Exor new product presentation 2006

Enhancing the power of theGalil Motion Controller using

Exor UniOP HMIsApril 2006April 2006

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

[email protected]

Sold & Serviced By:

Enhancing the power of the Galil Controller

Start with a great motion controller

1. Add HMI with built-in gateway to allow the Galil to intelligently communicate with other hardware as a system with 175+ drivers.

2 . Data acquisition with UniNET and OPC Server.

3. Expand the Galil I/O by adding 16 in and 16 out to HMI.

4. Add a PLC/embedded logic controller to enhance the power of the Galil Motion Controller.

5. Many choices of hardware configurations, 60+. A solution that will fit your need and cost requirements.

6. Windows CE.NET 4.2TM as an optional operating system.

7. Multi-language support including Asian characters.

8. Optimized hardware for high volume applications.ELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

[email protected]

Sold & Serviced By:

Enhancing Communication and Connectivity



[email protected]

Sold & Serviced By:

Connect Galil to these other controllers for intelligent communications



[email protected]

Sold & Serviced By:

Free Gateway functionality

Dual Driver Communications plus data acquisition

UniOP Panel PC Port

PLC Port

Aux Port

Controller

Communication

Module SCM11

Ethernet TC

P/IP

Client Application

UniNet OPCServer

Ethernet interface

175 X 175 = 30,625 combinations

“give or take a few”



[email protected]

Sold & Serviced By:

Collect Production Data with UniNET and OPC

UniOP can act as a data concentrator for many brands and different types of controls. You can work with a single protocol, our free OPC Server.

UniNET on Ethernet



[email protected]

Sold & Serviced By:

Sharing information with UniNETUniOP can act as a data concentrator for multiple HMIs to a single controller.

UniNET serially or on Ethernet



[email protected]

Sold & Serviced By:

Modularity at the Roots

Display Subsystem, Touch/Keypad

Power Supply System Interfaces

CPU Subsystem Communication

Interfaces

Modular architecture• Products are built upon common subsystems• Faster time to market for new models• Optimization of the manufacturing flow



[email protected]

Sold & Serviced By:

Modular Communication Architecture

All UniOP models can accept one optional TCM/SCM communication module.

TCM/SCM modules and protocols are compatible with the complete range of products

Easy access from rear of units



[email protected]

Sold & Serviced By:

Communication Modules

Simatic S7 MPI

Interbus

Profibus DP 12 Mb

DeviceNet

CANopen

Ethernet

Profibus DP 1.5 Mb

LonWorks

Compatible with allUniOP models!

... and more

EIB



[email protected]

Sold & Serviced By:

The Ethernet Modules

TCM10Ethernet 10baseT

10 Mbit

UDP/IP protocol

Supports UniNET

Can be used for Ethernet based protocols

SCM11Ethernet 10baseT10 MbitTCP/IP and UDP/IP protocolsSupports UniNETCan be used for Ethernet based protocolsIncludes PLC functionality



[email protected]

Sold & Serviced By:

UniOP Brings the Web to the Factory Floor

The SCM10 Web Enabled Smart Controller

• Plug-in interface for control applications• Compatible with all UniOP products• Web-enables UniOP panels• Includes 10base-T Ethernet

• Remote monitoring and controlling• Home surveillance• Remote access to legacy control applications• Exporting local data to the Web



[email protected]

Sold & Serviced By:

Dual Driver Communications

This is how easy it is to set up…



[email protected]

Sold & Serviced By:

Panel setup for Dual Driver

1.

2.



[email protected]

Sold & Serviced By:

Pick your protocols and set up communications

1.

2.

3.

4.



[email protected]

Sold & Serviced By:

Insert a Data Transfer Job

1. 2.

3. 4.



[email protected]

Sold & Serviced By:

UniNET & OPC Server

This is how easy it is to set up…



[email protected]

Sold & Serviced By:

OPC “Laptop” Setup



[email protected]

Sold & Serviced By:

“OPC Server” Setup



[email protected]

Sold & Serviced By:

OPC “UniOP” Setup



[email protected]

Sold & Serviced By:

Done! Live Excel Data Update



[email protected]

Sold & Serviced By:

Put control in your HMI “HMIcontrol”



[email protected]

Sold & Serviced By:

Add Control to any UniOP

PLC Coprocessor Module: high performance control without loading the HMI CPU

Local I/O modules

Fieldbus interfaces for remote I/O. The easiest way to distribute the control system

Compatible with all UniOP panels

Adds full IEC61131-3 programming capability to UniOP



[email protected]

Sold & Serviced By:

Add Control Capability to UniOP

Just plug a control module and an I/O module into the HMI to make it a true HMIcontrol system



[email protected]

Sold & Serviced By:

Local Integrated I/O

Local inputs/outputs

A number of input and outputs, digital and/or analog and/or high speed pulse inputs can be integrated directly in the UniOP panels. Examples: UIM03 (32 I/O) or UIM05 (44 I/O) internal I/O boards. ELECTROMATE


[email protected]

Sold & Serviced By:

Remote Fieldbus I/O

Remote inputs and outputs

A fieldbus connection can be used to control the remote I/O. The fieldbus interface is integrated in the SCM PLC module.



[email protected]

Sold & Serviced By:

Local and Remote I/O



You can have both.



[email protected]

Sold & Serviced By:

Connectivity and Local and Remote I/O

This allows for distributed control architectures.This connection does not interfere with embedded PLC performance.

Connection to external

PLC or Controller





[email protected]

Sold & Serviced By:

The SCM03-C / SCM03 PLC Module

Compatible with all UniOP panels

High-performance 32 bit MIPS CPU (IDT 3041, 25 MHz clock, 2.5 KB cache)

Up to 2 M x 16 bit Flash EPROM

Downloadable firmware

Up to 4 M x 16 bit SDRAM

512 bytes EEPROM for system parameters

Optically-isolated RS-485 or CAN interface; interface to the Aux Port

15000 gate FPGA for logic system services including communication coprocessors

CAN master interface

Supports either CoDeSys or ISaGRAF



[email protected]

Sold & Serviced By:

Local I/O Boards

16 digital inputs 24V16 relay outputs 1AOptical insulation

20 digital inputs 24V12 digital outputs 0.5A4-8 programmable analog inputs4 programmable analog outputs1 RTD input

Use some of the digital inputs for 4 channels of quadrature high speed pulse input at 1MHz.

UIM03

UIM05



[email protected]

Sold & Serviced By:

HMIcontrol with CoDeSys

High-performance control solutions for UniOP

Full IEC 61131-3 with five programming languages

Native compiler for high speed run-time execution

Requires SCM03-C or SCM11-C

140 Companies have chosen to use CoDeSys as their development software



[email protected]

Sold & Serviced By:



[email protected]

Sold & Serviced By:

Software Designed for Simplicity

• One Windows-based software programs all the models

• The easiest to use software• State-of-the-Art interface and

technology• Pixel and vector graphics with High

Colors support (64,000 colors)• Ethernet communication• Dual-driver communication• Tag dictionary• Export/Import tag information• Far East language support• Export/Import text information• Video input



[email protected]

Sold & Serviced By:

The UniOP Designer 6



[email protected]

Sold & Serviced By:


Support vector graphics with pixel level alignment.

Complete symbol library

User-defined object library

64,000 color support (16 bit)

Touchscreen programming with pixel level alignment



[email protected]

Sold & Serviced By:


Tag Dictionary with import capability

Easy conversion of applications between different controllers



[email protected]

Sold & Serviced By:


Import/export text tags for multi-language

Supports UniCode and Far East font scripts



[email protected]

Sold & Serviced By:

Many Exor UniOP Hardware Choices



[email protected]

Sold & Serviced By:

Exor UniOP in the Real World



[email protected]

Sold & Serviced By:

Custom embeddedsolutions

Industrial Monitors & Computers

The UniOP Product Range

Scalability and performancein a large family of compatible products

3.8”

15.1”



[email protected]

Sold & Serviced By:

Basic Product Environmental Ratings

Environmental Specifications

Operating temperature

0 to 50 C for text 0 to 45 C for touchscreen -20 to 60 C available as option for select models

Storage temperature -20 to +70 C Operating and storage humidity 5 to 85% non condensing

Protection class IP65 / NEMA4X Vibration IEC 68-2-6

Shock IEC 68-2-27 Keyboard reliability > 3 millions operation

Touchscreen reliability > 1 million operations



[email protected]

Sold & Serviced By:

The Quality System of Sitek S.p.A. conforms to

UNI EN ISO 9001 - 2000

CEEN50081-2 and EN 50082-2 for installation in industrial and residential environments

UL / cULUL1950UL508Class I Div II (Hazardous Locations)



[email protected]

Sold & Serviced By:

120x32 semi-graphical display

Downloadable fonts, scalable text

IP65 / NEMA 4X front panel protection

Function keys with slide-in legends & Programmable LEDs

Battery backed Real Time Clock and Recipes on ePAD 03/05

ePAD 03/05 Dual-driver capability with option card

Available with –20 to 60 degress C spec.

Compatible with HMIcontrol and fieldbusI/O.

The lowest-cost Ethernet compatible operator panels, some with a full numeric keypad

ePAD03, ePAD04, ePAD05, ePAD06



[email protected]

Sold & Serviced By:

eTOP02, eTOP03

3.5” 1/4 VGA (320x240 pixel) TFT color graphical display3.8” 1/4 VGA (320x240 pixel) monochrome graphical displayAnalog resistive touch screen Long-life white LED backlightMultilanguage project capabilityBattery backed Real Time Clock and RecipesDual-driver capability with option cardIP65 / NEMA 4X front panel protectionCompatible with HMIcontrol and fieldbus I/O.The lowest-cost Ethernet compatible color touchscreen



[email protected]

Sold & Serviced By:

CP10G-04

4 lines by 20 characters120x32 pixel monochrome LCD graphical displayScalable fonts Battery backed Real Time Clock and Recipes512 KB Flash memory12 user function keys with slide-in legends12 user defined LEDsDual-driver capabilityCompatible with HMIcontrol, local I/O and fieldbus I/O.



[email protected]

Sold & Serviced By:

ePALM10

3 Position “dead-man / live man”switch to meet new robotic standard.

120x32 graphical display, up to 8 lines by 20 characters.

Includes hard wired Emergency Stop button.

IP65 front panel protection

Highly visible transflective LCD display.

27 key keypad with tactile feedback

Scalable text, Downloadable fonts.

Connection to industrial bus systems

Large memory, 512KB Flash

Serial, support for DeviceNet, CANopen and Profibus DP at 1.5MB, and HMIcontrol



[email protected]

Sold & Serviced By:

High Speed ePALM Products

The increased interest in handheld solutions has generated the need of solutions using fieldbus and Ethernet

ePALM10 for Profibus DP

Network speed up to 12 Mb

Can be used only as terminal node

ePALM10 for Ethernet

Compatible with TCM10 and SCM11

Firmware supports Ethernet connectivity



[email protected]

Sold & Serviced By:

eTOP05/eTOP12, small touch screen

5.6” 1/4 VGA (320x 240 pixel) monochrome graphical displayAnalog resistive touch screenLong-life white LED backlight (eTOP05)Connection to various fieldbus and Ethernet systems with plug-in modules32MB Flash memory on removable mediaIP65 / NEMA 4X front panel protectionCompatible with HMIcontrol and fieldbus I/O.Programs with Designer software as old as 5.08



[email protected]

Sold & Serviced By:

eTOP11, small color touch screen

5.6” 1/4 VGA (320x 240 pixel) STN, 16 color graphical display

Analog resistive touch screen

CCFL backlight

Connection to various fieldbus and Ethernet systems with plug-in modules

32MB Flash memory on removable media


Compatible with HMIcontrol, local I/O and fieldbus I/O.



[email protected]

Sold & Serviced By:

The B Generation, faster and more powerful

200 MHz, 64 bit MIPS processor

64,000 / 16 bit colors are supported in all TFT displays. Supports all imported images. Photorealistic images are stunning.

Video Input Module support - Display up to four independent and simultaneous images (video cameras and/or a computer) using the optional external VMO10 video input module. Images can be easilyresized and cropped.

TFT models support backlight dimming. Reduce the brightness of the screen for better readability and user comfort. The brightness can be reduced by a factor of about 50.

32MB of internal, non-removable, panel flash memory. Panel Memory will contain everything currently included in the SSFDC card. Increase the reliability of the panel when working in harsh environments. Hardware still includes a Flash Card Socket for optional 32 MB flash cardUpdate application and firmware in much the same way as current product. Removable Flash Card will no longer be part of the standard hardware.



[email protected]

Sold & Serviced By:

eTOP10B, small color touch screen

5.6” 1/4 VGA (320x 240 pixel) TFT, 64,000 color graphical display


CCFL backlight


32MB Flash memory


Compatible with HMIcontrol, local I/O and Fieldbus I/O.

Supports Video Input Module



[email protected]

Sold & Serviced By:

eTOP20B, larger touch screen

7.5” TFT 64,000 color display with VGA (640x480 pixels) resolution.


CCFL backlight


32MB Flash memory


Compatible with HMIcontroland Fieldbus I/O




[email protected]

Sold & Serviced By:

eTOP33B, the standard size for touch screens

10.4” TFT color display with VGA (640x480 pixels) resolution.

450 cd/m2 brightness


CCFL backlight


32MB Flash memory


Compatible with HMIcontrol, Local I/O and Fieldbus I/O




[email protected]

Sold & Serviced By:

eTOP40B & eTOP50B, Large and very large touch screens

12.1 TFT (800x600) and 15.1”TFT (1024x768) color displays.


CCFL backlight


32MB Flash memory


Compatible with HMIcontroland Fieldbus I/O




[email protected]

Sold & Serviced By:

ePAD33B, ePAD33B-T, ePAD32B

10.4” TFT color display with VGA (640x480 pixels) resolution.


Available with touch screen option

Connection to industrial bus systems and Ethernet (otional plug-in modules)

Compatible with HMIcontrol and local I/O subsystems

Large memory size (8MB Flash) with removable media

IP65 front panel protection



[email protected]

Sold & Serviced By:

eSOP39, eTOP39B Hi-Bright / Ultra Hardened

10.4” VGA (640x480 pixels) resolution

Advance Transflective color display for sunlight readability

NFI (Near Field Imaging) touch screen (ultra-hardened)

Extended temperature range 55 degrees C (ultra-hardened)

Connection to fieldbus and Ethernet systems

Compatible with HMIcontrol, local I/O and fieldbus remote I/O

Available with Windows CEELECTROMATE


[email protected]

Sold & Serviced By:

eSOP39

Unique Hardware Configuration, special order



[email protected]

Sold & Serviced By:

eTOP19B, Hi-Bright

5.6” TFT color display with ¼VGA (320x240 pixles) resolution




32MB Flash memory


Compatible with HMIcontrol, local I/O and Fieldbus I/O.




[email protected]

Sold & Serviced By:

The Video Input Option

Ideal for: Diagnostic and surveillance in building automation, home automation, maritime applications

Works with:

eTOP10B

eTOP19B

eTOP20B

eTOP33B

eTOP39B

eTOP40B

eTOP50B

ePAD33B

ePAD33B-T

PHILIPS

PHILIPS

PHILIPS



[email protected]

Sold & Serviced By:

UniOP Dual-Module Option

Allows using two TCM / SCM modules in one panel

Available on T2000 or later versions

Available for special orders



[email protected]

Sold & Serviced By:

Ready for OPEN Systems

The same rugged UniOP hardware can be used to run the most popular open operating systems for industrial applications

- Windows CE.NET 4.2TM

- Built in USB Port

- Built in Ethernet Port,

option for second one



[email protected]

Sold & Serviced By:

eTOP105

The lowest cost UniOP workstation for Windows CE. The eTOP105 matches the performance of our other Windows CE workstations.

It is the same 5.6" display used in the eTOP05.

The system includes Windows CE.NET 4.2TM



[email protected]

Sold & Serviced By:

eXPAC ™ a product from the UniOPEN product development group



[email protected]

Sold & Serviced By:

eXPAC ™ - EXOR Programmable Automation Controller

eXcellent I/O Mix and Connectivity(16) 24 VDC Digital Inputs(1) 24 VDC Digital and (16) 3A @ 120 VAC Relay Outputs(4) 12-bit Analog Inputs and (4) 12-bit Analog Outputs(1) Flow sensor or high speed counter input(1) Expansion module slot for up to 16 additional Digital or 8 additional Analog I/O points(1) CANopen port and (1) Ethernet port(3) Serial ports with support for all 185+ UniOP device drivers plus modem connectivity High Speed communications via, CANopen, MODBUS TCP/IP, and others.

eXcellent Power and Flexibility• IEC 61131-3 Programming with CoDeSys or ISaGRAF• HMI Programmed with Designer Software• Web Enabled remote access with embedded web server• Wireless Internet connectivity via cell phone GPRS• 5.6” color or monochrome, ¼ VGA graphical touch screen• 16MB Flash for HMI/PLC program, 128MB Flash for Data Logging• 120x32 pixel / 4 line x 20 character graphical text display• Private Labeling required, 50 piece minimum, one time artwork fee

List: $1,495 (mono)List: $1,195

HMI + PLC + Combo I/O+ WebServer + Ethernet+ CANopen + Gateway

+ Wireless Internet+data logging

+ more…



[email protected]

Sold & Serviced By:

Wireless Internet Access



[email protected]

Sold & Serviced By:

Expanded “campus style” Wireless Internet Access



[email protected]

Sold & Serviced By:

UniOPEN



[email protected]

Sold & Serviced By:

UniOPEN - - - What is possible?

Customer needed a very small HMI with integrated PLC, 32 I/O and one servo axis control in a 1/16 DIN housing…

We resolved the problem by applying the UniOPEN standard components into a semi-custom solution that exactly fit the customers requirements.



[email protected]

Sold & Serviced By:

UniOPEN - - - What is possible?

Standard Solution UniOPEN Solutionvs.

HMI

PLCw/I/O

ServoMotion

FieldBus

$400

$300

$700

UniOPEN

FieldBus

$900

20 Heads per machine for a total savings of $10,000

per machine

$1400+ $900vs.ELECTROMATE


[email protected]

Sold & Serviced By:



[email protected]

Sold & Serviced By:

Enhancing the power of the Galil Controller

1 . Add built-in gateway to allow the Galil to intelligently communicate with other hardware as a system with 175+ drivers.

2 . Data acquisition with UniNET and OPC Server.

3. Expand the Galil I/O by adding 16 in and 16 out to HMI.

4. Add a PLC/embedded logic controller to enhance the power of the Galil Motion Controller.

5. Many choices of hardware configurations, 60+. A solution that will fit your need and cost requirements.

6. Windows CE.NET 4.2TM as an optional operating system.

7. Multi-language support including Asian characters.

8. Optimized hardware for high volume applications.ELECTROMATE


[email protected]

Sold & Serviced By:

Thank you!



[email protected]

Sold & Serviced By:

Exor new product presentation 2006

Technology

Transcript of Exor new product presentation 2006