Extrusion Weld Parameters Rev 1
1
WELDING SEAM PARAMETERS REPORT Project Name: DOC. CONTROL NUMBER: Location Site Supervisor Area Number Sheet No. Type of Materials Q.A. Sheet Thickness Seam Number Machine Type of Seam Time of Weld Date of Weld Ambient Temp (˚C) Hot Air Temp (˚C) Extrudate Temp (˚C) Speed (m/min) Welder Initials Note: ˅ - V SEAM ∟ - CORNER SEAM/AGLED SEAM Q.A. Signature & Date Welder Signature & Date ● All welding parameters are based on DVS 2207-part 3 TYPE OF SEAM
-
Upload
mark-kevin-bechayda -
Category
Documents
-
view
3 -
download
1
description
Extrusion Welding Parameter Forms
Transcript of Extrusion Weld Parameters Rev 1
WELDING SEAM PARAMETERS REPORT
Project Name: DOC. CONTROL NUMBER:
Location Site Supervisor
Area Number Sheet No. Type of Materials
Q.A. Sheet Thickness
Seam Number Machine Type of Seam Time of Weld Date of Weld Ambient Temp(˚C) Hot Air Temp (˚C) Extrudate Temp
(˚C) Speed (m/min) Welder Initials
Note:
˅ - V SEAM ∟ - CORNER SEAM/AGLED SEAM
Q.A. Signature & Date Welder Signature & Date
● All welding parameters are based onDVS 2207-part 3
TYPE OF SEAM
