eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the...

32
PRODUCT CATALOGUE

Transcript of eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the...

Page 1: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

PRODUCT CATALOGUE

Page 2: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

TABLE OF CONTENTS

BENDS 8,9

CARTRIDGE AND FILTER BAGS 30

CLAMPS 4,5

FLANGES 5

FLEXIBLE HOSE CLAMP 5

HANGING BRACKET 5

HANGING BRACKET CLEVIS 5

LEVER CLAMP 4

SLIM CLAMP 5

WIDE CLAMP 5

CYCLONES 26

DAMPERS 12, 13

AIR VENT 13

BUTTERFLY DAMPER 13

OVERHEAD DAMPER 13

PNEUMATIC SLIDE DAMPER 12

ROSE END 13

SEALED SLIDE DAMPER 12

SLIDE DAMPER 12

SLIDE DAMPER HOSE TAIL 12

DIVERTER VALVES 30

DUST COLLECTOR 27

E-MISSION CONTROL 23

FANS 25

EZI-ARM FAN 22

PORTABLE VENTILATOR 24

ROOF VENTILATOR 24

FITTINGS 10,11

BRANCH PIECES 10

DOUBLE BRANCH PIECE 11

DUCT ENTRY 11

REDUCING CONES 10

MANIFOLDS 11

SQUARE TO ROUND TRANSITIONS 11

“T” PIECES 10

“Y” PIECES 11

FLEXIBLE DUCTING 16-20

AIRDUCT 350 - FOOD GRADE 17

AIRDUCT 355 17

AUTOMOTIVE EXCHAUST DUCTING 18

CP ARAMID 461 PROTECT 19

CP HiTex 485 18

CP HiTex 486 18

CP HiTex 483 18

CP HYPALON® 450 PROTECT 19

EZIFLEX PUR-M 16

FLEXIBLE HOSE CLAMP 20

HIGH TEMP.W 20

PUR 335 MHF 17

PROTAPE® TPE MEMORY 326 19

METAL FLEXIBLE DUCTING 20

MINEFLEX 20

PVCC 20

TPRD 20

FLOOR SWEEP 29

FUME ARMS 21

INSPECTION DOORS 29

LATHE HOODS KITS 29

PNEUMATIC DUCTING SYSTEM 31

ROTARY VALVES 14- 15

SILENCERS 28

STRAIGHT DUCT 6,7

SUCTION BENCHES 28

TELESCOPIC DUCTS 29

WEATHER COWLS 28

WELD ENDS 29

Dust Extraction Fume Extraction Pneumatic Conveying Mechanical Ventilation

Ezi-Duct has the industry experience and the product range to solve your companies requirements.

Ezi-Duct ducting provides the best air flow of any duct on the market and is the natural choice for dust collection and pneumatic conveying systems as it has a smooth bore tube with pressed 90º bends.

Ezi-Duct Modular DuctingFeatures and Benefits of Ezi-Duct Modular Ducting

Companies can cut costs considerably as Ezi-Duct modular ducting is so simple, quick and easy to install, installation time is cut down considerably.Many of Ezi-Ducts customers do the installation in-house, without the need for outside contractorsDust collection and pneumatic conveying systems can frequently block up so the advantages for using Ezi-Duct Modular ducting products is long term. As Ezi-Duct ducting simply clamps together, the customer can easily pull the system apart for cleaning if a blockage occurs.If a company, relocates premises, changes its machinery or expands, the ductwork can be disassembled and reused again and again in different layouts.Many of Ezi Duct’s product range is available ex-stock for immediate delivery.

Ezi-Duct manufactures its ducting in Australia from Australian steel and supplies a huge range of ducting and ducting clamps in galvanised, stainless steel and mild steel. Ezi-Duct has decades of industry experience and continually trains apprentices to ensure our future

Flexible DuctingThe Ezi-Flex product range is recognised as the highest quality range of flexible ducting on the world market. Manufactured in Germany, Ezi-Flex is constructed from the latest high quality polyurethane composite materials on the latest high tech machinery. The Ezi-Flex product range is also one the largest available in the world.

Other Products supplied by Ezi-Duct includeEZI-ARM fume arms and fansA large range of high quality industrial and commercial fansRotary valves in both cast and fabricated typesDust collectors ,Cyclones and FiltersA large range of filter cartridges and filter bags

Call us today for a Ezi-Duct representative or agent to call for a free quotation.

•••••

When you are buying from Ezi-Duct you are supporting Australian manufacturing and you are keeping Australians employed

Page 3: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

3EZIDUCT PRODUCT CATALOGUE

EZI-DUCT STRIVES TO PROVIDE OUR CUSTOMERS WITH THE BEST

SERVICE AND PRODUCTS AT THE MOST ECONOMICAL PRICES

Ezi-Duct's dedicated and experienced team will ensure you are a satisfied customer

Page 4: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

4 EZIDUCT PRODUCT CATALOGUE

CLAMPS

LEVER CLAMP

Designed for ultra quick installation and removal. Lever has adjustable tension and high quality rubber insert. Also available with adjustable latch.

EZI-DUCT DUCTING CLAMPS MAKE INSTALLING DUCTING EZI

Ezi-Duct manufactures a large range of Ducting Clamps, Flanges, Flexible Hose Clamps and Hangers. They are available in both galvanized and stainless steels.

Diameter ClampSlim

ClampWide Clamp

Lever Clamp

Hanging Bracket

FlangesHose Clamp

30 - - - - - Y

50 - - - - - Y

80 Y - Y Y Y Y

100 Y - Y Y Y Y

120 Available upon request

125 Y - Y Y Y Y

140 Y - Y Y Y Y

150 Y - Y Y Y Y

160 Y - Y Y Y Y

180 Y - Y Y Y Y

200 Y Y Y Y Y Y

220 Available upon request

225 Y Y Y Y Y Y

250 Y Y Y Y Y Y

275 Y Y Y Y Y Y

300 Y Y Y Y Y Y

350 Y Y Y Y Y -

400 - Y Y Y Y Y

450 - Y Y Y Y -

500 - Y Y Y Y -

550 - Y Y Y

600 - Y Y Y

650 - Y Y Y

700 - Y Y Y

750 & Above Available upon request

Page 5: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

5EZIDUCT PRODUCT CATALOGUE

CLAMPS

EZIDUCT PRODUCT CATALOGUE

SLIM CLAMP

Our biggest selling Clamp. Comes in 2 x 1/2 sections with pozi-drive nuts and bolts.

WIDE CLAMP

Ideal for larger diameter ducting. Comes in 1 section with 1 x 8mm bolt.

FLEXIBLE HOSE CLAMP

Our hose clamps are made from high quality stainless steel for strength and ease of installation. They can be pulled down and reused.

FLANGES

We manufacture flat bar and angle, drilled or blank flanges to your specification

HANGING BRACKETS

Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging brackets.

HANGING BRACKETS CLEVIS

Our Hangers are manufactured from a minimum of 3 mm galvanised steel. They come in 2 x 1/2 sections and are supplied with 8mm nuts and bolts. Wall brackets or specials are made on request.

Page 6: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

6 EZIDUCT PRODUCT CATALOGUEEZIDUCT PRODUCT CATALOGUE

STRAIGHT DUCT

Ezi-Duct manufactures a large and varied range of Straight Ducting in galvanised, mild and stainless steel.

We carry ex-stock galvanised steel Straights in lengths of 500mm, 1000mm and 2000mm.

Duct comes delivered with Ezi-Duct ends for quick assembly using Ezi-Duct Clamps.

Ezi-Duct uses AUSTRALIAN STEEL produced by B.H.P.

Diameter 500mm LONG

1000mm LONG

2000mm LONG

80 Y Y N/A

100 Y Y Y

120 Available upon request

125 Y Y Y

140 Y Y Y

150 Y Y Y

160 Y Y Y

180 Y Y Y

200 Y Y Y

220 Available upon request

225 Y Y Y

250 Y Y

275 Y Y Y

300 Y Y Y

350 Y Y Y

400 Y Y Y

450 Y Y Y

500 Y Y *

550 Y Y *

600 Y Y *

650 Available upon request

700 Available upon request

750 & Above Available upon request

EX - STOCK

* available in 1500mm long

Page 7: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

7EZIDUCT PRODUCT CATALOGUE

STRAIGHT DUCT

Page 8: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

8 EZIDUCT PRODUCT CATALOGUE

BENDS

Ezi-Duct manufactures a large and varied range of bends in galvanised, mild and stainless steels.

We carry ex-stock galvanised bends in angles of 900 60 0, 45

0, 30 0, 15 0, 7.5

0.

To provide the best airflow Ezi-Duct Standard Bends are 1.5 x D1A. C.L.R. of smooth pressed construction from 80mm to 400mm diameter. From 350mm to 450mm are 7 section lobster back construction of 1.5D C.L.R.

Ezi-Duct can manufacture bends in any radius required upon request.

E

X

-

S

T

O

C

K

Diameter 90 0 60 0 450 30 0 15 0 7.5 0

80 Y Y Y Y Y Y

100 Y Y Y Y Y Y

120 Available upon request

125 Y Y Y Y Y Y

140 Y Y Y Y Y Y

150 Y Y Y Y Y Y

160 Y Y Y Y Y Y

180 Y Y Y Y Y Y

200 Y Y Y Y Y Y

220 Available upon request

225 Y Y Y Y Y Y

250 Y Y Y Y Y Y

275 Y Y Y Y Y Y

300 Y Y Y Y Y Y

350 Y Y Y Y Y Y

400 Y Y Y Y Y Y

450 & Above Available upon request

Page 9: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

9

BENDS

EZIDUCT PRODUCT CATALOGUE

Page 10: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

10 EZIDUCT PRODUCT CATALOGUE

FITTINGS

BRANCH PIECES

All Ezi-Duct fittings are designed and manufactured using the latest computer controlled design and cutting equipment. This ensures that all our fittings are extremely accurate and of the highest quality.

Standard Fittings are manufactured from a minimum of 0.8mm galvanised steel supplied from B.H.P.

All Fittings come standard with Ezi-Duct ends for quick assembly using Ezi-Duct Clamps.

On all Branch Pieces, “Y” Pieces and Manifolds the take off angle comes standard @ 30

0 for

optimal airflow.

Ezi-Duct can manufacture fittings in galvanised, mild or stainless steel and in whatever material thickness is required.When ordering a fitting please quote the A, B & C measurements and length (If required)

COMPUTER CONTROLLED DESIGN

BRANCH PIECES

“Y” PIECES

REDUCING CONES

SQUARE TO ROUND

TRANSITIONS

DUCT ENTRIES

MANIFOLDS

“T” PIECES

REDUCING CONE

PLASMA CUTTING

Page 11: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

11

FITTINGS

EZIDUCT PRODUCT CATALOGUE

SQUARE TO ROUND TRANSITIONS

“Y” PIECES

DOUBLE BRANCH PIECE

MANIFOLDS

DUCT ENTRY

Page 12: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

12 EZIDUCT PRODUCT CATALOGUE

DAMPERS

Ezi-Duct manufactures a large range of Dampers to

suit every application.

They are supplied in galvanised, mild or stainless

steel and many are AVAILABLE EX-STOCK.

Dampers can be fitted with pneumatic or electric

actuators for automatic operation.

All Dampers come standard with Ezi-Duct ends for

quick assembly using Ezi-Duct Clamps.

SLIDE DAMPER

A robust Damper with a 2mm blade that cannot be removed

SEALED SLIDE DAMPER

The Sealed Slide Damper hasan industrial nylon seal that provides the damper with a seal when closed.

The same as a Slide Damper but has one end with a spigot for flexible hose.

SLIDE DAMPER HOSE TAIL

PNEUMATIC SLIDE DAMPER

Page 13: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

13

DAMPERS

EZIDUCT PRODUCT CATALOGUE

OVER HEAD DAMPER

This Damper is used in over head lines

that cannot be reached from ground

level.

It is designed to operate on a chain or

cord

BUTTERFLY DAMPER

Designed to control the volume of air

passing through a duct. Comes with a

lockable quadrant.

AIR VENT

Air Vents are used as an “In Line” bleed damper

ROSE END

Used mostly in the milling industry. Rose Ends are

used as a bleed damper

Page 14: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

14 EZIDUCT PRODUCT CATALOGUE

ROTARY VALVES

Ezi-Duct supplies a range of high quality rotary discharge valves for various applications.Valves are supplied with motor and gearbox ready to install and are available ex-stock.

Rotary Valves

Amm

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

Hmm

Jmm

Kmm

R.V.250 250 315 280 150 30 15 350 370 285 300

R.V.500 500 565 530 150 30 15 415 370 285 300

R.V.1000 1000 1065 1030 150 30 15 415 370 285 300

R.V.W5000 500 580 5030 4x135 40 20 525 580 500 600

Page 15: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

15EZIDUCT PRODUCT CATALOGUE

CAST ROTARY VALVES

DescriptionThe Ezi-Duct cast iron rotary valve has internally machined surfaces that permit free movement of the impeller whilst maintaining an airtight seal.

Operating PrincipleProduct is fed through the square inlet opening and is moved through an airlock by a rotating impeller, and discharged on the opposite side.

ConstructionCast iron, with machined internal surface.

Model

Volume per

round (L/

round)

Motor power (kW)

Valve speed (rpm)

Working temp (oC)

Dimensions (mm)

A B C A1 B1 C1 H E Flange hole diammeter

RV2 2 0.55 24 <300 240 200 150 240 x 240 200 150 x 150 240 ~680 9

RV4 4 0.55 24 <300 280 240 180 280 x 280 230 180 x 180 280 720 11

RV6 6 0.75 24 <300 300 260 200 300 x 300 250 200 x 200 300 ~740 11

RV8 8 0.75 24 <300 320 280 220 320 x 320 270 220 x 220 320 ~760 11

RV10 10 1.1 24 <300 340 300 240 340 x 340 290 240 x 240 340 ~800 11

RV12 12 1.1 24 <300 360 320 260 360 x 360 310 260 x 260 360 ~820 13

RV14 14 1.1 24 <300 381 340 280 380 x 380 330 280 x 280 380 ~1020 13

RV16 16 1.1 24 <300 400 360 300 400 x 400 350 300 x 300 400 ~1040 17

RV18 18 1.1 24 <300 420 380 320 420 x 420 370 320 x 320 420 ~1080 17

RV20 20 1.1 24 <300 440 400 340 440 x 440 390 340 x 340 440 ~1100 17

RV26 26 2.2 24 <300 500 460 400 500 x 500 450 400 x 400 520 ~1200 17

RV30 30 2.2 24 <300 540 500 440 540 x 540 490 440 x 440 560 ~1240 17

RV36 36 3 24 <300 640 590 500 640 x 640 590 500 x 500 680 ~1280 20

RV40 40 4 24 <300 680 630 540 680 x 680 630 540 x 540 720 ~1380 20

RV46 46 4 24 <300 820 740 600 820 x 820 740 600 x 600 840 ~1600 22

RV56 56 5.5 24 <300 940 840 700 940 x 940 840 700 x 700 1000 ~1850 22

RV66 66 7.5 24 <300 1060 940 800 1060 x 1060 940 800 x 800 1200 ~2100 22

Page 16: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

16 EZIDUCT PRODUCT CATALOGUE

FLEXIBLE DUCTING

FEATURESmedium-heavy modelhigh axial compressibilityabrasion proof

•••

PROPERTIEShigh axial compressibility (3:1)abrasion prooflightvery flexiblekink-proofvery good flexibility at low tempgood resistance to oil and fuel vapoursgood resistance to chemicalsgas and liquid tightelectrostatic discharge by grounding the spiral (according to ZH 1/200))

TEMPERATURE RANGEapprox. –40°C to approx. +90°Cfor short periods up to +125°C

•••••••

•••

••

CONSTRUCTIONsteel wire spiral integrated in hose wall

extruded tape

wall thickness approx. 0,6 mm

MATERIALwall: pure polyurethanespiral: steel wire

APPLICATIONSSuction and blast hose especially suitable

for light abrasive solids such as dust, powder, fibres and chipsfor gaseous media such as oil vapours and welding smoke

1.

2.

3.

••

EZIFLEX PUR-M (MEDIUM)

I.D. Recommended Operating Limits Bending Radius Weight Stock Length Order No. Possitive Pressure Negative Pressure (middle of hose) mm bar bar mm kg/m m

EZIFLEX PUR-M (MEDIUM)40 0,615 0,234 56 0,37 10 PUR-M- 40 52 0,615 0,234 56 0,37 10 PUR-M- 52 63 0,515 0,189 66 0,44 10 PUR-M- 6376 0,410 0,126 81 0,53 10 PUR-M- 76 82 0,385 0,117 85 0,57 10 PUR-M- 82 90 0,310 0,081 105 0,66 10 PUR-M- 90 102 0,310 0,081 105 0,66 10 PUR-M- 102115 0,270 0,070 119 0,76 10 PUR-M- 115120 0,260 0,068 124 0,79 10 PUR-M- 120127 0,250 0,054 129 0,81 10 PUR-M- 127140 0,220 0,054 144 0,92 10 PUR-M- 140152 0,205 0,054 153 0,98 10 PUR-M- 152160 0,195 0,047 163 1,02 10 PUR-M- 160180 0,175 0,036 182 1,17 10 PUR-M- 180203 0,155 0,036 202 1,30 10 PUR-M- 203229 0,140 0,025 226 1,47 10 PUR-M- 229254 0,125 0,014 250 1,62 10 PUR-M- 254279 0,105 0,013 300 2,10 10 PUR-M- 279305 0,105 0,013 300 2,10 10 PUR-M- 305356 0,090 0,090 348 2,53 10 PUR-M- 356406 0,080 0,007 397 2,88 10 PUR-M- 406

Page 17: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

17EZIDUCT PRODUCT CATALOGUE

FLEXIBLE DUCTING

FEAURES: Highly abrasion-proofSmooth interiorIncreased pressure and vacuum efficiency

CONSTRUCTION:Spring wire firmly embedded in wallProfile with optimized flow properties

Wall thickness 1.5 mm approx.

MATERIAL:Wall: Special premium esterpolyurethaneSpiral: Spring Steel Wire

•••

1.2.

3.

AIRDUCT 355APPLICATIONS: Universal abrasion-proof suction and transport hose, especially suitable:

for high flow-rates of abrasive solids such as powder, chips and granulesfor gaseous and liquid mediafor industrial vacuum cleaners, granulated conveying systems, printing machines, blowers and commpressorsas robust protection hose

TEMPERATURE RANGE40°C approx. to + 90°C approx.short time to +125°C approx.

••

••

FEAURES: Highly abrasion-proofSmooth interiorIncreased pressure and vacuum efficiencyfood grade approved

CONSTRUCTION:Spring steel wire firmly embedded in wallProfile with optimized flow propertiesWall thickness 0.7 mm approx.

MATERIAL:Wall: Special premium etherpolyurethane Spiral: Spring Steel Wire

•••

1.

2.3.

AIRDUCT 350APPLICATIONS: Abrasion-proof suction and blast hose, especially suitable:

for abrasive solids such as dust, powder, fibres, chips and granulatesfor gaseous and liquid mediafor public utility street cleaning vehiclesfor lawnmowers, grass sweeping machines and leaves exhaustfor feed transport

TEMPERATURE RANGE-40°C approx. to + 90°C approx.short time to +125°C approx.

••

••

FOOD GRADE FLEX DUCTING

GENERAL PROPERTIESExtrude TapeWall Thickness 1.0 mm

USP: Pre-PUR® is highly abrasion proof (abrasionresistance about 2.5 to 5 times better than mostrubber materials and about 3 to 4 times better thanmost soft PVC´s)long service lifeless downtimePUR hoses are more flexible and have less weightthan rubber hosesFar better in price than silicon hosesTransparentprocess can be monitoredVibration resistant welding seamSmooth interior

••

•••••••••••••

Special Hose PUR 335 MHF

Page 18: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

18 EZIDUCT PRODUCT CATALOGUE

FLEXIBLE DUCTING

AUTOMOTIVE EXHAUST & HIGH TEMP. FLEX DUCTING

GENERAL PROPERTIES• Patented CP construction• Multi layer• insulated• Exhaust gas temperature to +500° C

USP: Patented CP construction

suitable for light overpressurePatented multi-layer construction

allows extremely high temperaturedifference between inside and outside of the hoselonger service life

•>

•>>>

CP HiTex 485

GENERAL PROPERTIESPatented CP constructionMulti layerinsulatedExhaust gas temperature to +650 °C (short time +700 °C)

USP: Patented CP construction

suitable for light overpressurePatented multi-layer construction

allows extremely high temperaturedifference between inside and outside of the hoselonger service life

••••

•>

•>>>

CP HiTex 486

GENERAL PROPERTIESPatented CP constructionMulti layerinsulatedExhaust gas temperature to +900 °C (short time +1.100 °C)

USP: Patented CP constructionPatented multi-layer construction

allows extremely high temperaturedifference between inside and outsideof the hoselonger service life

••••

••

>>>>

CP HiTex 483

Page 19: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

19EZIDUCT PRODUCT CATALOGUE

FLEXIBLE DUCTING

GENERAL PROPERTIESFully crush-proofExterior foldsExhaust gas temperature to +200° C

USP: Flow-optimised outer convolution ensures an extremely high delivery rate (+5% inside diameter when bended has an effect of +10% on / crosssectional area):

low pressure lossreduction of blower power requirementslower operating costslower temperature inside the hoselonger service life

Fully crush proof (instead of hoses with PP spiral)Reduction of weight (compared with rubber hoses or TPE hoses with PP spiral)Small bending radiusExterior abrasion protection (also coloured)

•••

>>>>>

••

••

PROTAPE® TPE MEMORY 326

GENERAL PROPERTIESPatented CP constructionExhaust gas temperature to +200° C

USP: Patented CP constructionExterior abrasion protection (also coloured) to avoid paint damageCP Protect one clamp-cover and two end-caps includedExterior abraison protection (also coloured) to avoid paint damageAirtight coating (superior to competition) high delivery rateless risk of unhealthy gas leakageVibration resistant longer service life

••

•••••••

CP HYPALON® 450 PROTECT

GENERAL PROPERTIES• Patented CP construction• Exhaust gas temperature to +300° C

USP: Patented CP constructionExterior abrasion protection (also coloured) to avoid paint damageCP Protect one clamp-cover and two end-caps includedExterior abraison protection (also coloured) to avoid paint damageAirtight coating (superior to competition) high delivery rate

less risk of unhealthy gas leakageVibration resistant

longer service life

•••••

>•

>

CP ARAMID 461 PROTECT

Page 20: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

20 EZIDUCT PRODUCT CATALOGUE

FLEXIBLE DUCTING

TPRDTPRD is an ideal product for higher temperature dust and fume extraction applications. It is constructed from thermo plastic rubber material with a spring steel helix. TPRD has good abrasive qualities and is U.V. resistant. TPRD is available in 10 Meter Lengths. Temp. Range –40 °C to 120 °C

PVCC

PVCC is an ideal product for use in light to general dust and fume extraction applications. It is constructed from a tough PVC material with a spring steel helix. Being manufactured from clear PVC, it allows operators to monitor inside the duct work if there is a blockage of material. PVCC is available in 10 Meter Lengths.Temp. Range 0°C To 50 °C

HIGH TEMP. W

High Temp. W is suitable for high temperature working conditions such as foundries. It is constructed from PTFE teflon coated glasscloth crimped by a helically wound steel strip.Temperature Range: 0°C to 225°C

METAL FLEXIBLE DUCTINGMetal Flex is manufactured from

helically wound metal strips. It

is extremely hard wearing and is

suitable for heavy duty dust and

fume extractions and extraction of

hot gases. Temp Range –50°C to

250°C This product is also available

manufactured from 304 2B stainless

steel.

FLEXIBLE HOSE CLAMPOur Hose Clamps are made from

high quality stainless steel for

strength and ease of installation.

They can be pulled down and

reused.

MINEFLEX

Mineflex is constructed with a

yellow polyethylene woven fabric.

As the name “Flex” indicates, this

product has a wire spinal helix

which provides flexibility and avoids

kinking. The joining mechanism is

the skirt

connecting method consisting

of eyelets and a sleeve enabling

connection with Mineflat.

Page 21: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

21EZIDUCT PRODUCT CATALOGUE

FUME ARMS

The Ezi-Duct EZI-ARM is a self supporting suction arm that is the best technical solution for the extraction of fumes & dust. It’s design has no internal obstructions that cause turbulence and snag points. The flexible ducting has been kept to a minimum due to the high friction loss and wear possibilities associated with this product.

The EZI-ARM has a 3000mm reach and is 150mm in diameter. The EZI-ARM can rotate 360 degrees and is designed with an ease of use principle for the operator. This enables an enormous number of suction hood positions.

1

1

2

2

3

6

8

9

9

11

12

13

15

16

18

19

19

20

21

22

22

23

24

25

26

24

26

27

7

5

9

29

30

31

34

39

40

4142

46

47

48

48.1

6162

6064

43

SHEET 1 OF 2

36

6.1

29.1

3231

35 35.1

40.1

63

73

48.2EROL EXPORTS (P)LTD.

DRG # E/367

4

14

33

44

Light & anti-spark screen optional

Page 22: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

22 EZIDUCT PRODUCT CATALOGUE

Ezi-Duct also has a range of industrial quality Centrifugal Fans that complement the EZIARM.

CBS315 3000 mtr3 per hour @ 1500 pa ( for 1 -2 arms)

CBS355 6000 mtr3 per hour @ 1500 pa ( for 3 -4 arms)

CBS400 9000 mtr3 per hour @ 1500 pa ( for 5 -6 arms)

EZI-ARM FAN

Page 23: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

23EZIDUCT PRODUCT CATALOGUE

E-MISSION CONTROL™

DescriptionThe Polex e-MISSION Control™ Mobile Dust Collector has been designed to suit a wide range of applications. These units are ideally suited to continuous operation since the filters are continuously cleaned while in operation.

Operating PrinciplePolluted air enters through one or two inlets in the top casing and is directed through a baffle and then upwards through a set of cartridge filters. The larger dust particles drop out into the dust tray while the lighter and finer particles continue into the cartridge filters. The cleaned air then enters the clean-air chamber where an array of blow-tubes are positioned. Compressed air is ejected through a solenoid valve which travels through the blow tubes and into the cartridge filters. The compressed air causes the dust to fall off the filters and collect in the bin below. The cleaned air is then discharged to atmosphere through an activated carbon filter, or can be connected to discharge ductwork.

FiltersAntistatic Spun Bonded Polyester with PTFE membrane.

Construction & Finish1.2 mm thick folded mild steel construction, Powdercoated inside and outside

ElectricalElectric motor starter with start/stop push buttons, automatic electronic timer for filter cleaning, hour meter and light for changing filters.

• Reverse-Pulse Cleaning• 2.2 kW Fan• Floor And Wall Mounting• Carbon Filter For Odour Removal• Cartridge Filters 20 m2 Total Filter Area• Heavy Duty Rubber Castor Wheels• Provision For 2 Fume Arms• Airflow 1400 m3/h To 3000 m3/h

Page 24: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

24 EZIDUCT PRODUCT CATALOGUE

PORTABLE VENTILATOR & ROOF VENTILATOR

The Ezi-Duct Portable Ventilator is the perfect economical solution for the extraction of fumes, light airborne dust, welding fumes, odours and hot air from workshops, warehouses, tunnels, building sites and confined areas.

It is also ideal for positive ventilation of confined areas, underground pits and tunnels, silos, marquees, ships and boats.

The Ezi-Duct Portable Ventilator comes standard with 5 metres of flexible ductwork and can be supplied with an additional 5 metres of flexible ductwork on request.

All fans have 240 volt, 50 Hz, 2 pole, single phase motors.

Ezi-Duct ROOF VENTILATOR fan seriesThe Ezi-Duct Roof Ventilator fan is the perfect solution for ventilating and cooling down factories and warehouses.

Operating PrincipleAir is moved vertically through an axial fan impeller and discharged uniformly beneath the rain-cap.

ConstructionNon corrosive, lightweight Materials.

Model D Dia H1 C C1 B E H M (d1xL1) kg

3 650 300 60 480 504 510 350 545 M8x250 15

4 650 400 60 600 622 630 350 585 M12x250 20

5 1000 500 60 700 740 750 500 715 M12x300 25

6 1000 600 60 800 858 870 500 765 M12x300 35

Model Max Airflow (m3/h) Fan Speed (rpm) Motor Power (kW)

3 1650 1450 0.37

4 5700 1450 0.55

5 8000 1450 0.55

6-6 11000 960 1.1

6-4 15000 1450 1.5

MODELBLADE SIZEMM

FAN SPEED

RPM

FULL PRESSURE

PA

AIR VOLUMEM3/HOUR

VOLTAGEPOWER

KWWEIGHT

KGSIZEMM

PV200 200 2800 245 1500 240 0.15 9 350X285X340

PV250 250 2800 294 2580 240 0.32 12 345X325X380

PV300 300 2800 343 3600 240 0.52 14 410X375X435

PV400 400 2800 410 5400 240 1.2 24.8 525X490X520

PV450 450 2800 520 7500 240 1.7 27.5 510X510X565

PORTABLE VENTILATOR

ROOF VENTILATOR

Page 25: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

25EZIDUCT PRODUCT CATALOGUE

Ezi-Duct supplies a large range of industrial fans to cover any application. All fans are custom made to the customer’s requirements of airflow and pressure.

Ezi-Duct extensive fan range includes:

Centrifugal in both Clean Air and Material Handling types High pressureChopperDouble inletAxial Flow

Fans are manufactured in painted mild steel finish or can be supplied in stainless steel. All fans can be fitted with EXP motors on request.

••••

FANS

Centrifugal Fan

Stainless Steel Centrifugal Fan Centrifugal Fan

Axial Flow FanHigh Pressure Centrifugal Fan

Page 26: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

26 EZIDUCT PRODUCT CATALOGUE

CYCLONES

Ezi-Duct manufactures a large range of Cyclones. Cyclones are fabricated to customers requirements or Ezi-Duct has several designs that customers are welcome to order.Cyclones are manufactured from galvanised steel or in stainless or mild steel on request.

PLEASE NOTE !Cyclone designs provided by Ezi-Duct Pty Ltd are supplied in good faith as a guide to customers only. Ezi-Duct Pty Ltd does not design or install Dust Collection or Pneumatic Conveying Systems and takes no responsibility for system’s performance excluding manufacturing defects or faulty workmanship.

Cyclone Type C.V

Amm

Bmm

Cmm

Dmm

Emm

Fm3/Hr

Gmm

Hmm

Imm

Jmm

Kmm

Smm

CV400 285 125 250 400 200 1600 1100 1790 1020 710 400 2

CV500 350 160 250 500 200 2500 1200 1790 1020 710 400 2

CV700 445 200 400 700 300 5000 1400 2500 1405 995 419 2

CV1000 560 300 550 1000 400 8000 1700 3725 2050 1500 615 2

CV1300 750 400 700 1300 450 15000 2000 5090 2820 2000 780 3

CV1600 1100 500 800 1600 550 25000 2300 5420 3150 2000 1050 3

CV1800 1500 500 1000 1800 650 35000 2500 6250 3450 2500 1150 3

Page 27: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

27EZIDUCT PRODUCT CATALOGUE

DUST COLLECTOR

Through it’s associated companies,

Ezi-Duct supplies a large range of Dust

Collectors. The range includes:

Reverse Pulse Cartridge Collectors,

Reverse Pulse Bag House Collectors,

Shaker Bag House Collectors,

Shaker Envelope Bag Collectors

Scrubbers

All the Dust Collectors Ezi-Duct supplies

are Australian designed units that

have come from a combined effort of

group of engineers with over 50 years

combined industry experience.

The range of Dust Collectors have been

designed with the customers needs such

as Ease of operation, Efficiency, Energy

Consumption,Size and Appearance of

the unit as paramount.

They offer many unique features and

are the most economical units to

purchase on the market.

Reverse-Pulse Cartridge Collectors

Reverse Pulse Bag House Collectors

Shaker Bag House Collectors

Reverse-Pulse Cartridge Collectors

Shaker Envelope Bag Collectors Reverse Flow Bag Filter Dust Collectors

Reverse Pulse Bag House Collectors

Page 28: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

28 EZIDUCT PRODUCT CATALOGUE

SILENCERS

To reduce noise levels, Ezi-Duct manufactures a large range of duct silencers. They are available in all diameters and come in standard lengths of 500mm, 1000mm and 2000mm Long.Delivered standard with Ezi-Duct Ends for quick installation with Ezi-Duct Clamps. Ezi-Duct also manufactures silencers in stainless steel, heavy gauge material, square or rectangular sizes and acoustic enclosures.

SUCTION BENCH

Suction Benches are an ideal way to reduce airborne dust in sanding and grinding application. Ezi-Duct manufactures a range of Suction Benches in various styles and sizes to suit your application.

DISCHARGE WEATHER COWLS, STACKS & JETCAPSEzi-Duct manufactures a large range of Weather Cowls, Vertical Discharge Stacks and JetCaps. Weather Cowls can be manufactured in stainless steel, heavy gauge material or in square or rectangular configurations.

Jetcap Weather Cowl Flap Type

OTHER PRODUCTS

6 x 1250 mm dia. stacks with Axial

flow fans & weather cowls flap typeVertical Discarge Stacks

Weather Hat

Page 29: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

29EZIDUCT PRODUCT CATALOGUEEZIDUCT PRODUCT CATALOGUE

OTHER PRODUCTS

Floor Sweeps make cleaning your workshop an easy task. Simply lift the door then sweep the dust into the floor sweep.They are available in diameters of 80mm to 200mm. Other styles can be manufactured on request.

INSPECTION DOORSInspection Doors are supplied in kit form for on site installation or can be fitted by us in any section of duct you request.

LATHE HOOD KITS

SPECIALTY HOODSEzi-Duct can manufacture hoods for any application in any size or material required by our customers.

FLOOR SWEEPS

Perfect for wood lathes. Ezi-Duct Lathe Hood Kits are adjustable from side to side, up and down from front to back.The oval shape hood can be turned 90

0 when working

on bowls or can be removed alltogether. They come in 2 standard sizes for long and short bed lathes.

WELD ENDSWeld Ends are 50mm long section of Duct with an Ezi-Duct end one end and a raw edge the other end. They are manufactured from 2mm Steel and are useful for machine connections at the start or end of a ducting run. They are available in all diameters.

TELESCOPIC DUCTS

Telescopic Ducts are adjustable lengths of duct that eliminate the need for cutting when installing your ducting system. They enable you to vary the length of duct from 50mm to 450mm.

Page 30: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

30 EZIDUCT PRODUCT CATALOGUE

OTHER PRODUCTS

Diverter valves are designed to

change the direction of air flow

when conveying materials

pneumatically. They are

available in all diameters in

Branch or “Y” configurations

and the take off angle can be

varied to suit your application.

(Standard is 30 0)

They can be manufactured in

stainless steel, heavy gauge

material, and in square or

rectangular styles. Diverter

valves can be fitted with

pneumatic or electric actuators

for automatic operation.

DIVERTER VALVES

CARTRIDGE AND FILTER BAGS

Spare cartridge-filters and bag-filters are available from Eziduct to suit a large range of dust collectors. They can be supplied in different materials to suit the specific application. Eziduct also supplies valves and other dust collector consumables.

Page 31: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

31EZIDUCT PRODUCT CATALOGUE

PNEUMATIC DUCTING SYSTEM

Pneumatic System Ducting, is made for quick, tight and smooth assembly which ensures high transport capacity and careful transport. Ideal for plastic and grain handling.

The fully-rolled edges gives the system extra strength and very few transport damages.

Bends Weld Ends

Damper

Cyclone HD

Divertor Cyclones

Hopper

Pipe Bracket QR Clamp ReducerSlide

VenturiTelescopic Duct

Straights

Page 32: eziduct 2009 200409 - FerretHANGING BRACKETS Clevis are used when using brooker rod to hang the duct. Wall mounts to suit hanging ... produced by B.H.P. Diameter 500mm LONG 1000mm

EZI-DUCT PTY. LTD.A B N 6 9 0 7 8 5 1 9 9 3 6

HEAD OFFICE343-345 Chisholm Rd,Auburn NSW 2144TEL: 02 9645 2333FAX: 02 9645 5666

VICTORIA36 Attenborough St,Dandenong VIC 3175TEL: 03 9791 8477FAX: 03 9791 8422

F R E E C A L L : 1 8 0 0 6 7 3 8 2 8

QLD, SOUTH AUSTRALIA, WESTERN AUSTRALIA, TASMANIA , NORTHERN TERRITORY

EMAIL: [email protected]: www.eziduct.com.au

Ezi-Duct boasts a fully equipped Sheet Metal and Fabrication Factory. We can offer the following services to our customers

Computer Controlled Plasma CuttingRoll Forming FacilitiesGeneral Sheet Metal FabricationStainless Steel Sheet Metal FabricationGeneral Fabrication and Welding (MIG and TIG)

••••••

OTHER SERVICES