Expansion Joint Model
of 1
Transcript of Expansion Joint Model
-
8/13/2019 Expansion Joint Model
1/1
ted: 01/08/13 16:35:41 model: I:\001_MISC\228_DSW\06-MECHANICAL\07.STRESS ANALYSIS\TEST\BROMINE TEST FOR 20INC PIPE
From 10 To 11 DX= 254.000 mm.
RIGID Weight= 787.57 N.
RESTRAINTS
Node 10 ANC
------------------------------------------------------------------------------
From 11 To 12 DX= 222.250 mm.
EXPANSION JOINTAxial K= 8,047 N./cm. Trans K= 46,398 N./cm. Tors K= 145,566 N.m./deg
Eff Dia= 435.607 mm.
-----------------------------------------------------------------------------
From 12 To 13 DX= 254.000 mm.
RIGID Weight= 787.57 N.
-----------------------------------------------------------------------------
From 10 To 14 DX= 730.250 mm.
RIGID Weight= .00 N.
RESTRAINTS
Node 14 X Cnode 13
Node 14 RZ Cnode 13
Node 14 RY Cnode 13
-----------------------------------------------------------------------------
From 13 To 20 DX= 3,269.750 mm.-----------------------------------------------------------------------------
X
Z
TIE ROD
MODELING
