External Report Created On 16 Jul 2020 08:38 - Airbus · 2020-07-16 · finish paints to an...

External Report Created On

© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.

02 Nov 2020 10:51

1/81

External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES

ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate

Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn

ess scope

Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date

134767 AERO COATINGGMBH

GEWERBEGEBIETREDENTIN

LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS

02 SurfaceTreatments

02-02 Shot Peening,surface

improvement,blasting, cold

expansion

Dry blasting 80-T-35-0200 Abrasive Blasting -Cleaning -

80-T-35-0200 Abrasive Blasting -Cleaning -

Yes QUALIFIED 14/11/2019 09:58:02 26/06/2019 23:30:46





02-04 Plating,coating, temporaryprotection, release

agents

Electrolytic cadmiumplating

80-T-35-1107 ChromiumPassivation of

Cadmium - PlatedSurfaces



Yes QUALIFIED WITHLIMITATIONS

14/11/2019 09:58:02 Limited To ChromiumPassivation of

Vacuum DepositedCadmium as per 80-T-35-4200. Limited

To ExtendedWorkbench Activities

(see AP2190.0 fordefinition).

05/05/2009 00:00:00






agents


80-T-35-4200 Vacuum Deposistionof Cadmium

80-T-35-4200 Vacuum Deposistionof Cadmium


14/11/2019 09:58:02 LIMITED TOEXTENDED

WORKBENCHACTIVITIES (SEE

AP2190.0 FORDEFINITION)

26/01/2008 00:00:00





02-05 Phosphating,chromate conversion,

passivation

Chemical conversioncoating

80-T-35-1101 Chromating ofAluminum andAluminum Alloy


Yes QUALIFIED 15/11/2019 11:51:29 11/11/2019 14:29:17




05 Paints, Coatings,Filler, Sealant

05-01 Primer Application of basicprimer

80-T-35-5002 Application despeintures primaires àdeux composants (à

base d'époxy)


base d'époxy)





1200.00 9000.00 3000.00 26/01/2008 00:00:00






80-T-35-5025 Coating with Two -component Primer

Chromate - free


Chromate - free





26/01/2008 00:00:00





05-02 Paints,coatings

Application of anti-static paints oncomposite parts

80-T-35-9120 Coating with Paintsand Varnishes,

General


General

Yes QUALIFIED 14/11/2019 09:58:03 26/06/2019 23:38:48






Application ofstructural paints

80-T-35-5106 Application depeinture de finition à

base depolyuréthane







26/01/2008 00:00:00




Non DestructiveTesting

Direct Reading Coating thicknessmeasurement

AITM6-6006 Mesure del¿épaisseur des

revêtements à l¿aided¿appareils

magnétiques et àcourants de Foucault

3 AITM6-6006 Mesure del¿épaisseur des



3 Yes QUALIFIED 14/11/2019 09:58:03 01/07/2019 14:23:15




TBD TBD Rinsing 80-T-35-0090 Rinsing 80-T-35-0090 Rinsing Yes QUALIFIED 15/11/2019 12:03:41 11/11/2019 14:32:56

135004 AEROSPACESURFACE

TREATMENTS LTD

FARROW ROAD CHELMSFORD CM1 3TH United Kingdom SURFACETREATMENTSPECIALISTS


02-01 Anodizing Chromic acidanodizing of

aluminium alloys

80-T-35-2100 Chromic AcidAnodizing

ABP1-1023 CHROMIC ACIDANODISING OF

ALUMINIUM

12 Yes QUALIFIED WITHLIMITATIONS

25/10/2016 15:06:33 PFA-153 27/09/2016 13:18:28


TREATMENTS LTD




aluminium alloys


ALUMINIUM

12 ABP1-1023 CHROMIC ACIDANODISING OF

ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTS LTD



02-01 Anodizing Sulphuric acidanodizing of

aluminium alloys

ABP1-1024 SULPHURIC ACIDANODISING OF

ALUMINIUM

4 ABP1-1024 SULPHURIC ACIDANODISING OF

ALUMINIUM

4 Yes QUALIFIED 24/03/2010 00:00:00 680.00 4840.00 1300.00 18/02/2010 00:00:00


TREATMENTS LTD



02-01 Anodizing Tartaric sulfuricanodising of

aluminium alloys forcorrosion protection

and paintpretreatment

AIPS02-01-003 Tartaric SulphuricAnodising of


and paintpretreatment.

3 AIPI02-01-003 Tartaric SulphuricAnodising of



A3 Yes QUALIFIED 13/03/2020 15:22:02 0.00 0.00 0.00 02/02/2012 00:00:00


TREATMENTS LTD





expansion

Dry blasting ABP1-2344 CLEANING ANDSURFACE

IMPROVEMENT BYBLASTING

4 ABP1-2344 CLEANING ANDSURFACE


4 Yes QUALIFIED 17/10/2018 16:08:00 18/02/2010 00:00:00


TREATMENTS LTD




passivation


ABP1-5057 CONVERSIONCOATING OFALUMINIUM

6 ABP1-5057 CONVERSIONCOATING OFALUMINIUM

6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTS LTD




passivation

Passivation ofCorrosion Resistant

Steel

AIPS02-05-005 Passivation ofCorrosion Resistant

Steel

2 AIPI02-05-005 Passivation ofCorrosion Resistant

Steel


2018-12-31 29/08/2018 17:27:44 without pickling 07/11/2017 13:25:24


TREATMENTS LTD




passivation

Passivation ofmartensitic and

austenitic stainlesssteel

80-T-35-1200 Passivieren vonNichtrostendenAustenitischen

Stählen


Stählen

Yes QUALIFIED 25/10/2016 15:06:33 20/05/2015 00:00:00


TREATMENTS LTD




passivation



80-T-35-1201 Passivation ofMartensitic Ferritic

Corrosion - ResistantSteel



Yes QUALIFIED 25/10/2016 15:06:33 750.00 1500.00 400.00 20/05/2015 00:00:00


TREATMENTS LTD




passivation



ABP1-5062 PASSIVATION OFSTEELS AND

NICKEL ALLOYS

4 ABP1-5062 PASSIVATION OFSTEELS AND

NICKEL ALLOYS

4 Yes QUALIFIED 24/03/2010 00:00:00 700.00 7200.00 3650.00 18/02/2010 00:00:00


TREATMENTS LTD





base d'époxy)


base d'époxy)


25/10/2016 15:06:33 ONLY 80 TMATERIALS TO BE

USED

20/05/2015 00:00:00


TREATMENTS LTD




ABP4-1123 APPLICATION OFCORROSION

INHIBITING PRIMERTO AN INTERNAL

OR EXTERNALSURFACE

26 ABP4-1123 APPLICATION OFCORROSION


OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTS LTD




Application ofexternal paint

systems

ABP4-2124 APPLICATION OFABRASION

RESISTANT PAINT

7 ABP4-2124 APPLICATION OFABRASION

RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTS LTD





systems

ABP4-2126 APPLICATION OFPOLYURETHANE

FINISH PAINTS TOAN INTERNAL OR

EXTERNALSURFACE

6 ABP4-2126 APPLICATION OFPOLYURETHANE


EXTERNALSURFACE

6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTS LTD





systems

ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME

INCORPORATING ACHROMATED

PRIMER TO ANEXTERNALSURFACE

18 ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME



18 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTS LTD





systems


PAINTS ANDVARNISHES FOR

OVERCOATING OFSEALANTS AND

PART MARKINGSAND FOR

IDENTIFICATIONPURPOSES






11 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTS LTD





systems


INCORPORATING ACHROMATE-FREE





8 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



02 Nov 2020 10:51

2/81




ess scope



TREATMENTS LTD





80-T-35-5030 Coating withTwo/Three-

component Water-based Primer





USED

1000.00 2400.00 1200.00 20/05/2015 00:00:00


TREATMENTS LTD











USED

20/05/2015 00:00:00


TREATMENTS LTD






component Water-based Top Coat





USED

20/05/2015 00:00:00


TREATMENTS LTD





ABP4-2130 APPLICATION OFFLEXIBLE FINISH

PAINT TO ANINTERNALSURFACE

16 ABP4-2130 APPLICATION OFFLEXIBLE FINISH


16 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTS LTD





AIPS05-02-009 Application ofstructural paints

5 AIPI05-02-009 Application ofstructural paints

A3 Yes QUALIFIED 25/10/2016 15:09:06 17/10/2011 00:00:00


TREATMENTS LTD




Rework of paints onmetallic and

nonmetallic structuralparts

AIPS05-02-011 Rework of paints onmetallic and non-metallic structural

parts

5 AIPI05-02-011 Rework of paints onmetallic and non-metallic structural

parts

2 Yes QUALIFIED 25/10/2016 15:09:06 17/10/2011 00:00:00


TREATMENTS LTD


09 Cleaning, De-oxidation, Pickling,Chemical Coating

09-02 Pickling Pickling of titaniumand its alloys

ABP8-2299 PICKLING OFTITANIUM ALLOYS

4 ABP8-2299 PICKLING OFTITANIUM ALLOYS

4 Yes QUALIFIED 04/10/2019 08:30:16 18/02/2010 00:00:00


TREATMENTS LTD



Direct Reading Determination ofelectrical conductivityof non-ferromagnetic

materials

ABP6-5224 TESTING OFALUMINIUMALLOYS BY

ELECTRICALCONDUCTIVITY

5 NA Yes QUALIFIED 04/07/2019 10:07:38 UK UK 18/02/2010 00:00:00


TREATMENTS LTD



Penetrant Penetrant testing ABP6-5230 TESTING BYPENETRANT FLAW

DETECTION



TREATMENTS LTD



Penetrant Penetrant testing AITM6-1001 Contrôle parressuage

12 AITM6-1001 Contrôle parressuage

12 Yes QUALIFIED 25/10/2016 15:09:06 AUDITED BY TONYWAR

AIRBUS LEVEL 3 13/05/2013 00:00:00


TREATMENTS LTD


TBD TBD DEOXIDATION OFALUMINIUM

ALLOYS

ABP8-1296 DEOXIDATION OFALUMINIUM

ALLOYS

7 NA Yes QUALIFIED 15/10/2019 16:07:26 19/12/2017 10:53:33


TREATMENTS LTD


TBD TBD Rinsing 80-T-35-0090 Rinsing 80-T-35-0090 Rinsing Yes AUTHORISATIONTO PROCEED

2020-12-31 13/03/2020 11:36:06 14/12/2018 13:48:14

138023 APS RUE DE LA MAREBLANCHE

MARNE LA VALLEECEDEX 2

77448 France SURFACETREATMENTSPECIALISTS


02-03 Deposition Application ofthermal spray

coatings WC-CoandWC-Co-Cr

ADET0098 Rilsanisation desalliages d aluminium

A NO_AIRBUS_PI Yes QUALIFIED 14/11/2019 09:58:52 25/01/1999 00:00:00

139105 ATECA VOIR CODE115074

VERLHAGUET MONTAUBAN 82000 France HEAT TREATMENTSPECIALISTS

03 Installation,Manufacture,Fabrication

03-09 Cutting ofmetals

Laser cutting of steel,titanium and nickel

alloys

AIPS03-09-001 Laser cutting of steel,titanium and nickel

alloys

5 AIPI03-09-001 Laser cutting of steel,titanium and nickel

alloys

A2 Yes QUALIFIED WITHLIMITATIONS

02/04/2020 11:22:43 TA6V 1 TO 1.9 MMUNDER 2/10

DIAMETER ANDMANDATORY

DEBURRING + 2.5MM //

TA6V // INOXM //T40 // Z10CNT18-10

// NC22FeD //NC22DNb //

MEANS : LASER 3RAPIDO TYPE PLS

3000 //ONLY FOR PARTSCLASS 2S AND 3

25/09/2015 00:00:00



04 Heat Treatment 04-00 GeneralRequirements

Heat treatment ofmetallic materials -

general

AIPS04-00-000 Heat treatment ofmetallic materials -

General

2 NA Yes QUALIFIED 24/04/2019 11:10:54 07/04/2014 00:00:00



04 Heat Treatment 04-03 Heat treatmentof steel alloys

Heat treatment ofsteels

80-T-36-1020 Heat Treatment ofSteel



24/09/2019 13:36:29 HT OF STEEL 13/11/2015 00:00:00





AIPS04-03-001 Heat Treatment ofSteels

2 AIPI04-03-001 Heat Treatment ofSteels


02/04/2020 11:18:42 # FURNACE BMI-VSE FOR Z6CNT18-10 HYPERQUENCH# FURNACE DVM-FH & BMI-VSE FOR

EZ6NCT25TEMPERING/AGEIN

G

31/03/2015 00:00:00



04 Heat Treatment 04-04 Heat treatmentof nickel alloys

Heat treatment nickelalloy parts

AIPS04-04-001 Heat treatment ofnickel alloy parts

4 AIPI04-04-001 Heat treatment ofnickel alloy parts


21/11/2019 10:52:12 # FURNACES DVM-FH & BMI-VSE FOR

INCO 718(SOLUTION HEATTREATMENT ANDPRECIPITATION

HARDENING)

31/03/2015 00:00:00

139300 ATLAS AIRSERVICE AG

OTTO-LILIENTHAL-STR. 23

GANDERKESEE 27777 Germany NDT SPECIALISTS Non DestructiveTesting




13/09/2018 13:21:18 DOES NOTPERFORMETCHING

NA NA 03/12/2012 00:00:00

139956 AVIA PEINTURE ZONE AMBROISE SAINT MARTIN DESEIGNAN




ADET0092 Peinture des pieceselementaires encomposite ( horsamenagementcommercial )

F NO_AIRBUS_PI Yes AUTHORISATIONTO PROCEED

2020-12-31 30/09/2020 10:40:06 5000.00 1000.00 1000.00 24/09/1998 00:00:00





Application ofDecorative Interior

Paint

ADET0149 Peintures surcomposites realises

a base de resinephenolique renforcee

de fibres longues

D NO_AIRBUS_PI Yes QUALIFIED 06/03/2019 14:16:04 110.00 700.00 285.00 05/11/2001 00:00:00






Paint

AIPS05-02-006 Application ofDecorative Interior

Paint

6 AIPI05-02-006 Application ofDecorative Interior

Paint

A3 Yes AUTHORISATIONTO PROCEED

2020-12-31 30/09/2020 10:23:56 22/07/2016 16:01:12











3 Yes QUALIFIED 30/09/2020 10:15:28 08/10/2018 15:15:57

140748 OERLIKONBALZERS COATING

FRANCE SAS

16 AVENUE JAMESDE ROTHSCHILD

FERRIERES-EN-BRIE



02-03 Deposition Physical vapordeposition of titaniumnitride for coating of

nickal alloys,stainless steels and

aluminium alloys

ADET0194 Protection par nitrurede titane (TIN) desalliages de nickel,

aciers inoxydables etalliages de titane

F NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

06/11/2018 14:43:18 LIMITED TO ONE (1)FURNACE,

IDENTIFIED AS SN150

ONLY ONE (1)REWORK

AUTHORIZEDFOLLOWING

SUPPLIER WORKINSTRUCTIONS FIT084 REV 2: valid for

Inconel and StainlessSteel

18/12/2012 00:00:00


FRANCE SAS


FERRIERES-EN-BRIE





aluminium alloys

AIPS02-03-003 Physical VaporDeposition of

titanium nitride forcoating of nickelalloys, stainless

steels and titaniumalloys

2 NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

30/01/2020 10:30:57 LIMITED TO ONE (1)FURNACE,

IDENTIFIED AS SN150

ONLY ONE (1)REWORK

AUTHORIZEDFOLLOWING

SUPPLIER WORKINSTRUCTIONS FIT084 REV 2: valid for

Inconel and StainlessSteel

18/12/2012 00:00:00


FRANCE SAS


FERRIERES-EN-BRIE




agents

WC-CH coating byPhysical Vapour

Deposition

AIPS02-04-007 WC-C:H coating byPhysical Vapour

Deposition


07/07/2020 15:12:30 Base materials:Copper Alloy

(QCS150810_i2) ;stainless steels,

nickel-chromium andtitanium alloys.

Including cleaningand degasing.

Equipment: LIMITEDTO ONE (1)

FURNACE, SERIERS50, IDENTIFIED

AS 1578-1809(QCS150810_i3) and

FOUR (4)FURNACES,

SERIES BAI830C,IDENTIFIED AS L

SN 252, N SN 272, FSN 249 and S SN

264.

Rework: ONLY ONE(1) STRIPPINGAUTHORIZEDFOLLOWING

SUPPLIER WORKINSTRUCTIONS FIT084 REV 2. valid for

Inconel, Titanium andStainless Steel. NO

REWORK on CopperAlloy.

150810_i2;QCS150810_i3

Delta Qualification ofWC-CH PVD

accoding to AIPS;Re-Qualification of

WC-CH PVDaccording to AIPS 02

Delta Qualification ofWC-CH PVD

accoding to AIPS 02-04-007 fromOERLIKON

BALZERS to beapplied on C;Re-

Qualification of WC-CH PVD according toAIPS 02-04-007 with

RS50 equipmentfrom OERLIKON

BALZERS

31/08/2015 00:00:00



02 Nov 2020 10:51

3/81




ess scope


143436 BODYCOTE HEATTREATMENTS LTD

CHARD BUSINESSPARK

CHARD TA20 1FA United Kingdom HEAT TREATMENTSPECIALISTS



general


General

2 NA Yes QUALIFIED 09/03/2020 15:43:44 29/05/2019 17:19:35


CHARD BUSINESSPARK


04 Heat Treatment 04-02 Heat treatmentof titanium alloys

Heat treatment oftitanium and titanium

alloys

ABP3-1117 HEAT TREATMENTOF TITANIUM

8 ABP3-1117 HEAT TREATMENTOF TITANIUM

8 Yes QUALIFIED 24/04/2019 11:12:54 14/12/2009 00:00:00


CHARD BUSINESSPARK




alloys

AIPS04-02-001 Heat treatment oftitanium and titanium

alloys

5 AIPI04-02-001 Heat treatment oftitanium and titanium

alloys


09/03/2020 16:40:23 Only Stress Relief onAdditive

Manufactured PartsOnly Furnace VFS

29/05/2019 17:25:30


CHARD BUSINESSPARK




ABP3-1116 HEAT TREATMENTOF STEELS

5 ABP3-1116 HEAT TREATMENTOF STEELS

5 Yes QUALIFIED 24/04/2019 11:12:54 14/12/2009 00:00:00


CHARD BUSINESSPARK




ABP3-1115 STRESSRELIEVING HEATTREATMENT OF

STEELS ANDNICKEL ALLOYS

3-1 ABP3-1115 STRESSRELIEVING HEATTREATMENT OF


3-1 Yes QUALIFIED 24/04/2019 11:12:54 14/12/2009 00:00:00

143439 BODYCOTE HIT ROUTE DE CROUY- ZI

NEUILLY ENTHELLE

60530 France HEAT TREATMENTSPECIALISTS



general


General

2 NO_AIRBUS_PI Yes QUALIFIED 24/04/2019 11:15:39 01/03/2016 10:24:51


NEUILLY ENTHELLE




alloys


alloys


alloys


02/04/2020 12:13:04 worksheet N°2250furnaces 11 and15

17/04/2013 00:00:00


NEUILLY ENTHELLE







24/04/2019 11:15:39 Z10/Z6 and Furnace11/15

04/09/2017 09:28:22


NEUILLY ENTHELLE





2 IPDA61-03 TRAITEMENTTHERMIQUE DESMETAUX DURS


02/04/2020 11:30:48 Z10 / AGEING Z6(ON FURNACES 11

AND 15)

06/12/2013 00:00:00


NEUILLY ENTHELLE





4 IPDA61-03 TRAITEMENTTHERMIQUE DESMETAUX DURS


02/04/2020 12:07:49 INCONEL 718 //INCONEL 625

06/12/2013 00:00:00

143440 BODYCOTE HIT RUE TUMULUS - ZI SERRES CASTET 64121 France HEAT TREATMENTSPECIALISTS



general


General





alloys


alloys


alloys


24/04/2019 11:16:40 IN FURNACEP39/P23

21/05/2014 00:00:00







29/09/2020 14:39:19 AGEING ANDSOLUTION

EZ6NCT25 / 17-4PH/ 13-8MO //

TEMPERING -ANNEALING 35NC6

- 15CDV6 -35NCD16 // AGING ON

CUSTOM 465 //HYPERTEMPERING

Z6CNT18-10

13/11/2014 00:00:00







29/09/2020 14:37:49 AGEING INCO 718ON FURNACES

P11/P16/P39/P47/P48 // SOLUTION INCO625 ON FURNACES

P22/P41/P48

13/11/2014 00:00:00

150726 DALIC 41, RUE DES EAUX VITRE CEDEX 35501 France SURFACETREATMENTSPECIALISTS

TBD TBD Pad nickel +cadmium plating ofaluminium alloys

ADET0147 Nickelage +Cadmiage au tampon

des alliages daluminium

B NO_AIRBUS_PI Yes QUALIFIED 14/11/2019 10:04:49 26/04/1999 00:00:00

150951 DARCHEMENGINEERING

LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 01 JoiningTechniques

01-02 Fastening withbolts and fasteners

Bolt torque tightening ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,

NUTS AND OTHERFASTENING

PARTS.

7 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,

NUTS AND OTHERFASTENING

PARTS.

7 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Bolt torque tightening AIPS01-02-008 Torque tightening ofscrews, bolts and

nuts

14 AIPI01-02-008 Torque tightening ofscrews, bolts and

nuts

A3 Yes QUALIFIED 23/07/2019 08:24:10 26/07/2012 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



General assemblyand installation of

fasteners

I+D-L-113 ALUMINIUM ALLOYAND NIOBIUM

TITANIUM ALLOYSOLID SHANK

RIVETS

B2 I+D-L-113 ALUMINIUM ALLOYAND NIOBIUM


RIVETS

B2 Yes QUALIFIED 10/10/2018 16:02:43 15/06/2016 10:38:15


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Installation of BlindBolts and Blind

Rivets - Pull-type -

ABP2-1065 RIVETING WITHBLIND NUT PLATE

RIVETS

2 ABP2-1065 RIVETING WITHBLIND NUT PLATE

RIVETS

2 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES





ABP2-1066 RIVETING WITHBLIND STEM LOCKRIVETS ( AVDEL )

1 ABP2-1066 RIVETING WITHBLIND STEM LOCKRIVETS ( AVDEL )

1 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES





ABP2-1067 RIVETING WITHBLIND RIVETS

4 ABP2-1067 RIVETING WITHBLIND RIVETS

4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES





ABP2-1069 RIVETING WITHBLIND FLUSH

BREAK RIVETS (AVDEL MBC )

1-4 ABP2-1069 RIVETING WITHBLIND FLUSH

BREAK RIVETS (AVDEL MBC )

1-4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES





ABP2-2337 MANUALFASTENING WITHSINGLE ACTIONLOCKING BLIND

BOLTS

2-1 ABP2-2337 MANUALFASTENING WITHSINGLE ACTIONLOCKING BLIND

BOLTS

2-1 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Installation ofbushes, shrink and

press fit

ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER

FASTENING PARTS

2 ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER

FASTENING PARTS

2 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Installation of parallelshank threaded

fasteners

ABP2-2075 FIXATIONMANUELLE AUMOYEN DE VIS,

FILETAGE COURT,EXTREMITE AEMPREINTE

9 ABP2-2075 FIXATIONMANUELLE AUMOYEN DE VIS,

FILETAGE COURT,EXTREMITE AEMPREINTE

9 Yes QUALIFIED 24/10/2019 10:41:01 10/10/2017 11:18:21


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Preparation of holesin metallic materials

for fastening

ABP2-3097 PREPARATION OFCOUNTERSUNK

HOLES INMETALLIC

MATERIALS FORFASTENING AND

RIVETING

1 ABP2-3097 PREPARATION OFCOUNTERSUNK

HOLES INMETALLIC

MATERIALS FORFASTENING AND

RIVETING

1 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES




for fastening

ABP6-3205 FABRICATION ANDDEBURRING OF

HOLES INMETALLIC

MATERIALS

1 ABP6-3205 FABRICATION ANDDEBURRING OF

HOLES INMETALLIC

MATERIALS

1 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES


01-04 Weldling,Brazing, Soldering

Brazing of MetallicMaterials

ABP2-4099 APPROVAL OFWELDING AND

BRAZINGOPERATORS

9 ABP2-4099 APPROVAL OFWELDING AND

BRAZINGOPERATORS

9 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Plasma Arc Weldingof Metallic Materials

ABP2-4355 ACCEPTANCESTANDARDS FORTUNGSTEN INERT

GAS ( T.I.G.) &PLASMA ARC

WELDING ( P.A.W.)PROCESSES

4 ABP2-4355 ACCEPTANCESTANDARDS FORTUNGSTEN INERT

GAS ( T.I.G.) &PLASMA ARC

WELDING ( P.A.W.)PROCESSES

4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Resistance welding ABP2-4098 QUALIFICATION OFRESISTANCE

WELDINGMACHINES AND

WELD SCHEDULES

4 ABP2-4098 QUALIFICATION OFRESISTANCE

WELDINGMACHINES AND

WELD SCHEDULES

4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Resistance welding ABP2-4100 ELECTRICRESISTANCE

WELDING

5 ABP2-4100 ELECTRICRESISTANCE

WELDING

5 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00



02 Nov 2020 10:51

4/81




ess scope



LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Resistance welding I+D-P-182 Resistance weldingof metals

A2 I+D-P-182 Resistance weldingof metals


10/10/2018 16:02:43 QUALIFIED ONLYCLASS C WELDING

AND MATERIALSGROUPS I AND II

(STEELS ANDNICKEL BASED

ALLOYS)

16/05/2012 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES



Tungsten Inert Gaswelding of metallic

materials

ABP2-4102 TUNGSTEN INERTGAS ( TIG )WELDING

8 ABP2-4102 TUNGSTEN INERTGAS ( TIG )WELDING

8 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES




materials

AIPS01-04-008 Tungsten Inert Gas(TIG) Welding ofMetallic Materials

5 AIPI01-04-008 Tungsten Inert Gas(TIG) Welding ofMetallic Materials

A1 Yes QUALIFIED 10/09/2018 11:15:53 01/12/2015 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES




materials

I+D-P-181 Fusion welding ofmetals

B2 I+D-P-181 Fusion welding ofmetals

B2 Yes QUALIFIED WITHLIMITATIONS

10/10/2018 16:02:43 ONLY MATERIALGROUP B CLASS III

07/05/2012 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 02 SurfaceTreatments



expansion





4 Yes QUALIFIED 24/09/2019 09:43:14 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 03 Installation,Manufacture,Fabrication



alloys

ABP6-3349 LASER CUTTING 4 ABP6-3349 LASER CUTTING 4 Yes QUALIFIED 14/02/2019 10:52:15 18/11/2010 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 03 Installation,Manufacture,Fabrication



alloys

AIPS03-09-001 Laser cutting of steel,titanium and nickel

alloys

5 AIPI03-09-001 Laser cutting of steel,titanium and nickel

alloys

A2 Yes QUALIFIED 10/10/2018 16:02:43 15/02/2012 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 05 Paints, Coatings,Filler, Sealant

05-05 Sealant Sealing of aircraftstructure

ABP4-5142 APPLICATION DEMASTIC

D¿ETANCHEITESUR LA

STRUCTUREGENERALE DE

L¿AVION

16 ABP4-5142 APPLICATION DEMASTIC

D¿ETANCHEITESUR LA


L¿AVION

16 Yes QUALIFIED 24/07/2019 08:32:47 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.

ABP5-1153 ADHESIVEBONDING OF

SILICONE RUBBERWITH SILICONE

ADHESIVE

4 ABP5-1153 ADHESIVEBONDING OF

SILICONE RUBBERWITH SILICONE

ADHESIVE


23/01/2018 15:39:30 Use of Type 3Silastic 3145 (grey)

adhesive as pernotes 13 on Airbus

drawings L215-50540 and L215-

50543 only.

30/10/2017 11:31:28


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.

I+D-P-071 Non structuralbondings (General

specification)

B I+D-P-071 Non structuralbondings (General

specification)

B Yes QUALIFIED 23/07/2019 08:33:03 26/10/2012 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 09 Cleaning, De-oxidation, Pickling,Chemical Coating




4 Yes QUALIFIED 24/09/2019 09:41:38 14/12/2009 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB 09 Cleaning, De-oxidation, Pickling,Chemical Coating


AIPS09-02-005 Pickling of Titaniumand its alloys

3 AIPI09-02-005 Pickling of Titaniumand its alloys

3 Yes QUALIFIED 10/09/2018 11:15:53 01/12/2015 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES

TS21 1LB United Kingdom TEST LAB Non DestructiveTesting


DETECTION



LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES





10/09/2018 11:15:53 # titanium productonly with Type

1.A.3.a/d and Type1.C.3.a/d method.

# NCF-0361: It shallbe ensured that

rough and/or grindedarea with highbackground

fluorescence will bere-inspected with

penetrant ofsensitivity level 2

08/07/2015 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES


Penetrant Penetrant testing I+D-E-137 Penetrant inspectionprocess

E NA Yes QUALIFIED WITHLIMITATIONS

10/10/2018 16:02:43 LIMITED TO TYPE IAND METHOD A

NA NA 15/02/2012 00:00:00


LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES


RadiographicInspection

Radiographicinspection-General

ABP6-5346 TESTING BYRADIOGRAPHY



LIMITED

IRONMASTERSWAY

STOCKTON-ON-TEES




AITM6-7002 Méthode d¿EssaiAirbus Applicableaux Procédés de

Contrôle Contrôle parRadiographieGénéralités

7 AITM6-7002 Méthode d¿EssaiAirbus Applicableaux Procédés de



10/09/2018 11:15:53 # film radiography onwelded product only

# InstallationDAS204/205 and

DAS206/207

08/07/2015 00:00:00

155784 LELECTROLYSE ZI DE MAUCOULET LATRESNE 33360 France SURFACETREATMENTSPECIALISTS



aluminium alloys

AIPS02-01-001 Chromic acidanodizing of

aluminium alloys





aluminium alloys

ADET0091 Oxydation anodiquesulfurique des

alliages d aluminium

H NO_AIRBUS_PI Yes QUALIFIED 25/10/2016 15:20:55 16/03/2015 00:00:00




aluminium alloys

AIPS02-01-002 Sulphuric acidanodising of

aluminium alloys

4 AIPI02-01-002 Sulphuric acidanodising of

aluminium alloys

2 Yes QUALIFIED 25/10/2016 15:20:55 18/12/2015 00:00:00













24/02/2017 14:57:24 SURFACETREATMENT

MANUAL LINE (LINEC) and THE

AUTOMATIC LINE(LINE G) AREQUALIFIED.

18/12/2015 00:00:00





expansion

Dry blasting AIPS02-02-002 Dry blasting 2 AIPI02-02-002 Dry blasting 2 Yes QUALIFIED 25/10/2016 15:20:55 16/03/2015 00:00:00



02-03 Deposition Deposition ofaluminium by the

thermal sprayprocess

ADET0180 Protection des acierspar projection a

chaud d aluminium

C NO_AIRBUS_PI Yes QUALIFIED 25/10/2016 15:20:55 16/03/2015 00:00:00





AIPS02-03-004 Deposition ofAluminium by theThermal Spray

Process


25/10/2016 15:20:55 ADET0180 SCOPE& LIMITATIONS(REMARKS) INACCORDANCE

WITH AIPS00-00-006 TABLE 4.1

16/03/2015 00:00:00




agents


AIPS02-04-002 Electrolytic cadmiumplating





passivation


AIPS02-05-001 Chemical conversioncoating

3 AIPI02-05-001 Chemical conversioncoating


27/07/2018 14:17:52 LINE B AND G 16/03/2015 00:00:00




passivation


Steel


Steel


Steel

2 Yes QUALIFIED 25/10/2016 15:20:56 18/12/2015 00:00:00




passivation


Steel


Steel

2 IPDA62-44 BAIN DEDECAPAGE DES

ACIERS INOXAUSTENITIQUES

A2 Yes QUALIFIED 25/10/2016 15:20:56 16/03/2015 00:00:00




passivation


Steel


Steel





passivation



AIPS02-05-003 Passivation ofmartensitic andaustenitic steel


06/04/2020 13:37:28 Limited to case 2 ofAIPS

16/03/2015 00:00:00




ADET0071 Peinture des pieceselementairesmetalliques

J NO_AIRBUS_PI Yes QUALIFIED 25/10/2016 15:20:55 16/03/2015 00:00:00



02 Nov 2020 10:51

5/81




ess scope






systems

AIPS05-02-003 Application ofexternal paint

systems

5 AIPI05-02-003 Application ofexternal paint

systems


13/02/2018 10:28:45 Only for varnishapplication on ink

marking.

10/07/2017 14:45:41







A3 Yes QUALIFIED 25/10/2016 15:20:56 06/10/2015 00:00:00









16/03/2015 00:00:00







parts


parts


05/04/2018 16:12:49 METALLIC PARTS 19/02/2016 10:30:16


07 Electrical 07-01 Assembly Electrical bonding AIPS07-01-006 Electrical Bonding 9 AIPI07-01-006 Electrical Bonding B1 Yes QUALIFIED WITHLIMITATIONS

27/02/2019 13:55:00 Only for maskingapplication to protectbonding point fromsurface treatment /

Paint

01/12/2017 14:08:53






3 Yes QUALIFIED 25/10/2016 15:20:56 16/03/2015 00:00:00



Etch Inspection TESTING OFSTEELS AFTERMACHINING BY

ETCH INSPECTION

AITM6-3006 Testing of steels aftermachining by etch

inspection

2 AITM6-3006 Testing of steels aftermachining by etch

inspection


25/10/2016 15:20:57 LOW ALLOY STEELONLY

NONE NONE 15/09/2014 00:00:00



Magnetic ParticleInspection


AITM6-2001 Magnetic ParticleInspection






12 Yes QUALIFIED 25/10/2016 15:20:56 NONE NONE 06/10/2015 00:00:00

155999 ELHCOELECTROLESSHARD COAT SA

CR SABADELL-GRANOLLERS KM

11

LLICA DE VALL 8185 Spain SURFACETREATMENTSPECIALISTS




expansion

Dry blasting AIPS02-02-002 Dry blasting 2 AIPI02-02-002 Dry blasting 2 Yes QUALIFIED WITHLIMITATIONS

14/11/2019 10:07:09 ONLY AS PROCESSPRIOR TO

ELECTROLESS(CHEMICAL)

NICKELPHOSPHORUS AND

ELECTROLESS(CHEMICAL)

NICKELPHOSPHORUS -

PTFE

03/07/2013 00:00:00



11




agents

Electroless ChemicalNickel - Phosphorus

Plating

AIPS02-04-008 Electroless(Chemical) Nickel -Phosphorus Plating

2 AIPI02-04-008 Electroless(Chemical) Nickel -Phosphorus Plating


14/11/2019 10:07:08 ONLY FOR TYPE 2CLASS2, TYPE 3 AS

SUBSTRATE OFELECTROLES

NICKELPHOSPHORUS-PTFE DUPLEXCOATING AND

TYPE 4

17/06/2014 00:00:00



11




agents

Electroless chemicalNickel Phosphorus -PTFE duplex coating

AIPS02-04-011 Electroless(chemical) Nickel

Phosphorus - PTFEduplex coating

2 AIPI02-04-011 Electroless(chemical) Nickel


1 Yes QUALIFIED 14/11/2019 10:07:08 17/06/2014 00:00:00



11




agents

Electrolytic Zn Niplating

AIPS02-04-006 Electrolytic Zinc-Nickel plating

3 AIPI02-04-006 Electrolytic Zinc-Nickel plating

1 Yes QUALIFIED 14/11/2019 10:07:09 17/06/2014 00:00:00



11




passivation


Steel


Steel


Steel

2 Yes QUALIFIED 14/11/2019 10:07:09 28/02/2013 00:00:00

156822 ERICHSHARTCHROM

GMBH

GROSSER KAMP 9 BARSBUETTEL 22885 Germany SURFACETREATMENTSPECIALISTS




expansion



Yes QUALIFIED 14/11/2019 10:08:17 09/12/2014 00:00:00


GMBH




agents






Yes QUALIFIED 14/11/2019 10:08:18 09/12/2014 00:00:00


GMBH




agents


80-T-35-3000 Cadmium¿Plating ofSteel


Yes QUALIFIED 14/11/2019 10:08:18 09/12/2014 00:00:00


GMBH




agents


80-T-35-3003 Cadmium - Plating ofCopper Alloys


Yes QUALIFIED 20/12/2019 16:33:56 09/12/2014 00:00:00


GMBH




agents


80-T-36-3300 Dehydrogenation ofSteels


Yes QUALIFIED 14/11/2019 10:08:18 09/12/2014 00:00:00


GMBH




agents



5 80-T-35-3000 Cadmium¿Plating ofSteel


14/11/2019 10:08:18 (SEE AP2190.0 FORDEFINITION)80-T-35-3000

SCOPE &LIMITATIONS

(REMARKS) INACCORDANCE

WITH AIPS00-00-006 TABLE 4.1.

18/08/2015 00:00:00


GMBH




agents

Hard chrome platingof steel

80-T-35-3200 Hard ChromiumPlating



23/01/2020 17:59:55 GOUNDINGOPERATION BY

LITTMANPRECISION (ARP-

ID178142)

09/12/2014 00:00:00


GMBH




agents


AIPS02-04-004 Hard ChromiumPlating of Steels

7 80-T-35-3200 Hard ChromiumPlating



SCOPE &LIMITATIONS



18/08/2015 00:00:00


GMBH




passivation





20/12/2019 16:37:28 IMMERSIONPROCESS ONLY

09/12/2014 00:00:00


GMBH




passivation



3 80-T-35-1101 Chromating ofAluminum andAluminum Alloy



SCOPE &LIMITATIONS



18/08/2015 00:00:00


GMBH




passivation


Steel


Steel

2 80-T-35-1200 Passivieren vonNichtrostendenAustenitischen

Stählen



SCOPE &LIMITATIONS



18/08/2015 00:00:00


GMBH




passivation




Stählen


Stählen

Yes QUALIFIED 29/01/2020 17:43:47 09/12/2014 00:00:00


GMBH




passivation







Yes QUALIFIED 14/11/2019 10:08:19 09/12/2014 00:00:00


GMBH




passivation

Phosphating of steel 80-T-35-1000 Phosphating 80-T-35-1000 Phosphating Yes QUALIFIED 14/11/2019 10:08:17 09/12/2014 00:00:00



02 Nov 2020 10:51

6/81




ess scope



GMBH




passivation

Phosphating of steel AIPS02-05-004 Phosphating of Steel 2 80-T-35-1000 Phosphating Yes QUALIFIED WITHLIMITATIONS


SCOPE &LIMITATIONS



18/08/2015 00:00:00


GMBH



09-01 Cleaning, De-oxodation

Electrolyticdegreasing

80-T-35-0030 ElectrolyticDegreasing


Yes QUALIFIED 10/01/2020 16:45:46 10/01/2020 16:45:11


GMBH










3 Yes QUALIFIED 14/11/2019 10:08:17 09/12/2014 00:00:00


GMBH




GMBH


TBD TBD Silver - plating of Cuand Cu - Alloys -Electroplating -

80-T-35-3304 Silver - plating of Cuand Cu - Alloys -Electroplating -

80-T-35-3304 Silver - plating of Cuand Cu - Alloys -Electroplating -


14/11/2019 10:08:17 # ASTM-B700 TYPEI GRAD A, MAT

# STEEL, COPPERAND COPPER-

BASE PRODUCTONLY

09/12/2014 00:00:00

160624 MECADAQ PESSAC 9 A 13 RUEEUGENE

CHEVREUL

PESSAC 33600 France OTHER EWBSPECIALISTS

01 JoiningTechniques


Bolt torque tightening ADET0030 Couples de serragede la boulonnerie

structurale

P IPDA71-03 APPL COUPLESERRAGE

BOULONNERIESTRUCTUR

A2 Yes QUALIFIED 04/03/2020 16:19:22 06/10/2016 15:38:59


CHEVREUL





nuts


nuts

A3 Yes QUALIFIED 04/03/2020 16:19:22 14/12/2016 16:55:26


CHEVREUL





fasteners

AIPS01-02-017 General assemblyand installation of

fasteners

5 AIPI01-02-017 General assemblyand installation of

fasteners

A3 Yes QUALIFIED 27/02/2019 14:36:56 29/09/2015 00:00:00


CHEVREUL





press fit

ADET0173 Emmanchement desbagues montees

serrees

D IPDA75-05 EMMANCHEMENTDE BAGUESMONTEESSERREES

A3 Yes QUALIFIED 24/06/2019 09:39:40 08/04/2019 17:14:13


CHEVREUL





press fit

AIPS01-02-019 Installation ofbushes, shrink and

press fit

4 AIPI01-02-019 Installation ofbushes, shrink and

press fit


27/02/2019 14:36:56 RESTRICTED TOMETHOD B

06/10/2015 00:00:00


CHEVREUL





for fastening

AIPS01-02-003 Preparation of Holesin Metallic Materials

for Fastening

8 AIPI01-02-003 Preparation of Holesin Metallic Materials

for Fastening


27/02/2019 14:36:55 MANUAL DRILLING 06/10/2015 00:00:00


CHEVREUL



03-03 Fabrication,bearings, swaging

Bonding of bearingsand bushes by

anaerobic compound

ADET0033 Scellements desbagues roulements

rotules

G IPDA74-01 SCELLEMENT AFRD BAGUE-ROULEMENT-

ROTULE

A3 Yes QUALIFIED 24/04/2019 11:31:50 08/04/2019 17:08:37


CHEVREUL





anaerobic compound

AIPS03-03-014 Bonding of bearingsand bushes by

anaerobic compound

5 AIPI03-03-014 Bonding of bearingsand bushes by

anaerobic compound


04/03/2020 16:19:22 Only for product usedwithin the SSL

05/04/2016 17:13:26


CHEVREUL




Installation ofbearing, spherical

bearing and bushesby swaging

ADET0191 Montage desroulements, rotules

et bagues parsertissage

D IPDA75-06 MONT&SERTROULEMENT&ROT

ULE ET BAGUE

A2 Yes QUALIFIED 24/04/2019 11:31:50 08/04/2019 17:18:06


CHEVREUL






AIPS03-03-012 Installation ofbearing, spherical


5 AIPI03-03-012 Installation ofbearing, spherical


A2 Yes QUALIFIED 27/02/2019 14:36:57 29/01/2015 00:00:00


CHEVREUL






General


General


09/04/2019 08:13:32 80-T-35-9120restricted to 80-T-35-9023 and drying atroom temperature

08/04/2019 16:48:04


CHEVREUL




AIPS05-05-001 Sealing of aircraftstructure

8 AIPI05-05-001 Sealing of aircraftstructure


11/04/2019 10:03:32 EXCEPT IN FUELTANK AREA

29/09/2015 00:00:00


CHEVREUL



05-05 Sealant Surface protection offasteners andsealants by

application of varnish

80-T-35-9023 Preservation of RivetRows


Yes QUALIFIED 09/04/2019 08:10:47 08/04/2019 16:43:41


CHEVREUL





AIPS05-05-003 Surface protection offasteners andsealants by


3 AIPI05-05-003 Surface protection offasteners andsealants by


A6 Yes QUALIFIED 04/03/2020 16:19:23 05/04/2016 17:16:40


CHEVREUL



05-05 Sealant Wet installation offasteners

AIPS05-05-004 Wet installation offasteners

6 AIPI05-05-004 Wet installation offasteners

A4 Yes QUALIFIED 27/02/2019 14:36:58 29/09/2015 00:00:00


CHEVREUL




materials

AITM6-6004 Détermination de laconductivité

électrique desalliages d'aluminiumpar la méthode des

courants de Foucault

5 AITM6-6004 Détermination de laconductivité



5 Yes QUALIFIED 11/04/2019 09:55:46 16/07/2014 00:00:00

163069 GMA-WERKSTOFFPRUE

FUNG GMBH

HANSAALLEE 321 DUESSELDORF 40549 Germany NDT SPECIALISTS Non DestructiveTesting








13/03/2020 13:46:32 Film radiography +Computed

radiography IAWASTM-E2033 and

ASTM-E2445

Inspection of AMparts using computed

radiography iawQCS200199 issue 2

(AITM6-7002 &ASTME2033 /ASTM

E2445)Equipment: Thalesmake THX 1030

(160kV X-ray tube)Material: TitaniumStructure build up,

part family: QL2 andQL3 parts (except

high complexgeometry parts withbionic structure) +

QL1 mechanical testspecimens producedby additive powderbed technology as

per AIMS 03-22-000Thickness range: up

to 16mmDefect detectioncapability for AM

parts usingComputed

Radiography:1) 400µ defects up to10 mm thickness withsurface condition ofmachined and as

build condition (up toRa =15µ).

2) 500µ defects forthickness range 10 to16mm with surface

condition up toRa=3.6µ.

3) 800µ defects up to16 mm thickness with

max collectivesurface condition up

to Ra =15µ.

QCS200199 issue 2 Qualification inaccordance with

AITM6-7002, issue

Qualification inaccordance with

AITM6-7002, issue7+ ASTME2033;

ASTM E2445 forparts inspection inc

19/10/2015 00:00:00

168972 STI FRANCE SA ZI LE TOUYA ARUDY 64260 France SURFACETREATMENTSPECIALISTS











A3 Yes QUALIFIED 06/03/2019 11:53:12 1400.00 2500.00 1095.00 05/04/2013 00:00:00





expansion


25/10/2016 15:27:51 TITANIUM PARTSONLY

01/04/2015 00:00:00



02 Nov 2020 10:51

7/81




ess scope





agents




06/03/2019 11:38:54 CUVE N°A12 55.00 45.00 50.00 11/05/2006 00:00:00




passivation




2 Yes QUALIFIED 25/10/2016 15:26:23 01/04/2015 00:00:00




passivation


Steel


Steel


Steel

2 Yes QUALIFIED 12/12/2016 10:20:28 26/11/2015 00:00:00




passivation



ADET0268 Passivation desaciers inoxydablesmartensitiques et

austenitiques

A NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

06/03/2019 11:41:34 ACIERSAUSTÉNITIQUES -

CUVE N° G2

30.00 30.00 30.00 09/05/2006 00:00:00




passivation

Phosphating of steel ADET0081 Phosphatation desaciers non

inoxydables (R<1450 MPa )

C NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

06/03/2019 11:46:32 ACIER R < 1450MPA - CUVE N° H2

09/05/2006 00:00:00




passivation

Phosphating of steel AIPS02-05-004 Phosphating of Steel 2 AIPI02-05-004 Phosphating of Steel 1 Yes QUALIFIED WITHLIMITATIONS

06/03/2019 11:49:08 STEEL WITH RM <1450 MPA

TANK N° H2

120.00 50.00 50.00 30/05/2018 10:30:04





Paint


Paint


Paint

A3 Yes QUALIFIED 06/03/2019 14:24:37 08/11/2016 16:24:47





systems


systems


systems


06/03/2019 12:08:19 DECORATIONAPPLICATION NOT

PERMITTED

18/07/2017 13:21:05








06/03/2019 14:23:32 ON ALL FACILITIESAND FOR

METALLIC ANDTITANIUM PARTS.

2300.00 4200.00 3100.00 01/04/2015 00:00:00







parts


parts

2 Yes QUALIFIED 06/03/2019 12:04:47 250.00 125.00 80.00 18/07/2017 13:48:11



13/10/2020 00:13:51 LIMITED TO SP2,SP3, SP4, SP7, TP1AND TP2 METHODS

18/07/2017 13:59:30






3 Yes QUALIFIED 23/03/2020 08:52:21 23/10/2017 14:13:33



Conductivity Inspection forconfirmation of

anodising process

AITM6-9004 Inspection forconfirmation of theanodising process

(based uponmeasurement of

surface resistance)

2 AITM6-9004 Inspection forconfirmation of theanodising process


surface resistance)

2 Yes QUALIFIED 23/03/2020 08:52:22 18/07/2017 15:41:29




materials







5 Yes QUALIFIED 13/10/2020 00:15:45 18/07/2017 16:03:45




ETCH INSPECTION


inspection


inspection


23/03/2020 08:52:23 BATH A1 FOR LOWALLOY STEELS

ONLY

NONE NONE 03/06/2015 00:00:00






4 AITM6-2001 Magnetic ParticleInspection






IGC04-25-105 ELEMENTSMETALLIQUES -CONTROLE PAR

MAGNETOSCOPIE

H NA Yes QUALIFIED 06/03/2019 12:01:53 FR FR 12/01/2004 00:00:00






06/03/2019 11:57:58 ETCHING NOTAPPLICABLE

ACCORDING TONOTE 1 OF AITM6-1001 v11 (p21), ON :

Marval, Inconel,Stainless Steel (13-8Mo, 15-5PH,17-4PH), and Ti-555.

120.00 50.00 50.00 20/04/2015 00:00:00

169887 IMPACT FINISHERS 107-109 WHITBYROAD

SLOUGH SL1 3DR United Kingdom SURFACETREATMENTSPECIALISTS




expansion





4 Yes QUALIFIED 20/08/2020 14:09:01 18/02/2010 00:00:00






expansion







expansion

Shot peening forfatigue enhancement

of metal parts

ABP1-2028 SHOT PEENINGFOR IMPROVEDFATIGUE AND

STRESSCORROSIONRESISTANCE

9 ABP1-2028 SHOT PEENINGFOR IMPROVEDFATIGUE AND


9 Yes QUALIFIED 20/08/2020 14:09:01 18/02/2010 00:00:00






expansion


of metal parts

ABP1-2353 SHOT PEENINGGENERAL

REQUIREMENTS

4 ABP1-2353 SHOT PEENINGGENERAL

REQUIREMENTS

4 Yes QUALIFIED 20/08/2020 15:56:44 20/08/2020 15:51:59






expansion


of metal parts

AIPS02-02-004 Shot peening forfatigue enhancement

of metal parts

7 AIPI02-02-004 Shot peening forfatigue enhancement

of metal parts

A3 Yes QUALIFIED 20/08/2020 14:09:01 02/08/2013 00:00:00



TBD TBD SURFACEIMPROVEMENTUSING GLASS

BEADS

ABP1-2029 SURFACEIMPROVEMENTUSING GLASS

BEADS

5 ABP1-2029 SURFACEIMPROVEMENTUSING GLASS

BEADS

5 Yes QUALIFIED 24/04/2019 12:56:55 18/02/2010 00:00:00

170090 INDRAERO SIRENDEOLS

ZONEINDUSTRIELLE DE

LA MALTERIE

DEOLS 36130 France HEAT TREATMENTSPECIALISTS



general


General



ZONEINDUSTRIELLE DE

LA MALTERIE


04 Heat Treatment 04-01 Heat treatmentof aluminium alloys

Heat treatment ofaluminium alloy parts

80-T-36-1010 Heat Treatment ofAluminium



07/09/2020 10:56:34 FOR A380 DOORSPROGRAM ONLY

30/05/2013 00:00:00


ZONEINDUSTRIELLE DE

LA MALTERIE




AIPS04-01-001 Heat treatment ofAluminium Alloy

Parts

5 AIPI04-01-001 Heat treatment ofAluminium Alloy

Parts


07/09/2020 10:56:34 OVENS FOU0007AND FOU0011.

18/08/2015 00:00:00


ZONEINDUSTRIELLE DE

LA MALTERIE




materials







5 Yes QUALIFIED 07/09/2020 10:56:34 30/05/2013 00:00:00

170766 INSTITUT DESOUDURE

90 RUE DESVANESSES

VILLEPINTE 93420 France NDT SPECIALISTS Non DestructiveTesting

Ultrasonic Inspection of fibercomposites by

ultrasonic phasedarray pulse-echo

techniques

AITM6-4010 Inspection descomposites de fibres

par la techniqueultrasonore multi-éléments «phased

array»

6 AITM6-4010 Inspection descomposites de fibres


array»


13/09/2018 13:21:18 STRAPS,INTERCOSTALS,

WEB PARTS

QCS110512 QCS110512 13/02/2013 00:00:00

170766 INSTITUT DESOUDURE

90 RUE DESVANESSES

VILLEPINTE 93420 France NDT SPECIALISTS Non DestructiveTesting

Ultrasonic Ultrasonic pulse echoinspection of CFRP

AITM6-4005 Contrôleéchographiqueultrasonore des

plastiques en fibresde carbone

11 AITM6-4005 Contrôleéchographiqueultrasonore des



13/09/2018 13:21:18 FOR UTINSPECTION ON

A350INTERCOSTALS

AND WEB RADIUS.

QCS100859;QCS130163

QCS100859;QCS130163

; 24/11/2010 00:00:00

171473 IONBOND LIMITED UNIT 36 NUMBERONE INDUSTRIAL

EST

CONSETT DH8 6TS United Kingdom SURFACETREATMENTSPECIALISTS




aluminium alloys

ABP1-3334 DEPOSITION OFTITANIUM NITRIDE

BY PHYSICALVAPOUR

DEPOSITION (PVD)

4 ABP1-3334 DEPOSITION OFTITANIUM NITRIDE

BY PHYSICALVAPOUR

DEPOSITION (PVD)

4 Yes QUALIFIED 25/10/2016 15:28:54 14/12/2009 00:00:00



02 Nov 2020 10:51

8/81




ess scope



EST





aluminium alloys




2 AIPI02-03-003 Physical VaporDeposition of




18/12/2019 17:21:39 LIMITED TO TWO(2) COATERS

IDENTIFIED AS Q2and E1 – NOSTRIPPING.

Including Cleaning,Degreasing and

Masking.

09/08/2018 16:49:54


EST




agents


Deposition


Deposition

6 AIPI02-04-007 WC-C:H coating byPhysical Vapour

Deposition


18/12/2019 17:35:13 QCS151161_i2/i3and QCS191241_i1

Base Materials:Copper Alloys,

Stainless Steels,Nickel-Chromium

and Titanium Alloys.

Authorized coateridentified as

PACVD2 andHC424. Including

Cleaning,Degreasing and

Masking. No Rework/ No Stripping.

151161_i1;151161_i3;191241

Qualification of WC-CH acc to AIPS 02-04-007 from ;Re-

qualification of WC-CH coating accordingto AIP;Qualification

of new WCCHCoating Chamber

Hauzer 1

Restricted toStainless steels and

Inconel alloys.Restricted to

Titanium alloys tonon-fatigue

load;Removal ofrestriction to non

fatigue criticalTitanium alloys

parts;This project islaunched to qualify

Hauzer 1500chamber for PVDcoating - WC:C-H

against AIPS 02-04-

02/06/2017 15:29:53

173919 KING AND FOWLERUK LTD

HARRISON WAY LIVERPOOL L3 4BG United Kingdom SURFACETREATMENTSPECIALISTS


02-01 Anodizing Anodizing of titaniumand its alloys

80-T-35-2500 Anodizing ofTitanium and

Titanium Alloys


Titanium Alloys

Yes QUALIFIED 25/10/2016 15:31:04 22/05/2014 00:00:00






TITANIUM


TITANIUM

2 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





aluminium alloys



Yes QUALIFIED 25/10/2016 15:31:04 15/05/2014 00:00:00





aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





aluminium alloys

80-T-35-2000 DC Sulphuric AcidAnodizing without

Sealing


Sealing

Yes QUALIFIED 25/10/2016 15:31:04 15/05/2014 00:00:00





aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






expansion





4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






expansion


03/04/2019 10:52:47 Type I, II and III withAlumina

15/03/2018 13:56:08





agents


ABP1-4041 CADMIUM PLATINGOF STEELS

NICKEL ALLOYS &COPPER ALLOYS

3 ABP1-4041 CADMIUM PLATINGOF STEELS


3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





agents


ABP1-5058 CHROMATEPASSIVATION OF

CADMIUM ANDZINC

3 ABP1-5058 CHROMATEPASSIVATION OF

CADMIUM ANDZINC

3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





agents


ABP1-4042 HARD CHROMIUMPLATING

2 ABP1-4042 HARD CHROMIUMPLATING

2 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





passivation







Yes QUALIFIED 25/10/2016 15:31:04 22/05/2014 00:00:00





passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 25/10/2016 15:31:05 08/12/2011 00:00:00





passivation

Phosphating of steel ABP1-5056 PHOSPHATING OFSTEELS

3 ABP1-5056 PHOSPHATING OFSTEELS

3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00









3-1 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






base d'époxy)


base d'époxy)

Yes QUALIFIED 25/10/2016 15:31:04 15/05/2014 00:00:00







OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





ABP5-1351 SURFACEPREPARATION

PRIOR TOAPPLICATION OF

PAINTS

12 ABP5-1351 SURFACEPREPARATION


PAINTS

12 Yes QUALIFIED 18/11/2010 00:00:00 18/11/2010 00:00:00







General


General

Yes QUALIFIED 25/10/2016 15:31:05 15/05/2014 00:00:00





APPLICATION OFBONDING PRIMER

AS EROSIONRESISTANTCOATING

ABP4-1121 APPLICATION OFBONDING PRIMER


4 ABP4-1121 APPLICATION OFBONDING PRIMER


4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






systems







18 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






systems











11 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






systems







8 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



02 Nov 2020 10:51

9/81




ess scope






APPLICATION OFHIGH

TEMPERATURESTOVE ENAMEL

PAINT TO STEELS

ABP4-2131 APPLICATION OFHIGH


PAINT TO STEELS

3 ABP4-2131 APPLICATION OFHIGH


PAINT TO STEELS

3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00










Yes QUALIFIED 25/10/2016 15:31:04 22/05/2014 00:00:00










Yes QUALIFIED 25/10/2016 15:31:05 22/05/2014 00:00:00










Yes QUALIFIED 25/10/2016 15:31:05 22/05/2014 00:00:00










16 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





materials








ETCH INSPECTION

ABP6-5225 TESTING OFSTEELS AFTERMACHINING BY

ETCH INSPECTION

5-1 ABP6-5225 TESTING OFSTEELS AFTERMACHINING BY

ETCH INSPECTION

5-1 Yes QUALIFIED 02/06/2020 10:51:07 UK UK 18/02/2010 00:00:00






ABP6-5229 Testing By MagneticParticle Flaw

Detection

3-2 NA Yes QUALIFIED 24/03/2010 00:00:00 UK UK 18/02/2010 00:00:00





DETECTION








23/05/2018 08:52:31 Etching process notneeded as

mentioned by theNOTE 1 of the AITM

issue 11

NDT-B-248-11-AW NDT-B-248-11-AW 20/09/2011 00:00:00



TBD TBD PREPARATION OFMETALLIC

MATERIALS FORPLATING

ABP1-4049 PREPARATION OFMETALLIC


6 ABP1-4049 PREPARATION OFMETALLIC


6 Yes QUALIFIED 25/10/2016 15:31:05 15/12/2015 00:00:00

180936 MECAPROTECINDUSTRIES

34 BOULEVARD DEJOFFRERY

MURET CEDEX 31605 France SURFACETREATMENTSPECIALISTS



aluminium alloys




04/07/2018 14:40:23 SEE PFA-013 REV.ACOMPSITION OF

CAA BATHDEVIATING TO THE80-T-35-2100. VALID

FOR A400M VTPTIP.

14/02/2013 00:00:00






aluminium alloys


aluminium alloys







aluminium alloys

















A3 Yes QUALIFIED 05/02/2018 09:27:07 27/07/2017 16:55:04







expansion

Dry blasting AIPS02-02-002 Dry blasting 2 AIPI02-02-002 Dry blasting 2 Yes QUALIFIED 04/04/2018 10:50:21






agents




06/11/2018 10:11:48 MISE EN ŒUVREDES TYPES I ET II

SEULEMENT ACIERR < 1450 MPA

03/02/2006 00:00:00






agents









agents

Non Chromium (VI)passivation for

cadmium plating

AIPS02-04-013 Non Chromium (VI)passivation for

cadmium plating

1 AIPI02-04-013 Non Chromium (VI)passivation for

cadmium plating

A2 Yes QUALIFIED 20/12/2019 15:14:14 20/12/2019 15:13:04






passivation


ADET0079 Traitment parchromatation des


E NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

06/11/2018 10:11:48 SITE N¦1 16/05/2002 00:00:00






passivation





09/12/2013 00:00:00 WITHOUTRESTRICTION FORBATH AND LOCAL

APPLICATION ; THEREWORK

APPLICATIONWASN'T TAKE IN

ACCOUNT.

09/12/2013 00:00:00






passivation




06/11/2018 10:11:48 ACIER R < 1300MPA

03/02/2006 00:00:00






passivation

Phosphating of steel AIPS02-05-004 Phosphating of Steel 2 NO_AIRBUS_PI Yes AUTHORISATIONTO PROCEED WITH

LIMITATIONS

2020-11-30 05/10/2020 09:38:35 Type M only - - - 03/02/2006 00:00:00







J NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

06/11/2018 10:11:49 SITE N¦1;MISE ENŒUVRE DESTYPES I ET II

SEULEMENT ACIERR < 1450 MPA

;ACIER R < 1300MPA

03/02/2006 00:00:00










14/10/2015 00:00:00 METALLIC PARTS 14/10/2015 00:00:00






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 16/09/2020 14:06:06 08/02/2018 12:09:05






materials








29/01/2020 11:13:43 Range ofmeasurements [16-

26] MS/m

29/01/2020 11:01:47









4 Yes QUALIFIED 06/11/2018 10:11:49 AUDIT NADCAP AUDIT NADCAP 17/01/2011 00:00:00








MAGNETOSCOPIE








12 Yes QUALIFIED 06/11/2018 10:11:48 FR FR 03/03/2009 00:00:00

181681 METALIMPROVEMENT

COMPANY

CHEMIN DECAZENAVE

BAYONNE 64100 France SURFACETREATMENTSPECIALISTS




expansion


of metal parts


of metal parts


of metal parts


02/04/2020 14:18:05 Classic shot peeningprocess only

(automatic andmanual)

Means B1, C1, C2,F1, F2, G1, G2, G3,P1, W1 and SRM1.

03/02/2016 15:07:24



02 Nov 2020 10:51

10/81




ess scope



COMPANY

CHEMIN DECAZENAVE

BAYONNE 64100 France SURFACETREATMENTSPECIALISTS




expansion


of metal parts

I+D-P-006 Shot peening F1 I+D-P-006 Shot peening F1 Yes QUALIFIED 24/04/2019 13:40:25 11/07/2016 15:22:50

181682 METALIMPROVEMENTCOMPANY INC

CHESTER ROAD CHESTER CH4 0BZ United Kingdom SURFACETREATMENT

SPECIALISTS AFM-003-5 OTHER EWB

SPECIALISTS












Limited to Pre-Penetrant etching ofAluminium (No TSA

capability).

23/01/2020 15:24:21




SPECIALISTS




expansion





4 Yes QUALIFIED 20/08/2020 14:02:27 04/01/2016 00:00:00




SPECIALISTS




expansion





SPECIALISTS




expansion


of metal parts





9 Yes QUALIFIED 19/07/2019 10:03:21 04/01/2016 00:00:00




SPECIALISTS




expansion


of metal parts


REQUIREMENTS


REQUIREMENTS

4 Yes QUALIFIED 20/08/2020 15:49:42 20/08/2020 15:47:06




SPECIALISTS




expansion


of metal parts


of metal parts


of metal parts

A3 Yes QUALIFIED 19/07/2019 10:03:20 04/01/2016 00:00:00




SPECIALISTS



DETECTION

13 ABP6-5230 TESTING BYPENETRANT FLAW

DETECTION

12 Yes QUALIFIED 14/10/2020 17:54:38 05/11/2019 15:42:12




SPECIALISTS





07/09/2020 13:11:40 Type 1 Method Aonly

05/11/2019 15:20:27




SPECIALISTS


BEADS


BEADS


BEADS

5 Yes QUALIFIED 19/07/2019 10:03:21 04/01/2016 00:00:00


COMPANY

HAMBRIDGE LANE NEWBURY RG14 5TU United Kingdom SURFACETREATMENTSPECIALISTS




expansion





4 Yes QUALIFIED 20/08/2020 14:11:54 14/12/2009 00:00:00


COMPANY





expansion


of metal parts





9 Yes QUALIFIED 20/08/2020 14:11:27 14/12/2009 00:00:00


COMPANY





expansion


of metal parts


REQUIREMENTS


REQUIREMENTS

4 Yes QUALIFIED 20/08/2020 16:06:52 20/08/2020 15:58:49


COMPANY





expansion


of metal parts


of metal parts


of metal parts


20/08/2020 14:11:27 No ultrasonicpeening, no NDT

qualification

20/02/2019 11:01:51


COMPANY



BEADS


BEADS


BEADS

5 Yes QUALIFIED 22/07/2019 16:22:32 14/12/2009 00:00:00


COMPANY


TBD TBD SURFACEIMPROVEMENTUSING ROTARYFLAP PEENING

ABP1-2030 SURFACEIMPROVEMENTUSING ROTARYFLAP PEENING

2 ABP1-2030 SURFACEIMPROVEMENTUSING ROTARYFLAP PEENING

2 Yes QUALIFIED 22/07/2019 16:22:32 14/12/2009 00:00:00

181691 METAL CHROME ZI DU PONT NEUF ROCHEFORTCEDEX




aluminium alloys








aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 12/08/2020 09:47:39 20/12/2013 00:00:00













A3 Yes AUTHORISATIONTO PROCEED WITH

LIMITATIONS

2020-11-30 27/10/2020 16:21:19 Site 1 :QUALIFICATION

GRANTED FOR THE2 TSA TANKS,

LIMITED TO "POSTTREATMENT WITH

ALODINE"Site 4 :

QUALIFICATIONGRANTED FOR THE

2 "DEGREASINGAND TSA TANKS",LIMITED TO "TSAWITHOUT POST

TREATMENT"

700.00 1500.00 900.00 27/11/2015 00:00:00






expansion


of metal parts


of metal parts


of metal parts


02/07/2020 15:25:16 Ultrasonic peeningonly (site principal)

28/05/2019 09:40:02





passivation





16/12/2016 13:56:03 Type I 27/06/2007 00:00:00





passivation





02/07/2020 15:17:07 Site 1 : QUALIFIEDFOR TO TYPE 1 BY

IMMERSIONALODINE 1200 /

FOR TYPE 1 LOCALAPPLICATION

Site 4 : LIMITED TOTYPE 1 LOCALAPPLICATION

09/11/2015 00:00:00






anaerobic compound


anaerobic compound


anaerobic compound


26/02/2020 13:50:47 2050 or 7040 +Anodizing and

bushes Ti6-4 bare orbushes 35NC6 withcadmium plating.

28/05/2019 09:48:49





ADET0039 Sechage acceleredes peintures


06/11/2018 10:11:47 SÉCHAGEACCÉLÉRÉ

THERMORÉACTEUR

SUN KISS

27/06/2007 00:00:00






J IPDA64-02 PEINTUREMANUELLE DESPIECES ELEM

METALL


02/07/2020 16:44:06 Plant 1 and 4qualified

27/02/2017 15:03:24






Paint


Paint


Paint


QUALIFICATIONFOR SITE 1 AND

SITE 4ONLY FOR

METALLIC PARTSSPATULA IS NOT

USED

26/01/2018 11:08:43






systems


systems


systems


14/09/2017 10:41:02 limitation on varnishapplication

14/04/2015 00:00:00



02 Nov 2020 10:51

11/81




ess scope










24/01/2017 17:19:03 Site 1 : QUALIFIEDSite 4 : LIMITED TOMETALLIC PARTS

13/12/2010 00:00:00








parts


parts


20/04/2017 11:05:53 Limited to Metallicparts

25/01/2017 10:15:36








26/02/2020 13:46:27 Sealant beads onbushes only

28/05/2019 09:48:50




03/07/2020 11:12:44 Only for SP4 (case1),SP7, SP8, TP1, TP2

18/05/2015 00:00:00





anodising process



surface resistance)



surface resistance)


27/10/2020 16:23:40 Limited to galvotest 31/10/2016 16:18:12











3 Yes QUALIFIED 28/05/2019 09:58:34 05/04/2019 10:11:04







24/01/2020 15:56:19 Site 1 and 4Qualified.

Site 4 : Limited toALUMINIUM and

Methods "1A2a" and"1A3a"

03/07/2014 00:00:00

181754 TECNATOMFRANCE

RUE DESARTISANS

CHALON SURSAONE CEDEX

71103 France NDT SPECIALISTS Non DestructiveTesting

Ultrasonic Inspection,Ultrasonic, WroughtMetals, Process For

AMS-2154 Inspection,Ultrasonic, WroughtMetals, Process for

D NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

13/09/2018 13:27:20 CLASS AFT N°113 with

relevant DZ all FTsimilar with the FT

mentioned previouslyAUPE single probe

only

LECACYQUALIFICATION

AUDIT REPORTPOLV_NDT_METAL

SCAN_280915

SEE FT N°113 19/01/2018 11:00:17


RUE DESARTISANS



Ultrasonic Test method formetallic materials -

Ultrasonic inspectionof bars, plates,

forging stock andforgings

EN4050 Aerospace series –Test method for

metallic materials -Ultrasonic inspection

of bars, plates,forging stock andforgings – Part 1:

Generalrequirements

NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

06/11/2018 11:12:57 Class 5FT N°163, FT N°164

and all FT similarwith the FT

mentioned previouslySee limitation within

QCS N°170813 issue3

NDI method: AUPE,AUPA

Material Type:ABS5454 stainless

steel plate, ABS5440Inconel 718 plate

Thickness: ABS5454(15-5PH stainless

steel) 6mm…120mm,ABS5440

(PYRAD53NWInconel 718)6mm…30mm

Facility/Equipment:MaxiBacus2

Dead zone: 2 mm

170813 issue2;170813 issue 3

Ultrasonic phasedarray and single

element P/Eins;Ultrasonic phased

array and singleelement P/E ins

Material Type:ABS5454 stainless

steel plate, ABS5440Inconel 718 plate;

Thickness: ABS54546mm…50mm;Material Type: ABS5454

stainless steel plate,ABS5440 Inconel

718 plate;Thickness: ;

ABS5454 (15-5P

19/01/2018 10:48:24


RUE DESARTISANS



Ultrasonic Ultrasonic testing ofmetallic materials

plates, bars,extrusions and

blanks

AITM6-4003 Ultrasonic pulse-echo testing of

metallic materials(plates, bars,

extrusions andblanks)

2 AITM6-4003 Ultrasonic pulse-echo testing of

metallic materials(plates, bars,

extrusions andblanks)


06/11/2018 11:04:24 Class AAFT N°119 with

relevant Dead Zoneand all FT similar

with the FTmentioned previouslyAUPE single probe

only

LEGACYQUALIFICATION

AUDIT REPORTPOLV_NDT_METAL

SCAN_280915

SEE FTMENTIONED IN THE

LIMITATIONS

19/01/2018 10:53:26


RUE DESARTISANS



Ultrasonic Ultrasonic testing ofmetallic materials:


blanks

IGC04-25-115 CONTROLE PARULTRASONS DESproduits ET sEMI

PRODUITSMETALLIQUES

(épaisseur > 6mm)

B NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

06/11/2018 11:29:23 Class AALimitation within QCS

N°180073 issue 3:NDI method: AUPE,

AUPAMaterial Type: X15-

U5W platesFacility/Equipment:

MaxiBacus2Dead zone: 1.5mm;

quality class: AAThickness: 5 mm up

to 120 mmFT N°165 and FTN°178 or similar

Limitation withinQCS181374 issue 1NDI method: AUPE,

AUPAMaterial Type:

MarvalX12 stainlesssteel plates & barsFacility/Equipment:

MaxiBacus2Dead zone: 1.5mm;

quality class: AAThickness: 7 mm upto 28 mm (FT-174); 3

mm up to 133 mm(FT-184)

180073 issue3;181374

Automated ultrasonicphased array and

singleeleme;Automated

ultrasonic pulse echoand phased array p

NDI method: AUPE,AUPA;

Material Type: X15-U5W plates;

Dead zone: 1.5mm;quality class: AA;Thicknes;MaterialType: MarvalX12

stainless steel plates& bars;

Dead zone: 1.5mm;quality class: AA;

Thickne

24/01/2018 16:08:21

183193 MORGAN WARDNDT LTD

DALE ROAD NEWMILLS

HIGH PEAK SK22 4NW United Kingdom NDT SPECIALISTS Non DestructiveTesting

Ultrasonic TESTING BYULTRASONIC FLAW

DETECTION

ABP6-5232 TESTING BYULTRASONIC FLAW

DETECTION

8 ABP6-5232 TESTING BYULTRASONIC FLAW

DETECTION

6 Yes QUALIFIED 25/09/2018 09:50:12 NO NO 29/10/2012 00:00:00

184292 TESTIA SAS 18 RUE MARIUSTERCE

TOULOUSE 31300 France NDT SPECIALISTSCS-001-5 SPECIAL

MAINTENANCESERVICES GP-2-

215 TEST JIGSEQUIPMENT GP-3-213B INDUSTRIAL

SERVICES SAT-1-3SATAIR TOOLS


Eddy Current Cladding thicknessmeasurement by

high frequency eddycurrent

AITM6-6002 Mesure par courantsde Foucault à haute

fréquence del¿épaisseur restantede revêtement après

ragréage

2 AITM6-6002 Mesure par courantsde Foucault à haute

fréquence del¿épaisseur restantede revêtement après

ragréage


13/09/2018 13:27:20 Device:Defectometer 1.837

from Foerster /Probe: NFe 2MHz /Material: Aluminium

2024 T42 /Thickness: from 1.6to 6.0mm / Surfacetype: Flat or slightly

curved / Surfaceprotection: Cladding

QCS170096 Qualification forTestia Toulouse forNDT inspection ofremaining claddingthickness by HFEC

after b

Device:Defectometer 1.837

from Foerster /Probe: NFe 2MHz /Material: Aluminium2024 T42 / Thicknes

21/12/2017 09:50:06







Eddy Current Eddy current forsurface crack

detection

AITM6-6003 Détection parcourants de Foucault

des criques desurface dans les

matériauxconducteursd¿électricité

3 AITM6-6003 Détection parcourants de Foucault



3 Yes QUALIFIED 13/09/2018 13:28:28 02/02/2018 11:11:30







Eddy Current Rotating Probe EddyCurrent Inspection

AITM6-6005 Contrôle parcourants de Foucault

à l¿aide d¿unesonde rotative

1 AITM6-6005 Contrôle parcourants de Foucault


1 Yes QUALIFIED 13/09/2018 13:28:30 19/03/2018 14:29:28










No capability toperform pre-

penetrant etch

27/05/2020 15:05:33














17/12/2019 08:48:30 Except inspection ofparts made by

AdditiveManufacturing –

Powder Bed Fusion

03/09/2014 00:00:00








X-Ray Inspectionusing Digital Detector

Arrays

AITM6-7007 X-ray InspectionUsing Digital

Detector Arrays

2 AITM6-7007 X-ray InspectionUsing Digital

Detector Arrays


19/11/2019 11:39:04 NDI method digitalradiography

inspection (AITM6-7007) of Inconel 718

AM powder bedcomponents

materials Inconel 718part build up additive

manufacturing(powder bed

process)

191009 Qualification for NDT,Testia, Toulouse,

france AI

Qualification for NDT,Testia, Toulouse,france for DED

componentsinspection according

to AITM6-700

19/11/2019 11:38:16



02 Nov 2020 10:51

12/81




ess scope








Resonance Tap-test AITM6-5003 Essai parTapotement `Tap

test¿

6 AITM6-5003 Essai parTapotement `Tap

test¿

6 Yes QUALIFIED 13/09/2018 13:28:30 19/03/2018 14:23:48







Ultrasonic Thicknessmeasurement of fibre

composites by UTpulse-echo technique

AITM6-4014 Mesure de lépaisseur des

composites à fibrepar la méthodeéchographique

ultrasonore

5 AITM6-4014 Mesure de lépaisseur des


ultrasonore

5 Yes QUALIFIED 13/09/2018 13:28:30 19/03/2018 14:14:29







Ultrasonic Thicknessmeasurement of

metals by US pulse-echo technique

AITM6-4016 Mesure de lépaisseur desmétaux par la

méthodeéchographique

ultrasonore

3 AITM6-4016 Mesure de lépaisseur desmétaux par la


ultrasonore

3 Yes QUALIFIED 13/09/2018 13:28:30 19/03/2018 14:12:16

184362 NEHLSEN-BWBFLUGZEUG-GALVANIK

DRESDEN GMBHCO KG

GRENZSTR. 2 DRESDEN 1109 Germany SURFACETREATMENTSPECIALISTS




Titanium Alloys


Titanium Alloys

Yes QUALIFIED 15/11/2017 09:59:49 02/09/2009 00:00:00


DRESDEN GMBHCO KG




AIPS02-01-004 Anodizing ofTitanium and its

alloys

2 AIPI02-01-004 Anodizing ofTitanium and its

alloys

2 Yes QUALIFIED 15/11/2017 10:10:42 19/09/2012 00:00:00


DRESDEN GMBHCO KG




aluminium alloys



Yes QUALIFIED 15/11/2017 09:59:49 01/11/2010 00:00:00


DRESDEN GMBHCO KG




aluminium alloys


aluminium alloys

2 80-T-35-2100 Chromic AcidAnodizing



SCOPE &LIMITATIONS



01/11/2010 00:00:00


DRESDEN GMBHCO KG



02-01 Anodizing Hard anodizing ofaluminium alloys

80-T-35-2200 Hard Anodizingh 80-T-35-2200 Hard Anodizingh Yes QUALIFIED 15/11/2017 09:59:49 01/11/2010 00:00:00


DRESDEN GMBHCO KG




AIPS02-01-005 Hard Anodizing ofaluminium alloys

2 AIPI02-01-005 Hard Anodizing ofaluminium alloys

1 Yes QUALIFIED 15/11/2017 10:10:42 19/09/2012 00:00:00


DRESDEN GMBHCO KG




aluminium alloys


Sealing


Sealing

Yes QUALIFIED 15/11/2017 09:59:48 01/11/2010 00:00:00


DRESDEN GMBHCO KG




aluminium alloys

80-T-35-2001 Sealing of AnodizedLayers


Yes QUALIFIED 15/11/2017 09:59:49 01/11/2010 00:00:00


DRESDEN GMBHCO KG




aluminium alloys

80-T-35-2002 DC Sulphuric AcidColor Anodizing with

Sealing


Sealing

Yes QUALIFIED 15/11/2017 09:59:49 02/09/2009 00:00:00


DRESDEN GMBHCO KG




aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 26/10/2016 13:09:35 16/01/2014 00:00:00


DRESDEN GMBHCO KG






80-T-35-2010 Tartaric/Sulfuric AcidAnodizing of

Aluminum Alloys


Aluminum Alloys


26/10/2016 13:04:11 WITHOUTBRIGHTENING

08/12/2011 00:00:00


DRESDEN GMBHCO KG












A3 Yes QUALIFIED 26/10/2016 13:09:36 19/11/2015 00:00:00


DRESDEN GMBHCO KG





expansion



Yes QUALIFIED 13/09/2019 11:06:16 01/11/2010 00:00:00


DRESDEN GMBHCO KG





expansion



DRESDEN GMBHCO KG





expansion


of metal parts

80-T-35-0205 Shot Peening 80-T-35-0205 Shot Peening Yes QUALIFIED 15/11/2017 09:59:48 14/03/2016 11:57:38


DRESDEN GMBHCO KG





expansion


of metal parts


of metal parts


of metal parts

A3 Yes QUALIFIED 22/03/2017 15:28:33 14/05/2013 00:00:00


DRESDEN GMBHCO KG





expansion

Wet blasting 80-T-35-0204 Abrasive Blasting -Vapour Lapping -

80-T-35-0204 Abrasive Blasting -Vapour Lapping -

Yes QUALIFIED 15/11/2017 09:59:48 14/03/2016 11:50:21


DRESDEN GMBHCO KG




agents


Plating

80-T-35-4300 Chemical Nickel -Plating of Steel


Yes QUALIFIED 15/11/2017 09:59:50 14/03/2016 12:06:55


DRESDEN GMBHCO KG




agents






Yes QUALIFIED 15/11/2017 09:59:48 01/11/2010 00:00:00


DRESDEN GMBHCO KG




agents




Yes QUALIFIED 15/11/2017 09:59:49 01/11/2010 00:00:00


DRESDEN GMBHCO KG




agents




Yes QUALIFIED 15/11/2017 09:59:49 01/11/2010 00:00:00


DRESDEN GMBHCO KG




agents




Yes QUALIFIED 13/09/2019 11:29:40 02/09/2009 00:00:00



02 Nov 2020 10:51

13/81




ess scope



DRESDEN GMBHCO KG




agents



5 80-T-35-1107 ChromiumPassivation of




SCOPE &LIMITATIONS



01/11/2010 00:00:00


DRESDEN GMBHCO KG




agents



5 80-T-35-3000 Cadmium¿Plating ofSteel



SCOPE &LIMITATIONS



01/11/2010 00:00:00


DRESDEN GMBHCO KG




agents



5 80-T-35-3003 Cadmium - Plating ofCopper Alloys



SCOPE &LIMITATIONS



01/11/2010 00:00:00


DRESDEN GMBHCO KG




agents



5 80-T-36-3300 Dehydrogenation ofSteels



SCOPE &LIMITATIONS



02/09/2009 00:00:00


DRESDEN GMBHCO KG




passivation




Yes QUALIFIED 15/11/2017 09:59:48 01/11/2010 00:00:00


DRESDEN GMBHCO KG




passivation


80-T-35-9124 Repair of PaintCoatings on Metallic

and Non-MetallicSurfaces



Yes QUALIFIED 15/11/2017 10:10:41 16/01/2008 00:00:00


DRESDEN GMBHCO KG




passivation




2 Yes QUALIFIED 22/03/2017 15:28:33 14/05/2013 00:00:00


DRESDEN GMBHCO KG




passivation


Steel


Steel


Steel

2 Yes QUALIFIED 26/10/2016 13:09:38 04/06/2015 00:00:00


DRESDEN GMBHCO KG




passivation



80-T-35-0104 Pickling of Stainless,Austenitic Steel


Yes QUALIFIED 12/12/2019 10:58:24 31/07/2012 00:00:00


DRESDEN GMBHCO KG




passivation



80-T-35-0194 Pickling ofMartensitic Steels


Yes QUALIFIED 13/09/2019 10:59:22 31/07/2012 00:00:00


DRESDEN GMBHCO KG




passivation




Stählen


Stählen

Yes QUALIFIED 15/11/2017 09:59:48 02/09/2009 00:00:00


DRESDEN GMBHCO KG




passivation




Stählen

AIPI02-05-005 Passivation ofCorrosion Resistant

Steel

2 Yes QUALIFIED 13/03/2018 14:30:33 18/11/2016 13:41:51


DRESDEN GMBHCO KG




passivation







Yes QUALIFIED 15/11/2017 09:59:48 02/09/2009 00:00:00


DRESDEN GMBHCO KG




passivation






Steel


13/03/2018 14:30:33 1.3544 shall receivea supplementarytreatment (to be

confirmed by specificdesign).

18/11/2016 13:45:52


DRESDEN GMBHCO KG




passivation

Phosphating of steel 80-T-35-1000 Phosphating 80-T-35-1000 Phosphating Yes QUALIFIED 15/11/2017 09:59:48 01/11/2010 00:00:00


DRESDEN GMBHCO KG




passivation

Phosphating of steel AIPS02-05-004 Phosphating of Steel 2 AIPI02-05-004 Phosphating of Steel 1 Yes QUALIFIED 22/03/2017 15:28:33 14/05/2013 00:00:00


DRESDEN GMBHCO KG



03-07 Composites,non-structural

Pretreatment ofPlastic Parts

PEEKfor Bonding

80-T-35-0134 Pretreatment ofPlastic Parts (PEEK)

for Bonding

80-T-35-0134 Pretreatment ofPlastic Parts (PEEK)

for Bonding

Yes QUALIFIED 13/09/2019 11:34:36 16/01/2008 00:00:00


DRESDEN GMBHCO KG



Heat treatment ofsolid rivets

80-T-34-5804 Treatment of SolidAluminum Rivets

Prior to Installation

80-T-34-5804 Treatment of SolidAluminum Rivets

Prior to Installation

Yes QUALIFIED 13/09/2019 11:38:38 05/08/2008 00:00:00


DRESDEN GMBHCO KG





base d'époxy)


base d'époxy)

Yes QUALIFIED 15/11/2017 09:59:50 01/11/2010 00:00:00


DRESDEN GMBHCO KG




80-T-35-5008 Coating with Two -Component

Polyurethane Primer


Polyurethane Primer

Yes QUALIFIED 15/11/2017 09:59:50 02/09/2009 00:00:00


DRESDEN GMBHCO KG




80-T-35-5023 Coating withTwo¿Component

EP¿basedPrimer,Chromate¿fre

e



e

Yes QUALIFIED 15/11/2017 09:59:50 02/09/2009 00:00:00


DRESDEN GMBHCO KG





Chromate - free


Chromate - free

Yes QUALIFIED 15/11/2017 09:59:50 02/09/2009 00:00:00


DRESDEN GMBHCO KG




Application of antislipEmergencyWalkawa

y Paint

80-T-35-5212 Coating with Anti -Slip Paint


Yes QUALIFIED 15/11/2017 10:10:40 02/09/2009 00:00:00


DRESDEN GMBHCO KG





80-T-35-5256 Coating withConductive Paint


Yes QUALIFIED 15/11/2017 10:10:40 14/03/2016 12:09:07


DRESDEN GMBHCO KG






General


General

Yes QUALIFIED 15/11/2017 10:10:41 01/11/2010 00:00:00


DRESDEN GMBHCO KG










4 Yes QUALIFIED 26/10/2016 13:09:35 15/04/2014 00:00:00



02 Nov 2020 10:51

14/81




ess scope



DRESDEN GMBHCO KG




Application ofcorrosion inhibitingcoating on externalunpainted erosionprone aluminium

surfaces

AIPS05-02-017 Application ofcorrosion inhibitingcoating on externalunpainted erosionprone aluminium

surfaces

2 AIPI05-02-017 Application ofcorrosion inhibitingcoating on externalunpainted erosionprone aluminium

surfaces

A0 Yes QUALIFIED 22/10/2019 11:58:36 06/05/2015 00:00:00


DRESDEN GMBHCO KG





Paint

80-T-35-9123 Paint Coating inInterior Furnishing


Yes QUALIFIED 15/11/2017 10:10:41 02/09/2009 00:00:00


DRESDEN GMBHCO KG





systems

80-T-35-5000 Coating with WashPrimer


Yes QUALIFIED 15/11/2017 09:59:50 02/09/2009 00:00:00


DRESDEN GMBHCO KG





systems

80-T-35-5254 Coating with Pur-Based Varnish

Abrasion-Resistant


Abrasion-Resistant

Yes QUALIFIED 15/11/2017 10:10:40 02/09/2009 00:00:00


DRESDEN GMBHCO KG





80-T-35-5024 Coating with Two-component Primer,

EP-based, ChromateFree



Yes QUALIFIED 15/11/2017 09:59:50 02/09/2009 00:00:00


DRESDEN GMBHCO KG









Yes QUALIFIED 26/10/2016 13:04:12 21/11/2014 00:00:00


DRESDEN GMBHCO KG









Yes QUALIFIED 15/11/2017 09:59:51 02/09/2009 00:00:00


DRESDEN GMBHCO KG









Yes QUALIFIED 26/10/2016 13:09:34 21/11/2014 00:00:00


DRESDEN GMBHCO KG





80-T-35-9030 Application of Fillers 80-T-35-9030 Application of Fillers Yes QUALIFIED 12/12/2019 10:59:28 16/01/2008 00:00:00


DRESDEN GMBHCO KG







A3 Yes QUALIFIED 26/10/2016 13:09:39 15/09/2011 00:00:00


DRESDEN GMBHCO KG



05-03 Stripping ofpaint

Chemical stripping ofaircraft external paint

system andrepainting

80-T-35-9125 Removal of OrganicCoatings


Yes QUALIFIED 15/11/2017 10:10:41 16/01/2008 00:00:00


DRESDEN GMBHCO KG


06 Bonding 06-01 Pre-treatment Etching of polyamideadherends prior toadhesive bonding

80-T-35-0131 Pretreatment ofPolyamide for

Bonding

80-T-35-0131 Pretreatment ofPolyamide for

Bonding

Yes QUALIFIED 13/09/2019 11:32:44 14/03/2016 11:33:54


DRESDEN GMBHCO KG


06 Bonding 06-01 Pre-treatment Mechanical surfacepreparation of non-structural adherend

prior to adhesivebonding

80-T-35-0130 Pretreatment of Non-structural Joints for

Bonding

80-T-35-0130 Pretreatment of Non-structural Joints for

Bonding

Yes QUALIFIED 26/10/2016 13:04:10 21/11/2013 00:00:00


DRESDEN GMBHCO KG







Yes QUALIFIED 15/11/2017 09:59:46 01/11/2010 00:00:00


DRESDEN GMBHCO KG




80-T-35-0106 Pickling of Titaniumand Titanium Alloys -

Acid -


Acid -

Yes QUALIFIED 22/10/2019 11:57:15 01/11/2010 00:00:00


DRESDEN GMBHCO KG






3 Yes QUALIFIED 13/09/2019 11:30:38 20/04/2015 00:00:00


DRESDEN GMBHCO KG




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 13/09/2019 11:26:13 NA NA 08/12/2011 00:00:00


DRESDEN GMBHCO KG












DRESDEN GMBHCO KG


TBD TBD Beschichten mitEinschichtlack

80-T-35-5100 Beschichten mitEinschichtlack

80-T-35-5100 Beschichten mitEinschichtlack

Yes QUALIFIED 15/11/2017 09:59:51 16/01/2008 00:00:00


DRESDEN GMBHCO KG


TBD TBD Coating of TankCompartments

Fungicide

80-T-35-5107 Coating of TankCompartments

Fungicide

80-T-35-5107 Coating of TankCompartments

Fungicide

Yes QUALIFIED 22/10/2019 11:59:34 02/09/2009 00:00:00


DRESDEN GMBHCO KG


TBD TBD Coating with two-component EP-

based top varnish

80-T-35-5101 Coating with two-component EP-

based top varnish

80-T-35-5101 Coating with two-component EP-

based top varnish

Yes QUALIFIED 15/11/2017 09:59:51 02/09/2009 00:00:00


DRESDEN GMBHCO KG


TBD TBD Electrolytic Copper -Plating of Steels andNon - Ferrous Heavy

Metals

80-T-35-3301 Electrolytic Copper -Plating of Steels andNon - Ferrous Heavy

Metals

80-T-35-3301 Electrolytic Copper -Plating of Steels andNon - Ferrous Heavy

Metals

Yes QUALIFIED 15/11/2017 09:59:49 14/03/2016 12:00:42


DRESDEN GMBHCO KG


TBD TBD Electrolytic Nickel -Plating

80-T-35-3302 Electrolytic Nickel -Plating

80-T-35-3302 Electrolytic Nickel -Plating

Yes QUALIFIED 15/11/2017 09:59:50 14/03/2016 12:03:42


DRESDEN GMBHCO KG


TBD TBD Pickling of Carbonand Low - Alloy

Steels

80-T-35-0103 Pickling of Crabonand Low - Alloy

Steels

80-T-35-0103 Pickling of Crabonand Low - Alloy

Steels

Yes QUALIFIED 13/09/2019 10:55:52 16/01/2008 00:00:00


DRESDEN GMBHCO KG



184891 NITRUVID 9, RUE JEANPOULMARCH

ARGENTEUIL 95100 France SURFACETREATMENTSPECIALISTS




expansion

Dry blasting IPDA66-06 SABLAGE A SECDES METAUX

DURS

A0 IPDA66-06 SABLAGE A SECDES METAUX

DURS

A0 Yes QUALIFIED 14/11/2019 10:09:34 08/01/2018 10:23:31

184891 NITRUVID 9, RUE JEANPOULMARCH


TBD TBD Ionic nitriding ofsteels

ADET0127 Nitruration ioniquedes aciers faiblement

allies


185462 NU PRO SURFACETREATMENTS LTD

EAGLE WORKSLONDON ROAD

THRUPP

STROUD GL5 2BA United Kingdom SURFACETREATMENTSPECIALISTS




press fit

ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER

FASTENING PARTS

2 ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER

FASTENING PARTS

2 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



02 Nov 2020 10:51

15/81




ess scope




THRUPP





for fastening


HOLES INMETALLIC

MATERIALS


HOLES INMETALLIC

MATERIALS

1 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




ABP1-1022 HARD ANODISINGOF ALUMINIUM

2-1 ABP1-1022 HARD ANODISINGOF ALUMINIUM

2-1 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP





expansion





4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




agents






3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




agents




2 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




passivation



3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP





ABP4-2125 APPLICATION OFANTI-STATIC PAINTTO COMPOSITES

EXCLUDINGCARBON FIBRE

5 ABP4-2125 APPLICATION OFANTI-STATIC PAINTTO COMPOSITES


5 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP










4 Yes QUALIFIED 09/09/2020 09:27:11 18/02/2010 00:00:00



THRUPP





systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP





systems







18 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP





systems











11 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP





systems

ABP4-2133 APPLICATION OFEROSION

RESISTANT PAINT

8 ABP4-2133 APPLICATION OFEROSION

RESISTANT PAINT

8 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 09/09/2020 09:28:20 18/02/2010 00:00:00



THRUPP





ABP4-1352 APPLICATION OFCHROMATE-FREE

PRIMER AS ASEALING COATFOR A380 WING

TRANSPORTATION

2-1 ABP4-1352 APPLICATION OFCHROMATE-FREE


TRANSPORTATION

2-1 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP









16 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP





D¿ETANCHEITESUR LA


L¿AVION


D¿ETANCHEITESUR LA


L¿AVION

16 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



THRUPP




materials






THRUPP




materials







5 Yes QUALIFIED 29/10/2018 16:37:00 29/10/2018 09:33:11



THRUPP




ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION




THRUPP




ETCH INSPECTION


inspection


inspection

2 Yes QUALIFIED 26/10/2016 13:14:08 NU PROPROCEDURE QC

NU PROPROCEDURE

QC237 ISSUE E

21/03/2012 00:00:00



THRUPP






Detection




THRUPP




DETECTION




THRUPP





12 Yes QUALIFIED 30/04/2020 12:09:30 28/03/2014 00:00:00



THRUPP



ALLOYS


ALLOYS

7 ABP8-1296 DEOXIDATION OFALUMINIUM

ALLOYS

7 Yes QUALIFIED 20/04/2020 09:25:50 12/03/2014 00:00:00



02 Nov 2020 10:51

16/81




ess scope




THRUPP









30/10/2018 09:39:40 Limited to Method 6only.

29/10/2018 09:07:40



THRUPP


TBD TBD ZINC PLATING OFSTEELS COPPER

ALLOYS

ABP1-4043 ZINC PLATING OFSTEELS & COPPER

ALLOYS

2 ABP1-4043 ZINC PLATING OFSTEELS & COPPER

ALLOYS

2 Yes AUTHORISATIONTO PROCEED WITH

LIMITATIONS

2020-12-31 30/04/2020 12:04:01 Methods 4, 5 and 8 29/11/2019 09:13:27

186000 OMA OFFICINEMECCANICHE

AERONAUTIQUE

VIA CAGLIARI, 20 FOLIGNO PERUGIA 6034 Italy SURFACETREATMENT

SPECIALISTS DIV-001-7 ATR GIE




for fastening

ADET0078 Rivetagesstructuraux

K IPDA71-12 RIVETAGES DESASSEMBLAGESMETALLIQUES


14/11/2019 10:13:44 ONLY MANUALRIVETING

ONLY ALUMINIUMRIVETS

16/12/2013 00:00:00


AERONAUTIQUE





passivation





02/04/2020 13:13:50 ONLY 2000 series 10/11/2016 08:48:38


AERONAUTIQUE





passivation





02/04/2020 13:13:51 ONLY FOR LOCALAPPLICATION WITH

ALODINE 1200S

27/06/2014 00:00:00


AERONAUTIQUE






Parts


07/01/2020 16:26:58 ONLY 2000 SERIES 29/01/2013 00:00:00


AERONAUTIQUE




14/11/2019 10:13:43 ONLY SURFACEPREPARATION SP1

& SP7 (EXCEPTREFRESH

OPERATION)

23/05/2014 00:00:00


AERONAUTIQUE





materials








07/01/2020 16:24:11 ONLY 2000 SERIES QFRA/TR/12P.054 QFRA/TR/12P.054 29/01/2013 00:00:00

188678 PMA PROTECMETAUX D ARENC

GROUPE BONNANS

540 CHEMIN DE LAMADRAGUE

MARSEILLE CEDEX15




ADET0084 Oxydation anodiquesulfurique du titane etde ses alliages ( sauf

fixations )

D NO_AIRBUS_PI Yes QUALIFIED 30/05/2016 09:10:48 27/11/2015 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15





alloys


alloys


limitation for paintingparts (sealing

operation is notapplied §3.9)

31/05/2016 16:45:25


GROUPE BONNANS


MARSEILLE CEDEX15




aluminium alloys


aluminium alloys



GROUPE BONNANS


MARSEILLE CEDEX15




ADET0097 Oxydation anodiquedure des alliages daluminium corroyes

E NO_AIRBUS_PI Yes QUALIFIED 30/05/2016 09:24:04 06/01/2016 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15












A3 Yes QUALIFIED 16/03/2020 10:18:43 07/07/2016 09:31:40


GROUPE BONNANS


MARSEILLE CEDEX15




agents




26/10/2016 13:18:34 TYPE I, II, III STEELWITH R < 1450 MPA

13/03/2008 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15




passivation






GROUPE BONNANS


MARSEILLE CEDEX15




passivation




2 Yes QUALIFIED 31/05/2016 16:38:13 27/11/2015 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15




passivation


Steel


Steel


Steel

2 Yes QUALIFIED 30/05/2016 09:32:30 27/11/2015 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15




passivation




austenitiques



GROUPE BONNANS


MARSEILLE CEDEX15




passivation




06/04/2020 15:23:33 Stainless Steel R <1450 MPA only

13/03/2008 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15




passivation


30/05/2016 09:36:02 Limitation: For typeM (Heavy

Manganese) andType L (Light

Phosphate) only.

06/04/2016 09:27:17


GROUPE BONNANS


MARSEILLE CEDEX15






28/05/2019 09:23:59 TYPE I ET IIUNIQUEMENT ETACIER R < 1450MPA; ACIER R <

1450 MPA

13/03/2008 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15





systems


systems


systems


27/07/2017 15:15:21 only for varnishapplication

27/07/2017 15:12:46


GROUPE BONNANS


MARSEILLE CEDEX15








16/03/2020 10:50:46 METALLIC PARTSONLY

27/07/2015 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15






3 Yes QUALIFIED 16/03/2020 10:38:44 27/11/2015 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15







4 Yes QUALIFIED 26/10/2016 13:18:35 13/03/2015 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15






MAGNETOSCOPIE



GROUPE BONNANS


MARSEILLE CEDEX15






26/10/2016 13:18:35 S2-S3 NA NA 27/11/2015 00:00:00


GROUPE BONNANS


MARSEILLE CEDEX15


TBD TBD Electrolytic silverplating of stainlesssteels and copper

alloys

ADET0163 Argentureelectrolytique des

aciers inoxydables etalliages de cuivre

B NA Yes QUALIFIED 13/02/2018 14:58:16

188741 POETON CARDIFFLTD

PENARTH ROAD CARDIFF CF11 8UL United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00





aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00













A3 Yes QUALIFIED 26/10/2016 13:22:13 18/07/2011 00:00:00






expansion





4 Yes QUALIFIED 01/09/2020 11:39:09 14/12/2009 00:00:00






expansion




02 Nov 2020 10:51

17/81




ess scope







expansion

Wet blasting AIPS02-02-003 Wet blasting 3 AIPI02-02-003 Wet blasting A1 Yes QUALIFIED 26/10/2016 13:22:13 27/11/2015 00:00:00





agents






3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00





agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00





passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00





passivation




2 Yes QUALIFIED 26/10/2016 13:22:13 21/07/2011 00:00:00





passivation



3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00







OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






y Paint

ABP4-2361 APPLICATION OFANTI-SLIP

EMERGENCY /WALKWAY PAINTS

1 ABP4-2361 APPLICATION OFANTI-SLIP


1 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00











4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






systems







18 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






systems











11 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






systems


RESISTANT PAINT


RESISTANT PAINT

8 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






systems







8 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






systems


systems


systems


26/10/2016 13:22:14 THE USE OF AVIOXCLEARCOAT UVR

ONLY

23/09/2015 00:00:00





APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00








TRANSPORTATION



TRANSPORTATION

2-1 Yes QUALIFIED 11/10/2019 16:26:44 14/12/2009 00:00:00










16 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00








A3 Yes QUALIFIED 26/10/2016 13:22:14 21/07/2011 00:00:00








parts


parts

2 Yes QUALIFIED 26/10/2016 13:22:14 23/09/2015 00:00:00





Paint stripping byplastic media blasting

AIPS05-03-001 Paint stripping byplastic media blasting

3 NA Yes QUALIFIED WITHLIMITATIONS

24/03/2020 15:21:32 removal of DFLcoating only(NCF0424)

27/11/2015 00:00:00




22/10/2019 12:00:50 Masking Only. 26/01/2017 12:54:34





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 14/09/2020 13:29:28 14/09/2020 13:28:41





materials








ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION








Detection









4 Yes QUALIFIED 26/10/2016 13:23:22 26/05/2015 00:00:00





DETECTION







12 Yes QUALIFIED 19/11/2018 15:02:11 26/05/2015 00:00:00



02 Nov 2020 10:51

18/81




ess scope


189146 PRAXAIR ETS 42 ALLEE JULESBIGOT

SAINT ETIENNE 42043 France SURFACETREATMENTSPECIALISTS




80-T-35-4100 Flame Spraying 80-T-35-4100 Flame Spraying Yes QUALIFIED WITHLIMITATIONS




05/05/2009 00:00:00






ADET0075 Revetement anti-usure ( type carburede tungstene ) pour

aciers, alliages daluminium et alliages

de titane


05/02/2019 10:31:16 REVÊTEMENTLWIN40 SUR

SUPPORTS TITANEET ACIERS

INOXYDABLESREVÊTEMENT LW5

SUR SUPPORTSACIERS ET

ALLIAGES L1047

17/06/2009 00:00:00






AIPS02-03-001 Application ofthermal spray

coatings WC-Co andWC-Co-Cr

3 NO_AIRBUS_PI Yes AIPS/AITMCOMPLIANT WITH

LEGACYQUALIFICATION

05/02/2019 10:31:15 17/06/2009 00:00:00




02-03 Deposition Application ofthermally sprayedCobalt Chromium

Molybdenumcoatings

AIPS02-03-007 Application ofthermally sprayedCobalt Chromium

Molybdenumcoatings


05/02/2019 10:31:15 QCS 150875.Qualified Booth:

PlasmaP2 - IncludingDEGREASING,

BLASTING,DEPOSITIONCOATING and

GRINDING WITHDIAMOND WHEELS

13/09/2016 16:13:37




02-03 Deposition Copper alloy coatingof titanium and

stainless steel alloysby thermal spaying

AIPS02-03-002 Copper alloy coatingof titanium and

stainless steel alloysby thermal spraying

2 80-T-35-4100 Flame Spraying Yes AIPS/AITMCOMPLIANT WITH

LEGACYQUALIFICATION

05/02/2019 10:31:15 05/05/2009 00:00:00




02-03 Deposition Copper AluminiumIron alloy coating of

titanium andstainless steel alloys

by flame thermalspraying

AIPS02-03-008 Copper AluminiumIron alloy coating of

titanium andstainless steel alloys

by flame thermalspraying








Process

2 80-T-35-4100 Flame Spraying Yes AIPS/AITMCOMPLIANT WITH

LEGACYQUALIFICATION

05/02/2019 10:31:15 05/05/2009 00:00:00






12 Yes QUALIFIED 05/02/2019 10:31:16 07/11/2012 00:00:00

189148 PRAXAIR SURFACETECHNOLOGIES

GMBH

ROBERT-ZAPP-STR. 7

RATINGEN 40880 Germany SURFACETREATMENTSPECIALISTS






3 NO_AIRBUS_PI Yes AUTHORISATIONTO PROCEED WITH

LIMITATIONS

2020-12-25 02/09/2020 16:18:41 QCS100972. Limitedto WCCo coatingsidentified as SDG-2003 sprayed onto

Stainless Steelsusing the Super D-

Gun.

QCS100972 Application ofthermal spray

coatings Wc-Co andWc

Thermal Spraycoatings of Wc-Co on

stainless steels.Commercial name of

qualifiedcoating/spraying e

17/09/2014 00:00:00

189531 SATYS SURFACETREATMENTTOULOUSE

84 ROUTE DESEILH - LAPAQUIERE

CORNEBARRIEU 31700 France SURFACETREATMENTSPECIALISTS



aluminium alloys







17/03/2008 00:00:00






aluminium alloys


aluminium alloys


27/02/2019 15:06:14 BAINS 16UNIQUEMENT

10/12/2007 00:00:00














A3 Yes AUTHORISATIONTO PROCEED

2020-11-04 15/10/2020 12:04:40 06/06/2014 00:00:00







expansion







agents




27/02/2019 15:06:15 ACIER R < ET >1450 MPA

11/06/2002 00:00:00






agents

Pad cadmium platingof steels

ADET0167 Cadmiage au tampondes aciers

D IPDA62-28 CADMIAGE AUTAMPON DES

ACIERS (R <1450MPa)


27/02/2019 15:06:14 SIFCO CODE 3002 20/06/2017 13:20:06






passivation




2 Yes QUALIFIED 27/02/2019 15:06:15 09/09/2015 00:00:00






passivation









passivation


Steel


Steel


Steel

2 Yes QUALIFIED 27/02/2019 15:06:15 10/01/2011 00:00:00






passivation





Yes QUALIFIED 13/10/2020 08:14:36 05/02/2015 00:00:00






passivation







Yes QUALIFIED 27/02/2019 15:06:13 05/02/2015 00:00:00






passivation






Steel

2 Yes QUALIFIED 27/02/2019 15:06:13 05/01/2017 17:06:55






passivation




austenitiques









METALL

A5 Yes QUALIFIED 27/02/2019 15:06:13 18/12/2015 00:00:00






ADET0092 Peinture des pieceselementaires encomposite ( horsamenagementcommercial )

F NO_AIRBUS_PI Yes QUALIFIED 27/02/2019 15:06:13 03/12/1998 00:00:00







systems


systems


systems

A2 Yes QUALIFIED 27/02/2019 15:06:15 10/01/2011 00:00:00









A3 Yes QUALIFIED 19/08/2019 16:03:56 19/01/2012 00:00:00









parts


parts


28/07/2020 11:35:54 limited on metallicparts only.

28/07/2020 11:35:27







ADET0116 Decapage depeinture des pieces

elementaires parprojection de

particules plastiqueset remise en peinture

B IPDA66-04 DECAPAGE PARPROJECT

PARTICULESPLASTIQUES


27/02/2019 15:06:13 Only total strippinguntil aluminium

support.

14/04/2017 15:14:05





28/07/2020 10:32:21 ONLY FOR TP1 &TP2 “PROTECTION

INMANUFACTURING

PERIOD”

02/02/2018 15:38:10



02 Nov 2020 10:51

19/81




ess scope










26/04/2019 17:51:27 limited to etchingprior FPI.

10/01/2011 00:00:00





09-03 Chemicalcontouring

Chemical milling oftitanium alloys

80-T-33-3515 Chemical Milling ofTitanium and

Titanium alloys

80-T-33-3515 Chemical Milling ofTitanium and

Titanium alloys





17/03/2008 00:00:00







ADET0160 Usinage chimiquedes alliages de titane


27/02/2019 15:06:14 CLASSES 3-2S+2SREF D531 11096

06/02/2001 00:00:00







AIPS09-03-002 Chemical milling oftitanium alloys

2 AIPI09-03-002 Chemical milling oftitanium alloys

1 Yes QUALIFIED 27/02/2019 15:06:16 23/01/2013 00:00:00

















MAGNETOSCOPIE








12 Yes QUALIFIED 27/02/2019 15:06:16 24/06/2010 00:00:00

192605 ROEDERPRAEZISION GMBHMASCHINENFABRI

K

AM FLUGPLATZ EGELSBACH 63329 Germany SURFACETREATMENTSPECIALISTS



Electron beamwelding of hard metal

80-T-34-6900 Electro - BeamWelding

80-T-34-6900 Electro - BeamWelding

Yes QUALIFIED 13/08/2020 13:25:34 09/12/2009 00:00:00


K





Titanium Alloys


Titanium Alloys

Yes QUALIFIED 13/08/2020 13:25:34 09/12/2009 00:00:00


K




aluminium alloys





WORKBENCHONLY

04/04/2013 00:00:00


K




aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 13/08/2020 13:25:34 18/02/2010 00:00:00


K




agents






Yes QUALIFIED 13/08/2020 13:25:35 09/02/2018 10:58:47


K




agents








26/01/2008 00:00:00


K




agents








26/01/2008 00:00:00


K




passivation






WORKBENCHONLY

04/04/2013 00:00:00


K




passivation




Stählen


Stählen

Yes QUALIFIED 14/08/2020 14:20:17 08/07/2016 19:18:43


K




passivation









WORKBENCHONLY

26/09/2013 00:00:00


K





base d'époxy)


base d'époxy)





26/01/2008 00:00:00


K






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 13/08/2020 13:25:35 18/02/2010 00:00:00


K





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 13/08/2020 13:25:37 18/02/2010 00:00:00


K





systems







18 Yes QUALIFIED 13/08/2020 13:25:37 18/02/2010 00:00:00


K





systems











11 Yes QUALIFIED 13/08/2020 13:25:36 18/02/2010 00:00:00


K





systems







8 Yes QUALIFIED 13/08/2020 13:25:37 18/02/2010 00:00:00


K











WORKBENCHONLY

31/05/2013 00:00:00


K













26/01/2008 00:00:00


K







TRANSPORTATION



TRANSPORTATION

2-1 Yes QUALIFIED 13/08/2020 13:25:36 18/02/2010 00:00:00


K








13/08/2020 13:25:41 PRIMERAPPLICATION

ONLY

06/03/2018 10:39:55


K


06 Bonding 06-02 Manufacture Bonding of GLAREparts structuralbonding of fiber

metal laminates FML

80-T-34-9000 Bonding ofStructures

80-T-34-9000 Bonding ofStructures

Yes QUALIFIED 13/08/2020 13:25:36 09/02/2015 00:00:00



02 Nov 2020 10:51

20/81




ess scope



K






3 Yes QUALIFIED 13/08/2020 13:25:38 05/03/2018 18:04:31


K




DETECTION



K





12 Yes QUALIFIED 13/08/2020 13:25:39 14/04/2014 00:00:00


K


TBD TBD Pickling of Al forBonding

80-T-35-0108 Pickling of Al forBonding

80-T-35-0108 Pickling of Al forBonding

Yes QUALIFIED 13/08/2020 13:25:34 09/02/2015 00:00:00


K



194393 SATEC 9 CHEMIN DESCLOSEAUX

MANTES LA JOLIE 78200 France SURFACETREATMENTSPECIALISTS




alloys


alloys

2 Yes QUALIFIED 20/03/2019 08:38:21 14/05/2014 00:00:00





aluminium alloys


aluminium alloys






aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 20/03/2019 08:49:16 14/05/2014 00:00:00














24/01/2019 16:08:53 WITHOUT POSTTREATMENT

06/06/2017 09:57:05





agents




09/07/2019 10:16:12 Limited to parts withUTS < 1450 MPa

01/04/2015 00:00:00





passivation





26/10/2016 13:26:40 TYPE 1 BYIMMERSION

14/05/2014 00:00:00





passivation


Steel


Steel


Steel


22/10/2019 15:05:03 AUSTENITIC STEELWITH RM<1100MPA

01/07/2014 00:00:00





passivation




24/03/2010 00:00:00 ACIEN R INF 1450MPA

04/03/2008 00:00:00





passivation


26/10/2016 13:26:40 TYPE L, TYPE M 01/04/2015 00:00:00








29/07/2019 09:41:08 Stress relieving andde-embrittlement

operation onfurnaces L001 &

L004 only

25/03/2019 09:57:09







06/04/2020 08:15:51 UTS steel < 1450MPa

04/03/2008 00:00:00









09/07/2019 10:46:07 METALLIC PARTS 14/05/2014 00:00:00




18/03/2019 09:57:48 Limitation on surfacepreparation (SP3 +

TP1)

01/03/2019 11:32:04







3 Yes QUALIFIED 26/10/2020 08:41:28 14/05/2014 00:00:00





anodising process



surface resistance)




5 Yes QUALIFIED 09/07/2019 11:11:02 09/07/2019 11:05:17








4 Yes QUALIFIED 26/10/2016 13:26:41 01/04/2015 00:00:00







MAGNETOSCOPIE








23/10/2020 17:38:29 Limited to "METHOD1A2a and 1D3a"

01/04/2015 00:00:00

197446 SGI VILLERSCOTTERETS

4 RUE DUMARCHAIS

VILLERSCOTTERETS





Titanium Alloys


Titanium Alloys


28/03/2017 14:49:51 LIMITED TO LINEV5

21/07/2016 17:15:38


4 RUE DUMARCHAIS

VILLERSCOTTERETS





fixations )



4 RUE DUMARCHAIS

VILLERSCOTTERETS





alloys


alloys

2 Yes QUALIFIED 26/10/2016 14:00:11 02/07/2015 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS




aluminium alloys

ADET0072 Oxydation anodiquechromique des


N NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

06/11/2018 10:10:56 BF5-CLASSES 2SET 3

17/02/2005 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS




aluminium alloys


aluminium alloys



4 RUE DUMARCHAIS

VILLERSCOTTERETS







4 RUE DUMARCHAIS

VILLERSCOTTERETS






1 Yes QUALIFIED 26/10/2016 14:00:11 19/03/2014 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS




aluminium alloys





4 RUE DUMARCHAIS

VILLERSCOTTERETS












A3 Yes QUALIFIED 26/10/2016 14:00:11 10/08/2012 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS





expansion



Yes QUALIFIED 22/10/2019 12:07:08 21/07/2016 17:18:45


4 RUE DUMARCHAIS

VILLERSCOTTERETS





expansion

Dry blasting AIPS02-02-002 Dry blasting 2 AIPI02-02-002 Dry blasting 2 Yes AUTHORISATIONTO PROCEED WITH

LIMITATIONS

2020-11-30 02/09/2020 12:05:35 TO TITANIUM ONLY 17/12/2019 00:01:49



02 Nov 2020 10:51

21/81




ess scope



4 RUE DUMARCHAIS

VILLERSCOTTERETS




passivation







AP2190.0 FORDEFINITION) -

ONLY FORAUTOMATIC LINE

G4

31/08/2011 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS




passivation





26/10/2016 14:00:12 BATHAPPLICATION: NO

RESTRICTION ;IMMERSIONPROCESS:

RESTRICTION TO2XXX ALLOYS ANDUNPAINTED PARTS

02/07/2015 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS






26/10/2016 14:00:10 PAINT WORKSHOP1 AND 6, FOR

METALLIC PARTSONLY

10/08/2012 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS






General


General

Yes QUALIFIED 26/10/2016 14:00:09 14/08/2014 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS









Yes QUALIFIED 26/10/2016 14:00:09 18/12/2015 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS









Yes QUALIFIED 26/10/2016 14:00:09 18/12/2015 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS








26/10/2016 14:00:12 ONLY FORMETALLIC PARTS

10/08/2012 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS





Acid -

AIPI09-02-005 Pickling of Titaniumand its alloys

3 Yes QUALIFIED 22/10/2019 12:09:13 07/07/2016 14:49:42


4 RUE DUMARCHAIS

VILLERSCOTTERETS







13/09/2019 09:48:31 NONE: BOTH FORPICKLING ANDPAINTING PRE-

TREATMENT

14/08/2014 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS










3 Yes QUALIFIED 13/09/2019 09:46:55 02/07/2015 00:00:00


4 RUE DUMARCHAIS

VILLERSCOTTERETS






21/10/2019 14:56:43 G4 WORKSHOP:SENSIBILITY 2, 3 &4 ; G3 WORKSHOP

SENSIBILTY 3-MATERIALS: G3

AND G4WORKSHOPSALLOWED ONTITANIUM AND

ALUMINIUMALLOYS

NO NO 05/12/2013 00:00:00

197467 SGS QUALITEST DOMAINE DECORBEVILLE

OUEST

ORSAY 91400 France NDT SPECIALISTS Non DestructiveTesting










Powder Bed Fusion

06/01/2014 00:00:00

200001 SPEM AERO 6 RUE DU CASTELMOULY

BAGNERES DEBIGORRE




aluminium alloys


aluminium alloys



BAGNERES DEBIGORRE




aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 24/02/2020 09:50:17 22/02/2018 10:43:48


BAGNERES DEBIGORRE













24/02/2020 09:50:18 WITHOUT POSTTREATMENT

08/09/2016 16:34:03


BAGNERES DEBIGORRE





expansion



BAGNERES DEBIGORRE




passivation






BAGNERES DEBIGORRE




passivation





22/07/2020 16:40:24 by immersionprocess only

10/11/2017 15:30:36


BAGNERES DEBIGORRE




passivation




austenitiques



BAGNERES DEBIGORRE







BAGNERES DEBIGORRE





Paint


Paint


Paint



27/07/2020 13:46:47


BAGNERES DEBIGORRE





systems


systems


systems


14/11/2019 10:16:30 ONLY FORVARNISH

APPLICATION FORINK AND LABELPROTECTION

08/06/2017 14:37:33


BAGNERES DEBIGORRE







parts


parts



08/09/2016 17:18:08


BAGNERES DEBIGORRE







08/04/2020 09:50:53 PRIOR TO FPI &THICKNESS

REMOVAL < 25µm

04/07/2013 00:00:00


BAGNERES DEBIGORRE




anodising process



surface resistance)



surface resistance)



BAGNERES DEBIGORRE




DETECTION


DETECTION


08/04/2020 14:03:42 Method IA2a. 02/10/2019 11:31:38


BAGNERES DEBIGORRE





12 Yes QUALIFIED 14/11/2019 10:16:32 05/12/2014 00:00:00

200100 SPITZKE ROBERFLAECHEN-

UNDGALVOANOTECHNI

K GMBH CO KG

KIEBITZHOERN 19 BARSBUETTEL 22885 Germany SURFACETREATMENTSPECIALISTS




expansion







01/11/2010 00:00:00


UNDGALVOANOTECHNI

K GMBH CO KG





expansion



UNDGALVOANOTECHNI

K GMBH CO KG




agents


Plating







14/03/2016 13:10:29



02 Nov 2020 10:51

22/81




ess scope



UNDGALVOANOTECHNI

K GMBH CO KG




agents








14/03/2016 13:13:32


UNDGALVOANOTECHNI

K GMBH CO KG




agents








01/11/2010 00:00:00


UNDGALVOANOTECHNI

K GMBH CO KG




passivation









05/05/2009 00:00:00


UNDGALVOANOTECHNI

K GMBH CO KG




passivation




Stählen


Stählen





05/05/2009 00:00:00


UNDGALVOANOTECHNI

K GMBH CO KG




passivation











05/05/2009 00:00:00


UNDGALVOANOTECHNI

K GMBH CO KG










3 Yes QUALIFIED 14/11/2019 10:17:31 12/06/2017 09:46:12


UNDGALVOANOTECHNI

K GMBH CO KG


TBD TBD Rinsing 80-T-35-0090 Rinsing 80-T-35-0090 Rinsing Yes QUALIFIED WITHLIMITATIONS




05/05/2009 00:00:00

200900 STEINMETZMANFRED GMBH

INDUSTRIELACKIERUNGEN

ACHTER DEWEIDEN 16

SCHENEFELD 22869 Germany SURFACETREATMENTSPECIALISTS




base d'époxy)


base d'époxy)





07/11/2008 00:00:00



ACHTER DEWEIDEN 16






General


General





07/11/2008 00:00:00



ACHTER DEWEIDEN 16





systems







07/11/2008 00:00:00



ACHTER DEWEIDEN 16













07/11/2008 00:00:00

203055 TECNATOM SA AV MONTES DEOCA 1

SAN SEBASTIANDE LOS REYES

28709 Spain NDT SPECIALISTSGP-2-215 TEST

JIGS EQUIPMENTGP-2-216

MACHINES,TOOLING

INDUSTRIALMAINTENANCE


Ultrasonic Laser-UltrasonicInspection

AITM6-4023 Laser - UltrasonicInspection

2 AITM6-4023 Laser - UltrasonicInspection


15/06/2020 11:20:19 Laser ultrasonicinspection system -TecnaLUS - locatedin Airbus DefenceSpace, Pol. Ind.Bahía de Cádiz,Carretera Puerto

Santa María-Sanlúcar, Km. 5,5,11500 El Puerto deSta María, Cadiz :

inspection of CFRPparts with a thickness

range up to 15 mm

QCS170161 Laser ultrasonicinspection system -

TecnaLUS

Laser ultrasonicinspection system -TecnaLUS - locatedin Airbus DefenceSpace, Pol. Ind.

Bahía de

21/07/2017 14:53:20

217353 H BOBERFLAECHENTE

CHNIK OHG I.G.

CHARLOTTENBURGER STR. 5

GEESTHACHT 21502 Germany SURFACETREATMENTSPECIALISTS



Powder coating ofmetallic parts

80-T-35-5401 Electrostatic PowderCoating of Aluminium

Components

80-T-35-5401 Electrostatic PowderCoating of Aluminium

Components




AP2190.0 FORDEFINITION); A252-

72245-206;A252-72549-200;

A252-79622-200/1;A252-80528-200;A294-91269-200;A294-91271-200;

A294-91521-200/2;A925-92690-200;B924-90281-00;

D252-77547-000/2;D252-77564-000/2/4

24/06/2003 00:00:00

219391 STEG GROUPESTEN ARB

190 BIS ROUTE DEPONTOISE




agents




14/11/2019 10:21:26 RÉCTIFICATIONPAR STÉS

RECTIMO, ARB OUCAZENAVES

TRAITEMENT DANSCUVE N° 5

27/10/2011 00:00:00

221174 METALUXMETALLVEREDELU

NGS GMBH

SPORTPLATZWEG20

ALTLUSSHEIM 68804 Germany SURFACETREATMENTSPECIALISTS



aluminium alloys







26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20




80-T-35-2200 Hard Anodizingh 80-T-35-2200 Hard Anodizingh Yes QUALIFIED 25/03/2020 14:49:21 26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20






1 Yes QUALIFIED 27/08/2019 13:46:33 22/06/2018 10:37:17


NGS GMBH

SPORTPLATZWEG20




aluminium alloys


Sealing


Sealing

Yes QUALIFIED 04/07/2019 15:52:37 26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20




aluminium alloys







26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20




aluminium alloys


Sealing


Sealing





26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20




aluminium alloys

80-T-35-2003 Dichromate Sealingof DC-Anodized

Layers

80-T-35-2003 Dichromate Sealingof DC-Anodized

Layers





26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20




aluminium alloys


aluminium alloys


aluminium alloys


25/03/2020 14:52:39 Non Painted Parts 22/06/2018 10:47:41


NGS GMBH

SPORTPLATZWEG20




agents




Yes QUALIFIED 03/12/2019 09:15:17 26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20




passivation








26/01/2008 00:00:00



02 Nov 2020 10:51

23/81




ess scope



NGS GMBH

SPORTPLATZWEG20




passivation





06/06/2019 14:34:36 Immersion MethodOnly

22/06/2018 10:54:58


NGS GMBH

SPORTPLATZWEG20




passivation


Steel


Steel


Steel


04/07/2019 15:52:41 Process withoutPickling

02/12/2014 00:00:00


NGS GMBH

SPORTPLATZWEG20




passivation





Yes QUALIFIED 04/07/2019 15:52:42 26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20




passivation





Yes QUALIFIED 04/07/2019 15:52:43 26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20




passivation




Stählen


Stählen





26/01/2008 00:00:00


NGS GMBH

SPORTPLATZWEG20





Acid -


Acid -

Yes QUALIFIED 04/11/2019 10:30:38 08/12/2009 00:00:00


NGS GMBH

SPORTPLATZWEG20










3 Yes QUALIFIED 29/06/2018 09:54:56 22/06/2018 11:13:32


NGS GMBH

SPORTPLATZWEG20


TBD TBD Descaling ofTitanium and

Titanium Alloys inSalt Baths

80-T-35-0113 Descaling ofTitanium and


80-T-35-0113 Descaling ofTitanium and






08/12/2009 00:00:00

223087 BODYCOTE HIT ZI LES GRANGES AMBAZAC 87240 France SURFACETREATMENTSPECIALISTS






de titane


02/11/2016 14:13:29 REVÊTEMENT WC-CO AVEC

PROCÉDÉ HVOFSUR SUPPORT

ACIERINOXYDABLE

CLASSE 2S ET 3

23/01/2013 00:00:00







3 AIPI02-03-001 Application ofthermal spray



06/11/2018 10:13:35 INOX ANDTITANIUM, CLASS

2S & 3 ONLY

23/01/2013 00:00:00




Molybdenumcoatings


Molybdenumcoatings


06/11/2018 14:43:59 T800 12/05/2011 00:00:00



02-03 Deposition Molybdenum coatingof TI6Al4V, Inconel

and very highstrength stainless

steel Rm 1200 MPaby thermal spraying

AIPS02-03-011 Molybdenum coatingof TI6Al4V, Inconel

and very highstrength stainlesssteel (Rm > 1200MPa) by thermal

spraying


240855 ADVANCEDCOATING

TECHNIQUES INC

311 WYANDANCHAVE

NORTH BABYLON 11704 USA SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE





y Paint





1 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE










4 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE





systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE





systems







18 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE





systems











11 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE





systems


RESISTANT PAINT


RESISTANT PAINT

8 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE





systems







8 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE




APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE









16 Yes QUALIFIED 25/03/2010 00:00:00 24/03/2010 00:00:00


TECHNIQUES INC

311 WYANDANCHAVE




DETECTION



TECHNIQUES INC

311 WYANDANCHAVE



ALLOYS


ALLOYS


ALLOYS

7 Yes QUALIFIED 01/04/2019 14:34:43 17/01/2019 02:09:40

240871 ALL METALSPROCESSING

8401STANDUSTRIAL

AVE.

STANTON 90680-2688 USA SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes AUTHORISATIONTO PROCEED

2020-11-06 02/10/2020 01:25:19 18/02/2010 00:00:00


8401STANDUSTRIAL

AVE.




passivation


Steel


Steel


Steel

2 Yes QUALIFIED 26/10/2016 14:24:14 10/10/2012 00:00:00


8401STANDUSTRIAL

AVE.






OR EXTERNALSURFACE



OR EXTERNALSURFACE


2020-11-06 02/10/2020 01:24:05 18/02/2010 00:00:00



02 Nov 2020 10:51

24/81




ess scope



8401STANDUSTRIAL

AVE.










4 Yes QUALIFIED 17/06/2020 15:45:46 18/02/2010 00:00:00


8401STANDUSTRIAL

AVE.









16 Yes QUALIFIED 01/09/2020 11:27:16 18/02/2010 00:00:00


8401STANDUSTRIAL

AVE.




ETCH INSPECTION


inspection


inspection


2020-11-04 14/10/2020 18:43:53 TW0228 TW0228 10/10/2012 00:00:00


8401STANDUSTRIAL

AVE.







4 Yes QUALIFIED 26/10/2016 14:24:14 TW1700 TW1700 11/06/2013 00:00:00


8401STANDUSTRIAL

AVE.







8401STANDUSTRIAL

AVE.



alloys




240873 ALLOY HEATTREATMENT

GRAZEBROOKINDUSTRIAL PARK

DUDLEY DY2 0XW United Kingdom HEAT TREATMENTSPECIALISTS



ABP3-1119 HEAT TREATMENTOF ALUMINIUM

9 ABP3-1119 HEAT TREATMENTOF ALUMINIUM


03/03/2020 16:47:11 See FURNACEPYROMETRY

CONTROL MATRIXat latest issue

18/02/2010 00:00:00






ABP3-1120 REFRIGERATEDSTORAGE OF

ALUMINIUM AFTERHEAT TREATMENT

1-3 ABP3-1120 REFRIGERATEDSTORAGE OF


1-3 Yes QUALIFIED WITHLIMITATIONS

03/03/2020 16:43:30 See FURNACEPYROMETRY

CONTROL MATRIXat latest issue

18/02/2010 00:00:00






materials







TBD TBD THE USE OFPOLYALKYLENE

GLYCOLQUENCHANTDURING HEATTREATMENT

ABP3-1110 THE USE OFPOLYALKYLENE


4 ABP3-1110 THE USE OFPOLYALKYLENE


4 Yes QUALIFIED 13/05/2019 13:50:53 28/08/2018 15:01:08

240881 ASTRO ALUMINIUMTREATING

COMPANY INC

11040 PALMERAVENUE

SOUTH GATE 90280 USA HEAT TREATMENTSPECIALISTS



general


General

2 NO_AIRBUS_PI Yes QUALIFIED 08/08/2019 11:37:34


COMPANY INC

11040 PALMERAVENUE






9 Yes QUALIFIED 13/05/2019 13:51:47 14/12/2009 00:00:00


COMPANY INC

11040 PALMERAVENUE








1-3 Yes QUALIFIED 13/05/2019 13:51:47 14/12/2009 00:00:00


COMPANY INC

11040 PALMERAVENUE





Parts


Parts

A3 Yes QUALIFIED 13/05/2019 13:51:47 27/05/2016 10:39:30


COMPANY INC

11040 PALMERAVENUE




materials




240886 BODYCOTE HEATTREATMENTS

LIMITED

MACCLESFIELDROAD

STOCKPORT SK7 5EN United Kingdom HEAT TREATMENTSPECIALISTS




expansion

Thermochemicaltreatment of steels by

nitriding

ABP3-1114 NITRIDING OFSTEELS

2 ABP3-1114 NITRIDING OFSTEELS

2 Yes QUALIFIED 10/03/2020 11:41:02 14/12/2009 00:00:00


LIMITED

MACCLESFIELDROAD





expansion


nitriding

AIPS02-02-013 Thermochemicaltreatment of steels by

nitriding

2 NA Yes QUALIFIED 10/03/2020 11:38:15 25/07/2019 11:57:08


LIMITED

MACCLESFIELDROAD




general


General

2 NA Yes QUALIFIED 10/03/2020 11:36:53 13/08/2012 00:00:00


LIMITED

MACCLESFIELDROAD




alloys

80-T-36-1015 Heat Treatment ofTitanium


Yes QUALIFIED 10/03/2020 11:32:21 15/12/2014 00:00:00


LIMITED

MACCLESFIELDROAD




alloys



8 Yes QUALIFIED 10/03/2020 11:28:49 14/12/2009 00:00:00


LIMITED

MACCLESFIELDROAD




alloys


alloys


alloys

A3 Yes QUALIFIED 09/03/2020 17:00:20 25/07/2019 12:04:54


LIMITED

MACCLESFIELDROAD






Yes QUALIFIED 10/03/2020 11:30:05 12/03/2015 00:00:00


LIMITED

MACCLESFIELDROAD






5 Yes QUALIFIED 10/03/2020 11:33:47 14/12/2009 00:00:00


LIMITED

MACCLESFIELDROAD






A2 Yes QUALIFIED 10/03/2020 11:34:44 13/08/2012 00:00:00

240888 BODYCOTE IMT NV INDUSTRIEPARK-NOORD 7

SINT-NIKLAAS 9100 Belgium HEAT TREATMENTSPECIALISTS

04 Heat Treatment 04-04 AdditiveManufacturing,

Casting

Hot IsostaticPressing of Metallic

Materials (HIP)

AIPS04-00-005 Hot IsostaticPressing of Metallic

Materials (HIP)

2 AIPI04-00-005 Hot IsostaticPressing of Metallic

Materials (HIP)


14/10/2020 17:50:00 Limited to HIP unitSN05 using FurnaceNumber 3 with Dwell

SelectedTemperature

T=920°C±10°C andDwell Selected

Pressure P=1000bar-0/+50.

All testing, apart fromtomography (CTscan), are to beperformed at BKWerkstofftechnik

Gmbh (BKW, ARP-ID143041).

Limited to Titaniumalloys part

manufacturedaccording to

AIPI/AIPS 01-04-020.

170124 Hot IsostaticPressing of Metallic

Materials (HIP)

Supplier qualificationaccording to the

AIPS04-00-005 "HotIsostatic Pressing of

Metallic Materials

11/06/2019 17:09:57

240890 BODYCOTETHERMAL

PROCESSING

7474 GARDENGROVE

BOULEVARD

WESTMINSTER 92683 USA HEAT TREATMENTSPECIALISTS



general


General



PROCESSING

7474 GARDENGROVE

BOULEVARD






Yes QUALIFIED 13/05/2019 13:55:17 04/04/2013 00:00:00


PROCESSING

7474 GARDENGROVE

BOULEVARD






9 Yes QUALIFIED 13/05/2019 13:55:17 18/02/2010 00:00:00


PROCESSING

7474 GARDENGROVE

BOULEVARD





Parts


Parts


13/05/2019 13:55:17 Furnace 29 (AIR)and 32 (Salt bath) on

Aluminum alloys :2024 and 7050

05/02/2016 18:01:40


PROCESSING

7474 GARDENGROVE

BOULEVARD




materials








13/05/2019 13:55:18 For Aluminium parts 16/03/2017 16:35:34

240894 BRISTOL METALSPRAYING AND

PROTECTIVECOATINGS LIMITED

PAYNES SHIPYARD BRISTOL BS3 1RP United Kingdom SURFACETREATMENTSPECIALISTS




expansion





4 Yes QUALIFIED 14/11/2019 10:22:40 14/12/2009 00:00:00



02 Nov 2020 10:51

25/81




ess scope


240894 BRISTOL METALSPRAYING AND

PROTECTIVECOATINGS LIMITED

PAYNES SHIPYARD BRISTOL BS3 1RP United Kingdom SURFACETREATMENTSPECIALISTS




ABP1-3038 DEPOSITION OFZINC BY SPRAYING

4-1 ABP1-3038 DEPOSITION OFZINC BY SPRAYING

4-1 Yes QUALIFIED 14/11/2019 10:22:39 14/12/2009 00:00:00

240902 COAST PLATINGINCORPORATED

128 WEST 154THSTREET

GARDENA 90248-2282 USA SURFACETREATMENTSPECIALISTS



aluminium alloys



Yes QUALIFIED 26/10/2016 14:27:40 29/07/2013 00:00:00






aluminium alloys


ALUMINIUM


ALUMINIUM


18/10/2019 14:16:06 METHOD 1 - CYCLEA

14/12/2009 00:00:00






aluminium alloys


aluminium alloys







passivation




2 Yes QUALIFIED 26/10/2016 14:27:43 19/01/2011 00:00:00






passivation


Steel


Steel


Steel


24/10/2019 17:40:15 NO CHEMICALPICKLING BEFORE

PASSIVATION

04/08/2011 00:00:00






passivation




Stählen


Stählen

Yes QUALIFIED 15/12/2016 15:26:13 21/01/2015 00:00:00






passivation







Yes QUALIFIED 15/12/2016 15:27:58 29/07/2013 00:00:00







base d'époxy)


base d'époxy)


26/10/2016 14:27:41 FACC WP FLAPTRACK FAIRINGS

ALL

29/07/2013 00:00:00








OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00















General


General



ALL

18/03/2015 00:00:00







systems


systems


systems

A2 Yes QUALIFIED 26/10/2016 14:27:43 19/01/2011 00:00:00













ALL

29/07/2013 00:00:00











16 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00










Yes QUALIFIED 26/10/2016 14:27:41 18/03/2015 00:00:00








AIPS05-03-005 Chemical stripping ofaircraft external paint


2 AIPI05-03-005 Chemical stripping ofaircraft external paint



03/04/2018 15:27:53 Surface < 5m² 31/05/2017 17:34:16





03/10/2019 15:53:46 Limited Approval forMasking of EB areas

of Metallic Parts,ONLY - in

accordance with theAIPS 07-01-006/AIPI

07-01-006, TheProcessor to be

performing /providingthe masking and

processing for theserequirements that

currently require thelimited approval are

as follows:AIPS 07-01-006

applicable sectionsrequired to performMasking on Metallic

Parts4.1.2.1 Preparation

of the contact surfacefor electrical bonding4.1.2.1.1 Dimensions

of area masked orstripped

4.1.2.1.1.1 Circularcontact surface4.1.2.1.1.2 Notcircular contact

surface4.1.2.1.2 Preparationof contact surfaces4.1.2.1.2.1 Maskingthe contact surface

prior to application ofinsulating surface

treatments.AIPI 07-01-006


Parts1.2.2 Indication ondrawings Drawing

identification2.3.2 Handling of part2.3.3 Incoming parts

condition2.3.4 Personnel

instructions3.1 PREPARATION

OF THE WORK3.1.1.1General

information3.1.1.4 Surface

Preparation Process:Surface preparation -SP7, Metallic parts

with protected zone –Masking. Information

15/11/2016 21:10:13









2020-12-31 19/05/2020 12:58:37 19/01/2011 00:00:00






materials







5 Yes QUALIFIED 22/10/2019 19:51:21 AUDIT 12LIFA_D99 AUDIT 12LIFA_D99 29/07/2013 00:00:00






materials

IGC04-25-120 REGLES A SUIVREPOUR LA MESURE

DE LACONDUCTIVITEELECTRIQUE (COURANTS DE

FOUCAULT )

E NA Yes QUALIFIED 22/10/2019 19:40:22 PC 209.0118/2003 PC 209.0118/2003 09/07/2012 00:00:00






DETECTION








12 Yes QUALIFIED 26/10/2016 14:27:44 A350 A350 19/01/2011 00:00:00







02 Nov 2020 10:51

26/81




ess scope


240917 TRIUMPHPROCESSING INC

2605 INDUSTRYWAY

LYNWOOD 90262 USA SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM


17/05/2019 16:44:09 Method 4 Cycle Awith authorized

deviation (PSD 0446)for the temperature.

18/11/2010 00:00:00


2605 INDUSTRYWAY




passivation





28/10/2016 01:53:50 local application 03/08/2016 22:32:36


2605 INDUSTRYWAY




passivation





28/10/2016 01:46:48 local application 21/10/2016 16:52:06


2605 INDUSTRYWAY






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/12/2018 15:56:56 18/11/2010 00:00:00


2605 INDUSTRYWAY





J IPDA62-02 OXYDATIONANODIQUE

CHROMIQUE DESALL ALU

A5 Yes QUALIFIED 16/03/2016 09:59:12 06/01/2016 00:00:00


2605 INDUSTRYWAY





systems


systems


systems


Ink protection withvarnish

28/10/2016 01:59:43


2605 INDUSTRYWAY









16 Yes QUALIFIED 18/11/2010 00:00:00 18/11/2010 00:00:00


2605 INDUSTRYWAY








12/01/2017 20:22:39 Metallic parts 13/05/2016 15:21:26


2605 INDUSTRYWAY







parts


parts


12/01/2017 20:52:32 Metallic parts 28/10/2016 01:31:28


2605 INDUSTRYWAY



29/01/2020 13:50:24 masking authorizedonly following

AIPS07-01-006§§4.1.2, §4.1.2.1.1,

§4.1.2.1.1.1,§4.1.2.1.1.2 and

§4.1.2.1.2.1

15/11/2019 01:01:08


2605 INDUSTRYWAY







14/11/2019 20:30:24 UnderQCS171205_i1

approval

QCS171205 TPI Procedure 01.11Rev C vs AIPS09-02-

006

Material: AMS4911& AMS4901

unless othermaterials have

demonstrated passoff AIPS09-02-005

requirem

25/08/2014 00:00:00


2605 INDUSTRYWAY










3 Yes QUALIFIED 17/05/2019 17:02:47 13/05/2016 15:23:27


2605 INDUSTRYWAY




materials







5 Yes QUALIFIED 17/05/2019 16:53:19 06/01/2016 00:00:00


2605 INDUSTRYWAY




materials



FOUCAULT )

E NA Yes QUALIFIED 17/05/2019 17:04:44 N/A N/A 30/01/2013 00:00:00


2605 INDUSTRYWAY




DETECTION



2605 INDUSTRYWAY






240919 ELECTROLURGY 1121 DURYEAAVENUE

IRVINE 92614-5519 USA SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 27/02/2019 16:45:31 14/12/2009 00:00:00







2-1 Yes QUALIFIED 27/02/2019 16:45:31 14/12/2009 00:00:00





aluminium alloys


aluminium alloys


aluminium alloys


27/02/2019 16:45:31 Not painted partsonly

29/09/2016 20:39:08











3 Yes QUALIFIED 20/12/2019 14:27:29 02/11/2016 00:20:51

240938 BOWMILL METALTREATMENTS

LIMITED

85 STERTEAVENUE WEST

POOLE BH15 2AL United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 14/11/2019 10:24:16 14/12/2009 00:00:00


LIMITED






expansion





4 Yes QUALIFIED 14/11/2019 10:24:17 14/12/2009 00:00:00


LIMITED






expansion


of metal parts





9 Yes QUALIFIED 14/11/2019 10:24:17 14/12/2009 00:00:00


LIMITED





agents






3 Yes QUALIFIED 14/11/2019 10:24:18 14/12/2009 00:00:00


LIMITED





agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 14/11/2019 10:24:18 14/12/2009 00:00:00


LIMITED





agents




2 Yes QUALIFIED 14/11/2019 10:24:17 14/12/2009 00:00:00


LIMITED





passivation




6 Yes QUALIFIED 14/11/2019 10:24:17 14/12/2009 00:00:00


LIMITED







OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 14/11/2019 10:24:17 14/12/2009 00:00:00


LIMITED






y Paint





1 Yes QUALIFIED 14/11/2019 10:24:17 14/12/2009 00:00:00


LIMITED










5 Yes QUALIFIED 14/11/2019 10:24:16 14/12/2009 00:00:00



02 Nov 2020 10:51

27/81




ess scope



LIMITED











4 Yes QUALIFIED 14/11/2019 10:24:15 14/12/2009 00:00:00


LIMITED






systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 14/11/2019 10:24:16 14/12/2009 00:00:00


LIMITED






systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 14/11/2019 10:24:16 14/12/2009 00:00:00


LIMITED






systems







18 Yes QUALIFIED 14/11/2019 10:24:16 14/12/2009 00:00:00


LIMITED






systems











11 Yes QUALIFIED 14/11/2019 10:24:15 14/12/2009 00:00:00


LIMITED






systems


RESISTANT PAINT


RESISTANT PAINT

8 Yes QUALIFIED 14/11/2019 10:24:17 14/12/2009 00:00:00


LIMITED





APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 14/11/2019 10:24:14 14/12/2009 00:00:00


LIMITED










16 Yes QUALIFIED 14/11/2019 10:24:15 14/12/2009 00:00:00


LIMITED





ABP4-3329 APPPLICATION OFAERODYNAMIC

FILLER SEALANT

4 ABP4-3329 APPPLICATION OFAERODYNAMIC

FILLER SEALANT

4 Yes QUALIFIED 14/11/2019 10:24:16 14/12/2009 00:00:00


LIMITED





ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION


14/11/2019 10:24:14 None UK UK 14/12/2009 00:00:00


LIMITED







Detection


240944 HYDE COATINGSLIMITED

BRIDGE STREET STALYBRIDGE SK15 1PH United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 14/11/2019 10:25:32 18/11/2010 00:00:00





aluminium alloys


aluminium alloys















14/11/2019 10:25:32 Small TSA line 08/07/2015 00:00:00






expansion





4 Yes QUALIFIED 27/05/2020 13:31:32 18/11/2010 00:00:00






expansion









4-1 Yes QUALIFIED 14/11/2019 10:25:31 18/11/2010 00:00:00





passivation




6 Yes QUALIFIED 14/11/2019 10:25:32 18/11/2010 00:00:00





passivation





14/11/2019 10:25:31 LOCALAPPLICATION

ONLY

19/06/2013 00:00:00







OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 14/11/2019 10:25:30 18/11/2010 00:00:00







PAINTS



PAINTS


14/11/2019 10:25:30 limited to methods 4,5 and 6.

03/12/2018 17:42:04







METALL

A5 Yes QUALIFIED 14/11/2019 10:25:30 05/12/2017 17:23:08






systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 14/11/2019 10:25:32 18/11/2010 00:00:00






systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 14/11/2019 10:25:30 18/11/2010 00:00:00






systems







18 Yes QUALIFIED 14/11/2019 10:25:31 18/11/2010 00:00:00






systems











11 Yes QUALIFIED 14/11/2019 10:25:33 18/11/2010 00:00:00






systems








14/11/2019 10:25:33 limited to metallicparts.

03/12/2018 17:27:34






systems


systems


systems


14/11/2019 10:25:31 METALLIC PARTONLY

19/06/2013 00:00:00



02 Nov 2020 10:51

28/81




ess scope











16 Yes QUALIFIED 14/11/2019 10:25:33 18/11/2010 00:00:00









14/11/2019 10:25:33 METALLIC PARTONLY

19/06/2013 00:00:00








parts


parts


14/11/2019 10:25:34 METALLIC PART,2024 ALUMINIUM

ALLOY ONLY

19/06/2013 00:00:00






ABP4-4139 STRIPPING OFPAINTS BYBLASTING (

PAINTBLAST )

4 ABP4-4139 STRIPPING OFPAINTS BYBLASTING (

PAINTBLAST )

4 Yes QUALIFIED 14/11/2019 10:25:32 18/11/2010 00:00:00





anodising process



surface resistance)



surface resistance)






materials








materials








2020-12-31 09/07/2020 18:24:17 21/12/2015 00:00:00





DETECTION







12 Yes QUALIFIED 14/11/2019 10:25:34 30/01/2013 00:00:00


PROCESSING

3370 BENEDICTWAY

HUNTINGTONPARK

90255 USA HEAT TREATMENTSPECIALISTS




expansion


nitriding



2 Yes QUALIFIED 13/05/2019 13:56:18 16/02/2016 09:57:46


PROCESSING

3370 BENEDICTWAY

HUNTINGTONPARK




general


General

2 NA Yes QUALIFIED 31/07/2019 13:33:53 31/07/2019 13:32:20


PROCESSING

3370 BENEDICTWAY

HUNTINGTONPARK






5 Yes QUALIFIED 13/05/2019 13:56:18 16/02/2016 10:04:37


PROCESSING

3370 BENEDICTWAY

HUNTINGTONPARK




ABP3-1366 CARBURISING ANDCARBO-NITRIDING

AND HEATTREATMENT OFCARBURISING

STEELS.

1 ABP3-1366 CARBURISING ANDCARBO-NITRIDING


STEELS.

1 Yes QUALIFIED 13/05/2019 13:56:18 16/02/2016 10:07:05


PROCESSING

3370 BENEDICTWAY

HUNTINGTONPARK






A2 Yes QUALIFIED 13/05/2019 13:56:18 15/03/2016 15:45:35


PROCESSING

3370 BENEDICTWAY

HUNTINGTONPARK








3-1 Yes QUALIFIED 13/05/2019 13:56:18 16/02/2016 10:01:46

240964 APPLUS UKLIMITED

INSPECTIONHOUSE

REIGATE RH2 9RS United Kingdom NDT SPECIALISTS Non DestructiveTesting


detection




3 NA Yes QUALIFIED 08/10/2020 13:14:03 08/03/2012 00:00:00


INSPECTIONHOUSE







1 Yes QUALIFIED 08/10/2020 14:51:46 08/03/2012 00:00:00


INSPECTIONHOUSE





Detection

3-2 NA Yes QUALIFIED 08/10/2020 15:17:48 14/12/2009 00:00:00


INSPECTIONHOUSE



DETECTION

13 NA Yes QUALIFIED 08/10/2020 15:23:44 14/12/2009 00:00:00


INSPECTIONHOUSE











Powder Bed Fusion

NONE NONE 09/08/2013 00:00:00


COMPANY

ASCOT DRIVE DERBY DE24 8ST United Kingdom SURFACETREATMENTSPECIALISTS




expansion


of metal parts





9 Yes QUALIFIED 07/05/2019 10:49:21 18/02/2010 00:00:00


COMPANY





expansion


of metal parts


REQUIREMENTS


REQUIREMENTS

4 Yes QUALIFIED 24/08/2020 09:31:34


COMPANY





expansion


of metal parts


of metal parts


of metal parts

A3 Yes QUALIFIED 07/05/2019 10:44:52 07/05/2019 10:29:55

240991 POETONGLOUCESTER

LIMITED

EASTERN AVENUE GLOUCESTER GL4 3DN United Kingdom SURFACETREATMENTSPECIALISTS




expansion





4 Yes QUALIFIED 07/12/2018 17:18:35 18/02/2010 00:00:00


LIMITED




agents




2 Yes QUALIFIED 30/11/2018 12:01:56 18/02/2010 00:00:00


LIMITED




materials







5 Yes QUALIFIED 02/08/2019 13:50:37 03/12/2018 12:35:12


LIMITED




ETCH INSPECTION


ETCH INSPECTION

5-1 NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

11/07/2019 17:36:53 Low Alloy steel 30/11/2018 12:37:30


LIMITED




ETCH INSPECTION


inspection


inspection


02/08/2019 13:51:32 Low Alloy Steel 18/03/2019 16:34:39


LIMITED






Detection

3-2 NO_AIRBUS_PI Yes QUALIFIED 15/05/2019 10:45:57 03/12/2018 12:26:38


LIMITED







4 Yes QUALIFIED 18/04/2019 17:47:08 03/12/2018 11:40:07


LIMITED




DETECTION




02 Nov 2020 10:51

29/81




ess scope



LIMITED






02/08/2019 13:53:15 Aluminium Pre-penetrant Etching

internally only

immersion penetrantType 1.A.2 and type

1.D.3.a/d

18/03/2019 16:11:33


LIMITED

DRAKES WAY SWINDON SN3 3HX United Kingdom SURFACETREATMENTSPECIALISTS




ABP1-3037 DEPOSITIONCOATING USING

THE DETONATIONGUN OR HIGH

VELOCITY OXY-FUEL PROCESSES

2 ABP1-3037 DEPOSITIONCOATING USING

THE DETONATIONGUN OR HIGH

VELOCITY OXY-FUEL PROCESSES

2 Yes QUALIFIED 30/01/2019 11:39:01 20/06/2012 00:00:00


LIMITED








12/11/2019 16:05:08 QCS161229.Including

DEGREASING,BLASTING,

COATING andGRINDING. Qualified

Coatings: HVOFSprayed WC-10Co-4Cr (LW-103F) / D-GUN Sprayed WC-14-Co (LW-1N40).Qualified Booths:

HVOF Booth 4 / D-GUN Booths 10, 11.Process limited to:

Titanium Alloys, LowAlloys Steels,

Corrosion ResistingSteels and Nickel

Alloys. NOSTRIPPING

161229 Application ofthermal spray

coatings WC-Co andWC

The process islimited to the

following metallicsubstrates:;

- Titanium alloys,;- Low alloys steel

01/02/2018 17:36:39


LIMITED




Molybdenumcoatings


Molybdenumcoatings


12/11/2019 17:23:45 QCS161230.Including

DEGREASING,BLASTING,

COATING andGRINDING. Qualified

Coatings: TopcoatCo28Mo17Cr3S

(LPT-800) / BondcoatNi20Cr (LN-4).

Qualified Booths: 26,29. Process limited

to: Low Alloys Steels,Corrosion ResistingSteels and Nickel

Alloys. NOSTRIPPING

161230 Application ofthermally sprayed

Cobalt Chromium M

The application ofthermally sprayedCobalt Chromium

Molybdenumcoatings at PraxairSurface Technolo

12/11/2019 17:19:30


LIMITED






13/09/2018 13:29:23 Penetrant testingIAW AITM6-1001limited to "parts

coated IAW AIPS02-03-001 after grinding(no etching) and withS3 Hydrophilic post-

emulsifiableFluorescent

Penetrant with Non-aqueous, wet

Developer

12/06/2018 15:56:04

241007 SOUTH WESTMETAL FINISHING

LTD PAINTDIVISION

EXETER AIRPORTBUSINESS PARK

EXETER EX5 2LJ United Kingdom SURFACETREATMENTSPECIALISTS





OR EXTERNALSURFACE



OR EXTERNALSURFACE


27/04/2018 12:54:20 Paint cabin usedOven 13/4

22/12/2017 15:28:15


LTD PAINTDIVISION







PAINTS



PAINTS

12 Yes QUALIFIED 27/04/2018 12:54:20 04/01/2018 11:22:28


LTD PAINTDIVISION












22/12/2017 15:37:45


LTD PAINTDIVISION










22/12/2017 15:16:57

241008 ROBERT STUARTLTD

1011 EDINBURGHWAY

HARLOW CM20 2DH United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 10/01/2020 13:56:23 14/12/2009 00:00:00


1011 EDINBURGHWAY




agents






3 Yes QUALIFIED 10/01/2020 13:56:23 14/12/2009 00:00:00


1011 EDINBURGHWAY




agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 10/01/2020 13:56:24 14/12/2009 00:00:00


1011 EDINBURGHWAY




agents




2 Yes QUALIFIED 10/01/2020 13:56:24 14/12/2009 00:00:00


1011 EDINBURGHWAY




passivation




6 Yes QUALIFIED 10/01/2020 13:56:24 14/12/2009 00:00:00


1011 EDINBURGHWAY




passivation



3 Yes QUALIFIED 10/01/2020 13:56:24 14/12/2009 00:00:00


1011 EDINBURGHWAY








3-1 Yes QUALIFIED 10/01/2020 13:56:25 14/12/2009 00:00:00


1011 EDINBURGHWAY






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 10/01/2020 13:56:25 14/12/2009 00:00:00


1011 EDINBURGHWAY





systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 10/01/2020 13:56:27 14/12/2009 00:00:00


1011 EDINBURGHWAY





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 10/01/2020 13:56:26 14/12/2009 00:00:00


1011 EDINBURGHWAY





systems







18 Yes QUALIFIED 10/01/2020 13:56:26 14/12/2009 00:00:00


1011 EDINBURGHWAY





systems











11 Yes QUALIFIED 10/01/2020 13:56:26 14/12/2009 00:00:00


1011 EDINBURGHWAY





systems







8 Yes QUALIFIED 10/01/2020 13:56:26 14/12/2009 00:00:00



02 Nov 2020 10:51

30/81




ess scope



1011 EDINBURGHWAY




APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 10/01/2020 13:56:27 14/12/2009 00:00:00


1011 EDINBURGHWAY







TRANSPORTATION



TRANSPORTATION

2-1 Yes QUALIFIED 10/01/2020 13:56:25 14/12/2009 00:00:00


1011 EDINBURGHWAY









16 Yes QUALIFIED 10/01/2020 13:56:25 14/12/2009 00:00:00


1011 EDINBURGHWAY




ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION



1011 EDINBURGHWAY






Detection



1011 EDINBURGHWAY




DETECTION


241014 SILVERFIELDLIMITED

ALDON ROAD POULTON LEFYLDE

FY6 8JL United Kingdom SURFACETREATMENTSPECIALISTS




TITANIUM


TITANIUM

2 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







alloys


alloys


20/12/2018 14:59:47 limitation tounpainted parts

Sealing process isperformed

15/11/2017 10:55:14






aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00














A3 Yes QUALIFIED 06/09/2019 15:01:10 18/12/2017 10:17:47







expansion





4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







expansion


19/02/2016 08:58:17 METALLIC PARTS 21/12/2015 00:00:00






agents






3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






agents




2 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






passivation


Steel


Steel


Steel

2 Yes QUALIFIED 26/10/2016 15:33:59 28/08/2012 00:00:00






passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






passivation



3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00









07/08/2019 14:00:58 STRESSRELIEVING AND

DE-EMBRITTLEMENTOPERATION ONFURNACES N°4

(OV4-1), N°1 (OV1-1), N°3 (OV3-1) AND

N°5 (OV5-1)

27/03/2018 10:16:51










3-1 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00








OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems







18 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems











11 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00











16 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00










20/12/2018 15:31:19 METALLIC PARTS 28/07/2016 09:54:37



02 Nov 2020 10:51

31/81




ess scope









PAINTBLAST )


PAINTBLAST )

4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00





09-02 Pickling Pickling of StainlessSteel and Nickel-Chromium alloys

ABP8-2298 PICKLING OFSTAINLESS


2 ABP8-2298 PICKLING OFSTAINLESS


2 Yes QUALIFIED 18/04/2019 13:50:21 18/02/2010 00:00:00








4 Yes QUALIFIED 18/04/2019 13:51:13 18/02/2010 00:00:00








3 Yes QUALIFIED 20/12/2018 15:29:02 23/10/2015 00:00:00






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 13/09/2018 13:27:20 18/12/2017 09:56:21






materials









ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION


09/09/2014 00:00:00 None UK UK 18/02/2010 00:00:00






ETCH INSPECTION


inspection


inspection









Detection
















DETECTION








12 Yes QUALIFIED 26/10/2016 15:36:13 NDT-B-236-11-AW NDT-B-236-11-AW 22/08/2012 00:00:00





ALLOYS


ALLOYS


ALLOYS

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00




TBD TBD PICKLING OFCOPPER ALLOYS

ABP8-2300 PICKLING OFCOPPER ALLOYS

2 ABP8-2300 PICKLING OFCOPPER ALLOYS

2 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


LIMITED

ALPHINBROOKROAD

EXETER EX2 8TJ United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM


20/01/2020 11:22:16 PROCESS LIMITEDTO METHOD1, 2

AND 7

14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD






2-1 Yes QUALIFIED 20/01/2020 11:27:04 14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD




aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 20/01/2020 11:28:07 14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD












A3 Yes QUALIFIED 20/01/2020 11:29:14 25/02/2016 11:59:54


LIMITED

ALPHINBROOKROAD





expansion






21/09/2018 09:15:20 Stainless steel andaluminium only

20/09/2018 15:17:34


LIMITED

ALPHINBROOKROAD




agents







2020-12-31 16/06/2020 11:46:16 14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD




agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 26/10/2016 15:38:27 14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD




agents





15/10/2020 14:31:35 NON PAINTEDPARTS

08/02/2016 14:50:05


LIMITED

ALPHINBROOKROAD




agents





2020-12-31 16/06/2020 11:48:35 14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD




passivation




6 Yes QUALIFIED 26/10/2016 15:38:27 14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD




passivation




2 Yes QUALIFIED 26/10/2016 15:38:28 25/02/2016 12:04:37


LIMITED

ALPHINBROOKROAD




passivation


Steel


Steel


Steel


20/01/2020 11:39:53 PARTS WITHOUTPICKLING STEP

22/12/2017 15:11:06


LIMITED

ALPHINBROOKROAD




passivation



3 Yes QUALIFIED 26/10/2016 15:38:27 14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD




ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION

5-1 Yes QUALIFIED 20/01/2020 11:38:38 01/06/2018 10:06:22


LIMITED

ALPHINBROOKROAD




ETCH INSPECTION


inspection


inspection

2 Yes QUALIFIED 20/01/2020 11:37:18 01/06/2018 10:17:23


LIMITED

ALPHINBROOKROAD






Detection



LIMITED

ALPHINBROOKROAD







4 Yes QUALIFIED 02/07/2020 15:07:21 02/07/2020 15:06:27


LIMITED

ALPHINBROOKROAD




DETECTION


16/12/2019 11:42:18 LIMITED TO S2WATER WASHABLE

AND S3 POSTEMULSIFIABLE

UK UK 14/12/2009 00:00:00


LIMITED

ALPHINBROOKROAD






16/12/2019 11:39:53 S2 water washableand S3 post-

emulsifiable methodonly

AIPS00-00-006 AIPS00-00-006 22/06/2016 10:29:40


LIMITED

ALPHINBROOKROAD









LIMITATIONS

2021-03-15 19/10/2020 16:43:30 Limitation to stainlesssteels parts with

method 6

19/10/2020 16:43:00



02 Nov 2020 10:51

32/81




ess scope



LIMITED

ALPHINBROOKROAD



ALLOYS


ALLOYS


ALLOYS


LIMITATIONS

2020-12-31 16/06/2020 11:47:14 Passivated parts andwith Method 8 only.Only Alkaline bath(without cyanide) is

qualified (APID_0221to APID_0224 are

approved byESCMB4 and

POMDT)

14/12/2009 00:00:00

241020 STAINLESSPLATING LIMITED

24 DON ROAD SHEFFIELD S9 2UB United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 14/11/2019 10:39:14 24/03/2010 00:00:00





aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 14/11/2019 10:39:13 18/02/2010 00:00:00






expansion





4 Yes QUALIFIED 14/11/2019 10:39:14 11/02/2016 16:02:50





agents






3 Yes QUALIFIED 14/11/2019 10:39:14 18/02/2010 00:00:00





agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 14/11/2019 10:39:14 18/02/2010 00:00:00





agents




2 Yes QUALIFIED 14/11/2019 10:39:14 18/02/2010 00:00:00





agents





14/11/2019 10:39:14 LEGACY PARTSONLY

18/02/2010 00:00:00





passivation




6 Yes QUALIFIED 14/11/2019 10:39:14 18/02/2010 00:00:00





passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 14/11/2019 10:39:15 24/03/2010 00:00:00









3-1 Yes QUALIFIED 30/01/2020 10:06:32 24/03/2010 00:00:00









LIMITATIONS

2020-12-18 22/09/2020 16:19:14 limitation to metallicparts

07/08/2020 11:32:31









2 Yes QUALIFIED 14/11/2019 10:39:16 11/02/2016 15:52:44







4 Yes QUALIFIED 14/11/2019 10:39:16 11/02/2016 15:55:56





ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION


14/11/2019 10:39:15 None UK UK 18/02/2010 00:00:00







Detection

3-2 ABP6-5229 Testing By MagneticParticle Flaw

Detection

3-2 Yes QUALIFIED 14/11/2019 10:39:16 24/07/2015 00:00:00





DETECTION


DETECTION











ALLOYS


ALLOYS


ALLOYS

7 Yes QUALIFIED 14/11/2019 10:39:13 11/02/2016 15:59:04






2 Yes QUALIFIED 14/11/2019 10:39:13 11/02/2016 15:57:39










14/11/2019 10:39:13 Method 4, 5 and 6 11/02/2016 15:35:25




ALLOYS


ALLOYS


ALLOYS

2 Yes QUALIFIED 14/11/2019 10:39:13 18/02/2010 00:00:00

241031 TOWERFIELDPLATING LIMITED

TOWERFIELDINDUSTRIAL

ESTATE

SHOEBURYNESS SS3 9QP United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00



ESTATE




aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00



ESTATE













13/04/2018 13:48:41 WITHOUT POST-TREATMENT

22/05/2017 11:25:06



ESTATE




agents






3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00



ESTATE




agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00



ESTATE




agents




1 Yes QUALIFIED 13/06/2018 12:55:19 27/10/2016 18:31:05



ESTATE




passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00



ESTATE




passivation





24/07/2019 14:03:40 limitation "only forpen application -

TYPE I Only"

10/01/2019 16:48:59



ESTATE




passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00



ESTATE






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 26/10/2016 16:00:12 16/01/2013 00:00:00



ESTATE





systems


systems


systems


25/02/2019 11:03:00 All parts for Two-coatchromate-free (CF)system and detailparts for Abrasion

Resistant PaintSystem

13/02/2019 15:41:24



02 Nov 2020 10:51

33/81




ess scope




ESTATE









16 Yes QUALIFIED 26/10/2016 16:00:12 16/01/2013 00:00:00



ESTATE







A3 Yes QUALIFIED 24/07/2019 14:13:07 10/01/2019 16:40:53



ESTATE




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 27/03/2020 14:22:55 22/05/2017 11:15:50



ESTATE




ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION


09/09/2014 00:00:00 None UK UK 14/12/2009 00:00:00



ESTATE




ETCH INSPECTION


inspection


inspection

2 Yes QUALIFIED 26/10/2016 16:00:12 21/09/2015 00:00:00



ESTATE






Detection




ESTATE







4 Yes QUALIFIED 26/10/2016 16:00:12 21/09/2015 00:00:00



ESTATE




DETECTION




ESTATE





12 Yes QUALIFIED 26/10/2016 16:00:12 21/09/2015 00:00:00



ESTATE









30/07/2019 16:19:16 limited to Method 6only.

30/07/2019 16:18:45

241040 HAUCK HEATTREATMENT LTD

BLACKHORSEROAD

LETCHWORTH SG6 1HD United Kingdom HEAT TREATMENTSPECIALISTS




expansion


nitriding



2 Yes QUALIFIED 13/05/2019 14:39:22 14/12/2009 00:00:00


BLACKHORSEROAD






9 Yes QUALIFIED 13/05/2019 14:39:22 14/12/2009 00:00:00


BLACKHORSEROAD








1-3 Yes QUALIFIED 13/05/2019 14:39:22 14/12/2009 00:00:00


BLACKHORSEROAD




alloys



8 Yes QUALIFIED 13/05/2019 14:39:22 14/12/2009 00:00:00


BLACKHORSEROAD






5 Yes QUALIFIED 13/05/2019 14:39:22 14/12/2009 00:00:00


BLACKHORSEROAD




ABP3-1366 CARBURISING ANDCARBO-NITRIDING


STEELS.

1 ABP3-1366 CARBURISING ANDCARBO-NITRIDING


STEELS.

1 Yes QUALIFIED 13/05/2019 14:39:21 14/12/2009 00:00:00


BLACKHORSEROAD








3-1 Yes QUALIFIED 13/05/2019 14:39:21 14/12/2009 00:00:00


BLACKHORSEROAD




materials




241047 WALTON PLATINGLIMITED

SIR RICHARDSBRIDGE

WALTON-ON-THAMES

KT12 1HN United Kingdom SURFACETREATMENTSPECIALISTS



passivation




NICKEL ALLOYS


NICKEL ALLOYS


06/02/2020 11:17:33 Method 1 only 19/11/2019 18:48:56


SIR RICHARDSBRIDGE

WALTON-ON-THAMES




ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION


19/11/2019 19:02:35 None UK UK 14/12/2009 00:00:00


SIR RICHARDSBRIDGE

WALTON-ON-THAMES






Detection


241049 WEST MIDDLESEXSURFACE

TREATMENTSLIMITED

UNIT 5CHARTRIDGE

DEVELOPMENT

UXBRIDGE UB8 2RT United Kingdom SURFACETREATMENTSPECIALISTS



agents






3 Yes QUALIFIED 05/03/2020 16:41:57 14/12/2009 00:00:00

241049 WEST MIDDLESEXSURFACE

TREATMENTSLIMITED

UNIT 5CHARTRIDGE

DEVELOPMENT

UXBRIDGE UB8 2RT United Kingdom SURFACETREATMENTSPECIALISTS



agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 14/11/2019 10:41:15 14/12/2009 00:00:00

241054 AALBERTSSURFACE

TREATMENTLIMITED

CLOVER STREET NOTTINGHAM NG17 7LJ United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED






2-1 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED





2 ABP1-1022 HARD ANODISINGOF ALUMINIUM

2-1 Yes AIPS/AITMCOMPLIANT WITH

LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED




aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED




aluminium alloys


aluminium alloys


ALUMINIUM

4 Yes AIPS/AITMCOMPLIANT WITH

LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED



02-03 Deposition Ion VapourDeposition IVD of

Aluminium

AIPS02-03-006 Ion VapourDeposition (IVD) of

Aluminium

2 AIPI02-03-006 Ion VapourDeposition (IVD) of

Aluminium

1 Yes QUALIFIED 26/10/2016 16:01:46 02/10/2012 00:00:00


TREATMENTLIMITED




passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED




passivation





LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED










4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



02 Nov 2020 10:51

34/81




ess scope



TREATMENTLIMITED





systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED





systems







18 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED





systems











11 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED





systems


systems



EXTERNALSURFACE


LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED





systems


systems





LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED





systems


systems







LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED









16 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED








OR EXTERNALSURFACE


LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED








EXTERNALSURFACE


LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED









LEGACYQUALIFICATION

24/03/2010 00:00:00 18/02/2010 00:00:00


TREATMENTLIMITED




DETECTION


241058 BODYCOTEBELGIUM

MERCATORSCIENCE PARK

BRUSSELS 1120 Belgium HEAT TREATMENTSPECIALISTS



general


General







alloys



8 Yes QUALIFIED 13/05/2019 14:41:39 14/12/2009 00:00:00






alloys


alloys


alloys

A3 Yes QUALIFIED 13/05/2019 14:41:39 16/12/2015 00:00:00

241069 HYCROMEAEROSPACE

LIMITED

WIDOW HILL ROAD BURNLEY BB10 2TT United Kingdom SURFACETREATMENTSPECIALISTS




for fastening


HOLES INMETALLIC

MATERIALS


HOLES INMETALLIC

MATERIALS

1 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED





TITANIUM


TITANIUM

2 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED




aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 26/02/2018 16:07:35 14/12/2009 00:00:00


LIMITED












A3 Yes QUALIFIED 15/02/2017 12:48:47 590.00 1000.00 1970.00 09/04/2015 00:00:00


LIMITED





expansion





4 Yes QUALIFIED 04/10/2019 08:38:44 14/12/2009 00:00:00


LIMITED





expansion


31/07/2018 08:43:24 Material Group II andGroup III

26/02/2018 13:33:15


LIMITED





expansion


of metal parts





9 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED





expansion


of metal parts


of metal parts


of metal parts

A3 Yes QUALIFIED 26/10/2016 16:05:38 06/11/2014 00:00:00


LIMITED







4-1 Yes QUALIFIED 14/02/2017 11:44:12 19/04/2016 14:28:07


LIMITED




agents




2 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED




agents





27/11/2017 10:13:08 LEGACY PARTSONLY

14/12/2009 00:00:00


LIMITED




passivation




6 Yes QUALIFIED 26/02/2018 15:59:29 14/12/2009 00:00:00



02 Nov 2020 10:51

35/81




ess scope



LIMITED




passivation





31/07/2018 08:39:52 Type 1 immersionand repair process

26/02/2018 13:33:08


LIMITED




passivation


Steel


Steel


Steel


26/07/2019 09:25:42 No pickling operation 26/02/2018 13:33:09


LIMITED




passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 20/08/2019 09:56:12 20/08/2019 09:55:33


LIMITED




Rework of scratchesin Aluminium alloyson external surfaces

ABP6-3204 RECTIFICATION OFSCRATCHES ONAN ALUMINIUMCLAD SURFACE

DURINGFABRICATION

6 ABP6-3204 RECTIFICATION OFSCRATCHES ONAN ALUMINIUMCLAD SURFACE

DURINGFABRICATION

6 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED






9 Yes QUALIFIED 26/02/2018 16:11:00 14/12/2009 00:00:00


LIMITED








1-3 Yes QUALIFIED 26/02/2018 14:03:29 25/03/2015 00:00:00


LIMITED






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 26/02/2018 15:42:57 14/12/2009 00:00:00


LIMITED






PAINTS



PAINTS


20/08/2019 10:04:14 With limitations onMethod 1, 4, 6 and 7.

20/08/2019 10:03:46


LIMITED





systems







18 Yes QUALIFIED 26/10/2016 16:05:37 23/07/2015 00:00:00


LIMITED





systems











11 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED





systems







8 Yes QUALIFIED 21/11/2018 15:44:01 09/02/2017 10:44:13


LIMITED





systems


systems


systems

A2 Yes QUALIFIED 26/10/2016 16:05:38 23/07/2015 00:00:00


LIMITED




APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED









16 Yes QUALIFIED 26/02/2018 15:48:39 14/12/2009 00:00:00


LIMITED







A3 Yes QUALIFIED 13/06/2018 16:05:39 26/02/2018 13:33:21


LIMITED







parts


parts

2 Yes QUALIFIED 26/10/2016 16:05:38 08/11/2011 00:00:00


LIMITED






PAINTBLAST )


PAINTBLAST )


26/10/2016 16:05:37 ABP4-4139METHOD 3

27/06/2014 00:00:00


LIMITED



05-05 Sealant Preservation of CutEdges of CarbonFibre CompositeParts to prevent

Galvanic Corrosionon attached Metal

Parts

AIPS05-05-009 Preservation of CutEdges of CarbonFibre CompositeParts to prevent


Parts

3 AIPI05-05-009 Preservation of CutEdges of CarbonFibre CompositeParts to prevent


Parts


26/10/2016 16:05:38 FOR CLASS 3PARTS ONLY

05/11/2012 00:00:00


LIMITED





D¿ETANCHEITESUR LA


L¿AVION


D¿ETANCHEITESUR LA


L¿AVION

16 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED


06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.

ABP5-1149 ADHESIVEBONDING WITH

TWO PARTEPOXY.( HYSOL

AND 3M )

4 ABP5-1149 ADHESIVEBONDING WITH

TWO PARTEPOXY.( HYSOL

AND 3M )

4 Yes QUALIFIED 20/12/2018 15:33:00 01/02/2017 14:53:32


LIMITED



27/02/2019 16:59:29 Only for TP2 09/10/2017 10:41:31


LIMITED






4 Yes QUALIFIED 31/08/2020 11:48:11 06/11/2014 00:00:00


LIMITED






3 Yes QUALIFIED 20/08/2019 10:21:01 26/02/2018 13:33:20


LIMITED




materials





LIMITED




materials







5 Yes QUALIFIED 13/09/2018 13:28:29 26/02/2018 16:23:16


LIMITED




ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION


31/08/2020 11:48:10 None UK UK 14/12/2009 00:00:00


LIMITED






Detection


Detection

3-2 Yes QUALIFIED 13/09/2018 13:28:29 26/02/2018 13:20:33


LIMITED




DETECTION



LIMITED








02 Nov 2020 10:51

36/81




ess scope



LIMITED



ALLOYS


ALLOYS


ALLOYS

7 Yes QUALIFIED 26/10/2016 16:05:37 21/09/2015 00:00:00

241070 HYTEK FINISHESCOMPANY

8127 SOUTH 216THSTREET

KENT 98032 USA SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







expansion





4 Yes QUALIFIED 12/04/2019 13:25:55 18/02/2010 00:00:00







expansion


of metal parts





9 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00









4-1 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






agents




1 Yes QUALIFIED 26/10/2016 16:20:36 02/05/2012 00:00:00






passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






passivation


Steel


Steel


Steel


26/10/2016 16:20:36 RESTRICTED TOINCONEL PARTS

OF THE NEOENGINE MOUNTS

23/10/2014 00:00:00








OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00








PAINTS



PAINTS

12 Yes QUALIFIED 17/11/2016 17:22:01 19/09/2015 00:00:00











5 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00












4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems


RESISTANT PAINT


RESISTANT PAINT

8 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems







8 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00











16 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






ABP4-3329 APPPLICATION OFAERODYNAMIC

FILLER SEALANT

4 ABP4-3329 APPPLICATION OFAERODYNAMIC

FILLER SEALANT

4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00








4 Yes QUALIFIED 12/04/2019 13:28:20 18/02/2010 00:00:00









4 Yes QUALIFIED 26/10/2016 16:21:44 17/12/2015 00:00:00






DETECTION













ALLOYS


ALLOYS


ALLOYS

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00

241072 KOREA HEATTREATMENT

29-2 PARYOUNG CHANGWON 51395 South Korea HEAT TREATMENTSPECIALISTS





5 Yes QUALIFIED 19/08/2020 15:05:18 14/12/2009 00:00:00

241085 SURFACETREATMENT

NEDERLAND BV

HAZENSPOOR 16 MAASBRACHT 6051 AB Netherlands SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 04/03/2020 10:03:29 18/02/2010 00:00:00


NEDERLAND BV




aluminium alloys


aluminium alloys

2 NA Yes QUALIFIED 04/03/2020 10:03:29 30/09/2014 00:00:00


NEDERLAND BV






2-1 Yes QUALIFIED 04/03/2020 10:03:23 18/02/2010 00:00:00


NEDERLAND BV




aluminium alloys


Sealing


Sealing



WORKBENCHONLY

03/07/2014 00:00:00


NEDERLAND BV




aluminium alloys





WORKBENCHONLY

30/04/2014 00:00:00


NEDERLAND BV




aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 04/03/2020 10:03:24 18/02/2010 00:00:00


NEDERLAND BV













04/03/2020 10:03:17 APID_0254: Dryingtime needs to be

adjusted in that wayfully drying of the

parts is ensured. Noresidual water in thepores is acceptableprior to subsequent

processes.

03/11/2014 00:00:00


NEDERLAND BV




passivation








WORKBENCHONLY

30/04/2014 00:00:00



02 Nov 2020 10:51

37/81




ess scope



NEDERLAND BV




passivation




6 Yes QUALIFIED 04/03/2020 10:03:18 18/02/2010 00:00:00


NEDERLAND BV




passivation




2 Yes QUALIFIED 04/03/2020 10:03:18 30/09/2014 00:00:00


NEDERLAND BV





base d'époxy)


base d'époxy)



WORKBENCHONLY

30/04/2014 00:00:00


NEDERLAND BV






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 04/03/2020 10:03:18 18/02/2010 00:00:00


NEDERLAND BV






General


General



WORKBENCHONLY

30/04/2014 00:00:00


NEDERLAND BV





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 04/03/2020 10:03:31 18/02/2010 00:00:00


NEDERLAND BV





systems







18 Yes QUALIFIED 04/03/2020 10:03:31 18/02/2010 00:00:00


NEDERLAND BV











WORKBENCHONLY

30/04/2014 00:00:00


NEDERLAND BV









16 Yes QUALIFIED 04/03/2020 10:03:30 18/02/2010 00:00:00


NEDERLAND BV








04/03/2020 10:03:32 LIMITED TOMETALLIC PARTS

10/09/2014 00:00:00


NEDERLAND BV







parts


parts



10/09/2014 00:00:00


NEDERLAND BV












WORKBENCHONLY

N/A N/A 30/04/2014 00:00:00


NEDERLAND BV





12 Yes QUALIFIED 04/03/2020 10:03:30 10/09/2014 00:00:00

245761 SGS TECNOS SA PASEO DE LASFLORES, 48

COSLADA MADRID 28823 Spain NDT SPECIALISTSGP-3-213B

INDUSTRIALSERVICES











Powder Bed Fusion

21/08/2015 00:00:00

245761 SGS TECNOS SA PASEO DE LASFLORES, 48

COSLADA MADRID 28823 Spain NDT SPECIALISTSGP-3-213B

INDUSTRIALSERVICES




I+D-E-138 Radiographicinspection

E NA Yes QUALIFIED 13/09/2018 13:21:16 NA NA 21/11/2011 00:00:00

249224 TRATAMIENTOSTERMICOS T.T.T.,

S.A.

CR ELGUETA SN BERGARA 20570 Spain HEAT TREATMENTSPECIALISTS




expansion

Carburizing of Steel I+D-P-217 Carburizing 2 I+D-P-217 Carburizing 2 Yes QUALIFIED 13/05/2019 14:44:09 01/10/1999 00:00:00


S.A.




general


General



S.A.



Gasnitrieren 80-T-36-3050 Gasnitrieren 80-T-36-3050 Gasnitrieren Yes QUALIFIED 13/05/2019 14:44:10 06/04/2016 11:12:38


S.A.







09/06/2020 09:49:19 Carbon and alloyssteels for quenching

and temperingprocess. Stress relief

only

04/06/2014 00:00:00


S.A.




I+D-P-225 HEAT TREATMENTOF CARBONSTEELS AND

ALLOY STEELS

A7 I+D-P-225 HEAT TREATMENTOF CARBONSTEELS AND

ALLOY STEELS


09/06/2020 09:53:11 Carbon and alloyssteels for quenching

and temperingprocess. Stress relief

only

07/10/2019 21:56:39


S.A.




I+D-P-226 HEAT TREATMENTOF STAINLESS AND

REFRACTORYSTEELS

A5 I+D-P-226 HEAT TREATMENTOF STAINLESS AND

REFRACTORYSTEELS


09/06/2020 09:57:34 Only for PrecipitationTreatment

07/10/2019 22:04:51

249929 ASCOT 225 ALLEEEMILAND GAUTHEY

LE CREUSOT 71200 France NDT SPECIALISTS Non DestructiveTesting




13/09/2018 13:21:16 ONLY FORPICKLED PARTS

FR FR 18/10/2013 00:00:00












Powder Bed Fusion

FR;NO FR;NO ; 13/05/2009 00:00:00





techniques



array»



array»


13/09/2018 13:22:33 QCS150094;QCS151026;

QCS151027;QCS161254 and

QCS161527

QCS151026;QCS150094;QCS151027;QCS16

1254

Inspection ofPEEK/Carbon Fabric

laminate, PartFamily: A350-900

clips;Qualification forNDT inspection ofASCOT, Creusot

Plant ofBulkhead;inspection

of A350PEEK/Carbon Fabric

laminate acc toAITM6-4005,Issue10;A350- 1000 AirInlet Aft Bulkheadmade of Prepreg

8552

Material Type:Carbon fibre

reinforced PEEK(Poly Ether Ketone);

No copper mesh;Thickness range:1.;Material Type:monolithic carbonfiber of 16 to 37

plies- AGP280 / 37%/ 8552S; No coppermesh and g;aterialType: Carbon fibre

reinforcedPEEK(Poly EtherEther Ketone); Nocopper mesh; Part

Family: A3;Material:CFRP made ofprepreg 8552

Structure build-up,part family:

monolithic, radii: 7mm to 20 m

18/12/2015 00:00:00









13/09/2018 13:22:32 QCS150093;QCS151027;QCS161253,

QCS161528,QCS170268

GE;QCS150093;QCS 151027;QCS:150093 AND

QCS;QCS161253;QCS161528;QCS1702

68

GE;Qualification forNDT inspection ofASCOT, CreusotPlant of BulkheadA350-1000 using

Manual PulseEc;Inspections of

A350 PEEK/CarbonFabric laminate Part

Family: A350-900clips;QCS:150093

ANDQCS151027;A350-1000 Air Inlet Aft

Bulkhead made ofPrepreg

8552;Inspection ofPEEK/Carbon Fabriclaminate Part Family:

A350 clips;NDTtechnique: Ultrasonic

pulse echoinspection of carbon

fibre plastics inaccordance with

AITM 6-4

;MONOLITHIC FLATAND RADIUS

AREAS OF A350-1000 AIR INLETAFTBULKHEAD

SECTION 1H, 6H& 9H

PARTS;MaterialType: Carbon fibrereinforced PEEK

(Poly Ether Ketone);No copper mesh ;

Thickness range: 1;;Material: CFRPmade of prepreg

8552 Structure build-up, part family:

monolithic, radii: 7mm to 20 m;MaterialType: Carbon fibrereinforced PEEK

(Poly Ether Ketone);Composite carbonfabrics reinforced

polyphenylenesulphide resin

Structure build up:Monolithic, aft

18/12/2015 00:00:00



02 Nov 2020 10:51

38/81




ess scope




Ultrasonic Ultrasonic pulse-echo inspection of

areas aroundfastener and rivet

holes in composites

AITM6-4022 Contrôle parultrasons en échod'impulsions deszones autour des

trous de fixations etde rivets dans les

matériauxcomposites

3 AITM6-4022 Contrôle parultrasons en échod'impulsions deszones autour des




13/09/2018 13:22:33 QCS150095 andQCS161455

QCS150095;QCS161455

Qualification for NDTinspection of

ASCOT, CreusotPlant of BulkheadA350-1000;A350-1000 Air Inlet Aft

Bulkhead made ofPrepreg 8552

MATERIAL TYPE:MONOLITHIC

CARBON FIBER OF16 TO 37 PLIESAGP 280 /37% /

8552S; NO COPPERMESH AND

GL;Material: CFRPmade of prepreg

8552 Structure build-up, part family:

monolithic, radii: 7mm to 20 m

18/12/2015 00:00:00



Ultrasonic Ultrasonic testing ofmetallic materials:


blanks

IGC04-25-115 CONTROLE PARULTRASONS DESproduits ET sEMI

PRODUITSMETALLIQUES

(épaisseur > 6mm)

B NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

04/07/2019 14:55:14 NON CYLINDRICALPARTS

CNF ID 1308 LONGERONINFERIEUR A320 -Catégorie C-LE S1D

546 30

LONGERONINFERIEUR A320

14/05/2019 09:10:11


LIMITED

WESTGATE SKELMERSDALE WN8 8AZ United Kingdom HEAT TREATMENTSPECIALISTS




80-T-34-8000 Brazing 80-T-34-8000 Brazing Yes QUALIFIED WITHLIMITATIONS

08/09/2020 11:17:34 Only for High-temperature brazing

according to 80-T-34-8200 on parts

A282.70871 andA282.70912

18/12/2019 14:36:52


LIMITED





80-T-34-8200 High - temperatureBrazing

80-T-34-8200 High - temperatureBrazing


08/09/2020 11:25:09 Only for partsA282.70871 and

A282.70912

18/12/2019 14:40:50


LIMITED






5 Yes QUALIFIED 13/05/2019 14:54:17 14/12/2009 00:00:00

255964 EAST LANCASHIREPLATERS LIMITED

OXFORD MILL BURNLEY BB11 3BA United Kingdom SURFACETREATMENTSPECIALISTS




expansion





4 Yes QUALIFIED 14/11/2019 10:43:10 14/12/2009 00:00:00





agents






3 Yes QUALIFIED 14/11/2019 10:43:11 14/12/2009 00:00:00





agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 14/11/2019 10:43:11 14/12/2009 00:00:00





agents




2 Yes QUALIFIED 14/11/2019 10:43:11 14/12/2009 00:00:00





passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 14/11/2019 10:43:10 17/05/2013 00:00:00





passivation



3 Yes QUALIFIED 14/11/2019 10:43:11 14/12/2009 00:00:00





ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION








Detection






DETECTION








30/06/2020 18:53:32 limited to preparationprior to Cadmium

plating (ABP1-4041)& prior to HardChrome plating(ABP1-4042).

30/06/2020 18:52:43










30/06/2020 19:01:55 limited to preparationprior to Cadmium

plating (ABP1-4041)& prior to HardChrome plating(ABP1-4042).

30/06/2020 19:00:56

256012 ELEMENTMATERIALS

TECHNOLOGYCLEVELAND -MIDDLEBURGHEIGHTS INC

6840 LAKE ABRAMDRIVE

MIDDLEBURGHEIGHTS

44130 USA NDT SPECIALISTS Non DestructiveTesting


DETECTION


13/09/2018 13:22:26 DOES NOTPERFORM ON SITE

ETCHING

UK UK 18/02/2010 00:00:00




MIDDLEBURGHEIGHTS





13/09/2018 13:24:18 ALP installation withnon re-usedpenetrant ofsensibility 2.

19/11/2015 00:00:00




MIDDLEBURGHEIGHTS


Ultrasonic Inspection,Ultrasonic, WroughtMetals, Process For

AMS-2154 Inspection,Ultrasonic, WroughtMetals, Process for

D AMS-2154 Inspection,Ultrasonic, WroughtMetals, Process For

A Yes QUALIFIED WITHLIMITATIONS

23/10/2019 14:05:12 QCS 191140:NDI method: Manual

or automatedimmersion inspectionby ultrasonic pulse-echo technique inaccordance with

prEN4050 class 3and/or AMS-STD-

2154 Class AStructure build up,part family: roundand hollow bars,

copper alloy(Cu15Ni8Sn) inaccordance with

material specificationABS5849 &ABS5152

Surface dead zone:The allowable deadzone for longitudinalwave inspection shallbe 0,080" (2mm) or0,118" (3mm) fornear surface and

0,080" (2mm) fromback surface as per

technique card &P.O.

Thickness range: asper materialspecificationABS5849 &ABS5152

191140;QCS170614;QCS170673;QCS17

0674

Technicalqualification for NDIof ABS5152 &ABS58;Automated

immersion ultrasonicpulse-echo

techniqu;Automatedimmersion ultrasonic

pulse-echotechniqu;Automatedimmersion ultrasonicpulse-echo techniqu

round and hollowbars, copper alloy(Cu15Ni8Sn) inaccordance with

material specificationABS5849 &

;NDI method:Automated

immersion ultrasonicpulse-echo technique

;Material: Plates

according to ABS;NDI method:Automated


;Material: Haynes 718Alloy (ABS544;NDImethod: Automatedimmersion ultrasonicpulse-echo technique

;Material: Plates

according to ABS

14/02/2017 20:26:58




MIDDLEBURGHEIGHTS


Ultrasonic Test method formetallic materials -



EN4050 Aerospace series –Test method for

metallic materials -Ultrasonic inspection

of bars, plates,forging stock andforgings – Part 1:

Generalrequirements

EN4050 Test method formetallic materials -




23/10/2019 14:15:37 QCS170673: Manualultrasonic pulse echoimmersion inspection

acc to prEN 4050Class 5 of Inconel

718 Plates(ABS5441)

QCS191140:NDI method: Manual

or automatedimmersion inspectionby ultrasonic pulse-echo technique inaccordance with

prEN4050 class 3and/or AMS-STD-

2154 Class AStructure build up,part family: roundand hollow bars,


material specificationABS5849 &ABS5152

Surface dead zone:The allowable deadzone for longitudinalwave inspection shallbe 0,080" (2mm) or0,118" (3mm) fornear surface and

0,080" (2mm) fromback surface as per

technique card &P.O.

Thickness range: asper materialspecificationABS5849 &ABS5152

QCS170673;QCS170674;QCS191140

Automatedimmersion ultrasonic

pulse-echotechniqu;Automatedimmersion ultrasonic

pulse-echotechniq;Manual or

automatedimmersion inspection

by ultras

NDI method:Automated



;Material: Plates

according to ABS;Structure build up,part family: roundand hollow bars,


10/08/2017 17:45:03



02 Nov 2020 10:51

39/81




ess scope





MIDDLEBURGHEIGHTS



DETECTION


DETECTION


DETECTION

6 Yes QUALIFIED 13/09/2018 13:22:26 UK UK 18/02/2010 00:00:00




MIDDLEBURGHEIGHTS


Ultrasonic Ultrasonic Inspection,Titanium and

Titanium Alloy Bar,Billet and Plate

SAEAMS2631D Ultrasonic InspectionTitanium and

Titanium Alloy Bar,Billet and Plate

SAEAMS2631D R UltrasonicInspection Titaniumand Titanium AlloyBar, Billet and Plate


19/09/2019 14:40:34 Manual QCS170614;QCS170673;QCS170674

Automatedimmersion ultrasonic

pulse-echotechniqu;Automatedimmersion ultrasonic

pulse-echotechniqu;Automatedimmersion ultrasonicpulse-echo techniqu

NDI method:Automated


;Material: Plates

according to ABS;NDI method:Automated



;Material: Plates

according to ABS

14/02/2017 21:46:50

256270 AEROPROTEC 6 RUE VINCENTAURIOL

PAU 64000 France SURFACETREATMENTSPECIALISTS




fixations )






aluminium alloys



N NO_AIRBUS_PI Yes QUALIFIED 24/03/2010 00:00:00 11/03/2005 00:00:00





aluminium alloys


aluminium alloys

2 NA Yes QUALIFIED 27/10/2016 13:51:53 11/01/2016 00:00:00





aluminium alloys









expansion


13/10/2017 10:08:12 blasting before theelectrolytic coating orother processes onsteel only (weeklyroughness check

done on test sample)

04/02/2016 09:21:55





agents




27/10/2016 13:51:53 MEO TYPES 1 ET 2ACIER R < 1450

MPA

19/01/2015 00:00:00





passivation









passivation




2 Yes QUALIFIED 27/10/2016 13:51:53 31/03/2015 00:00:00







24/03/2010 00:00:00 MEO TYPES 1 ET 2ACIER R < 1450

MPA

11/03/2005 00:00:00






Paint


Paint


Paint

A3 Yes QUALIFIED 27/10/2016 13:51:53 23/02/2012 00:00:00








A3 Yes QUALIFIED 27/10/2016 13:51:53 06/01/2015 00:00:00





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 27/10/2020 15:40:09 23/07/2018 16:29:41








4 Yes QUALIFIED 27/10/2016 13:51:53 06/01/2015 00:00:00







MAGNETOSCOPIE








27/10/2016 13:51:52 No internally etchingcapabilities on CRESand Titanium alloys.

PCR 36-H PCR 36-H 06/01/2015 00:00:00




alloys




257992 LEUZE CO.KUNSTSTOFF-

BESCHICHTUNGENGMBH CO.KG

INDUSTRIESTR. 7 RENNINGEN 71272 Germany SURFACETREATMENTSPECIALISTS



Powder coating ofmetallic parts

80-T-35-5601 Whirl Sintering 80-T-35-5601 Whirl Sintering Yes QUALIFIED 04/03/2020 09:57:39 05/05/2009 00:00:00

258324 STEN 21 23 RUE ROBERTSCHUMAN

OZOIR LAFERRIERE




aluminium alloys


aluminium alloys



OZOIR LAFERRIERE






10/02/2020 09:38:11 PASD'APPLICATION DE

PEINTUREAUTORISÉE

27/06/2008 00:00:00


OZOIR LAFERRIERE







FUNG GMBH

JULIUS-LEBER-WEG 24

STADE 21684 Germany NDT SPECIALISTSAFM-003-4 TESTLAB GP-3-213B

INDUSTRIALSERVICES


03-02 Compositestructural, non-

metallic

Manufacturing ofCFRP and GFRP

with thermosetprepreg material

AIPS03-02-019 Manufacture ofMonolithic Parts withThermoset Prepreg

Materials

11 AIPI03-02-019 Manufacture ofMonolithic Parts withThermoset Prepreg

Materials


03/04/2018 11:35:05 LIMITED TO TESTSPECIMENS

MANUFACTURINGNOT FOR PART

MANUFACTURING.

18/07/2013 00:00:00


FUNG GMBH

JULIUS-LEBER-WEG 24


INDUSTRIALSERVICES









3 Yes QUALIFIED 13/09/2018 13:20:20 05/12/2014 00:00:00


FUNG GMBH

JULIUS-LEBER-WEG 24


INDUSTRIALSERVICES



materials







5 Yes QUALIFIED 13/09/2018 13:20:20 31/03/2015 00:00:00


FUNG GMBH

JULIUS-LEBER-WEG 24


INDUSTRIALSERVICES



detection







3 Yes QUALIFIED 13/09/2018 13:20:21 31/03/2015 00:00:00


FUNG GMBH

JULIUS-LEBER-WEG 24


INDUSTRIALSERVICES







1 Yes QUALIFIED 13/09/2018 13:22:29 31/03/2015 00:00:00


FUNG GMBH

JULIUS-LEBER-WEG 24


INDUSTRIALSERVICES




techniques



array»



array»

6 Yes QUALIFIED 13/09/2018 13:21:16 QCS0101059 QCS0101059 18/07/2011 00:00:00


FUNG GMBH

JULIUS-LEBER-WEG 24


INDUSTRIALSERVICES







11 Yes QUALIFIED 13/09/2018 13:25:10 130424;QCS0101059

Manual ultrasonicpulse echo radii

inspection of M21Etape and M21 fabric

in A350XWBstiffener;QCS010105

9

1,00mm - 6,00mm; 18/07/2011 00:00:00



02 Nov 2020 10:51

40/81




ess scope



FUNG GMBH

JULIUS-LEBER-WEG 24


INDUSTRIALSERVICES




holes in composites








13/09/2018 13:20:20 LIMITED TOQCS130525

ULTRASONICPULSE-ECHO

INSPECTION OFAREAS AROUNDFASTENER ANDRIVET HOLES IN

COMPOSITES (NDIMETHOD: MANUAL

ULTRASONICPULSE-ECHO

INSPECTION OFAREAS AROUNDDRILLED HOLES

QCS130525 QCS130525 02/04/2014 00:00:00


FUNG GMBH

JULIUS-LEBER-WEG 24


INDUSTRIALSERVICES


Ultrasonic US pulse-echoinspection of GlassFiber Reinforced

Plastic

AITM6-4012 Ultrasonic pulse-echo inspection of

glass fibre reinforcedplastics

4 AITM6-4012 Ultrasonic pulse-echo inspection of

glass fibre reinforcedplastics


264863 IONBOND PVDFRANCE

25 RUE DESFRERES LUMIERE

CHASSIEU 69680 France SURFACETREATMENTSPECIALISTS




aluminium alloys




27/10/2016 13:53:00 MACHINE AUZERHTC 1500 POUR LE

TA6V

19/02/2008 00:00:00







aluminium alloys










agents


Deposition


Deposition


02/06/2020 13:23:52 TRAITEMENT :FOUR HAUZER.LIMITED TO 2FURNACES

IDENTIFIED AS HC214 AND HC 143.

ONLY ONE (1)REWORK

AUTHORIZEDFOLLOWING

SUPPLIER WORKINSTRUCTIONS ILMO RP.16 Indice 5:Valid for Inconel and

Stainless Steels.Valid for Titaniumalloys excluding

fatigue critical parts.

04/12/2015 00:00:00

266307 STI FRANCE SA ROUTE DE PAU OLORON ESCOUT 64870 France SURFACETREATMENTSPECIALISTS



agents




16/09/2020 11:47:35 GROUDINGPERFORMED IN-

SITU AND ATCBRECTIF (PLANEAND CYLINDRICAL

GROUNDING),HARD CHROMIUM

TREATMENTWITHOUT NICKEL

SUB-LAYERALLOWED

26/11/2015 00:00:00

268187 GIT TRAITEMENT 7 RUE JOSEPHMARIE JACQUARD

CUGNAUX 31270 France SURFACETREATMENTSPECIALISTS



aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 19/12/2019 14:01:00 3000.00 10000.00 600.00 01/07/2015 00:00:00













A3 Yes QUALIFIED 19/12/2019 14:04:49 700.00 7500.00 2700.00 27/07/2017 11:31:38





passivation





08/03/2019 14:34:35 IMMERSION ONLY,ON LINE C

01/07/2015 00:00:00










01/07/2015 00:00:00








parts


parts


LIMITATIONS

2021-02-28 30/07/2020 14:28:23 Aluminium alloys 27/08/2019 17:25:13





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 11/02/2019 17:02:28 27/07/2017 15:15:37







19/01/2017 17:04:37 ALUMINIUMALLOYS ONLY

19/05/2016 15:05:57

268862 ANODIZING ANDPAINT TNM INC

21 CHEMIN DELAVIATION

POINTE-CLAIRE H9R 4Z2 Canada SURFACETREATMENTSPECIALISTS












13/08/2020 14:28:06 Parts to besubsequently painted

or post treated bydichromate sealing.

05/02/2016 17:27:57






passivation





13/03/2018 15:36:41 Local application only 13/12/2016 19:46:22






passivation







13/03/2018 15:36:40 Metalic substrate 13/12/2016 19:39:42






passivation




15/04/2020 13:07:19 ONLY FOR ATR42/72

30/04/2013 00:00:00








METALL

A5 Yes QUALIFIED 13/08/2020 14:33:39 03/08/2015 00:00:00








General


General


13/08/2020 14:29:27 Metallic substrate 13/12/2016 19:37:31







systems


Abrasion-Resistant


Abrasion-Resistant

Yes QUALIFIED 13/08/2020 14:34:56 13/12/2016 19:52:23












13/08/2020 14:31:13 Metalic substrate 13/12/2016 19:42:01












13/08/2020 14:36:10 Metalic parts 13/12/2016 19:44:06










13/08/2020 11:51:17 Metallic parts 05/02/2016 17:33:32








3 Yes QUALIFIED 13/03/2018 15:36:37 24/05/2016 16:29:31






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 13/09/2018 13:22:31 05/02/2016 17:35:38








13/09/2018 13:24:21 ALUMINIUM ANDTITANIUM ALLOYS

NONE NONE 29/11/2013 00:00:00

269004 OTOBERFLAECHENTECHNIK GMBH CO

KG SCHWERIN

WERKSTR. 115 SCHWERIN 19061 Germany SURFACETREATMENTSPECIALISTS



Generalrequirements for

welding and alliedprocesses

80-T-34-6620 Inert Gas FusionWelding (TIG)

80-T-34-6620 Inert Gas FusionWelding (TIG)


04/03/2020 10:01:12 Limited to extendedworkbench activities

(no tier 1)

01/03/2019 15:35:45



02 Nov 2020 10:51

41/81




ess scope



KG SCHWERIN





expansion







02/09/2009 00:00:00


KG SCHWERIN





expansion


of metal parts

80-T-35-0205 Shot Peening 80-T-35-0205 Shot Peening Yes QUALIFIED WITHLIMITATIONS




18/12/2008 00:00:00


KG SCHWERIN





expansion

Wet blasting 80-T-35-0204 Abrasive Blasting -Vapour Lapping -

80-T-35-0204 Abrasive Blasting -Vapour Lapping -





02/09/2009 00:00:00


KG SCHWERIN









AP2190.0 FORDEFINITION),1.4544: SOFT-

ANNEALING (W1)AND 1.4943: AGING

(WH4)

02/09/2009 00:00:00


KG SCHWERIN






23/10/2020 09:35:05 IA3d and IC3dNo internal etchingcapabilities. Etchingshall be performed

externally whenrequired.

23/10/2020 09:30:41


KG SCHWERIN






18/12/2008 00:00:00

269014 CONTROREM 46 RUE DE FREGY FONTENAYTRESIGNY






4 Yes QUALIFIED 13/09/2018 13:24:20 06/01/2016 00:00:00






MAGNETOSCOPIE







13/09/2018 13:22:29 ETCHINGOPERATIONPERFORMEDEXTERNALLYPenetrant Type

1.a.2,Type 1.d.3 andType I.d.4 +a/d

06/01/2016 00:00:00

270602 AFRICAN NDTCENTRE PTY

LIMITED

520 VANREYNEVELD

AVENUE

PRETORIA 45 South Africa NDT SPECIALISTS Non DestructiveTesting


DETECTION

13 NA Yes AUTHORISATIONTO PROCEED

2020-12-31 29/07/2020 13:18:21 UK UK 14/12/2009 00:00:00


LIMITED

520 VANREYNEVELD

AVENUE





2020-12-31 29/07/2020 13:16:23 TW0283 TW0283 24/10/2011 00:00:00


LIMITED

520 VANREYNEVELD

AVENUE









LIMITATIONS

2020-12-31 29/07/2020 13:20:18 Except inspection ofparts made by


Powder Bed Fusion

TW0284 TW0284 24/10/2011 00:00:00


ZONEINDUSTRIELLE

DAMILLY

AMILLY 45200 France SURFACETREATMENTSPECIALISTS




expansion






2020-12-30 24/08/2020 09:27:15 18/02/2010 00:00:00


ZONEINDUSTRIELLE

DAMILLY





expansion


of metal parts






29/10/2020 23:31:34 Only Micro 2 andSRM robot

18/02/2010 00:00:00


ZONEINDUSTRIELLE

DAMILLY





expansion


of metal parts


REQUIREMENTS


REQUIREMENTS

4 Yes QUALIFIED 24/08/2020 09:24:58 24/08/2020 09:22:19


ZONEINDUSTRIELLE

DAMILLY





expansion


of metal parts


of metal parts


of metal parts


24/08/2020 09:24:58 Manual Shot Peeningwith Pressure potnumber n°4, n°5,n°2063 and n°10.

No Decontaminationprocess done in-situ

30/03/2018 11:50:22

270931 MORRELLSELECTRO PLATING

INC

432 EUCLIDAVENUE

COMPTON 90222 USA SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 18/04/2019 14:03:23 18/02/2010 00:00:00


INC

432 EUCLIDAVENUE






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 18/04/2019 14:05:35 18/02/2010 00:00:00


INC

432 EUCLIDAVENUE





y Paint





1 Yes QUALIFIED 18/04/2019 14:51:49 18/02/2010 00:00:00


INC

432 EUCLIDAVENUE





systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 18/04/2019 14:08:45 18/02/2010 00:00:00


INC

432 EUCLIDAVENUE





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 18/04/2019 14:12:22 18/02/2010 00:00:00


INC

432 EUCLIDAVENUE




DETECTION


271381 AEROTECHINSPECTION AND

NDT LIMITED

CHARLTON DRIVE CRADLEY HEATH B64 7BJ United Kingdom NDT SPECIALISTS Non DestructiveTesting




Detection



NDT LIMITED



DETECTION



NDT LIMITED





For processing ofparts with ABP 6-

5230 only

06/02/2020 15:02:36


NDT LIMITED







NDT LIMITED









29/05/2020 16:24:43 Film radiography +Computed

Radiography iawASTM-E2033 andASTM-E2445 only

with GE CR X Flex 2- SN:2059 &

SN:2182 & SN:2253- Imaging plate:FUJI

UR-1 /Resolution:50µm

Except inspection ofparts made by


Powder Bed Fusion

TW0318 TW0318 02/02/2012 00:00:00



02 Nov 2020 10:51

42/81




ess scope



TECHNOLOGY

BLACKBROOKBUSINESS PARK

DUDLEY DY2 0XQ United Kingdom NDT SPECIALISTS Non DestructiveTesting




Detection



TECHNOLOGY

BLACKBROOKBUSINESS PARK

DUDLEY DY2 0XQ United Kingdom NDT SPECIALISTS Non DestructiveTesting


DETECTION


275408 GENERALENGINEERINGTREATMENTS

LIMITED

6 VANGUARD WAY SHOEBURYNESS SS3 9QY United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 27/10/2016 14:06:11 13/01/2014 00:00:00


LIMITED




aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 27/10/2016 14:06:12 07/01/2015 00:00:00


LIMITED












A3 Yes QUALIFIED 27/10/2016 14:06:12 08/08/2011 00:00:00


LIMITED





expansion



Yes QUALIFIED 27/10/2016 14:06:10 28/07/2016 08:34:53


LIMITED





expansion





4 Yes QUALIFIED 30/01/2019 11:53:13 14/12/2009 00:00:00


LIMITED





expansion



LIMITED







4-1 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED





ABP1-3039 DEPOSITION OFALUMINIUMSPRAYING

2 ABP1-3039 DEPOSITION OFALUMINIUMSPRAYING

2 Yes QUALIFIED 30/01/2019 11:03:57 14/12/2009 00:00:00


LIMITED






Process

2 ABP1-3039 DEPOSITION OFALUMINIUMSPRAYING


LEGACYQUALIFICATION

24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED



02-03 Deposition Deposition of Zinc bythe Thermal Spray

Process

AIPS02-03-005 Deposition of Zinc bythe Thermal Spray

Process

2 AIPI02-03-005 Deposition of Zinc bythe Thermal Spray

Process

1 Yes QUALIFIED 28/01/2019 18:43:45 15/01/2013 00:00:00


LIMITED




agents






3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED




agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED




passivation




6 Yes QUALIFIED 27/10/2016 14:06:11 13/01/2014 00:00:00


LIMITED




passivation




2 Yes QUALIFIED 27/10/2016 14:06:12 15/01/2013 00:00:00


LIMITED




passivation


Steel


Steel


Steel

2 Yes QUALIFIED 27/10/2016 14:06:12 15/01/2013 00:00:00


LIMITED




passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED




passivation



3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED






A2 Yes QUALIFIED 28/01/2019 18:46:28 15/01/2013 00:00:00


LIMITED








3-1 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED






General


General

Yes QUALIFIED 27/10/2016 14:06:11 07/07/2015 00:00:00


LIMITED










4 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED





surfaces


surfaces



LIMITED





systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED





systems







18 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED





systems











11 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00



02 Nov 2020 10:51

43/81




ess scope



LIMITED





systems







8 Yes QUALIFIED 26/11/2019 08:36:20 17/08/2015 00:00:00


LIMITED





systems


systems


systems


15/02/2019 11:03:29 Limited to All partsfor Two-coat

chromate-free (CF)system and detailparts for Abrasion

resistant paintsystem”

17/06/2016 09:49:01


LIMITED




APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED









Yes QUALIFIED 27/10/2016 14:06:11 07/07/2015 00:00:00


LIMITED










27/10/2016 14:06:11 Limitation to protectpartmarking only

28/07/2016 08:19:52


LIMITED









Yes QUALIFIED 27/10/2016 14:06:11 07/07/2015 00:00:00


LIMITED









16 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00


LIMITED







A3 Yes QUALIFIED 20/04/2020 09:31:43 11/12/2014 00:00:00


LIMITED


07 Electrical 07-01 Assembly Electrical bonding ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY

9 ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY


19/08/2020 15:50:54 Surface PreparationOnly

26/03/2019 12:42:22


LIMITED



27/10/2016 14:07:57 RESTRICTED TOMASKING ONLY IN

ACCORDANCEWITH THE

SPECIFICATION.

18/04/2016 14:36:53


LIMITED





Acid -


Acid -

Yes QUALIFIED 27/10/2016 14:06:10 28/07/2016 08:27:32


LIMITED




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 25/02/2019 11:09:28 10/01/2019 16:33:52


LIMITED










3 Yes QUALIFIED 13/09/2018 13:26:07 14/02/2017 16:20:52


LIMITED




materials





LIMITED




materials







5 Yes QUALIFIED 28/01/2019 19:14:03 AITM6-6004 AITM6-6004 26/04/2011 00:00:00


LIMITED




ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION


28/01/2019 19:15:46 None UK UK 14/12/2009 00:00:00


LIMITED




ETCH INSPECTION


inspection


inspection

2 Yes QUALIFIED 27/10/2016 14:07:57 11/03/2015 00:00:00


LIMITED






Detection



LIMITED









LIMITED




DETECTION


DETECTION

12 Yes QUALIFIED 27/10/2016 14:06:11 10/12/2015 00:00:00


LIMITED





12 Yes QUALIFIED 27/10/2016 14:07:57 AITM 6-1001 AITM 6-1001 26/04/2011 00:00:00


LIMITED




24 RUE JEANFRANCOIS ROMIEU

MURET 31607 France SURFACETREATMENT

SPECIALISTS AFM-003-4 TEST LAB




alloys


alloys


10/06/2014 00:00:00 UNPAINTED ANDUNSEALED PARTS

06/06/2014 00:00:00







aluminium alloys



H AIPI02-01-002 Sulphuric acidanodising of

aluminium alloys

2 Yes QUALIFIED 29/06/2012 00:00:00 29/06/2012 00:00:00







aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 29/06/2012 00:00:00 29/06/2012 00:00:00















A3 Yes QUALIFIED 05/02/2018 09:11:15 230.00 90.00 80.00 11/10/2012 00:00:00








expansion








passivation





06/11/2018 14:41:47 ONLY MANUALAPPLICATION FOR

TEMPORAYPROTECTION (RE

PAINTAPPLICATION NOT

ALLOWED)

25/07/2011 00:00:00



02 Nov 2020 10:51

44/81




ess scope








passivation


Steel


Steel


Steel

2 Yes QUALIFIED 06/11/2018 14:42:33 15/03/2011 00:00:00







passivation






Steel


31/01/2018 13:22:43 80-T-35-1201passivation withAIPI02-05-005

requirements onferritic and

martensitic corrosionresistant steel only

25/01/2018 14:47:09









OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 18/11/2010 00:00:00 18/11/2010 00:00:00








systems


systems


systems


06/11/2018 14:41:47 ONLY DETAILPARTS

15/03/2011 00:00:00












16 Yes QUALIFIED 18/11/2010 00:00:00 18/11/2010 00:00:00











10/06/2013 00:00:00 DEVICES A, B, C, D,E, F, G (INCLUDEDTHE ROBOT IN THE

PAINT SHOP G)

07/06/2013 00:00:00






02/08/2018 07:54:34 LIMITATION SP7TP2 ONLY

08/03/2018 10:26:13








Acid -

AIPI09-02-005 Pickling of Titaniumand its alloys


17/09/2020 16:47:35 QUALIFICATIONFOR PICKLINGPRIOR TO FPI.

ONLY FOR NONPAINTED PARTS; IF

PAINT MUST BEAPPLIED A

BLASTING ISMANDATORY

ACCORDING TOIF601220003 + IF 54

2210001 FORPAINT.

07/07/2016 14:45:16










17/09/2020 16:48:49 ONLY FOR NONPAINTED PARTS; IF

PAINT MUST BEAPPLIED A

BLASTING ISMANDATORY

ACCORDING TOIF601220003 + IF 54

2210001 FORPAINT.

28/03/2012 00:00:00



















1 Yes QUALIFIED 06/11/2018 14:41:47 17/07/2012 00:00:00







anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 16/09/2020 14:08:26 08/02/2018 12:12:02







materials







5 Yes QUALIFIED 04/04/2018 10:11:29 11/09/2017 15:23:56








12 Yes QUALIFIED 06/11/2018 14:41:47 AIPS 00 00 006 AIPS 00 00 006 05/04/2011 00:00:00

276077 IONBONDPVDFRANCE

510 RUE DE LAPAIX

GRISOLLES 82170 France SURFACETREATMENTSPECIALISTS




aluminium alloys




30/01/2020 10:36:03 RÉACTEUR PVD64SUR MATÉRIAUX

INCONEL, MARVALET Z6 NT 18/10

26/10/2007 00:00:00

276077 IONBONDPVDFRANCE

510 RUE DE LAPAIX

GRISOLLES 82170 France SURFACETREATMENTSPECIALISTS




aluminium alloys





276249 TITANIA, ENSAYOSY PROYECTOSINDUSTRIALES

S.L.U

CR DE SANLUCARKM. 7

EL PUERTO DESANTA MARIA

CADIZ

11500 Spain TEST LAB GP-3-213B INDUSTRIAL

SERVICES


02-01 Anodizing Phosphoric sulphuricanodising PSA ofaluminium alloysprior to stuctural

bonding

AIPS02-01-006 Phosphoric SulphuricAnodising (PSA) ofAluminium Alloysprior to Structural

Bonding

3 AIPI02-01-006 Phosphoric SulphuricAnodising (PSA) ofAluminium Alloysprior to Structural

Bonding

A1 Yes QUALIFIED 10/08/2020 15:15:53 11/06/2020 16:25:48


S.L.U

CR DE SANLUCARKM. 7


CADIZ


SERVICES












11/08/2020 08:19:53 NO POST-TREATMENT, NO

ALKALINE ETCHINGAND TESTSPECIMEN

MANUFACTURINGONLY

03/12/2015 00:00:00


S.L.U

CR DE SANLUCARKM. 7


CADIZ


SERVICES



passivation





09/01/2020 12:23:17 IMMERSIONPROCESS FOR2000 AND 7000

SERIES, ALODINE1200S, TESTSPECIMEN

MANUFACTURINGONLY

03/12/2015 00:00:00


S.L.U

CR DE SANLUCARKM. 7


CADIZ


SERVICES







10/01/2020 09:29:52 TEST SPECIMENMANUFACTURING

ONLY

03/12/2015 00:00:00


S.L.U

CR DE SANLUCARKM. 7


CADIZ


SERVICES



anodising process



surface resistance)



surface resistance)


12/02/2020 15:51:13 Limited to Galvotest 19/12/2019 08:45:32


S.L.U

CR DE SANLUCARKM. 7


CADIZ


SERVICES







09/01/2020 12:32:25 MANUFACTURINGTEST SPECIMENS

ONLY

02/05/2016 15:28:11


S.L.U

CR DE SANLUCARKM. 7


CADIZ


SERVICES



materials







3 Yes QUALIFIED 08/01/2020 09:09:04 03/12/2015 00:00:00


S.L.U

CR DE SANLUCARKM. 7


CADIZ


SERVICES








17/04/2019 11:35:11 QCS131123 TAPECARBON and

QCS141151 FABRICCARBON

QCS131123;QCS141151

Titania - Technicalqualification - AITM6-

4005;Titania -Technical

qualification - AITM6-4005

Carbon / Tape / 2mmto 10mm;Carbonfabric / Laminate /

2mm to 10mm

31/07/2014 00:00:00


S.L.U

CR DE SANLUCARKM. 7


CADIZ


SERVICES

TBD TBD Application ofcorrosion preventionprimers for bonding

I+D-P-157 Application ofcorrosion preventionprimers for bonding

A2 I+D-P-157 Application ofcorrosion preventionprimers for bonding


10/08/2020 16:22:18 Limitation tospecimen

manufacturing only

07/02/2020 09:31:53



02 Nov 2020 10:51

45/81




ess scope


278608 WALLWORK HEATTREATMENT

LIMITED

LORD STREET BURY BL9 0RE United Kingdom HEAT TREATMENTSPECIALISTS



alloys




28/11/2019 15:45:57 See List ref SDF1-163A latest issue

16/10/2014 00:00:00

278608 WALLWORK HEATTREATMENT

LIMITED

LORD STREET BURY BL9 0RE United Kingdom HEAT TREATMENTSPECIALISTS






09/01/2020 09:58:38 See list ref SDF1-163A latest issue

04/11/2019 14:55:13

284481 JV COATING 9 RUE BERNARDPALISSY

MERIGNAC 33700 France SURFACETREATMENTSPECIALISTS



aluminium alloys


aluminium alloys






aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 14/11/2019 10:51:45 20/03/2012 00:00:00













A3 Yes QUALIFIED 14/11/2019 10:51:45 08/04/2016 10:23:38






expansion






passivation









passivation





14/11/2019 10:51:44 AIPI 02-05-001TYPE 1 IMMERSION

PROCESS

08/01/2013 00:00:00





passivation






11/04/2013 00:00:00







METALL


14/11/2019 10:51:44 + IPDA64-08 ONMETALLIC PARTS

28/10/2014 00:00:00






systems


systems


systems



10/06/2014 00:00:00









14/11/2019 10:51:43 METALLIC PARTS 28/07/2014 00:00:00







3 Yes QUALIFIED 27/03/2020 14:14:24 30/04/2015 00:00:00







C NA Yes QUALIFIED WITHLIMITATIONS

14/11/2019 10:51:44 INTEGRALETCHING ONLY NO

POCKETTING

13/04/2015 00:00:00









14/11/2019 10:51:44 INTEGRALETCHING ONLY NO

POCKETTING

13/04/2015 00:00:00




09-04 Masking Surface preparationprior to external paint

application

AIPS09-04-001 Surface preparationprior to external paint

application

2 AIPI09-04-001 Surface preparationprior to external paint

application


14/11/2019 10:51:43 METALLIC PARTS 20/12/2013 00:00:00






12 Yes QUALIFIED 14/11/2019 10:51:43 10/07/2014 00:00:00





E I+D-E-137 Penetrant inspectionprocess

E Yes QUALIFIED WITHLIMITATIONS

14/11/2019 10:51:43 penetrant Type1A2a/d and 1A3a/d.

14/03/2017 16:38:08

284644 AEROSPHERE INC 21 CHEMIN DELAVIATION

POINT CLAIRE H9R 4Z2 Canada SURFACETREATMENTSPECIALISTS




expansion


of metal parts





9 Yes QUALIFIED 14/11/2019 10:52:35 14/12/2009 00:00:00

284644 AEROSPHERE INC 21 CHEMIN DELAVIATION

POINT CLAIRE H9R 4Z2 Canada SURFACETREATMENTSPECIALISTS

TBD TBD SURFACEIMPROVEMENTUSING ROTARYFLAP PEENING

ABP1-2030 SURFACEIMPROVEMENTUSING ROTARYFLAP PEENING

2 ABP1-2030 SURFACEIMPROVEMENTUSING ROTARYFLAP PEENING

2 Yes QUALIFIED 14/11/2019 10:52:35 14/12/2009 00:00:00

285481 MARLIER SA LES PLAINESROUTE DE BILLOM

PERIGNAT SURALLIER






4 Yes QUALIFIED 13/09/2018 13:22:31 05/11/2015 00:00:00


PERIGNAT SURALLIER





13/09/2018 13:22:31 # Penetrant TypeI.A.2a/d and Type

I.D.3.a/d# pre-penetrant

etching operationperformed externally.

05/11/2015 00:00:00


PERIGNAT SURALLIER











Powder Bed Fusion

FR FR 05/11/2015 00:00:00

285573 ANODITECHAMBURG GMBH

CO KG

BOSCHSTR. 4 HAMBURG 22761 Germany SURFACETREATMENTSPECIALISTS



aluminium alloys


Sealing


Sealing





01/11/2010 00:00:00


CO KG




aluminium alloys







01/11/2010 00:00:00


CO KG




aluminium alloys


Sealing


Sealing





01/11/2010 00:00:00


CO KG










3 Yes QUALIFIED 14/11/2019 10:53:17 03/07/2019 11:31:29

285821 AEROTECH RUE JABEUR IBNHAYER

LA MARSA 2046 Tunisia SURFACETREATMENTSPECIALISTS



passivation





03/09/2019 14:19:45 METHOD BYIMMERSION ONLY

24/11/2015 00:00:00





passivation


Steel


Steel


Steel


27/06/2019 11:44:59 PARTS MACHINEDON ALL SURFACES

WITHOUTPICKLING;

MARTENSITIC ANDAUSTENITIC STEELWITH RM<1100MPA

05/09/2014 00:00:00








A3 Yes QUALIFIED 07/10/2019 13:28:24 14/04/2016 13:13:26








parts


parts

2 Yes QUALIFIED 03/09/2019 14:29:39 14/04/2017 15:44:57

286114 VIJAYA METALFINISHERS

PEENYAINDUSTRIAL AREA

BANGALORE 560058 India SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 22/02/2019 12:08:28 22/02/2019 11:32:17



02 Nov 2020 10:51

46/81




ess scope










20/04/2020 09:38:28 PROCESSING TOABP1-1022 USING

PARAMETERSAPPROVED BY RFA

3385.

03/01/2013 00:00:00















29/03/2019 10:20:54 NCF-0127NCF-0499

27/02/2019 13:53:22






passivation




NA Yes QUALIFIED WITHLIMITATIONS

on metallic parts only 27/01/2017 14:32:43






passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







base d'époxy)


30/01/2017 10:34:23 on metallic parts. 17/10/2016 10:49:20








OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00








General


27/01/2017 14:38:08 limitation to metallicparts.

17/10/2016 10:43:01












4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems


NO_AIRBUS_PI Yes QUALIFIED 30/01/2017 10:38:22 17/10/2016 10:46:42







systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems







18 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems


RESISTANT PAINT


RESISTANT PAINT

8 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems







8 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00










27/01/2017 14:39:35 on metallic parts 17/10/2016 10:52:09









TRANSPORTATION



TRANSPORTATION

2-1 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00











16 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 30/01/2017 10:53:26 17/10/2016 10:32:52












3 Yes QUALIFIED 30/01/2017 10:55:34 17/10/2016 10:35:42






materials



5 NA Yes QUALIFIED 27/10/2016 14:51:45 TW0608 TW0608 14/09/2011 00:00:00








Detection

3-2 NA Yes QUALIFIED 27/10/2016 14:51:45 TW0607 TW0607 14/09/2011 00:00:00















DETECTION









286347 LGAITECHNOLOGICAL

CENTER SAAPPLUS

RD DE LA FONTDEL CAME SN

BELLATERRA 8193 Spain NDT SPECIALISTSAFM-003-4 TESTLAB AFM-003-6

STRUCTURE TESTLAB GP-2-215

TEST JIGSEQUIPMENT








13/09/2018 13:20:21 QCS130657 15/10/2015 00:00:00

286856 MANUFACTURINGPROCESS

SPECIFICATIONSRL

VIA ORSO MARIOCORBINO 35

BRINDISI 72100 Italy SURFACETREATMENTSPECIALISTS



aluminium alloys



Yes QUALIFIED 12/04/2019 13:34:45 02/04/2014 00:00:00


SPECIFICATIONSRL





aluminium alloys


aluminium alloys

2 NA Yes QUALIFIED 27/10/2016 15:02:03 19/05/2014 00:00:00


SPECIFICATIONSRL





aluminium alloys



H NA Yes QUALIFIED 27/10/2016 15:02:03 18/12/2013 00:00:00


SPECIFICATIONSRL














27/10/2016 15:02:03 PARTS TO BESUBSQUENTLY

PAINTED

17/07/2015 00:00:00



02 Nov 2020 10:51

47/81




ess scope



SPECIFICATIONSRL






expansion


of metal parts


of metal parts


of metal parts


27/03/2020 15:21:20 ALUMINIUM PARTSONLY

26/05/2015 00:00:00


SPECIFICATIONSRL






base d'époxy)


base d'époxy)

Yes QUALIFIED 23/10/2019 11:34:19 02/04/2014 00:00:00


SPECIFICATIONSRL






J NA Yes QUALIFIED 23/10/2019 11:32:42 17/07/2015 00:00:00


SPECIFICATIONSRL










Yes QUALIFIED 23/10/2019 11:31:24 12/05/2015 00:00:00


SPECIFICATIONSRL









23/10/2019 11:26:40 METALLIC PARTS 17/07/2015 00:00:00


SPECIFICATIONSRL





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 12/04/2019 13:31:41 17/07/2015 00:00:00


SPECIFICATIONSRL






12 Yes QUALIFIED 27/10/2016 15:02:04 18/12/2013 00:00:00

287224 CHROME PLUSINC.


KANSAS 67217 USA SURFACETREATMENTSPECIALISTS




Titanium Alloys


Titanium Alloys


17/05/2019 17:14:17 Bath L6-30 11/11/2016 17:38:52






aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






aluminium alloys


aluminium alloys


ALUMINIUM

12 Yes QUALIFIED 18/04/2019 14:20:01 14/12/2009 00:00:00






aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 27/10/2016 15:04:54 02/11/2015 00:00:00









Aluminum Alloys


Aluminum Alloys

Yes QUALIFIED 17/07/2017 15:12:29 17/07/2017 15:03:03














A3 Yes QUALIFIED 15/02/2017 14:46:01 28/02/2011 00:00:00







expansion





4 Yes QUALIFIED 19/07/2019 16:22:01 14/12/2009 00:00:00







expansion








expansion


of metal parts





9 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00







expansion


of metal parts


of metal parts


of metal parts

A3 Yes QUALIFIED 30/01/2017 11:30:12 02/05/2016 17:37:52









4-1 Yes QUALIFIED 19/07/2019 16:13:14 14/12/2009 00:00:00






passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00






passivation




2 Yes QUALIFIED 27/10/2016 15:04:54 09/06/2014 00:00:00






alloys



8 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00







base d'époxy)


base d'époxy)

Yes QUALIFIED 27/10/2016 15:04:53 12/06/2015 00:00:00








OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00








General


General

Yes QUALIFIED 27/10/2016 15:04:53 19/02/2015 00:00:00












4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







surfaces


surfaces

2 AIPI05-02-017 Application ofcorrosion inhibitingcoating on externalunpainted erosionprone aluminium

surfaces

A0 Yes QUALIFIED 19/07/2019 16:17:35 09/06/2014 00:00:00







systems











11 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems







8 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







systems


systems


systems

A2 Yes QUALIFIED 03/07/2018 16:08:58











Yes QUALIFIED 27/10/2016 15:04:53 12/06/2015 00:00:00



02 Nov 2020 10:51

48/81




ess scope












Yes QUALIFIED 27/10/2016 15:04:53 12/06/2015 00:00:00











16 Yes QUALIFIED 24/03/2010 00:00:00 14/12/2009 00:00:00









A3 Yes QUALIFIED 27/10/2016 15:04:54 09/06/2014 00:00:00









parts


parts

2 Yes QUALIFIED 27/10/2016 15:04:55 17/10/2011 00:00:00








PAINTBLAST )


PAINTBLAST )


27/10/2016 15:04:53 LIMITED TO ABP 4-4139 METHOD 4 IN

ACCORDANCEWITH AIPS 05-03-

001

02/12/2013 00:00:00





19/07/2019 16:25:36 Only for applicationand removal of

masking to protectelectrical bonding

points from surfacetreatment/paint

01/12/2017 14:13:10







Acid -


Acid -

Yes QUALIFIED 19/07/2019 16:36:56 11/11/2016 17:41:30








4 Yes QUALIFIED 19/07/2019 16:34:53 14/12/2009 00:00:00








3 Yes QUALIFIED 19/07/2019 16:33:06 09/06/2014 00:00:00






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 19/07/2019 16:03:12 24/06/2015 00:00:00












3 Yes QUALIFIED 19/07/2019 16:29:58 02/11/2015 00:00:00






materials







5 Yes QUALIFIED 19/07/2019 16:40:55 05/02/2016 17:18:07








Detection


Detection

3-2 Yes QUALIFIED 27/10/2016 15:04:54 17/09/2014 00:00:00









4 Yes QUALIFIED 27/10/2016 15:04:55 17/09/2014 00:00:00






DETECTION








12 Yes QUALIFIED 27/10/2016 15:04:55 AITM AITM 28/02/2011 00:00:00





287399 GEB SURFACETREATMENTS LTD

WHALF ROADINDUSTRIAL

ESTATE

PINXTON NG16 6LE United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 14/11/2019 10:54:22 24/03/2010 00:00:00



ESTATE













14/11/2019 10:54:22 RESTRICTED TOPARTS FULLY

PAINTED ONLY(WITHOUT POST

TREATMENT)

25/07/2016 16:15:52



ESTATE





expansion





4 Yes QUALIFIED 27/04/2020 08:36:26 24/03/2010 00:00:00



ESTATE




passivation




6 Yes QUALIFIED 14/11/2019 10:54:22 24/03/2010 00:00:00



ESTATE




passivation




2 Yes QUALIFIED 14/11/2019 10:54:22 02/05/2018 11:21:15



ESTATE






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 14/11/2019 10:54:23 24/03/2010 00:00:00



ESTATE





systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 14/11/2019 10:54:24 24/03/2010 00:00:00



ESTATE





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 14/11/2019 10:54:23 24/03/2010 00:00:00



ESTATE





systems







18 Yes QUALIFIED 14/11/2019 10:54:23 24/03/2010 00:00:00



ESTATE





systems











11 Yes QUALIFIED 14/11/2019 10:54:25 24/03/2010 00:00:00



ESTATE





systems


RESISTANT PAINT


RESISTANT PAINT

8 Yes QUALIFIED 14/11/2019 10:54:23 24/03/2010 00:00:00



ESTATE





systems


systems


systems


14/11/2019 10:54:23 LIMITED TOMETALLIC

DETAILED PARTSAND ABRASION

RESISTANT PAINTAPPLICATION

02/05/2018 11:16:53



ESTATE









16 Yes QUALIFIED 14/11/2019 10:54:24 24/03/2010 00:00:00



02 Nov 2020 10:51

49/81




ess scope




ESTATE









02/05/2018 11:09:38



ESTATE




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 27/04/2020 08:39:26 LEGACY LEGACY 24/08/2016 17:09:55



ESTATE




materials



5 ABP6-5224 TESTING OFALUMINIUMALLOYS BY


4 Yes QUALIFIED 14/11/2019 10:54:24 02/01/2018 12:55:12



ESTATE




materials







5 Yes QUALIFIED 14/11/2019 10:54:23 02/01/2018 13:03:11



ESTATE




DETECTION




ESTATE





12 Yes QUALIFIED 14/11/2019 10:54:24 19/02/2014 00:00:00

288857 GALVATEC SL CL JUAN OLIVERT22 - P.E.

AEROPOLIS

LA RINCONADA 41309 Spain SURFACETREATMENTSPECIALISTS




fasteners


fasteners


fasteners

A3 Yes QUALIFIED 15/03/2019 15:27:01 25/03/2015 00:00:00


AEROPOLIS





press fit


press fit


press fit

2 Yes QUALIFIED 28/10/2019 17:55:02 25/03/2015 00:00:00


AEROPOLIS





for fastening


for Fastening


for Fastening


15/03/2019 15:25:38 ONLY FORDRILLING OF AL, TIAND STEEL PARTS

UP TO 4MMTHICKNESS WITH

NO STACK.

21/12/2012 00:00:00


AEROPOLIS



01-03 Inserts,Locking

Installation of helicalthreaded inserts

AIPS01-03-004 Installation of HelicoilThreaded Inserts

4 AIPI01-03-004 Installation of HelicoilThreaded Inserts

A2 Yes QUALIFIED 24/09/2019 11:52:53 25/03/2015 00:00:00


AEROPOLIS





alloys


alloys

2 Yes QUALIFIED 15/03/2019 15:27:01 15/07/2011 00:00:00


AEROPOLIS












A3 Yes QUALIFIED 15/03/2019 15:27:01 18/12/2011 00:00:00


AEROPOLIS









3 I+D-P-416 TARTARIC-SULPHURIC

ANODISING OFALUMINIUM AND

ITS ALLOYS

B1 Yes QUALIFIED 15/03/2019 15:27:01 22/05/2015 00:00:00


AEROPOLIS





expansion



AEROPOLIS




agents



5 I+D-P-115 Electrolytic cadmiumplating

C2 Yes QUALIFIED 15/03/2019 15:27:04 08/10/2012 00:00:00


AEROPOLIS




agents


I+D-P-115 Electrolytic cadmiumplating

C2 I+D-P-115 Electrolytic cadmiumplating

C2 Yes QUALIFIED 15/03/2019 15:27:04 22/11/2012 00:00:00


AEROPOLIS




agents





AEROPOLIS




agents




15/03/2019 15:25:39 TANK GFI13/01,GFI13/03, GFI13/05,GFI13/10 and GFI-13/06 WITH PLANE

GROUNDINGPERFORMED IN-

SITU.

23/03/2015 00:00:00


AEROPOLIS




agents


I+D-P-110 Hard chromiumplating

B3 I+D-P-110 Hard chromiumplating

B3 Yes QUALIFIED 15/03/2019 15:27:03 13/12/2012 00:00:00


AEROPOLIS




passivation





15/03/2019 15:25:39 TYPE I: COLORED;PRETREATMENTACCORDING TO

METHOD 2

15/07/2011 00:00:00


AEROPOLIS




passivation



3 I+D-P-202 Chemical conversionfilms on aluminium

and its alloys

C Yes QUALIFIED WITHLIMITATIONS

15/03/2019 15:25:39 ONLY FOR TYPE 1COLORED

02/03/2009 00:00:00


AEROPOLIS




passivation


Steel


Steel


Steel

2 Yes QUALIFIED 15/03/2019 15:27:04 08/10/2015 00:00:00


AEROPOLIS




passivation


Steel


Steel

2 I+D-P-038 Cleaning andpassivation of

stainless steels andrefractory nickel and

cobalt alloys

E7 Yes QUALIFIED 15/03/2019 15:27:04 04/03/2014 00:00:00


AEROPOLIS




passivation




15/03/2019 15:25:40 AIPS02-05-004SCOPE &

LIMITATIONS(REMARKS) INACCORDANCE


16/07/2013 00:00:00


AEROPOLIS




passivation

Phosphating of steel AIPS02-05-004 Phosphating of Steel 2 I+D-P-095 Steel phosphatizing B2 Yes QUALIFIED WITHLIMITATIONS

15/03/2019 15:25:39 ONLY TYPE M 10/12/2012 00:00:00


AEROPOLIS




passivation

Phosphating of steel AIPS02-05-004 Phosphating of Steel 2 NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

15/03/2019 15:25:39 TYPE M AND Z 31/07/2013 00:00:00


AEROPOLIS





anaerobic compound


anaerobic compound


anaerobic compound

A1 Yes QUALIFIED 15/03/2019 15:27:03 11/06/2012 00:00:00


AEROPOLIS










A2 Yes QUALIFIED 28/10/2019 18:01:09 10/10/2011 00:00:00


AEROPOLIS







15/03/2019 15:25:39 Limitaions for stressrelief only.

20/07/2017 12:59:16


AEROPOLIS





ALLOY STEELS


ALLOY STEELS


15/03/2019 15:25:38 Qualified for stressrelief only.

20/07/2017 12:47:33


AEROPOLIS





REFRACTORYSTEELS


REFRACTORYSTEELS


15/03/2019 15:25:39 Limitations for stressrelief only

20/07/2017 12:53:21


AEROPOLIS







A3 Yes QUALIFIED 15/03/2019 15:25:37 10/10/2011 00:00:00



02 Nov 2020 10:51

50/81




ess scope



AEROPOLIS






5 I+D-P-060 Paint (Generalspecification)

C7 Yes QUALIFIED 15/03/2019 15:25:37 08/10/2012 00:00:00


AEROPOLIS






5 I+D-P-064 Paint systems formetallic detail parts

and assemblies

C Yes QUALIFIED 15/03/2019 15:25:37 08/10/2012 00:00:00


AEROPOLIS







parts


parts

2 Yes QUALIFIED 15/03/2019 15:25:36 25/03/2015 00:00:00


AEROPOLIS






A5 Yes QUALIFIED 15/03/2019 15:27:06 10/10/2011 00:00:00


AEROPOLIS





8 I+D-P-146 Application ofsealants

F3 Yes QUALIFIED 15/03/2019 15:27:06 04/03/2014 00:00:00


AEROPOLIS










15/03/2019 15:25:40 Raw material format:Touch

18/06/2018 07:24:02


AEROPOLIS






A4 Yes QUALIFIED 15/03/2019 15:25:38 08/10/2015 00:00:00


AEROPOLIS






F3 Yes QUALIFIED 15/03/2019 15:25:38 04/03/2014 00:00:00


AEROPOLIS


06 Bonding 06-01 Pre-treatment Mechanical surfacepreparation of non-structural adherend


AIPS06-01-004 Mechanical surfacepreparation of non-structural adherend


2 AIPI06-01-004 Mechanical surfacepreparation of non-structural adherend


A2 Yes QUALIFIED 15/03/2019 15:25:38 11/12/2018 18:07:30


AEROPOLIS


06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.

AIPS06-02-002 Non-structuraladhesive bonding

4 AIPI06-02-002 Non-structuraladhesive bonding


15/03/2019 15:25:41 Only for use ofAIMS04-05-014c

according todrawings

11/12/2018 18:21:00


AEROPOLIS



24/10/2019 17:51:36 ONLY FORBONDING OF

METALLIC PARTSIN NON-

REMOVABLEASSEMBLIES

(LASER METHODEXCLUDED).

23/10/2012 00:00:00


AEROPOLIS






3 Yes QUALIFIED 15/03/2019 15:25:38 18/06/2018 07:34:57


AEROPOLIS




anodising process



surface resistance)



surface resistance)



AEROPOLIS












AEROPOLIS




materials









AEROPOLIS




materials

I+D-E-140 Aluminium alloytemper condition

inspection by electricconductivity and

hardness

H NA Yes QUALIFIED 15/03/2019 15:25:37 22/05/2015 00:00:00


AEROPOLIS




ETCH INSPECTION


inspection


inspection


04/07/2019 16:50:22 HARD CHROMIUMTEST SAMPLE

NONE NONE 09/01/2013 00:00:00


AEROPOLIS







4 Yes QUALIFIED 15/03/2019 15:27:04 17/12/2012 00:00:00


AEROPOLIS



Measurement Measure ResistanceOf Electrical Bonding

Points

AITM6-9008 MétallisationÉlectrique :Mesure

de la Résistance desPoints de

MétallisationÉlectrique

4 AITM6-9008 MétallisationÉlectrique :Mesure




24/09/2019 11:58:09 ONLYMEASUREMENT BY

"4 POINTS"METHOD ALLOWED

(TYPES M1 & M2)

17/12/2012 00:00:00


AEROPOLIS






15/03/2019 15:25:40 # LINEA GFI-09WITH 970P23 (S2)AND 970P25 (S3)# LINEA GFI-18

WITH ZYGLO 60C(S2)

19/04/2013 00:00:00


AEROPOLIS





15/03/2019 15:25:40 # LINEA GFI-09WITH 970P23 (S2)AND 970P25 (S3)# LINEA GFI-18

WITH ZYGLO 60C(S2)

16/07/2013 00:00:00

289104 PROTECINDUSTRIE

208-210 RUEMICHEM CARRE

BEZONS 95870 France SURFACETREATMENTSPECIALISTS



aluminium alloys



N NO_AIRBUS_PI Yes QUALIFIED 14/11/2019 10:55:29 28/02/1995 00:00:00






aluminium alloys


aluminium alloys







aluminium alloys


















14/11/2019 10:55:29 TSA WITHOUTPOST-TREATMENT

23/10/2012 00:00:00






agents




14/11/2019 10:55:30 LIMITED FOR BATHWITHOUT

BRIGHTNESSAGENT

31/03/2014 00:00:00






passivation










passivation









passivation


Steel


Steel


Steel


14/11/2019 10:55:30 LINE GLVT1001, ONAUSTENITIC STEEL

WITH RM <1100MPA

28/03/2014 00:00:00
















A3 Yes QUALIFIED 14/11/2019 10:55:31 23/10/2012 00:00:00









4 Yes QUALIFIED 14/11/2019 10:55:31 31/03/2014 00:00:00



02 Nov 2020 10:51

51/81




ess scope









MAGNETOSCOPIE








12 Yes QUALIFIED 14/11/2019 10:55:31 02/10/2014 00:00:00





alloys




289461 HARMON METALTREATMENTS LTD

55 HAVILAND ROAD WIMBORNE BH21 7PY United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 14/11/2019 10:56:56 14/12/2009 00:00:00





aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 14/11/2019 10:56:56 14/12/2009 00:00:00






expansion





4 Yes QUALIFIED 20/03/2020 09:42:36 14/12/2009 00:00:00






expansion


of metal parts





9 Yes QUALIFIED 14/11/2019 10:56:58 14/12/2009 00:00:00





agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 14/11/2019 10:56:57 14/12/2009 00:00:00





passivation




6 Yes QUALIFIED 14/11/2019 10:56:57 14/12/2009 00:00:00





passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 14/11/2019 10:56:57 14/12/2009 00:00:00







OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 14/11/2019 10:56:57 14/12/2009 00:00:00






systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 14/11/2019 10:56:57 14/12/2009 00:00:00






systems







18 Yes QUALIFIED 14/11/2019 10:56:57 14/12/2009 00:00:00






systems











11 Yes QUALIFIED 14/11/2019 10:56:55 14/12/2009 00:00:00










16 Yes QUALIFIED 14/11/2019 10:56:56 14/12/2009 00:00:00





ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION


20/03/2020 09:42:35 None UK UK 14/12/2009 00:00:00







Detection






DETECTION


291650 AEROSPACEPROCESSINGINDIA PVT LTD

437A HATTERGIVILLAGE

BELGAUM 591245 India SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00






aluminium alloys


ALUMINIUM


ALUMINIUM


16/10/2018 16:58:14 Only Method 3 16/10/2018 16:16:04















27/10/2016 15:22:12 FOR PAINTEDPARTS ONLY

15/12/2014 00:00:00







expansion



Yes QUALIFIED 27/10/2016 15:22:10 26/05/2016 11:17:40







expansion





4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00







expansion








expansion


of metal parts






19/12/2019 11:06:48 LIMITED TOALUMINIUM

ALLOYS

18/02/2010 00:00:00






agents






3 Yes QUALIFIED 27/10/2016 15:22:11 04/02/2016 09:30:55






agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 11/03/2019 09:00:21 11/03/2019 08:58:38






passivation





16/10/2018 17:08:32 Only brushingapplication.

16/10/2018 16:16:05






passivation






Yes QUALIFIED 27/10/2016 15:22:10 06/02/2015 00:00:00






passivation




6 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00



02 Nov 2020 10:51

52/81




ess scope







passivation





22/10/2019 12:25:50 Only immersion andbrushing application.

29/05/2018 15:05:55






passivation


Steel


Steel


Steel

2 Yes QUALIFIED 11/10/2019 16:13:53 25/05/2011 00:00:00






passivation




NICKEL ALLOYS


NICKEL ALLOYS

4 Yes QUALIFIED 27/10/2016 15:22:11 04/02/2016 09:28:50










3-1 Yes QUALIFIED 22/10/2019 12:16:25 19/05/2016 11:47:54








OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 27/10/2016 15:22:11 04/11/2015 00:00:00








PAINTS



PAINTS

12 Yes QUALIFIED 27/10/2016 15:22:11 30/08/2012 00:00:00








General


General

Yes QUALIFIED 27/10/2016 15:22:10 11/03/2015 00:00:00







systems



Yes QUALIFIED 27/10/2016 15:22:10 19/05/2016 11:41:14







systems


RESISTANT PAINT


RESISTANT PAINT


16/09/2020 14:16:56 Method 3 only 11/03/2019 08:30:23







systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 16/09/2020 14:17:47 11/03/2019 08:35:45







systems








21/03/2019 16:14:50 Method 6 only 21/03/2019 16:11:54







systems








11/03/2019 08:43:21 Method 2 only 11/03/2019 08:41:08







systems


systems


systems


20/10/2020 09:35:32 Limited to the overcoating of Part

Markings and theapplication of

Abrasion ResistantPaint.

10/03/2016 09:39:30











Yes QUALIFIED 27/10/2016 15:22:10 11/03/2015 00:00:00











Yes QUALIFIED 27/10/2016 15:22:10 11/03/2015 00:00:00











16 Yes QUALIFIED 27/10/2016 15:22:11 04/11/2015 00:00:00










27/10/2016 15:22:12 RESTRICTED TOMETALLIC PARTS

15/12/2014 00:00:00









parts


parts


16/10/2018 16:42:13 Only for aluminumparts.

16/10/2018 16:11:25










Yes QUALIFIED 27/10/2016 15:22:10 19/05/2016 11:44:00




07 Electrical 07-01 Assembly Electrical bonding 80-T-40-3312 Métallisation 80-T-40-3312 Métallisation Yes QUALIFIED WITHLIMITATIONS

22/10/2019 12:26:53 SURFACEPREPARATION

ONLY (UNMASKING+ CLEANING +

PROTECTION WITHOIL)

10/11/2014 00:00:00





11/10/2019 16:06:40 Limited to SurfacePreparation and

TemporaryProtection only.

19/05/2016 11:37:25










2 Yes QUALIFIED 11/03/2019 08:48:53 11/03/2019 08:47:07








4 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00








3 Yes QUALIFIED 16/10/2018 16:26:03 16/10/2018 16:11:24






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 18/03/2019 08:50:41 11/03/2019 09:02:38












3 Yes QUALIFIED 12/04/2019 13:38:09 03/10/2014 00:00:00






materials









materials







5 Yes QUALIFIED 11/10/2019 16:22:52 06/02/2015 00:00:00






ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION

5-1 Yes QUALIFIED 15/03/2019 15:33:39 10/02/2016 16:23:00






ETCH INSPECTION


inspection


inspection

2 Yes QUALIFIED 15/03/2019 15:33:39 10/02/2016 16:32:08



02 Nov 2020 10:51

53/81




ess scope









Detection















DETECTION









25/01/2019 17:21:35 METHODS line 1 &2: Type I, method A,

sensibility 2 orsensibility 3, fom a or

d Type I,

method D, sensibility3, fom a or d

NA NA 05/01/2011 00:00:00





BEADS


BEADS


BEADS

5 Yes QUALIFIED 24/03/2010 00:00:00 18/02/2010 00:00:00

291993 TECHNIPROTECMETAL

GP1 ROUTE DESOUSSE MSAKEN

SOUSSE 4013 Tunisia SURFACETREATMENTSPECIALISTS



aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 14/11/2019 10:59:13 08/04/2016 16:02:02














A3 Yes QUALIFIED 14/11/2019 10:59:13 12/03/2012 00:00:00






passivation




E NA Yes QUALIFIED 24/09/2020 11:47:04 03/11/2016 08:31:06






passivation






20/03/2012 00:00:00






passivation


Steel


Steel


Steel


14/11/2019 10:59:14 AUSTENITICSTEELS ONLY

28/03/2012 00:00:00








METALL

A5 Yes QUALIFIED 06/11/2018 10:27:31 16/01/2015 00:00:00







systems


systems


systems


INK PROTECTIONWITH VARNISH

ONLY

10/08/2017 15:54:39











20/03/2012 00:00:00









parts


parts


14/11/2019 10:59:13 ON ALUMINIUMALLOYS

08/04/2016 15:55:34




07 Electrical 07-01 Assembly Electrical bonding ADET0114 Procedes demetallisation

C NA Yes QUALIFIED WITHLIMITATIONS

24/09/2020 11:47:40 Preparation andapplication of blue

varnish

23/10/2017 15:44:54




07 Electrical 07-01 Assembly Electrical bonding AIPS07-01-006 Electrical Bonding 9 AIPI07-01-006 Electrical Bonding B1 Yes QUALIFIED 24/09/2020 11:37:16 03/11/2016 08:27:03








292929 AEROSPACEMETAL FINISHERS

LTD

11 PARADISEAVENUE, UNIT 3

BALLYMENA BT42 3AE United Kingdom SURFACETREATMENTSPECIALISTS




alloys


alloys

2 Yes QUALIFIED 14/11/2019 11:00:41 21/06/2018 11:36:49


LTD





aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 14/11/2019 11:00:41 02/02/2012 00:00:00


LTD








Aluminum Alloys


Aluminum Alloys

Yes QUALIFIED 14/11/2019 11:00:40 12/05/2015 00:00:00


LTD













A3 Yes QUALIFIED 14/11/2019 11:00:40 05/03/2014 00:00:00


LTD






expansion





4 Yes QUALIFIED 14/11/2019 11:00:42 07/02/2019 11:12:42


LTD






expansion


14/11/2019 11:00:43 PARTS NO LARGERTHAN 1 METER

28/01/2019 09:37:58


LTD





passivation




6 Yes QUALIFIED 14/11/2019 11:00:42 02/02/2012 00:00:00


LTD





passivation





02/03/2020 10:25:07 Only immersionmethod and localapplication withAlodine 1200

600.00 2100.00 1200.00 30/07/2018 11:35:12


LTD







OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 14/11/2019 11:00:41 02/02/2012 00:00:00


LTD







PAINTS



PAINTS


14/11/2019 11:00:41 limited to Methods 2,6 & 10 only.

145.00 270.00 135.00 07/11/2018 17:22:14


LTD







General


General

Yes QUALIFIED 14/11/2019 11:00:41 30/07/2018 13:27:41


LTD










5 Yes QUALIFIED 14/11/2019 11:00:42 07/11/2018 16:57:31


LTD






systems


Abrasion-Resistant


Abrasion-Resistant

Yes QUALIFIED 14/11/2019 11:00:43 30/07/2018 14:06:40


LTD






systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 14/11/2019 11:00:42 350.00 123.00 80.00 07/11/2018 17:10:26


LTD






systems











11 Yes QUALIFIED 14/11/2019 11:00:44 25/01/2019 09:04:36



02 Nov 2020 10:51

54/81




ess scope



LTD






systems







8 Yes QUALIFIED 14/11/2019 11:00:43 07/11/2018 17:40:41


LTD






systems


systems


systems

A2 Yes QUALIFIED 14/11/2019 11:00:42 01/04/2014 00:00:00


LTD










Yes QUALIFIED 14/11/2019 11:00:44 30/07/2018 14:11:15


LTD










Yes QUALIFIED 14/11/2019 11:00:44 30/07/2018 14:19:21


LTD










16 Yes QUALIFIED 14/11/2019 11:00:44 02/02/2012 00:00:00


LTD








A3 Yes QUALIFIED 14/11/2019 11:00:43 01/04/2014 00:00:00


LTD








parts


parts


02/03/2020 10:55:39 Aluminum andtitanium parts only

02/03/2020 10:54:36


LTD










A6 Yes QUALIFIED 14/11/2019 11:00:43 08/09/2016 13:14:50


LTD



07 Electrical 07-01 Assembly Electrical bonding ABP7-1246 METALLISATION ETMISE A LA MASSEREPONDANT AUX

EXIGENCESAIRBUS LORS DEL¿ASSEMBLAGE

9 ABP7-1246 METALLISATION ETMISE A LA MASSEREPONDANT AUX

EXIGENCESAIRBUS LORS DEL¿ASSEMBLAGE


14/11/2019 11:00:43 limited to section 5.4for anti-static paint

only.

400.00 10.00 10.00 07/11/2018 17:51:51


LTD







3 Yes QUALIFIED 14/11/2019 11:00:43 21/06/2018 11:39:44


LTD











3 Yes QUALIFIED 14/11/2019 11:00:45 07/11/2018 17:33:34


LTD





materials







5 Yes QUALIFIED 14/11/2019 11:00:45 26/03/2014 00:00:00


LTD





DETECTION



LTD






12 Yes QUALIFIED 14/11/2019 11:00:44 26/03/2014 00:00:00


LTD




ALLOYS


ALLOYS


ALLOYS

7 Yes QUALIFIED 14/11/2019 11:00:41 02/02/2012 00:00:00

293699 AEROMETALLICTARAZONA SAU

CL ANDALUCIA SN TARAZONA 50500 Spain SURFACETREATMENTSPECIALISTS




fasteners


fasteners

5 I+D-L-113 ALUMINIUM ALLOYAND NIOBIUM


RIVETS


18/03/2019 11:53:22 NO VALID TOTREAT RIVET

04/03/2013 00:00:00







AIPS01-02-013 Installation of BlindBolts and Blind








press fit


press fit


press fit

2 Yes QUALIFIED 26/03/2019 11:12:20 01/03/2019 15:11:23






fasteners

AIPS01-02-022 Installation of parallelshank threaded

fasteners

4 I+D-P-364 Inmstallation of Light,Short Thread, non -

Metric Fasteners"Hi.Lite/Verri-Lite"

A4 Yes QUALIFIED 18/03/2019 11:53:22 04/03/2013 00:00:00






for fastening


HOLES INMETALLIC

MATERIALS


HOLES INMETALLIC

MATERIALS

1 Yes QUALIFIED 25/09/2020 09:49:38 19/08/2020 15:35:30






for fastening


for Fastening


for Fastening

A1 Yes QUALIFIED 01/03/2019 15:04:18 01/03/2019 15:02:54





aluminium alloys





WORKBENCHONLY

26/09/2013 00:00:00





aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 29/07/2011 00:00:00 29/07/2011 00:00:00





aluminium alloys


aluminium alloys

2 I+D-P-213 Anodizing ofAluminium and

Aluminium Alloys


02/02/2012 00:00:00 VALID ONLY FORCHROMIC ACIDANODIZING 20 V

01/06/2003 00:00:00





aluminium alloys


aluminium alloys















20/03/2018 10:18:56 PARTS TO BESUBSQUENTLY

PAINTED

12/01/2015 00:00:00






expansion


of metal parts





9 Yes QUALIFIED 06/05/2011 00:00:00 05/05/2011 00:00:00






expansion


of metal parts


REQUIREMENTS


REQUIREMENTS

4 Yes QUALIFIED 06/05/2011 00:00:00 05/05/2011 00:00:00






expansion


of metal parts


of metal parts


of metal parts


06/11/2019 14:11:25 CLASSIC SHOTPEENINGPROCESS

16/12/2013 00:00:00






expansion


of metal parts


of metal parts

7 I+D-P-006 Shot peening F1 Yes QUALIFIED 02/02/2012 00:00:00 30/11/2009 00:00:00






expansion

Shot peening formingof metal parts

AIPS02-02-001 Shot peening formingof metal parts


27/04/2018 12:47:50 LIMITED FORBELUGA XL

02/02/2016 15:07:55



02 Nov 2020 10:51

55/81




ess scope






passivation








WORKBENCHONLY

20/03/2014 00:00:00





passivation




6 Yes QUALIFIED 06/05/2011 00:00:00 05/05/2011 00:00:00





passivation





16/07/2019 15:44:03 Product Alodine Pen1132 and local

application Alodine1200 S

01/08/2012 00:00:00





passivation



3 I+D-P-202 Chemical conversionfilms on aluminium

and its alloys


16/07/2019 15:53:49 ONLY TYPE I,APPLICATION WITHBRUSH IN REPAIRSOF DAMAGE ANDBONDING POINTS

PROTECTION.#Limitation: ProductAlodine Pen 1132

and local applicationAlodine 1200 S

01/03/2003 00:00:00






anaerobic compound


anaerobic compound


anaerobic compound


27/07/2020 15:01:56 Bushes Stainlesssteel + Cadnium

platedICY ref D19012047

01/03/2019 15:29:18




03-10 Straighteningof metals

Rectification ofmetallic materials by

3 points bending

AIPS03-10-003 Rectification ofmetallic materials by

3 point bending

3 AIPI03-10-003 Rectification ofmetallic materials by

3 point bending


11/06/2020 16:18:30 Aluminium parts only 13/05/2020 11:35:20







OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 06/05/2011 00:00:00 05/05/2011 00:00:00







PAINTS



PAINTS

12 Yes QUALIFIED 06/05/2011 00:00:00 05/05/2011 00:00:00











AIPS05-01-001 Application of basicprimer


C7 Yes QUALIFIED WITHLIMITATIONS

04/04/2014 00:00:00 only for metallic parts 04/04/2014 00:00:00







and assemblies



01/05/2004 00:00:00







General


General



WORKBENCHONLY

26/09/2013 00:00:00












WORKBENCHONLY

20/03/2014 00:00:00











24/03/2020 16:52:14 Only for ExtendedWorkbench

29/03/2016 13:42:06










16 Yes QUALIFIED 06/05/2011 00:00:00 05/05/2011 00:00:00









26/02/2020 11:40:25 Only metallicmaterials

01/08/2012 00:00:00








and assemblies









5 I+D-P-358 Painting of compositedetail parts










parts


parts


27/07/2020 15:04:18 #Limitation: ProductAlodine Pen 1132

and local applicationAlodine 1200 S

01/03/2019 15:19:03








27/07/2020 15:03:18 #Limitation:Application all parts

accepts Fueltightness assemblies

01/03/2019 15:22:42







F3 Yes QUALIFIED 18/03/2019 11:53:23 04/03/2013 00:00:00








3 I+D-P-186 Sealant protectionagainst projections of

hydraulic fluids

C2 Yes QUALIFIED 18/03/2019 11:53:21 04/03/2013 00:00:00







A4 Yes QUALIFIED 26/03/2019 11:18:21 01/03/2019 15:08:17







F3 Yes QUALIFIED 18/03/2019 11:53:21 04/03/2013 00:00:00




06/11/2019 14:46:53 PREPARATIONSP4&7,

PREPARATIONTP1&2

24/10/2014 00:00:00





anodising process



surface resistance)



surface resistance)












3 Yes QUALIFIED 06/11/2019 14:21:07 LIMITED TOEXTENDED

WORKBENCHONLY

NA NA 26/09/2013 00:00:00





materials







5 Yes QUALIFIED 06/11/2019 14:33:32 17/12/2015 00:00:00





materials

I+D-E-140 Aluminium alloytemper condition


hardness

H I+D-E-140 Aluminium alloytemper condition


hardness

G Yes QUALIFIED 06/11/2019 14:27:46 None NA NA 04/04/2014 00:00:00





DETECTION

13 NA Yes QUALIFIED 29/07/2011 00:00:00 NDT-B-229-10-AW NDT-B-229-10-AW 29/07/2011 00:00:00







24/09/2020 09:34:05 Penetrant Type I.A.2.form a/d

NA NA 24/02/2012 00:00:00






02/02/2012 00:00:00 APPLICABLE TYPE1, METHOD A

ES ES 01/05/2003 00:00:00



02 Nov 2020 10:51

56/81




ess scope





ALLOYS


ALLOYS


ALLOYS

7 Yes QUALIFIED 06/05/2011 00:00:00 05/05/2011 00:00:00

295367 SAECHSISCHELUFTFAHRT

SERVICE GMBHKAMENZ

ZUM TOWER 8 KAMENZ 1917 Germany SURFACETREATMENTSPECIALISTS



passivation





21/01/2020 16:01:22 Brushing withchromating pen

25/07/2019 15:43:27


SERVICE GMBHKAMENZ




passivation








16/01/2008 00:00:00


SERVICE GMBHKAMENZ




passivation





21/01/2020 15:59:29 Type I — localapplication Alodine

Pen 1132

25/07/2019 16:05:55


SERVICE GMBHKAMENZ





base d'époxy)


base d'époxy)



16/01/2008 00:00:00


SERVICE GMBHKAMENZ





Polyurethane Primer


Polyurethane Primer





16/01/2008 00:00:00


SERVICE GMBHKAMENZ






e



e



16/01/2008 00:00:00


SERVICE GMBHKAMENZ





Chromate - free


Chromate - free





16/01/2008 00:00:00


SERVICE GMBHKAMENZ





y Paint







16/01/2008 00:00:00


SERVICE GMBHKAMENZ






General


General



16/01/2008 00:00:00


SERVICE GMBHKAMENZ





Paint







16/01/2008 00:00:00


SERVICE GMBHKAMENZ





systems







16/01/2008 00:00:00


SERVICE GMBHKAMENZ





systems


Abrasion-Resistant


Abrasion-Resistant



16/01/2008 00:00:00


SERVICE GMBHKAMENZ













16/01/2008 00:00:00


SERVICE GMBHKAMENZ









09/05/2016 13:24:48


SERVICE GMBHKAMENZ











16/01/2008 00:00:00


SERVICE GMBHKAMENZ









09/05/2016 13:28:21


SERVICE GMBHKAMENZ









09/05/2016 13:32:02


SERVICE GMBHKAMENZ







parts


parts



12/05/2016 10:50:04


SERVICE GMBHKAMENZ










3 Yes QUALIFIED 21/01/2020 15:28:42 09/05/2016 13:34:58

295433 ACTION GMGGMBH

BETRIEBSTEILKOENIGSBRUECK

WEISSBACHERSTR. 63

KOENIGSBRUECK 1936 Germany SURFACETREATMENTSPECIALISTS



passivation






25/07/2019 16:18:32



WEISSBACHERSTR. 63




passivation










16/01/2008 00:00:00



WEISSBACHERSTR. 63




passivation





01/04/2020 15:30:39 Type I – localApplication Alodine

Pen 1132

25/07/2019 16:24:11



WEISSBACHERSTR. 63





base d'époxy)


base d'époxy)





16/01/2008 00:00:00



WEISSBACHERSTR. 63





Polyurethane Primer


Polyurethane Primer





16/01/2008 00:00:00



WEISSBACHERSTR. 63






e



e





16/01/2008 00:00:00



WEISSBACHERSTR. 63





Chromate - free


Chromate - free





16/01/2008 00:00:00



WEISSBACHERSTR. 63





y Paint







16/01/2008 00:00:00



02 Nov 2020 10:51

57/81




ess scope




WEISSBACHERSTR. 63










AP2190 0 FORDEFINITION)

27/04/2015 00:00:00



WEISSBACHERSTR. 63






General


General





16/01/2008 00:00:00



WEISSBACHERSTR. 63





Paint







16/01/2008 00:00:00



WEISSBACHERSTR. 63





systems







16/01/2008 00:00:00



WEISSBACHERSTR. 63





systems


Abrasion-Resistant


Abrasion-Resistant





16/01/2008 00:00:00



WEISSBACHERSTR. 63













16/01/2008 00:00:00



WEISSBACHERSTR. 63













27/04/2015 00:00:00



WEISSBACHERSTR. 63





80-T-35-5035 Coating with Two-coponent Water-based Primer for

Fiber Composites,Chromate-free







27/04/2015 00:00:00



WEISSBACHERSTR. 63













16/01/2008 00:00:00



WEISSBACHERSTR. 63













27/04/2015 00:00:00



WEISSBACHERSTR. 63





80-T-35-9030 Application of Fillers 80-T-35-9030 Application of Fillers Yes QUALIFIED WITHLIMITATIONS




16/01/2008 00:00:00



WEISSBACHERSTR. 63











27/04/2015 00:00:00



WEISSBACHERSTR. 63













AP2190 FORDEFINITION)

27/04/2015 00:00:00

295603 GA INDUSTRIESLTD

183, GONGDAN 4-RO, SANAM-

MYEON

SACHEON-SI 52533 South Korea SURFACETREATMENTSPECIALISTS



aluminium alloys



Yes QUALIFIED 14/11/2019 11:03:49 08/05/2013 00:00:00



MYEON












A3 Yes QUALIFIED 14/11/2019 11:03:49 24/05/2011 00:00:00



MYEON




passivation





14/11/2019 11:03:48 PROCESS ISLIMITED TO THEAPPLICATION OF

ALODINE PEN 1132

30/09/2015 00:00:00



MYEON




passivation






Yes QUALIFIED 14/11/2019 11:03:48 30/09/2015 00:00:00



MYEON




passivation




2 Yes QUALIFIED 14/11/2019 11:03:48 15/04/2015 00:00:00



MYEON





base d'époxy)


base d'époxy)

Yes QUALIFIED 14/11/2019 11:03:48 08/05/2013 00:00:00



MYEON






General


General

Yes QUALIFIED 14/11/2019 11:03:48 08/05/2013 00:00:00



MYEON





systems


systems


systems


14/11/2019 11:03:49 Varnish applicationfor over-coating part

marks

23/04/2018 09:52:53



MYEON









Yes QUALIFIED 14/11/2019 11:03:48 08/05/2013 00:00:00



MYEON








14/11/2019 11:03:48 PAINTAPPLICATION

AFTER TSA ONLY

04/09/2014 00:00:00



MYEON




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 14/11/2019 11:03:47 AIPS-00-00-006 AIPS-00-00-006 06/03/2012 00:00:00



MYEON




materials







5 Yes QUALIFIED 15/09/2020 10:35:44 22/04/2015 00:00:00



MYEON





12 Yes QUALIFIED 14/11/2019 11:03:47 AIPS-00-00-006 AIPS-00-00-006 06/03/2012 00:00:00



MYEON



296012 IPUNTO ENSAYOSE INSPECCION SL

AV. DE MERCURIO,N 2 - OFICINA 17

VILLANUEVA DELPARDILLO

28229 Spain NDT SPECIALISTS Non DestructiveTesting









02 Nov 2020 10:51

58/81




ess scope


296012 IPUNTO ENSAYOSE INSPECCION SL

AV. DE MERCURIO,N 2 - OFICINA 17

VILLANUEVA DELPARDILLO

28229 Spain NDT SPECIALISTS Non DestructiveTesting


I+D-E-280 Ultrasonic pulse-echo inspection of

carbon fibrecomposite

C1 NA Yes QUALIFIED 06/03/2019 14:06:01 ES ES 24/08/2010 00:00:00

296246 VALENCE LOSANGELES

417W 164THSTREET

GARDENA 90248 USA SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 27/10/2016 15:41:38 10/08/2011 00:00:00


417W 164THSTREET




aluminium alloys


aluminium alloys


ALUMINIUM

12 Yes QUALIFIED 27/10/2016 15:41:39 10/08/2011 00:00:00


417W 164THSTREET




aluminium alloys


aluminium alloys



417W 164THSTREET




aluminium alloys


Sealing


Sealing


31/01/2017 11:37:41 Process family 1 and3

15/03/2016 16:30:58


417W 164THSTREET




aluminium alloys


aluminium alloys


aluminium alloys


10/04/2019 17:28:18 process family 1 15/03/2016 16:28:08


417W 164THSTREET













29/11/2019 03:51:17 Part to be paintedsubsequently; noalkaline etching

before TSA

700.00 1900.00 700.00 10/08/2011 00:00:00


417W 164THSTREET





expansion



417W 164THSTREET




passivation







417W 164THSTREET




passivation







13/03/2018 15:36:40 Metallic parts 09/12/2016 15:38:58


417W 164THSTREET




passivation







417W 164THSTREET





base d'époxy)


base d'époxy)

Yes QUALIFIED 13/03/2018 15:36:38 07/11/2016 15:48:14


417W 164THSTREET






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 27/10/2016 15:41:38 10/08/2011 00:00:00


417W 164THSTREET




ADET0039 Sechage acceleredes peintures



417W 164THSTREET







417W 164THSTREET






General


General


13/03/2018 15:36:36 Metallic part 05/02/2016 18:58:44


417W 164THSTREET





systems


systems


systems

A2 Yes QUALIFIED 27/10/2016 15:41:39 10/08/2011 00:00:00


417W 164THSTREET









Yes QUALIFIED 13/03/2018 15:36:36 05/02/2016 19:06:43


417W 164THSTREET









Yes QUALIFIED 13/03/2018 15:36:38 07/11/2016 15:45:27


417W 164THSTREET









Yes QUALIFIED 13/03/2018 15:36:36 02/05/2016 22:22:43


417W 164THSTREET









16 Yes QUALIFIED 27/10/2016 15:41:38 10/08/2011 00:00:00


417W 164THSTREET








29/01/2020 13:50:03 Metallic parts only 10/08/2011 00:00:00


417W 164THSTREET







parts


parts


13/03/2018 15:36:38 Metallic parts 07/11/2016 15:52:07


417W 164THSTREET









02/03/2017 15:11:07 Manual Application 15/03/2016 16:25:49


417W 164THSTREET






AIPS05-03-005 Chemical stripping ofaircraft external paint


2 AIPI05-03-005 Chemical stripping ofaircraft external paint



03/04/2018 15:14:10 Surface < 5m² 31/05/2017 17:35:57


417W 164THSTREET



09/07/2020 14:02:51 “masking authorizedonly following

AIPS07-01-006§§4.1.2, §4.1.2.1.1,

§4.1.2.1.1.1,§4.1.2.1.1.2 and

§4.1.2.1.2.1 & AIPI07-01-006 §1.2.2;

§2.3.2; §2.3.3;§2.3.4; §3.1; §3.1.1.1

&3.1.1.4"

19/11/2019 02:10:53


417W 164THSTREET







2020-12-31 19/05/2020 13:00:49 10/08/2011 00:00:00


417W 164THSTREET




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 27/03/2020 14:47:49 30/11/2017 21:48:00


417W 164THSTREET




materials







5 Yes QUALIFIED 22/10/2019 19:18:44 24/04/2019 19:51:54


417W 164THSTREET




materials



FOUCAULT )

E IGC04-25-120 INSTRUCTIONSFOR INSPECTIONS

BY ELECTRICALCONDUCTIVITY

EDDY CURRENTS

E Yes QUALIFIED 22/10/2019 19:27:26 21/01/2019 11:09:24


417W 164THSTREET




DETECTION



417W 164THSTREET








02 Nov 2020 10:51

59/81




ess scope



417W 164THSTREET



296380 BODYCOTEWAERMEBEHANDL

UNG GMBH

HOLZENER STR. 39 MENDEN 58708 Germany HEAT TREATMENTSPECIALISTS



general


General

2 NO_AIRBUS_PI Yes QUALIFIED 29/09/2020 14:50:38


UNG GMBH




alloys




27/09/2019 09:29:29 LIMITED TOSTRESS

RELIEVINGPROCESS.

21/01/2013 00:00:00


UNG GMBH




alloys


alloys


alloys


27/09/2019 09:17:53 Limitation to stressrelieve, applicable to

all titanium alloysreferenced in theAIPI04-02-001

27/07/2018 10:56:41


UNG GMBH






Yes QUALIFIED 27/09/2019 09:39:43 26/01/2008 00:00:00

296416 MISTRAS GROUPINC.

7820 S. 210TH KENT 98032 USA NDT SPECIALISTS Non DestructiveTesting

Ultrasonic Reflector plateultrasonic inspection

AITM6-4021 Reflector plateultrasonic inspection

2 AITM6-4021 Reflector plateultrasonic inspection


09/07/2019 14:58:28 LIMITTED TO A350FRAME CLIPS

ONLY

QCS120613 QCS120613 20/07/2012 00:00:00







ultrasonore



ultrasonore

3 Yes QUALIFIED 04/07/2019 15:33:32 15/03/2016 15:39:36









09/07/2019 15:00:16 LIMITED TO A350FRAME CLIPS

ONLY

QCS128588 QCS128588 20/07/2012 00:00:00

296808 HUENEFELD NDT-TECHNOLOGIE

ASKANIAWEG 12 UEBERLINGEN 88662 Germany NDT SPECIALISTS Non DestructiveTesting



techniques



array»



array»


27/05/2020 11:46:04 See QCS126968 /QCS 140648

QCS126968;QCS140648

QCS126968;QCS140648

; 29/07/2015 00:00:00

296808 HUENEFELD NDT-TECHNOLOGIE

ASKANIAWEG 12 UEBERLINGEN 88662 Germany NDT SPECIALISTS Non DestructiveTesting







27/05/2020 11:49:01 See QCS126968 /QCS 140648

QCS126968;QCS140648

QCS126968;QCS140648

; 29/07/2015 00:00:00

297107 TRATERCOM S.L.L -TRATAMIENTOSTERMICOS DE

COMPONENTESAERO

AV DE MAREINA 12 BOLLULLOS DE LAMITACION

41110 Spain HEAT TREATMENTSPECIALISTS



general


General


07/07/2020 14:55:14 Qualification listMGC-TTC-01 at the

latest issue

19/03/2020 14:16:51


COMPONENTESAERO









latest issue

16/06/2012 00:00:00


COMPONENTESAERO






ALLOY STEELS


ALLOY STEELS



latest issue

12/02/2013 00:00:00


COMPONENTESAERO






REFRACTORYSTEELS


REFRACTORYSTEELS



latest issue

12/02/2013 00:00:00


COMPONENTESAERO









Not for aircrafts inservice

18/03/2020 14:20:25


COMPONENTESAERO






I+D-E-136 Magnetic particleinspection process

D I+D-E-136 Magnetic particleinspection process

D Yes QUALIFIED WITHLIMITATIONS

Not applicable foraircraft in services

18/03/2020 14:04:17


COMPONENTESAERO






12 Yes QUALIFIED 19/03/2020 14:02:12


COMPONENTESAERO






E Yes QUALIFIED 19/03/2020 13:55:27

297138 BWB SURFACETECHNOLOGY SRL

STR HERMANNOBERTH NR 30

GHIMBAV 507075 Romania SURFACETREATMENTSPECIALISTS



aluminium alloys


Sealing


Sealing





11/07/2011 00:00:00






aluminium alloys




26/10/2018 11:40:09 hot water sealingonly.

26/10/2018 11:34:38






aluminium alloys


aluminium alloys


aluminium alloys




AP2190.0 FORDEFINITION) OFSMALL SHEET

METALSALUMINIUM

20/10/2015 00:00:00









Aluminum Alloys


Aluminum Alloys





10/03/2015 00:00:00


















500.00 230.00 120.00 20/10/2015 00:00:00






passivation





16/09/2019 10:58:57 APPLICATION ONCOMPOSITE

PARTS EXCLUDED/

04/03/2015 00:00:00






passivation








PARTS EXCLUDED

04/03/2015 00:00:00






passivation





16/09/2019 10:56:48 APPLICATION BYALODINE PEN AND

ALODINESOLUTION ONLY

12/10/2015 00:00:00








General


General



PARTS EXCLUDED

04/03/2015 00:00:00







Paint





PARTS EXCLUDED

18/04/2012 00:00:00







systems



Yes QUALIFIED 16/09/2019 11:01:47 12/10/2015 00:00:00







systems

80-T-35-5218 Application deRevêtements de

Protection Elastiques





PARTS EXCLUDED

04/03/2015 00:00:00



02 Nov 2020 10:51

60/81




ess scope














PARTS EXCLUDED

04/03/2015 00:00:00











Yes QUALIFIED 16/09/2019 11:09:09 27/10/2017 09:50:50













PARTS EXCLUDED

04/03/2015 00:00:00











PARTS EXCLUDED/ LIMITED TOEXTENDED


AP2190.0 FORDEFINITION) OFSMALL SHEET

METALSALUMINIUM

11/07/2011 00:00:00









parts


parts

2 Yes QUALIFIED 16/09/2019 11:04:22 12/10/2015 00:00:00






80-T-34-9600 Application deProduits d`Etanchéité




PARTS EXCLUDED

18/04/2012 00:00:00









16/09/2019 11:10:42 USAGE OFSEMKITS ONLY

12/10/2015 00:00:00











PARTS EXCLUDED

04/03/2015 00:00:00











A6 Yes QUALIFIED 16/09/2019 11:13:25 12/10/2015 00:00:00





16/09/2019 11:12:37 PROCESS FP1, 2, 3and 4

12/10/2015 00:00:00






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 16/09/2019 11:16:07 ON SITE EVIDENCE ON SITE EVIDENCE 10/03/2015 00:00:00























TBD TBD Rinsing 80-T-35-0090 Rinsing 80-T-35-0090 Rinsing Yes QUALIFIED 23/11/2018 14:49:53 60.00 300.00 100.00 23/11/2018 14:47:44

297304 MISTRASSERVICES INC.

915 ST CHARLES ST LAMBERT J4P 2A2 Canada NDT SPECIALISTS Non DestructiveTesting





4 Yes QUALIFIED 13/09/2018 13:20:22 10/03/2015 00:00:00

297304 MISTRASSERVICES INC.

915 ST CHARLES ST LAMBERT J4P 2A2 Canada NDT SPECIALISTS Non DestructiveTesting




13/09/2018 13:20:22 ALUMINIUM PARTSAND SENSITIVITY

LEVEL 3 ONLY

07/07/2015 00:00:00

297309 STTS STETOULOUSAINETRAITEMENTS

SURFACE

15 RUE DELARSENAL

ROCHEFORT 17300 France SURFACETREATMENTSPECIALISTS





METALL


27/02/2020 15:58:50 Type 1 and Type 2ONLY FOR THEUSE OND ON

STELIAROCHEFORT SITE

24/01/2019 11:04:22


SURFACE

15 RUE DELARSENAL







parts


parts


23/07/2019 09:51:59 PAINT TOUCH UPONLY

16/02/2012 00:00:00


SURFACE

15 RUE DELARSENAL




ADET0082 Application desmastics

M IPDA77-01 DECONGELATION -APPLICATION DES

MASTICS


31/01/2019 10:33:31 Only for use onSTELIA

ROCHEFORT site

24/01/2019 11:31:08


SURFACE

15 RUE DELARSENAL









A6 Yes QUALIFIED 11/06/2019 10:58:45 18/12/2013 00:00:00

297446 TESTIA FRANCE ZI DU CHAFFAULTTECHNOCAMPUS

BOUGUENAIS 44340 France NDT SPECIALISTS Non DestructiveTesting


detection








LIMITATIONS

2020-12-03 27/05/2020 14:43:18 Limited to Temporaryuse of SPIRIT WorkInstruction SNZ-OI-

28-11, Rev 2 atlocations specified.

03/03/2020 17:31:12





techniques



array»



array»


26/11/2019 08:56:23 SEE QCSIMPACTED

QCS126975;QCS130706;QCS171121;QCS17

1122

QCS126975;QCS130706;Automatic UltrasonicPE Phased Array of

A350-1000;Automatic UltrasonicPE Phased Array of

A350-1000

; ;PREPREG-EP CFRP-FABRIC

ABS5003B0000EPOXY PREPREG

ABS5347A0000-01PREGGLASS

FABRICABS5009H42EP100,M;PREPREG-EP C

FRP-FABRICABS5003B0000EPO

XY PREPREGABS5347A0000-01PREGGLASS

FABRICABS5009H42EP100,

M

28/11/2013 00:00:00







13/09/2018 13:20:22 QCS 140006 QCS140006;QCS120614

QCS140006;QCS120614

; 26/09/2012 00:00:00



Ultrasonic Throughtransmission

ultrasonic inspectionof CFRP and

sandwich

AITM6-4002 Ultrasonic throughtransmission

inspection of fibreplastics

7 AITM6-4002 Ultrasonic throughtransmission



29/10/2018 10:10:24 In Accordance WithQCS Impacted

140633 A350 AFT bulkheadparts, using an

Ultrasonic Throu

Material: Monolithicarea: Carbon fibrereinforced prepare

8552S/37%/AGP280/C (Thickness per

ply0.28

22/12/2015 00:00:00









26/11/2019 08:32:57 SEE QCSIMPACTED AND

A350-UT-NDTExperts

A350-UT-NDTExperts ;QCS

140005;QCS120613;QCS140619;QCS140718;QCS171119

;QCS181462

ATK stringersinspections in Nantes

& St-Nazaire;QCS

140005;QCS120613;QCS140619;QCS140718;A350-1000 AFTBLKD ;QCS181462

-Stringers en T et O;-IMA 21E 194g de

2mm à 13mm;-Flat surface only;

; ; ; ; ;PREPREG-EPC FRP-FABRIC

ABS5003B0000EPOXY PREPREG

ABS5347A0000-01PREGGLASS

FABRICABS5009H42EP100,

M;6 to 8 plies ofCFRP

M42/48%/285H5/AS4C-3K,;

ABS5862A0000-01& IPS 05-01-

016-01;Structure build up:

26/09/2012 00:00:00





holes in composites








02/12/2019 13:54:45 NDI method Manualpulse echo techniqueaccording to AITM 6-4022 Material typePREPREG-EP C

FRP-FABRICABS5003B0000EPO

XY PREPREGABS5347A0000-01PREGGLASS

FABRICABS5009H42EP100

All followingreferences are within

the scope of thisQCS A350-1000

AFT BLKD, Drawingreferences V541

11392 200 00, V54111432 200 00, V54111435 200 00, PN

V541 11471 200 00,V541 11468 200 00,

V541 11487 20000Structures build upmonolithic Thickness

from 3,64 to 4,02mm. Facility

TESTIA,BOUGUENAIS plant,

France

QCS171120 Qualification of NDTTESTIA,

Technocampus,Nantes,

PREPREG-EP CFRP-FABRIC

ABS5003B0000EPOXY PREPREGABS5347A0000-01

PREGGLASSFABRIC

ABS5009H42EP100,

18/04/2018 14:16:39



02 Nov 2020 10:51

61/81




ess scope


297495 TECNIPAINTPINTURA S.L.

PG INDUSTRIALLOS PALILLOS

ALCALA DEGUADAIRA

41500 Spain SURFACETREATMENTSPECIALISTS











A3 Yes QUALIFIED 10/02/2020 08:58:18 16/01/2014 00:00:00



ALCALA DEGUADAIRA





expansion


10/02/2020 08:58:18 group II (Precipitationsteel) and group III

(titanium alloys)

16/09/2016 11:48:27



ALCALA DEGUADAIRA




passivation





04/03/2020 15:14:37 Local applicationwithout paint andrepair application

11/02/2020 09:13:26



ALCALA DEGUADAIRA




passivation


Steel


Steel


Steel


10/02/2020 08:58:18 No pickling operationbefore passivation

17/03/2017 08:38:51



ALCALA DEGUADAIRA







10/02/2020 08:58:19 The report are filledas IN QCS-021A-

248679-AT-AEbecause previous

qualification by CoETT Airbus

04/04/2014 00:00:00



ALCALA DEGUADAIRA






and assemblies

C Yes QUALIFIED 10/02/2020 08:58:19 21/01/2009 00:00:00



ALCALA DEGUADAIRA






E Yes QUALIFIED 10/02/2020 08:58:19 21/01/2009 00:00:00



ALCALA DEGUADAIRA




Application of anti-erosion paint

AIPS05-02-013 Application of anti-erosion paint

2 AIPI05-02-013 Application of anti-erosion paint

2 Yes QUALIFIED 06/07/2020 11:58:58 03/07/2020 12:37:00



ALCALA DEGUADAIRA





systems


systems


systems


10/02/2020 08:58:19 TEST BASED ONISO2813 TO BE

PERFORMED ATEXTERNAL LAB

29/06/2016 16:25:11



ALCALA DEGUADAIRA







A3 Yes QUALIFIED 10/02/2020 08:58:17 29/06/2016 16:19:43



ALCALA DEGUADAIRA








10/02/2020 08:58:17 The report are filledas IN QCS-021A-

248679-AT-AEbecause previous

qualification by CoETT Airbus

04/04/2014 00:00:00



ALCALA DEGUADAIRA







and assemblies

C Yes QUALIFIED 10/02/2020 08:58:17 21/01/2009 00:00:00



ALCALA DEGUADAIRA







E Yes QUALIFIED 10/02/2020 08:58:17 21/01/2009 00:00:00



ALCALA DEGUADAIRA







parts


parts


06/07/2020 11:58:59 Only for applicationof CFRP

substrates;AIPS/AIPI02-05-001 (ChemicalConversion Coating)

not qualified

03/07/2020 12:37:00



ALCALA DEGUADAIRA



10/02/2020 08:58:17 LIMITED TOSURFACE

PREPARATION(SP7) AND

TEMPORARYPROTECTION

09/09/2016 11:20:08



ALCALA DEGUADAIRA






3 Yes QUALIFIED 10/02/2020 08:58:16 11/10/2017 11:26:14



ALCALA DEGUADAIRA




application


application


application

2 Yes QUALIFIED 06/07/2020 11:59:00 03/07/2020 12:37:01



ALCALA DEGUADAIRA




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 10/02/2020 08:58:16 09/12/2013 00:00:00



ALCALA DEGUADAIRA













ALCALA DEGUADAIRA




materials










ALCALA DEGUADAIRA






10/02/2020 08:58:16 ALL ALUMINIUMAND TITANIUM

PARTS ANDLEGACY

STAINLESS STEELPARTS AND NO

LEGACYSTAINLESS STEELWITHOUT ETCHING

30/09/2015 00:00:00



ALCALA DEGUADAIRA






22/04/2020 08:40:53 All Aluminum andTitanium part and

legacy stainless steelparts and no legacy

stainless steelwithout etching

04/02/2020 15:06:52

297544 MIKRONMUHENDISLIK LTD

STI

AGAC ISLERISANAYI SITESI

IVEDIK 6378 Turkey SURFACETREATMENTSPECIALISTS













WORKBENCHORDERS ONLY

20/02/2015 00:00:00


STI





agents


Plating

I+D-P-047 Chemical nickelplating

B1 I+D-P-047 Chemical nickelplating

B1 Yes QUALIFIED 29/10/2019 15:23:30 29/10/2019 11:41:12


STI





agents



5 I+D-P-115 Electrolytic cadmiumplating

C2 Yes QUALIFIED 27/10/2016 15:46:33 10/03/2015 00:00:00


STI





agents







20/02/2015 00:00:00


STI





passivation





29/10/2019 15:26:42 Limited to Bonderitepen.

08/01/2019 09:07:41


STI





passivation






Yes QUALIFIED 29/10/2019 15:28:12 08/01/2019 09:01:18


STI





passivation







20/02/2015 00:00:00


STI





passivation


Steel


Steel


Steel



WORKBENCHORDERS ONLYWITHOUT DRY

BLASTINGPROCESS AIPI_02-

02-002

20/02/2015 00:00:00



02 Nov 2020 10:51

62/81




ess scope



STI





passivation



I+D-P-038 Cleaning andpassivation of


cobalt alloys

E7 I+D-P-038 Cleaning andpassivation of


cobalt alloys

E7 Yes QUALIFIED WITHLIMITATIONS

29/10/2019 15:24:43 TYPE 1 ALLOY ANDNO SANDBLASTING

29/10/2019 10:57:59


STI






80-T-39-0230 Treatment ofDamage on

Components Made ofAluminium-Alloy

80-T-39-0230 Treatment ofDamage on

Components Made ofAluminium-Alloy

Yes QUALIFIED 15/03/2019 15:58:49 08/01/2019 10:40:59


STI







General


General

Yes QUALIFIED 15/03/2019 15:58:49 08/01/2019 08:08:52


STI






systems


systems


systems




20/02/2015 00:00:00


STI










Yes QUALIFIED 15/03/2019 15:58:49 08/01/2019 08:42:10


STI










Yes QUALIFIED 15/03/2019 15:58:49 08/01/2019 08:25:38


STI











20/02/2015 00:00:00


STI





I+D-P-090 Cleaning and picklingof titanium andtitanium alloys

D I+D-P-090 Cleaning and picklingof titanium andtitanium alloys

D Yes QUALIFIED WITHLIMITATIONS

29/10/2019 15:25:38 limitation to method 1and 2

29/10/2019 14:25:52


STI







21/03/2019 13:22:15 Type 1.A.3 andAluminium (allprograms) and

titanium (Legacy)pickling on-site

NONE NONE 19/08/2013 00:00:00


STI






21/03/2019 13:23:20 Type 1.A.3 andAluminium and

titanium pickling on-site

NONE NONE 19/08/2013 00:00:00

297654 SOULE PEINTURESINDUSTRIELLESAERO SPI AERO

61 AVENUE DETREVILLE

MAULEONLICHARRE





fixations )




MAULEONLICHARRE




aluminium alloys


aluminium alloys


14/11/2019 11:05:32 LINE B AND C 13/06/2013 00:00:00



MAULEONLICHARRE













14/11/2019 11:05:32 PAINTED PARTSONLY

28/04/2016 14:48:12



MAULEONLICHARRE




passivation


ADET0175 Retouche deprotection par

chromatation suralliages d aluminium


12/03/2020 08:38:06 BATH AND LOCALAPPLICATION

PROCESS, TYPE 1ONLY.

01/03/2013 00:00:00



MAULEONLICHARRE




passivation





14/11/2019 11:05:31 BATH AND LOCALAPPLICATION

PROCESSES, TYPE1 ONLY.

01/03/2013 00:00:00



MAULEONLICHARRE




passivation


Steel


Steel


Steel


12/03/2020 08:49:43 limited to parts withRm < 1100 MPa and

without etching.

06/02/2018 14:28:39



MAULEONLICHARRE





J NA Yes QUALIFIED WITHLIMITATIONS

14/11/2019 11:05:32 METALLIC PARTSONLY. ON PAINT

WORKSHOP 1 AND6.

20/10/2015 00:00:00



MAULEONLICHARRE








14/11/2019 11:05:31 FOR METALLICPARTS ONLY.

13/08/2012 00:00:00



MAULEONLICHARRE




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 12/03/2020 08:35:28 24/08/2016 15:28:24



MAULEONLICHARRE






297819 ASCOT METALFINISHERS LIMITED

6 DAVID ROAD COLNBROOKSLOUGH

SL30DG United Kingdom SURFACETREATMENTSPECIALISTS




y Paint

AIPS05-02-015 Application of AntislipEmergency/Walkway

Paint

2 AIPI05-02-015 Application of AntislipEmergency/Walkway

Paint

1 Yes QUALIFIED 25/03/2020 09:33:38 14/05/2013 14:43:14









Yes QUALIFIED 25/03/2020 09:33:38 26/11/2013 00:00:00








General


General

Yes QUALIFIED 25/03/2020 09:33:39 29/03/2012 00:00:00







systems



Yes QUALIFIED 25/03/2020 09:33:43 29/03/2012 00:00:00







systems

80-T-35-5202 Coating with HighlyElastic Paints

80-T-35-5202 Coating with HighlyElastic Paints

Yes QUALIFIED 25/03/2020 09:33:49 29/03/2012 00:00:00







systems





Yes QUALIFIED 25/03/2020 09:33:44 29/03/2012 00:00:00











Yes QUALIFIED 25/03/2020 09:33:47 29/03/2012 00:00:00











Yes QUALIFIED 25/03/2020 09:33:48 26/11/2013 00:00:00











Yes QUALIFIED 25/03/2020 09:33:46 30/07/2014 00:00:00
















A3 Yes QUALIFIED 25/03/2020 09:41:21 30/07/2014 14:07:15





08/07/2020 16:43:42 Only for TP2 24/10/2017 15:03:28

298043 SIGNATUREAEROSPACE

6090 RUE VANDENABEELE

SAINT-LAURENT H4S 1R9 Canada SURFACETREATMENTSPECIALISTS



aluminium alloys


aluminium alloys

2 IPDA62-02 OXYDATIONANODIQUE

CHROMIQUE DESALL ALU

A5 Yes QUALIFIED 14/11/2019 11:07:39 17/09/2015 00:00:00








METALL


14/11/2019 11:07:39 Metallica parts 03/08/2016 21:08:10



02 Nov 2020 10:51

63/81




ess scope











14/11/2019 11:07:38 Metallic parts 03/08/2016 21:04:43












3 Yes QUALIFIED 14/11/2019 11:07:38 25/11/2015 00:00:00

298080 TECNICKROMEAERONAUTIQUE

INC

12264 APRIL MONTREAL H1B 5N5 Canada SURFACETREATMENTSPECIALISTS



general


General



INC







02/11/2020 08:46:05 STRESS RELIEVEONLY

OVENS N°2 ANDN°6.

23/11/2015 00:00:00


INC







4 Yes QUALIFIED 14/11/2019 11:08:21 06/01/2016 00:00:00


INC






14/11/2019 11:08:20 Steel ALLOYS ONLY 06/01/2016 00:00:00

298365 METINJOMETALIZACAO

INDUSTRIALJOSEENSE LTDA

RUA BETIM, NO 80-PUTIM

SAO JOSE DOSCAMPOS-SP

12228-080 Brazil SURFACETREATMENTSPECIALISTS



aluminium alloys



Yes QUALIFIED 14/11/2019 11:09:06 05/06/2012 00:00:00








agents




Yes QUALIFIED 14/11/2019 11:09:06 05/06/2012 00:00:00








passivation







Yes QUALIFIED 14/11/2019 11:09:06 05/06/2012 00:00:00









base d'époxy)


base d'époxy)

Yes QUALIFIED 14/11/2019 11:09:06 05/06/2012 00:00:00













Yes QUALIFIED 14/11/2019 11:09:07 05/06/2012 00:00:00









Acid -


Acid -

Yes QUALIFIED 14/11/2019 11:09:07 05/06/2012 00:00:00




















12 Yes QUALIFIED 14/11/2019 11:09:06 AITM 6-1001 AITM 6-1001 17/12/2012 00:00:00

298557 PESOLA PECASUSINADAS

AERONAUTICASLTDA

RUA JOSE DECAMPOS, N 270

SAO JOSE DOSCAMPOS SAO

PAULO





nuts


nuts

A3 Yes QUALIFIED 31/08/2020 08:37:26 31/01/2019 19:21:23


AERONAUTICASLTDA



PAULO





fasteners


fasteners


fasteners


31/08/2020 08:37:26 Limited to small sub-assembly’s only

31/01/2019 17:28:42


AERONAUTICASLTDA



PAULO






AIPS01-02-013 Installation of BlindBolts and Blind


5 AIPI01-02-013 Installation of BlindBolts and Blind


A4 Yes QUALIFIED 31/08/2020 08:37:26 31/01/2019 19:01:08


AERONAUTICASLTDA



PAULO





press fit


press fit


press fit

2 Yes QUALIFIED 29/04/2019 15:13:50 11/06/2018 04:24:41


AERONAUTICASLTDA



PAULO





fasteners

AIPS01-02-022 Installation of parallelshank threaded

fasteners

4 AIPI01-02-022 Installation of parallelshank threaded

fasteners

A2 Yes QUALIFIED 31/08/2020 08:37:25 31/01/2019 18:01:31


AERONAUTICASLTDA



PAULO





for fastening


for Fastening


for Fastening

A1 Yes QUALIFIED 29/04/2019 15:13:50 06/06/2018 16:52:30


AERONAUTICASLTDA



PAULO











29/04/2019 15:13:51 Limited to Installationby Press Swaging

(Installation by rollerSwaging not

qualified)

11/06/2018 04:15:21


AERONAUTICASLTDA



PAULO






A5 Yes QUALIFIED 31/08/2020 08:37:27 30/11/2018 13:22:04


AERONAUTICASLTDA



PAULO






A4 Yes QUALIFIED 31/08/2020 08:37:27 30/11/2018 13:30:01

298848 HYUNE AERO-SPECIALTY INC

1754-2,SONGJEONG-

DONG

BUSAN 46731 South Korea NDT SPECIALISTS 01 JoiningTechniques



for fastening


for Fastening


for Fastening


06/03/2020 11:24:18 Aluminium material &automatic drilling

only

04/10/2018 18:40:36


1754-2,SONGJEONG-

DONG

BUSAN 46731 South Korea NDT SPECIALISTS 05 Paints, Coatings,Filler, Sealant



systems


systems


systems


06/03/2020 11:24:18 Varnish application toprotect part marking

only

04/10/2018 18:55:02


1754-2,SONGJEONG-

DONG

BUSAN 46731 South Korea NDT SPECIALISTS Non DestructiveTesting


materials







5 Yes QUALIFIED 06/03/2020 11:24:18 04/10/2018 19:08:46


1754-2,SONGJEONG-

DONG

BUSAN 46731 South Korea NDT SPECIALISTS Non DestructiveTesting






299050 SERVICIOS DECONTROL E

INSPECCION SCISA

CR AJALVIRTORREJON KM 1.8

MADRID 28864 Spain NDT SPECIALISTS Non DestructiveTesting



I+D-E-138 Radiographicinspection

E NA Yes QUALIFIED 13/09/2018 13:21:14 TTPQ-SCI-11-01 TTPQ-SCI-11-01 23/11/2011 00:00:00

299385 PLASMATECHNOLOGY

INCORPORATED

1754 CRENSHAWBOULEVARD

TORRANCE 90501 USA SURFACETREATMENTSPECIALISTS









21/03/2018 09:58:55 NON 12/06/2014 00:00:00

299486 THERMOCOMPACT 181 ROUTE DESARVES

METZ TESSY 74371 France SURFACETREATMENTSPECIALISTS



agents

Electroless chemicalNickel Phosphorus -PTFE duplex coating

AIPS02-04-011 Electroless(chemical) Nickel


2 AIPI02-04-011 Electroless(chemical) Nickel


1 Yes QUALIFIED 14/11/2019 11:09:56 090676 Electroless(chemical) Nickel

Phosphorous - PTFE

This Airbus ProcessSpecification definesthe requirement for a

duplex coatingconsisting of an elec

04/05/2012 00:00:00

299659 MECAPROTECAERO

RUE DE TOZEUR FOUCHANA 2082 Tunisia SURFACETREATMENTSPECIALISTS



aluminium alloys


Sealing


Sealing

Yes QUALIFIED 29/09/2020 13:39:05 30/03/2020 16:04:16





aluminium alloys








aluminium alloys


aluminium alloys


aluminium alloys


26/11/2019 17:47:07 SAA qualified on 2lines L & R

05/10/2012 00:00:00



02 Nov 2020 10:51

64/81




ess scope















26/07/2019 16:51:08 POST TREATMENTBY ALODINE 1200TOUCH UP ONLY.

1400.00 100.00 350.00 05/10/2012 00:00:00






expansion


Limitation onAluminium parts for

deburring, scaleremoval and beforepainting process, onTitanium parts andsteels parts (withstrengths = 1516

Mpa) before paintingprocess.

09/10/2017 16:12:24





passivation






Yes QUALIFIED 29/09/2020 13:25:26 29/04/2020 14:44:58





passivation





01/06/2016 15:05:10 BATH AND TOU'UPAPPLICATION

05/10/2012 00:00:00






J NA Yes QUALIFIED 01/06/2016 15:03:04 05/10/2012 00:00:00







General


General

Yes QUALIFIED 29/09/2020 13:23:42 30/03/2020 15:29:51






Paint



Yes QUALIFIED 29/09/2020 13:22:07 30/03/2020 15:38:25






systems


systems


systems


03/10/2016 09:50:07 FOR INK MARKINGPROTECTION ONLY

29/03/2016 18:07:20










Yes QUALIFIED 29/09/2020 13:29:54 29/04/2020 14:25:57










Yes QUALIFIED 29/09/2020 13:31:04 29/04/2020 14:32:23








A3 Yes QUALIFIED 01/06/2016 14:38:57 05/10/2012 00:00:00








parts


parts


01/06/2016 15:23:38 REWORK ONMETALLIC

SURFACES ONLY

26/06/2013 00:00:00











01/06/2016 15:27:15 REWORK ONMETALLIC

SURFACES ONLY

30/03/2015 00:00:00




21/09/2017 11:37:14 Only for : surfacepreparation SP4 and

SP7; Temporaryprotection TP1 and

TP2

29/06/2016 14:42:55








28/05/2018 23:05:48 Limited to chemicalpreparation before

FPI.

1100.00 3600.00 1300.00 09/10/2017 16:21:55





anodising process



surface resistance)



surface resistance)


26/11/2019 17:31:56 limited to TSAinspection as perAIPI02-01-003

26/11/2019 17:31:17












22/01/2020 11:55:38 limited on coatingthickness

measurement onaluminium parts.

22/01/2020 11:53:58







13/09/2018 13:24:21 LIMITED TOALUMINIUM AND

TITANIUM PARTS.

NO NO 05/10/2012 00:00:00




299943 ABBEY METALFINISHING CO LTD

DODSWELL ROAD LEICESTERSHIRE LE10 3BZ United Kingdom SURFACETREATMENTSPECIALISTS











A3 Yes QUALIFIED 14/11/2019 11:11:02 04/02/2013 00:00:00






expansion






passivation




2 Yes QUALIFIED 14/11/2019 11:11:02 22/10/2014 00:00:00






systems


systems


systems


14/11/2019 11:11:02 THE USE OF AVIOXCLEARCOAT UVR

ONLY

23/09/2015 00:00:00








A3 Yes QUALIFIED 14/11/2019 11:11:02 04/02/2013 00:00:00








parts


parts

2 Yes QUALIFIED 14/11/2019 11:11:02 23/09/2015 00:00:00






AIPS05-03-001 Paint stripping byplastic media blasting









LIMITATIONS

2020-11-14 13/05/2020 15:35:39 limited to picklingbefore FPI

14/02/2020 15:06:43





DETECTION


14/11/2019 11:11:03 limited to aluminiumparts only (as ABP8-2299 for titanium and

ABP8-2298 forstainless steel not

qualified)

NONE NONE 16/01/2013 00:00:00







LIMITATIONS

2020-11-14 15/06/2020 18:56:42 limited to aluminumand titanium parts

only (asAIPS/AIPI09-02-006

for Steel notqualified).

NONE NONE 31/03/2015 00:00:00

300479 SOCIETE DETUDEET DE

FABRICATION DESOUTILLAGES

AERONAUTIQUESEFOA

9 KM 21 ZONEINDUSTRIELLE

CASABLANCA 20240 Morocco SURFACETREATMENTSPECIALISTS



aluminium alloys


aluminium alloys

2 NA Yes QUALIFIED 14/11/2019 11:11:53 04/03/2013 00:00:00



AERONAUTIQUESEFOA





aluminium alloys






02 Nov 2020 10:51

65/81




ess scope




AERONAUTIQUESEFOA





aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 14/11/2019 11:11:53 02/06/2014 00:00:00



AERONAUTIQUESEFOA













A3 Yes QUALIFIED 14/11/2019 11:11:53 2000.00 3650.00 900.00 18/12/2015 00:00:00



AERONAUTIQUESEFOA






ADET0098 Rilsanisation desalliages d aluminium




AERONAUTIQUESEFOA





passivation





14/11/2019 11:11:54 BATH APPLICATIONONLY

04/03/2013 00:00:00



AERONAUTIQUESEFOA





passivation


Steel


Steel


Steel


14/11/2019 11:11:54 RESTRICTED TOPARTS WITH

RM<1100 MPA

02/06/2014 00:00:00



AERONAUTIQUESEFOA





passivation




austenitiques


14/11/2019 11:11:54 FINALPASSIVATION OF

AUSTENITIC STEELPARTS CLASS 2S

ANS 3

02/06/2014 00:00:00



AERONAUTIQUESEFOA






J NA Yes QUALIFIED WITHLIMITATIONS

14/11/2019 11:11:53 METALLIC PARTS 04/03/2013 00:00:00



AERONAUTIQUESEFOA









14/11/2019 11:11:53 METALLICS PARTSONLY

05/01/2016 00:00:00



AERONAUTIQUESEFOA




14/11/2019 11:11:52 RESTRICTED TOSURFACE

PREPARATION

11/09/2013 00:00:00



AERONAUTIQUESEFOA





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 14/11/2019 11:11:52 15/04/2014 00:00:00



AERONAUTIQUESEFOA





materials







5 Yes QUALIFIED 14/11/2019 11:11:52 19/04/2016 17:54:12



AERONAUTIQUESEFOA







14/11/2019 11:11:52 Penetrant Type1.2.A.a/d and Type

1.3.D.a/d

NONE NONE 04/03/2013 00:00:00

300726 EIPC RESEARCHCENTER AIE

CL TORREKUA 3 EIBAR 20600 Spain NDT SPECIALISTSAFM-003-4 TEST

LAB





13/09/2018 13:21:14 LIMITED TO ALFAPRECISIONCASTING

NA NA 08/01/2014 00:00:00

300726 EIPC RESEARCHCENTER AIE

CL TORREKUA 3 EIBAR 20600 Spain NDT SPECIALISTSAFM-003-4 TEST

LAB









24/03/2020 10:41:56 FILM ONLY ANDLIMITED TO ALFA

PRECISIONCASTING

NA NA 08/01/2014 00:00:00

301236 FORGEDSOLUTIONS

GROUP LIMITED

DALE ROAD MATLOCK DE4 2JB United Kingdom NDT SPECIALISTS Non DestructiveTesting




Detection

3-2 NA Yes QUALIFIED 13/09/2018 13:20:24 NA NA 14/01/2013 00:00:00


GROUP LIMITED






GROUP LIMITED



DETECTION


DETECTION


DETECTION


301500 MIKRONMUHENDISLIK LTD.

STI.

IVEDIK ORGANIZESANAYI BOLGESI

ANKARA 6378 Turkey SURFACETREATMENTSPECIALISTS



aluminium alloys

I+D-P-213 Anodizing ofAluminium and

Aluminium Alloys

B6 I+D-P-213 Anodizing ofAluminium and

Aluminium Alloys


29/10/2019 16:58:39 limitation to chromicanodizing

29/10/2019 16:57:51


STI.






expansion

Dry blasting I+D-P-074 Abrasive cleaning B3 I+D-P-074 Abrasive cleaning B3 Yes QUALIFIED 16/07/2020 15:49:47 12/06/2019 12:14:52


STI.





passivation


I+D-P-202 Chemical conversionfilms on aluminium

and its alloys

C I+D-P-202 Chemical conversionfilms on aluminium

and its alloys


29/10/2019 16:44:05 LIMITATION TOTYPE 1 ONLY

29/10/2019 16:43:39


STI.





I+D-P-064 Paint systems formetallic detail parts

and assemblies

C I+D-P-064 Paint systems formetallic detail parts

and assemblies

C Yes QUALIFIED 07/11/2019 16:32:33 07/11/2019 16:29:43


STI.






systems

I+D-P-060 Paint (Generalspecification)

C7 I+D-P-060 Paint (Generalspecification)

C7 Yes QUALIFIED 07/11/2019 16:45:54 29/10/2019 17:07:56


STI.



TBD TBD Fatigue preventionby means of wet

blast tfch

I+D-P-107 Fatigue preventionby means of wet

blast tfch

4 I+D-P-107 Fatigue preventionby means of wet

blast tfch

4 Yes QUALIFIED 07/11/2019 16:00:32 16/04/2013 00:00:00

302040 AEROSTRUTTURESPA

VIA ARINGO 5 CASTELLIRI 3030 Italy SURFACETREATMENTSPECIALISTS



aluminium alloys



H NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

14/11/2019 11:12:40 ONLY ONEXTRUDED PARTS

18/11/2015 00:00:00

302040 AEROSTRUTTURESPA

VIA ARINGO 5 CASTELLIRI 3030 Italy SURFACETREATMENTSPECIALISTS



passivation





302129 ACTION G.M.G.GMBH

BAHNHOFSTR. 17 RADEBURG 1471 Germany SURFACETREATMENTSPECIALISTS



passivation






25/07/2019 16:34:06





passivation








16/01/2008 00:00:00





passivation





01/04/2020 15:35:23 Type I – localApplication Alodine

Pen 1132

25/07/2019 16:41:59






base d'époxy)


base d'époxy)



16/01/2008 00:00:00






Polyurethane Primer


Polyurethane Primer





16/01/2008 00:00:00



02 Nov 2020 10:51

66/81




ess scope








e



e



16/01/2008 00:00:00






Chromate - free


Chromate - free





16/01/2008 00:00:00






y Paint







16/01/2008 00:00:00







General


General



16/01/2008 00:00:00






Paint







16/01/2008 00:00:00






systems







16/01/2008 00:00:00






systems


Abrasion-Resistant


Abrasion-Resistant



16/01/2008 00:00:00






systems


systems


systems



12/05/2016 10:13:20














16/01/2008 00:00:00










09/05/2016 11:30:28












16/01/2008 00:00:00










09/05/2016 11:34:43
















09/05/2016 11:46:32








parts


parts



12/05/2016 10:09:16











3 Yes QUALIFIED 18/03/2020 09:13:06 09/05/2016 12:09:22

302271 LABORATOIRE DESSAIS DE

MONTEREAU LEM

9 CHEMIN DES 4POMMIERS

MONTEREAU SURLE JARD







13/09/2018 13:20:23 LINE LM238 NA NA 21/09/2012 00:00:00

302271 LABORATOIRE DESSAIS DE

MONTEREAU LEM

9 CHEMIN DES 4POMMIERS

MONTEREAU SURLE JARD





13/09/2018 13:20:23 LINES LM127(S2,S3,S4) AND

LM231 (S2)

NA NA 08/03/2013 00:00:00

302403 LELMA ILOT 53-56 LOT 1 TANGER 90090 Morocco SURFACETREATMENTSPECIALISTS



aluminium alloys


aluminium alloys


19/12/2019 16:35:21 RESTRICTED TOPARTS CLASS 3

ONLY

18/06/2014 00:00:00




aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 06/01/2020 15:58:06 15/03/2019 11:07:18












A3 Yes QUALIFIED 19/12/2019 16:38:51 18/06/2014 00:00:00




passivation





28/10/2020 14:05:31 limited to Type 1 byimmersion.

18/06/2014 00:00:00






OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 15/03/2019 16:16:44 25/07/2014 00:00:00










systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 15/03/2019 16:16:44 10/12/2014 00:00:00





systems











11 Yes QUALIFIED 15/03/2019 16:16:43 10/12/2014 00:00:00





systems


systems


systems


15/03/2019 16:16:44 Limitation to Inkprotection with

Varnish

18/05/2018 13:50:16









16 Yes QUALIFIED 15/03/2019 16:16:43 25/07/2014 00:00:00







A3 Yes QUALIFIED 15/03/2019 16:16:42 18/06/2014 00:00:00







parts


parts


15/03/2019 16:16:43 METALLIC PARTS 08/01/2018 10:57:58



02 Nov 2020 10:51

67/81




ess scope










A6 Yes QUALIFIED 08/01/2020 17:29:27 29/06/2017 10:15:15


07 Electrical 07-01 Assembly Electrical bonding ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY

9 ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY


15/03/2019 16:16:43 FOR SURFACEPREPARATION AND

TEMPORARYPROTECTION

ONLY.

10/12/2014 00:00:00



23/09/2020 18:43:48 METHODS SP1,SP3, SP7 AND TP1

ONLY

10/12/2014 00:00:00




DETECTION


DETECTION

12 Yes QUALIFIED 15/03/2019 16:16:42 30/07/2014 00:00:00






302413 LA NITRURATIONMODERNE SA

RUE G GALLER 22-24

LIEGE 4000 Belgium SURFACETREATMENTSPECIALISTS



aluminium alloys



Yes QUALIFIED 14/08/2019 21:30:44 21/10/2014 00:00:00


RUE G GALLER 22-24




aluminium alloys


aluminium alloys

2 80-T-35-2100 Chromic AcidAnodizing

Yes QUALIFIED 14/08/2019 21:45:07 21/10/2014 00:00:00


RUE G GALLER 22-24













14/08/2019 23:25:27 ONLY FORSUBCONTRACTED

ITEMS FORSONACA (ARP

198967) AND ASCO(ARP 138656)

FULLY PAINTEDPARTS ONLY

23/04/2015 00:00:00


RUE G GALLER 22-24





expansion



RUE G GALLER 22-24




agents






Yes QUALIFIED 14/08/2019 16:14:55 27/06/2017 17:45:59


RUE G GALLER 22-24




agents




Yes QUALIFIED 14/08/2019 21:34:37 21/10/2014 00:00:00


RUE G GALLER 22-24




agents




Yes QUALIFIED 14/08/2019 23:51:35 27/06/2017 17:37:36


RUE G GALLER 22-24




agents




Yes QUALIFIED 14/08/2019 23:09:16 27/06/2017 17:42:54


RUE G GALLER 22-24




agents




1 Yes QUALIFIED 14/08/2019 21:50:36 05/11/2015 00:00:00


RUE G GALLER 22-24




passivation





14/08/2019 23:30:21 ONLY FORSUBCONTRACTED

ITEMS FORSONACA (ARP

198967) AND ASCO(ARP 138656)

FULLY PAINTEDPARTS ONLY

23/04/2015 00:00:00


RUE G GALLER 22-24




passivation


Steel


Steel


Steel


14/08/2019 23:37:14 LNM FOLLOWS INCHAPTER 4.3

"QUALITYCONTROL" 4.3.1 -->

4.3.2 IS NOTAPPLICABLE FOR

LNM.

29/10/2012 00:00:00


RUE G GALLER 22-24




passivation




Stählen


Stählen

Yes QUALIFIED 14/08/2019 16:22:12 05/12/2014 00:00:00


RUE G GALLER 22-24




passivation








14/08/2019 23:20:44 EXTENDEDWORKBENCH

ONLY

05/12/2014 00:00:00


RUE G GALLER 22-24






General


General

Yes QUALIFIED 22/08/2019 14:00:34 29/10/2012 00:00:00


RUE G GALLER 22-24





systems


systems


systems


22/08/2019 13:59:25 ONLY FORVARNISH

APPLICATIONDURING MARKINGOVERCOATING ASPER AIPI 08-03-002

15/01/2015 00:00:00


RUE G GALLER 22-24









Yes QUALIFIED 22/08/2019 14:21:46 31/08/2017 14:31:35


RUE G GALLER 22-24









Yes QUALIFIED 22/08/2019 14:23:46 08/09/2017 08:38:17


RUE G GALLER 22-24







A3 Yes QUALIFIED 22/08/2019 14:18:53 29/10/2012 00:00:00


RUE G GALLER 22-24







Yes QUALIFIED 14/08/2019 23:02:51 27/06/2017 17:30:11


RUE G GALLER 22-24





Acid -


Acid -

Yes QUALIFIED 20/08/2020 10:15:44 22/02/2019 13:57:58


RUE G GALLER 22-24







4 Yes QUALIFIED 14/08/2019 22:26:19 DQ-MT13 DQ-MT13 22/01/2013 00:00:00


RUE G GALLER 22-24







RUE G GALLER 22-24



302521 INSTITUT DESOUDUREINDUSTRIE

ROUTE DE DIESEN PORCELETTE 57890 France NDT SPECIALISTS Non DestructiveTesting

Resonance Tap-test AITM6-5003 Essai parTapotement `Tap

test¿

6 AITM6-5003 Essai parTapotement `Tap

test¿


12/09/2019 16:34:29 LIMITED TO A350XWB ANDA330/A340

(SANDWICH AREASCOMPOSITE

PARTS)

15/07/2014 00:00:00



Ultrasonic Throughtransmission

ultrasonic inspectionof CFRP and

sandwich

AITM6-4002 Ultrasonic throughtransmission


7 AITM6-4002 Ultrasonic throughtransmission



09/07/2020 13:53:24 See attached QCS 126769 ;200178 Ultrasonic Throughtransmissioninspection on

A330;NDTqualification for

inspection of ATRaileron pa

Material type:Composite parts

914/42%/G803 TIS.CARBONE

ASNA4132Honeycomb ASN-A35183560

60;Struct;Material:

Structure build upand/or part familyHoneycomb ATR

Horn panels Carbonfibre Hexply 914-42

21/12/2015 00:00:00



02 Nov 2020 10:51

68/81




ess scope










09/07/2020 13:50:05 See QCS Attached 130197;200175;QCS141209;QCS130549;

QCS150489

Title A330/A340Nose Landing GearDoor (on flat an;NDT

qualification forinspection of ATR

aileron pa;Structurebuild-up and/or partfamily: A350 Floor ;:

A350XWB NoseLanding doors parts

made withTherm;QCS150489

Material type:Composite parts

914/42%/G803 TIS.CARBONE

ASNA4132Honeycomb ASN-A35183560

60;Structu;Material:type Carbon fibreHexply 914-42%-

G803(ASNA4132)Glassfabric Hexply 914-45%-759Adhesivef;ABS5833A14A2G

Carbon fibrereinforced Poly Ether

Ketone (PEEK)according to

AIMS05-09-004;Structure;Composite

parts TISSU 855237% AGP280/C 1270

TISSU CARBONEABS5003

HoneycombABS5035A7-800 -

Structu;

21/12/2015 00:00:00





holes in composites








06/03/2019 14:36:23 QCS 140978 QCS 140978 Structure build-upand/or part family:

A350 - Floo

ABS5833A14A2GCarbon fibre

reinforced Poly EtherEther Ketone (PEEK)

according toAIMS05-09-004;

Str

01/04/2015 00:00:00

302858 THERMI GARONNE 59 ROUTEFROUZINS

ROQUES SURGARONNE




general


General

2 NA Yes QUALIFIED 02/04/2020 14:30:21 06/01/2016 00:00:00


ROQUES SURGARONNE




alloys


alloys


alloys


07/07/2020 14:52:15 Qualification listDI127 at the latest

issue

06/01/2016 00:00:00


ROQUES SURGARONNE








issue

07/04/2014 00:00:00


ROQUES SURGARONNE








issue

07/04/2014 00:00:00

303032 METALIMPROVEMENTCOMPANY LLC

CURTISS WRIGTHSURFAC

CL INGENIERORAFAEL RUBIO

ELOA 6





expansion


of metal parts


of metal parts


of metal parts

A3 Yes QUALIFIED 05/03/2020 10:37:00 20/11/2014 00:00:00

303032 METALIMPROVEMENTCOMPANY LLC

CURTISS WRIGTHSURFAC

CL INGENIERORAFAEL RUBIO

ELOA 6





expansion


of metal parts

I+D-P-006 Shot peening F1 I+D-P-006 Shot peening F1 Yes QUALIFIED 14/05/2019 13:19:42 09/05/2013 00:00:00

303101 METRASUR S.A.S ZI DE L AIGUILLE FIGEAC 46100 France SURFACETREATMENTSPECIALISTS




expansion








de titane


14/05/2019 13:20:43 RESTRICTED TOSTAINLESS STEEL,

NICKEL ALLOYSAND TITANIUM

ETCHINGAUTHORISED ONPARTS CLASS 2S

AND 3 ONLYGRINDING

PERFOMED BY EPRECTIF

(L'EMPRUNT, 19120NONARDS) AND CBRECTIFICATION (5

CHEMINPEYRANDRIEU,

31780CASTELGINEST)NO GRINDING OF

TITANIUM

17/12/2015 00:00:00










14/05/2019 13:20:44 LIMITED TO NONFATIGUE CRITICAL

PARTS.RESTRICTED TO

COATING WC-17-CoTYPE 1 AS

DEFINED IN THEAIPS02-03-001. ONEBOOTH QUALIFIED

IDENTIFIED ASCABINE N°1.INCLUDINGCLEANINGBLASTINGSPRAYING

GRINDING ANDSTRIPPING. ONE

STRIPPINGALLOWED

(SOLUTION #1 ASDEFINED IN AMS

2448).

17/12/2015 00:00:00




agents




14/05/2019 13:20:44 RESTRICTED TOTANKS N°3 AND 6

GRINDINGOPERATION

PERFOMED BY EPRECTIF

(L'EMPRUNT, 19120NONARDS) AND CBRECTIFICATION (5

CHEMINPEYRANDRIEU,

31780CASTELGINEST)

08/09/2014 00:00:00




agents


I+D-P-110 Hard chromiumplating

B3 NA Yes QUALIFIED WITHLIMITATIONS

14/05/2019 13:20:44 Only for materialprocessing PH 13-8Mo in the bath nº3(Type II) and bath

nº6(Type I).

29/07/2016 12:35:14




agents


ADET0167 Cadmiage au tampondes aciers





agents


AIPS02-04-010 Pad cadmium platingof steels





passivation


Steel


Steel


Steel


14/05/2019 13:20:43 No pickling operationbefore passivation

30/04/2014 00:00:00







4 Yes QUALIFIED 14/05/2019 13:20:43 08/09/2014 00:00:00

303118 ALLOYPROCESSING

1900 WESTWALNUTS STREET




aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 27/10/2016 16:12:22 14/04/2014 00:00:00






aluminium alloys


aluminium alloys


ALUMINIUM


27/10/2016 16:12:24 PARTS CLASS 3ONLY

11/02/2015 00:00:00









Aluminum Alloys

AIPI02-01-003 Tartaric SulphuricAnodising of



A3 Yes QUALIFIED 27/10/2016 16:12:21 15/09/2015 00:00:00














A3 Yes QUALIFIED 27/10/2016 16:12:24 02/09/2015 00:00:00



02 Nov 2020 10:51

69/81




ess scope








expansion




17/05/2018 15:14:44 DRY BLASTING OFTI & AL

COMPONENTS (NOHYDRAULIC

TUBES) IN BLDG. 2ONLY; LIMITED TO

EXTENDEDWORKBENCH

ACTIVITIES (SEEAP2190.0 FORDEFINITION).

29/03/2016 14:01:34







expansion


27/10/2016 16:12:24 DRY BLASTING OFTI & AL

COMPONENTS (NOHYDRAULIC

TUBES) IN BLDG 2ONLY; LIMITED TO

EXTENDEDWORKBENCH

ACTIVITIES (SEEAP2190.0 FORDEFINITION).

29/03/2016 14:22:59







expansion


of metal parts

80-T-35-0205 Shot Peening 80-T-35-0205 Shot Peening Yes QUALIFIED WITHLIMITATIONS

05/09/2018 16:49:02 AUTOMATICCLASSIC SHOT

PEENING OF TI &AL COMPONENTSIN BLDG. 2 ONLY;

LIMITED TOEXTENDED


AP2190.0 FORDEFINITION).

29/03/2016 14:33:47







expansion


of metal parts





9 Yes QUALIFIED 13/03/2018 15:36:37 13/09/2016 21:54:07







expansion


of metal parts


REQUIREMENTS


REQUIREMENTS

4 Yes QUALIFIED 13/03/2018 15:36:38 07/11/2016 16:29:48







expansion


of metal parts


of metal parts


of metal parts


27/10/2016 16:12:24 AUTOMATICCLASSIC SHOT

PEENING OF TI &AL COMPONENTSIN BLDG. 2 ONLY;

LIMITED TOEXTENDED



29/03/2016 14:48:56






passivation





27/10/2016 16:12:21 LOCALAPPLICATION

PROCESS ONLY

25/09/2015 00:00:00






passivation







27/10/2016 16:12:22 METALLIC PARTS 05/01/2016 00:00:00






passivation





27/10/2016 16:12:24 LOCALAPPLOCATION

25/09/2015 00:00:00







AIPS03-03-001 Rework of scratchesin Aluminium alloyson external surfaces

5 AIPI03-03-001 Rework of scratchesin Aluminium alloyson external surfaces

2 Yes QUALIFIED 27/10/2016 16:12:25 14/04/2014 00:00:00








OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 27/10/2016 16:12:22 14/04/2014 00:00:00







y Paint



Yes QUALIFIED 02/03/2017 15:38:25 12/09/2016 17:52:37








General


General


27/10/2016 16:12:22 METALLIC PARTS 15/09/2015 00:00:00







systems


Abrasion-Resistant


Abrasion-Resistant

Yes QUALIFIED 27/10/2016 16:12:22 06/11/2015 00:00:00












27/10/2016 16:12:21 METALLIC PARTS 15/09/2015 00:00:00












27/10/2016 16:12:22 METALLIC PARTS 15/09/2015 00:00:00











16 Yes QUALIFIED 27/10/2016 16:12:22 14/04/2014 00:00:00










27/10/2016 16:12:25 METALLIC PARTS 05/01/2016 00:00:00









parts


parts


27/10/2016 16:12:25 Metallic parts 11/02/2015 00:00:00





Limited Approval forMasking of EB areas

of Metallic Parts,ONLY- in accordancewith the AIPS 07-01-006/AIPI 07-01-006,The Processor to beperforming /providing

the masking andprocessing for these

requirements thatcurrently require thelimited approval are

as follows:AIPS 07-01-006


Parts4.1.2.1 Preparation

of the contact surfacefor electrical bonding4.1.2.1.1 Dimensions

of area masked orstripped

4.1.2.1.1.1 Circularcontact surface4.1.2.1.1.2 Notcircular contact

surface4.1.2.1.2 Preparationof contact surfaces4.1.2.1.2.1 Maskingthe contact surface

prior to application ofinsulating surface

treatments.AIPI 07-01-006


Parts1.2.2 Indication ondrawings Drawing

identification2.3.2 Handling of

parts2.3.3 Incoming parts

condition2.3.4 Personnel

instructions3.1 PREPARATION

OF THE WORK3.1.1.1 General

information3.1.1.4 Surface

Preparation Process:Surface preparation -SP7, Metallic parts

with protected zone –Masking. Information

15/11/2016 21:27:49



02 Nov 2020 10:51

70/81




ess scope









4 Yes QUALIFIED 12/04/2019 13:50:44 21/04/2014 00:00:00









12/04/2019 13:49:20 APPLICATION INBLDG. 1 ONLY;

LIMITED TOEXTENDED



11/02/2015 00:00:00












3 Yes QUALIFIED 12/04/2019 13:45:11 15/09/2015 00:00:00






DETECTION


DETECTION

12 Yes QUALIFIED 27/10/2016 16:12:23 14/02/2014 00:00:00







12 Yes QUALIFIED 27/10/2016 16:12:26 14/02/2014 00:00:00





ALLOYS


ALLOYS


ALLOYS

7 Yes QUALIFIED 27/10/2016 16:12:23 21/04/2014 00:00:00





303154 REDA 10 RUE BERNARDPALISSY E




agents



7 NO_AIRBUS_PI Yes AUTHORISATIONTO PROCEED

2020-12-31 05/10/2020 13:58:57 12/05/2015 00:00:00

303197 ASHTON ANDMOORE LIMITED

12 SMITH STREET BIRMINGHAM B19 3EX United Kingdom SURFACETREATMENTSPECIALISTS



aluminium alloys


ALUMINIUM


ALUMINIUM

12 Yes QUALIFIED 14/11/2019 11:14:59 14/12/2009 00:00:00





aluminium alloys


ALUMINIUM


ALUMINIUM

4 Yes QUALIFIED 14/11/2019 11:14:59 14/12/2009 00:00:00














14/11/2019 11:14:59 ALUMINUM ALLOY2024 & 7075 PARTSWHICH HAS TO BE

SUBSQUENTLYPAINTED OR ORWITH CHROMIC

SEAL POST-TREATMENT

18/06/2015 00:00:00





passivation





14/11/2019 11:14:58 Immersion Only 07/11/2018 13:11:24





passivation



3 Yes QUALIFIED 14/11/2019 11:14:58 14/12/2009 00:00:00







OR EXTERNALSURFACE



OR EXTERNALSURFACE

26 Yes QUALIFIED 14/11/2019 11:14:58 14/12/2009 00:00:00











4 Yes QUALIFIED 14/11/2019 11:14:56 14/12/2009 00:00:00






systems


RESISTANT PAINT


RESISTANT PAINT

7 Yes QUALIFIED 14/11/2019 11:14:57 14/12/2009 00:00:00






systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 14/11/2019 11:14:58 14/12/2009 00:00:00






systems







18 Yes QUALIFIED 14/11/2019 11:14:58 14/12/2009 00:00:00






systems











11 Yes QUALIFIED 14/11/2019 11:14:57 14/12/2009 00:00:00






systems


RESISTANT PAINT


RESISTANT PAINT

8 Yes QUALIFIED 14/11/2019 11:14:58 14/12/2009 00:00:00






systems


systems


systems


14/11/2019 11:14:58 Varnish applicationfor ink markingprotection only

27/03/2017 11:19:52





APPLICATION OFHIGH


PAINT TO STEELS



PAINT TO STEELS



PAINT TO STEELS

3 Yes QUALIFIED 14/11/2019 11:14:56 14/12/2009 00:00:00










16 Yes QUALIFIED 14/11/2019 11:14:57 14/12/2009 00:00:00









14/11/2019 11:14:57 METALLIC PARTS 18/06/2015 00:00:00





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 31/03/2020 14:06:08 18/06/2015 00:00:00











3 Yes QUALIFIED 27/03/2020 15:06:51 18/06/2015 00:00:00







Detection






DETECTION








14/11/2019 11:14:57 Penetrant type 1.A.2on line 4 and type1.D.2 on line 3"

24/01/2017 17:34:33




ALLOYS


ALLOYS


ALLOYS


14/11/2019 11:14:59 Pre-penetrantetching using as part

of an AIPS 02-01-003 qualified tartaric

sulphuric acidanodising facility and

run in accordancewith AIPI 02-01-003

08/12/2016 13:27:41



02 Nov 2020 10:51

71/81




ess scope


304139 TESTIA GMBH CORNELIUS-EDZARD-STR. 15

BREMEN 28199 Germany NDT SPECIALISTSGP-3-213B

INDUSTRIALSERVICES SAT-1-3

SATAIR TOOLS









3 Yes QUALIFIED 13/09/2018 13:24:19 25/03/2016 13:31:04




SATAIR TOOLS



materials







5 Yes QUALIFIED 11/12/2019 13:35:17 N/A N/A 25/03/2016 13:40:43




SATAIR TOOLS



detection







3 Yes QUALIFIED 30/09/2019 09:08:21 25/03/2016 13:33:07




SATAIR TOOLS







1 Yes QUALIFIED 13/09/2018 13:24:19 N/A N/A 25/03/2016 13:38:13




SATAIR TOOLS



Computedtomography CT withX- and gamma rays

AITM6-7006 Computedtomography (CT)

with X-rays (includingplanar X-raytomography)

6 AITM6-7006 Computedtomography (CT)



LIMITATIONS

2020-12-31 01/10/2020 14:59:20 QCS 180685: issue 2Material: Inc718,

Inconel 628, Invarand Hastelloy

produced by AdditiveManufacturing (AM)Structure build up,part family: Parts

made of usingAdditive

Manufacturing (AM).Thickness range: 0-

20 mm (Diondo MicroCT System (300 kV) /Testia Ottobrunn); 0-

40 mm (Macro CTSystem (600 kV) /Fraunhofer EZRT

Fürth)Smallest defect sizes

= 500 µm in alldimensions

A320 Neo O-ring D302 22025 / 2026; -A330 Neo O-ring G

302 10010/10011/10021/10022;- A320 Upper bleedD 361 15118/10119

QCS 180685 issue 3:Material: Inc718

produced by AdditiveManufacturing (AM)Structure build up,

part family:- A320 Neo O-ring D

302 22025 / 2026- A330 Neo O-ring G

302 10010/10011/10021/10022- A320 Upper bleedD 361 15118/10119

- A350 O-RingV30210212

QCS 171087 issue 3:Material: Polymers(PLA, PET, PEEK)and metals (Al-, Ti-

and Fe-alloys),produced by AdditiveManufacturing (AM).Structure build up,part family: Parts

(Functional Class 2.3and 3) made of using

AdditiveManufacturing (AM).Smallest defect size

of 500 µm (solidinclusions 300 µm) in

all dimensions aredetectable.

Thickness range: 0-40mm

QCS 171087 issue 4:adjustment valid for

the qualificationmentioned in issue 1

and issue 3Material: Titaniumtest specimens,

produced by AdditiveManufacturing (AM).Structure build up,

part family:Mechanical test

specimens (Tensile,Compression,

Fracture toughness,bearing stress,

Compression proofstress & Shear stress

specimens)Acceptance criteria:

QL1 - Smallestdefect size of 200 µm(solid inclusions 150µm) in all dimensions

are detectable.Thickness range: 0-40mm in Machined

condition

QCS 180685 issue 4:Material: Inc718

produced by AdditiveManufacturing (AM)Structure build up,

part family: A320 NISO-Rings E302-

32001-200/202/204/206/208

Facilities:Testia GmbH, Airbus

Allee 1, 28199Bremen, Germany

(headquarter)Testia GmbH, Willy-Messerschmitt-Str. 1,

82024Taufkirchen/Ottobrun

n

QCS 171087 issue 5:adjustment valid for

the qualificationmentioned in issue 4

Material: Titaniumtest specimens,

produced by AdditiveManufacturing (AM).Structure build up,

part family:Mechanical test

specimens (Tensile,Compression,

Fracture toughness,bearing stress,

Compression proofstress & Shear stress

specimens).Acceptance criteria:

QL1 - Smallestdefect size of 200 µm(solid inclusions 150µm) in all dimensions

are detectable.Thickness range: 0-40mm in as-built andmachined condition.

Facilities:Testia GmbH, Airbus

Allee 1, 28199Bremen, Germany

(Headquarter)Testia GmbH, Willy-Messerschmitt-Str. 1,82024 Taufkirchen,

Germany

171087 ;180685 ComputedTomography

inspection of partsmade of

po;ComputedTomography (CT) onNi-based alloys using

Material: Polymers(PLA, PET, PEEK)and metals (Al-, Ti-

and Fe-alloys),produced by Additive

Manufa;Material:Inc718, Inconel 628,Invar and Hastelloy

produced by AdditiveManufacturing (AM);

18/12/2017 17:08:14




SATAIR TOOLS




techniques



array»



array»


22/10/2019 09:09:34 see QCS160083 QCS160083 NDT inspection iaw.AITM6-4010 ofcomposite parts

Inspection of fibrecomposites;

by ultrasonic phasedarray techniqueMaterial: - CFRPM21E/IMA, 134

19/01/2017 14:44:37



02 Nov 2020 10:51

72/81




ess scope





SATAIR TOOLS


Ultrasonic Thicknessmeasurement of fibre

composites by UTpulse-echo technique

AITM6-4014 Mesure de lépaisseur des


ultrasonore

5 AITM6-4014 Mesure de lépaisseur des


ultrasonore

5 Yes QUALIFIED 13/09/2018 13:24:19 25/03/2016 13:28:57




SATAIR TOOLS






ultrasonore



ultrasonore

3 Yes QUALIFIED 13/09/2018 13:24:19 25/03/2016 13:26:12




SATAIR TOOLS








30/09/2019 10:55:28 NDI method ManualUltrasonic Inspection

of monolithiccomposite on plane-parallel, ramps, andradius areas for a

thickness range from2mm to 40mm usingmanual Ultrasonic

Pulse Echotechnique.

Equipment Testiaequipment only -

OmniScan MX2 fromOlympus (only insingle transducerprobe modus (UT-

Modus)) and -Epoch600 from

Olympus. MaterialCFRP Structure buildup, part family plane-parallel, ramps and

radii Thickness range2mm to 40mm

Facility Testia GmbH,Airbus-Allee 1, 28199

Bremen, Germany

FR;QCS150657;QCS150657

FR;ManualUltrasonic Inspection

of monolithiccomposi;QCS150657

;Manual UltrasonicInspection of

monolithic compositeon plane-

parallel,ramps, andradius areas for a;

14/01/2016 00:00:00

304207 SOLARATMOSPHERES OFWESTERN PA INC

30 INDUSTRIALROAD

HERMITAGE 16148 USA HEAT TREATMENTSPECIALISTS



general


General


304207 SOLARATMOSPHERES OFWESTERN PA INC

30 INDUSTRIALROAD

HERMITAGE 16148 USA HEAT TREATMENTSPECIALISTS



alloys


alloys


alloys


19/09/2019 13:55:03 STRESS RELIEVEONLY

06/03/2014 00:00:00

304761 CHATAL 29, RUE DETABAGO

SAINT-NICOLAS-DE-REDON





fasteners


fasteners


fasteners

A3 Yes QUALIFIED 23/12/2016 13:42:29 02/08/2016 14:06:33






aluminium alloys


ALUMINIUM


ALUMINIUM


LIMITATIONS

2020-11-30 25/06/2020 09:22:16 Limitation to themethod 1,6,7 for

2000 and 6000 alloys

25/06/2020 09:21:50






aluminium alloys


aluminium alloys







aluminium alloys



H AIPI02-01-002 Sulphuric acidanodising of

aluminium alloys

2 Yes QUALIFIED 28/10/2016 10:55:02 01/04/2015 00:00:00






aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 28/10/2016 10:55:02 01/04/2015 00:00:00















28/10/2016 10:55:02 NO POSTTREATMENT

01/04/2015 00:00:00







expansion







agents









agents




1 Yes QUALIFIED 28/10/2016 10:55:03 18/12/2015 00:00:00






passivation





LIMITATIONS

2020-11-30 09/06/2020 18:51:49 limitation to themethod 8

09/06/2020 18:50:12






passivation





16/11/2018 14:34:03 TYPE I BYIMMERSION

ALODINE 1200, ANDTYPE I BY LOCAL

APPLICATIONALODINE PEN 1132.

01/04/2015 00:00:00






passivation


Steel


Steel


Steel


25/07/2018 16:12:49 limited to machinedparts which not

require etching asper AIPS/AIPI09-02-

006.

29/05/2015 00:00:00






passivation




austenitiques


18/03/2019 10:41:30 NO INCONEL 01/04/2015 00:00:00






passivation




30/11/2018 15:00:59 STEEL WITHRM<1300MPa

10/10/2016 14:26:53






passivation

Phosphating of steel AIPS02-05-004 Phosphating of Steel 2 NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

30/11/2018 15:15:29 Phosphating TYPE MAND L / STEEL

WITH RM<1300MPa

01/04/2015 00:00:00







AIPS03-03-001 Rework of scratchesin Aluminium alloyson external surfaces

5 AIPI03-03-001 Rework of scratchesin Aluminium alloyson external surfaces


19/11/2018 10:18:32 Applied only withoutmaterial extraction

from the part.Only on Type 1 and

only with STICKAlodine.

15/11/2018 16:47:25








OR EXTERNALSURFACE



OR EXTERNALSURFACE


LIMITATIONS

2020-11-30 09/06/2020 18:57:23 limitation to themethod 1,4,7 and 8

09/06/2020 18:56:55








PAINTS



PAINTS


LIMITATIONS

2020-11-30 10/06/2020 09:40:27 limitation to themethod 4

10/06/2020 09:38:59







J AIPI05-02-009 Application ofstructural paints


08/10/2018 10:41:25 ON METALLICPARTS ONLY

01/04/2015 00:00:00







Paint


Paint


Paint

A3 Yes QUALIFIED 05/03/2018 10:47:54 12/02/2018 16:48:38







systems


systems


systems

A2 Yes QUALIFIED 27/03/2018 11:46:24 01/04/2015 00:00:00












2020-11-30 09/06/2020 19:00:29 09/06/2020 19:00:06











10/11/2015 00:00:00



02 Nov 2020 10:51

73/81




ess scope







Removal of paintfrom furnishing andcomponents used in

aircraft interiors

AIPS05-02-007 Removal of paintfrom furnishing andcomponents used in

aircraft interiors

2 AIPI05-02-007 Removal of paintfrom furnishing andcomponents used in

aircraft interiors


03/05/2018 13:18:35 Removal of paint onULTEM parts only.

28/02/2018 14:45:11









parts


parts


19/11/2018 10:48:35 rework only withalodine stick.

Only with part withoutremoval material

16/11/2018 10:43:55





05-04 Filler Application of Filler AIPS05-04-006 Application of Filler 3 AIPI05-04-006 Application of Filler A4 Yes QUALIFIED 05/03/2018 10:52:10 12/02/2018 16:52:47












19/11/2019 11:17:12 SURFACEPROTECTION ON

FASTENERS ONLY

21/10/2019 11:47:03




07 Electrical 07-01 Assembly Electrical bonding ADET0114 Procedes demetallisation

C AIPI07-01-006 Electrical Bonding B1 Yes QUALIFIED WITHLIMITATIONS

28/10/2016 10:55:02 TYPE 1,2 AND 3 01/04/2015 00:00:00





28/10/2016 10:55:03 TYPE 1,2 AND 3 01/04/2015 00:00:00








3 Yes QUALIFIED 17/09/2020 17:04:39 21/12/2015 00:00:00






application


application


application


27/03/2018 11:51:30 COMPONENTSPAINTED WITH

BASIC PRIMER ORANTISTATIC PAINTWITHIN OVERCOAT

TIME

11/10/2017 12:15:49






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 17/09/2020 17:08:15 01/04/2015 00:00:00












3 Yes QUALIFIED 17/09/2020 17:07:18 05/04/2017 14:31:44






materials







5 Yes QUALIFIED 23/12/2016 13:39:26 02/08/2016 14:10:46






ETCH INSPECTION


ETCH INSPECTION


ETCH INSPECTION

5-1 Yes QUALIFIED 25/11/2019 13:57:22 25/11/2019 13:56:35






ETCH INSPECTION


inspection


inspection

2 Yes QUALIFIED 29/09/2020 11:43:50 19/11/2019 11:26:57








Detection


Detection

3-2 Yes QUALIFIED 17/01/2020 13:27:45 200.00 130.00 90.00 17/01/2020 13:27:04









4 Yes QUALIFIED 28/10/2016 10:55:04 06/10/2015 00:00:00





Measurement Measure ResistanceOf Electrical Bonding

Points

AITM6-9008 MétallisationÉlectrique :Mesure



4 AITM6-9008 MétallisationÉlectrique :Mesure




28/10/2016 10:55:04 METHOD M1 ANDM2

NA NA 01/04/2015 00:00:00






DETECTION


DETECTION


19/11/2019 11:23:59 Type I, MethodA, S2,Form a. Etching notcovered for Ti and

Stainless steel

19/11/2019 11:22:47







12 Yes QUALIFIED 28/10/2016 10:55:04 21/12/2015 00:00:00

305706 CHASSINTPEINTURE

PECHIGOU BEDUER 46100 France SURFACETREATMENTSPECIALISTS




systems


systems


systems


LIMITATIONS

2020-12-31 02/10/2020 15:21:25 limited to clear coatapplication after ink

marking

02/10/2020 15:19:48









LIMITATIONS

2020-12-31 02/10/2020 15:28:31 LIMITED TOMETALLIC PARTS

12/12/2014 00:00:00








parts


parts


LIMITATIONS

2020-12-31 02/10/2020 15:25:14 limited to paint layer(rework on substrate

not available)

02/10/2020 15:24:04

305901 BIAM - AVICBEIJING INSTITUTEOF AERONAUTICAL

MATERIALS

HUANSHANCUN BEIJING 100095 China NDT SPECIALISTSAFM-003-4 TEST

LAB




12 Yes QUALIFIED 13/09/2018 13:25:10 17/06/2016 15:48:06

305909 CAMETOIDTECHNOLOGIES

INC

150 COLONIALROAD

MANCHESTER 6042 USA SURFACETREATMENTSPECIALISTS


02-03 Deposition Ion VapourDeposition IVD of

Aluminium

AIPS02-03-006 Ion VapourDeposition (IVD) of

Aluminium

2 AIPI02-03-006 Ion VapourDeposition (IVD) of

Aluminium


11/10/2019 13:00:57 RESTRICTED TOCLASS 3 IVDALUMINIUM

COATINGS, ASDEFINED IN

SECTION 1.2 OFTHE

CORRESPONDINGAIPS. INCLUDING

CHEMICALCONVERSION

COATING.

09/09/2015 00:00:00

306256 FREYSSINET AEROCOATING

11 PARCDACTIVITE DE

MASSIES

COUFOULEUX 81800 France SURFACETREATMENTSPECIALISTS



aluminium alloys


aluminium alloys


03/12/2019 13:35:54 NOT FORADHESIVE

BONDING PRE-TREATMENT

13/10/2014 00:00:00


11 PARCDACTIVITE DE

MASSIES




passivation





03/12/2019 13:42:03 Only ImmersionAlodine 1200 onAluminium 2000

material.

05/08/2015 00:00:00


11 PARCDACTIVITE DE

MASSIES






METALL


14/11/2019 11:16:28 TYPE 1 AND 2 05/08/2015 00:00:00


11 PARCDACTIVITE DE

MASSIES









05/08/2015 00:00:00

306508 ENSIA EXPERT SL AV RITA LEVIMONTALCINI 29

GETAFE 28906 Spain NDT SPECIALISTSGP-3-213B

INDUSTRIALSERVICES








25/10/2018 09:58:20 Flat laminate partswith material

ABS5377C0300 andthickness from 6 to21 mm (reference

standard A-350-LP-002)

QCS171129 Airbus flat partsmade of CFRP

monolithic laminate

Airbus flat partsmade of CFRP

monolithic laminatewith a thickness

range of 2 mm to 21mm.

26/06/2018 11:23:35

306750 KURZIUSAEROSPACE GMBH

AUF DEM FANGE1A

ERWITTE 59597 Germany SURFACETREATMENTSPECIALISTS



aluminium alloys


Sealing


Sealing

Yes QUALIFIED 04/03/2020 10:16:05 24/07/2017 11:33:36


AUF DEM FANGE1A




aluminium alloys



Yes QUALIFIED 04/03/2020 10:16:05 24/07/2017 11:38:49


AUF DEM FANGE1A




aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 04/03/2020 09:59:08 24/07/2017 11:26:37



02 Nov 2020 10:51

74/81




ess scope



AUF DEM FANGE1A












A3 Yes QUALIFIED 04/03/2020 09:59:13 14/01/2016 00:00:00


AUF DEM FANGE1A





expansion



Yes QUALIFIED 04/03/2020 10:16:03 03/11/2014 00:00:00


AUF DEM FANGE1A





expansion



AUF DEM FANGE1A




agents




Yes QUALIFIED 04/03/2020 09:59:12 10/10/2019 16:09:04


AUF DEM FANGE1A




passivation




Yes QUALIFIED 04/03/2020 09:59:12 03/11/2014 00:00:00


AUF DEM FANGE1A




passivation




2 Yes QUALIFIED 04/03/2020 09:59:12 03/11/2014 00:00:00


AUF DEM FANGE1A




passivation


Steel


Steel


Steel


04/03/2020 09:59:11 on parts machinedon all surfaces and

without pickling(AIPI09-02-006 not

qualified)

20/02/2019 11:16:56


AUF DEM FANGE1A




passivation





Yes QUALIFIED 04/03/2020 10:16:04 07/11/2019 16:04:22


AUF DEM FANGE1A




passivation





Yes QUALIFIED 04/03/2020 10:16:04 07/11/2019 16:04:27


AUF DEM FANGE1A




passivation




Stählen


Stählen

Yes QUALIFIED 04/03/2020 09:59:10 24/07/2017 11:49:28


AUF DEM FANGE1A





base d'époxy)


base d'époxy)



08/10/2015 00:00:00


AUF DEM FANGE1A





Chromate - free



AUF DEM FANGE1A





y Paint



Yes QUALIFIED 04/03/2020 09:59:09 22/03/2018 16:32:15


AUF DEM FANGE1A






General


General


04/03/2020 09:59:09 METALLIC PARTS 03/11/2014 00:00:00


AUF DEM FANGE1A





Paint




04/03/2020 09:59:10 on metallic partswithout filler.

04/04/2017 10:47:19


AUF DEM FANGE1A





Paint


Paint


Paint

A3 Yes QUALIFIED 04/03/2020 09:59:09 30/08/2016 09:51:31


AUF DEM FANGE1A





systems





AUF DEM FANGE1A





systems

80-T-35-9127 Aircraft Exterior PaintSystem Application


04/03/2020 10:16:07 ON METALLIC ANDCOMPOSITE

DETAIL PARTSONLY.

20/01/2017 09:10:37


AUF DEM FANGE1A





systems


systems


systems

A2 Yes QUALIFIED 04/03/2020 09:59:10 08/10/2015 00:00:00


AUF DEM FANGE1A










04/03/2020 09:59:16 METALIC ANDCOMPOSITES

PARTS.

03/11/2014 00:00:00


AUF DEM FANGE1A











08/10/2015 00:00:00


AUF DEM FANGE1A










04/03/2020 09:59:16 ON METALLIC ANDCOMPOSITES

PARTS.

08/10/2015 00:00:00


AUF DEM FANGE1A











08/10/2015 00:00:00


AUF DEM FANGE1A





80-T-35-9030 Application of Fillers NA Yes QUALIFIED WITHLIMITATIONS

15/06/2020 10:20:33 on metallic and non-metallic parts with

filling products 80-T-35-9030 data sheet 3

19/12/2017 10:36:17


AUF DEM FANGE1A








04/03/2020 09:59:15 METALIC PARTS 03/11/2014 00:00:00


AUF DEM FANGE1A




Removal of paintfrom furnishing andcomponents used in

aircraft interiors

AIPS05-02-007 Removal of paintfrom furnishing andcomponents used in

aircraft interiors

2 AIPI05-02-007 Removal of paintfrom furnishing andcomponents used in

aircraft interiors



29/05/2015 00:00:00


AUF DEM FANGE1A






80-T-35-9021 Preservation of CutEdges

80-T-35-9021 Preservation of CutEdges


04/03/2020 09:59:17 METALIC PARTS 03/11/2014 00:00:00


AUF DEM FANGE1A







parts


parts


04/03/2020 09:59:17 METALIC PARTS 03/11/2014 00:00:00


AUF DEM FANGE1A





Acid -


Acid -


04/03/2020 10:16:07 with limitations toMethods I and II.

07/11/2019 16:04:28


AUF DEM FANGE1A




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 04/03/2020 10:16:06 FR;GE FR;GE ; 14/06/2016 13:53:01


AUF DEM FANGE1A












AUF DEM FANGE1A



306790 APPLUS ILLESCAS CL HISTORIANAVES 7 Y 8

ILLESCAS 45200 Spain NDT SPECIALISTSAFM-003-4 TEST

LAB






10/09/2020 14:11:53 NDT method andNDT technique:

Automatic reflectorplate accordingAITM6-4021.

· Material type:IPS05-01-002-03,IPS05-01-004-03,IPS05-01-001-06,IPS10-01-006-02,IPS05-04-00X-0X

and IPS05-04-100-01(details in QTP) and

Carbon fiber tapeHexply

M21E/34%/UD268/IMA-12K.

· Structurebuilds up: flat orslightly curved

monolithic laminate.Thickness range, as

per QCS.

QCS130663;QCS161397

inspection oflaminated structures;Extension to Fabric

Material

Material type: carbonfiber tape Hexply

M21E/34%/UD268/IMA-12K.;

-Structure build up:Flat or slight;Materialtype: IPS05-01-002-

03, IPS05-01-004-03,IPS05-01-001-06,IPS10-01-006-02,;IPS05-04-00X-0X

05/11/2014 00:00:00



02 Nov 2020 10:51

75/81




ess scope




LAB








12/07/2019 12:22:09 As per QCS. 161394 APPlus Illescastechnical qualification

AITM6-4005

Material type: IPS05-01-002-03, IPS05-01-004-03, IPS05-01-001-06, IPS10-01-006-02, IPS05-

04-00X-0X a

12/07/2019 12:11:35



LAB




holes in composites








10/09/2020 14:11:53 NDT method andNDT technique:

Ultrasonic inspectionof areas around

fastener and rivetholes in compositesby manual ultrasonicpulse-echo accordingAITM6-4022.Materialtype: IPS05-01-001-

06 (details inQTP),Structurebuilds up: flat

monolithic laminatewith drill holes.Facility: APPlus

Illescas (Autovía A-42 Km. 33 Polígono

Industrial LasCárcavas II. Calle 8.Naves 7 y 8 45200Illescas – Toledo –Spain).Thickness

range: 1 to 10 mm.

180564 180564 Material type: IPS05-01-001-06 (details in

QTP), Structurebuilds up: flat

monolithic laminatewith

04/11/2019 12:37:22


FUNG GMBHAUGSBURG

BRANCH

BUERGERMEISTER-WEGELE-STR. 12

AUGSBURG 86167 Germany NDT SPECIALISTSAFM-003-4 TEST

LAB




techniques



array»



array»


13/09/2018 13:20:23 NDI METHOD:MUPA, MUPE

MATERIAL TYPE:M21E/194-IMA,

RTM6/ G0926-E01PART FAMILY: A350

PAX DOORSOUTER SKIN,

INNER MODULE,EDGE MEMBER

THICKNESSRANGE: 2.0

MM…15.0 MM.RADIUS

CURVATURE: 4.0MM…8.0 MM.

QCS151607 ANDQCS15

QCS151607 ANDQCS151608

09/12/2015 00:00:00


FUNG GMBHAUGSBURG

BRANCH

BUERGERMEISTER-WEGELE-STR. 12

AUGSBURG 86167 Germany NDT SPECIALISTSAFM-003-4 TEST

LAB








13/09/2018 13:20:23 NDI METHOD:MUPA, MUPE

MATERIAL TYPE:M21E/194-IMA,

RTM6/ G0926-E01PART FAMILY: A350

PAX DOORSOUTER SKIN,

INNER MODULE,EDGE MEMBER

THICKNESSRANGE: 2.0

MM…15.0 MM.RADIUS

CURVATURE: 4.0MM…8.0 MM.

QCS151607 ANDQCS15

QCS151607 ANDQCS151608

09/12/2015 00:00:00


FUNG GMBHFRIEDBERG

BRANCH

HOCHGRASWEG 52 FRIEDBERG 86316 Germany NDT SPECIALISTS Non DestructiveTesting






13/09/2018 13:20:23 ANLAGE 1 & 2 21/12/2015 00:00:00


FUNG GMBHFRIEDBERG

BRANCH

HOCHGRASWEG 52 FRIEDBERG 86316 Germany NDT SPECIALISTS Non DestructiveTesting




13/09/2018 13:20:23 IA3A & ID4A -ANLAGE 1 & 2 -LIMITATION ONETCHING : NOT

ABLE.

21/12/2015 00:00:00

307675 JAMES FISHERNDT

UNIT 44 DRIVE DFIRST AVENUE

DEESIDE CH5 2NU United Kingdom NDT SPECIALISTS Non DestructiveTesting




7 ABP6-5346 TESTING BYRADIOGRAPHY

5 Yes QUALIFIED 13/09/2018 13:20:23 27/03/2015 00:00:00











04/09/2020 09:43:26 To include inspectionof parts made by


Laser Powder BedFusion limited to

parts and equipmentas stated in

QCS190928, Issue 2& QCS200164, Issue

2

190928;200164 190928;200164 Material TI6V A320End Caps (R573-

40405-200/201 andR573-40406-

200/201) up to24mm;TI6V made by

the AdditiveManufacturing ;

Part Family Program:A350 KBALS Clips:;V533-26870-20000/2

27/03/2015 00:00:00





Standard Practice forComputed Radiology

(PhotostimulableLuminescence

Method)

ASTME2033 RadiographicExamination Using

ComputedRadiography


Method)

ASTME2033 Standard Practice forComputed Radiology


Method)

Yes QUALIFIED 04/03/2019 15:34:33 151500;QCS ComputedRadiography;QCS

Digital X Ray ofCastings ;

08/07/2016 11:35:54





Standard Practice forQualification and

Long-Term Stabilityof Computed

Radiology Systems

ASTME2445 PerformanceEvaluation and Long-

Term Stability ofComputed

RadiographySystems

ASTME2445 Standard Practice forQualification and

Long-Term Stabilityof Computed

Radiology Systems

Yes QUALIFIED 04/03/2019 15:38:32 151500;QCS ComputedRadiography;QCS

Digital X Ray ofCastings ;

08/07/2016 11:41:39

308050 IHI IONBOND INC 7856 MCCLOUDROAD

GREENSBORO 27409 USA SURFACETREATMENTSPECIALISTS




aluminium alloys




2 AIPI02-03-003 Physical VaporDeposition of




09/08/2018 16:20:20 QCS140425 -LIMITED TO ONE (1)

FURNACEIDENTIFIED AS

HC97 – NOSTRIPPING.


Masking.

16/03/2015 00:00:00

308050 IHI IONBOND INC 7856 MCCLOUDROAD

GREENSBORO 27409 USA SURFACETREATMENTSPECIALISTS



agents


Deposition


Deposition

6 AIPI02-04-007 WC-C:H coating byPhysical Vapour

Deposition


06/09/2018 10:01:52 QCS140436 -LIMITED TO ONE (1)

FURNACEIDENTIFIED AS HC

176 – NOSTRIPPING.


Masking.

16/03/2015 00:00:00


UK LTD.

BRADBOURNEDRIVE

MILTON KEYNES MK7 8AT United Kingdom SURFACETREATMENTSPECIALISTS



agents


Deposition


Deposition


01/08/2018 15:24:27 QCS150810 -Including CopperAlloy (Following

QCS150810_i2) -LIMITED TO ONE (1)

FURNACE, SERIEMODEL BAI830C,

IDENTIFIED AS SN257

ONLY ONE (1)REWORK

AUTHORIZEDFOLLOWING

SUPPLIER WORKINSTRUCTIONS

SP100 and SP 610:valid for Inconel and

Stainless Steel

ONLY ONE (1)REWORK

AUTHORIZEDFOLLOWING

SUPPLIER WORKINSTRUCTIONSSP400: valid for

Titanium

NO REWORK onCopper Alloy

16/02/2016 16:01:09

308322 BODYCOTESURFACE

TECHNOLOGY LTD

GREENWICH ROAD NEWPORT NP20 2NN United Kingdom SURFACETREATMENTSPECIALISTS







10/02/2020 16:32:35 QCS180123.Qualified Booth

identified as "Bunker"equipped with

JP5000ST torch andJP8000 console.

Qualified powdersAmperit 526

(WC17Co) andAmperit 558

(WC10Co4Cr).Including: Cleaning

Masking Blasting andGrinding. No

Stripping.

QCS180123 Application ofthermal spray

coatings WC-Co andWC

Application ofthermal spray

coatings WC-Co andWC-Co-Cr - AIPS02-03-001 - BodycoteSurface Technolo

30/04/2019 17:26:42

308730 AEROTREATMENTS PVT.

LTD

PLOT NO 25, ROADNO 24

TUMKUR 572138 India SURFACETREATMENTSPECIALISTS




alloys


alloys


2021-04-03 03/07/2020 16:56:33 03/07/2020 16:55:50



02 Nov 2020 10:51

76/81




ess scope



LTD





aluminium alloys


ALUMINIUM


ALUMINIUM


28/10/2016 11:13:15 methods 1,3 and 4. 08/09/2015 00:00:00


LTD





aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 28/10/2016 11:13:19 08/09/2015 00:00:00


LTD














28/10/2016 11:13:19 FOR PAINTAPPLICATION

ONLY.

14/12/2015 00:00:00


LTD






expansion






12/04/2019 13:53:38 ON METTALLICPARTS

08/09/2015 00:00:00


LTD






expansion



08/09/2015 00:00:00


LTD





agents



3 NA Yes QUALIFIED 19/12/2019 14:54:44 QCS191644 Electrolytic Zinc-Nickel Plating -

AIPS02-04-006 -

Electrolytic Zinc-Nickel Plating -

AIPS02-04-006 -Aero Treatments

Private Limited, India

04/01/2019 14:13:21


LTD





passivation







LTD





passivation




6 Yes QUALIFIED 28/10/2016 11:13:16 08/09/2015 00:00:00


LTD





passivation




2 Yes QUALIFIED 28/10/2016 11:13:19 08/09/2015 00:00:00


LTD





passivation


Steel


Steel


Steel


27/04/2017 10:45:30 on austenitic steels R=< 1140 mpa

18/02/2016 16:42:53


LTD





passivation




NICKEL ALLOYS


NICKEL ALLOYS


03/03/2017 13:58:27 on austenitic steels r< 1100 mpa

18/02/2016 16:45:28


LTD








LIMITATIONS

2021-04-03 16/07/2020 11:21:29 Limited to Stressrelieving & De-

embrittlement forPassivation as per

AIPS/AIPI02-05-005

11/02/2020 15:04:12


LTD






base d'époxy)




LTD







OR EXTERNALSURFACE



OR EXTERNALSURFACE



08/09/2015 00:00:00


LTD







General




LTD






Paint


Paint


Paint


28/10/2016 11:13:20 on metallic parts andsmooth top coat.

17/10/2016 13:16:35


LTD






systems




LTD






systems


RESISTANT PAINT


RESISTANT PAINT



08/09/2015 00:00:00


LTD






systems



EXTERNALSURFACE



EXTERNALSURFACE



08/09/2015 00:00:00


LTD






systems










LTD






systems










LTD






systems


systems


systems

A2 Yes QUALIFIED 28/10/2016 11:13:19 08/09/2015 00:00:00


LTD






systems


systems


A3 Yes QUALIFIED 28/10/2016 11:13:20 18/04/2016 17:15:20


LTD










LTD











LTD










LTD












08/09/2015 00:00:00


LTD








A3 Yes QUALIFIED 28/10/2016 11:13:20 08/09/2015 00:00:00


LTD








parts


parts




LTD




18/03/2019 10:58:50 Only for TP2 25/10/2017 15:32:46


LTD









2 Yes QUALIFIED 28/10/2016 11:13:18 18/02/2016 17:00:16


LTD





AIPS09-02-006 Pickling of StainlessSteel and Nickel-Chromium alloys


04/01/2019 16:46:32 limited toprepenetrant etch on15-5PH material for

5µm to 15µmmaterial removal

only.

04/01/2019 14:08:03



02 Nov 2020 10:51

77/81




ess scope



LTD








04/01/2019 16:49:10 limited toprepenetrant etch for

5µm to 25µmmaterial removal

only.

04/01/2019 14:01:32


LTD





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 12/04/2019 13:59:23 08/09/2015 00:00:00


LTD











3 Yes QUALIFIED 28/10/2016 11:13:21 08/09/2015 00:00:00


LTD





materials



5 NA Yes QUALIFIED 28/10/2016 11:13:18 19/04/2016 15:56:50


LTD





materials







5 Yes QUALIFIED 03/03/2017 14:17:59 08/09/2015 00:00:00


LTD







Detection


Detection

3-2 Yes QUALIFIED 28/10/2016 11:13:18 08/09/2015 00:00:00


LTD








4 Yes QUALIFIED 03/03/2017 14:10:19 08/09/2015 00:00:00


LTD





DETECTION


DETECTION


04/01/2019 13:53:54 limited to methodsA&D on aluminiumand titanium detail

parts only.

08/09/2015 00:00:00


LTD







03/04/2020 17:10:22 limited to methodsA&D on aluminium,titanium detail partsand 15-5PH material

only.

08/09/2015 00:00:00


LTD







02/07/2020 14:57:21 limited to picklingbefore FPI (AITM6-

1001)

02/07/2020 14:52:18

308866 CURTISS WRIGHTSURFACE

TECHNOLOGIESINDIA PRIVATE LTD

LINK ROADINDUSTRIAL AREA





expansion





4 Yes QUALIFIED 20/08/2020 14:55:54 02/02/2016 11:24:18








expansion


of metal parts






20/08/2020 14:55:41 ON METAL PARTSONLY

21/10/2015 00:00:00








expansion


of metal parts


REQUIREMENTS


REQUIREMENTS

4 Yes QUALIFIED 24/08/2020 09:34:39








expansion


of metal parts


of metal parts


of metal parts


20/08/2020 14:55:41 ON METAL PARTSONLY

21/10/2015 00:00:00






BEADS


BEADS


BEADS

5 Yes QUALIFIED 14/05/2019 13:45:25 02/02/2016 11:21:26

309168 HACHTEL F GGMBH CO KG

SCHELMENSTR. 42 AALEN 73431 Germany NDT SPECIALISTS Non DestructiveTesting








14/08/2020 11:06:34 QCS160093 issue3&4

For Inconel QL1parts:

Material: Nickelbased alloy HeatResisting Nickel

NiCr19FeNb (Inconel718) produced by

additive powder bedtechnology.

Structure build up,part family:

- A320 Neo O-Ring- A330 Neo O-RingThickness range: -

For Inconel QL2 &QL3 parts:

Material: Nickelbased alloy HeatResisting Nickel

NiCr19FeNb (Inconel718) produced by

additive powder bedtechnology.

Structure build up,part Family: Parts


Manufacturing (AM).Thickness range : 0-

20mm

For Titanium QL2 &QL3 parts:

Material: Titanium Ti-6Al-4V produced byadditive powder bed

technology.Structure build up,part Family: Parts


Manufacturing (AM).Thickness range : 0-

40mm

QCS200613 issue 1Material: Titanium

based alloy Ti6Al4Vproduced by additive

powder bedtechnology.

Structure build up,part family:

A350-1000 CLIPfamily

- V533 26870200/201

- V533 26871200/201

- V533 26872200/201

Note: Any other QL1part requires adedicated TQ.

Thickness range: n.a.?

QCS 160093 issue3;QCS 160093 issue4;QCS200613 issue

1

Qualification ofHachtel GmbHfacility in Aalen

(G;Qualification ofHachtel GmbHfacility in Aalen(G;Technical

Qualification ofHachtel to perform

CT S

Qualification ofHachtel GmbHfacility in Aalen

(Germany) for LM(Layer;

Manufacturing) CT-scan

insp;Qualification ofHachtel GmbHfacility in Aalen

(Germany) for LM(Layer;

Manufacturing) CT-scan insp;Affected

parts:;V533 26870 200/201;V533 26871 200/201;V533 26872 200/201

06/12/2018 10:11:20

309207 PROTEC SERVICEINDUSTRIE

1 RUE DE LAFOSSE CARDON

SAINT BRICE SOUSFORET




aluminium alloys


aluminium alloys


aluminium alloys

2 Yes QUALIFIED 14/11/2019 11:17:14 01/06/2016 17:32:59
















14/11/2019 11:17:13 without Post-treatment

1480.00;800.00 3890.00;6000.00 1400.00;1600.00 01/06/2016 17:27:56







passivation




2 Yes QUALIFIED 14/11/2019 11:17:13 01/06/2016 17:42:23











20/12/2019 11:09:05 LIMITED TOALUMINIUM

ALLOYS

10/12/2015 00:00:00



02 Nov 2020 10:51

78/81




ess scope








anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 14/11/2019 11:17:14 11/12/2015 00:00:00









2016-03-03 14/11/2019 11:17:14 ALUMINIUM PARTSWITH PENETRANTSENSIVITY 2 AND 3

10/12/2015 00:00:00

309626 ALP HAVACILIKSANAYI VE

TICARET AS

ORGANIZE SANAYIBOLGESI 8

ESKISEHIR 26110 Turkey SURFACETREATMENTSPECIALISTS






4 Yes QUALIFIED 03/03/2017 14:40:02 18/02/2016 17:09:01

309675 AEROLYCE ZA LE MONTEILHAUT

BELLAC 87300 France SURFACETREATMENTSPECIALISTS












09/10/2020 16:46:52 NO POSTTREATMENT

14/01/2016 00:00:00





passivation




2 Yes QUALIFIED 14/11/2019 11:18:03 1180.00 6480.00 2340.00 22/04/2016 14:55:03






systems


systems


systems


14/11/2019 11:18:03 RESTRICTED TOCLEARCOAT

APPLICATION ONEXTERNAL LABELS

AND INKMARKINGS -

OVERLAP AREA ONSLATS

04/01/2016 00:00:00









14/11/2019 11:18:03 Metallic parts only. 04/01/2016 00:00:00








parts


parts

2 Yes QUALIFIED 14/11/2019 11:18:03 02/11/2016 16:11:13





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 14/11/2019 11:18:02 02/11/2016 15:43:24







14/11/2019 11:18:02 Aluminum parts withsurface preparation /Stainless steel parts

without surfacepreparation /

Penetrant sensitivity2 only (method 1A2a)

02/11/2016 16:26:53


POLIGONOINDUSTRIAL

SEVILLA 41016 Spain SURFACETREATMENTSPECIALISTS












14/11/2019 11:19:29 No post-treatment,only for paintapplication

14/03/2016 17:11:06


POLIGONOINDUSTRIAL




passivation





14/11/2019 11:19:29 local applicationwithout paint andrepair application

14/03/2016 17:19:16


POLIGONOINDUSTRIAL








14/11/2019 11:19:28 metallic parts only 14/03/2016 17:13:49


POLIGONOINDUSTRIAL







parts


parts


14/11/2019 11:19:28 Aluminium reworkonly

14/03/2016 17:16:49


POLIGONOINDUSTRIAL



14/11/2019 11:19:28 Limited to surfacepreparation (SP7)

and temporaryprotection.

21/10/2019 15:51:11


POLIGONOINDUSTRIAL




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 14/11/2019 11:19:28 14/03/2016 17:32:07


POLIGONOINDUSTRIAL










3 Yes QUALIFIED 14/11/2019 11:19:28 14/03/2016 17:30:08


POLIGONOINDUSTRIAL




materials









POLIGONOINDUSTRIAL






14/11/2019 11:19:29 # Aluminium partsonly

# Penetrant Type 1 A2 a/d

14/03/2016 17:23:42


POLIGONOINDUSTRIAL






14/11/2019 11:19:28 Aluminium parts only 14/03/2016 17:38:22

310439 TORNGATSSERVICES

TECHNIQUES

945 RUE MICHELIN LAVAL H7L 5B6 Canada NDT SPECIALISTS Non DestructiveTesting


detection




3 NA Yes QUALIFIED 29/01/2020 14:30:35 05/10/2016 15:56:24

310500 BODYCOTE SUD-OUEST SAS

ZI QUERCYPOLE,CALFATECH

CAMBES 46100 France HEAT TREATMENTSPECIALISTS



Electron beamwelding of hard metal

AIPS01-04-011 Electron BeamWelding of Hard

Metals

3 AIPI01-04-011 Electron BeamWelding of Hard

Metals


23/07/2019 10:36:05 SFE1 (20 -24.5 mm)and SFE2 (19 - 25

mm)

Titanium alloys parts

FPQ-CS190548issue 1

FPQV545.14904.002.00 /V545.14904.000.00

V545.14904.002.00 /V545.14904.000.00A350-1000 Pylon

Lateral Panels(Electron BeamWelded Blanks);

09/08/2016 10:09:40






Generalrequirements for


AIPS01-04-001 Generalrequirements for


4 AIPI01-04-001 Generalrequirements for


A0 Yes QUALIFIED 29/09/2020 14:56:10 29/09/2020 14:55:32






general


General







alloys


alloys


alloys


02/04/2020 14:58:00 Stress relieving onraw material Ti-6Al-

4VVacuum Furnace

TTH1

09/08/2016 10:31:29






X-Ray Inspectionusing Digital Detector

Arrays

AITM6-7007 X-ray InspectionUsing Digital

Detector Arrays

2 AITM6-7007 X-ray InspectionUsing Digital

Detector Arrays


02/01/2020 09:21:43 QCS160650:Material type: TA6VStructure build-up:

electron beamwelded parts

Thickness Range:from 19 to 25mm

QCS181005Welded components

(orbital welding –laser beam welding –

TIG welding –resistance welding)Material type: Ta6V;

Inconel 625;Z10CNT18-10

Thickness: 2 to 10mm

QCS160650;QCS181005

Digital x-rayinspection of electronwelded parts ;X-RAY

AITM6-7007 onWelded components

(orbital wel

Material type: TA6V;Structure build-up:

electron beamwelded parts;

Thickness Range:from 19 to

25m;Material type:Ta6V; Inconel 625;

Z10CNT18-10Thickness: 2 to 10

mm

09/08/2016 10:37:41

310715 XRI TESTING 196I THUNDERBIRD TROY 48084 USA NDT SPECIALISTS Non DestructiveTesting








14/08/2020 09:50:40 General FilmRadiographyinspection +Technical

Qualification iawQCS200387 issue 1

and QCS200388issue 1 form ALM

parts.

QCS200388 issue 1NDI method: Film

Radiographyinspection (AITM6-7002) of titaniumQL2 / QL3 AM

powder bedcomponents

Material Titanium:Part buildup Additive

Manufacturing(Powder Bed

process)All following

references are withinthe scope of this

QCS Venturi Tube(PN

V3819089620000);Fuel Bracket (PN

V54510956); PivotFittings (PNV52172217);

Pyramid Bracket (PNV54510929)

Smallest defect sizeof 400 µm (solid

inclusions 150 µm) inall dimensions are

detectable (for X-rayparameters definedin X-R-I QTR andwork instructions)

Facility: X-R-I, 1961Thunderbird, Troy,

MI 48084, USANDT equipment: X-Ray tube equipmentutilized Comet 320,1.8 mm, automaticNDT-SI processor

QCS200387 issue 1NDI method: Film

Radiographyinspection (AITM6-7002) of Inco 718,QL1, AM, powderbed components

Material: Inco 718Part buildup: Additive

Manufacturing(Powder Bed

process)All following

references are withinthe scope of this

QCS:A320 O-RING (PN:

D302 22025 /D0073088)

Smallest defect sizeof 400 µm (solid

inclusions 150 µm) inall dimensions are

detectable (for X-rayparameters definedin X-R-I QTR andwork instructions).

Facility: X-R-I, 1961Thunderbird, Troy,

MI 48084, USA.NDT equipment: X-Ray tube equipmentutilized Comet 320,1.8 mm, automaticNDT-SI processor

QCS200387 ISSUE1 ;QCS200388

ISSUE 1

NDT qualification,film AITM6-7002Inconel 718 ;NDTqualification, film

AITM6-7002Titanium

NDT qualification,film AITM6-7002Inconel 718 ;NDTqualification, film

AITM6-7002Titanium

21/11/2016 14:02:10



02 Nov 2020 10:51

79/81




ess scope


311003 HOWMETRESEARCH

CENTER

1500 SOUTHWARNER STREET

WHITEHALL 49461 USA NDT SPECIALISTS Non DestructiveTesting








14/08/2020 14:01:24 Parts made ofTitanium Ti-6Al-4V

using Additive LayerManufacturing (ALM)Powder Bed Fusion

Laser Beam withThickness range: 0-40mm (QL2/3 serial

parts).Parts made of

Inconel 718 usingAdditive

Manufacturing (AM)by Powder BedTechnology with

Thickness range: 0-20mm (Oring

A320neo “D 30222025” Inco718;

Lower bleed CFMA320 neo “D361

20350” Inco718; T-duct CFM A320 neo

“D361 20359”Inco718T; Any otherpart must be subject

to a dedicatedtechnical

qualification).

QCS160063;QCS160063 issue

4;QCS160063 issue5

Parts made ofTitanium Ti-6Al-4V

using AdditiveLa;Qualification

extension forINCONEL718 AMparts.;Qualificationupdate to issue 4 ofHowmet Research

Parts made ofTitanium Ti-6Al-4V

using Additive LayerManufacturing (ALM)Powder Bed Fusion

Laser Be;Parts madeof Inconel 718 using

AdditiveManufacturing (AM)

by Powder BedTechnology with

thickness;Qualification updateto issue 4 of Howmet

Research Centerfacility for AM CT-

scan inspections iawAI

12/06/2017 15:45:06

312059 HARDIDEAEROSPACE

COATINGS LTD

11 WEDGWOODROAD

BICESTER OX26 4UL United Kingdom SURFACETREATMENTSPECIALISTS


02-03 Deposition Chemical VapourDeposition CVD ofTungstenTungsten

Carbide

AIPS02-03-012 Chemical VapourDeposition (CVD) ofTungsten/Tungsten

Carbide


08/09/2017 13:12:10 QCS 140597.Qualified Equipment:

Hardide FurnaceN°5. No Repair / No

Rework

21/03/2017 15:45:22

316220 GILLIS AERO 33 ROUTE DETOULOUSE

DIEUPENTALE 82170 France SURFACETREATMENTSPECIALISTS



agents




14/11/2019 11:20:20 LIMITED TO NONPAINTED PARTS

AND UTS<1450MPa

02/05/2018 11:43:33





passivation


Steel


Steel


Steel


14/11/2019 11:20:20 LIMITED TOPROCESSWITHOUTPICKLING

02/05/2018 11:49:55







14/11/2019 11:20:20 limited to stainlesssteels without etching

(not available).

04/05/2018 17:06:57




alloys



B NA Yes QUALIFIED WITHLIMITATIONS

14/11/2019 11:20:20 LIMITED TO UTS <1450MPa

02/05/2018 12:51:24

316698 STTS RUE SEBASTIEN ETJACQUES LORENZI

DUGNY 93440 France SURFACETREATMENTSPECIALISTS



80-T-35-0196 Alkaline Pickling ofTitanium and

Titanium Alloys


15/10/2019 10:20:20 Limited to theapplication of IF-CN-

36 and IF-CN-42(called at the drawing

as an alternative).

531.0151/97;D40762 Traitement desurface avant collage

de l'acierino;Airborne auxiliary

power - Air intakesystem - cha

A330 &A340;A330 &

A340

26/04/2019 12:08:28



TBD TBD Pickling of StainlessSteel prior to

Bonding

80-T-35-0118 Pickling of StainlessSteel prior to

Bonding


15/10/2019 10:36:05 Limited to theapplication of IF-CNfor A330 and A340

only

531.0151/97;D40762 Traitement desurface avant collage

de l'acierino;Airborne auxiliary

power - Air intakesystem - cha

A330 and A340;A330& A340

18/05/2018 08:49:15





ANTONIUSWEG 21 BAD SASSENDORF 59505 Germany SURFACETREATMENTSPECIALISTS




for fastening

80-T-30-9910 Drilling, Reaming andCountersinking ofRivet and Screw

Holes

80-T-30-9910 Drilling, Reaming andCountersinking ofRivet and Screw

Holes

Yes QUALIFIED 15/06/2020 10:59:04




03-06 Installation Installation of AnchorNuts

80-T-34-3000 Installation of AnchorNuts

80-T-34-3000 Installation of AnchorNuts

Yes QUALIFIED 16/06/2020 12:19:44 10/07/2019 10:27:59






systems





Yes QUALIFIED 16/06/2020 12:53:35 limited to metallicparts.

19/12/2018 14:50:56














A3 Yes QUALIFIED 04/03/2020 10:19:43 19/12/2018 14:16:09








15/06/2020 10:29:29 no freezing of mixedsealant

06/03/2020 11:11:58








Yes QUALIFIED 25/06/2020 08:57:30 16/06/2020 16:00:09

317650 SPI PORTUGUESA AVENIDA CIDADEDE GUARDA N42 E

44

PINHEL 6400-374 Portugal SURFACETREATMENTSPECIALISTS












18/11/2019 18:00:44 limited to paintapplication only asno post-treatment

available

05/04/2018 16:12:41


44





systems


systems


systems


18/11/2019 17:57:56 limited to varnishapplication after ink

marking

04/05/2018 11:07:06


44








18/11/2019 18:08:28 limited to metallicdetail parts.

05/04/2018 16:08:08


44







parts


parts


18/11/2019 18:05:13 limited on reworks 4-1 & 4-3

04/05/2018 11:11:54


44




anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 14/11/2019 11:21:15 05/04/2018 16:16:34


44






18/11/2019 18:02:54 limited to aluminiumparts and sensibility

S2

05/04/2018 16:20:14

319609 MECAPROTECINDUSTRIESSPEEDSHOP


MURET 31605 France SURFACETREATMENTSPECIALISTS











A3 Yes QUALIFIED 19/08/2019 16:42:30 14/11/2018 14:03:12







expansion


04/01/2019 09:11:23 Material Group III 14/11/2018 14:03:15






passivation





04/01/2019 09:13:48 Immersion andtouch-up, no repair

14/11/2018 14:03:14






passivation


Steel


Steel


Steel


07/01/2019 10:50:00 No pickling andCRES with Rm 1100

MPa max

14/11/2018 14:03:11







systems


systems


systems


04/01/2019 09:24:48 Ink markingprotection by varnish

only

14/11/2018 14:03:12










07/01/2019 10:27:35 Metallic material only 14/11/2018 14:03:17





04/01/2019 09:22:38 SP7, TP1 and TP2only

14/11/2018 14:03:13



02 Nov 2020 10:51

80/81




ess scope









3 Yes QUALIFIED 04/01/2019 09:37:46 14/11/2018 14:03:16






anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 14/11/2018 15:27:05 14/11/2018 14:50:34







12 Yes QUALIFIED 07/01/2019 10:32:09 14/11/2018 15:24:48

319693 POETON POLSKASP Z O O

JASIONKA 954 JASIONKA 36-002 Poland SURFACETREATMENTSPECIALISTS












LIMITATIONS

2020-11-18 27/04/2020 14:33:15 limited to full paintingscheme applicationonly (post-treatment

not available)

16/07/2019 13:46:09





passivation




2 Yes QUALIFIED 18/11/2019 10:55:47 400.00 150.00 100.00 18/11/2019 09:53:12






systems


systems


systems


18/11/2019 10:54:17 LIMITED TOPROTECTION BY

VARNISH

18/11/2019 10:01:25










18/11/2019 09:58:19








parts


parts

2 Yes QUALIFIED 18/11/2019 10:52:23 18/11/2019 10:05:53




18/11/2019 10:51:35 LIMITED TOMETHODS TP2 AND

SP7

18/11/2019 10:10:00





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 17/07/2019 17:00:06 17/07/2019 16:57:39





DETECTION


DETECTION


16/09/2019 15:04:36 limited to methods A& D, levels 2 & 3,forms a & d, for

aluminium parts only(as no etching for

titanium or steel partsavailable)

1500.00 300.00 220.00 17/07/2019 17:04:58







16/09/2019 15:07:11 limited to methods A& D, levels 2 & 3,forms a & d, for

aluminium parts only(as no etching for

titanium or steel partsavailable)

17/07/2019 16:44:01

321490 AEROTECHINSPECTION NDT

INDIA PRIVATELIMITED

PLOT NO 582A DHARWAD 580011 India NDT SPECIALISTS Non DestructiveTesting








07/06/2019 15:39:23 QCS190300 isue 2:NDI method: X-RayExamination Using

ComputedRadiography


Method) – ASTM E2033 & ASTM E

2445Material Type: Non-ferrous (AluminumAlloy) & Ferrous

AlloyStructure build up:

CastingPart Family &

Program: SA & LR –air vent intake

Acceptance criteria:ABP 0-2018 andAIMS 03-16-000

Equipment: GE makeISOVOLT M2 160 X-Ray system (160Kv

& 19mA)

QCS190300 TechnicalQualification for CR

(ComputedRadiograp

Qualification ofComputed

Radiographyaccording to ASTM E2033 & ASTM E2445 to inspect Non-

ferrous

20/03/2019 10:47:01

323165 SOUTH WESTMETAL FINISHERS

UNIT 9A LIMBER RDYEOVIL MARSH

YEOVIL BA228RR United Kingdom SURFACETREATMENTSPECIALISTS




expansion





4 Yes QUALIFIED 16/10/2020 09:10:22 16/01/2020 14:45:05






agents






3 Yes QUALIFIED 16/10/2020 09:19:53 16/01/2020 12:50:36






agents



CADMIUM ANDZINC


CADMIUM ANDZINC

3 Yes QUALIFIED 16/10/2020 09:26:36 16/01/2020 14:52:04











16/10/2020 09:09:01 Limited to StressRelieving during

Cadmium Plating.

16/01/2020 14:39:11










6 Yes QUALIFIED 16/10/2020 09:05:23 16/01/2020 14:48:28

323967 MECAPROTECLOIRE ATLANTIQUE

ZA DES 4 NATIONS VIGNEUX DEBRETAGNE





expansion


20/01/2020 10:03:01 Limitation to Titaniumand Stainless steelCRES, abrasive:

alumina, change ofabrasive for each

change of material totreat (because no

iron analysis)

12/12/2019 10:35:22






passivation


Steel


Steel


Steel


12/12/2019 15:51:01 Limitation totreatment without

pickling, to austeniticCRES Rm<1100MPa

and/or core orsurface hardness <

320HV.

12/12/2019 15:41:07







systems


systems


systems


12/12/2019 09:25:35 Limitation to varnishapplication on

marking of parts.

12/12/2019 09:19:19

324352 AEROPROTECGDIM SAS

LIEU DIT MIQUEU UZEIN 64230 France SURFACETREATMENTSPECIALISTS












LIMITATIONS

2020-12-31 02/07/2020 16:29:50 Without posttreatment

02/07/2020 16:29:05





passivation





LIMITATIONS

2020-12-31 02/07/2020 16:21:25 Limitation to penapplication for touch

up

02/07/2020 16:19:30









LIMITATIONS

2020-12-31 02/07/2020 16:14:59 Limitation to metallicparts

02/07/2020 16:14:29





anodising process



surface resistance)



surface resistance)

2 Yes QUALIFIED 02/07/2020 15:48:47 02/07/2020 15:48:18











3 Yes QUALIFIED 02/07/2020 15:53:02 02/07/2020 15:52:02



02 Nov 2020 10:51

81/81




ess scope


326549 MTUMAINTENANCE

COATINGSERVICES GMBH

ADOLF-ROHRBACH-STR. 3

LUDWIGSFELDE 14974 Germany SURFACETREATMENTSPECIALISTS



passivation






WORKBENCHACTIVITIES ONLY

27/03/2020 13:32:54







passivation






Yes QUALIFIED 13/08/2020 13:29:06 27/03/2020 13:08:50








base d'époxy)


base d'époxy)




27/03/2020 12:58:55









General


General


13/08/2020 13:29:07 FOR EXTENDEDWORKBENCH

ACTIVITIES ONLY

27/03/2020 12:50:24















27/03/2020 11:49:46















27/03/2020 11:41:51






13/08/2020 13:29:08 Limitation toextended work bench

activities

27/03/2020 12:03:19

327213 METAL CHROME 23 AVENUE ANDREDULIN





expansion


of metal parts


of metal parts


of metal parts


08/09/2020 11:48:46 Shot peeningAutomatic with

ceramic shots, onlyon Aluminum parts,

and only in building 6

25/06/2020 11:20:38

External Report Created On 16 Jul 2020 08:38 - Airbus · 2020-07-16 · finish paints to an...

Documents

Transcript of External Report Created On 16 Jul 2020 08:38 - Airbus · 2020-07-16 · finish paints to an...