Eye and Head Protection Catalog - DiVal Safety and Head Protection/a… · Uvex Bionic® Shield...

Eye and Head Protection Catalog

DiVal Safety Equipment, Inc. Buffalo Rochester Syracuse Philadelphia Houston www.DiValSafety.com

DiVal is an AuthorizedDistributor of:

Products

YOUR DEPENDABLE SUPPLIER of Safety Products and Much, Much More! 2

Introduction

Order by Phone:800.343.13547am - 5pm EST Monday - Friday.Order by Fax:716.874.468624 Hours a Day. Every Day.Order by Web:www.DiValSafety.com24 Hours a Day. Every Day.

Order by Mail:DiVal Safety Equipment, Inc.1721 Niagara Street, Buffalo, New York 14207

We accept cash, check, charge, or account.PAYMENT OPTIONS

Order by E-Mail:[email protected] Hours a Day. Every Day.

Table of Contents Pages

Safety Glasses............................Bluetooth® Eyewear Kits .....................Goggles ....................................Readers Safety Glasses ......................Welding Eyewear ...............................Eyewear Accessories ..........................Lens Cleaning ................................Faceshields ..........................Headgear ......................Hard Hat Racks ..................................Hard Hat Accessories .............Type I Hard Hats .....................Specialty Hard Hats .....................Bump Caps .........................................Type II Hard Hats ...............................Helmet Liners ................................Knit Caps .............................................

3-12,145

10,12,13111415

15,163, 14,17-20

3, 14,17-18, 2120

21,29,3022-28,30

25-272929

30,3131

MirroredIdeal for outdoor work.

Provides protection againsthigh-glare light conditions.

Espresso/BrownUse outdoors where

sunlight and glare causeeye fatigue and strain.

PolarizedProvides superior glare

control for outdoor workersin bright, sunny conditions.

GrayProtects against sunlightin outdoor applications.

BlueUse in work conditions

with sodium vapor lightingand excessive glare.

AmberGreat for low light

conditions. Providesenhanced contrast.

Copper Blue BlockBlocks glare similar to a grayor mirrored lens, but providesa brighter field of vision tha

other shaded lenses.

Filter Shade3.0 & 5.0

Especially for use aroundwelding, brazing, or cutting

applications. Not for usewhen welding.

Spectrum Control Technology (SCT)

Reduces radiation hazardssuch as ultraviolet (UV),

infrared, or blue light. Greatfor use around welding sites.

Indoor/OutdoorGreat for a variety of

lighting conditions. Perfectfor those who are working

indoors and outdoors.

Aqua PrecisionRed Mirrored

Blocks the transmission ofinfrared light, providing

greater contrast and clarity.

Choosing the Proper Lens TintThis chart is designed to help you put your workers in protective

eyewear that best suits the work environments they are most often in.

ANSI AccreditationThe American National Standards Institute (ANSI)provides accreditation in accordance with ISO/IEC Guide 65 for product certification programs to ensure that themarketplace can gain confidence for their activities. All of our eyewear products comply with the ANSI standard.

CSA CertificatioMany of our safety eyewear products are also certified tothe requirements of the Canadian Standards Association (CSA). CSA certification is indicated in the description ofeach applicable product.

Ballistic Impact ProtectionFor even greater security and protection from theunexpected, many of our safety eyewear products have undergone and passed Military V0 (V-sub zero) ballistic impact testing. This means each of these eyewear styles can withstand impact energies 7X greater than the impact tests required by ANSI and CSA. (Does not apply tospeciality tints and welding shades).

RecommendedFilter Shade

23-43-44-55-655

WorkerOperation

Torch SolderingTorch BrazingLight Cutting up to 1”Medium Cutting 1” to 6”Heavy Cutting more than 6”Gas Welding, light up to 1/8”Gas Welding, medium, 1/8” to 1/2”

Filter Shades

ClearBest for use in normal

indoor lighting conditions.

Item #SF401AF Clear, AF LensItem #SF402AF Gray, AF LensItem #SF410AS I/O Mirror, AS Lens

3Phone 716.874.9060 Toll Free 800.343.1354 Fax 716.874.4686 DiValSafety.com

Safety Glasses & Faceshields

Di-Vision Wrap-Around Safety GlassesDi-Vision sleek wrap-around economical safety glasses. Lightweight, rimless design provides all day user comfort. General purposes for indoor applications that require im-pact protection. The scratch resistant, 100% polycarbonate lens offers 99% protection from harmful UV-A and UV-B rays. Exceeds ANSI Z87.1-2003 high velocity impact standards. 12 pair per box. 144 per case.

Item #A1113CHC Clear LensItem #A1113CHCAF Clear, Anti-Fog LensItem #A1113GHC Gray LensItem #A1113GHCAF Gray, Anti-Fog LensItem #A1113AHC Amber LensItem #A1113IOHC Mirrored Lens

Item #A1112CHC Clear LensItem #A1112GHC Gray LensItem #A1112AHC Amber Lens

Item #A1012UC Safety Glasses Item #A1012UCDISP Dispenser Box

Di-Vision Do-All Safety Glasses, Clear LensDi-Vision clear lens wrap-around style safety glasses can be used as visi-tor spectacles, worn over prescription eyewear, or as an economical safety glass. Brow guard provides additional protection. Z87+ approved. 12 pair per box. 144 pair per case.

Uvex Bionic® Shield with HeadgearDesigned for rugged jobs. Full Shield provides built-in chin protection and extended top-of-head coverage for enhanced protection from airborne debris. 100% dielec-tric. Easy-to-set headgear, perfect for workers exposed to falling or flying objects,impacts, chemical and splash. Faceshield offers secondary protection and must be worn with safety goggles or glasses. Meets ANSI Z87.1-2010 High impact standards.

Headgear & Faceshields Item #S8500 w/ Clr. Lens Item #S8505 w/ Clr. Lens & Hard Hat Adp.Item #S8510 w/ AF Lens Item #S8515 w/ AF Lens & Hard Hat Adp.Replacements Item #S8550REPL Clear Lens Item #S8555 Clear Anti-Fog LensItem #S8560 Shade 3 Lens Item #S8565 Shade 5 Lens Item #S8580 Sweatband

$28.60$37.75

$44.60$39.60

$5.05$17.25$21.75$29.10

$2.05

$2.25$2.80$2.60$3.05$2.60$2.80

$1.80$1.95$1.95

$1.60$19.95

Di-Vision Sport Lens Safety GlassesDi-Vision sport lens, safety glasses. Lightweight, rimless design provides all day user comfort. Flexible rubber tip tem-ples provide a secure fit withoutuncomfortable pressure points. The scratch resistant 100% polycarbonate lens blocks 99.9% harmful UV-rays. Meets or exceeds ANSI Z87.1 stan-dards for high impact require-ments. Sold by the pair. 12 pair per box. 144 pair per case.

SecureFit™ 400 Series Safety Glasses3M™ SecureFit™ 400 series black frame safety glasses. Designed to enhance temple comfort and wearability. Features proprietary self-adjusting 3M™ Pressure Diffusion Temple Technology. Motion-inspired, contoured piping in a bold, modern color palette, for an infusion of style. Dual-injected, pad-ded temple touchprints for added comfort over the ears. Soft, adjustable nosepads for greater personalization.

$5.10

$3.90$4.20

SecureFit™ 200 Series Safety Glasses3M™ SecureFit™ 200 series. Designed to enhance temple comfort and wearability. Features proprietary self-adjusting 3M™ Pressure Diffusion Temple Technology. Molded nosebridge. Anti-fog polycarbonate lenses absorb 99.9% of UVA and UVB rays. Meets ANSI Z78.1-2010 standards. Sold by the pair. 20 pairs per case.

Item #SF201AF Clear, AF Lens, Clear FrameItem #SF201AS Clear, AS Lens, Clear FrameItem #SF202AF Gray, AF Lens, Gray FrameItem #SF202AS Gray, AS Lens, Gray FrameItem #SF203AF Amber, AF Lens, Clear FrameItem #SF203AS Amber, AS Lens, Amber Frame

$2.65$2.95

$3.15

$3.15$2.85

$2.85

Uvex Protege Safety GlassesUvex Protege metallic black frame safety glasses. Propri-etary floating lens design o fers increased flexibility and fitUltra-lightweight design at only 27.5 grams, weighs less than one ounce. Secure wrap-around brow expands to fit awide range of users. Soft temple tip pads provide a secure fit. Soft, clear nose pads prevent slipping. Meets military V0ballistic test for impact. Meets ANSI Z87+ (High Impact) and is certified to CS Z94.3 standards. Lifetime frame guaran-tee. Made in USA. Uvex Protege metallic black frame safety glasses. 10 per box.Item #S4200 Clear LensItem #S4200X Clear Uvextreme LensItem #S4201 Gray LensItem #S4201X Gray Uvextreme LensItem #S4202 SCT Reflect 50 LenItem #S4203 Silver Mirror LensItem #S4205X SCT Gray Lens

Uvex U2 Clear Lens Safety GlassesUvex U2 Black frame with clear lens safety glasses. Hard lens coating and spatulite temple style. Sporty wrap-around design and adjustable temple length. Lifetime frame guaran-tee and economical lens replacement system. Meets military V0 ballistic test for impact. Meets ANSI Z87.1-2010 and is certified to CS Z94.3 standards. Made in USA. Uvex U2 black frame and clear lens safety glasses.Item #S3100 Ultra-Dura HC LensItem #S3100X Uvextreme AF Lens

Seismic® Safety GlassesUvex Seismic® black frame safety glasses. Wraparound, sealed eyewear with soft and flexible nasal pads providingminimum slippage. Soft, high-quality face cushioning and padded temples for all day comfort. Adjustable flameresistant headband. Provides protection against impact, sun, wind, dust and debris. Meets ANSI Z87.1 standards.

Safety Glasses


Uvex Protege®

Bandit™ Uvex U2®Flashback®

SolarPro™ Safety GlassesUVEX™ SolarPro™ safety glasses. Sport inspired wraparound dual lens design provides superior peripheral vision and side protection. Soft, padded temples and nosepiece delivers a comfortable, non slip fit. Ratcheting temples make it easy toadjust lens angle. 100% dielectric. Uvextreme anti-fog. Meets ANSI Z87.1 standards.

Bandit Clear Lens Safety GlassesUVEX Bandit Safety Glasses. Black frame with clear lens. Spatulite temple style, with adjustable length, offers contem-porary styling, sporty wrap-around provides non-slip fit andcomfort. Meets ANSI Z87.1-2010 in addition to the militaries ballistic test for impact. Lifetime frame guarantee and eco-nomical lens replacement system. Made in the USA.Item #S1600 Ultra-Dura HC LensItem #S1600C Uvextreme AF Lens

Flashback Safety GlassesUvex Flashback Safety Glasses. Black frame with clear lens. Classic dual lens look is a single lens design with adjustable Duoflex cushioned temple length and lens inclination withexcellent peripheral protection. Meets ANSI Z87.1-2010 and is Certified to CS Z94.3 Standards. Lifetime frame guaran-tee and economical lens replacement system. Made in the USA. 10 per box. 20 boxes per case.Item #S4000 Ultra-Dura HC LensItem #S4000C Uvextreme AF Lens

SolarPro™ Seismic®

$7.75

$9.05$9.05

$28.30

$6.75$6.35

$7.95

$13.50

$14.90$14.50

$6.40$5.90

$5.95$5.70

$5.15

$5.90

$6.50$5.25$4.70

$6.90

$4.65

Item #S0600 Anti-Scratch, Clear LensItem #S0600X Anti-Fog, Clear LensItem #S0601X Anti-Fog, Espresso LensItem #S0602X Anti-Fog, Amber LensItem #S0604X Anti-Fog, SCT Refl. 5Item #S0605X Anti-Scratch, SCT Refl. 5

Item # Lens FrameSX0400X Clear Gray/YellowSX0401X Gray Gray/YellowSX0403 Silver Mirror Gray/BlueSX0404 Blue Mirror Gray/BlueSX0405 Gray Polar Gray/RedSX0406 Gray Photo Gray/Red $26.30

$14.90

$16.85$15.90

Uvex Astrospec Safety GlassesUvex Astrospec safety glasses. Lightweight unilens offers panoramic vision. Lifetime frame guarantee and economical lens replacement system. Adjustable lens inclination and temple length. Custom imprinting available. Meets military ballistic test for impact and ANSI Z87.1-2010. Certified toCSA Z94.3 standards. Made in the USA.Item # Frame Lens Coating TempleS1169 Patriot Clear Ultra-dura DuofleS1169C Patriot Clear Anti-Fog DuofleS1179C Patriot Gray Anti-Fog DuofleS1159 Patriot Amber Ultra-dura DuofleS129 Blue Clear Ultra-dura Std.S129C Blue Clear Anti-Fog Std.S1299 Blue Clear Ultra-dura DuofleS1299C Blue Clear Anti-Fog DuofleS130 Blue Gray Ultra-dura Std.S130C Blue Gray Anti-Fog Std.S135 Black Clear Ultra-dura Std.S135C Black Clear Anti-Fog Std.S1359 Black Clear Ultra-dura DuofleS1359C Black Clear Anti-Fog DuofleS136 Black Gray Ultra-dura Std.S136C Black Gray Anti-Fog Std.S137 Black Mirror Ultra-dura Std.S1379 Black Mirror Ultra-dura Duofle

Astrospec OTG Safety GlassesUVEX Astrospec Over-The-Glass safety glasses. Duoflextemple style that is an economical alternative to expensive Rx eyewear. Meets ANSI Z87.1-2010 and is certified to CS Z94.3 standards. Lifetime frame guarantee and economical lens replacement system. Made in the USA.Item # Frame Lens CoatingS2500 Black Clear Ultra-duraS2500C Black Clear Anti-FogS2501 Black Amber Anti-FogS2504 Black Gray Ultra-duraS2504C Black Gray Ultra-duraS2505 Black SCT Low IR Anti-FogS2510 Blue Clear Ultra-duraS2510C Blue Clear Anti-FogS2514 Blue Gray Ultra-duraS2530 Patriot Gray Anti-FogS2534 Patriot Clear Ultra-duraS2534C Patriot Clear Anti-Fog

Bayonet™ Uvextreme Lens Safety GlassesUvex Bayonet Uvextreme lens black frame safety glasses. These glasses offer substantial coverage, along with excel-lent impact protection and performance. The sport inspired floating lens design combined with a flexible wrap arounbrowbar provides a comfortable fit for a wide variety ofwearers. The soft inserts and nosepiece minimizes slippage and the high performance Uvextreme coating provides long lasting anti-fog performance. Meets and or exceeds ANSI-Z87.1-2010 and CSA Z94.3 standards. 10 per box.Item #S0500X Clear LensItem #S0501X Gray LensItem #S0502X Amber LensItem #S0505X SCT-Gray LensItem #S0509X SCT-Low IR Lens

Bayonet™ Supra Dura Lens Safety GlassesUvex Bayonet Supra Dura lens safety glasses. These glasses offer substantial coverage, along with excellent impact protec-tion and performance. The sport inspired floating lens designcombined with a flexible wrap around browbar provides acomfortable fit for a wide variety of wearers. The soft inserts and nosepiece minimizes slippage and the high performance Supra-Dura coating provides scratch resistance. Meets and or exceeds ANSI-Z87.1-2010 and CSA Z94.3 standards. Bayonet black frame safety glasses. 10 per box.Item #S0500 Clear LensItem #S0501 Gray LensItem #S0502 Amber LensItem #S0503 Silver MirrorItem #S0504 SCT Reflect 5

Safety Glasses & Eyewear Kits


#S1299C

#S2500

#S0505X

#S0504

Item #

AcoustiMaxx™ Stereo Bluetooth® Eyewear KitUvex AcoustiMaxx Stereo Bluetooth® eyewear kit. Designed for use in in-dustrial work environments. Delivers maximum impact protection along with crystal clear, acoustically-isolated in-ear voice communication through its dual microphone technology. Workers can focus on the task at hand while remaining protected and in contact with their team which can help keep them be safer and more productive on the job. AcoustiMaxx stereo bluetooth eyewear kit. Meets ANSI Z87.1-2010 standard.

S0550X $124.99

$7.50

$8.65

$9.75$7.75

$10.75$7.75

$7.75

$10.75$9.75$9.75

$10.75

$8.65

$7.75

$7.90

$7.90$8.90

$7.90

$6.65$7.90$6.65

$7.90

$7.30

$7.70$7.90$4.00

$7.90

$6.65

$8.90

$8.90$7.90

$11.25

$11.25$11.25$11.25

$10.30

$10.40

$12.10$12.10$10.40

$9.30

Genesis® Safety GlassesUvex Genesis® Safety glasses. Wrap around dual lens style for uncompromised peripheral vision and superior coverage. Soft elastomer browguard diffuses and deflects impact while providing comfort.Soft, flexible nose piece easily conformsto reduce slippage. Polycarbonate anti-scratch Uvextreme coating. Meets ANSI Z87.1 standards. 10 per box.

#S3200

Item # Lens HeadbandS1650D Clear NeopreneS1650DF Clear FabricS1651D Gray NeopreneS1651DF Gray Fabric

Item #S4120D Clear Lens Item #S4121D Grey LensItem #S4122D Amber LensItem #S4130D Clear Lens (Slim)Item #S4131D Grey Lens (Slim)Item #S4132D Amber Lens (Slim)

Safety Glasses

Uvex Pheos™ Safety GlassesUvex Pheos black frame safety glasses. Duo-spher-ical lens with integral brow guard provides superior op-tics and enhanced coverage and protection. Lightweight, frameless design with mold-ed-in nose piece and anti-slip temples for a comfortable and secure fit. Temple design provides increased airflowto further resist lens fogging. Meets ANSI Z87.1-2010 standards. 10 per box.

#S3243

Item # Lens Coating TempleS025 Clear Anti-Fog AdjustableS0390 Clear Anti-Scratch Non-AdjustS030 Clear Anti-Fog Non-AdjustS0280X Gray Anti-Fog AdjustableS0391 Gray Anti-Scratch Non-Adjust

Ultra-Spec® 2000 Safety GlassesUVEX™ Ultra-Spec® 2000 safety glasses. Lightweight, wraparound dual lens design with side-shield coverage for excellent protection and peripheral vision. Molded in nose bridge with adjustable temple length. Expanded performance and comfort features for longer wear.

#S025

#S0391

Ultra-Spec® 2001 OTG Safety GlassesUvex Ultra-Spec 2001 OTG safety glasses. Lightweight over-the-glass unilens design fits over most Rx eyewea . Adjustable Duoflex cushionedtemples. Meets ANSI Z87.1-2010 and is certified to CS Z94.3 standards. Made in USA.Item #S010 Clear LensItem #S010C Clear AF LensItem #S0113 Gray LensItem #S0113C Gray AF Lens

Item # Frame LensS3200D Black Clear AF S3200X Black Clear XTR S3201 Black Espresso S3201X Black Espresso XTR S3202X Black Amber S3204 Black SCT-Reflect 50 US3205X Black Gray S3206 Black Shade 2 S3207 Black Shade 3 S3208 Black Shade 5 S3209 Black SCT-Low IRS3210X Black SCT-Verm. XTRS3211X Black SCT-Blue XTRS3212X Black Dark Gray XTRS3213X Black 50% Gray

Item # Frame LensS3220 Earth Clear S3220X Earth Clear XTR S3221 Earth Espresso S3222 Earth Amber S3240 Blue Clear S3240X Blue Clear XTR S3241 Blue Espresso S3241X Blue Espresso XTRS3242 Blue Amber S3243 Blue Gold Mirror UDS3260 R/W/B Clear S3260X R/W/B Clear ExtremeS3263 R/W/B Mirror

Uvex Carbonvision™ Safety Goggles

#S1651DF


$4.15$3.45$3.10$3.75

$3.45

$7.25

$10.90$10.90

$4.90$5.15$5.65

$4.40

$9.25$9.40$8.50

$8.50

$9.25$9.40

$19.50$16.50$19.50

$16.50

$9.10

$8.50$8.50$8.50

$7.75

$9.45

$7.75$8.50$7.75

$8.90

$10.90

$9.75

$7.75$8.25

$8.90

$7.25$10.50

$7.75

$7.75

$7.75

$7.75$7.75$7.25

$7.75

$7.75

Uvex Carbonvision black/gray frame safety goggles. Low profile compact design with a flexible sof frame that adapts perfectly to the face to ensure a perfect fit an seal around the eyes for high performance protection and all day comfort. Meets ANSI Z87.1-2010 and CSA Z94.3 standards.

#S3221

Item #19804 Clear LensItem #19805 Anti-Fog Clear LensItem #19806 Gray LensItem #19807 Indoor/Outdoor LensItem #19809 Amber LensItem #119808 Blue Mirror Lens

Smith & Wesson® Magnum® 3G Safety GlassesSmith & Wesson® Magnum® 3G clear lens, black frame safety glasses. Wraparound single lens design offering superior coverage and pro-tection. Self adjusting ergo-nomic rubber nose pad with rubber fingers. The built in hinge stops help to eliminate scratches. Ergonomically dimensioned three point fit for ultimate comfort. 99% protectio from UV rays. Meets ANSI Z87.1+ standards. 12 per box.Item #SW152PCCI Clear LensItem #SW152PCMI Gold Mirror LensItem #SW152PCSI Smoke LensItem #SW152PCYI Yellow LensItem #SW152PCCBI Copper Blue BlockItem #SW152KIDS Clear Lens (Small)Item #SW152KIDSSM Smoke Lens (Small)

Uvex Millennia™ Safety GlassesUvex Millennia black frame safety glasses feature Millennia high style and full coverage. Light-weight frame with superior side and brow protection. High impact dual 9-base wrap-around unilens. Comfortable universal nose bridge. Available in scratch resis-tant coating or Fog-Ban anti-fog coating. Includes adjustable break-away Flexi-Cord for added security and convenience. Meets ANSI Z87.1-2010 and CSA Z94.3 safety standards.Item #11150350 Clear LensItem #11150351 Gray Lens

Safety Glasses


#SW152PCCI

Uvex Ignite Safety Glasses with HardcoatUVEX Ignite Safety Glasses. Metallic Red/Silver frame with hard coated lens. Lightweight frameless design offers unobstructed vision in a sleek, sporty, wrap-around style that has close-to-the-face protection and superior cover-age. Saddle pad nosepiece reduces slippage and provides a personalized fit with soft temple tip pads that ensure afit that is both comfortable and secure. Meets ANSI Z87.1-2010 and is Certified to CS Z94.3 Standards.Item #S4410 Clear LensItem #S4411 Gray LensItem #S4412 SCT-Reflect 50 LenItem #S4413 Silver Mirror LensItem #S4411X Gray Lens with Uvextreme AF CoatingUvex Ignite™ Safety GlassesUvex Ignite Safety Glasses. Lightweight frameless design offers unobstructed vision in a sleek, sporty, wrap-around style that has close-to-the-face protection and superior coverage. Saddle pad nosepiece reduces slippage and provides a personalized fit with soft temple tip pads thatensure a fit that is both comfortable and secure. MeetsANSI Z87.1-2010 and is Certified to CS Z94.3 Standards.Item #S4400 Clear LensItem #S4400X Clear Extreme LensItem #S4402 Reflect 50 Len

#S4400

#S4411

A200 Series Clear Lens Safety GlassesNorth A200 Series clear lens, black frame safety glasses. Conventional style single lens design with excellent protec-tion and peripheral vision. Durable frame with integrated side protection and adjustable temple lengths. Scratch resis-tant lens coating. Meets ANSI Z87.1-2010 and CSA Z94.3 standards. Clear lens. 10 per box.

S2910 $3.35Item #

#19804

Jackson Safety™ Nemesis™ safety glasses are sleek and sporty with a light-weight design with soft touch temples for added comfort. Single lens wrap-around protection. Every pair includes a neck cord. 99.9% UV protection. Meets ANSI Z87.1+ Standards. Black frame. 12 per box.

$4.90$5.75

$7.25

$10.60

$7.25$10.20

$6.99

$7.25

$6.99

$5.25

$5.25$5.55$4.99

$5.25

$6.90

$7.20

$7.40$6.65$6.20

$7.25

$7.40$6.40$6.20

Jackson Safety™ V30 Nemesis™ Safety Glasses

V50* Epic* AF Lens Safety GlassesJackson Safety* V50* Epic* anti-fog lens, black and red frame safety glasses. Light-weight design with soft, flexible non-slip temples.Interchangeable head strap, temple bars with easy click system. Soft nosepiece for added comfort, padded liner provides complete seal to protect from dust and debris. Top and bottom direct ventilation combined with VISICLEAR 2® anti-fog coating provides exceptional anti-fogging protection. Meets ANSI Z87.1 standards. Anti-fog lens safety glasses. Sold by the pair.Item #33345 Clear Anti-Fog LensItem #35327 Smoke Anti-Fog LensItem #33347 Indoor/Outdoor Anti-Fog Lens

$13.50$13.50

$12.75

#BK112AF

Item # Size Temple Lens4680 Reg Clear Clear 4679 Reg Clear Clear Anti-Fog460M Reg Clear I/O Mirror 4683 Reg Gray Gray 461M Reg Gray Red Mirror 468M Reg Gray Silver Mirror466M Reg Brown Mocha Mirror 4676 Reg Blue Pacific Blu 360M Small Clear I/O Mirror 368M Small Gray Silver Mirror 3680SM Small Clear Clear 3683 Small Gray Gray 369M Small Gray Blue Mirror

StarLite Safety GlassesGateway StarLite safety glasses are incredibly light, with all-around impact protec-tion. Popular design resem-bles sunglasses; men and women love the style, helping to ensure worker compliance.

Pyramex™ ZTek® Safety GlassesPyramex™ ZTek® safety glasses. Eco-nomical wraparound single lens design with full panoramic view. Soft non slip rubber temple tips provide non binding fit. 100 polycarbonate scratch resistant lenses. Provides 99% protection from harmful UV-A and UV-B rays. Exceeds ANSI Z87.1 high impact standards. 12 per box.

Citation Safety GlassesUS Safety Citation safety glasses features twin spherical lenses integrated in a single lens design for men and women, molded in nose piece, ratchet/adjustable temples. Impact resistant polycarbonate lens provides 99.9% UV protection and scratch resistant coating. Item #CS932CLR Clear LensItem #CS932AMB Amber LensItem #CS932GRY Gray Lens

Safety Glasses


$2.45

$2.15

$2.05$2.45

$2.65$2.65

$2.65

$2.25

$2.15

$2.05$2.45

$2.45$2.75

$2.45$2.45$2.45$2.45$2.20

$2.85$3.05$3.05

ForceFlex® Safety GlassesMCR Crews ForceFlex® safety glasses. Engineered to provide the highest level of innovation. Patented multi injection molding of the lens with flexible Thermo Plastic Urethane (TPU) frame. TPU mate-rial allows frame to flex and fit a variety of facial sizesItem #FF120 Black Frame, Clear LensItem #FF122 Black Frame, Gray LensItem #FF132 Orange Frame, Gray LensItem #FF222 Brown Frame, Gray LensItem #FF232 Yellow Frame, Gray Lens

$10.60$11.75$11.75$11.75$11.75

Gateway Flight Safety GlassesGateway Safety® Flight™ safety glasses. Flight™ safety eyewear soars into a new territory of comfort, with an uncon-ventional, patent-pending temple design that will change the face of traditional safety eyewear. Item #35BK83 Black Frame, Gray LensItem #35BK8M Black Frame, Silver Mir. LensItem #35BK9M Black Frame, Blue Mir. LensItem #35GY0M Gray Frame, I/O Mirror LensItem #35GY75 Gray Frame, Amber LensItem #35GY79 Gray Frame, Clear AF LensItem #35GY80 Gray Frame, Clear Lens

$4.75$4.95$4.95$4.95$4.75$5.15$4.25

Checklite Safety GlassesMCR Checklite are the stylish new safety glasses with strong, lightweight polycarbonate lens, a flexible spatula templ design for a comfortable fit du -ing long use and a universal nose piece. Features Duramass scratch-resistant and Duramass anti-fog lens coating. Filters 99% of UV radiation. Meets or exceeds ANSI Z87+ standards.Item #CL110 Clear Scratch Res. Lens Item #CL110AF Clear Anti Fog LensItem #CL112 Gray Scratch Res. Lens

Crews Bearkat® Safety GlassesMCR Crews Bearkat® safety glass-es. Single lens wrap around design with integral side shields for unob-structed view. Comfort is enhanced by the flexible temples and non slip, soft templ sleeves notched for a clip-on breakaway cord. Item #BK110 Clear LensItem #BK110AF Clear Anti Fog LensItem #BK112 Gray LensItem #BK112AF Gray Anti Fog Lens

$2.55$2.25

$2.35$2.65

$1.95$2.40$2.20

#CL110

Item #S2510S Clear Frame, Clear Lens Item #S2510ST Clear Frame, Clear AF LensItem #S2520S Gray Frame, Gray LensItem #S2520ST Gray Frame, Gray AF Lens Item #S2560S Clear Frame, Blue Lens

V50* Epic* AF Lens Safety GlassesJackson Safety* V50* Epic* anti-fog lens, black and red frame safety glasses. Lightweight design with soft, flexible non-slip temples. Interchangeabl head strap, temple bars with easy click system. Soft nosepiece for added comfort, padded liner provides complete seal to protect from dust and debris. Top and bottom direct ventilation combined with VISICLEAR 2® anti-fog coating provides exceptional anti-fogging protection. Meets ANSI Z87.1 standards. Anti-fog lens safety glasses. Sold by the pair.Item #33345 Clear Anti-Fog LensItem #35327 Smoke Anti-Fog LensItem #33347 Indoor/Outdoor Anti-Fog Lens

$13.50$13.50

$12.75

Venture II Lens Safety GlassesPyramex Venture II black frame safety glasses. Nose buds secure the glass and prevent slipping while provid-ing a pillow soft fit. Lenses arecoated for superior scratch resis-tance. And provide 99% protection against harmful UV rays. Exceeds ANSI Z87.1 - 2003 High Impact requirements. Exceeds CSA Z94.3 standards.

Dewalt Protector Safety GlassesDewalt Protector clear lens safety glasses. The Dewalt Protector safety glass has rubber tipped temples that provide a secure, comfortable, fit. The distortion free lens provides fatigue free use. It’s sleek design allows for a perfect fit for both men and women, e -suring worker compliance. These glasses weigh less than one ounce to provide all day comfort. The Protectors safety glass also features a tough, polycarbonate lens, which is impact resistant and provides 99.9% UV protection. Meets or exceeds Z87.1+ standards.Item #DPG541D Clear LensItem #DPG5411D Clear AF LensItem #DPG542D Gray Lens

Dewalt® Framework™ Safety GlassesRadians® Dewalt® Framework™ safety glasses. Features a Foam Shield™ lining to provide a comfortable, snug fit with the added dus and debris protection of a goggle. Double Duty™ temples and adjustable elastic head strap are interchangeable with easy snap on, off. Tough hard coat polycarbonate lens provides great impact and scratch resistance. Anti-fog lens protects against 99% harmful UV rays. Meets ANSI Z87.1 standards. Sold by the pair. 12 pair per box.Item #DPG951 Clear LensItem #DPG952 Smoke LensItem #DPG959 I/O Lens

Item #99910 Blk Frame, Clear LensItem #SB410ST Blk Frame, Clear AF LensItem #SR410S Red Frame, Clear LensItem #SNWR410S R/W/B Frame, Clear Lens

Item #05258014 Clear LensItem #05258214 Gray LensItem #05258412 Light Mirror LensItem #05258512 Light Blue Lens

Veratti 1000 Safety GlassesEncon® Veratti® 1000 safety glasses. These glasses are your economic solution for eye protection. The high impact 10 base curvature lens provides greater peripheral vision and clarity. The all polycarbonate construction and full wrap around coverage makes this glass both lightweight and secure for all day wear. The vented sideshields and comfortable frame gives you the pro-tection you need and want for any job. ANSI Z87.1 approved.

Safety Glasses


Pyramex™ Integra® Safety GlassesPyramex™ Integra® safety glasses. Single lens and adjustable temples to ensure reliable performance and comfortable fit. 100% pol -carbonate scratch resistant lenses. 99% protection from harmful UV-A and UV-B rays. Replacement lens included with each pair. Exceeds ANSI Z87.1 high impact standards. 12 per box.

Di-Vision Glacier Safety Glasses, Clear LensDi-Vision Glacier black frame, clear lens safety glasses. These sturdy lightweight safety glasses feature fully adjustable temples. Ultra-Dura hardcoat resists scratching. Tight fitting. Z87+approved. 10 pair per box. 25 boxes per case.

A1111BCHC $1.90Item #

Item #SB1810S Clear LensItem #SB1810ST Clear Anti-Fog LensItem #SB1820S Gray LensItem #SB1830S Amber LensItem #SB1860SF IR 3.0 LensItem #SB1880S Clear I/O Lens

$1.30$2.25$1.99$1.99

$8.90$9.60$9.85

$4.90$5.25

$3.90

$4.05$4.15

$3.70

$3.60

$3.10$3.80

$3.80$3.55

$8.25$3.65

Carbondale™ Safety GlassesCarhartt® Carbondale™ black/brown frame safety glasses. The comfortable fit and stylish, twotone frame of the Carbondale™ is accentuated by the flexible rubbernosepiece. Sold by the pair. 12 Pairs per box.Item #CHB210D Clear LensItem #CHB210DT Clear, Anti-Fog LensItem #CHB218D Bronze LensItem #CHB220D Gray LensItem #CHB220DT Gray, Anti-Fog Lens

$7.10$7.65$7.60$7.60$8.10

Veratti® Mini OTG™ Safety GlassesEncon® Veratti® mini OTG™ safety glasses. Features de-signed for low profile prescriptio eyewear. Lightweight, durable frame. Defined side shield, browguard an underside for maximum protection. Over the glass style fits frames up to 5 inch width and 1 inch height. O e piece high impact poly carbonate lens. Scratchcoat® lens pro-vides protection against abrasions and scratching. 99% UVA and UVB protection. Meets ANSI Z87.1-2010 high impact standards. Item #12141004 Clear LensItem #12141104 Gray LensItem #12142004 Clear Anti-Fog LensItem #12142104 Gray Anti-Fog Lens

$3.70$3.70$4.30$4.30

3M™ Virtua™ Safety Glasses3M™ Virtua™ safety glasses. Single lens wrap-around design with style, protection and affordability in mind. 99% protection from UV rays. Meets ANSI Z87.1 standards. Lightweight. 10 per box.Item #11326 Clear Frame, Clear LensItem #11327 Clear Frame, Gray LensItem #11328 Clear Frame, I/O LensItem #11329 Clear Frame, Clear AF LensItem #11330 Gray Frame, Gray AF Lens

3M™ Fuel™ Red Mirror Lens Safety Glasses3M™ Fuel™ protective safety glasses. Constructed with a durable nylon frame, polycarbonate lens, color-accented vented temples and a coated scratch-resistance lens. Soft touch nosebridge and temple tips help add comfort. Red Mirror Lens, Metallic Sand Frame.

11640 $21.75Item #

3M™ Maxim™ clear Scotchgard™ anti-fog lens, black frame safety glasses. Stylish dual lens design with dual injected, cushioned brow bar for comfort and protec-tion. Three position lens angle adjustment with wraparound coverage. Adjustable temple lengths and soft nose bridge. 99% protection from UV rays. Scotchgard™ anti-fog, anti-scratch lens coating keeps lenses clear in rugged, dusty, steamy and wet environments. They also feature anti-static properties which help keep dust, dirt and particles from sticking to lens. Meets ANSI Z87.1 standards. Clear anti-fog lens. 20 per box. Sold by the pair.

MX101SGAF $8.75Item #

Safety Glasses & Goggles


Item #11872 Clear AF LensItem #11873 Gray AF LensItem #11874 I/O Mir AF Lens

3M™ Virtua™ AP light blue lens safety glasses. Single lens wraparound design with style, protection and affordability in mind. Integral side shields for added coverage. 99% protec-tion from UV rays. Hard coated lens. Meets ANSI Z87.1 standards. Lightweight. Light blue lens. 10 per box.

11816 $2.45Item #

3M™ Tour-Guard™ III clear uncoated lens safety glass-es. Single lens designed to fit over most personalprescription eyewear. Built in sideshields provide added protection from debris. Molded in nose piece. 99% protection from UV rays. Meets ANSI Z87.1 standards. Clear uncoated lens. Dispenser box. 20 per box.Item #41120 Small SizeItem #41110BX Regular Size

3M™ Maxim™ clear Scotchgard™ anti-fog lens safety goggles. Stylish dual lens design with adjustable elastic strap. Features a top and bottom vented anti-fog seal. Elastic strap provides a se-cure, comfortable fit. 99% pro-tection from UV rays. Scotchgard™ anti-fog, anti-scratch lens coating keeps lenses clear in rugged, dusty, steamy and wet environments. They also feature anti-static properties which help keep dust, dirt and particles from sticking to lens. Meets ANSI Z87.1 standards. Clear anti-fog lens. 20 per box. Sold by the pair.

MD101SGAF $12.45Item #

3M™ Virtua™ CCS Safety Glasses3M™ Virtua™ CCS safety glasses. Wraparound design with a comfortable vented foam lined gasket that helps limit eye exposure to nui-sance dust while minimizing fogging. Gasket easily removes for cleaning or alternate wearing positions. The Corded Earplug Control System (CCS) is designed to keep eyewear and earplugs attached, untangled and ready to use. Earplugs sold separately. Anti-fog polycarbonate lens helps block 99% of UV rays. Meets ANSI Z87.1 standards. 10 per box. 2 boxes per case.

$7.50$7.80$8.35

$2.25$2.35

$2.95$2.55$3.35$2.75$2.25

ComingSoon!

ComingSoon!

3M™ Virtua™ AP Light Blue Lens Safety Glasses

3M™ Maxim™ Scotchgard™ AF Safety Glasses 3M™ Tour-Guard™ III Clear

Lens Safety Glasses

3M™ Maxim™ Clear Scotchgard™ AF Safety Goggles Eva™ Clear Lens

Safety GlassesEva Womens Eyewear. The first safety eyewear fo women in the workforce. Designed specifically to fit women. Provides a more secure fit. Pink ribbon o the frame to signify that a portion of the proceeds goes to breast cancer research. Used for general manufacturing and anywhere eye protection is needed. Exceeds ANSI Z87.2-2003 high impact requirements.

250100900 $2.99Item #

Pyramex™ V2 Readers Safety GlassesBlack frame safety glasses. 100% polycarbonate scratch re-sistant curved lens that provides full side protection. Non slip nose buds secure the glass while providing a pillow soft comfort fit. Provides 99% protection from glare and harmful U -A and UV-B rays. Exceeds ANSI Z87.1 high impact standards.

Item #3011716 Clear Lens, 1.0 Mag.Item #3011717 Clear Lens, 1.5 Mag.Item #3011718 Clear Lens, 2.0 Mag.Item #3011719 Clear Lens, 2.5 Mag.Item #3011720 Clear Lens, 3.0 Mag.Item #3011712 Brown Lens, 1.5 Mag.Item #3011713 Brown Lens, 2.0 Mag.Item #3011714 Brown Lens, 2.5 Mag.

Stylish, ergonomic, nylon frame. Soft, comfortable, self-adjusting, rubber nose pad. “Cheaters” style with diopters for vision assistance. Meets ANSI Z87.1+ standards.

Reader Safety Glasses


Item #CH1110 Clear Lens, 1.0 Mag.Item #CH1115 Clear Lens, 1.5 Mag.Item #CH1120 Clear Lens, 2.0 Mag.Item #CH1125 Clear Lens, 2.5 Mag.Item #CH1130 Clear Lens, 3.0 Mag.Item #CH1215 Smoke Lens, 1.5 Mag.Item #CH1220 Smoke Lens, 2.0 Mag.Item #CH1225 Smoke Lens, 2.5 Mag.

Cheaters Readers Safety GlassesRadians® protective glasses with 1.0-3.0 diopter magnific -tion molded into polycarbonate lens. Lightweight nylon frame with 5-position lens angle adjustments. High-tech vented nosepiece. Protective sleeve case included. Meets ANSI Z87.1 high impact.

Clear lens, silver/black frame reading safety glasses. Sleek, contoured wrap around single lens design offering great protec-tion and coverage. Adjustable length temple with lens angle adjustment. Soft, adjustable nose bridge. 99% protection from UV rays. Top and bottom diopter. Meets ANSI Z87.1 standards.Item #114570000015 1.5 Mag.Item #11458 2.0 Mag.Item #114593M 2.5 Mag.

3M™ BX™ Readers Safety GlassesClear lens, silver/black frame safety glasses. Sleek, contoured wrap-around single lens design offering great protection and coverage. Adjustable length temple with lens angle adjustment. Soft adjustable nose bridge. 99% protection from UV rays. Meets ANSI Z87.1 standards.Item #11374 Clear Lens, 1.5 Mag.Item #11375 Clear Lens, 2.0 Mag.Item #11376 Clear Lens, 2.5 Mag.

V2G Reader Safety Glasses100% polycarbonate clear anti-fog lens safety glasses. With the ratchet adjustment headband and foam padded lens, these glasses provide the user with a comfortable seal to keep out dust and other airborne particles. New H2X anti-fog lens technology blocks out fog, mist, sweat and steam. Provides 99% protection from harmful UV-A and UV-B rays. Meets or exceeds ANSI Z87.1 high velocity impact standards. Interchangeable temples/headband included.Item #GB1810STR15 1.5 Mag.Item #GB1810STR20 2.0 Mag.Item #GB1810STR25 2.5 Mag.

Item #SB1810R10 Clear Lens, 1.0 Mag.Item #SB1810R15 Clear Lens, 1.5 Mag.Item #SB1810R20 Clear Lens, 2.0 Mag.Item #SB1810R25 Clear Lens, 2.5 Mag.Item #SB1810R30 Clear Lens, 3.0 Mag.Item #SB1820R15 Gray Lens, 1.5 Mag.Item #SB1820R20 Gray Lens, 2.0 Mag.Item #SB1820R25 Gray Lens, 2.5 Mag.Item #SB1820R30 Gray Lens, 3.0 Mag.

Go-Specs Readers Safety GlassesElvex Go-Specs primary objective is to provide an extra measure of protection in dusty and dirty environments. Wind blown particles such as dust, sand, cement, chemicals can cause serious eye irritation and damage. In addition to this specialized task, Go-Specs offers a full range of features and benefits: Impact resistant molded lens with SuperCoat anti-fogcoating. Closed cell EVA foam seal. Angle adjustable temples. 99% UV protection for UV A, B and C, 180-380 nm. Tested to ANSI Z87,1-2010. High velocity impact resistant.Item #RXGG40CAF1.5 Clear Lens, 1.5 Mag.Item #RXGG40CAF2.0 Clear Lens, 2.0 Mag.Item #RXGG40CAF2.5 Clear Lens, 2.5 Mag.Item #RXGG40GAF1.5 Gray Lens, 1.5 Mag.Item #RXGG40GAF2.0 Gray Lens, 2.0 Mag.Item #RXGG40GAF2.5 Gray Lens, 2.5 Mag. $11.75

$11.75$11.75

$10.95$10.95$10.95

$9.50

$9.50$9.50

$9.50

$9.50

$9.90$9.90

$9.90$9.90

$10.75$10.75

$11.25$10.75

$11.25$11.25

$10.95

$10.95$10.95

$10.95

$10.95

$11.95$11.95

$11.95

$10.75$10.75

$10.75

$9.60

$9.60$9.60

$9.60

$9.60

$9.90$9.90

$9.90

Jackson Safety™ V60 30-06™ RX Safety Glasses

3M™ BX™ Dual Reader Protective Eyewear

Safety Glasses & Goggles


Item #GG40CAF Clear Lens Item #GG40GAF Gray Lens

3M™ Lexa™ Splash GoggleGear™ clear Scotchgard™ anti-fog lens safety goggles. Aspheric lens design provides expansive coverage and virtually unobstructed view-ing range. Fully assembled goggles with soft flange seals and vented channels t increase air flo , minimizing fogging and keep out particulates. Scotchgard™ anti-fog, anti-scratch lens coating keeps lenses clear in rug-ged, dusty, steamy and wet environments. They also feature anti-static properties which help keep dust, dirt and particles from sticking to lens. Adjustable elastic head strap provides a secure, comfortable fi . Meets ANSI Z87.1 standards. Clear anti-fog lens. 10 per box. Sold by the pair.Item #LDM301SGAF MediumItem #LDL301SGAF Large

Item #11872 Clear AF LensItem #11873 Gray AF LensItem #11874 I/O Mir AF Lens

3M™ Virtua™ CCS Safety Glasses3M™ Virtua™ CCS safety glasses. Wraparound design with a comfortable vented foam lined gasket that helps limit eye exposure to nuisance dust while minimizing fogging. Gasket easily removes for cleaning or alternate wearing positions. The Corded Earplug Control System (CCS) is designed to keep eyewear and earplugs attached, untangled and ready to use. Earplugs sold separately. Anti-fog polycarbonate lens helps block 99% of UV rays. Meets ANSI Z87.1 standards. 10 per box. 2 boxes per case.

$7.50$7.80$8.35

$11.75$11.75

$7.25$7.55

Climazone™ Clear Lens Safety GogglesUvex Climazone™ black body/clear lens goggles. Ski-inspired design for cold and extreme weather conditions. Re-placeable dual pane lens: interior lens with anti-fog coating; exterior lens with scratch resistant hardcoat. Ventilation system minimizes fogging. Soft face foam and wide adjustable headband.

S390 $37.50Item #

Go-Specs AF GlassesElvex Go-Specs primary objective is to provide an extra measure of protection in dusty and dirty environments. Wind blown particles such as dust, sand, cement, chemicals can cause serious eye irritation and damage. In addition to this specialized task, Go-Specs offers a full range of features and benefits: Impact resistantmolded lens with SuperCoat anti-fog coating. 1.8 mm thick Polycarbonate lens with a base 6 curvature. Closed cell EVA foam seal. Angle adjustable temples. 99% UV protection for UV A, B and C, 180-380 nm. Tested to ANSI Z87,1-2010. High velocity impact resistant, Z87+.

Fury® Clear Lens Safety Goggles

$16.50Item #S1890C

Uvex Fury clear lens, black frame safety goggles. Sleek, frameless design with wraparound dual lens. Soft, flame resistant, face foamand headband. Excellent protection from dust and debris. Uvextreme® anti-fog lens coating. Meets ANSI Z87.1-2010 and CSA Z94.3 standards. Latex free. Made in USA. Clear lens. Sold by the pair. 10 pairs per box.

Pyramex V2G Strap Style GogglePyramex V2G safety glass, goggle style with foam pad and elastic strap. Headband features ratchet adjustment for perfect fit. Foam paddingforms a perfect seal to keep out dust and airborne par-ticles. Headband features quick fit retaine . Interchangeable temples/headband included with each pair of V2G Exceeds the ANSI Z87.1-2003 High Velocity Impact Standards. CE EN 166 Certified CAN/CS Z94.3-07.Item #GB1810ST Clear LensItem #GB1820ST Gray LensItem #GB1830ST Amber Lens

$8.95$8.95

$8.15

3M™ Lexa™ Splash GoggleGear™ Clear AF Goggles

ComingSoon!

3M™ Maxim™ clear Scotchgard™ anti-fog lens safety goggles. Stylish dual lens design with adjustable elastic strap. Features a top and bottom vented anti-fog seal. Elastic strap provides a secure, comfortable fit 99% protection from UV rays. Scotchgard™ anti-fog, anti-scratch lens coating keeps lenses clear in rugged, dusty, steamy and wet environments. They also feature anti-static properties which help keep dust, dirt and particles from sticking to lens. Meets ANSI Z87.1 standards. Clear anti-fog lens. 20 per box. Sold by the pair.

MD101SGAF $12.45Item #

ComingSoon!

3M™ Maxim™ Clear Scotchgard™ AF Safety Goggles

V50* Epic* AF Lens Safety GlassesJackson Safety* V50* Epic* anti-fog lens, black and red frame safety glasses. Lightweight design with soft, flexible non-slip temples Interchangeable head strap, temple bars with easy click system. Soft nosepiece for added comfort, padded liner provides complete seal to protect from dust and debris. Top and bottom direct ventilation combined with VISICLEAR 2® anti-fog coating provides exceptional anti-fogging protection. Meets ANSI Z87.1 standards. Anti-fog lens safety glasses. Sold by the pair.Item #33345 Clear Anti-Fog LensItem #35327 Smoke Anti-Fog LensItem #33347 Indoor/Outdoor Anti-Fog Lens

$13.50$13.50

$12.75

Goggles


Classic™ Clear Lens Safety GogglesUvex Classic clear lens, clear frame safety goggles. Made of soft, flexible PVC fo increased comfort and protection. Frontal strap attachment evenly distributes pres-sure around the face. Adjustable, textured neoprene headband prevents slippage. Excellent impact and chemical resistance. Fits over most Rx spectacles. 99% protec-tion from harmful UV rays. Uvextreme® anti fog coated lens prevents fogging. Hooded indirect venting system. Meets ANSI Z87.1-2010 and CSA Z94.3 stan-dards. Sold by the pair. 10 pairs per box.

S350 $8.75Item #Item #

Futura™ Clear Lens Safety GogglesUvex Futura clear lens, clear frame safe-ty goggles. Wrap-around sports style de-sign features excellent panoramic vision and fits over most prescription eyewea . Frosted brow guard reduces overhead glare. Offers protection against dust, mist, and impact and chemical splash. Indirect venting system along with high performance Uvextreme® antifog coating minimizes fogging in extreme environ-ments. Meets ANSI Z87.1-2010 and CSA Z94.3 standards. Latex free. Clear lens. Sold by the pair. 10 pair per box.

S345C $7.70 Item #

Uvex Stealth® Clear Lens Safety GogglesUvex Stealth clear lens, gray frame safety goggles. Low profile designwith soft, elastomer body that flexesand conforms to the face for a secure, comfortable, gap free fit. Rx insertavailable. Quick adjust neoprene head-band. Great impact resistance with 99% protection from UV rays. Uvex-treme® anti fog coating and indirect ventilation system to minimize fogging. Latex free. Meets ANSI Z87.1-2010 and CSA Z94.3 standards. Sold by the pair. 10 pairs per box.

S3960C $10.65

Cover GogglesCover goggles. Provides a wide, unobstructed field of vision andcan be worn with most half-mask respirators. The transparent protective PVC body permits a comfortable fit over prescriptioneyewear while protecting against impact and splash. Perforated for ventilation, easy adjusting strap design offers each user a personal fit. Meets the ANSI standards for high impact. Duramass scratch-resistant coating. Perforated, clear frame.

220 $2.15Item #

Item #

Direct Vented Clear AF Cover Goggle w/ StrapMCR direct vented, clear anti-fog cover goggle. Provides a wide, un-obstructed field of vision and canbe worn with most half-mask respi-rators. The transparent protective PVC body permits a comfortable fit over prescription eyewear whileprotecting against impact and splash. Easy adjusting strap design offers each user a personal fit, rubber straps are latexfree, superior resistance to scratches. Features direct ventilation, clear anti-fog lens, and a perforated frame with rubber adjust-able strap. Duramass scratch-resistant coating, Duramass AF4 anti-fog coating. Meets the ANSI standards for high impact and meets or exceeds ANSI Z87.1 standard. Clear frame.

225 $2.50

Item #

Anti-Fog Chemical Splash GoggleAnti-fog chemical splash goggle for indoor applications that require impact protection. Provides 99% protection from harmful UV-A and UV-B rays. Also features vent caps to re-strict the influx of liquids

235 $2.75

V2G Plus™ Safety GogglesPyramex™ V2G Plus™ black frame safety goggles. Head band style goggle with quick fit retainer and ratche adjustment for secure comfortable fit. Foam padding forms a perfec seal to keep out dust and debris. Lens and frame are vented to in-crease airflow and prevent fogging 100% polycarbonate scratch resis-tant lenses. 99% protection from harmful UV-A and UV-B rays. Interchangeable temples and head band included with each pair. Exceeds ANSI Z87.1 high velocity impact standards. 12 per box.Item #GB6410SDT Clear AF LensItem #GB6420SDT Gray LensItem #RX6400 Rx Insert

$14.75$15.75

$9.95

Fury® Clear Lens Safety Goggles

$16.50Item #S1890C

Uvex Fury clear lens, black frame safety goggles. Sleek, fra-meless design with wraparound dual lens. Soft, flame resistant,face foam and headband. Excel-lent protection from dust and debris. Uvextreme® anti-fog lens coating. Meets ANSI Z87.1-2010 and CSA Z94.3 standards. Latex free. Made in USA. Clear lens. Sold by the pair. 10 pairs per box.

V-Maxx® Clear AF Direct Vent Safety GogglesNorth V-Maxx clear polycarbonate anti-fog safety goggles. Futuristic wrap-around styling provides excellent panoramic vision. Pivoting headband clips to adjust strap around hard hats. Adjustable red elastic headband for secure, comfortable fit. Direct vent fo great air circulation. Fog-Ban® anti-fog lens coating. Meets ANSI Z87.1-2010 and CSA Z94.3 standards. 10 per box. Sold by the pair.

11250800 $5.85Item #

Welding Protective Eyewear


Item #SB4960PR15 1.5 Magnif. LensItem #SB4960PR20 2.0 Magnif. Lens

MCR Shade 5 Welding GoggleMCR Shade 5 Welding Goggle. These shade 5 goggles are treated with an exclu-sive Duramass® scratch resistant coating giving you superior impact resistance over traditional glass plates.

93212 $7.75Item #

$15.50$15.50

Di-Vision Anti-Fog Goggle w/ Shaded LensDi-Vision anti-fog lens safety goggles. Goggles provide protection from impact in grinding, foundry, general industrial applica-tions and other heavy dust environments. Item #A51063.0 Shade 3Item #A51065.0 Shade 5

Uvex Genesis® Shaded Lens Safety GlassesUvex Genesis® shaded Infra-dura lens, black frame safety glasses. Wrap around dual lens style for uncompromised periph-eral vision and superior coverage. Item #S3207 Shade 3.0 LensItem #S3208 Shade 5.0 Lens

Item #ST1130 Shade 3.0 LensItem #ST1150 Shade 5.0 Lens

Storm® Green Shaded Lens Safety GlassesMCR Crews Storm® Green shaded lens, black frame safety glasses. Wrap around lens constructed of lightweight, scratch-resistant polycarbonate.

Uvex Horizon™ Lens Safety GlassesUvex Horizon black frame flipup safety glasses. Ultra-dura HC lens coating and cushioned temple style. Advanced, two tone sport-style frame with textured detail. Item #S212 Clear Lens w/ Shade 3 Flip-UpItem #S213 Clear Lens w/ Shade 5 Flip-Up

$24.75$29.60

$9.60$9.60

$10.90$10.90

$8.90$8.90

#170SB

#137

#337

Jackson Safety™ Cord Mounted Capshield

337 $16.90Item #

Ratchet Headgear w/ Spark Deflector

170SB $13.90Item #

Jackson Safety™ Coil Spring Capshield

137 $22.60Item #

Enables attachment of all Jackson visors.

For non-slotted caps. With a plastic channel that fits over the bill and secureswith an adjustable rubber headband.

Metal device for non-slotted caps. Has a curved aluminum channel and coil spring attachment.

F30 Acetate FaceshieldsGreat for use with general impact and splash applications. Bound aluminum edging retains desired shape. Meets ANSI Z87.1 standards. #3442 and #8042 dark green visors also good for reflective glare protecti n.Item #3440 15” x 9”, Clear LensItem #3442 15” x 9”, Dark Green LensItem #8040 12” x 8”, Clear LensItem #8042 12” x 8”, Dark Green Lens $6.75

$5.65$7.65$6.65

181 $10.60Item #

40 $14.75Item #

F30 Clear Chin Tuck Faceshield

$16.75$16.95

Item #3463 Shade 3.0 LensItem #3465 Shade 5.0 Lens

F50 Polycarbonate Special Faceshields

Onix Plus Reader Safety Glasses, 3.0 Filter Lens

Lift Front Shade 5 GoggleLift front locks in open or closed position soft vinyl frame is captured for comfort-able fit. ented hold minimizes fogging. Includes Cover plates and shade 5.0 filte .

93213 $10.75Item #

Worn for applications and in environments where others are performing welding tasks such as torch brazing, torch soldering, gas welding and oxygen cutting. Meets ANSI Z87.1 2010 Standards. 8” x 15.5” x .060”. Unbound.

F30 Chin tuck faceshield. These acetate faceshields are great for manufacturing, landscaping, food processing and construction industries. When used properly they can increase protection from general splash and flying debris. Excellent cold flexibili . Meets ANSI Z87.1 Standards.

The dual lens and frame with unique outer flip lens system pr -vides users with the ability to flip outer len up for general applications, or to flip oute lens down to prevent excessive glare.

F60 Wire FaceshieldF60 wire faceshield, 9” x 15-1/2”. To be applied over a faceshield to dissipate heat, preventing the visor from warping in high heat applications. They are not intended for impact protection.


Magic Heavy Duty Metal Lens Cleaning DispenserMagic heavy duty metal dispenser, lens cleaning station. This metal station keeps plastic and glass lens cleaning supplies organized and ready-to-use. Sturdy, lockable unit holds two packets of 760 wet-strength wipers, and one 16 oz spray bottle of Pure Sight or Fog-Be-Gone lens cleaning solution. Dispenser only, no tissues or spray included.

LC1776D $36.00Item #

Oversized Eyeglass Case w/ Pocket Clip, BrownEconomical, light-weight oversized eyeglass case with pocket clip. Helps to extend the life of your protec-tive eyewear. Brown. Extra Large.

99665 $2.55Item #

Vinyl Eyeglass Case w/ Belt Clip, BlackCrews black vinyl eyeglasses case with adjustable Velcro® closure on a pro-tective flap andbelt clip on back. Helps to extend the life of your pro-tection eyewear.

201CR $2.50Item #

Clip-on Breakaway Eyeglass Cord, BlackCrews, economy clip-on breakaway eyeglass cord, black. Helps prevent the loss of protective eyewear and allows your safety glasses to hang conveniently around neck when not in use. Easily reattached if snagged, pulled or caught.

214BLACK $1.50Item #Magic Lens Cleaning Refill TissuesMagic lens cleaning tissues. Wet-strength wiper refills for the LC1776Dmetal station. Lint free. 760 5”x 8” wipes per pack, 18 packs per case.

LC1760 $2.95Item #

Item #TW100D Pure Sight Item #TW100DS Fog Be Gone

Magic Lens Cleaning TowelettesMagic lens cleaning towelettes, 100 per box. #TW100D Pure Sight towelettes provide streak-free lens cleaning and the #TW100DS Fog Be Gone towelettes provide superior protection against fogging. Both contain no silicone. Use where extreme temperatures are a factor such as paper mills, foundries, freezers and meat lockers. These 5” x 8” individually wrapped tow-elettes are safe to use on treated lenses/goggles.

Item #

Bausch & Lomb pre-moistened lens cleaning tissues are silicone-free. Designed to clean all plastic and glass lens as well as computer screens. Anti-fog and anti-static treated 100 wipes per dispenser box.

8574GM $13.25

Uvex hard eyewear case with belt loop, black. Fit most Uvex eyewear to protect lenses from scratches and abrasion. Extremely lightweight and durable. Not suitable for Uvex Astrospec® 3000, or Uvex Astro OTG™ 3001 series. Black. Sold by the each. 10 per case.

S489 $6.50

Uvex Rip-Stop nylon eye-wear bag, black. Fits most Uvex eyewear to protect lenses from scratches and abrasion. Not suitable for Uvex Astrospec® 3000, or Uvex Astro OTG™ 3001 series. Extremely lightweight and durable. Black. Sold by the each. 10 per case.

S487 $3.90

Item #

#S487

Slip-on Breakaway Eyeglass Cord, BlackCrews economy slip-on breakaway eye-glass cord, black. Helps prevent the loss of protective eyewear and allows your safety glasses to hang conveniently around neck when not in use. 24 inch total length.

210 $0.65Item #

#210RED

#210

Economy Nylon Eyeglass Cord, RedEconomy slip-on nylon eye-glass cord, red. Helps prevent the loss of protective eyewear and allows your safety glasses to hang conveniently around neck when not in use.

210RED $0.65Item #

Fully Adjustable Eyewear RetainerProudly made in the USA, the Original Standard End fits awide variety of frame styles and sizes, while the Extra Large CHUMBO series accommodates wider frames similar to those found on Uvex DuoFlex glasses. Con-structed with tough, durable, soft and comfortable, machine washable, 100% all-natural cotton.Item #CHUMBLK BlackItem #CHUMNB NavyItem #CHUMRE Red Item #CHUMYE YellowItem #CHUMBOBLK Black(XL)Item #CHUMBOBLU Blue(XL)

Sight Savers Lens Cleaning Tissue

$10.25$10.95

$2.35

$2.65$2.35$2.35

$2.65

$2.35

Eyewear Accessories

Item # #S489

Rip Stop Nylon Eyewear Bag

Hard Eyewear Case w/ Belt Loop

Uvex Clear® Permanent Lens Cleaning StationUvex Clear permanent lens cleaning station. Includes one 16 ounce lens cleaning solution spray bottle, spe-cially formulated for anti-fog and scratch resistant hard coat lens. Four boxes of non-abrasive dry tissues, 500 tissues per box, and a 3-1/2” x 4-1/2” mirror. Station measures 22-1/2” x 12-1/2” in size. Screw mounts and adhesive foam for quick wall mounting. Perma-nent lens cleaning station.

S461 $33.75

Magic Pure Sight Lens Cleaner, 1 GallonMagic Pure Sight lens cleaner, 1 gallon bottle. The Pure Sight formula is perfect for anti-static and anti-fogging cleaning needs with no streaking. Safe to use for glass, plastic, polycarbonate lenses and special coat-ings. Silicone free. 1 gal-lon, 4 gallons per case.

LCL211C $11.50

Lens Cleaning


Uvex Clear® Lens Cleaning Wipes, 100/BXUvex Clear lens cleaning wipes. Pocket sized, pre-moistened towelettes are great to use when on the go and are convenient to use. Specifically formulated for anti fog and scratch resistanthard coats. These wipes can help with extending the life of your protective eyewear. Lens cleaning wipes. 100 per box.

S468 $11.50Item #

Item #

Item #

Uvex Clear® Lens Cleaning Tissues, 500/BXUvex Clear lens cleaning tissues. Non-abrasive dry tissues designed for use with lens cleaning solutions (S463 and S464), both sold separately. Specifically formulated for anti fog andscratch resistant hard coats to help extend the life of your pro-tective eyewear. Lens cleaning tissues. 500 tissues per box.

S462 $3.40Item #

Uvex Clear® Lens Cleaning Solution, 16 ozUvex Clear lens cleaning solution 16 ounce spray bottle. Specifically formulated for anti-fog and scratch resistanthard coats. Alcohol and silicone free solution works great for extending the life of protective eyewear. Also great for refilling your Uvex Clear cleaning station (S461) soldseparately. 16 ounce lens cleaning spray bottle solution.

S463 $4.60

/EA

/BX

/BTItem #

#S461

#S462#S463

#S467#S468

Fog Eliminator Cloths, Alcohol Free, 100/Bx

S477 $65.50

Uvex® Fog Eliminator Cloths. Formulated to effectively protect lenses from all types of fogging caused by cold, high humidity or sudden temperature changes. Safe for all surfaces, including polycarbonate and glass. Each cloth provides 40 applications. Streak and film free, alcohol andsilicone free. Non-flammable andnon-toxic. Made in USA.

Item #

Magic Fog-Be-Gone Lens CleanerMagic Fog-Be-Gone lens cleaner, 16 oz modern round bottle. The Fog-Be-Gone solution is perfect for superior anti-fogging during extreme temperature changes. Safe to use for glass, plastic, polycarbonate lenses and special coatings. Silicone free. 16 oz bottle, 12 bottles per case. Also available is the Magic hooded pump for the 16 oz. spray bottle (#LCL211BSP). Use it as a replacement pump, or make a regular 16 oz. bottle into a spray bottle by simply twisting on this hooded pump.Item #LCL211B 16 oz. BottleItem #LCL211BSP Spray Pump

VisionAid Lens Cleaning SolutionMagic Fog-Be-Gone lens cleaner, 3.5oz modern round bottle. The Fog-Be-Gone solution is perfect for superior anti-fogging during extreme temperature changes. Safe to use for glass, plastic, polycarbonate lenses and special coatings. Silicone free.Item #LCL211E $0.50/BT

/BT/EA

Aerosol Lens Cleaning Solution, 15 oz.Lens cleaning fluid in an aerosol can.Cleaning fluid for glass and plasticlenses in a non-fluorocarbon aerosolcan. Anti-fog, anti-static formula with no silicone. 15 ounce can, 12 cans per case.

LCL216 $3.35Item # /CN

Item #

$1.90$0.85

Uvex Clear® Disp. Portable Lens Cleaning Station

S467 $13.60

Uvex Clear portable lens cleaning station. Includes one 16 ounce lens cleaning solution spray bottle, specificallyformulated for anti-fog and scratch resistant hard coat lens. 1500 non-abrasive dry tissues when combined with clean-ing solution can extend the life of your protective eyewear. Easily stores in a can allowing you to be prepared for any jobsite location. Completely disposable. Portable lens cleaning station.

Headgear & Faceshields


Item #

Clear Polycarb Faceshield, Molded, 9” x 14-1/2”3M™ clear polycarbonate faceshield visor provides excellent impact protection for general purpose applications. Offers some moderate heat resistance. Easily fits 3M™ headgear assemblie without tools, snaps, or cams. Windows mount inside crown for added support. Meets ANSI Z87.1 standards. Durable. Molded. Clear. 9” x 14-1/2” x .08”. 10 per case. Sold by the each. WP96 $6.90

Item #

Clear Propionate Faceshield, Molded, 9” x 14-1/2”3M™ clear propionate faceshield visor that provides excellent splash resistance and face protection. Easily mounts to 3M™ headgear systems without tools, snaps, or cams. Mounts inside crown for added protection. Meets ANSI Z87.1 standards. Mold-ed. Durable. 9” x 14-1/2” x .08”. 10 per case. Sold by the each.

W96 $6.30

Clear Polycarb Faceshield, Wide, Flat, 9” x 18”3M™ clear polycarbonate faceshield visor provides high im-pact face protection. Wide, larger size helps with additional coverage when needed. Easily fits any 3M™ headgearwithout tools, snaps, or cams. Meets ANSI Z87.1 standards. Durable, clear polycarbonate visor. Flat. 9” x 18” x .08”. 25 per case. Sold by the each. WP96X $8.10Item #

Item #

3M™ Polycarbonate Faceshield Visor, Shade 5.03M™ Polycarbonate faceshields are made of durable, splash and impact-resistant polycarbonate. Protects workers from infrared hazard exposure. Window is a full .080 inch thick, great for rugged operations. Ideal for low-heat viewing and gas brazing, welding, and cutting. Simple attachment system uses no cams, straps or buckles. Meets ANSI Z87.1 standards. Faceshield Size: 9 inches height x 14.5 inches width x 0.080 inch thick-ness. Shade 5.0, 10 per case. Sold by the each.

W96IR5 $26.50

Steel Mesh Faceshield Screen, Molded, 9” x 14-1/2”3M™ steel mesh faceshield visor screen. Provides ventila-tion and face protection for high heat environments. Eas-ily mounts to any 3M™ headgear systems without tools, snaps, or cams. Matte finish on faceshield for minimalreflection. Meets ANSI Z87.1 standards. Molded. 9” x 14-1/2”. 10 per case. Sold by the each.

W96M $27.10Item #

3M™ shade 3 polycarbonate faceshield features a full .08” thickness that is great for rugged operations. Ideal for low heat viewing. Made of durable, splash and impact resistant polycarbonate. Easily attaches to any 3M™ headgear. Meets ANSI Z87.1 standards. Polycarbonate faceshield visor. Molded. Shade 3. 9 inches x 14-1/2 inches x .08 inches. 10 per case. Sold by the each.

8270510000 $24.90Item #

HCP8 Ratchet Headgear W/ Chin Protector3M™ HCP8 ratchet headgear features a high strength thermoplastic crown protec-tor providing excellent impact resistance and reliable face protection. Features a clear polycarbonate chin protector for added coverage and downward visibility. Five position crown strap with easy to turn knob ratchet suspension for secure com-fortable fit. Order WP98 visor separatel . Meets ANSI Z87.1 standards. Durable ratchet headgear with chin protector. Blue crown. 10 per case. Sold by the each.

HCP8 $19.60Item #

Clear Polycarbonate Faceshield, Flat, 7” x 14-1/2”3M™ clear polycarbonate faceshield visor provides workers with reliable high impact face protection for general purpose applications. For use with 3M™ chin protector CP8CAB only, (sold separately). Easily fits 3M™ headgear assemblies withouttools, snaps, or cams. Visor mounts inside crown for added support. Meets ANSI Z87.1 standards. Flat. Clear polycarbon-ate visor. 7” x 14-1/2” x .04”. 10 per case. Sold by the each.

WP98 $6.90Item #

H8A Ratchet Headgear W/ 5 Position Crown Strap3M™ H8A ratchet headgear features a high strength thermoplastic crown which provides excellent impact resistance and face protection. Easy to turn knob for ad-justable ratchet suspension. Five position crown strap, gives users as wide choice of faceshield, visors to help provide a precise fit and protection for any task. MeetsANSI Z87.1 standards. Durable ratchet headgear. Blue crown. 10 per case. Sold by the each.Item #H8A Standard HeadgearItem #H10 Headgear w/ Crown Extender

#WP96 #W96 #W96IR5 #W96M #W8270510000

$14.20$24.75

Shade 3 Polycarbonate Faceshield, Molded, 9” x 14-1/2”

Bullard® lightweight, durable black steel mesh screen visor with aluminum banding. Provides maximum ventila-tion in humid working conditions and superior protection in a variety of environments such as brush cleaning and trimming. Does not provide splash or UV protection. Meets ANSI/ISEA Z87.1-2010 standards for basic impact protection. Designed to fit all Bullard brackets. Curved. Mesh screen viso . 8” x 15” 24” mesh. Sold by the each. 25 per case.

8S24 $21.50Item #

Curved Mesh Screen Visor



Aluminum Front-Mount Faceshield Bracket, GoldBullard® aluminum front-mount faceshield bracket. Durable, lightweight bracket constructed for rugged, gold anodized aluminum. Ideal for chemical handling and high heat applica-tions. Designed to fit all Bullard® faceshield visors and mostBullard® hard hat styles. Gold. Sold by the each. 25 per case.

100G $12.90

Item #

Item #

$4.25

Item #840P 8” x 15” x .040”Item #860P 8” x 15” x .060”Item #880P 8” x 15” x .080”

Bullard® Polycarbonate Faceshield VisorBullard® clear heat formed polycarbonate faceshield visors. Provide excellent protection for high heat applications where there is little or no exposure to chemicals. Heat formed visors are curved to the shape of the bracket to minimize stress cracking and improve ease of attachment. They fit all Bullard® brackets and mee ANSI/ISEA Z87.1-2010 standards for high impact. Sold by the each.

840M $4.85Item #

#300B #100G

#SENTINEL1

Flat Acetate Faceshield

#840P

Bullard® dielectric nylon faceshield bracket. This durable, lightweight front mounting nylon bracket is ideal for general duty applications. Designed to fit all Bullard® faceshieldvisors and most Bullard® hard hat styles. Non-conductive. Blue. Sold by the each. 25 per case.

300B $10.55

Dielectric Front Mount Faceshield Bracket, Blue

$12.10$9.35$5.25

Dielectric Faceshield Bracket

312B $17.20

Bullard® dielectric faceshield bracket. Durable, front mounting nylon bracket is ideal for general duty applications. Designed to fit Bullard® C33, Advent®, C34, S61 and S71 hard hat styles. Lightweight. Sold by the each.Item #

Goldline Hard Hat Bracket, Full Brim

112G $17.90

Bullard® goldline hard hat bracket, full brim. Durable, lightweight bracket constructed for rugged, gold anodized aluminum. Ideal for chemical handling and high heat appli-cations. Designed to fit C33, C34 9 1H, FH911H and S71 hard hat styles. Gold. Sold by the each. 25 per case.Item #

#312B

#300BW

#112G

$4.80

$4.65

Bullard® SENTINEL2 faceshield headgear. Stan-dard headgear with black ABS crown and chin protection combination. SENTINEL headgear offers the ultimate value in light-weight, comfortable face protection. This lightweight, molded ABS plastic headgear in non-conductive when used with a non-conductive visor. Includes a Flex-Gear® ratchet suspension and a Sportek™ brow pad to pull moisture away from the skin. SENTINEL headgear is designed to fit 840MX2 or 840PX2 visors onl , (ordered separately). Meets or exceeds ANSI/ISEA Z87.1-2010 standards. Durable faceshield headgear with black ABS crown and chin protection.

SENTINEL2 Headgear w/ Crown & Chin Protection

SENTINEL2 $12.85Item #

$5.65

Sentinel 1 Ratchet Headgear w/ Crown ProtectorBullard® Sentinel 1 standard ratchet headgear with black ABS crown protector. Offers the ultimate value in lightweight, comfortable face protection. Molded ABS plastic headgear provides reliable protection from general applications. Fea-tures Flex-Gear® ratchet sizing and a Sportek brow pad to pull moisture away from skin. Designed to fit with most Bu -lard® faceshields. All faceshields sold separately. Meet and or exceeds ANSI/ISEA Z87.1-2010 standards. Sold by the each. 10 per case.

SENTINEL1 $10.75Item #

Dielectric Faceshield Bracket w/ Neoprene Gasket

300BW $13.90

Bullard® dielectric faceshield bracket with neoprene gasket. Durable, front mounting nylon bracket is ideal for general duty applications. Designed to fit Bullard® C30, Advent®, S51, S61 and S62 hard hat styles. Lightweight. Sold by the each.Item #

SENTINEL2 Clear Polycarbonate Headgear Visors, 7” x 15 x .040”Item #840MX2 Straight VisorItem #840PX2 Curved Visor

Designed for use with Bullard® SENTINEL2 headgear assembly. Provides reliable, added face protection and coverage.Meets ANSI/ISEA Z87.1-2010 standards.Sold by the each. 10 per case.

SENTINEL2 Chin Protectors

Item #CP1 BlackItem #CP2 Clear

#SENTINEL2#840PX2

#CP1

Bullard® clear acetate faceshield visor provides reliable protection for chemical ap-plications and light impact general purpose duties. Easily fits to all Bullard® brackets Meets ANSI/ISEA Z87.1-2010 standards for basic impact. Flat. Clear acetate visor. 8” x 15” x .040”. Sold by the each. 50 per case.


#F5400


Item # Headgear CrownF4400 Quick-Lok 4”F4500 Quick-Lok 7”F5400 Speedy Loop 4”F5500 Speedy Loop 7”

Item # Material For Use WithFM70 Plastic Caps P2, E2FM71 Plastic Full Brim Hard Hat E1FH66 Aluminum Caps P2, E2

Item #4199CLR Clear LensItem #4199DGN Dark Green LensItem #4199IRUV3 Shade 3 Lens Item #4199IRUV5 Shade 5 Lens

#F4400#F5500

High Performance® Fibre-Metal® visor headgear is equipped with Quick-Lok cups which can be securely and easily mounted onto and removed from the cap without the use of any tools. For use with Protective Caps, E2Q, P2Q or any Fibre-Metal® cap hard hat equipped with 4000 series Quick-Lok connectors. #F4400 has a 4” crown, #F4500 has a 7” crown. Fibre-Metal® Speedy Loop headgear have the speedy loop mounting spring. No tools or modified caps are r -quired. Attach to Cap Series hard hats. #F5400 has a 4” crown, #F5500 has a 7” crown.

High Performance® Headgear

#F4500#FM71 #FH66

Item #F300 3” CrownItem #F400 4” CrownItem #F500 7” Crown

Fibre-Metal® Hard Hat AdaptorsFibre-Metal® hard hat adaptors. Compatible with all Fibre-Metal®, North and many other hard hat systems. Available in ultra-heat resistant aluminum or dielectric thermoplastic construction. Models for standard caps and full brim hard hats. Window mounting system matches Fibre-Metal® headgear.

Fibre-Metal® Ratchet Visor HeadgearFibre-Metal® high performance ratchet visor headgear. Comfort-able ratchet suspension ensures proper fit. 3”-7” crown o fers additional top of head protection. Please order Fibre-Metal® visors separately.

High Performance® Face Shield WindowsFibre-Metal® faceshield windows with wide view are injection molded from propionate, which is superior to other window materials in every significant performance chara -teristic. They are pre-formed at the factory to the exact curve of our crown protectors for easy installation, an exact fit and aperfect seal against dust, dirt and debris. The unique angled shape clears the shoulders during head movement. All high performance windows are .060” thick for an extra margin of protection. Fits Fibre-Metal® F-400, F-500, FM-70, FM-71 and FH-66 Series. Meets and exceeds ANSI Z87.1 standards. Size 8” x 16-1/2” x .060”. Sold individually.

High Performance® Face Shield WindowsFibre-Metal® high performance face shield. Injection molded from propionate, which makes it superior to other face shields in every significant performance. Made for easy installationand exact fit and a perfect seal against dust, dirt and debris.The unique angled shape clears the shoulders during head movement. Meets and exceeds ANSI Z87.1 standards. Eco-nomical. Lightweight. Extended view. 9-3/4” x 19” x .060”.

#FM70

$12.75$13.75$17.75

$14.50$17.50$14.50$17.50

$15.75$17.40$19.35

$5.50$8.90$9.60

$17.70

$10.75

$16.75$16.75

$17.70$5.95

Item #4178CLR Clear LensItem #4178TVGY Gray LensItem #4178DRK Dk Grn LensItem #4178IRUV3 Shd 3 LensItem #4178IRUV5 Shd 5 Lens

RACK’EM™ Over-the-seat hard hat rack. Designed for use in passenger vehicles or pickup trucks. Heavy-duty steel con-struction easily secures your hard hat in place while driving the vehicle. Fits all regular and wide brim hard hat styles.

$14.605002


Faceshields & Hard Hat Racks

Item # Material Tint Style Size10117750 Polycarbonate Clear Flat 8” x 17” x .040” 10115840 Polycarbonate Clear Side Contour 8” x 17” x .060”10115839 Polycarbonate Clear Side Contour, AF/AS 8” x 17” x .060”10115842 Polycarbonate Green Side Contour, AF/AS 8” x 17” x .060”10115836 Polycarbonate Clear Side Contour 8” x 17” x .040”10115863 Polycarbonate Clear Side Contour 9-1/2” x 17” x .040”10115853 Polycarbonate Clear Molded 10-3/8” x 17” x .098”10115859 Polycarbonate Shade 3 Molded 8” x 17-1/4” x .070”10115861 Polycarbonate Shade 5 Molded 8” x 17-1/4” x .070”10116557 Mesh (Ventilated) - - 8” x 17” x .100”10115851 Propionate Clear Molded 9-1/4” x 18” x .098”10115847 Polycarbonate Arc Flash 12.9 cal 9-1/4” x 18” x .065”

#10115836

#10115853

#10117750

#10116557

Item # Style Size10117781 Polycarbonate (Standard) 8” x 17” x .04”10115837 Polycarbonate (Contoured) 8” x 17” x .04”10117783 Polycarbonate (Standard) 8” x 17” x .06”10116558 Mesh (Ventilated) 8” x 17” x .1”

MSA V-Gard® VisorsMSA V-Gard® Visors offer superior protection and are designed to be used with MSA V-Gard frames, helmets and ear muffs! All V-Gard polycarbonate and propionate visors meet the requirements for ANSI/ISEA Z87.1-2010 (the “Standard”). Polycarbonate visors are suitable for most applications where impact hazards exist. Propionate visors provide impact resistance and are good for many applications where chemical splash haz-ards may occur. Consult the MSA Chemical Application Guide for recommendations on chemical resistance. Mesh visors provide ventilation in humid conditions. Great for outdoor applications such as brush clearing and trimming. These visors meet the general protector requirements of the Standard. Does not provide impact, splash or UV protection. Shade 3 & 5 IR visors help protect against infrared up to Shade 3 or 5 as applicable. Perfect for welding, metal pouring, gas soldering, light cutting and brazing applications.

#10115837

MSA V-Gard Nitrometers for Use with V-Gard Chin ProtectorsAvailable in steel mesh or polycarbonate. The mesh Nitrometer is a lightweight, durable epoxy coated steel mesh, bound with heavy duty plastic edging. This visor provides maximum ventilation in humid working conditions, and superior protection in a variety of environments, such as, brush clearing and trimming. Can be used only with standard and V-Gard® retractable chin protectors. Does not provide impact, splash or UV protection. Meets general protector requirements for ANSI/ISEA Z87.1-2010. The durable polycarbonate Nitrometer offers superior protection from flying debris, splash or spra . Engineered with improved side to side coverage and is suitable for most general purpose, indoor and outdoor applications. Provides UV protection and resistance to some chemical splash. Can be worn only with V-Gard chin protectors (order separately). Meets impact requirements for ANSI/ISEA Z87.1-2010.

#10116558

Item #

Rack’Em™ mount- any-where hard hat rack. Keeps hard hats where needed in vehicles, office, or factor . Heavy-duty Steel construc-tion with Secure-Mount™ foam tape easily attaches rack to any flat surface. Holdsup 20 pounds when attached with foam tape. Fits all regular and wide brim style hard hats.

$24.355001RACK

RACK’EM™ magnetic mount hard hat rack. Easily holds and secures hard hats on any flatsteel surface- desks, filecabinets on metal cu-bical parts in the office,laboratory, quality control department, and construction trailer. Fits all regular and wide brim style hard hats.

$34.005003RACK

Mount-Anywhere Hand Hat Rack

Magnetic Mount Hard Hat Rack

Item # Item #

Over-The-Seat Hand Hat Rack

$4.99

$6.65$8.99

$4.99

$5.15

$21.75$22.65$10.75

$72.75

$6.15$13.90$21.75

$6.35$24.75

$14.60

$5.99

#10115828

MSA V-Gard® Chin ProtectorsV-Gard® chin protectors work as a system with select V-Gard nitrometer visors to help provide extra protection from impact and splash hazards to face, neck and chin area. Compact, lightweight design with reduced width and sharper turn provides better under the chin coverage. The opaque ma-terial ensures safety and standards compliance with clear, tinted, shad-ed, and coated V-Gard® Visors.

MSA V-Gard® Universal FrameMSA V-Gard® Universal Frame. A V-shaped channel frame with a slope design that allows liquids, chips, and other materials to slide off and away from the line of sight. Features a heavy duty flat rubber strap to allow easy andsecure placement of frame on hard hat. The debris control creates a tight seal between the helmet and frame. De-signed to work with most half-mask respirators and other personal protective equipment such as earmuffs. Fits all MSA slotted and non-slotted caps. Meets requirements for ANSI/ISEA Z87.1-2010. Black.

MSA V-Gard® Slotted Cap FrameMSA V-Gard® Slotted Cap Frame. A V-shaped channel frame with a sloped design that allows liquids, chips, and other materials to slide off and away from the line of sight. Easily adjusts to the brim of your hard hat with a simple push or pull. Designed to work with most half-mask respirators and other personal protective equipment such as earmuffs. Fits all MSA slotted caps. Meets requirements for ANSI/ISEA Z87.1-2010.


Headgear & Accessories

Item #

Item #

Item #

#10115730#10121268#10115822

Item # Description10115822 With Debris Control 10121268 Without Debris Control

Item # Description10115827 Standard 10115828 Retractable

#10115827

Item #459458 For MSA CapsItem #449895 For MSA Full Brim Hats

#10121266

Item # Description10115730 With Debris Control10121266 Without Debris Control

V-Gard® Headgear for general purpose. A comprehensive face protection system that can be used when a helmet is not needed. Features a seven-point crown adjustment, easy-to-grip adjustment knobs, and a replace-able cushioned headband. For use only with V-Gard® Visors. Meets requirements for ANSI/ISEA Z87.1-2010. Black.

$15.7510127061

V-Gard® Full Brim Hard Hat FrameA V-shaped channel frame with a slope design that allows liquids, chips, and other materials to slide off and away from the line of sight. Features a heavy duty flat rubber strap to allow easy an secure placement of frame on hard hat. Designed to work with most half mask res-pirators and other personal protective equipment such as earmuffs. Fits all MSA full brim hats. Meets requirements for ANSI/ISEA Z87.1-2010.

$13.7510116627

Rubber Goggle Retainers For Caps and Full Brim HelmetsMSA goggle retainers offer a secure hold. Specially designed for use with MSA goggles and caps / hard hats. Easy to install, no tools necessary. Easily adjustable for a more comfortable fit. Black.

2-Point Polyester Web Chin StrapMSA 2-point polyester chin strap. Non-metal, flexibleconstruction and adjustable design for long-wearing comfort. Attaches directly to shell. They prevent hard hats from falling off or being bumped off workers heads due to the rigors of the job. OSHA states that workers wearing hard hats at eleva-tions create potential hazards for those below them. For the safety of the workers below, OSHA requires employers to pro-vide chin straps for the hard hats worn by workers at higher elevations or at the edge of a pit.

$5.6588128

#459458 #449895

V-Gard® Headgear, General Purpose

$11.65$8.35

$11.65$8.35

$15.75$16.75

$4.99$8.35


H-800 Series Full Brim Vented Hard Hat

$18.95

$21.25

H-800 Series Full Brim Vented Hard Hat w/ Uvicator™Provides all the features and benefits of the standard H-800 Se ies hard hat mentioned above. In addition, these hard hats have the Uvicator™ sensor which monitors the hat’s exposure to sun (UV light), which can cause the hard hat shell to become brittle and compromise it’s ability to protect the wearer. Once the red sensor turns completely white, it’s time for a replacement.

Item # Style Color H801V Standard WhiteH802V Standard YellowH803V Standard BlueH804V Standard GreenH805V Standard RedH806V Standard OrangeH807V Standard Hi-Viz OrangeH808V Standard GrayH809V Standard Hi-Viz YellowH810V Standard Navy BlueH811V Standard Tan

Item # Style Color H801VUV Uvicator™ WhiteH802VUV Uvicator™ YellowH803VUV Uvicator™ BlueH804VUV Uvicator™ GreenH805VUV Uvicator™ RedH806VUV Uvicator™ OrangeH807VUV Uvicator™ Hi-Viz OrangeH808VUV Uvicator™ GrayH809VUV Uvicator™ Hi-Viz YellowH810VUV Uvicator™ Navy BlueH811VUV Uvicator™ Tan

Hard Hat SafetyAt DiVal Safety Equipment, our top priority is keeping our customers safe. Part of that responsibility involves informing customers about the differences between our products. In this instance, we wouldlike to explain some of the safety features available in our hard hats. Use of the proper ANSI-compliant head protection is required by OSHA and can help prevent injuries.

ANSI/ISEA Z89.1 standards indicate two types of head protection: Type I: Protects against blows to the top of the head. Type II: Protects against blows to the top of the head and sides of the head.

ANSI standards also indicate three classes of head protection: Class E (Electrical): tested to withstand 20,000 voltsClass G (General): tested to withstand 2,200 voltsClass C (Conductive): do not provide any protection from electricity.

Suspensions: Hard hats are available inthree different types of suspensions. Ratchet Suspension:Adjusts by turning a knob at the rear or the hard hat. Pinlock Suspension:Adjusts by taking off the hat and matching a pin into a corresponding hole. 1-Touch Suspension:Adjusts by squeezing and separating suspension to best fit

Determining the right suspension is essential in optimizing worker comfort. Suspensions areavailable in 4, 6, or 8 points. The more points, the better the distribution of the impact force.

Hard Hats should be replaced anytime they show signs of wear such as cracks, chips,holes, dents or brittleness. Suspensions should be replaced annually or when they showsigns of wear such as cracks, tears, or loss of pliability.

Never interchange one manufacturers hard hat with another’s suspension.

Uvicator™ progression chart and additional Uvicator™ products and info on back cover of this catalog.

Hard Hats

3M™ H-800 Series full brim hard hat with 4 point ratchet suspension provides lightweight protection, comfort, durability, balance and stability. Features include ratchet suspension, replaceable brow pad, short brim for better visibility, and slots for accessory attachment. Ideal for use in mining, construction work, forestry, oil and gas, road construction, and heavy and light industrial applications. Meets ANSI/ISEA Z89.1-2009 Type I, Class C (Not Class E or G).

#H801V

#H804V

#H803VUV

#H809VUV

Fas-Trac Staz-OnColor Item # Item #Fluorescent Green 815565 815558Orange 475361 463945Purple 495858 488398Red 475363 463947Silver 495855 484340White 475358 463942Hi-Viz Yellow 475360 463944Navy Gray n/a 463948Robin's Egg Blue n/a 463111Tan n/a 461180

Customize hard hats with your logo or personalized message. • To begin, select your hard hat style and color• Choose where on the hard hat you’d like your logo printed• Determine the quantity of hard hats you need (minimum of 20, with additional quantities in multiples of 20)• Choose from 4 imprint locations and up to 4 separate colors• Email your logo in vector artwork with a file extension o .eps, .jpg, .ai, or .pdf to [email protected]• Approve the proof of your logoed hard hat

MSA LogoExpress Service

• Receive your custom imprinted hard hats• Printing costs are added to the base price of each hard hat• A one-time setup charge applies on first t me orders• Most printers can provide details for obtaining electronic files of your log• When printing light colors, a light color hard hat is recommended, darker hard hat colors may show through ink• Ink colors may vary when printed on different hard hat colors• The logo is reduced or enlarged to the maximum size allowable, with the lowest print location stopping 1/2” above the brim• Maximum area for imprinting varies with the shape and style of the imprint location on the hard hat


Hard Hats

Item # Color10021292 Hi-Viz Orange10061515* Hi-Viz Ylw/Grn475366* Yellow475367 Gray475368* Blue475369* White475370* Green475371 Red496075 Orange802975 Dark Blue

Fas-Trac Staz-OnColor Item # Item #Black 492559 n/aBlue 475359 463943Brown 495854 464658Gold 475365 464852Gray 475364 n/aGreen 475362 463946Light Blue 495853 478237Light Buff 495856 n/aNeon Green 10061512 n/aHi-Viz Orange 488146 488148

Item #473332 Fas-Trac® RatchetItem #462628 Staz-On® Pin LockItem #10061123 1-Touch Slide

MSA V-Gard® Slotted Full Brim Hard HatThese hard hats have a lightweight high-density poly-ethylene shell that provides superior impact protection. The Fas-Trac® ratchet suspension and self adjusting crown straps ensures a comfortable fit Slotted and meets or exceeds requirements for ANSI/ISEA Z89.1, Type I, Class E helmets. Cer tified by SEI

* Non-Slotted Hats Available While Supplies Last.

MSA V-Gard Slotted CapsThese hard hats have a lightweight polyethylene shell that provides superior impact protection. Available with Fas-Trac® ratchet suspension or Staz-On® pinlock suspen-sion. The self adjusting crown straps ensure a comfortable fit. Slotted sides allow awide variety of MSA accessories including face shields and ear muffs to be attached. Meets or exceeds ANSI/ISEA Z89.1 standards for Type 1 (top impact), Class E helmets. Cer tified by SEI Fas-Trac® Staz-On®

$7.15

$10.70$12.20

$8.40$11.90$17.50

MSA SuspensionsFeatures a 4-point suspension with ratchet, pinlock or sliding closure, and includes a perforated vinyl sweatband for a comfortable fit. Its standardsized webbed suspension fits most sized heads. No metalparts. Can be used with V-Gard® hard hats and full brim hard hats. Sold by the each. 50 per case

Bullard® C30 Classic Pinlock Hard HatBullard® Classic Series C30 hard hat with pinlock suspen-sion. Features a high density polypropylene (HDPE) shell with wide brim and full profile design. Accessory slotted sides for added attachments such as earmuffs, faceshields, and chin straps. Adjustable self sizing 6 point suspension with larger, absorbent cotton brow pad. Meets ANSI/ISEA Z89.1-2009, Type I, Class E and G, and CSA Z94.1-2005, Type I, Class E and G requirements for head protection. Sold by the each. 20 per case.

Bullard® C30 Classic Ratchet Hard HatBullard® Classic Series C30 hard hat with ratchet suspen-sion. Features a high density polypropylene (HDPE) shell with wide brim and full profile design. Accessory slotted sides for added attachments such as earmuffs, faceshields, and chin straps. Adjustable 6 point Flex-Gear® ratchet suspension with large, absorbent cotton brow pad. Meets ANSI/ISEA Z89.1-2009, Type I, Class E and G, and CSA Z94.1-2005, Type I, Class E and G requirements for head protection. Sold by the each. 20 per case.

Bullard® S51R Ratchet Hard HatBullard® Standard Series S51 hard hat with ratchet suspen-sion. Features a high density polypropylene (HDPE) shell with flat front and low profile design. Rain trough brim and acc -sory slotted sides for added attachments such as earmuffs, faceshields and chin straps. Adjustable 4 point Flex-Gear® ratchet suspension with poly brow pad for a comfortable, se-cure fit. Meets ANSI/ISEA Z89.1-2009, Type I, Class E and G, and CSA Z94.1-2005, Type I, Class E and G requirements for head protection. Sold by the each. 20 per case.

Bullard® S51 Pinlock Hard HatBullard® Standard Series S51 hard hat with pinlock suspen-sion. Features a high density polypropylene (HDPE) shell with flat front and low profile design. Rain trough brim and accesso slotted sides for added attachments such as earmuffs, facesh-ields and chin straps. Adjustable 4 point self adjusting pinlock suspension with poly brow pad for a comfortable, secure fit.Meets ANSI/ISEA Z89.1-2009, Type I, Class E and G, and CSA Z94.1-2005, Type I, Class E and G requirements for head pro-tection. Sold by the each. 20 per case.


Hard Hats

Item # Color5100YE Yellow5100GR Kelly Green5100TA Tan5100LG Gull Gray5100PI Light Pink

Item # Color5100RBLK Black5100RPI Pink5100RRE Red5100RTA Tan5100RYE Yellow

Item # Color5100BL Kentucky Blue5100BLK Black5100HVOR Hi-Viz Orange5100OR Orange5100RE Red5100WH WhiteRS4PP Replacement Pinlock Suspension

Item # Color5100RHVOR Hi-Viz Orange5100ROR Orange5100RWH White5100RBL Kentucky Blue5100RGR Kelly GreenRS4RC Replacement Ratchet Suspension

Item # Color30BKP Black30CBP Chocolate Brown30DGP Dove Gray30FGP Forest Green30GGP Gull Gray30HGP High-Viz Green30HOP High-Viz Orange30HYP High-Viz Yellow30KBP Kentucky Blue30KGP Kelly GreenRS6PC Replacement Pinlock Suspension

Item # Color30LPP Light Pink30NBP Navy Blue30ORP Orange30PBP Pacific Blu30RDP Red30SKP Sky Blue30SLP Slate Blue30TNP Tan30WHP White30YLP Yellow

Item # Color30BKR Black30CBR Chocolate Brown30DGR Dove Gray30FGR Forest Green30GGR Gull Gray30HGR High-Viz Green30HOR High-Viz Orange30HYR High-Viz Yellow30KBR Kentucky Blue30KGR Kelly GreenRS6RC Replacement Ratchet Suspension

Item # Color30LPR Light Pink30NBR Navy Blue30ORR Orange30PBR Pacific Blu30RDR Red30SKR Sky Blue30SLR Slate Blue30TNR Tan30WHR White30YLR Yellow

$13.25

$16.50

$7.75

$10.90

$9.75$6.95

$9.20$4.80

©2014 H-D. All rights reserved. Manufactured by Honeywell Safety Products under license fromHarley-Davidson Motor Company.

Harley-Davidson® Orange Skull Hard HatOrange metallic flames and razor sharpblades surround metallic skulls on the front and back of this high-gloss hard hat. Clas-sic Harley-Davidson® Bar and Shield logo decal on the front. Smooth thermoplastic crown shell design with easily adjust-able 8 point ratchet suspension for a secure and comfortable fit. Breathableand washable cushioned sweatband provides increased comfort. Meets ANSI Z89.1-2010 standards for head protection. Sold by the each. 10 per case.

$39.50HD30

Syracuse University NCAA Hard HatOfficially licensed Syracuse Univers -ty NCAA hard hat for the diehard fan. Molded from high density polyethylene for maximum protection and comfort. Fea-tures a sleek, ribbed and well balanced low profile design with slotted sides andrain through to accomodate a variety of accessories such as earmuffs, facesh-ields and chin straps. Easily adjustable 6 point pin lock dielectric nylon suspension for a secure, comfort-able fit. OSH certified and meets ANSI Z89 Type 1, Class C, E, and G requirements for head protection. Sold by the each.

$36.00HHSYRACUSE


Item #

Item # Item #

Item #

Item #

Specialty Hard Hats

Item #E1RWUSA Full Brim Hard HatItem #E2RWUSA Standard Hard Hat

“The Peak” A79 Ratchet Hard Hat, PinkNorth® “The Peak” hard hat, pink. Features a versatile, de-pendable, design with a grooved HDPE (High Density Polyeth-ylene) rain trough outer shell that provides outstanding head protection. Slotted sides and anchor points will accomodate other PPE accessories such as earmuffs, chin straps and faceshields. Easily adjustable 4 point ratchet suspension for a secure comfortable fit. Completely dielectric. Meets andor exceeds ANSI Z89.1-2009, Type 1, Class E standards for top impact and electrical hazard protection. Extremely lightweight. Pink. Sold by the each. 20 per case.

$9.75A79RSPI

Harley-Davidson® Flames Hard HatHarley-Davidson® flames hardhat. Features a full graphic high gloss, fully customized black hard hat shell with realistic flame design and legen -ary Harley Davidson® Bar and Shield logo. Smooth thermoplastic crown shell design with easily adjustable 8 point ratchet suspension for a secure and comfortable fit. Breathable and was -able cushioned sweatband provides increased comfort. Meets ANSI Z89.1-2010 standards for head protection. Sold by the each. 10 per case.

$39.50HD10

V-Gard® Buffalo Bills NFL Hard Hat CapMSA V-Gard® Buffalo Bills NFL. Officially licensed hard hat with vi -id colors and exclusive team logo. Features a polyethylene shell with slotted sides to attach accessories such as earmuffs, faceshields, and chin straps. Easily adjustable One-Touch® Suspension for a secure comfortable fit. Sold by the each.20 per case.

$33.60818387 Item #

Fibre-Metal® Spirit of America Hard HatFibre-Metal “Spirit of America” Type 1 hard hat. Exclusive overlay design with both heat and scratch resistance. Smooth thermoplastic crown deflects impacting objects. Exclusiveeight-percent suspension disperses impact energy. Adjustable non-slip, non-strip ratchet headgear for ultimate comfort and fit.Full graphic design “Spirit of America” ratchet hard hat.

Harley-Davidson® Skulls Hard HatSleek, black matte hard hat fea-tures metallic silver flames, blades andskulls. Three-dimensional silver metal Bar and Shield logo emblem show-cased on the front of this special edition hard hat. Smooth thermoplastic crown shell design with easily adjustable 8 point ratchet suspension for a secure and comfortable fit. Breathable andwashable cushioned sweatband provides increased comfort. Meets ANSI Z89, Type 1, Class G and E standards for head protection. Sold by the each. 10 per case.

$39.50HD35S

$42.65$39.75



NBA Hard HatsOfficially licensed NB hard hat for the diehard fan. Molded from high density polyethylene for maximum protection and comfort. Features a sleek, ribbed and well balanced low profile designwith slotted sides and rain through to accomodate a variety of accessories such as earmuffs, face-shields and chin straps. Easily adjustable 6 point pin lock dielectric nylon suspension for a secure, comfortable fit. OSH certified and meets ANSI Z89 Type 1, Class C, E, and G requirements for head protection. Sold by the each.

Specialty Hard Hats

Item # TeamHH2685MT Minnesota TwinsHH2695NM New York MetsHH2705NY New York YankeesHH2815OA Oakland AthleticsHHPHILLIES Philadelphia PhilliesHHPIRATES Pittsburgh PiratesHHPADRES San Diego PadresHHWSGIANTS San Francisco Giants WSHHGIANTS San Francisco GiantsHHMARINERS Seattle MarinersHHCARDINALS St. Louis CardinalsHHRAYS Tampa Bay RaysHHRANGERS Texas RangersHHBLUEJAYS Toronto Blue JaysHHNATIONALS Washington Nationals

Item # TeamHH626NP Nashville PredatorsHHDEVILS New Jersey DevilsHH655NI New York IslandersHH630NR New York RangersHH676OS Ottawa SenatorsHHPF Philadelphia FlyersHHPENGUINS Pittsburgh PenguinsHHSJS San Jose SharksHHBLUES St. Louis BluesHHTBL Tampa Bay LightningHHML Toronto Maple LeafsHHCANUCKS Vancouver CanucksHHCAPITALS Washington CapitalsHHJETS Winnipeg Jets

Item # TeamHH1095MB Milwaukee BucksHHTIMBERWOLVES Minnesota TimberwolvesHHHORNETS New Orleans HornetsHH1035NK New York KnicksHHTHUNDER Oklahoma City ThunderHH1220OM Orlando MagicHH76ERS Philadelphia 76ersHHSUNS Phoenix SunsHHBLAZERS Portland Trail BlazersHHKINGS Sacramento KingsHHSPURS San Antonio SpursHHJAZZ Utah JazzHHWIZARDS Washington Wizards

NHL Hard Hats

MLB Hard Hats

NBA Hard Hats


Item # TeamHH2626AA Anaheim AngelsHH2601AD Arizona DiamondbacksHHBRAVES Atlanta BravesHH2615BO Baltimore OriolesHHWSRDSOX Boston Red SoxHH2635CC Chicago CubsHH2646CW Chicago White SoxHH2655CR Cincinnati RedsHH2775CI Cleveland IndiansHH101CR Colorado RockiesHH2805DT Detroit TigersHH2757FM Miami MarlinHH2665HA Houston AstrosHH2825KC Kansas City RoyalsHH2675LA Los Angeles DodgersHH2835MB Milwaukee Brewers

Item # TeamHH641AD Anaheim DucksHH695BB Boston BruinsHH685BS Buffalo SabresHH625CF Calgary FlamesHH633CH Carolina HurricanesHH645CB Chicago BlackhawksHH117CA Colorado AvalancheHHBLUEJACKETS Columbus Blue JacketsHH671DS Dallas StarsHHDRW Detroit Red WingsHH105EO Edmonton OilersHH642FP Florida PanthersHH640LA Los Angeles KingsHHWILD Minnesota WildHH710MC Montreal Canadiens

Item # TeamHHHAWKS Atlanta HawksHH1010BC Boston CelticsHHBOBCATS Charlotte BobcatsHH1060CB Chicago BullsHH1020CC Cleveland CavaliersHH1230DM Dallas MavericksHHNUGGETS Denver NuggetsHHPISTONS Detroit PistonsHH1025HR Houston RocketsHH1080IP Indiana PacersHH1015LA Los Angeles ClippersHH1090LA Los Angeles LakersHHGRIZZLIES Memphis GrizzliesHH1205MH Miami Heat

MLB Hard HatsOfficially licensed MLB hard hat for the diehard fan.Molded from high density polyethylene for maximum protection and comfort. Features a sleek, ribbed and well balanced low profile design with slotted sides andrain through to accomodate a variety of accessories such as earmuffs, faceshields and chin straps. Easily adjustable 6 point pin lock dielectric nylon suspension for a secure, comfortable fit. OSH certified and meetsANSI Z89 Type 1, Class C, E, and G requirements for head protection. Sold by the each.

NHL Hard HatsOfficially licensed NH hard hat for the diehard fan. Molded from high density polyethylene for maximum protection and comfort. Features a sleek, ribbed and well balanced low profile design with slotted sides andrain through to accomodate a variety of accessories such as earmuffs, faceshields and chin straps. Easily adjustable 6 point pin lock dielectric nylon suspension for a secure, comfortable fit. OSH certified and meetsANSI Z89 Type 1, Class C, E, and G requirements for head protection. Sold by the each.

$36.00

$36.00

$36.00

NCAA Hard HatsOfficially licensed NCA hard hat for the diehard fan. Molded from high density poly-ethylene for maximum protection and comfort. Features a sleek, ribbed and well balanced low profile design with slotted sides and rainthrough to accomodate a variety of accessories such as earmuffs, faceshields and chin straps. Easily adjustable 6 point pin lock dielectric nylon suspension for a secure, comfortable fit. OSH certified and meets ANSI Z89 Type 1, Class C, E, and G requirements for head protection. Sold by the each.

Item # Team818399 Miami Dolphins818400 Minnesota Vikings818401 New England Patriots818402 New Orleans Saints818403 New York Giants818404 New York Jets818405 Oakland Raiders818406 Philadelphia Eagles818407 Pittsburgh Steelers818408 San Diego Chargers818409 San Francisco 49ers818410 Seattle Seahawks818411 St. Louis Rams818412 Tampa Bay Bucs818413 Tennessee Titans818414 Washington Redskins

Item # SchoolHH475LS LSU TigersHHMIAMI Miami HurricanesHH545MW Michigan WolverinesHH530MG Minnesota Golden GophersHH820MS Mississippi State BulldogsHH941MG Montana GrizzliesHH790NA NAVYHH590NC Nebraska CornhuskersHHNCAROLINA North Carolina Tar HeelsHH460ND Notre Dame Fighting IrishHH935OB Ohio BobcatsHH540OS Ohio State BuckeyesHH555OS Oklahoma SoonersHH575OC Oklahoma State CowboysHH850OR Oregon DucksHH465PS Penn State LionsHHPITTSBURGH Pittsburgh PanthersHHSTANFORD Stanford CardinalsHHSYRACUSE Syracuse OrangemenHHTENNESSE Tennessee VolunteersHHTEXAS Texas LonghornsHHSCALIFORNIA USC Trojans

NCAA Hard Hat


Specialty Hard Hats

Item # DriverHHEDWARDS1 Carl Edwards2479681 Dale Earnhardt Jr. (Green)2479641 Dale Earnhardt Jr. (Black)HH814DE Dale Earnhardt HHHAMLIN Denny HamlinHHLOGANO Joey LoganoHHKB Kyle Busch HHNASCAR NASCAR Hard Hat

Item # Team818384 Arizona Cardinals818385 Atlanta Falcons818386 Baltimore Ravens818387 Buffalo Bills818388 Carolina Panthers818389 Chicago Bears818390 Cincinnati Bengals818391 Cleveland Browns818392 Dallas Cowboys818393 Denver Broncos818394 Detroit Lions818395 Green Bay Packers10031348 Houston Texans818396 Indianapolis Colts818397 Jacksonville Jaguars818398 Kansas City Chiefs

Item # School HHALABAMA Alabama Crimson TideHH830AS Arizona State Sun DevilsHH835AW Arizona Wildcats HH785AR ARMY HHAUBURN Auburn Tigers HH805BY BYU Cougars HH810CT Clemson Tigers HH565CB Colorado Buffaloes HH865CS Colorado State RamsHH979CH Connecticut Huskies HH735DB Duke Blue Devils HH885EC East Carolina PiratesHH510FG Florida Gators HH505FS Florida State SeminolesHH470GB Georgia Bulldogs HH730GT Georgia Tech HH525IO Iowa Hawkeyes HH585IS Iowa State CyclonesHH570KJ Kansas Jayhawks HH580KS Kansas State WildcatsHH495KW Kentucky Wildcats HH855LC Louisville Cardinals

NASCAR Hard HatsOfficially licensed NASCAR hard hat for the diehard fan. Moldedfrom high density polyethylene for maximum protection and comfort. Features a sleek, ribbed and well balanced low profiledesign with slotted sides and rain through to accommodate a variety of accessories such as earmuffs, faceshields and chin straps. Easily adjustable 6 point pin lock dielectric nylon sus-pension for a secure, comfortable fit. OSH certified and meetsANSI Z89 Type 1, Class C, E, and G requirements for head protection. Sold by the each.

NFL Hard HatsMSA V-Gard® NFL hard hat cap. Officially licensed hard hat wit vivid colors and exclusive thermoform team logo. Features a poly-ethylene shell with slotted sides to attach MSA accessories such as earmuffs, faceshields, and chin straps. Easily adjustable One-Touch® Suspension for a secure comfortable fit. Meets ANSI/ISEA Z89.1, Type 1, Class E requirements for head protection. Cer tified by SEI. Sold by the each. 20 per case

$36.00

$36.00

$33.60

Item # ColorE2RWOR OrangeE2RWRE RedE2RWTA TanE2RWWH WhiteE2RWYE Yellow Item # Color

P2ARWRE RedP2ARWTA TanP2ARWWH WhiteP2ARWYE Yellow


Hard Hats

Item # ColorE2RWBL BlueE2RWBLK BlackE2RWGR GreenE2RWGY GrayE2RWHVOR Hi-Viz Orange Item # Color

P2ARWBK BlackP2ARWBL BlueP2ARWGR GreenP2ARWGY GrayP2ARWOR Hi-Viz Orange

Item # ColorA79RSBE TanA79RSBL BlueA79RSBLK BlackA79RSBU BurgundyA79RSGR Dark GreenA79RSGY GrayA79RSHVRE Hi-Viz RedA79RSLB Light Blue

Item # ColorA79RSNB Navy BlueA79RSOR OrangeA79RSPI PinkA79RSRE RedA79RSSB Sky BlueA79RSWH WhiteA79RSYE Yellow

Item # ColorE2SWWH WhiteE2SWYE YellowE2SWBL Blue

Item # ColorE2SWGR GreenE2SWOR OrangeE2SWRE Red

Fibre-Metal® E2 Hard Hat with Ratchet SuspensionFibre-Metal® E2RW Cap Style Hard Hat. Features a thermoplastic Cap Style shell design offering excellent impact protection and comfort. 8 point ratchet suspension is easily adjustable for a secure fit. Meets ANSI Z89.1-2009, Type 1, Class E requirements for head protection. Sold by the each. 20 per case.

Fibre-Metal® Roughneck P2A Hard HatFibre-Metal® Roughneck® P2A Hard Hat. Features a proprietary injection-molded fiberglass shell that is built forstrength, toughness and durability. Offers exceptional impact and crack resistance and is eight times stronger than com-mon HDPE (high density polyethylene) cap shells. Excellent heat resistance with protection up to 370° F. Solid color resin provides a permanent, no chip, no peel finish allowing forlong lasting wear. 8 point ratchet suspension is easily adjust-able for a secure comfortable fit. Meets ANSI Z89.1-2009, Type 1, Class G requirements for head protection. Sold by the each. 20 per case.

“The Peak” A79 Hard HatNorth® “The Peak” hard hat. Features a versatile, dependable, de-sign with a grooved HDPE (High Density Polyethylene) rain trough outer shell that provides outstanding head protection. Slotted sides and anchor points will accommodate other PPE accessories such as earmuffs, chin straps and faceshields. Easily adjustable 4 point ratchet suspension for a secure comfortable fit. Complete y dielectric. Meets and/or exceeds ANSI Z89.1-2009 Type 1 Class E standards for top impact and electrical hazard protection. Extremely lightweight. Sold by the each. 20 per case.

Fibre-Metal® SuperEight® Swingstrap® CapsFibre-Metal® E2SW Cap Style Hard Hat. Features a thermoplastic Cap Style shell design offering excellent impact protection and comfort. 8 point swing strap ratchet suspension is easily adjustable and allows you to wear the hard hat forwards and backwards. Meets ANSI Z89.1-2009, Type 1, Class E requirements for head protection. Sold by the each. 20 per case.

$29.10

$17.50

$9.75

$21.75

Vanguard™ Type II Hard HatsMSA Vanguard™ Type II hard hat with Fas-Trac™ ratchet sus-pension. These comfortable, lightweight hard hats are designed to provide impact protection in the event of a top or lateral blow to the head. Features the integrated Fas-Trac™ ratchet suspen-sion with foam liner and self adjusting crown straps to ensure a secure, comfortable fit. Slo -ted sides allow a wide variety of MSA accessories such as faceshields, earmuffs and chin straps to be attached. Meets Type II requirements for ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E). Certified by SEI. Sold by theeach. 6 per case.

BC86 Bump CapsNorth’s® low haz-ard BC86 bump cap. Seamless, one piece construction with a high density polyethylene shell and injection moulding. Provides great protection against minor bumps, scrapes and cuts. Ideal for work environments that DO NOT require ANSI hard hat protec-tion. Well ventilated, light-weight and extremely durable. Close-fitting 4 point pinlocksuspension allows for total wearer comfort. Sold by the each. 20 per case.

Item #

Item # ColorHP40010 WhiteHP40012 GrayHP40020 Red HP40030 YellowHP40035 GreenHP40040 OrangeHP40060 Blue

Item # Color67GR Green67GRY Gray 67OR Orange

Item # Color67RE Red67WH White67YE Yellow

Item # Color804940 White804939 Yellow804944 Red804947 HV Orange804946 Blue804631 Suspension

Item # Color86BL Blue86GR Green86NVY Navy86WH White86RE Red86YE Yellow86OR Orange86S Suspension

Item # ColorSBC2WE White SBC2BE Blue SBC2BK BlackSBC2KI Khaki SBC2RD RedItem # Color

67BE Beige67BL Blue67BLK Black

Ridgeline HP40 Series Bump CapPyramex™ Ridgeline HP40 series bump cap. These bump caps are constructed from a light weight, HDPE plastic with all new air holes on both sides for great ventilation. Provides protection for low-risk work envi-ronments involving minor bumps and scalp lacerations. Easy to adjust 4 point standard ratch-et suspension with brow pad. These bump caps do NOT meet the ANSI Z89.1-1997 class C, G and E standards. Sold by the each. 64 per case.

ERB Bump CapERB Bump Cap. Ideal for protection from lacerations, minor bumps and bruises in areas that do not require certifiedsafety helmets. 4-point injection molded polyethylene. Standard size 6-1/2 to 7-3/4.

Convert-A-Cap Protective Shell Cap Insert, WhiteNorth’s® Convert-A-Cap pro-tective shell insert for baseball caps. These inserts can turn any baseball cap into a piece of protective headgear offering a mild form of head protection. Ideal for applications such as mechanics, muffler shops, golfcourse personnel, truck drivers, oil change centers and maintenance departments. Durable and extremely light-weight. Sold by the each. 72 per case.

$2.75SC01

Fibre-Metal® Homerun® Baseball Style Bump CapFibre-Metal® Homerun® baseball style bump cap. Lightweight, dis-tinctive American style baseball cap design that provides protec-tion from minor lacerations, abra-sions and bruises. Features a sturdy 100% brushed cotton feel with cooling ventilation eyelets that permit great air circulation. A unique high strength thermoplas-tic protective inner liner with an inner surface soft foam comfort brow pad. Easily adjustable back straps for secure fit. Meets CEbump cap standard EN 812/AI. Not ANSI approved. Sold by the each. 10 per case.


Type II Hard Hats, Bump Caps & Accessories

#459458 #449895

$15.75$16.75

$14.75

$54.00

$4.05

$4.25

$4.15

Item #459458 For MSA CapsItem #449895 For MSA Full Brim Hats

Rubber Goggle Retainers For Caps and Full Brim HelmetsMSA goggle retainers offer a secure hold. Specially designed for use with MSA goggles and caps / hard hats. Easy to install, no tools necessary. Easily adjustable for a more comfortable fit. Black.


Acrylic Knit Face MaskThis acrylic knit face mask features a tight fitting three hole design that helpsprotect from wind and cold. Great to wear in outdoor applications. Full face and neck coverage. Soft. Lightweight.

Thin + Thirsty™ Disposable SweatbandOccuNomix Sponge Sweat-band. These cooling, ab-sorbent, dry sponge sweat-bands provide cooling relief. Simply dip in cold water to soften, squeeze out excess water and wear. Affixes withheavy duty rubber band for secure fit. Universal size.Traditional sponge sweat-band. Blue. 100 per pack. $0.42KE

AA-102 Clip On Dry Brow SweatbandsAA-102 Clip On Dry brow sweatbands. These deluxe disposable headbands pro-vide cooling relief for workers in hot, and sweaty envi-ronments. They can attach to safety helmets, welding helmets, or sandblast hood suspensions. They measure 8 5/8” x 1 3/4” and come 25 per bag. Clip on dry brow sweatband.

$0.68AA102

TerryToppers® Hard Hat SweatbandOccuNomix Terrycloth Hard Hat Sweatband. These comfort-able terrycloth sweatbands are plush, not scratchy. It will cater to your needs, wicking sweat. Machine washable. Its universal size easily attaches to hard hat suspensions with snaps. Beige. Terrycloth hard hat sweatband. 100 per pack.

$2.20TSB Item #Item #/EA

/PK

Item #

Item #Item #REF1X4YE YellowItem #REF1X4WH White

Item #6280BLK BlackItem #6280NVY Navy

Item #LF648 Navy Item #LF649 Camo

Item #A161BLK BlackItem #A161BRN Brown

Item #9652006 BlackItem #991982 Green

Hard Hat Reflective Strips, 1” x 4”These reflective strips are anadd on decal that provides excellent high visibility for night workers. Can easily be placed on all sides of your helmet. Simple, effective and economical. 1” x 4” in size. Sold by the pack. 16 per pack.

/EA/EA

Heavyweight Full Face Winter LinersOccuNomix full face helmet liner. This 100% super heavyweight polyester fleece is single layeredand is shoulder length. It features a mesh mouth and nose opening. One size fits most

Carhartt Acrylic Knit Face MaskCarhartt 100% acrylic, stretchable rib-knit fabric full face mask. Single face opening. Thinsulate Flex 40g insulation for increased warmth. One size fits all

Woolpower® Balaclava Ski MasksThe Woolpower® 200g/m² balaclava ski mask is made from Ullfrotté original fabric, a Merino wool blend. The unique construction of inner facing terry loops creates a warm insulating layer, yet efficiently wicks moisture away from the face.Machine washable and dryer safe. Versatile face opening allows for multiple configurations.Available in Black and Green.

MAXIT Hothead® Face Mask, BlackThe MAXIT Hothead® completely blocks out the cold and wind, yet it is breathable, highly stretchable and provides superior moisture wicking to help prevent chill and overheating. It’s the warmest balaclava available and it fits comfortably under any hator helmet. It also folds to pocket size. Black, one size. Made in the USA.

$18.50101919409

Helmet Liners & Accessories

$7.99$7.99

$7.99$8.99

$14.99$14.99

$38.00$38.00

$14.10

WhileSupplies

Last

Sherpa Lined 375 Winterliner

$7.20PL94

$4.95PL95

Quilted Fleece 200 Winterliner

$4.95PL40Item # Item #Item #

Item #Item #Item # Item #

Item #$21.45

3005354

$12.10PL75

Heavyweight Fleece 225 Plus Winterliner

$3.50PL50

Economical 165 Winterliner, WhiteJackson Safety™ economy hel-met liner. Lightweight protection that can be worn under caps and hard hats. 100% cotton with a napped flannel lining. Two strong ties for a secure, snug fit. Machine washable. Econ -my helmet liner. Sold by the each.

$1.99PL20

$21.50101Item #

Item #Item #Item #

Item # Item #


Helmet Liners & Hats

Item #

AA-7 WINDGARD™ Head ProtectionWINDGARD™ AA-7, keeps wind out, traps warmth and prevents moisture build-up. Knitted flame r -sistant treated spun polyester meets 16 CFR 1610, Class 1. Orange hi-visibility. De-signed to fit ove most hard hats.

$4.90KB1

Deluxe 400 Winterliner

$9.95PL90

AA-9 WINDGARD™ Head ProtectionWINDGARD™ AA-9, keeps wind out, traps warmth and prevents moisture build-up. Knitted flameresistant treated spun polyester meets 16 CFR 1610, Class 1. Full-face and neck cap and hat style.

$8.8522223

$27.25227

High-Visibility Fleece Caps

$27.25145122

Heavyweight 100% acrylic knit cap. Cuffed style design. Great for added head and ear coverage in colder conditions. One size fits most. Orange

$3.701501KCFO

Item #3014360HiViz OrangeItem #3014361HiViz Lime

FlashTex® Nomex® 650 NPR WinterlinerIdeal for cold-weather conditions. Outer shell: Retains FR protec-tion throughout life of product - 100% Nomex® IIIA. Inner shell: Flame resistance through 25 industrial washes or 50 domestic washes. 100% Proban® cotton.

Medium protection that can be worn under caps and hard hats. Hook-and-loop fastener. Water-resistant material. Poly-ester fleece lining and meets 1 CFR 1610, Class 1. Machine washable.

Can be worn under caps and hats. Hook-and-loop fastener. Cotton twill outer shell with polyester fleece lining. Meets16 CFR 1610, Class 1.Machine washable.

Ideal for cold weather environ-ments, this liner has a long nape that allows for extra neck cover-age from wind. 100% cotton, den-im twill shell with Sherpa lining for maximum warmth. Velcro® strap closure. Meets 16 CFR 1610, Class 1. Machine washable.

Two piece cotton twill hard hat liner with flame resistant fleece linin Two piece construction for com-plete flexibilit . Bottom attaches to top with Velcro® fasteners for full head, neck and ear protection. Two leather suspension tabs. Chin strap with Velcro® closure.

Features a durable Flame retar-dant six ounce red Nomex® twill outer shell with ten ounce navy polyester fleece inner lining fo warmth. Three leather suspen-sion straps fits most hard hats Arc Rating 4.5 cal/cm2, providing HRC Level 1 protection.

Two Piece Cotton FR Helmet Liner

Double Layer Nomex® HoodPAC IA style hood. Compliant to NFPA 70E - for electric Arc Flash and NFPA 1971 for Structural Fire-fighters. Cal rating(10.1 cal), HazardRisk Category Level (HRC2).

Made with a Nomex® and Lenzing flame retardant blend Designed to protect from heatand flames while pr -viding warmth in colder conditions. Meets or exceeds OSHA and NFPA requirements. 10 cal/cm2 arc rating for HRC level 2 protection.

Double Layer Nomex® Hood

Economical Nomex® HoodProvides outstanding heat and flame resistance, and can b worn under face mask for added protection in the front and back of head and neck. 1 ply stretch Nomex® hood with 1 ply bib. Half face opening. Launderable.

Ideal for extreme cold weather environments. Full head and neck coverage with extra-long nape and wrap-around collar. Shoulder length that can be tucked into jackets. Meets 16 CFR 1610, Class 1.

This cap features a 1/2” wide super bright silver retro reflective tape and the flee fabric offers a soft touch with addi-tional warmth. Machine washable. Does not meet ANSI/ISEA Z107-2004 Standards.

Heavyweight Acrylic Knit Cap

$21.9530FVNO

Flame Retardant Fleece Helmet Liner

$8.99

$8.99

Heavy Fleece Knit250M Winterliner

Jackson Safety™ quilted fleecehelmet liner. Medium protection that can be worn under caps and hard hats. Hook-and-loop fas-tener for a comfortable, close fit.Cotton twill shell with polyester fleece lining. Meet16 CFR 1610 Class 1 Standards.

3M™ H-700 Series w/ Ratchet Suspension3M H-700 Series hard hat with ratchet suspension provides lightweight protection, comfort, durability, balance and stability. Features include ratchet sus-pension, replaceable brow pad, short brim for better visibility, and slots for accessory attachment. Ideal for use in mining, construction work, forestry, oil and gas, road construction, and heavy and light industrial appli-cations. Meets ANSI/ISEA Z89.1-2009 Type I, Class C, G, and E. Vented versions meet Type I, Class C only.

PRST STDUS POSTAGE

PAIDBuffalo, NY

Permit No. 11991721 Niagara St. Buffalo, New York 14207

REPLACE

NEW

WORN

Uvicator Sensor Shows Hard Hat Status

Vented -

Phone 716.874.9060 Toll Free 800.343.1354 Fax 716.874.4686 DiValSafety.com

IMPORTANT: The 3M products in this catalog must be used in accordance with OSHA regulations, and the user instructions, warnings, and limitations accompanying each product.

Item # Style ColorH701RUV Standard WhiteH702RUV Standard YellowH703RUV Standard BlueH704RUV Standard GreenH709RUV Standard Bright Yellow

Item # Style ColorH701VUV Vented WhiteH702VUV Vented YellowH703VUV Vented BlueH704VUV Vented GreenH701RS4 Replacement Suspension

Item # Style ColorH701R Standard WhiteH702R Standard YellowH703R Standard BlueH704R Standard GreenH705R Standard RedH706R Standard OrangeH707R Standard Bright OrangeH708R Standard GrayH709R Standard Bright YellowH710R Standard Navy Blue

Item # Style ColorH701V Vented WhiteH702V Vented YellowH703V Vented BlueH704V Vented GreenH701RS4 Replacement Suspension

3M™ H-700 Series w/ Uvicator™ Sensor3M H-700 Series hard hat with ratchet suspension and Uvicator™ sensor provides light-weight protection and comfort, in addition to durability. Uvicator™ sensor monitors the hat’s exposure to sun (UV light), which can cause the hard hat shell to become brittle and com-promise it’s ability to protect the wearer. Once the red sensor turns completely white, it’s time for a replacement. Features include UV sensor, ratchet suspension, replaceable brow pad, optional 6-point strap, short brim for better visibility, and slots for accessory attachment. Ideal for use in mining, construction work, forestry, oil and gas, road construction, and heavy and light industrial applications. Non-vented versions meet ANSI/ISEA Z89.1-2009 Type I, Class C, G, and E. Vented versions meet Type I, Class C only.

Standard -

$14.95

$12.25 $12.95

Eye and Head Protection Catalog - DiVal Safety and Head Protection/a… · Uvex Bionic® Shield...

Documents

Transcript of Eye and Head Protection Catalog - DiVal Safety and Head Protection/a… · Uvex Bionic® Shield...