EXTENSION ARMS - Hi-Line Utility Supply · EXTENSION ARMS SUPER "U" ARMS Hastings Super "U" Arms...
Transcript of EXTENSION ARMS - Hi-Line Utility Supply · EXTENSION ARMS SUPER "U" ARMS Hastings Super "U" Arms...
HOT ARMS, GINS, PLATFORMS & LADDERS
• Insulator - Available as a separate item or added to existing auxiliary arm wire holders to upgrade to 34.5kV
• Roller Wire Holder - Offers protection to conductors while raising the conductor above the work area. For conductors up to and including 1.5” diameter. The gate is held closed by a spring-loaded latch.
AUXILIARY ARM ATTACHMENTS
Hot
Arm
s, G
ins,
Pla
tform
s &
Lad
ders
Brand Cat. No. Dimensions Max Cros-sarm Size
No of Wire
Holders
Max Vert Load per
Wire HolderWeight
H4800-60 2.5" x 5' 3.25" x 4.75" 1 150 lb 11.5 lb
5000 2.5" x 5' 4.25" x 6.75" 1 150 lb 11.3 lb
H4800-72 2.5" x 6' 3.75" x 4.75" 2 150 lb 13 lb
5006 2.5" x 6' 4.25" x 6.75" 2 150 lb 14.5 lb
C400-1310 3" x 6' 6" x 6" 2 300 lb 24 lb
Cat. No. Description Max Cros-sarm Size
No of Wire
Holders
Load Limit Weight
7545 Standard Super "U" 4.25" x 6.75" 2 400 lb 18.8 lb7546 Super "U"-large hanger loop 6" x 6" 2 400 lb 20.4 lb7553 Super "U"-large capacity holders 4.25" x 6.75" 2 400 lb 19.8 lb
EXTENSION ARMS
SUPER "U" ARMSHastings Super "U" Arms provide greater strength and durability. Arms are rated for 34.5KV phase-to-phase.• Standard conductor holder
accepts up to 1-1/16" O.D.• Large capacity accommodates
a conductor inside a line hose. Gate latch is 2-5/8"
STANDARD ARMSDesigned for use as a
temporary aid in replacing existing conductors and insulators, or for moving out conductors to obtain working clearance.
• 15KV rating without insulator
• 34.5KV rating with insulator
5006
7546
Cat. No. M4805-7 C400-0268 M4805-17 M4805-15 M4805-16 E400-0008 7551 7552 P640062P P10024
Desc. InsulatorRoller Wire
Holder (no insulator)
1" Fork Wire Holder
(no insulator)
1" Fork Wire Holder
(with insulator)
C-Type Wire Holder
(no insulator)
1.5" Fork Wire Holder (no insulator)
Super "U"
Holder
Super "U" Holder - Lg
Capacity
2.5" Chance
Eyescrew
2.5" Hastings Eyescrew
Weight 2.5 lb 4.5 lb 2 lb 5.5 lb 2.5 lb 2.5 lb 1.2 lb 1.5 lb
• Fork Type Wire Holders - Latch closes automatically behind the conductor to hold it in the wire holder. Includes 2.5” pole clamp.
• C-Type Wire Holders - Suspended for a 2.5” diameter temporary crossarm above the conductor as a hook to receive the conductor after it is untied.
H4800-72
162HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HOT ARMS, GINS, PLATFORMS & LADDERS
163
HOT ARMS, GINS, PLATFORMS & LADDERS
SUPER “U” CONDUCTOR SUPPORT WITH STRAP BINDERDesigned for replacing conductors and insulators and maintenance of line voltages up to and including
34.5KV phase to phase. Super "U" design provides greater strength and durability. 200 lb working load per conductor holder. Features a nylon strap.
CONDUCTOR SUPPORT WITH CHAIN BINDER
CONDUCTOR SUPPORT WITH STRAP BINDER
Cat. No. C400-0517Clamps to the crossarm, adjusting to
crossarms from 3.25” x 4” to 4” x 5.” C-clamp can be installed with a Grip-All clampstick. For 34.5kV or when tool is left overnight, a M4805-7 insulator should be added to the wire holders.
Designed for temporary support of conductors up to 1-1/16" O.D. Features a 2" x 44" nylon strap.
Used to hold energized distribution conductors during replacement of poles or repair of pole top and stand-off insulators. Features wheel tightener for poles up to 14" in diameter. Working load: 150 lb per wireholder.
Hot A
rms, G
ins, Platforms
& Ladders
Brand Cat. No. Description Weight
T400-1940 30" with one conductor support 14 lb
5038 34" with one conductor support 12 lb
T400-1939 48" with two conductor supports 18 lb
5040 48.5" with two conductor supports 15 lb
T400-2007 Replacement D Buckle Strap Binder 4.5 lb
5049 Replacement Nylon Strap with Hook 1.0 lb 5038
CROSSARM MOUNTED TEMP. CONDUCTOR SUPPORT
TEMPORARY DEAD END ARMS
Cat. No. Description WeightH4809W Single Conductor Support 20 lb
C400-1509 Two Conductor Supports 22 lbM1848W Fork Type Wire Holder
H4809W30" long
C400-150948" long
Cat. No. Description Weight5045 34.75" Arm with one conductor holder 14.3 lb5047 49-7/8" Arm with two conductor holders 18.0 lb5049 Replacement strap with hook 1.0 lb
Cat. No. Description Width Adjustment7674 Arm with 3 way bracket 3-7/8", 5", 6-1/8"7675 Arm with butt swivel 3-7/8", 5", 6-1/8"7676 Arm with 3 way bracket 6-1/8", 7-1/4", 8-3/8"7677 Arm with butt swivel 6-1/8", 7-1/4", 8-3/8"
Enables a line crew to spread conductors off an existing dead end arm. 3" diameter fiberglass with a 500 lb per position (1000 lb total) load limit. Arms have two holes with 18" spacing. Accommodates 5/8" hardware bolts. Height adjustments are 4-5/8", 4-7/8", 5-7/8" & 6-1/8".
7675
T400-1939
5045
CROSSARM LINK STICK
Cat. No. PSC4004132Quickly puts insulated link in hoist-assisted jobs. Provides 21.5" insulating length. Fits standard 3.75"-4.75" crossarms.
HOT ARMS, GINS, PLATFORMS & LADDERS
Usable with standard gins, the strap-type ratchet pole binder adds speed and convenience when hanging temporary pole supports or gins.
Transformer Gins: The standard base unit is for mounting on clear pole sections and the 5” extended base model allows mounting to bridge up to 4” x 5” crossarms. The swivel top head can be swiveled to bypass secondary lines when necessary. A wheel tightener and 36” chain is a part of each unit.
Crossarm Gins: Can be used with rope blocks or hand line to lift conductors from their insulators. A removable cadmium plated steel pin provides adjustment for crossarm from 3.5" x 4.5" up to 4.75" x 5.75."
TRANSFORMER GINS WITH STRAP BINDER
Cat. No. T400-1937 T400-1938 5800-1 5800-3 5800-4 5800-7 5800-8
Description Standard Base 5" Extended Base Standard Base 4.5" Extended Base
4.5" Extended Base Standard Base Standard Base
Head Type Standard Standard Standard Standard Standard Swivel Sheave Head
Swivel Sheave Head
Height 26" 26" 24.25" 36" 48" 36" 48"
Load Limit 2000 lb 2000 lb 1300 lb 1300 lb 2500 lb 3800 lb 3800 lb
Repl. Strap T400-2007 T400-2007 5049 5049 5049 5049 5049
Weight 14.25 lb 18.25 lb 8.6 lb 10.6 lb 33 lb 49 lb 52 lb
TRANSFORMER & CROSSARM GINS WITH CHAIN BINDER
Cat. No. C400-0090 C400-0315 C400-0440 H20 T400-0870
Description Transformer Gin w/Standard Base
Transformer Gin w/5" Extended Base
Transformer Gin w/5" Extended Base Crossarm Gin Crossarm Gin
Head Type Standard Standard Swivel Top --- ---
Height 26" 26" 48" 44" 56"
Max Rating 2000 lb 2000 lb 2000 lb 750 lb at 30 deg angle
500 lb at 30 deg angle
Weight 15 lb 30 lb 37 lb 10 lb 12 lb
Hot
Arm
s, G
ins,
Pla
tform
s &
Lad
ders
164HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 165
HOT ARMS, GINS, PLATFORMS & LADDERS HOT ARMS, GINS, PLATFORMS & LADDERS
Platform shown with optional
Railing and Pivot Type Mount. Cat. No. Description Weight
4' PLATFORM AND ACCESSORIES
C402-1042 4' Insulated Platform & Adjustable Pole Mount 49 lbs.
H4964A Epoxiglas Tripod for 4' Platform 9 lbs.
C402-1055 Epoxiglas Railing for 4' Platform 13 lbs.
C402-1164 Pivot-type Pole Mount for 4' Platform 29 lbs.
6' PLATFORM AND ACCESSORIES
C402-1043 6' Insulated Platform & Adjustable Pole Mount 56 lbs.
C402-0023 Epoxiglas railing for 6' Platform 15 lbs.
C402-1173 Pivot-type Pole Mount for 6' or 8' Platform 30 lbs.
8' PLATFORM AND ACCESSORIES
C402-1079 8' Insulated Platform & Adjustable Pole Mount 60 lbs.
C402-0024 Epoxiglas Railing for 8' Platform 17 lbs.
C402-1173 Pivot-type Pole Mount for 6' or 8' Platform 30 lbs.
TOWER MOUNTS, ADJUSTABLE AND PIVOT TYPE ARE ALSO AVAILABLE
Pivot-Type Mount option allows for easy positioning to access jobs. Permits linemen to swivel mounted platform
through 140 horizontal degrees.
4' Platform shown with standard adjustable pole mount and optional Tripod.
EPOXIGLAS INSULATED PLATFORMSTo provide convenient workstations for rubber-glove work on energized lines, these platforms quickly secure to pole with either a fixed mount or pivot mount.
• Two 2" diameter poles connect the platform to the mounting bracket• Features 12" of clear insulation• Maximum load rating: 500 lb• For belt-on/restraining guide, add optional tripod or railing• Three strips of 2" non skid tape proivde improved footing
Cat. No. Description WeightC400-0648 Multi-Duty Gin Complete 70 lb
C85W Mounting Bracket with Wheel Tightener 17 lb
• Gin clamps at top of pole to lift heavy equipment
• Gin can be mounted lower on pole without changing mounting bracket to avoid obstructions
• 4”x4” Epoxiglas beam w/2000 lb. load rating• With beam removed, mounting bracket can be used by itself for
hanging transformers• Maximum rating of gin bracket is 2500 lbs. • The gin beam can be rotated in a half circle, swinging the load away
from underbuild obstructions.
Hot A
rms, G
ins, Platforms
& Ladders
SURFACE GUARD
Cat. No. Protec-tor Size Pole Dia.
PSC406-0624 7" x 4' up to 15"PSC406-0625 7" x 5' up to 19"PSC406-0626 7" x 6' up to 23"PSC406-0627 7" x 7' up to 27"
Protective cover for mounting chain binder tools to concrete, fiberglass, and steel poles. Protects pole with-out reducing tools' load rating.
MULTI DUTY GIN
Jib mounted, winch-driven three phase boom lifts enable a material-handler boom truck to lift single- or three-phase system conductors.
Center wire holder, used alone,
permits single phase lifts.
Boom adapter can pin at various angles. Built-in scale continuously monitors load uplift. Nylon rollers ensure
smooth mast travel.
Wireholders latch easily from bucket with hookstick. 12" Epoxirod
link insulates each latch-release lanyard.
HOT ARMS, GINS, PLATFORMS & LADDERS
BOOM WIPES
Cat. No. LengthB-1 Individually Packaged Wipes (24/case)
B-D72 Canister of 72 wipes
THREE-PHASE BOOM LIFTS
Cat. No. Truck Application WeightC400-1612 Asplundh: 3-3/4" diameter jib 225 lbC400-1613 Telelect: 4-1/4" diameter jib 225 lb
C400-1614 Holan: 5-1/8" diameter jib 225 lb
C400-1664 Altec: 4" diameter jib 225 lb
C400-1677 High Ranger: 2-7/8" diameter jib 225 lb
C400-1709 Teco: 4" x 4" square jib 225 lb
C400-1710 Pitman: 4" x 5" square jib 225 lb
C400-1711 R.O. Products: 5-1/4" diameter jib 225 lb
Other sizes available, please call for more information
• For crossarm construction: 10’ arm attaches at mast top (pictured)
• For armless construction: 6’ arm attaches at proper level on series of mounting holes on mast
Each complete unit includes:• 10' Vertical orange Epoxiglas mast (4" x 4")• 10' Horizontal gray Epoxirod support arm (2-1/2" dia.)
with four Roller-type Wireholders• 6' Horizontal gray Epoxirod support arm (2-1/2" dia.)
with one wireholder for center mast • Storage bags for all components above
• Operator remains in bucket, positioned to perform such routine jobs as replacing insulators, crossarms or poles
• Wireholders latch easily from bucket with hookstick• 12" Epoxirod link insulates each latch-release lanyard• Vertical load per wireholder: 300 lb • Balanced vertical load: 1200 lb (including tool)
The pre-wash wipe is a cleaner-saturated towel that cleans grease, tar, creosote, salt spray, pine pitch, hydraulic fluid and road debris off fiberglass boom arms. Washes off during sub-sequent water rinsing.
Hot
Arm
s, G
ins,
Pla
tform
s &
Lad
ders
166HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 167
HOT ARMS, GINS, PLATFORMS & LADDERS HOT ARMS, GINS, PLATFORMS & LADDERS
BOOM MOUNTED LIFT ARMBoom mounted lift arm can be utilized as a lifting attachment when mounted to derrick trucks and bucket trucks with lifting capabilities.• Can be used for changing out poles, cross arms, insulators and mid
span lifting requirements• Lift arm can be mounted to a square, rectangular, round, or oval boom
(order proper boom adapters & blocks)• Mounting assembly features a ratchet which allows the arm to be posi-
tioned under load• Fiberglass arm and mast assembly is 3" O.D. while the fiberglass brace
is 1.5" O.D.• Balanced load limit with brace is 1,000 lb. Unbalanced load limit is
200 lb per conductor holder.• Arm assembly includes swivel support, brace, (2) brace clamps, and
(3) fourway rollers.
Cat. No. 11686 11683 13128 13129
DescriptionBoom Bracket with Ratchet
Assembly, fits 8"x8" to 11"x11" booms
Mast Assembly5' x 3" with quick detach pin
Arm Assembly9' x 3"
Arm Assembly11' x 3"
Weight 38 lb 9.3 lb 37 lb 40 lb
Cat. No. 21642 12666 5034 12366 JTC-500
Description Self Aligning Conductor Holder
Super Duty Conductor Holder
Four Way Conductor Holder
Suspension Insulator String Holder
Rope Sheave Head
Application1.5" opening, for attach-
ment to mast. Spring loaded latch is hot stick
operable
For attachment to mast and jib adapters. Accepts
2" dia conductors.
For mounting to 3" OD arm. Opening is 1.5". Spring loaded latch is
hot stick operable
For attachment to mast. Works on
both 9" and 10" dia insulators
For 3/4", 500 lb swl
Max Load 300 lb 500 lb 300 lb --- ---
Hot A
rms, G
ins, Platforms
& Ladders
Available by application:
HOT ARMS, GINS, PLATFORMS & LADDERS
JIB EXTENSIONS
A C400-0747 Roller WireholderB P400-1594P Round Jib AdapterC T400-1525 3" dia. Round Jib Extension
D C400-1669 Roller WireholderE T400-1525 3" dia. Round Jib Extension
F C400-0747 Roller WireholderG P400-2536P Square Jib AdapterH PST400-2748 4"x4" Square Jib Extension
I PST400-2818 3" dia. Round Jib Extension with Wireholder
J PST400-3059 3" dia. Round Jib Extension with Wireholder & Sheave
F GH
DE
A BC
• 15KV Hot Stick Work only• 15KV Rubber Glove work from an insulated platform• 15KV Hot Stick Work, Rubber Glove, & Underground work• 25KV Rubber Glove work from an insulated platform• 25KV Rubber Glove work from an insulated bucket truck• 35KV Rubber Glove work from an insulated platform• 15, 25 & 35KV Hot Stick Work only• 15, 25 & 35KV Hot Stick Work & Rubber Glove Work• 15, 25 & 35KV Hot Stick Work, Rubber Glove & Underground Work• 15 - 69KV, 477 kcmil and smaller, Hot Stick Work only• 69KV, 477 kcmil and smaller, No Underbuild, Hot Stick Work• 69KV, 477 kcmil and smaller, With Underbuild, Hot Stick Work• 69 - 161KV, 477 kcmil and smaller, No Underbuild, Hot Stick Work• 69 - 161KV, 477 kcmil and smaller, With Underbuild, Hot Stick Work
Please call for a copy of any of these tool lists
TOOL TRAILER TOOL LISTS
Hot
Arm
s, G
ins,
Pla
tform
s &
Lad
ders
I
J
168HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 169
HOT ARMS, GINS, PLATFORMS & LADDERS HOT ARMS, GINS, PLATFORMS & LADDERS
• Hooks are formed from 1" tempered steel and can be swiveled.
• Steel chains clip to hooks to assist in securing ladder to support
• Rung material for both rated ladders are 1-1/4" sand-coated Epoxiglas
SWIVEL HOOK LADDERS
Cat. No. Length Max Work Load Weight
Standard Duty
2" Side Rails & 8" Hooks
H4904-8 8' 1250 lb 42 lb
H4904-10 10' 1250 lb 46 lb
H4904-12 12' 1250 lb 52 lb
H4904-14 14' 1250 lb 60 lb
H4904-16 16' 1250 lb 68 lb
Heavy Duty 2.5" Side Rails
& 8" Hooks
H4905-8 8' 1250 lb 47 lb
H4905-10 10' 1250 lb 55 lb
H4905-12 12' 1250 lb 63 lb
H4905-14 14' 1250 lb 70 lb
H4905-16 16' 1250 lb 76 lb
H4905-18 18' 1250 lb 85 lb
H4905-20 20' 1250 lb 98 lbAdd suffix "A" to Cat No for 14" hooks (1000 lb work load)Add suffix "B" to Cat No for 18" hooks (750 lb work load)
Length Cat. No.(7.5" Hooks)
Cat. No.(12" Hooks)
Cat. No.(15.5" Hooks)
Standard Duty
2" Side Rails
8' 7235 7240 7245
10 7236 7241 7246
12' 7237 7242 7247
14' 7238 7243 7248
16' 7239 7244 7249
Heavy Duty 2.5" Side Rails
10' 13023 13024 13025
12' 13026 13027 13028
14' 13029 13030 13031
16' 13032 13033 1303418' 13035 13036 13037
20' 13038 13039 13040
Swivel hook ladders are available in standard duty and heavy duty:
• Standard Duty Ladders (2" side rails) are normally used for vertical suspension applications.
• Heavy Duty Ladders (2.5" side rails) are recommended where men are required to work from the ladder in a tagged out position
Hot A
rms, G
ins, Platforms
& Ladders
• Hooks fold for storage. • Plated steel safety
chains are standard. • Fiberglass rails and
rungs have a solid foam core and are coated with non-slip grit.
HOT ARMS, GINS, PLATFORMS & LADDERS
The greater mechanical strength and less deflection of the Three Rail Ladder increases the efficiency of the lineman when working in a tagged-out position.
2.5" center rail is capped on both ends and 2" side rails with 8" swivel hooks on top and caps on bottom.
THREE RAIL LADDER
Cat. No. Description WeightC402-0119 20' Straight Ladder 100 lbC402-0512 8' Bottom Section 43 lb
C402-0513 12' Bottom Sectoin 52 lb
C402-0514 12' Top Section 62 lb
All models are two section, spliced fiberglass ladders featuring heavy duty 2.5" siderails. Ladder options include three hook sizes.
Cat. No. Top SectionLength Weight
C402-0482 10' 44 lb
C402-0402 12' 48 lb
C402-0404 14' 52 lb
C402-0407 16' 46 lb
C402-0411 20' 64 lb
T402-0423 10' middle section 44 lb
C402-0418 8' bottom section 28 lb
C402-0421 10' botom section 32 lb
C402-0422 12' bottom section 36 lb
Cat. No. 059738P - Klik PinCat. No. P402-0041 Eye Pin
Length Cat. No.(7.5" Hooks)
Cat. No.(12" Hooks)
Cat. No.(15.5" Hooks)
16' (10' & 6') 20898 20899 20900
18' (12' & 6') 20901 20902 20903
20' (14' & 6') 20904 20905 20906
22' (14' & 8') 20907 20908 20909
24' (14' & 10') 20910 20911 20912
KLIK PIN 059738P
EYE PIN P402-0041
All models are heavy duty with 2.5" siderails. Chance ladders feature 8" hooks and are interchangeable, offering many options for total reach.
SPLICED LADDERS
Hot
Arm
s, G
ins,
Pla
tform
s &
Lad
ders
170HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HOT ARMS, GINS, PLATFORMS & LADDERS
171
HOT ARMS, GINS, PLATFORMS & LADDERS
LADDER SUPPORT ATTACHMENTS• Converts epoxiglas ladder to a platform for
live-line maintenance• Kits are designed for use on 2.5"-dia. side
rail ladders. For 2" side rail application order individual components (call customer service for assistance)
• Sets are designed for steel or wood structures, vertical or horizontal
• Support the structure-end of the ladder in a tagged-out position
Kit Consists of:C402-0139
for Vertical Attach. on Towers
C402-0140for Horiz. Attach.
on Towers
C402-0155for Vertical Attach. on
Wood/Steel PolesE402-0525
Vertical Tower Attachment
1
E402-0087Horizontal Attach.
Tower1
E402-0526Vertical Attach. Pole 1
E402-0568 Yoke Assembly 1 1 1
E402-0009Spreader Bar 1 1 1
E402-0138Ladder Clamp 2 2 2
E402-0141Swivel Stick 2 2 2
E402-0092 Double Clamp 1 1 1
Can be ordered as individual components or in a kit
Vertical Tower Mount Horizontal Tower Mount Vertical Wood/Steel Pole Mount
Spreader BarE402-0009
Ladder ClampE402-0138 (for 2.5" side rails)PST400-0833 (for 2" side rails)
Double ClampE402-0092
Cat. No. DescriptionE402-0141 12.5' Swivel StickT402-0899 6' Swivel Stick
T402-0900 8' Swivel Stick
T402-0901 10' Swivel Stick
For ladders with 2" side rails, in addition to tower assembly and other accessories, you will need the following specially sized yoke assembly and ladder clamp:• Cat. No. PSE4020568001
Yoke Assembly for 2" side rails
• Cat. No. PST400-0833 Ladder Clamp for 2" side rails
Yoke AssemblyE402-0568 (for 2.5" side rails)
PSE4020568001 (for 2" side rails)
E402-0525 (Support
Assembly)
E402-0568 (Yoke
Assembly)
E402-0568 (Yoke
Assembly)
E402-0087(Support
Assembly)
E402-0526(Support
Assembly)
E402-0568 (Yoke
Assembly)
Hot A
rms, G
ins, Platforms
& Ladders
Kit Options: