nProtect

Excellent Enterprises

Industrial Coating Line – nProtect

Test Results on Carbon Steel, SS, Coated Samples

Excellent Enterprises W: www.excellentexim.com

202,Madina Manzil, M: +91 9860218117

SR.No 61/62, Sai Baba Nagar M: +91 8408807869

Kondhwa Khurd E: info@excellentexim.com

Pune -411048

Maharashtra - India.

Sample 1 – MS Angle

1

nProtect

Uncoated – As is surfaces

Were

sanded to

remove

rust on surfaces

Uncoated –

As is

surfaces

Were 1 sanded to

remove rust

on surfaces

Sample 1 – MS Angle (Testing)

nProtect

Flange surface 2 was left uncoated and sample was:

2

• Taken through water immersion tests with temperature cycles of

10oC (12 hours) to

60oC (12 hours) for 400 hours

• Kept in open, humid environment (98% relative humidity) for 100+ hours

• Uncoated side caught corrosion in less than 24 hours

Sample 1 – MS Angle (Testing)

nProtect

2

3

• Completely coated side 3 shows no

corrosion/rusting

1 • Uncoated side 2 is corroding at high pace, as

expected

• Side 1, with not all corrosion/ rust taken out is showing extended surface corrosion over time

Sample 2 – Coated Panel

nProtect

As is Surface

Post Surface

• Coated surface shows high gloss, chemical resistance and easy-to-clean properties • This coating extends life of underlying coating by over 10 years and reduces maintenance costs to virtually nothing • Extreme protection from environmental elements provided

Sample 3 – SS Panel

nProtect

1

As if Surface

• Coated SS surface shows no sign of corrosion

• Surface 1 coated with milder formulation shows 2 reasons of wearing off due to abrasion, as opposed to

surface 2

Coated Surface

nProtect

Conclusions and Next Steps

• Our coating works as an ideal solution to outside-warehouse

easy-to-apply (airless/ conventional/ HVLP spray as well as wipe) easy-to-remove (300 grit sand paper/ sand blasting)

• Ensures stocked material is extremely easy-to-clean and looks aesthetic and presentable for audits, when required • Coating process does not impact and physical modifications material needs to go through at a later stage • Ideal for stocking of material until 3 years – any additional support required can be provided by Excellent team immediately • Work out requirements and volume of coating, with

Commercials