Experience good performance affordable cost · Experience good performance with affordable cost...
5
CertaFlux LED CertaFlux SLM holders Gen1 Datasheet Experience good performance with affordable cost CertaFlux SLM H G1 CertaFlux SLM continues to offer best value for money products from Philips for spotlight/track light solution. CertaFlux SLM holders are designed to further helps our customers to easy use our CoB, providing a reliable point system. It includes 3 sizes and 2 connecting ways, fully applicable to our current CertaFlux SLM ranges. Key features and benefits Cost effective SLM CoB Complete portfolio Flexibility to select a different lumen output between 500lm to 5800lm System approach (CoB + Holder + Driver) Flexibility to design Luminaire performance (high efficacy or high output) Up to 50,000 hours lifetime @ Tc-nom and I-life December 2018
Transcript of Experience good performance affordable cost · Experience good performance with affordable cost...
CertaFlux
LEDCertaFlux SLMholders Gen1
Datasheet
Experience good performancewith affordable costCertaFlux SLM H G1CertaFlux SLM continues to offer best value for money products from Philips for spotlight/track light solution.CertaFlux SLM holders are designed to further helps our customers to easy use our CoB, providing a reliable pointsystem. It includes 3 sizes and 2 connecting ways, fully applicable to our current CertaFlux SLM ranges.
Key features and benefitsCost effective SLM CoBComplete portfolioFlexibility to select a different lumen output between 500lm to 5800lmSystem approach (CoB + Holder + Driver)Flexibility to design Luminaire performance (high efficacy or high output)Up to 50,000 hours lifetime @ Tc-nom and I-life
December 2018
Ordering data
Commercial product name 12NC Box quantityCertaFlux SLM H PI 1313 G1 929001431680 20
CertaFlux SLM H PI 1515 G1 929001431780 20
CertaFlux SLM H PI 1818 G1 929001431880 20
CertaFlux SLM H 1818 G1 929001431980 20
This product is available in the following options. It is possible to combine these with the CoBs in the CertaFlux portfolio.
2 Datasheet - CertaFlux SLM holders Gen1 December, 2018
Holder compatibility
Electrical characteristics
Parameter Min Typ Max UnitNumber of modules in series per chain 1SLM modules should not be connected in parallel so only one chain per driver is allowed.
Wiring
Specification item Value Unit ConditionInput wire cross-section 0.5...0.75 mm2 solid, fused, stranded diameter ≤1.3mm
18...20 AWG solid, fused, stranded diameter ≤1.3mm
Input wire strip length 7...8 mm
Use copper conductors only
Mechanical characteristics
CertaFlux SLM H PI 1313 G1
Parameter Min Typ Max UnitWidth 29.76 30 30.24 mm
Height 3.4 3.6 3.8 mm
CertaFlux SLM H PI 1515 G1
Parameter Min Typ Max UnitWidth 31.76 32 32.24 mm
Height 3.4 3.6 3.8 mm
3 Datasheet - CertaFlux SLM holders Gen1 December, 2018
CertaFlux SLM H PI 1818 G1
Parameter Min Typ Max UnitWidth 34.76 35 35.24 mm
Height 3.4 3.6 3.8 mm
CertaFlux SLM H 1818 G1
Parameter Min Typ Max UnitWidth 34.76 35 35.24 mm
Height 3.4 3.6 3.8 mm
Absolute ratings
Parameter Min Max UnitCurrent through the LED module (I-max) 1600 mA
Working voltage 60 Vdc
4 Datasheet - CertaFlux SLM holders Gen1 December, 2018
© 2018 Signify Holding, IBRS 10461, 5600VB, NL. All rights reserved. The information provided hereinis subject to change, without notice. Signify does not give any representation or warranty as to theaccuracy or completeness of the information included herein and shall not be liable for any action inreliance thereon. The information presented in this document is not intended as any commercial offerand does not form part of any quotation or contract, unless otherwise agreed by Signify.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All othertrademarks are owned by Signify Holding or their respective owners.
21/12/2018
www.philips.com/oem
