Explosion-Protected Contact Block · Explosion-Protected Contact Block Bloc de contact protégé...
-
Upload
phungtuyen -
Category
Documents
-
view
224 -
download
0
Transcript of Explosion-Protected Contact Block · Explosion-Protected Contact Block Bloc de contact protégé...
Explosion-Protected Contact Block
Bloc de contact protégé contre les explosions
Explosionsgeschütztes Kontaktelement
Blocco di contatti antideflagranti
Bloque de contactos protegidos contra explosión
Bloco de contato com proteccão contra explosões(Cat 800TC-XAF)(Cat 800TC-XAF)
5 - 7 lb-in
(.55 - .8 Nm)
IND. CONT. EQ.FOR USE IN HAZ.LOCATIONS (A196)Class 1 Div. 2(Groups A,B,C and D)A600 / Q600
EN60947-5-1
s
CAUTION: To reduce the risk of ignition of hazardous atmospheres, disconnect the equipment from the
supply circuit before opening. Keep assembly tightly closed when in operation.
5 - 7 lb-in
(.55 - .8 Nm)
5 - 7 lb-in
(.55 - .8 Nm)
Power Module
Trigger Action E-Stops
800T-TFX_; 800H-TFRX_Power Module
5 - 7 lb-in
(.55 - .8 Nm)
800T-TFX_; 800H-TFRX_
Vibration: 5g, 0.7 mm peak-to-peak displacement, sine sweep 10-2000 Hz / IEC 60068-2-6Shock: 15g (800H-TFRX_ Trigger Action E-Stops), 50g (all other devices) / IEC 60068-2-27
Selector Switch (non-illuminated type) Compatibility: Bul. 800H: Series G and later / Bul. 800T: Series U and later
Note: 800T devices are rated Type 4 and 13, 800H devices are rated Type 4, 4X and 13.Install on a flat, smooth surface of an enclosure. Devices maintain their Type ratings only when properlymounted in an enclosure with the same rating(s).
Qty (2) max.
Installation Instructions
800T-TFX_; 800H-TFRX_
Wire Connection
Branchement d’un câble
Anschließen des Drahtes
Connessione cavo
Conexión del cableado
Conexão com fio
Ring Lug Connection
Branchement d’une cosse
Anschließen des Ringanschlusses
Connessione capocorda a occhiello
Conexión de la orejeta de anillo
Conexão olhal
0.3 in
(8 mm)
AWG 14 - 18
(0.75 - 2.5 mm2)
6 - 8 lb-in
(0.7 - 0.9 Nm)
6 - 8 lb-in
(0.7 - 0.9 Nm)AMP / TYCO 1-34142
or equivalent
1
2
34
100%
x 2
1/8 in
or
3/16 in
3/16 in #1
or
1/4 ø
(ø 6.4 mm)43/64"
(17.1 mm)
11/64"
(4.4 mm)
9/16"
(14.3 mm)
Optional
En option
Option
Opcional
1-13/64 ø
(ø 30.6 mm)
1/2"
(12.7 mm)
1/2"
(12.7 mm)
Minimum
Minimo
Metallic
Métallique
Metall
Metallico
Metálico
Electrical Clearance to Metal Enclosure
Decacement electrique de l'acces au coffret de metal
Mindestabstand elektr. Klemmen/metalllgehäuse
Huelco minimo entre las bornas y la caja metallica
Distância livre des ligações eléctricas à caixa metálica
2-1/2"
(63.5 mm)
1-27/32"
(46.8 mm)
Contact Block Circuit Identification
Circuit Symbol Description
1 N.O. - 1 N.C.3-4, A
1-2, B
Identification
Wire Range: 14-18 AWG and (2) 14-18 AWG (mixed wire sizes not allowed)
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 800T-IN020B-MU-P - August 2016
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
PN-207805
DIR 10000037551 (Version 01)Copyright © 2015 Rockwell Automation, Inc. All Rights Reserved. Printed in China.
CONFIDENTIAL AND PROPRIETARY INFORMATION. THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF
ROCKWELL AUTOMATION, INC. AND MAY NOT BE USED, COPIED OR DISCLOSED TO OTHERS, EXCEPT WITH THE AUTHORIZED WRITTEN
PERMISSION OF ROCKWELL AUTOMATION, INC.
Sheet
Size Ver
Of 11
ADr. DateJ. MEREDIG 03-31-15
SPECIFICATIONS FOR1 OR 2 PAGE INSTRUCTION SHEET2-1/8” W x 1-5/6” H - FINAL FOLD
MATERIALSIZE
FOLD
BODY STOCK WHITEBODY INK BLACK
FLAT
8-1/2" W x 11" H 2-1/8" W x 1-5/6" H
Final Fold
1-5/6”
2-1/8”
10000757737
11”
8-1/2”
Note: After folding---Printed in (Country where printed*), part number(s) and barcode (when used) should be visible.
* The printing vendor may change the instruction sheet files to show the correct country.
PN-123456DIR 10000000000 (Version 00)
Printed in U.S.A.
BARCODE
00