exhaustfans_2
-
Upload
fredy-sameone -
Category
Documents
-
view
50 -
download
6
description
Transcript of exhaustfans_2
SF52 EXHAUST FAN
CANARM LTD. - Corporate Office2157 Parkedale Ave., Brockville, ONCanada K6V 5V6Tel: (613) 342-5424 Fax: 1-800-263-4598
CANARM LTD. - USA Warehouse808 Commerce Park Drive
Ogdensburg, New York, USA 13669Tel: 1-800-267-4427 Fax: 1-800-263-4598
Web Site: www.canarm.comE-Mail: [email protected]
Arthur Manufacturing Facility#7686 Concession 16, RR 4 Arthur, ON
Canada N0G 1A0Tel: (519) 848-3910 Fax: (519) 848-3948
Subject to Change without notice. Printed in Canada - 02/11
SF Series
Features
• 52” blade diameter
• Galvanized steel construction
• Super strong heavy duty center post design
• Poly inside shutters - tie bars ensure consistent
open/close
• Special order motors available - call for details
Warranty
• 1 year on all components
General Information
The new 52” high performance SF52 fans are designed for use in Poultry, Dairy and Greenhouse applications.The SF52 will work equally well in either tunnel or cross ventilated buildings.
These rugged, well built fans feature Canarm's new “CENTER POST” construction with a heavy, hot dipped galvanized steel post supporting the bearing assembly and blade.The SF52 features a traditional inside shutter design.Available with 1.0 HP & 1.5 HP motor options for around the world.
Rugged • Low Cost • High cfm • Low Maintenance
Specifications
cfm cfm/w cfm cfm/w amp cfm cfm/w
SF52 1.0 27,900 24.2 26,500 21.8 5.87 25,000 19.7 07154
SF52HE 1.0 27,230 26.0 25,500 23.1 5.38 24,000 20.9 07150
SF52H 1.5 -- - 31,500 19.8 28,500 18.2 C06284
ReportModel # HP0.00" SP 0.05" SP 0.10" SP
Fan Dimensions
59.36656.502
64.931
60.87957.640
58.843
45.276
14.04210.347
Framing Dimensions
58.000
56.750
A
A
59 1/2”56 1/2”
45”
56 3/4”
58”
14”10 1/2”
65”
59”
61”57 5/8”
GALVANIZED SLANT WALL FANS
Subject to Change without notice.
Features
• Galvanized steel housing.
• High efficiency motors.
• Belt Fans provided with rotary belt tensioner & easy to remove rubber belt.
• Cast iron, greaseable “Air Handling” bearings.
• 2” x 2” screen guard
• 1 Year Warranty
SW36
Economical • Low Maintenance • Strong Performance
Ideally suited for Poultry, Dairy & Greenhouse Buildings.
Printed in Canada - 02/11
Motor & Tensioner
Framing Dimensions
Fan Size Width Height
36" 43" 46"
PRO
DU
CT
SPEC
IFIC
ATIO
NS
Spee
dhp
Volta
geph
shz
cfm
cfm
/wcf
mcf
m/w
amps
cfm
cfm
/w
2.51
(230
V)
1720
015
.616
200
14.0
5.13
1550
012
.9
1570
012
.815
200
12.0
5.53
1450
011
.2
Not
es:
AFR
is th
e ai
rflo
w ra
tio.
High
er A
FR in
dica
tes
bette
r per
form
ance
und
er s
tatic
pre
ssur
e an
d ag
ains
t win
d.It
is c
alcu
late
d by
divi
ding
fan
cfm
at 0
.20
stat
ic p
ress
ure
by c
fm a
t 0.0
5 sp
.Te
st re
sults
are
with
shu
tters
inst
alle
d.
TE
ST
ED
AT
Te
st
Co
de
0400
22
Belt Drive
60SW
36
160
Spec
ifica
tions
Mod
el
Num
ber
Perf
orm
ance
Direct Drive
21.0
9845
18.3
850
Mot
or
AFR
766
1
SW36
BDH
1/2
115/
230
0.10
" SP
rpm
0.00
" SP
0.05
" SP
0.73
Not
e: W
ind
has
a si
gnifi
cant
effe
ct o
n ex
haus
t fan
s. A
10
mph
win
d cr
eate
s a
0.05
" pre
ssur
e ag
ains
t the
fan.
A 2
0 m
ph w
ind
crea
tes
0.20
" pre
ssur
e an
d 30
mph
a
0.45
" pre
ssur
e.
Thes
e pr
essu
res
are
in a
dditi
on to
the
stat
ic p
ress
ure
in th
e bu
ildin
g. W
ind
bloc
ks o
r hoo
ds s
houl
d be
incl
uded
in a
ll de
sign
s w
here
fans
will
be s
ubje
cted
to w
inds
abo
ve
10 m
ph.
36"
sing
le
1.0
230
11,3
2323
.810
,628
Su
bje
ct t
o C
han
ge
wit
ho
ut
no
tice
.P
rin
ted
in C
anad
a -
02/1
1
CAN
ARM
LTD
. -
Cor
pora
te O
ffic
e21
57 P
arke
dale
Ave
., Br
ockv
ille, O
NCa
nada
K6
V 5V
6Te
l: (6
13) 3
42-5
424
Fa
x: 1
-800
-263
-459
8
CAN
ARM
LTD
. -
USA
War
ehou
se80
8 Co
mm
erce
Par
k Dr
ive
Ogd
ensb
urg,
New
Yor
k, U
SA
1366
9Te
l: 1-
800-
267-
4427
F
ax: 1
-800
-263
-459
8W
eb S
ite: w
ww.
cana
rm.c
omE-
Mai
l:ag
sale
s@ca
narm
.ca
Arth
ur M
anuf
actu
ring
Fac
ility
#768
6 Co
nces
sion
16,
RR
4
Arth
ur, O
N
Cana
da
N0G
1A0
Tel:
(519
) 848
-391
0
Fax
: (51
9) 8
48-3
948
PLASTIC WALL EXHAUST FANSGood Performance • Dependable • Great Value
Ideally suited for Swine and Poultry buildings.
Accessories
• Low air restriction 12” to 24” weather hoods. Most hoods restrict 20 to 35% of air flow, our design restricts less than 10%.• Insulated 16” to 36” winter inserts. R8 insulation value and unique double seal protect against heat loss.• Performance enhancing cones in durable black polyethylene are available for 24” and 36” fans.
PLF Series
Features
Subject to Change without notice. Printed in Canada - 02/11
High Volume 36” Model - 16,000 cfm - Tested at BESS Labs
*See detailed product specifications for all products including the high volume 36” model on back
*See product specifications on back for colour and size availability
Easily Removable Shutters
Warranty
• 5 years on plastic housing
• 1 year on all other components
Cones HoodsWinter Inserts
Platform Mount
• 12” to 36” Sizes
• Molded impact resistant black polyethylene housings with UV prohibitors.
• Standard base mount motors are easily replaced.
• Easy to remove shutter with welded steel frame and aerodynamic PVC louvers are held in place by a stainless spring steel pin and is virtually indestructible.
• Powder coated exhaust guard.
• Corrosion proof airfoil polypropylene blades on 12” to 24” sizes.
• 36” fan has a galvanized blade.
• Heavy duty motors are totally enclosed, ball bearing, high efficiency dual voltage, single phase, 60 Hz (PLF36-H is 230 volt only).
Guaranteed Performance
Product Specifications
type spd volt hp cfm cfm/w cfm cfm/w amps cfm cfm/w
12"
Leeson PLF12-EVDL 210336V 1625 65 N 1300 7.1 1150 6.5 1.06 600 3.6 0.30 15" Sqr
16"
Leeson PLF16-EVDL 210365V 1625 72 N 2600 9.3 2350 8.7 1.39 2150 8.0 0.54 19.25" Sqr
18"
Leeson PLF18-FVDL 210389V 1625 75 N 3450 10.1 3150 9.5 1.69 2900 8.7 0.65 21.25" Sqr
210473V N 5300 13.1 4800 11.9 1.79 4250 10.7 0.66
210479V Y 6000 14.5 5550 13.4 1.86 5000 12.0 0.61
210461V N 5800 10.7 5400 10.0 2.41 4900 9.2 0.75
210467V Y 6200 11.5 5850 10.7 2.41 5450 10.1 0.77
210557 N 11050 19.8 10150 17.0 2.92 9250 14.6 0.70
210558 Y 11700 21.7 10850 19.0 2.77 9700 15.8 0.66
02198* N 14320 14 13500 13.0 4.53 12500 11.9 0.79
02199* Y 15920 16.4 15170 15.3 4.36 14100 13.8 0.78
Notes:
TESTED
AT
Test
Code
PLF24-MStai
nles
s St
eel
Plas
tic
81
75
PLF24-GVDL 1625
1100
Gal
vani
zed
1.0230
40.25" Sqr
PLF36-MP
36"
sing
le
1/2
AFR is the airflow ratio. Higher AFR indicates better performance under static pressure and against wind. It is calculated by dividing fan cfm at 0.20 static pressure by cfm at 0.05 sp.Test results are complete with cone where indicated. All tests completed with shutters installed.Amps indicated are actual at 230 volts. When determining amp load for variable speed, add 20% to listed numbers.Amp loads for 115 volt supply will be approximately double.* Certified performance by BESS Labs, University of Illinois
75
75
850
850PLF36-H*
Gal
vani
zed
0.00" SP 0.05" SPrpm
DIR
ECT
1/4
Canarm
Canarm
115/
230
dual
vol
tage
24"
Leeson
27.25" Sqr
ModelShutter Frame
Blade mat'l
0.10" SP
RoughOpeningRequired
Performance
AFRDbA
coneMotor
Specifications
Leeson
1/3
varia
ble
Canarm guarantees the performance of our fans. All fans with test numbers will perform as indicated when properly
maintained (reports are available upon request). Our fans are tested in our AMCA fig 15 test chamber. The test chamber
was designed and built to exacting AMCA/ASHRE standards for Canarm. A regimented calibration and verification schedule
is followed. Be assured, Canarm fans provide the performance you require and expect.
CANARM LTD. - Corporate Office2157 Parkedale Ave., Brockville, ONCanada K6V 5V6Tel: (613) 342-5424 Fax: 1-800-263-4598
CANARM LTD. - USA Warehouse808 Commerce Park Drive
Ogdensburg, New York, USA 13669Tel: 1-800-267-4427 Fax: 1-800-263-4598
Web Site: www.canarm.comE-Mail: [email protected]
Arthur Manufacturing Facility#7686 Concession 16, RR 4 Arthur, ON
Canada N0G 1A0Tel: (519) 848-3910 Fax: (519) 848-3948
PLASTIC WALL EXHAUST FANS
Subject to Change without notice. Printed in Canada - 02/11
Note: Wind has a significant effect on exhaust fans. A 10 mph wind creates a 0.05” pressure against the fan. A 20 mph wind creates 0.20” pressure and 30 mpha 0.45” pressure. These pressures are in addition to the static pressure in the building. Wind blocks or hoods should be included in all designs where fans will besubjected to winds above 10 mph.
FIBERGLASS FANS
FGI Series
Features
• The patented design provides excellent performance without a cone.• All fans are supplied completely assembled and are tested before shipping.• Chop & Spray design with smooth inside for improved cleaning.
• Self draining, sloped housing is quick and easy to clean reducing maintenance costs.• T-Mount belt drive system provides quick, easy access to motor & blade.
• Belt drive units are supplied complete with belt tensioner and easily accessible, highquality rubber belt.
• All fans have smooth operating, easy to clean, tie-bar poly shutters with stainless steel frame.
• 36” and 50” belt drive fans• 12”, 18”, 24” and 36” direct drive fans
*Detailed product specifications on back
Accessories
Guaranteed Performance
High Performance • Low Cost Maintenance • Low Cost InstallationIdeally suited for Poultry, Swine, Dairy and Greenhouse applications.
Canarm guarantees the performance of our fans. All fans with test numbers will perform as indicated when properlymaintained (reports are available upon request). Our fans are tested by BESS Labs or in our AMCA fig 15 test chamber.The test chamber was designed and built to exacting AMCA/ASHRE standards for Canarm. A regimented calibrationand verification schedule is followed. Be assured, Canarm fans provide the performance you require and expect.
Framing Dimensions
• Performance enhancing cone on 24” and larger fans
• FRP board winter inserts with unique double seal
• 240V cord kit accessory availableWarranty
• 10 years on housings
• 1 year on balance of fan.
Options
WIDTH
A B C D All Walls 4" & 6" Wall 9" Wall
12" 24 9 - - 17.75 18.5 18.7518" 28 9 - - 24.75 24.75 25.2524" 31 9 19 33 31 31 31.536" 34 9 21 47 43 43 43.548" 35 6 24 60 55 55 55.550" 44 9 25 64 57 57 57.5
FRAMING DIMENSIONS
FAN SIZE
FAN CONE HEIGHT
Subject to Change without notice. Printed in Canada - 02/11
• Special order black housings available.
• 3 phase motor 208-230/460 volt option available on some units.
PRO
DU
CT
SPEC
IFIC
ATIO
NS
Su
bje
ct t
o C
han
ge
wit
ho
ut
no
tice
.P
rin
ted
in C
anad
a -
02/
11
CAN
ARM
LTD
. -
Cor
pora
te O
ffic
e21
57 P
arke
dale
Ave
., Br
ockv
ille, O
NCa
nada
K6
V 5V
6Te
l: (6
13) 3
42-5
424
Fa
x: 1
-800
-263
-459
8
CAN
ARM
LTD
. -
USA
War
ehou
se80
8 Co
mm
erce
Par
k Dr
ive
Ogd
ensb
urg,
New
Yor
k, U
SA
1366
9Te
l: 1-
800-
267-
4427
F
ax: 1
-800
-263
-459
8
Web
Site
: ww
w.ca
narm
.com
E-M
ail:
agsa
les@
cana
rm.c
a
Arth
ur M
anuf
actu
ring
Fac
ility
#768
6 Co
nces
sion
16,
RR
4
Arth
ur, O
N
Cana
da
N0G
1A0
Tel:
(519
) 848
-391
0
Fax
: (51
9) 8
48-3
948
Whe
re In
dica
ted
Not
e:W
ind
has
a si
gnifi
cant
effe
ct o
nex
haus
t fan
s. A
10
mph
win
d cr
e-at
es a
0.0
5” p
ress
ure
agai
nst t
hefa
n. A
20
mph
win
d cr
eate
s 0.
20”
pres
sure
and
30
mph
a 0
.45”
pre
s-su
re.
Thes
e pr
essu
res
are
in a
ddi-
tion
to th
e st
atic
pre
ssur
e in
the
build
ing.
Win
d bl
ocks
or
hood
ssh
ould
be
incl
uded
in a
ll de
sign
sw
here
fans
will
be s
ubje
cted
tow
inds
abo
ve 1
0 m
ph.
Not
es:
AFR
is th
e ai
rflo
w r
atio
. Hig
her
AFR
indi
cate
s be
tter
perf
orm
ance
und
erst
atic
pre
ssur
e or
aga
inst
win
d. It
isca
lcul
ated
by
divi
ding
fan
cfm
at
0.20
sta
tic p
ress
ure
by c
fm a
t 0.
05 s
p.
• So
und
leve
l mea
sure
d 5
ft. in
fro
nt o
f fan
dis
char
ge.
• So
und
mea
sure
men
ts m
ade
by
Cana
rm.
• Am
ps m
easu
red
at h
ighe
st
volta
ge.
Amps
at l
ower
vol
tage
appr
oxim
atel
y do
uble
d.
Mod
el C
odes
: 3=
thre
e ph
ase,
B=
Blue
Rib
bon,
H
=hi
gh o
utpu
t, B
D=
36" b
elt d
rive,
V=
varia
ble
spee
d,C
=co
rros
ion
resi
stan
t ty
pe
hp
vo
lta
ge
ph
sh
zcfm
cfm
/wcfm
cfm
/wam
ps
cfm
cfm
/w
00
07
1Y
28
00
02
5.2
26
50
02
2.1
5.5
02
48
00
19
.50
.78
00
07
2N
25
90
02
2.5
24
40
02
0.0
5.7
02
28
00
17
.70
.79
00
06
6Y
25
90
02
7.1
24
10
02
3.5
-2
24
00
20
.50
.75
00
77
3N
24
50
02
4.5
22
90
02
1.4
-2
110
01
8.9
0.7
5
00
06
1Y
28
20
02
2.7
26
70
02
0.3
-2
52
00
18
.10
.81
00
05
6N
26
80
02
0.0
25
30
01
8.1
-2
40
00
16
.40
.82
--Y
----
----
06
00
17
N2
07
05
19
.31
94
01
17
.25
.79
17
81
01
5.1
0.7
7
--Y
----
----
06
00
17
N1
31
53
23
.211
16
21
8.8
4.3
8--
00
--
21
02
46
Y1
72
00
15
.61
62
00
14
.05
.13
15
50
01
2.9
0.8
6
21
02
45
N1
57
00
12
.81
52
00
12
.05
.53
14
50
011
.20
.85
02
20
1Y
17
01
01
8.5
16
20
01
7.5
4.9
01
53
40
15
.60
.79
02
20
0N
16
00
01
6.6
15
21
01
5.2
5.0
01
44
00
14
.00
.80
00
08
0Y
12
30
02
6.1
113
00
22
.52
.47
10
50
01
9.5
0.7
1
00
07
5N
114
00
22
.51
06
00
19
.42
.63
98
00
17
.20
.71
21
011
4V
Y6
35
01
5.3
60
00
14
.21
.92
57
50
13
.30
.80
21
01
07
VN
58
50
13
.65
60
01
3.0
1.9
35
20
01
2.3
0.7
0
--Y
--N
--Y
00
09
9N
16
50
7.4
16
00
7.1
1.1
61
55
06
.70
.89
No
co
ne
te
st a
va
ilab
le.
No
co
ne
te
st a
va
ilab
le.
36"
DIRECT DRIVE
vari
12"
Euro
1/5
115/2
30
vari
BELT DRIVE
50"g
alv
. 36"
1.0
23
0
1.0 1/3
FG
502H
23
01
60
ga
lv.
1.5
sp
ee
d
sin
gle
18"
hig
h
eff.
vari
24"
sin
gle
hig
h
eff.
1/3
115/2
30
16
06
-poly
FG
18C
V1
62
5
1
0.0
5"
SP
0.1
0"
SP
Sp
ec
ific
ati
on
s
moto
rrp
m
Pe
rfo
rma
nc
e
0.0
0"
SP
AF
R
60
Db
A
cone
bla
de
mat'l
Mo
de
l N
um
be
rS
pecif
y
* b
ulk
pa
k o
r s
ing
le
TE
ST
ED
AT
Te
st
Co
de
FG
36H
60
60
60
TB
A
TB
A
61
0F
G50B
57
8
60
0
39
7
70
1 1
50
/60
3-p
oly
FG
12C
V33
ga
lv.
34
50
76
6
85
0
co
ne
is n
ot a
va
ilab
le
80
ga
lv.
80
65
co
ne
is n
ot a
va
ilab
le
FG
36B
DH
75
ga
lv.
TB
A
115/2
30
75
50
/60
16
-po
lyF
G24C
V11
00
1.0
23
0
hig
h
eff.
hig
h
two
low
hig
h
eff.
hig
h
eff.
23
0
17
7 --
1--
63
0
hig
h
eff.
sin
gle
1/2
115/2
30
hig
h
eff.
sin
gle
FG
36
85
0
hig
h
eff.
sin
gle
1.0
23
01
60
ga
lv.
FG
50
hig
h
eff.
sin
gle
1.5
115/2
30
16
0F
G50H
STANDARD FANS
Subject to Change without notice.
Features
• Available in 8” to 36” sizes.• Single, two and variable speed models are available.• All fans use a totally enclosed, thermally protected motor.• The rugged steel welded box housing has a durable powder coated finish.• Aluminum louver shutters are supported by long life nylon bushings
(30” and 36” have PVC louvers).
• 8” - 24” models have heavy wire chrome plated OSHA guards on intake side of fan. 30” & 36” models have grey powder coated guards.
• All fans are shipped completely assembled.• 1 year warranty on all components.
Efficient • Low Maintenance • Easy InstallationCanarm’s standard fans follow a tradition of quality in design, materials and construction.
Printed in Canada - 08/11
General Information
Canarm’s standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to beefficient and economically priced. All variable speed standard fans use an energy efficient variable speed, dual voltage motor andblade combination.
To determine the proper Canarm Fan for your applications, use the following formula.Number of cubic feet in room / Number of minutes per air change = Required C.F.M. Capacity
**Example**A general office, (see chart) which requires an air change every ten minutes, would require the following fan capacity. If office is 100’ x 40’ x 10’ = 40,000 cubic feet
40,000 cubic feet / 10 minutes per air change = 4000 Required C.F.M.From the “Performance Data” section on the back of this page, you would select a fan that is rated at 4000 C.F.M. at 1/8” S.P.(Static Pressure)
Accessories
Fan Selection Chart
Assembly Hall 7 Bowling Alley 5 Engine Room 6 Gymnasium 8 Projection Booth 2
Auditorium 10 Church 15 Factory 6 Laundry 2 Summer Cooling 1
Barber Shop 6 Classroom 6 Forge Room 3 Locker Room 3 Toilet 3
Basement 8 Dance Hall 5 Foundry 4 Machine Shop 8 Transformer Room 1
Battery Room 4 Department Store 6 Garage 5 Plating Room 3 Warehouse 12
Boiler Room 1 Dry Cleaning 5 General Office 10 Pressing Room 1 Welding Shop 2
ApplicationMinutes per
Air ChangeApplication
Minutes per
Air ChangeApplication
Minutes per
Air ChangeApplication
Minutes per
Air ChangeApplication
Minutes per
Air Change
Grey Plastic Hood Galvanized Metal Hood MC type controls. 240V MC5
STANDARD FANS
Subject to Change without notice.
Fan Dimensions
Printed in Canada - 02/11
CANARM LTD. - Corporate Office2157 Parkedale Ave., Brockville, ONCanada K6V 5V6Tel: (613) 342-5424 Fax: 1-800-263-4598
CANARM LTD. - USA Warehouse808 Commerce Park Drive
Ogdensburg, New York, USA 13669Tel: 1-800-267-4427 Fax: 1-800-263-4598
Web Site: www.canarm.comE-Mail: [email protected]
Arthur Manufacturing Facility#7686 Concession 16, RR 4 Arthur, ON
Canada N0G 1A0Tel: (519) 848-3910 Fax: (519) 848-3948
Performance Data & Specifications
0.00" 0.10" 0.125" 0.25"
S8-B2 Two 8" 1600/1300 1/40 115 0.5 12 48 360/300 270/150 230/110 0 11" X 11"
S10-B2 Two 10" 1600/1300 1/40 115 0.5 13 56 690/580 590/460 570/390 0 13" X 13"
S12-E1 Single 12" 1625 1/4 115 1.8 28 63 1640 1540 1510 1390 15" X 15"
S12-E2 Two 12" 1725/1140 1/4 115 3.4 32 64 1650/1090 1550/950 1520/930 1390/0 15" X 15"
S12-EVD Variable 12" 1700 1/3 115/230 5.0/2.5 32 60 1650 1540 1510 1390 15" X 15"
S14-E1 Single 14" 1625 1/4 115 1.8 30 67 2170 2070 2030 1860 17" X 17"
S14-E2 Two 14" 1725/1140 1/4 115 3.4 34 65 2180/1350 2080/1190 2060/1160 1890/0 17" X 17"
S16-E1 Single 16" 1625 1/4 115 1.8 33 68 2370 2270 2210 2060 19" X 19"
S16-E2 Two 16" 1725/1140 1/4 115 3.4 36 69 2380/1640 2280/1490 2230/1430 2070/0 19" X 19"
S16-EVD Variable 16" 1700 1/3 115/230 5.0/2.5 36 63 2370 2270 2210 2063 19" X 19"
S18-F1 Single 18" 1625 1/3 115 4.0 37 73 3200 3090 3040 2920 21" X 21"
S18-F2 Two 18" 1725/1140 1/3 115 5.3/2.9 43 74 3200/2100 3090/1890 3040/1820 2920/0 21" X 21"
S18-FVD Variable 18" 1700 1/3 115/230 3.8/1.9 45 74 3150 3050 2980 2860 21" X 21"
S20-F1 Single 20" 1625 1/3 115 4.0 41 77 3420 3220 3170 2920 23" X 23"
S20-F2 Two 20" 1725/1140 1/3 115 5.3/2.9 45 77 3440/2300 3240/2000 3180/1950 2930/0 23" X 23"
SD24-F1 Single 24" 1100 1/3 115 5.4 46 70 5000 4500 4300 3600 27" X 27"
SD24-GVD Variable 24" 1100 1/3 115/230 4.4/2.2 56 72 5050 4910 4810 4400 27" X 27"
SD30-G1D Single 30" 1100 1/3 115/230 4.4/2.2 72 82 8000 7000 6000 5000 33" X 33"
SD36-G1D Single 36" 850 1/2 115/230 6.6/3.3 88 72 12000 11000 10500 9500 39" X 39"
WEIGHT
(LBS)
dB(A)
@5 ft
FRAMING
DIMENSIONS
CFM @ STATIC PRESSUREHP VOLTAGE
AMPS
(FLA)MODEL SPEED
BLADE
DIAMETERRPM
NOTE: RPM Min (Minimum) is determined when louvers are opened one inchNote: Wind has a significant effect on exhaust fans. A 10 mph wind creates a 0.05” pressure against the fan. A 20 mph wind creates 0.20”pressure and 30 mph a 0.45” pressure. These pressures are in addition to the static pressure in the building. Wind blocks or hoods should beincluded in all designs where fans will be subjected to winds above 10 mph.
8" 13 1/4" 10" 4" 12" 10 3/4" 2
10" 15 1/4" 10" 4" 14" 12 3/4" 2
12" 17 1/4" 14" 6" 16" 14 3/4" 3
14" 19 1/4" 14" 6" 18" 16 3/4" 3
16" 21 1/4" 14" 6" 20" 18 3/4" 4
18" 23 1/4" 15" 6" 22" 20 3/4" 4
20" 25 1/4" 16" 6" 24" 22 3/4" 5
24" 29 1/4" 16" 6" 28" 26 3/4" 5
30" 35 1/4" 19" 6" 34" 32 3/4" 16
36" 41 1/4" 16 1/2" 6" 40" 38 3/4" 20
E NFAN
SIZE
A X A
SQUAREB C D (c/c)
���������
D
A
A
4 Mounting Holes.375” Diameter Serial Model & Label
Propeller
ESQR
C
Motor
B
D
EXPLOSION PROOF STANDARD FAN
General Information
Canarm’s Explosion Proof Fans follow a tradition of quality in design, materials and construction. Using our quality
“Standard Fan” housing and motor mount as the basis for design, we have developed an efficient, economically
priced Explosion Proof Fan. All Explosion Proof Fans have a single speed, dual voltage explosion proof motor that
meets and conforms to all the standards that are listed below.
Subject to Change without notice. Printed in Canada - 02/11
Features
Front
• Available in 12”, 18” and 24” sizes.
• All fans use a totally enclosed, ball bearing motor with thermal overload protection (fan cooled).
• The fan blades are well-balanced, heavy gauge aluminum.
• The rugged steel welded box housing has a durable powder coated finish.
• Aluminum louver shutters are supported by long life nylon bushings.
• Heavy wire chrome plated OSHA guards on intake side of fan.
• All fans are shipped completely assembled.
Back
Efficient • Low Maintenance • Easy Installation
Canarm’s Explosion Proof Fans follow a tradition of quality in design, materials and construction.
Class I, Group C Atmospheres containing ethyl ether, ethylene, gases or vapors of equivalent hazard.
Class I, Group D Atmospheres such as acetone, ammonia, benzene, butane, cyclopropane, ethanol, gasoline, hexane, methane, natural gas, naphtha, propane, or gasses or vapors of equivalent hazard.
Class II Group F Atmospheres containing carbonaceous dust, including carbon black, charcoal, coal, or coke dusts that have more than 8% total entrapped volatiles, or dusts that have been sensitized by other materials so that they present an explosion hazard.
Class II Group G Atmospheres containing combustible dusts not included in group E or F, including flour, grain, wood, plastic and chemicals.
EXPLOSION PROOF STANDARD FAN
Warranty
• 1 year on all components.
Subject to Change without notice. Printed in Canada - 02/11
Performance Data & Specifications
Dimensions
0" SP .05" SP .10" SP .25" SPSD12-XPF 12" 1/3 115/230 6.6/3.3 Single 1625 1,640 1,600 1,540 1,390 15" x 15"SD18-XPF 18" 1/3 115/230 6.6/3.3 Single 1625 3,200 3,150 3,090 2,920 21" x 21"SD24-XPF 24" 1/3 115/230 6.6/3.3 Single 1625 5,500 5,400 5,310 5,100 27" x 27"
Amps Operation Speed
Airflow Capacity - CFMModel Fan
SizeMotor H.P. Volts Fan
RPMFraming
Dimensions
CANARM LTD. - Corporate Office2157 Parkedale Ave., Brockville, ONCanada K6V 5V6Tel: (613) 342-5424 Fax: 1-800-263-4598
CANARM LTD. - USA Warehouse808 Commerce Park Drive
Ogdensburg, New York, USA 13669Tel: 1-800-267-4427 Fax: 1-800-263-4598
Web Site: www.canarm.comE-Mail: [email protected]
Arthur Manufacturing Facility#7686 Concession 16, RR 4 Arthur, ON
Canada N0G 1A0Tel: (519) 848-3910 Fax: (519) 848-3948
12" 17-1/4" 20-1/2" 6" 16" 14-3/4" 3 15 x 1518" 23-1/4" 20-1/2" 6" 22" 20-3/4" 4 21 x 2124" 29-1/4" 20-1/2" 6" 28" 26-3/4" 5 27 x 27
FramingC D(c/c) E NFan Size A B
Note: Wind has a significant effect on exhaust fans. A 10 mph wind creates a 0.05” pressure against the fan. A 20 mph windcreates 0.20” pressure and 30 mph a 0.45” pressure. These pressures are in addition to the static pressure in the building.Wind blocks or hoods should be included in all designs where fans will be subjected to winds above 10 mph.
D
A
Serial Model & Label
4 Mounting Holes.375” Diameter
Propeller
A
ExplosionProofMotor
C
B
DESQR
N- Louvers
XF SERIES EXHAUST FANS
Subject to Change without notice.
Features
• Available in 12”, 16”, 20” and 24” sizes.• Powder coated finish with quiet plastic exhaust louvers.• Totally enclosed motor with auto overload protection.• Black OSHA guard on intake.• 9 foot cord with 115 volt grounded plug.• 12”, 16” and 20” sizes come with switch - 3 speeds and OFF.• 24” size includes switch - 2 speeds and OFF.
• All fans are shipped completely assembled.
Canarm’s XF Wall Exhaust Fans are ideal for residential and light commercial applications!Durable • Low Maintenance • Easy Installation
Printed in Canada - 02/11
General Information
Canarm’s XF series wall exhaust fans are ideal for light commercial applications. Fansare 2 or 3 speeds - with “OFF” and come complete with a 9’ cord and 115 volt groundedplug. The fans are powder coated steel for strength and durability. The OSHA approvedguard is chrome plated. The fan comes complete with built-in poly shutter. Simply mountthe fan with 4 lag bolts in a framed opening and plug it in.
Accessories
• Galvanized hood.
• Easily assembled on site.
• 12”, 16”, 20” and 24” sizes
• 24” Extension Pull Chain
To determine the proper Canarm Fan for your applications, use the following formula.
Number of cubic feet in room / Number of minutes per air change =Required C.F.M. Capacity
**Example**A garage 60' x 36' x 10' which requires an air change every 5 minutes (see chart below),would require the following fan capacity:
Move up to the 20” fan to ensure proper ventilation rates.36 x 36 x 10 12,9605 5
2592 cfm= =
Fan Selection Chart
Assembly Hall 7 General Office 10
Auditorium 10 Gymnasium 8
Barber Shop 6 Hospital 8
Basement 8 Laundry 2
Bowling Alley 5 Locker Room 3
Church 15 Machine Shop 8
Classroom 6 School 7
Corridor 10 Store 8
Dance Hall 5 Summer Cooling 1
Department Store 6 Tavern 3
Dry Cleaning 5 Toilet 3
Factory 6 Warehouse 12
Garage 5 Welding Shop 2
APPLICATION MINUTES PERAIR CHANGE APPLICATION MINUTES PER
AIR CHANGE
Warranty
• 1 year on all components
XF SERIES EXHAUST FANS
Subject to Change without notice.
Fan Dimensions
Fan A B C D(c/c) E SQR N
(# of Louvers) Framing
XF12 16 7/8 9 5 14 7/8 13 1/2 3 14 x 14
XF16 20 7/8 10 5 18 7/8 17 1/2 4 18 x 18
XF20 24 7/8 10 3/4 5 22 7/8 21 1/2 5 22 x 22
XF24 28 7/8 10 3/4 5 26 7/8 25 1/2 6 26 x 26
Dimensions shown in inches
Printed in Canada - 02/11
CANARM LTD. - Corporate Office2157 Parkedale Ave., Brockville, ONCanada K6V 5V6Tel: (613) 342-5424 Fax: 1-800-263-4598
CANARM LTD. - USA Warehouse808 Commerce Park Drive
Ogdensburg, New York, USA 13669Tel: 1-800-267-4427 Fax: 1-800-263-4598
Web Site: www.canarm.comE-Mail: [email protected]
Arthur Manufacturing Facility#7686 Concession 16, RR 4 Arthur, ON
Canada N0G 1A0Tel: (519) 848-3910 Fax: (519) 848-3948
A
AB
C D
D
N
ESQR
Performance Data & Specifications
Model Number
BladeDiameter Motor HP Speed Volts Amps Fan RPM CFM
XF12 12" 1/50 3 115 1.0 1600/1400/1100 1050/830/560
XF16 16" 1/8 3 115 1.3 1600/1400/1100 2110/1600/1070
XF20 20" 1/4 3 115 1.8 1600/1400/1100 3300/2490/1720
XF24 24" 1/3 2 115 2.5 1600/1400 5120/3790
NOTE: RPM Min (Minimum) is determined when louvers are opened one inch.
Note: Wind has a significant effect on exhaust fans. A 10 mph wind creates a 0.05” pressure against the fan. A 20 mph wind creates 0.20”pressure and 30 mph a 0.45” pressure. These pressures are in addition to the static pressure in the building. Hoods should be included in alldesigns where fans will be subjected to winds above 10 mph.
PIT FAN
PF Series
General Information
High Performance • Low Maintenance • Corrosion Proof
Canarm “PF” series Pit Fans are designed to extract gases from manure pits.Designed for trouble free operation in the harshest of environments.
“PF” series fans are made of PVC ventilation pipe and are designed to mount on the end of a vent duct with the aid of a flange
adapter (not included). The European cast aluminum 3200 RPM motor, polypropylene fan blades and stainless steel hardware are
designed to provide maximum performance, long life and low maintenance, even under high static pressure and the harshest of
environments.
Framing Dimensions
Model BladeDia.
OutsideDiameter of Tube
MotorHP RPM DbA Voltage Amps 0" S.P. .05" S.P. .10" S.P. .20" S.P.
PF10-D 10" 10.7" 1/5 3,300 75 115/230 3.6/1.8 1,250 1,200 1,170 1100
PF12-D 12" 12.7" 1/5 3,300 75 115/230 3.6/1.8 1,580 1,500 1,460 1300
CFM
Warranty
• 2 years on Euro motors • 1 year on balance of fan
Subject to Change without notice. Printed in Canada - 02/11
CANARM LTD. - Corporate Office2157 Parkedale Ave., Brockville, ONCanada K6V 5V6Tel: (613) 342-5424 Fax: 1-800-263-4598
CANARM LTD. - USA Warehouse808 Commerce Park Drive
Ogdensburg, New York, USA 13669Tel: 1-800-267-4427 Fax: 1-800-263-4598
Web Site: www.canarm.comE-Mail: [email protected]
Arthur Manufacturing Facility#7686 Concession 16, RR 4 Arthur, ON
Canada N0G 1A0Tel: (519) 848-3910 Fax: (519) 848-3948
Features
• Available in 10” and 12” sizes.
• PVC Housing will not rust, chip or peel.
• Fiberglass reinforced polypropylene fan blades
• European designed & manufactured, cast aluminum, totally enclosed, 3200 RPM motor is designed for long life.
• Totally pre-assembled and prewired (230V) for fast, easy installation
• Stainless steel motor shaft, motor mount and hardware
UTILITY EXHAUST FANSIdeal for garage exhaust, residential greenhouses, workshops and any other larger
residential rooms requiring an exhaust fan.
Subject to Change without notice. Printed in Canada - 02/11
CANARM LTD. - Corporate Office2157 Parkedale Ave., Brockville, ONCanada K6V 5V6Tel: (613) 342-5424 Fax: 1-800-263-4598
CANARM LTD. - USA Warehouse808 Commerce Park Drive
Ogdensburg, New York, USA 13669Tel: 1-800-267-4427 Fax: 1-800-263-4598
Web Site: www.canarm.comE-Mail: [email protected]
Arthur Manufacturing Facility#7686 Concession 16, RR 4 Arthur, ON
Canada N0G 1A0Tel: (519) 848-3910 Fax: (519) 848-3948
UF10-G
Features
• 10” utility fan• grey and black finish• single speed• 14” chrome on/off pull chain• shipped completely assembled• 120 volt, 10’ black SJT plug with ground• 350 CFM• carton dimensions: 389 mm x 206 mm x 389 mm• 0.36 amps• The UF10 changes the air in a 10’ (3m) x 10’ (3m) room
every 2.5 minutes provided an adequate air inlet is available.