Experience with China Lexia 3 on Mitsubishi – disable TPMS, DRL, Seatbelt warning

Mitsubishi owner review on China Lexia 3 diagnostic tool

I recently got a China Lexia 3 diagnostic tool with Diagbox and PP2000. Paid $130 including shipping through DHL. It took about 5 days to arrive. The device itself seems quite solid, heavy and reliable. See first picture below:

I hooked the Lexia 3 V48 up my Outlander, and had no problem turning on some options including the speeding warning - it kicks in at about 117 kmh - IMHO it is quite useful. I have been playing with it for days and it is able to do the things I need it to do. Below are some things that work:

- TPMS disabling/enabling (Lancer X/EVO X too)- Fog light independently to low beams- Welcome courtesy lighting- Auto door locking / unlocking- Factory security system activation (for those not having it)- All Customer options available thru MMCS (rear wiper speed, pause and mode, locking/unlocking settings, light sensoradjustment etc)- Two stage Auto lights (twilight mode) - 4 hours trip computer autoreset disabled- 120+ km/h speed warning- Remote sunroof closing

- Rear fog lights activation- DRL mode change/deactivation- Passenger seatbelt warning mode- Low washer fluid warning- 0.1MHz FM radio step, CT time broadcast, instant RDS display (2010-2013 6CD head units only).- Service notification deactivation

Things that (yet) do not:- Remote windows closing- Door autolocking once keyless transmitter is out of the car- ECO indicator- ESS 

Now it is available from many sources. Mine is from here: http://www.diyobd2.fr/wholesale/lexia-3-pp2000-citroen-peugeot-diagnostic-interface.html.http://www.diyobd2.fr/wholesale/lexia-3-pp2000-citroen-peugeot-diagnostic-interface.html

http://www.diyobd2.fr/producttags/elm327

Always save c:\OUD folder in case you need to restore your distorted settings.

You might be not able to restore proper values using DiagBox (yet remote rescue session is possible as a last resort, PM me for details).

Why I bought the cable

I did some research before purchasing it. The cable is actually a Peugeot/Citroen diagnostic tool? Because both these brands had or still have models which are rebranded versions ofMitsubishi Outlander/RVR so they made their tool to support those Mitsubishi clones.

1. This is device capable of changing some ETACS settings, similar (but not identical) to dealers MUT-III. Mitsubishi ETACS has over 2 hundred settings to play with!2. It can be used with Lexia/PP2000 software or DiagBox or ETACS Decoder - best ETACS management tool ever! Seriously.3. Using it you can do many things your dealer is unable to.4. It is not an OBDII reader and cannot be replaced with ELM327.