard refers to crushed aggregates derived by crushing strong rocks not containing

quartz, calcite, zeolites and amorphous silica, intended for the production of refractory concrete with a binder Portland cement, used in non-aggressive environment at an operating temperature to 650° C.



Subsector B30: FLOOR AND SURFACING



ICS : 97.220.10National Ref : ÖNORM B 2606-3

Title : Florrings for sports grounds - Part 3: Synthetic and bituminous bound surfacesScope : This ÖNORM describes synthetic surfaces and bituminous bound, which are used for sports

facilities. It also includes requirements and tests procedures for the different layers and certification criterias. This ÖNORM also applies for the subbase and base layers of synthetic turf surfaces .



Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2016-06-15Organization : SNCountry : Norway

Project ID : NOT16006/0001 Draft for public enquiry

ICS :National Ref : prNS 3420-BMTitle : Specification texts for building, construction and installations – Part BM: Ventilation and

air conditioning integrated systemsScope : This standard defines templates for spefication of functional to requirements for ventilation

systems



Subsector B32: PRECAST CONCRETE PRODUCTS

Subsector : B32 Registration Date : 2016-06-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8297Title : Design, Manufacture and installation of architectural precast concrete cladding.

Code of practice



Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS

Subsector : B34 Registration Date : 2016-06-27Organization : MCCAACountry : Malta


ICS : 91.060.20, 91.060.20National Ref : SM 3700

Title : Construction of Green RoofsScope : The scope of this Maltese Standard is to facilitate the design, adaptation and construction of

Green Roofs in Malta


Subsector : B34 (Secondary Subsector)


Organization : MCCAACountry : Malta


ICS : 91.060.20, 91.060.20National Ref : SM 3700Title : Construction of Green RoofsScope : The scope of this Maltese Standard is to facilitate the design, adaptation and construction of

Green Roofs in Malta


Subsector : B34 Registration Date : 2016-06-27Organization : MCCAACountry : Malta


ICS : 03.080.20, 91.060.20National Ref : SM 6200Title : Minors in marketing communicationScope : The scope of this Maltese Standard is to define the participation of minors in marketing

communication



Subsector B99: UNDETERMINED



ICS :National Ref : 00517664Title : Soil, investigation and testing - Determination of density of solid particles - Wide mouth

pycnometer



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2016-06-09Organization : NENCountry : Netherlands


ICS : 67.100.01National Ref : NEN 6817:2016 Concept nlTitle : Milk and milk products - Enumeration of faecal enterococciScope : This standard describes a determination method of the number of D-streptococci in milk

and milk products.


Subsector : C01 Registration Date : 2016-06-09Organization : NENCountry : Netherlands


ICS : 67.100.01National Ref : NEN 6820:2016 Concept nlTitle : Milk and milk products - Detection of unwanted contamination of long shelf life liquid milk

productsScope : This standard describes a method for the testing of unwanted contamination of long shelflife

liquid milk products. The method can be used to determine if bacteria are present in the product.


Subsector : C01 Registration Date : 2016-06-28Organization : TSECountry : Turkey

Project ID : t1000893/0002 Project Established

ICS : 67.200.10National Ref :Title : Edible oils of vegetable origin (not subject of a specific standard)Scope : This standard specifies the vegetable oils not subject of a specific standard. Oils, having

specific standard, are not specified.




ICS : 67.060National Ref :

Title : Macaroni Scope : This standard covers macaroni.




ICS : 67.080.20National Ref :Title : Pepper PickleScope : This standard applies to pepper pickle.




ICS : 67.060National Ref :Title : Animal and Vegetable Fats and Oils-Determination and Detection of Mineral Oil Scope : This standard covers the method of determination and detection of mineral oil in animal and

vegetable fats and oils.




ICS : 67.080.10National Ref :Title : Traditional sour pomegranate concentrateScope : This standard specifies to traditional pomegranate concentrate.




ICS : 67.100.99

National Ref :Title : AyranScope : This standard specifies ayran.




ICS : 67.220.10National Ref :Title : MayonnaiseScope : This standard covers mayonnaise. It does not cover the salad sauces and salads which is

prepared with mayonnaise.




ICS : 67.060National Ref :Title : LavashScope : This standart contains lavash. It doesn't contains lavash that is selled non-packaged at

produced place.



Project ID : tst02383/0001 Project Established

ICS : 67.060National Ref :Title : BiscuitsScope : This standard applies to biscuits. This standard does not apply to enriched biscuits.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2016-06-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 7996Title : Torque measuring devices. Calibration and classification usingcontinual torque

application. Method


Subsector : F05 Registration Date : 2016-06-20Organization : DINCountry : Germany


ICS : 17.040.30National Ref : DIN 863-1Title : Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for

external measurements; maximum permissible errors




ICS : 17.040.30National Ref : DIN 2270Title : Geometrical Product Specifications (GPS) - Dial test indicators (lever type) - Maximum

permissible errors



Subsector F06: TERMINOLOGY PRINCIPLES



ICS : 03.080.20National Ref : DIN 2347Title : Translation and interpreting services - Interpreting services - Interpreting at conferences

Relatedness :

National : New :


Subsector F07: DOCUMENTATION AND INFORMATION



ICS :National Ref : BS 4971Title : Conservation and care of archive and library collections



Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES

Subsector : F14 Registration Date : 2016-06-28Organization : UNICountry : Italy


ICS : 37.100.10, 87.080National Ref : UNI1601914Title : Method for the determination of non-original toner cartridge print quality for

monochromatic electrophotographic printer - Method of comparison: non-original toner cartridge vs original toner cartridge

Scope : The standard specifies the requirements for non-original monochrome toner cartridges. The comparison method is applicable to any non-original monochrome toner cartridge.



Subsector F15: MATERIAL TESTING IN GENERAL



ICS :National Ref : 06234894Title : Thermal analysis; differential thermal analysis; principles



Subsector F19: OPTICS



ICS : 37.020National Ref : DIN 58744-2Title : Production in optical engineering - Diamond core drills - Part 2: With fitting cylinder




ICS : 37.020National Ref : DIN 58744-1Title : Production in optical engineering - Diamond core drills - Part 1: With fitting thread




ICS : 37.020National Ref : DIN 58744-3Title : Production in optical engineering - Diamond core drills - Part 3: With external fitting

thread



Subsector F99: UNDETERMINED



ICS :National Ref : BS 0Title : A standard for standards. Principles of standardization



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2016-06-20Organization : DINCountry : Germany


ICS :National Ref : 02600092Title : Measuring- and test parameters for cold formed cylindrical helical compression springs




ICS : 21.060.10National Ref : DIN 7513Title : Thread cutting screws - Hexagon screws and slotted head screws - Dimensions,

requirements, testing




ICS : 21.060.10National Ref : DIN 7516Title : Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing



Subsector I11: MACHINE TOOLS



ICS :National Ref : 03101075Title : Firefighting and fire protection - Portable generator - Part 1: Generating set <größer =>

5kVA

Relatedness :National : New



ICS :National Ref : 03101076Title : Firefighting and fire protection - Portable generator - Part 2: Generating set <kleiner> 5

kVA



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2016-06-22Organization : ASICountry : Austria


ICS : 11.040.60National Ref : ÖNORM S 5292-1Title : Medical remote-controlled automatically-driven afterloading systems - Part 1: Acceptance

testing of functional performance characteristicsScope : This ÖNORM applies to medical remote-controlled automatically-driven afterloading

systems and specifies the acceptance testing of such systems.




ICS : 27.120.01National Ref : DIN 25488-1Title : Components for hot cells - Part 1: Requirements on design for remote handling




ICS :National Ref : 08000281Title : Procedures of dosimetry with probe-type detectors for proton and ion radiation Part 1:

Ionization chambers



Subsector I28: FLUID POWER



ICS :National Ref : 06234987Title : Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements




ICS :National Ref : 06234988Title : Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements




ICS :National Ref : 06234989Title : Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements



Subsector I31: VALVES



ICS :National Ref : 00300642Title : Valves for drinking water installations on private premises - Anti-vacuum valve Types D

and E - Requirements and tests


Subsector : I31 Registration Date : 2016-06-13Organization : TSECountry : Turkey

Project ID : 0t111098/0001 Project Established

ICS : 83.080National Ref :Title : Blistered panels - High density polyethylene (HDPE) - Used for foundation wall protection

and drainage worksScope : This standard covers blistered panels used for foundation wall protection and drainage

works of High density polyethylene (HDPE)



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL

Subsector : M01 Registration Date : 2016-06-22Organization : ASICountry : Austria


ICS : 77.140.15, 91.080.40National Ref : ÖNORM B 4707Title : Steel for the reinforcement of concrete - Requirements and classificationScope : This ÖNORM specifies requirements and the reinforcement steel grades of weldable

reinforcing steel used for the reinforcement of concrete structures. This ÖNORM dealt with bars, reinforcing steel manufactured in coils and subsequently straightened, coils for further machine processing in de-coiling machines and also sheets and lattice girders of factory-made machine-welded fabric.



Subsector M05: WELDING

Subsector : M05 Registration Date : 2016-06-20Organization : DINCountry : Germany


ICS : 25.160.01National Ref : DIN 35223Title : Numerical welding simulation - Execution and documentation (ISO/TS 18166:2016);

German version CEN ISO/TS 18166:2016




ICS :National Ref : 09200979Title : Graphical Representation of Welded, Soldered and Brazed Joints - Concepts and Terms

for Soldered and Brazed Joints and Seams



Subsector M16: MECHANICAL TESTS FOR METALS



ICS : 77.040.10National Ref : DIN 50103-3Title : Testing of metallic materials - Rockwell hardness test - Part 3: Modified Rockwell scales

Bm and Fm for thin steel sheet



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2016-06-23Organization : SIST Draft Issue Date : 2016-07-01Country : Slovenia Latest Date for Comments : 2016-10-01


ICS : 85.060, 85.060National Ref : dSIST TS 1190:2016Title : Paper and board (paperboard, cardboard and corrugated board) – Archive quality for

preparation of the record, document, books, and for protection of document materials on paper

Scope : The goal of the document is to define technical bases for conservation of cultural heritage on paper. All the archive type of paper, board, pulps and corrugated fibreboard have to comply with archive quality for preparation of the record, document, books, and for protection of document materials on paper.


Subsector : N01 Registration Date : 2016-06-22Organization : ASICountry : Austria


ICS : 67.250, 85.060National Ref : ÖNORM A 1123Title : Paper and board intended to come into contact with foodstuffs - Conditions for

determination of overall migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant

Scope : This ÖNORM specifies a method to assess the overall migration from paper and board. This test method is developed for paper and board intended to come in contact with dry, non-fatty foodstuffs and paper and board for baking purposes. In individual cases the modified polyphenylenoxide (MPPO) can be seen as a substitute simulant for fatty contact. MPPO can also be seen as a substitute simulant for olive oil.



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2016-06-16Organization : MSZT Draft Issue Date : 2016-07-16Country : Hungary Latest Date for Comments : 2016-08-16


ICS : 75.060, 75.080National Ref : MSZ 1648Title : Natural gas for public utility services


Subsector : N03 Registration Date : 2016-06-16Organization : MSZT Draft Issue Date : 2016-07-16Country : Hungary Latest Date for Comments : 2016-08-16


ICS : 75.080, 93.080National Ref : MSZ 459Title : Determination of Asfaltenes in Crude Petroleum and Petroleum products with n-

HeptaneDetermination of Asfaltenes in Crude Petroleum and Petroleum products with n-Heptane


Subsector : N03 (Secondary Subsector)




ICS : 75.080, 93.080National Ref : MSZ 459Title : Determination of Asfaltenes in Crude Petroleum and Petroleum products with n-

HeptaneDetermination of Asfaltenes in Crude Petroleum and Petroleum products with n-Heptane



Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2016-06-20Organization : DINCountry : Germany


ICS :National Ref : 05401857Title : Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in

German and English



Subsector N11: WOOD-BASED PANELS



ICS :

National Ref : 04200973Title : Wood adhesives - Determination of properties of use of wood adhesives for load-bearing

timber structures



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2016-06-22Organization : NBNCountry : Belgium


ICS :23.040.45, 83.140.30, 91.140.80

National Ref : prNBN T 42-606Title : Plastics piping systems – Polypropylene (PP) modules for water infiltration and storage –

Requirements and methods of test



Subsector N20: CERAMICS



ICS :National Ref : 06234961Title : Ceramics, glass, glass ceramics - Permissible limits for the release of lead and cadmium

from articles intended for use in contact with food



Subsector N21: GASEOUS FUELS AND COMBUSTIBLE GAS

Subsector : N21 Registration Date : 2016-06-28Organization : UNICountry : Italy


ICS : 13.060.50, 13.060.70National Ref : UNI1601755Title : Method for the assessment of potential production of methane from anaerobic digestion

in wet conditions.Scope : This technical specification defines a batch laboratory method for the quantitative

assessment of the biochemical methane production by biodegradation of liquid and solid

organic substrates produced by anaerobic microorganisms. It is not applicable to the assessment of biochemical methane production from digestate if the goal is to determine its Green House Gas emissions and its residual biomethane potential. It refers to tests made in mesophilic and wet conditions, thus on a mixture with a total solid component less than 50 kg/m3 and in a temperature range from 35 to 42°C. The method is applicable to biological tests. Parametric or stoichiometric methods are not in the scope of this technical specification.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2016-06-16Organization : SISCountry : Sweden Latest Date for Comments : 2016-08-16


ICS : 11.140National Ref : 8760002Title : Health care textiles - Fabrics for use in health care - General requirements -

Characteristics, testing and inspectionScope : This standard specifies requirements for health care textiles. This standard also specifies

suitable test methods and criteria for delivery control and for disputes in conjunction with complaints


Subsector : S04 Registration Date : 2016-06-16Organization : SISCountry : Sweden Latest Date for Comments : 2016-08-16


ICS : 11.140National Ref : 8760164Title : Health care textiles – Operating textiles – Clean air suitScope : This standard specifies requirements, design and dress patterns for clean air suit, both

disposable and reusable, for staff at invasive procedures. The clean air suit consists of operating blouse, trousers and hood.


Subsector : S04 Registration Date : 2016-06-09Organization : NENCountry : Netherlands


ICS : 13.340.10National Ref : NEN 8333:2016 Concept nlTitle : Protective clothing - Clothing that protects against ticks and that has been treated with

permethrin Scope : Gives recommendations for the choice of the right protection by visibility protective

clothing. The options given in EN 471 are used. The use and maintenance are described because wear of the visibility goes faster than the wear of the clothing itself.



Subsector S05: DENTISTRY

Subsector : S05 Registration Date : 2016-06-20Organization : DIN

Country : Germany


ICS :National Ref : 01402215Title : Dentistry - Jaw relation recording material



Subsector S06: VIBRATION & SHOCK

Subsector : S06 Registration Date : 2016-06-22Organization : ASICountry : Austria


ICS :03.220.20, 03.220.30, 13.160, 45.080

National Ref : ÖNORM ISO 14837-1Title : Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part

1: General guidanceScope : This ÖNORM provides general guidance on ground-borne vibration generated by the

operation of rail systems, and the resultant ground-borne noise in buildings. It lists the factors and parameters that need to be taken into consideration and offers guidance on prediction methods appropriate for a range of circumstances (e.g. to support the assessment of effects on human occupants and sensitive equipment or operations inside the buildings in addition to the predictions required to assess the risk of damage to building structures). Attention is paid in ISO 14837-1:2005 to characteristics of the source: emission (e.g. train, wheel, rail, track, supporting infrastructure); propagation path: transmission (e.g. ground condition, distance); and receiving structures: immission: (e.g. foundations, form of building construction). The guidance covers all forms of wheel and rail systems, from light-rail to high-speed trains and freight. ISO 14837-1:2005 provides guidance for rail systems at-grade, on elevated structures and in tunnels. It does not deal with vibration arising from the construction and maintenance of the rail system. It does not deal with airborne noise. Structure-radiated noise from elevated structures, which can have a significant environmental impact, is also excluded.



Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2016-06-09Organization : NENCountry : Netherlands


ICS : 13.040.40National Ref : NPR 8114:2016 Concept nl

Title : Stationary source emissions - Quality assurance of automated measuring systemsScope : Gives guidance to the establishment of the procedures of NEN-EN 14181.



Subsector S16: AIDS FOR THE DISABLED

Subsector : S16 Registration Date : 2016-06-20Organization : DINCountry : Germany


ICS :National Ref : 06301806Title : Tactile walking surface indicators in public areas



Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION

Subsector : S20 Registration Date : 2016-06-28Organization : UNICountry : Italy


ICS : 13.030.40National Ref : UNI1601512Title : Refuse collection vehicles - Levels of performance and ways and conditions of

acceptance of street cleaning and municipal waste management services - Part 1: General requirements

Scope : This standard defines general requirements for levels of performance and ways and conditions of acceptance for street cleaning and waste management services, and requirements to be taken into account to draw up and operate service contracts for a better result in terms of qualitative and quantitative performances definition and survey, defining agreements in case of deviations, economic optimization, environmental sustainability and pollution prevention.




ICS : 13.030.40National Ref : UNI1601513Title : Refuse collection vehicles - Levels of performance and ways and conditions of

acceptance for street cleaning and municipal waste disposal services - Part 2: Ways to measure the levels of performance and to settle the acceptance, to draw up and to

operate contracts for general or separate collection services of municipal waste, container cleaning and maintenance, abandoned waste removal

Scope : This standard defines levels of performance, ways and conditions of acceptance and needs to be taken into account to draw up and operate service contracts for: - all kind of waste collection of low or high intensity, normal or fine quality, including or not the measure of the filling levels of the containers; - container cleaning and maintenance; - abandoned waste removal. This standard defines the service elements and parameters, the ways to check and measure them, the catalogue and description of the main fulfilled services, the performance and quality control systems to be taken and the ways to evaluate the supplied levels of performance.




ICS : 13.030.40National Ref : UNI1601559Title : Waste management - Waste visual elements - Visual elements for waste containersScope : This standard defines a way to identify various fractions of waste through visual elements,

including colors, symbols and text. This standard is intended to create a unique operative model in order to clearly identify the waste containers, facilitating collection and recovery/reuse services for both consumers and service managers.




ICS : 35.240.60National Ref : DIN 30756Title : CleANopen - Application profile for municipal vehicles; English version CEN/TR 16815,

only on CD-ROM



Subsector S26: ENVIRONMENTAL MANAGEMENT



ICS : 13.020.10National Ref : UNI1601560Title : Environmental Management of Products - Estimation, reporting and use of the

uncertainty of Life Cycle Assessment (LCA) results - Requirements and guidelinesScope : This standard provides requirements and guidelines for the estimation, reporting and use of

the uncertainty of Life Cycle Assessments results. This standard considers the uncertainty originated from inventory data used in the LCA study.



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2016-06-02Organization : ASRO Draft Issue Date : 2016-11-15Country : Romania Latest Date for Comments : 2017-01-15


ICS : 11.080.99National Ref : SR 13573:2016Title : Sterilization of medical waste – Requirements for development, validation and routine

control of a low temperature sterilization process of medical waste by multi-action treatment using microwave field, ultraviolet light and ozone

Scope : The proposed standard specifies the requirements for the development, validation and routine control of a low temperature sterilisation process of medical waste by multi-action treatment using microwave field, ultraviolet light and ozone. The types of medical waste (i.e. EWC codes - European Waste Catalogue codes) which can be treated for the purpose of sterilisation using the referred sterilisation process are: a) EWC code 18 01 01 (i.e. sharps except 18 01 03*) b) EWC code 18 01 03* (i.e. waste whose collection and disposal is subject to special requirements in order to prevent infection)

Relatedness :

National :REV/AMD Specific documents provided by S. PROCESS INNOVATION NUCLEUS S.R.L, the initiator of the new work item, including the patent nr. 129984, "Method and apparatus for the sterilization of the medical waste".

:



ICS : 13.100, 13.340National Ref : UNI1601920Title : Confined spaces - Classification and safety criteriaScope : Many workplaces contain areas that are considered "confined spaces" because while they

are not necessarily designed for people, they are large enough for workers to enter and perform certain jobs. A confined space also has limited or restricted means for entry or exit and is not designed for continuous occupancy. Confined spaces include, but are not limited to, tanks, vessels, silos, storage bins, hoppers, vaults, pits, manholes, tunnels, equipment housings, ductwork, pipelines, etc. The Presidential Decree 177/2011 requires the observance of obligations for the contracting Employer that don’t take into account the different types of confined spaces (structural or plants differences, work activities, nature

and type of used hazardous substances). The aim of a standard on this topic is to support the Employers in analyzing and assessing whether within the company there are areas which fall within the scope of Presidential Decree 177/2011, bringing operational guidance on their management. In order to access into confined spaces, after preliminary verification at the work, it can be useful to divide the environments in various types, identified either on the basis of structural and plant characteristics both in relation to work activities from which the risk originates. Specific procedures, preventive and protective measures and emergency procedures should be associated with these different types.




ICS :National Ref : 08000283Title : Recording in medical application of ionizing radiation - Part 3: Brachytherapy with

enclosed radiation sources




ICS :National Ref : 08000286Title : Image quality assurance in diagnostic X-ray departments - Part 16: Documentation of

clinical image processing parameters in digital X-ray systems



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2016-06-20Organization : DINCountry : Germany


ICS :National Ref : 13202745Title : Replenishment of ships with liquefied natural gas (LNG) as a fuel - Technical delivery

conditions and test criteria for couplings - Part 1: Dry couplings



Subsector T02: AEROSPACE



ICS : 49.030.99National Ref : DIN 65434Title : Aerospace series - Sleeves - Wall thickness 0,5 mm, for fasteners with reduced

countersunk head; Text in German and English



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2016-06-17Organization : LVS Draft Issue Date : 2016-06-20Country : Latvia Latest Date for Comments : 2016-07-21


ICS : 43.160National Ref : LVS 63:2015/prA1Title : Ministery of Defence - Military police vehicles and Ministery of Internal Affairs vehicles,

their painting and equipmentScope : Standard sets additional requirements for Ministery of Internal Affairs cars and Ministery of

Defence - Military Police vehicles, their painting and equipment

Relatedness :National : REV/AMD LVS 63 :

Subsector : T03 Registration Date : 2016-06-03Organization : BSI Draft Issue Date : 2016-05-24Country : United Kingdom Latest Date for Comments : 2016-07-24


ICS :National Ref : BS 10125:2014+A1Title : Automotive services. Specification for vehicle damage repair process. Amendment


Subsector : T03 Registration Date : 2016-06-07Organization : SISCountry : Sweden Latest Date for Comments : 2016-08-07

Project ID : 550000-1/0001 Project Established

ICS : 43.040.70National Ref : 550000-1Title : Commercial road vehicles –Drawbar coupling – Interchangeability – Installations Scope : This Swedish Standard specifies the characteristics necessary for interchangeability in

installation of drawbar couplings on the frame (cross member, drawbeam or mounting bracket) of towing vehicles for trailer. This Swedish Standard is applicable to drawbar couplings intended for connection to trailers equipped with a drawbar eye on the drawbar of the trailer. Characteristics not specified are left to the discretion of the component manufacturer.




ICS : 43.040.70National Ref : 550000-2Title : Commercial road vehicles – 57 mm clevis coupling – InterchangeabilityScope : This Swedish Standard specifies the characteristics necessary for interchangeability in

application of clevis couplings 57 mm to tow a trailer. This Swedish Standard is applicable to 57 mm clevis couplings intended for connection to trailers equipped with a SS550100-2 57 mm drawbar eye on the drawbar of the trailer.




ICS : 43.040.70National Ref : 550100-1Title : Commercial road vehicles –drawbar eye – Interchangeability – Installations Scope : This Swedish Standard specifies the characteristics of drawbar eyes installations, necessary

for interchangeability in installation to a drawbar of a towed trailer. This Swedish Standard is applicable to mechanical connections designed for commercial

vehicles and trailers, the maximum mass of which is above 3,5 t.




ICS : 43.040.70National Ref : 550100-2Title : Commercial road vehicles – 57 mm drawbar eye – InterchangeabilityScope : This Swedish Standard specifies the characteristics of 57 mm drawbar eyes, necessary for

interchangeability in applications together with drawbar eyes 57 mm to tow a trailer. This Swedish Standard is applicable to mechanical connections designed for commercial vehicles and trailers, the maximum mass of which is above 3,5 t..



Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT

Subsector : T09 Registration Date : 2016-06-22Organization : ASICountry : Austria


ICS : 55.180.99National Ref : ÖNORM B 4920-3Title : Terminals for transshipment of goods - Planning - Part 3: Railway sidingsScope : This ÖNORM is to be used as basis for the planning of new railway sidings for cargo transfer

and for changes of existing plants. It is valid in principle for railway sidings with a rule track gauge of 1,435 mm (standard gauge) and can be used in a general manner also for railway sidings with other track gauges (narrow gauge).


Subsector : T09 Registration Date : 2016-06-22Organization : ASICountry : Austria


ICS : 55.180.99National Ref : ÖNORM B 4920-5Title : Terminal for transshipment of goods - Planning - Part 5: Terminals for combined trafficScope : This Austrian standard applies to the planning of terminals for combined traffic. Depending

on the concerned transport modes (road, rail, water) it shall be used together with ÖNORM B 4920-1 to -4 and -6. It deals with common transshipment types of combined traffic. Combined traffic involving aircraft is not included. In this regard see the list of standards in the bibliography.



Subsector T14: PACKAGING



ICS : 55.080National Ref : DIN 55445-1Title : Packaging test - Testing of seams of sacks - Part 1: Determination of endurance of

seams of paper sacks



Subsector T18: ELEVATING PLATFORMS

Subsector : T18 Registration Date : 2016-06-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 7981Title : Code of practice for the installation, maintenance, thorough examinationand

safe use of mast climbing work platforms (MCWPs)


Subsector : T18 Registration Date : 2016-06-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 5974Title : Temporary suspended access equipment



** End of Sector **




Sector X : UNDETERMINED STANDARDIZATION AREA


Subsector X01: UNDETERMINED STANDARDIZATION AREA (NON-ELECTRICAL)

Subsector : X01 Registration Date : 2016-06-03Organization : IPQ Draft Issue Date : 2016-05-15Country : Portugal Latest Date for Comments : 2016-06-15

Project ID : C1791612/0001 Draft for public enquiry

ICS : 03.100National Ref : prNP 4552Title : Management system reconciling professional, family and personal life. RequirementsScope : This Standard sets out the requirements of a management system that allows an organization

to develop and implement politics, practices, goals, coherent actions and others that said organization may already have, in terms of Conciliation. The requirements are generic and intended to be appllicable to all organizations, public or private, regardless of type, size or juridic status, that want: a) To establish, implement, maintain and improve a Conciliation management system between professional, family and personal life. b) To make sure of the conformity with the Conciliation politics and practices already adopted.



** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2016-06-27Organization : SISCountry : Sweden Latest Date for Comments : 2016-08-27


ICS : 35.110National Ref : 308100Title : Reference architecture for Internet of ThingsScope : This International Standard specifies the general IoT Reference Architecture in terms of

defining System Characteristics, the Conceptual Model, Reference Model and Architecture Views for IoT.


Subsector : Z99 Registration Date : 2016-06-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 31111Title : Cyber risk and resilience. Guide



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC

June 2016

Issued on : 1 July 2016

Information Procedure on Standards

Notifications registered at CCMC during June 2016

Sector W : ELECTRICAL ENGINEERING

Register issued on : 1 July 2016

Subsector W08: ELECTRIC CABLES

Subsector : W08 Registration Date : 2016-06-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 7671Title : Electrical Installations of Buildings



Subsector W11: ELECTRICAL ACCESSORIES

Subsector : W11 Registration Date : 2016-06-24Organization : CEB-BECCountry : Belgium


ICS : 29.120.30National Ref : NBN C 61-112-1Title : Plugs and socket-outlets for household and similar purposes. Part 1 : General

Relatedness :National : REV/AMD NBN C 61-112-1 (2010) :


Subsector W27: ELECTRICAL INSTALLATIONS IN BUILDINGS

Subsector : W27 Registration Date : 2016-06-30Organization : MSZT Draft Issue Date : 2016-07-30Country : Hungary Latest Date for Comments : 2016-08-30


ICS : 29.020, 29.020National Ref : MSZ 1585Title : Operation of electrical installations (EN 50110-1 and national supplementations)


Subsector : W27 (Secondary Subsector)




ICS : 29.020, 29.020National Ref : MSZ 1585Title : Operation of electrical installations (EN 50110-1 and national supplementations)



** End of Sector **



Sector X : UNDETERMINED STANDARDIZATION AREA


Subsector X01: UNDETERMINED STANDARDIZATION AREA (NON-ELECTRICAL)

Subsector : X01 Registration Date : 2016-06-03Organization : IPQ Draft Issue Date : 2016-05-15Country : Portugal Latest Date for Comments : 2016-06-15

Project ID : C1791612/0001 Draft for public enquiry

ICS : 03.100National Ref : prNP 4552Title : Management system reconciling professional, family and personal life. RequirementsScope : This Standard sets out the requirements of a management system that allows an organization

to develop and implement politics, practices, goals, coherent actions and others that said organization may already have, in terms of Conciliation. The requirements are generic and intended to be appllicable to all organizations, public or private, regardless of type, size or juridic status, that want: a) To establish, implement, maintain and improve a Conciliation management system between professional, family and personal life. b) To make sure of the conformity with the Conciliation politics and practices already adopted.



** End of Sector **



Sector Z : CCMC/CEN/CLC


Subsector Z99: UNDETERMINED




















** End of Sector **

List of Subsectors covering work items in CENELEC’s field of activity

(version 2009-05-15)

(Rows or committees shaded in blue indicate changes compared to the last list of subsectors )

U GENERAL ELECTROTECHNICAL STANDARDS

Title IEC TC CLC TC

U01 INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS

IEC TC 3 IEC SC 3C IEC SC 3D

U02 ALUMINIUM CONDUCTORS. IEC TC 7

U03 SYSTEM ASPECTS FOR ELECTRICAL ENERGY SUPPLY IEC TC 8 CLC TC 8X

U04 ELECTRICAL FLUIDS. IEC TC 10 BTTF 116-1

U05 ELECTRICAL INSULATING MATERIALS AND SYSTEMS. IEC TC 15 IEC TC112

U06 MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION MARKINGS.

IEC TC 16

U07 LETTER SYMBOLS FOR ELECTROTECHNOLOGY. IEC TC 25

U08 ELECTRIC WELDING. IEC TC 26 CLC TC 26A CLC TC 26B

U09 INSULATION CO-ORDINATION. IEC TC 28 IEC TC 109

U10 HIGH-VOLTAGE TESTING. IEC TC 42

U11 ENVIRONMENTAL TESTING OF ELECTROTECHNICAL EQUIPMENT

IEC TC 89 IEC TC 104

U12 RELIABILITY. IEC TC 56

U15 MAGNETIC ALLOYS. IEC TC 68

U16 PROTECTION BY ENCLOSURES. IEC TC 70

U17 SHORT CIRCUIT CURRENTS. IEC TC 73

U18 ENVIRONMENTAL STANDARDIZATION - GENERAL IEC TC 111 CLC TC 111X

U19 RADIO INTERFERENCE, EMC IEC TC 77 + SCs CISPR + SCs

CLC TC 210

U20 SUPERCONDUCTIVITY IEC TC 90

U21 NANOTECHNOLOGY IEC TC 113

U91 QUALITY ASSURANCE ISO TC 176 BTTF 76-3

U92 ADVANCED CERAMICS IEC TC *

U93 ELECTROMAGNETIC HAZARDS IEC TC 106 CLC TC 106X

U94 PUBLIC PROCUREMENT MATTERS CLC TC 218

U95 ENVIRONMENTAL MATTERS BTWG 132-3

U96 USABILITY & SAFETY OF ELECTRICAL PRODUCTS WITH REFERENCE TO PEOPLE WITH SPECIAL NEEDS

BTWG 101-5

U99 UNDETERMINED. (ex: terminology) IEC TC 1

V ELECTRONIC ENGINEERING

Title IEC TC CLC TC

V01 RADIOCOMMUNICATIONS AND CABLE NETWORKS IEC TC 103 CLC TC 209

V02 ELECTRICAL MEASURING EQUIPMENT. IEC TC 13 CLC TC 13 BTWG 105-2

V03 ELECTROACOUSTICS AND ULTRASONICS. IEC TC 29 IEC TC 87

V04 INSTRUMENT TRANSFORMERS. IEC TC 38 CLC TC 38X

V05 ELECTRONIC TUBES. IEC TC 39

V06 CAPACITORS AND RESISTORS. IEC TC 40 CLC TC 40XA CLC TC 40XB

V07 NUCLEAR INSTRUMENTATION. IEC TC 45 IEC SC 45A IEC SC 45B

CLC TC 45AX CLC TC45B

V08 CABLES AND WIRES FOR TELECOMMUNICATIONS IEC TC 46 + SCs CLC TC 46X + SCs

V09 SEMICONDUCTORS. IEC TC 47 + SCs IEC TC 110

V10 ELECTROMECHANICAL COMPONENTS. IEC TC 48 + SCs IEC TC 91

BTWG 117-1

V11 PIEZOELECTRIC DEVICES. IEC TC 49

V12 MAGNETIC COMPONENTS. IEC TC 51

V13 PRINTED CIRCUITS.

V15 ELECTROMEDICAL EQUIPMENT. IEC TC 62 + SCs CLC TC 62

V16 PROCESS CONTROL. IEC TC 65 + SCs CLC TC 65CX BTWG 109-2

V17 ELECTRONIC MEASURING EQUIPMENT. IEC TC 66 IEC TC 85

BTTF126-1

V18 AUTOMATIC CONTROLS. IEC TC 72 CLC TC 72

V19 SAFETY OF DATA PROCESSING EQUIPMENT. Merged into V24

V20 RADIATION SAFETY AND LASER EQUIPMENT. IEC TC 76 CLC TC 76

V21 ALARM SYSTEMS. IEC TC 79 CLC TC 79

V22 NAVIGATIONAL INSTRUMENTS. IEC TC 80

V23 PHOTOVOLTAIC SYSTEMS. IEC TC 82 CLC TC 82

V24 INFORMATION TECHNOLOGY EQUIPMENT AND AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

IEC TC 100 + TAs

IEC TC 108

JTC1/25 & 26

CLC TC 108X CLC TC 205 + SC CLC TC 206 CLC TC 215 CLC/JTC 1

V27 AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

Merged with V24

V28 FIBRE OPTICS. IEC TC 86 + SCs

CLC TC 86A CLC TC 86BXA

V30 DESIGN AUTOMATION IEC TC 93

V31 SURFACE TRANSPORT ELECTROTECHNICAL SYSTEMS

BTTF 69-3

V32 AVIONICS IEC TC 107 CLC TC 107X

W ELECTRICAL ENGINEERING

Title IEC TC CLC TC

W01 ELECTRIC ROTATING MACHINES. IEC TC 2 CLC TC 2

W02 TURBINES: Hydraulic, steam, wind and marine energy IEC TC 4 IEC TC 5 IEC TC 88 IEC TC 114

CLC TC 88

W03 ELECTRIC TRACTION EQUIPMENT. IEC TC 9 CLC TC 9X + SCs

W04 OVERHEAD ELECTRIC LINES. IEC TC 11 CLC TC 11 BTTF 129-1 BTTF 132-1

W05 POWER TRANSFORMERS. IEC TC 14 CLC TC 14

W06 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17A IEC SC 17C

CLC TC 17AC

W07 ELECTRICAL INSTALLATIONS IN SHIPS. IEC TC 18 IEC SC 18A

W08 ELECTRIC CABLES. IEC TC 20 CLC TC 20

W09 SECONDARY BATTERIES. IEC TC 21 IEC SC 21A

CLC TC 21X

W10 POWER ELECTRONICS. IEC TC 22 + SCs CLC TC 22X

W11 ELECTRICAL ACCESSORIES. IEC TC 23 + SCs CLC TC 23BX CLC TC 23E CLC TC 213 BTWG 112-1 BTTF 129-2

W12 ELECTROHEAT. IEC TC 27

W13 EQUIPMENT FOR EXPLOSIVE ATMOSPHERES. IEC TC 31 + SCs

IEC TC 101 CLC TC 31 + SCs

CLC TC 216

W14 FUSES. IEC TC 32 IEC SC 32A

W15 POWER CAPACITORS. IEC TC 33

W16 LAMP AND LUMINAIRES. IEC TC 34 + SCs

CLC TC 34Z

W17 PRIMARY BATTERIES. IEC TC 35

W18 INSULATORS. IEC TC 36 + SCs

CLC TC 36A

W19 SURGE ARRESTERS. IEC TC 37 + SCs

CLC TC 37A

W20 ELECTRICAL RELAYS. IEC TC 94 IEC TC 95

(CLC TC 94)1

W22 ELECTRICAL EQUIPMENT OF MACHINE TOOLS. IEC TC 44 CLC TC 44X

W23 WINDING WIRES. IEC TC 55 CLC TC 55

W24 TELECONTROL SYSTEMS. IEC TC 57

W25 DOMESTIC APPLIANCE PERFORMANCE. IEC TC 59 + SCs CLC TC 59X

W26 DOMESTIC ELECTRICAL APPLIANCES AND MOTOR-OPERATED ELECTRIC TOOLS

IEC TC 61 + SCs

TC 116 CLC TC 61 CLC TC 116 BTTF 128-1

W27 ELECTRICAL INSTALLATIONS IN BUILDINGS. IEC TC 64 CLC TC 64 BTTF 62-3

W28 ELECTRIC VEHICLES. IEC TC 69

W29 ELECTRICAL INSTALLATIONS FOR OUTDOOR SITES

W30 LIVE WORKING. IEC TC 78 CLC TC 78

W31 LIGHTNING PROTECTION. IEC TC 81 CLC TC 81X

W32 LOW-VOLTAGE POWER TRANSFORMERS. IEC TC 96

W33 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17B IEC SC 17D

CLC TC 17B (CLC TC 17D)

1

W34 LOW-VOLTAGE FUSES. IEC SC 32B IEC SC 32C

W35 SYSTEM ENGINEERING AND ERECTION OF ELECTRICAL POWER INSTALLATIONS

IEC TC 99 CLC TC 99X

W36 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES

IEC TC 97 CLC TC 97

W37 FUEL CELL TECHNOLOGIES IEC TC 105

W38 SAFETY OF ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT

CLC TC 204

W39 HIGH VOLTAGE DIRECT CURRENT (HVDC) TRANSMISSION TECHNOLOGY

IEC TC 115

Z IT MATTERS NOT COVERED BY OTHER SUBSECTORS

Z01 CENELEC/ETSI EMC conducted transmission networks JWG EMC

Z02 WORK IN THE FIELD OF ISO/IEC JTC 1 AND SUB-COMMITTEES JTC 1, except WG 25 & 26

1 Dormant

List of symbols typically used by National Committees for their national standards references

CLC REF

EN 55020:2002 EN 55020:2002/A1:2003 Draft Standards

AT ÖVE/ÖNORM EN 55020+A1+A2 ÖVE/ÖNORM EN 55020+A1+A2 E or ENTWURF

BE NBN EN 55020/1:2003 NBN EN 55020/1:2003 PR NBN

CH SN EN 55020:2002 SN EN 55020:2002/A1:2002

CY CYS EN 55020:2002 CYS EN 55020:2002-iss1

CZ CSN EN 55020 ED. 2 CSN EN 55020 ED. 2/A1

DE DIN EN 55020 (VDE 0872-20) DIN EN 55020 (VDE 0872-20) Reference of the future standard or work item number, ex: 02218905

DK DS/EN 55020:2005 DS/EN 55020/A1:2005 Reference of the future standard

EE EVS-EN 55020:2002 EVS-EN 55020:2003/A1:2003 Reference of the future standard

ES UNE-EN 55020:2004 UNE-EN 55020-A1:2004 PNE

FI SFS-EN 55020:2002 SFS-EN 55020:2000/A1:2003 Reference of the future standard

FR NF EN 55020 NF EN 55020/A1 PR NF

GB BS EN 55020:2002 BS EN 55020:2002+A1:2003 Reference of the future standard

GR ELOT EN 55020:2002 ELOT EN 55020/A1:2003 Reference of the future standard

HU MSZ EN 55020:2004 MSZ EN 55020:2004 PR I.S. or Reference of the future standard

IE I.S. EN 55020:2005 I.S. EN 55020/A1:2005

IS IST EN 55020:2002 IST EN 55020:2002/A1:2003

IT CEI EN 55020:2003 CEI EN 55020/A1:2003 Reference of the future standard

LT LST EN 55020+A1:2003 LST EN 55020+A1:2003

LU** EN 55020:2002 EN 55020:2002/A1:2003

LV LVS EN 55020:2002 LVS EN 55020:2002 /A1:2003

MT MSA EN 55020:2002 MSA EN 55020:2002/A1:2003

NL NEN-EN 55020:2002/C12:2005 NEN-EN 55020:2002/A1:2003/C11:2005 ONTWERP NEN

NO NEK EN 55020:2002 NEK EN 55020:2002/A1:2003

PL PN-EN 55020:2003 PN-EN 55020:2003/A1:2003

PT NP EN 55020:2002 NP EN 55020:2002/A1:2003 PR NP

RO SR EN 55020:2003 SR EN 55020:2003/A1:2004

SE SS-EN 55020 SS-EN 55020/A1:2003 Reference of the future standard

SI SIST EN 55020:2003 SIST EN 55020:2003/A1:2003

SK STN EN 55020:2002 STN EN 55020/A1:2003

** Luxembourg applies the CENELEC reference number without a national prefix

Τυποποίησης (CYS), τηλ: Αναπλ. Διευθυντής Τμήματος ... ·...

Documents

Transcript of Τυποποίησης (CYS), τηλ: Αναπλ. Διευθυντής Τμήματος ... ·...