Example
18
Example Example • A quadrilateral ABCD has vertices A = (-7,4) B = (0, 3) C = (5, 1), and D = (-2, 2). • It is translated by the vector . Graph ABCD and its translation image A’B’C’D’ on the coordinate plane. 1 , 5
description
Example. A quadrilateral ABCD has vertices A = (-7,4)B = (0, 3) C = (5, 1), and D = (-2, 2). It is translated by the vector . Graph ABCD and its translation image A’B’C’D’ on the coordinate plane. Dilations. Definitions. - PowerPoint PPT Presentation
Transcript of Example
ExampleExample• A quadrilateral ABCD has vertices
A = (-7,4) B = (0, 3) C = (5, 1), and D = (-2, 2).
• It is translated by the vector . Graph ABCD and its translation image A’B’C’D’ on the coordinate plane.
1,5
DilationsDilations
DefinitionsDefinitions• Scale Factor: The scale factor is the
number we multiply the sides or coordinates of a figure by to get the new coordinates or sides.
• Enlargement: When you multiply by a number whose absolute value is greater then 1. (Gets Bigger)
• Reduction: When you multiply by a number whose absolute value is less than 1. (Gets Smaller)
Previously, you studied rigid transformations, in which the image and preimage of a figure are congruent. In this lesson, you will study a type of nonrigid transformation called a dilation, in which the image and preimage of a figure are similar.
A dilation with center C and scale factor k is a transformation that maps every point P in the plane to a point P so that the following properties are true.
If P is not the center point C, then the image point P lies on .
The scale factor k is a positive number such that k = , and k 1.
CP
CP CP
If P is the center point C, then P = P .
Identifying Dilations
The dilation is a reduction if 0 < k < 1 and it is an enlargement if k > 1.
• •C C
P
Q
R
P
Q
R
P´
Q´
R´
P´
Q´
R´
3
6
2
5
Reduction: k = = =36
12
CPCP
Enlargement: k = =52
CPCP
Because PQR ~ P´Q´R´, is equal to the scale factor of the dilation.P´Q´PQ
Identifying Dilations
Identifying Dilations
Identify the dilation and find its scale factor.
•C
PP´
2
3
SOLUTION
Because = , the scale factor
is k = . 23
23
CPCP
This is a reduction.
Identifying Dilations
Identify the dilation and find its scale factor.
•C
PP´
2
3
•
P
P´
C
1
2
SOLUTION SOLUTION
Because = , the scale factor
is k = . 23
23
CPCP Because = , the scale factor
is k = 2.
21
CPCP
This is a reduction. This is an enlargement.
Dilation in a Coordinate Plane
In a coordinate plane, dilations whose centers are the origin have the property that the image of P(x, y) is P´(kx, ky).
Draw a dilation of rectangle ABCD with A(2, 2), B(6, 2), C(6, 4), and D(2, 4).
Use the origin as the center and use a scale factor of . How does the
perimeter of the preimage compare to the perimeter of the image?
12
A
A´1
1O
B´
C´D´ B
CD
x
y
•
SOLUTION
Because the center of the dilation is the origin, you can find the image of each vertex by multiplying its coordinates by the scale factor.
A(2, 2) A´(1, 1)
B(6, 2) B´(3, 1)
C(6, 4) C ´(3, 2)
D(2, 4) D´(1, 2)
From the graph, you can see that the preimage has a perimeter of 12 and the image has a perimeter of 6.
Dilation in a Coordinate Plane
In a coordinate plane, dilations whose centers are the origin have the property that the image of P(x, y) is P´(kx, ky).
Draw a dilation of rectangle ABCD with A(2, 2), B(6, 2), C(6, 4), and D(2, 4).
Use the origin as the center and use a scale factor of . How does the
perimeter of the preimage compare to the perimeter of the image?
12
SOLUTION
A
A´1
1O
B´
C´D´ B
CD
x
y
•
A preimage and its image after a dilation are similar figures.
Therefore, the ratio of the perimeters of a preimage and its image is equal to the scale factor of the dilation.
The shadow puppet shown is 12 inches tall (CP in the diagram). Find the height of the shadow, SH, for each distance from the screen. In each case, by what percent is the shadow larger than the puppet?
Using Dilations in Real Life
LC = LP = 59 in.; LS = LH = 74 in.
SOLUTION
5974
12SH
=
59 (SH) = 888
SH 15 inches
LCLS
CPSH
=
Shadow puppets have been used in many countries for hundreds of years. A flat figure is held between a light and a screen. The audience on the other side of the screen sees the puppet’s shadow. The shadow is a dilation, or enlargement, of the shadow puppet. When looking at a cross sectional view, LCP ~ LSH.
scale factor =SHCP
So, the shadow is 25 % larger than the puppet.
To find the percent of size increase, use the scale factor of the dilation.
= 1.251512
Using Dilations in Real Life
LC = LP = 59 in.; LS = LH = 74 in.; SH 15 inches
SOLUTION
Shadow puppets have been used in many countries for hundreds of years. A flat figure is held between a light and a screen. The audience on the other side of the screen sees the puppet’s shadow. The shadow is a dilation, or enlargement, of the shadow puppet. When looking at a cross sectional view, LCP ~ LSH.
6674
12SH
=
Using Dilations in Real Life
Shadow puppets have been used in many countries for hundreds of years. A flat figure is held between a light and a screen. The audience on the other side of the screen sees the puppet’s shadow. The shadow is a dilation, or enlargement, of the shadow puppet. When looking at a cross sectional view, LCP ~ LSH.
LC = LP = 66 in.; LS = LH = 74 in.
SOLUTION
66 (SH) = 888
SH 13.45 inches
LCLS
CPSH
=
Using Dilations in Real Life
Shadow puppets have been used in many countries for hundreds of years. A flat figure is held between a light and a screen. The audience on the other side of the screen sees the puppet’s shadow. The shadow is a dilation, or enlargement, of the shadow puppet. When looking at a cross sectional view, LCP ~ LSH.
LC = LP = 66 in.; LS = LH = 74 in.; SH 13.45 inches
SOLUTION
scale factor =SHCP
So, the shadow is 12 % larger than the puppet.
To find the percent of size increase, use the scale factor of the dilation.
= 1.1213.45
12
Example of a dilation
• The dilation is a reduction if 0<k<1 and it is an enlargement if k > 1
1
2
2
5
Example 1
• Identify the dilation and find its scale factor
C
Example 1
• Identify the dilation and find its scale factor
C
Reduction, Because
The scale factor is k = ⅔
' 2
3
CP
CP ' 2
1
CP
CPEnlargement, Because
The scale factor is k = 2
Example 2Dilation in a Coordinate Plane
• Draw a dilation of a rectangle ABCD with vertices A(1,1), B(3,1), C(3,2) and D(1,2). Use the origin as the center and use a scale factor of 2. How does the perimeter of the preimage compare to the perimeter of the image?
Example 2Dilation in a Coordinate Plane
• Draw a dilation of a rectangle ABCD with vertices A(1,1), B(3,1), C(3,2) and D(1,2). Use the origin as the center and use a scale factor of 2. How does the perimeter of the preimage compare to the perimeter of the image?
• Preimage has a perimeter of 6• Image has a perimeter of 12• The perimeter was enlarged by a
factor of 2
