F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford...

14
M-1 M March, 2020 Section M FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure that desired sizes and options are available. Forces created by internal water pressure and external conditions must be restrained. F C 2 W-6 -S H TYPE OF COUPLING FC2W = Ductile Iron Wide Range Coupling (epoxy coated, NBR (Buna-N) gaskets) NOMINAL PIPE SIZE 3 = 3" 4 = 4" 6 = 6" 8 = 8" 10 = 10" 12 = 12" 16 = 16" OPTIONAL FEATURES SH = Type 304 Stainless Steel Nuts and Bolts L12 = 12" Long Center Sleeve (sizes 3"-12") EPDM = EPDM Gasket EC = End Cap with 2" FIP Threaded Boss (sizes 4"-12") BBN = Blue Fluorocarbon Coated Nuts and Bolts (316 stainless steel nuts and bolts available-contact factory) TYPE OF COUPLING M J F A-6 -I NOMINAL PIPE SIZE 3-I = 3" 4-I = 4" 6-I = 6" 8-I = 8" 10-I = 10" 12-I = 12" MJFA = Mechanical Joint Flange Adapter MJC = Mechanical Joint Couplings F C 1-6 9 0-7 2 0 -S H TYPE OF COUPLING FC1 = Ductile Iron Coupling FC2A = Ductile Iron Transition Coupling FIB = Insulating Boot for Ductile Iron Pipe and Cast Iron Pipe FFCA = Iron Flanged Coupling Adapter FRR = Cut-In Coupling FEC = End Cap Coupling O.D. SIZE Use listed catalog sizes NOTE: For most coupling types each number indicates top end of range, only FC1 and FC2A have an O.D. size for each coupling end. OPTIONAL FEATURES SH = Type 304 Stainless Steel Nuts and Bolts ESH = Type 304 Stainless Steel Nuts and Bolts with Epoxy Coated Coupling N = NBR (Buna-N) Gaskets, Alloy Bolts and Nuts with Shop Coated Coupling EPDM = EPDM Gaskets BBN = Blue Fluorocarbon Coated Nuts and Bolts L12 = 12" Long Center Sleeve Length (for FC1 4" and 6" FC2A 4"-12") FOR FFCA COUPLING ADAPTERS AS2 = Two Anchor Studs AS4 = Four Anchor Studs (316 Stainless Steel Nuts and Bolts available-contact factory) (one end) (other end) IMPORTANT: DOMESTIC PRODUCT COMPLIANCE NOTICE The requirements for defining domestic product can vary among the many regulations, which have previously changed and can subsequently change. Please contact your Ford Customer Service Representative to clarify which Ford products currently meet a specific regulatory requirement (AIS, Buy America, Buy American, DOT, Etc).

Transcript of F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford...

Page 1: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-1

M

March, 2020Section M

FORD BOLTED FLEX COUPLINGSSection M

Ford Bolted Coupling Numbering System

NOTE: See item listings in catalog section to ensure that desired sizes and options are available.Forces created by internal water pressure and external conditions must be restrained.

F C 2 W-6 -S H TYPE OF COUPLING FC2W = Ductile Iron Wide Range Coupling (epoxy coated, NBR (Buna-N) gaskets)

NOMINAL PIPE SIZE 3 = 3" 4 = 4" 6 = 6" 8 = 8" 10 = 10" 12 = 12" 16 = 16"

OPTIONAL FEATURES SH = Type 304 Stainless Steel Nuts and Bolts L12 = 12" Long Center Sleeve (sizes 3"-12") EPDM = EPDM Gasket EC = End Cap with 2" FIP Threaded Boss (sizes 4"-12") BBN = Blue Fluorocarbon Coated Nuts and Bolts (316 stainless steel nuts and bolts available-contact factory)

TYPE OF COUPLING

M J F A-6 -INOMINAL PIPE SIZE 3-I = 3" 4-I = 4" 6-I = 6" 8-I = 8" 10-I = 10" 12-I = 12"

MJFA = Mechanical Joint Flange Adapter MJC = Mechanical Joint Couplings

F C 1-6 9 0-7 2 0 -S H

TYPE OF COUPLING FC1 = Ductile Iron Coupling FC2A = Ductile Iron Transition Coupling FIB = Insulating Boot for Ductile Iron Pipe and Cast Iron Pipe FFCA = Iron Flanged Coupling Adapter FRR = Cut-In Coupling FEC = End Cap Coupling

O.D. SIZEUse listed catalog sizes

NOTE: For most coupling types each number indicates top end of range, only FC1 and FC2A have an O.D. size for each coupling end.

OPTIONAL FEATURES SH = Type 304 Stainless Steel Nuts and Bolts ESH = Type 304 Stainless Steel Nuts and Bolts with Epoxy Coated Coupling N = NBR (Buna-N) Gaskets, Alloy Bolts and Nuts with Shop Coated Coupling EPDM = EPDM Gaskets BBN = Blue Fluorocarbon Coated Nuts and Bolts L12 = 12" Long Center Sleeve Length (for FC1 4" and 6" FC2A 4"-12")

FOR FFCA COUPLING ADAPTERS AS2 = Two Anchor Studs AS4 = Four Anchor Studs (316 Stainless Steel Nuts and Bolts available-contact factory)

(one end) (other end)

IMPORTANT: DOMESTIC PRODUCT COMPLIANCE NOTICEThe requirements for defining domestic product can vary among the many regulations, which have previously changed and can subsequently change. Please contact your Ford Customer Service Representative to clarify which Ford products currently meet a specific regulatory requirement (AIS, Buy America, Buy American, DOT, Etc).

Page 2: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-2

M

March, 2020Section M

FORD DUCTILE IRON COUPLINGSSTYLE FC1

FORD DUCTILE IRON COUPLINGSSTYLE FC1-L12 (12" LENGTHS)

To Order: Locate the gasket range that accommodates your pipe O.D. for both coupling ends. Use the corresponding catalog number. Example: To connect 6.63 O.D. PVC pipe to 7.10 O.D. pipe use catalog number FC1-690-720; for 12" long sleeve FC1-690-720-L12.*Options: SH Standard coated coupling with stainless steel nuts and bolts: Add “-SH” to the catalog number. ESH Epoxy coated coupling with stainless steel nuts and bolts: Add “-ESH” to the catalog number. Example: FC1-690-720-ESH is an FC1 coupling with epoxy coating and stainless steel nuts and bolts. N Coupling with NBR (Buna-N) gaskets: Add “-N” to the catalog number and add 5% of the standard coupling price to the list price.

L P

S C

*O F CN .PS

G R . 1 C . N .

E R

CB

G R . 2 H

C . N .

ER

C

CSL

N .

B

A .W .L .

SCN

SS B

SH

E C S.S. BESH

4"

4.004.004.00

4.50-4.804.50-4.804.80-5.10

RedRedRedRedRed

Black

4.004.50-4.804.80-5.104.50-4.804.80-5.104.80-5.10

RedRed

BlackRed

BlackBlack

12" 3 29

FC1-400-400-L12FC1-400-480-L12FC1-400-510-L12FC1-480-480-L12FC1-480-510-L12FC1-510-510-L12

$ 189.94 $ 267.68 $ 348.71

6"

6.006.006.006.30

6.63-6.906.63-6.906.90-7.20

RedRedRedRedRedRed

Black

6.006.63-6.906.90-7.20

6.306.63-6.906.90-7.206.90-7.20

RedRed

BlackRedRed

BlackBlack

12" 4 42

FC1-600-600-L12FC1-600-690-L12FC1-600-720-L12FC1-630-630-L12FC1-690-690-L12FC1-690-720-L12FC1-720-720-L12

268.84 372.52 492.67

L P

S C

*O F CN .PS

G R . 1 C . N .

E R

CB

G R . 2 H

C . N .

ER

C

CSL

N .

B

A .W .L .

SCN

SS B

SH

E C S.S. B

ESH2" 2.34-2.63 Red 2.34-2.63 Red 4" 2 6 FC1-263-263 $ 65.35 $ 90.46 $ 106.61

2-1/2" See 2" FC2A on page M-4

4"

4.004.004.00

4.50-4.804.50-4.804.80-5.10

RedRedRedRedRed

Black

4.004.50-4.804.80-5.104.50-4.804.80-5.104.80-5.10

RedRed

BlackRed

BlackBlack

5" 3 14

FC1-400-400FC1-400-480FC1-400-510FC1-480-480FC1-480-510FC1-510-510

116.12 161.16 200.23

6"

6.006.006.006.30

6.63-6.906.63-6.906.90-7.20

RedRedRedRedRedRed

Black

6.006.63-6.906.90-7.20

6.306.63-6.906.90-7.206.90-7.20

RedRed

BlackRedRed

BlackBlack

5" 4 20

FC1-600-600FC1-600-690FC1-600-720FC1-630-630FC1-690-690FC1-690-720FC1-720-720

158.40 218.47 276.43

8"

8.008.008.00

8.16-8.408.63-9.058.63-9.059.05-9.40

RedRedRedRedRedRed

Black

8.008.63-9.059.05-9.408.16-8.408.63-9.059.05-9.409.05-9.40

RedRed

BlackBlackRed

BlackBlack

5" 5 29

FC1-800-800FC1-800-905FC1-800-940FC1-840-840FC1-905-905FC1-905-940FC1-940-940

211.40 281.28 363.76

10" 10.20-10.50

10.7510.75

11.10-11.46

RedRedRed

Black

10.20-10.5010.75

11.10-11.4611.10-11.46

RedRed

BlackBlack

6" 6 41.5FC1-1050-1050FC1-1075-1075FC1-1075-1146FC1-1146-1146

284.82 368.65 484.98

12" 12.24-12.50

12.7512.75

13.20-13.56

RedRedRed

Black

12.24-12.5012.75

13.20-13.5613.20-13.56

RedRed

BlackBlack

6" 7 54.5FC1-1250-1250FC1-1275-1275FC1-1275-1356FC1-1356-1356

328.62 426.47 584.48

Page 3: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-3

M

March, 2020Section M

N .PS

GC N

LP

E RC N

LP

C SC N

LP

B NC N

LP

2" FC1G-234-263 $ 5.62 FC1-RER-2 $ 10.08 FC1-CS-2 $ 20.56 FBN-58-65 $ 6.66

4"FC1G-400FC1G-450-480FC1G-480-510

13.40 FC1-RER-4FC1-BER-4 18.42 FC1-CS-4 29.00 FBN-58-8 7.83

6"FC1G-600FC1G-630FC1G-663-690FC1G-690-720

14.49FC1-BER-6FC1-RER-6FC1-BER-6

24.56 FC1-CS-6 49.11 FBN-58-8 7.83

8"FC1G-800FC1G-816-840FC1G-863-905FC1G-905-940

18.42 FC1-RER-8FC1-BER-8 29.00 FC1-CS-8 77.56 FBN-58-8 7.83

10"FC1G-1020-1050FC1G-1075FC1G-1110-1146

22.32 FC1-RER-10FC1-BER-10 42.31 FC1-CS-10 101.92 FBN-58-9 8.92

12"FC1G-1224-1250FC1G-1275FC1G-1320-1356

40.85 FC1-RER-12FC1-BER-12 51.30 FC1-CS-12 107.11 FBN-58-9 8.92

N .PS

GC . N .

LP

E RC N

LP

C SC N

LP

B NC N

LP

4"FC1G-400FC1G-450-480FC1G-480-510

$ 13.40 FC1-RER-4FC1-BER-4 $ 18.42 FC1-CS-4-L12 $ 102.86 FBN-58-155 $ 18.33

6"FC1G-600FC1G-630FC1G-663-690FC1G-690-720

14.49FC1-BER-6FC1-RER-6FC1-BER-6

24.56 FC1-CS-6-L12 129.11 FBN-58-155 18.33

COMPONENT PARTS FOR STYLE FC1 COUPLINGALL COMPONENTS ARE PRICED “EACH”

COMPONENT PARTS FOR STYLE FC1-L12 COUPLING (12" LENGTHS)ALL COMPONENTS ARE PRICED “EACH”

Page 4: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-4

M

March, 2020Section M

To Order: Locate the gasket range that accommodates your pipe O.D. for both coupling ends. Use the top range of each gasket size to determine the catalog number. Example: To connect 6.63 O.D. PVC pipe to 6.90 O.D. pipe use catalog number FC2A-663-720. *Options: SH Standard coated coupling with stainless steel nuts and bolts: Add “-SH” to the catalog number. ESH Epoxy coated coupling with stainless steel nuts and bolts: Add “-ESH” to the catalog number. Example: FC2A-690-720-ESH is an FC2A coupling with epoxy coating and stainless steel nuts and bolts. N Coupling with NBR (Buna-N) gaskets: Add “-N” to the catalog number and add 5% of the standard coupling price to the list price.

Note: Gaskets for SDR 35 sewer pipe are available in the following sizes: 4.22", 6.23", 10.50" and 12.50". Use these sizes as part of the catalog number. Contact factory for pricing.

FORD TRANSITION COUPLINGSSTYLE FC2A

L P

SC

*O F CN .PS

G R 1 C . N .

E R

CB

G R2 C . N .

ER

C

CSL

N .

B

A .W .L .

SS B

SH

E C S.S. B

ESH

2" 2.30-2.452.40-2.652.65-2.88

BlackBlackBlack

2.30-2.452.40-2.652.65-2.88

Black Black Black

4" 2 9 $ 65.74 $ 90.82 $ 116.29

3"

3.133.45-3.603.70-3.883.91-4.064.07-4.20

RedRed

BlackBlackBlack

3.133.45-3.603.70-3.883.91-4.064.07-4.20

RedRed

BlackBlackBlack

4" 3 14 107.81 145.49 185.01

4"4.004.50

4.80-5.145.15-5.57

RedRed

BlackWhite/Gray

4.004.50

4.80-5.145.15-5.57

RedRed

BlackWhite/Gray

5" 3 16 127.41 172.46 217.46

6"6.006.63

6.90-7.207.21-7.56

RedRed

BlackWhite/Gray

6.006.63

6.90-7.207.21-7.56

RedRed

BlackWhite/Gray

5" 4 24 173.82 233.89 302.13

8"8.008.63

9.05-9.409.40-9.74

RedRed

BlackWhite/Gray

8.008.63

9.05-9.409.40-9.74

RedRed

BlackWhite/Gray

5" 5 34 220.05 295.10 389.23

10"

10.0010.75

11.10-11.4011.42-11.7711.77-12.12

RedRed

BlackBlack

White/Gray

10.0010.75

11.10-11.4011.42-11.7711.77-12.12

RedRed

BlackBlack

White/Gray

6" 6 48 302.71 386.53 525.38

12"

12.0012.75

13.20-13.5013.69-14.0414.03-14.38

BlackBlackBlack

White/GrayWhite/Gray

12.0012.75

13.20-13.5013.69-14.0414.03-14.38

BlackBlackBlack

White/GrayWhite/Gray

6" 7 62 360.66 458.48 631.38

14"15.30-15.7016.00-16.3516.40-16.88

BlackRed

White/Gray

15.30-15.7016.00-16.3516.40-16.88

BlackRed

White/Gray6" 9 79 595.94 780.18 997.32

16"17.40-17.8018.45-18.9718.90-19.20

BlackWhite/GrayWhite/Gray

17.40-17.8018.45-18.9718.90-19.20

BlackWhite/GrayWhite/Gray

6" 10 103 717.56 922.26 1208.09

18" 19.50-20.00 Black 19.50-20.00 Black 7" 11 111 1089.18 1314.36 1631.1320" 21.60-22.06 Black 21.60-22.06 Black 7" 12 125 1306.21 1551.86 1886.1424" 25.80-26.32 Black 25.80-26.32 Black 10" 14 183 2221.64 2542.99 2923.28

Page 5: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-5

M

March, 2020Section M

NBR (BUNA-N) INSULATING BOOT FOR DUCTILE IRON PIPE AND CAST IRON PIPE

COMPONENT PARTS FOR STYLE FC2A TRANSITION COUPLINGS

Note: The FIB adds .25" to the pipe O.D. This additional O.D. must be considered when ordering accompanying coupling.

N .PS

SBR GC N

RL

PCC

E RCN

LP

C SCN

LP

N BCN

BS

LP

2" FC2AG-230-245FC2AG-240-265FC2AG-265-288

$ 8.11 ea. Black FC2A-BER-2 $ 9.65 ea. FC2A-CS-2 $ 14.64 FBN-58-65 5/8" x 6-1/2" $ 6.66 ea.

3"FC2AG-345-360FC2AG-370-388FC2AG-391-406FC2AG-407-420

13.40 ea.Red FC2A-RER-3

13.40 ea. FC2A-CS-3 27.70 FBN-58-65 5/8" x 6-1/2" 6.66 ea.BlackBlackBlack

FC2A-BER-3

4"FC2AG-400FC2AG-450FC2AG-480-514FC2AG-515-557

16.74 ea.

RedRed FC2A-RER-4

16.84 ea. FC2A-CS-4 36.84 FBN-58-8 5/8" x 8" 7.83 ea.Black FC2A-BER-4White/Gray FC2A-WER-4

6"FC2AG-600FC2AG-663FC2AG-690-720FC2AG-721-756

17.51 ea.

RedRed FC2A-RER-6

23.05 ea. FC2A-CS-6 61.32 FBN-58-8 5/8" x 8" 7.83 ea.Black FC2A-BER-6White/Gray FC2A-WER-6

8"FC2AG-800FC2AG-863FC2AG-905-940FC2AG-940-974

22.32 ea.

RedRed FC2A-RER-8

35.81 ea. FC2A-CS-8 64.71 FBN-58-8 5/8" x 8" 7.83 ea.Black FC2A-BER-8White/Gray FC2A-WER-8

10"

FC2AG-1000FC2AG-1075FC2AG-1110-1140FC2AG-1142-1177FC2AG-1177-1212

27.88 ea.

RedRed FC2A-RER-10

39.37 ea. FC2A-CS-10 114.65 FBN-58-9 5/8" x 9" 8.92 ea.BlackBlack FC2A-BER-10

White/Gray FC2A-WER-10

12"

FC2AG-1200FC2AG-1275FC2AG-1320-1350FC2AG-1369-1404FC2AG-1403-1438

30.12 ea.

BlackBlackBlack

FC2A-BER-1259.75 ea. FC2A-CS-12 118.44 FBN-58-9 5/8" x 9" 8.92 ea.

White/GrayWhite/Gray FC2A-WER-12

14"FC2AG-1530-1570FC2AG-1600-1635FC2AG-1640-1688

51.99 ea.BlackRed

White/Gray

FC2A-BER-14FC2A-RER-14FC2A-WER-14

99.48 ea. FC2A-CS-14 210.15 FBN-58-105 5/8" x 10-1/2" 9.48 ea.

16"FC2AG-1740-1780FC2AG-1845-1897FC2AG-1890-1920

58.49 ea.Black FC2A-BER-16

119.75 ea. FC2A-CS-16 269.09 FBN-58-105 5/8" x 10-1/2" 9.48 ea.White/GrayWhite/Gray FC2A-WER-16

18" FC2AG-1950-2000 69.29 ea. Black FC2A-BER-18 226.07 ea. FC2A-CS-18 397.08 FBN-58-105 5/8" x 10-1/2" 9.48 ea.20" FC2AG-2160-2206 73.64 ea. Black FC2A-BER-20 253.20 ea. FC2A-CS-20 542.20 FBN-58-105 5/8" x 10-1/2" 9.48 ea.24" FC2AG-2580-2632 77.97 ea. Black FC2A-BER-24 573.72 ea. FC2A-CS-24 736.48 FBN-58-135 5/8" x 13-1/2" 15.47 ea.

For optional NBR (Buna-N) gasket add “-N” to the catalog number. Contact factory for price.

D.I. PO.D.

CN

A .W . L .

LP

4.80 FIB-480 0.7 $ 49.496.90 FIB-690 1.0 60.739.05 FIB-905 1.3 71.8511.10 FIB-1110 1.5 82.7213.20 FIB-1320 1.9 94.04

Page 6: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-6

M

March, 2020Section M

To Order: Locate the gasket range that accommodates your pipe O.D. for both coupling ends. Use the top range of each gasket size to determine the catalog number. Example: To connect 6.63 O.D. PVC pipe to 6.90 O.D. pipe use catalog number FC2A-663-720-L12. *Options: SH Standard coated coupling with stainless steel nuts and bolts: Add “-SH” to the catalog number. ESH Epoxy coated coupling with stainless steel nuts and bolts: Add “-ESH” to the catalog number. Example: FC2A-690-720-L12-ESH is an FC2A coupling with epoxy coating and stainless steel nuts and bolts. N Coupling with NBR (Buna-N) gaskets: Add “-N” to the catalog number and add 5% of the standard coupling price to the list price.

Note: Gaskets for SDR 35 sewer pipe are available in the following sizes: 4.22", 6.23", 10.50" and 12.50". Use these sizes as part of the catalog number. Contact factory for pricing.

FORD TRANSITION COUPLINGSSTYLE FC2A-L12 (12" LENGTHS)

L P

SC

*O F CN .PS

G R 1

C . N .

E R

CB

G R2 C . N .

ER

C

CSL

N .

B

A .W .L .

SS B

SH

E C S.S. B

ESH

4"4.004.50

4.80-5.145.15-5.57

RedRed

BlackWhite/Gray

4.004.50

4.80-5.145.15-5.57

RedRed

BlackWhite/Gray

12" 3 34 $ 231.27 $ 309.03 $ 404.03

6"6.006.63

6.90-7.207.21-7.56

RedRed

BlackWhite/Gray

6.006.63

6.90-7.207.21-7.56

RedRed

BlackWhite/Gray

12" 4 48 288.28 391.93 526.05

8"8.008.63

9.05-9.409.40-9.74

RedRed

BlackWhite/Gray

8.008.63

9.05-9.409.40-9.74

RedRed

BlackWhite/Gray

12" 5 63 368.11 497.68 631.80

10"

10.0010.75

11.10-11.4011.42-11.7711.77-12.12

RedRed

BlackBlack

White/Gray

10.0010.75

11.10-11.4011.42-11.7711.77-12.12

RedRed

BlackBlack

White/Gray

12" 6 83 509.24 664.73 896.65

12"

12.0012.75

13.20-13.5013.69-14.0414.03-14.38

BlackBlackBlack

White/GrayWhite/Gray

12.0012.75

13.20-13.5013.69-14.0414.03-14.38

BlackBlackBlack

White/GrayWhite/Gray

12" 7 106 595.63 777.04 1073.23

Steel Size PVC x Ductile Iron A/C x C900 PVC Steel Size PVC x Steel Size PVC

Page 7: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-7

M

March, 2020Section M

NBR (BUNA-N) INSULATING BOOT FOR DUCTILE IRON PIPE AND CAST IRON PIPE

COMPONENT PARTS FOR STYLE FC2A-L12 TRANSITION COUPLINGS (12" LENGTHS)

Note: The FIB adds .25" to the pipe O.D. This additional O.D. must be considered when ordering accompanying coupling.

N .PS

SBR GC N .

RL

PCC

E RCN

LP

C SCN

LP

N B

CN

BS

LP

4"FC2AG-400FC2AG-450FC2AG-480-514FC2AG-515-557

$ 16.74 ea.

RedRed FC2A-RER-4

$ 16.84 ea. FC2A-CS-4-L12 $ 117.87 FBN-58-155 5/8" x 15-1/2" $ 18.33 ea.Black FC2A-BER-4White/Gray FC2A-WER-4

6"FC2AG-600FC2AG-663FC2AG-690-720FC2AG-721-756

17.51 ea.RedRed FC2A-RER-6

23.05 ea. FC2A-CS-6-L12 145.31 FBN-58-155 5/8" x 15-1/2" 18.33 ea.Black FC2A-BER-6White/Gray FC2A-WER-6

8"FC2AG-800FC2AG-863FC2AG-905-940FC2AG-940-974

22.32 ea.

RedRed FC2A-RER-8

35.81 ea. FC2A-CS-8-L12 174.72 FBN-58-155 5/8" x 15-1/2" 18.33 ea.Black FC2A-BER-8White/Gray FC2A-WER-8

10"

FC2AG-1000FC2AG-1075FC2AG-1110-1140FC2AG-1142-1177FC2AG-1177-1212

27.88 ea.

RedRed FC2A-RER-10

39.37 ea. FC2A-CS-10-L12 282.04 FBN-58-155 5/8" x 15-1/2" 18.33 ea.BlackBlack FC2A-BER-10

White/Gray FC2A-WER-10

12"

FC2AG-1200FC2AG-1275FC2AG-1320-1350FC2AG-1369-1404FC2AG-1403-1438

30.12 ea.

BlackBlackBlack

FC2A-BER-1259.75 ea. FC2A-CS-12-L12 307.75 FBN-58-155 5/8" x 15-1/2" 18.33 ea.

White/GrayWhite/Gray FC2A-WER-12

D.I. PO.D.

CN

A .W . L .

LP

4.80 FIB-480 0.7 $ 49.496.90 FIB-690 1.0 60.739.05 FIB-905 1.3 71.8511.10 FIB-1110 1.5 82.7213.20 FIB-1320 1.9 94.04

Page 8: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-8

M

March, 2020Section M

FORD “ULTRA-FLEX” WIDE RANGE COUPLINGS-STYLE FC2W

Epoxy coating and NBR (Buna-N) gaskets are standard with FC2W couplings.* SH = Option for FC2W couplings with stainless steel nuts and bolts. Add “-SH” to the catalog number. Example: FC2W-6-SH

N .PS

R(I )

R( )

CN

N B

SL

A .W . L .

L PS C .I E

S S BO *-SH

3" 2.50-4.29 63.5-109.0 FC2W-3 3 7" 27 $ 185.11 $ 252.554" 3.96-5.60 100.6-142.2 FC2W-4 4 7" 35 199.72 293.706" 6.23-7.60 158.2-193.0 FC2W-6 4 7" 44 282.49 376.478" 8.40-9.75 213.3-247.6 FC2W-8 4 7" 52 329.82 423.76

10" 10.75-12.12 273.0-307.8 FC2W-10 6 9" 76 422.02 580.0712" 12.75-14.38 323.8-365.25 FC2W-12 6 9" 97 497.99 656.0616" 16.00-17.80 406.4-452.12 FC2W-16 8 10" 135 1135.21 1342.53

COMPONENT PARTS FOR STYLE FC2W “ULTRA-FLEX” WIDE RANGE COUPLINGSALL COMPONENTS ARE PRICED “EACH”

N .PS

GC . N .

LP

E RC . N .

L P

CSC . N .

LP

N B

C . .L

P3" FC2WG-3 $ 24.53 FC2W-ER-3 $ 23.53 FC2W-CS-3 $ 53.94 FBN-58-1125 $ 12.004" FC2WG-4 26.91 FC2W-ER-4 25.68 FC2W-CS-4 55.22 FBN-58-1125 12.006" FC2WG-6 40.72 FC2W-ER-6 39.17 FC2W-CS-6 81.49 FBN-58-1125 12.008" FC2WG-8 47.64 FC2W-ER-8 44.67 FC2W-CS-8 103.96 FBN-58-1125 12.00

10" FC2WG-10 51.99 FC2W-ER-10 45.61 FC2W-CS-10 127.47 FBN-58-135 15.4712" FC2WG-12 64.68 FC2W-ER-12 52.33 FC2W-CS-12 162.41 FBN-58-135 15.4716" FC2WG-16 146.75 FC2W-ER-16 168.93 FC2W-CS-16 443.51 FBN-58-155 18.33

Page 9: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-9

M

March, 2020Section M

COMPONENT PARTS FOR STYLE FC2W-L12 “ULTRA-FLEX” WIDE RANGE COUPLINGSALL COMPONENTS ARE PRICED “EACH”

N .PS

GC . N .

LP

E RC . N .

L P

12" CSC . N .

LP

N B

C . .L

P3" FC2WG-3 $ 24.53 FC2W-ER-3 $ 23.53 FC2W-CS-3-L12 $ 121.90 FBN-58-165 $ 19.224" FC2WG-4 26.91 FC2W-ER-4 25.68 FC2W-CS-4-L12 130.22 FBN-58-165 19.226" FC2WG-6 40.72 FC2W-ER-6 39.17 FC2W-CS-6-L12 152.87 FBN-58-165 19.228" FC2WG-8 47.64 FC2W-ER-8 44.67 FC2W-CS-8-L12 271.07 FBN-58-165 19.22

10" FC2WG-10 51.99 FC2W-ER-10 45.61 FC2W-CS-10-L12 317.18 FBN-58-165 19.2212" FC2WG-12 64.68 FC2W-ER-12 52.33 FC2W-CS-12-L12 393.49 FBN-58-165 19.22

Epoxy coating and NBR (Buna-N) gaskets are standard with FC2W couplings.* SH = Option for FC2W couplings with stainless steel nuts and bolts. Add “-SH” to the catalog number. Example: FC2W-6-L12-SH

N .PS

R(I )

R( )

CN

N B

A .SL

A .W . L .

L PS C .I E

S S BO *-SH

3" 2.50-4.29 63.5-109.0 FC2W-3-L12 3 12" 35 $ 244.44 $ 295.814" 3.96-5.60 100.6-142.2 FC2W-4-L12 4 12" 45 291.76 360.256" 6.23-7.60 158.2-193.0 FC2W-6-L12 4 12" 56 370.09 438.608" 8.40-9.75 213.3-247.6 FC2W-8-L12 4 12" 69 512.61 581.15

10" 10.75-12.12 273.0-307.8 FC2W-10-L12 6 12" 90 599.05 701.8112" 12.75-14.38 323.8-365.25 FC2W-12-L12 6 12" 109 713.10 815.86

FORD “ULTRA-FLEX” WIDE RANGE COUPLINGS WITH12" LONG CENTER SLEEVES-STYLE FC2W-L12

Page 10: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-10

M

March, 2020Section M

FORD IRON FLANGED COUPLING ADAPTERSSTYLE FFCA

Note: Optional anchor studs are available at $ 46.98 for each stud. For two studs add “-AS2” to the catalog number; for four studs add “-AS4” to the catalog number. This coupling is furnished with tee-head bolts and a built-in O-ring gasket.

End rings and gaskets for FFCA’s are not interchangeable with the balance of the Ford coupling system.

Larger, fabricated steel flanged coupling adapters are detailed in catalog section N.

N .PS

P O.D.R

E RC C

CN

OA S

A .W . L .

LP

3"3.45-3.603.70-3.883.91-4.064.07-4.20

RedBlackBlack

White/Gray

FFCA-360FFCA-388FFCA-406FFCA-420

218181818

$ 193.67

4"4.45-4.604.70-4.914.92-5.165.17-5.32

RedBlackBlack

White/Gray

FFCA-460FFCA-491FFCA-516FFCA-532

222222222

239.23

6"6.54-6.766.81-7.127.17-7.377.37-7.60

RedBlackBlack

White/Gray

FFCA-676FFCA-712FFCA-737FFCA-760

231313131

305.92

8"8.50-8.758.76-9.179.22-9.509.49-9.79

RedBlackBlack

White/Gray

FFCA-875FFCA-917FFCA-950FFCA-979

442424242

419.83

10" 10.69-10.8511.04-11.40

RedBlack

FFCA-1085FFCA-1140 4 55

55 760.82

12" 12.72-12.8413.14-13.56

RedBlack

FFCA-1284FFCA-1356 4 63

63 843.40

Page 11: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-11

M

March, 2020Section M

FORD CUT-IN COUPLINGSSTYLE FRR (15" LONG)

N .PS

P O.D.R

CN

A .W . L .

LP

4" 4.80-5.14 FRR-514 38 $ 428.475.15-5.57 FRR-557 38 428.47

6" 6.90-7.20 FRR-720 61 543.127.21-7.56 FRR-756 61 543.12

8" 9.05-9.40 FRR-940 82 628.609.40-9.74 FRR-974 82 659.14

10"11.10-11.40 FRR-1140 105 907.9511.42-11.77 FRR-1177 105 907.9511.77-12.12 FRR-1212 105 1121.88

12"13.20-13.50 FRR-1350 135 1183.1613.69-14.04 FRR-1404 135 1201.4814.03-14.38 FRR-1438 135 1272.26

SERIES MJFA FLANGE ADAPTER

SERIES MJFA FLANGE ADAPTER WITH FLANGE BOLT

N . P S

P O.D. R C NT-B / N A . W .

L .L

PQ . S3" 3.50-3.96 MJFA-3-I 4 5/8" x 3" 15 $ 135.614" 4.21-4.80 MJFA-4-I 4 3/4" x 4" 18 139.556" 6.27-6.90 MJFA-6-I 6 3/4" x 4" 35 206.488" 8.40-9.05 MJFA-8-I 6 3/4" x 4-1/2" 41 307.6510" 10.50-11.10 MJFA-10-I 8 3/4" x 4-1/2" 56 443.8112" 12.50-13.20 MJFA-12-I 8 3/4" x 4-1/2" 75 557.52

N . P S

P O.D. R

C N

T-B / N F B / N A . W . L . L PQ . S Q . S

3" 3.50-3.96 MJFA-3A-I 4 5/8" 3" 4 5/8" 2-1/2" 18 $ 151.354" 4.21-4.80 MJFA-4A-I 4 3/4" 4" 8 5/8" 2-1/2" 21 152.046" 6.27-6.90 MJFA-6A-I 6 3/4" 4" 8 3/4" 2-3/4" 41 234.478" 8.40-9.05 MJFA-8A-I 6 3/4" 4-1/2" 8 3/4" 2-3/4" 47 333.5210" 10.50-11.10 MJFA-10A-I 8 3/4" 4-1/2" 12 7/8" 3" 68 488.7912" 12.50-13.20 MJFA-12A-I 8 3/4" 4-1/2" 12 7/8" 3-1/2" 88 603.94

Page 12: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-12

M

March, 2020Section M

FORD END CAP FOR ULTRA-FLEX WIDE RANGE COUPLINGS

N .PS

P O.D. R

(I )CN

A .W . L .

LP

E CO

E CW . L .

LP

4" 3.96-5.60 FC2W-4-EC 44 $ 298.94 FECW-4 9 $ 105.396" 6.23-7.60 FC2W-6-EC 57 390.01 FECW-6 13 115.898" 8.40-9.75 FC2W-8-EC 75 478.74 FECW-8 23 155.31

10" 10.77-12.12 FC2W-10-EC 138 893.40 FECW-10 62 444.4712" 12.75-14.38 FC2W-12-EC 178 1104.52 FECW-12 80 593.14

N .PS

P O.D. R CN

SL

L P

E CO

LPI MM

4" 3.96-5.60 100.5-142.2 FC2W-4-L12-EC 12" $ 390.97 FECW-4 $ 105.396" 6.23-7.80 158.2-193.0 FC2W-6-L12-EC 12" 485.98 FECW-6 115.898" 8.40-9.75 213.3-247.6 FC2W-8-L12-EC 12" 667.93 FECW-8 155.31

10" 10.75-12.12 273.0-307.8 FC2W-10-L12-EC 12" 1043.53 FECW-10 444.4712" 12.75-14.38 323.8-365.25 FC2W-12-L12-EC 12" 1318.70 FECW-12 593.14

FORD ULTRA-FLEX LONG SLEEVE WIDE RANGE COUPLINGSStyle FC2W-EC (12" long)

FORD END CAP COUPLINGSSTYLE FEC

Caution: Customer is cautioned to provide proper thrust resistance to prevent movement on pipe.

Note: 2" male iron pipe plugs are not included. Larger fabricated end cap couplings are listed in section “N”. Additional end caps which are not listed above are available upon request. Please specify coupling catalog number on which the end cap will be installed.

N .PS

P O.D.R

CN

A .W . L .

LP

E C O( ) L

PFC1 C FC2A C

4"

4.00 FEC-40021 $ 236.47 FEC1-4 FEC2-4 $ 136.484.50 FEC-450

4.80-5.14 FEC-5145.15-5.57 FEC-557

6"

6.00 FEC-60031 300.17 FEC1-6 FEC2-6 153.626.63 FEC-663

6.90-7.20 FEC-7207.21-7.56 FEC-756

8"

8.00 FEC-80041 362.95 FEC1-8 FEC2-8 174.018.63 FEC-863

9.05-9.40 FEC-9409.40-9.74 FEC-974

10" 11.10-11.40 FEC-1140 55 516.62 FEC1-10 FEC2-10 225.6511.77-12.12 FEC-121212" 13.20-13.50 FEC-1350 66 621.17 FEC1-12 FEC2-12 258.01

Page 13: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-13

M

March, 2020Section M

MECHANICAL JOINT COUPLINGSTYLE MJC

N .P S

PO.D. R

CN

R N A .W . L .

LPQ . S

4" 4.21-4.80 MJC-4-I 4 3/4" 14" 25 $ 173.406" 6.27-6.90 MJC-6-I 6 3/4" 14" 43 258.708" 8.40-9.05 MJC-8-I 6 3/4" 14" 50 275.8810" 10.50-11.10 MJC-10-I 8 3/4" 14" 69 395.8612" 12.50-13.20 MJC-12-I 8 3/4" 14" 76 478.71

Options: SH Standard coated coupling with stainless steel nuts and bolts: Add “-SH” to the catalog number. ESH Epoxy coated coupling with stainless steel nuts and bolts: Add “-ESH” to the catalog number. Example: FC2A-690-720-ESH is an FC2A coupling with epoxy coating and stainless steel nuts and bolts. N Coupling with NBR (Buna-N) gaskets: Add “-N” to the catalog number and add 5% of the standard coupling price to the list price.

Component parts available individually. See catalog section M for details.

Page 14: F C 1-6 9 0-7 2 0 -S H M J F A-6 -I F C 2 W-6 -S H · FORD BOLTED FLEX COUPLINGS Section M Ford Bolted Coupling Numbering System NOTE: See item listings in catalog section to ensure

M-14

M

March, 2020Section M

STAINLESS STEEL INSERT STIFFENERS

INSERT NUMBERING SYSTEM

* When ordering, the pipe inside diameter is required. For example, when ordering for an 8" pipe with an I.D. of 7.305", the part number is INSERT-8-731. Stainless steel insert stiffeners with an OD of 4" or larger will be 7-3/8" in length. Contact factory for sizes larger than 36" or high pressure applications.

N . P S * C N L A . W . L . L P3" INSERT-3-xxx 6"-8" 1.7 $ 129.264" INSERT-4-xxx

7-3/8"

1.0 153.836" INSERT-6-xxx 2.1 107.968" INSERT-8-xxx 2.8 117.79

10" INSERT-10-xxxx 3.5 127.4612" INSERT-12-xxxx 4.1 138.8914" INSERT-14-xxxx 5.7 164.9016" INSERT-16-xxxx 6.5 174.2318" INSERT-18-xxxx 7.4 188.7320" INSERT-20-xxxx 8.2 195.6724" INSERT-24-xxxx 9.6 222.7230" INSERT-30-xxxx 20.4 338.7636" INSERT-36-xxxx 25.0 451.52

INSERT-8-xxxx-QOptional 316 SSNominal Pipe Size

Measured Pipe I.D.