Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC...

20

Transcript of Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC...

Page 1: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 2: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing

ContentProduct Profile -------------------------------------------------------3

Disclaimer ------------------------------------------------------------3

Safety Cautions -------------------------------------------------------4

Cautions Before Flight ------------------------------------------------5

Tools and Materials ---------------------------------------------------5

Optional Equipment --------------------------------------------------6

Multi-rotor Size -------------------------------------------------------6

In the Box -------------------------------------------------------------7

Mounting the Landing Gear ------------------------------------------8

Mounting the Frame Arms ------------------------------------------11

Mounting the Airframe ---------------------------------------------13

Setting Up the Landing Gear ----------------------------------------14

Mounting the Propellers -------------------------------------------15

Mounting of the Parts ----------------------------------------------16

Parts Bom -------------------------------------------------------------19

Page 3: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing

3

Product Profile :

Thank you for purchasing the Products . The MH1100 is designed for

professional aerial photography and cinematography . Its good features include

portable , flight stability , simple maintenance , etc . Self-locking foldable and fast

disassembly arms , electronic retractable landing gear , vibration dampers , portable

propellers , portable GPS holder and integration circuit boards allow for more easier

to fly and install. Please read this manual carefully before assemble this product . Be

sure to retain the manual for future reference , routine maintenance and tuning .

Disclaimer :

1.R/C Aircraft,including the MH1100 are not toys.R/C Aircraft utilize various high

technology products and technologies to provide superior performance. Improper

use of this product can result in serious injury or even death. make sure to be

responsible for the safety of your own the others.

2.Manufacturer and distributors assume no liability for use loss , man-made

destroyed , and installing and disassembling did not follow the instruction of official

manuals .

3.Aircraft damage or dissatisfaction as a result of accidents of modifications are not

covered by any warranties and cannot be returned for repair or replacement. Please

contact our company and distributors for free technical consultation and parts at

discounted rates when you experience problems during operation or maintenance.

Page 4: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing

4

4.R/C Aircraft are precision electronics products susceptible to interferences from

external forces such as magnetic field and radio signal. Should the multicopter or

any onboard photographic equipment suffers loss or crash damage as result of

external magnetic or radio interferences , cannot be held liable as the cause is

beyond our control.

5.This product and manual are copyrighted with all rights reserved , No part of this

product of manual shall be reproduced in any form without the prior written consent

or authorization.

Safety Cautions :

1.Do not fly your model at crowd , Near building ,high voltage cables,or trees.

2.Flying away from the damp environment, such as a rainy day, fog day, snow day .

3.Please do not modify by self, any upgrades and maintenance, please use the parts

of Flycker catalog ; Illegal modification and overload using, cause any damages and

other life safety ,we shall not take any responsibility.

4.Operate this unit within your ability.Do not fly under tired condition and improper

operation may cause in danger.

Page 5: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing

5

Cautions Before Flight:

1.In oder to avoid accidents , Please don ’ t install propellers untill finished

calibration .

2.Prior to every flight, carefully check all parts such as blades , screws , frame , arms ,

etc; ensure thay are firmly secured and show no unusual wears.

3.Prior to every flight, carefully check all ESC signal and make sure the electric cord

have a good condition and connection tightly.

4.Operate this product within its intended design parameters, don’t overload it with

excess cargo.

5.Always keep a safe distance from the motors and propellers while they are

operating.

If you have any problems you cannot resolve, contact your dealer customer service .

Legend

Important Hints and Tips

Screw Glue

Page 6: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing

6

Tools and Materials :

Optional Equipment :

Multi-rotor Size :

Shear Hex screwdriver

(H4mm~H1.5mm)

Hexagonal spanner

(H4mm~H1.5mm)Knife

Soldering station Screw glueDiagonal cutting nippers

Wire straps

Remote control

(more than 7 channels , aircraft /

multi-rotor system)

Receiver

(more than 7

channels)

Flight controller

(GPS Function ,

V-cycle , the model

can drive 8 motors)

Li-Po Battery

6S-22.2V

10000mAh~22000mAh

Page 7: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing

7

Page 8: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 9: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 10: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 11: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 12: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 13: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 14: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 15: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 16: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 17: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 18: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 19: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing
Page 20: Explorer Series Multi-rotor helis MH1100 · Should the multicopter or ... 1.Setting a 2-position RC transmitter switch (default setting is OK ) as the control input for the landing