EVZ BROCKMAN ENGINEERING€¦ · facility and design office in Forest Road, Corio. This facility...
Transcript of EVZ BROCKMAN ENGINEERING€¦ · facility and design office in Forest Road, Corio. This facility...
EVZ BROCKMAN ENGINEERING
Within our maintenance works we have jacked a number
of tanks up to 36M diameter to a height of up to 3M to
allow access under the tank for inspection and repairs and
reconstruction of the foundations. A feature of our method
of jacking is that it allows us to lift the tank in a level plane
thereby reducing local stresses and the likelihood of the
tank shell buckling.
Other innovations in the tank maintenance works include
the building of a cold cutting machine to remove floors in
tanks where a substantial amount of hydrocarbons has
leaked under the floor making it unsafe to use other methods
of cutting.
EVZ Brockman Engineering was originally established in
Geelong in 1921 and currently operate a steel fabrication
facility and design office in Forest Road, Corio. This facility
also serves as a base for our site construction and
maintenance operations throughout the Eastern States of
Australia.
Most of our work revolves around providing liquid and
bulk storage facilities in the form of tanks, silos and
hoppers and is generally received on a design and
construct basis with the majority of works for the water
industry awarded as full turn key projects incorporating
earthworks, foundations, surface treatment, cathodic
protection, electrical works and piping.
Some of our clients over recent years include:
• Shell
• Mobil
• Caltex
• Marstel Terminals
• Terminals Pty Ltd
• Alcoa
• Blue Circle Southern Cement
• Melbourne Water
• Yarra Valley Water
• South East Water
EVZ Brockman Engineering specialises in the design,
construction and maintenance of steel storage tanks
for the oil, chemical and water resources industries as
well as the shop fabrication of platework, ductwork and
structural components for the aluminium, cement,
fertiliser and power generation industries.
Design, Construction and Maintenance
Engineering Facilities
Brockman Engineering is committed to providing quality
products engineered to the highest standards and which
are delivered safely and in accordance with project schedules.
We currently work to the following standards:
• ISO AS / NZS 9001 in Quality Management Systems
• ISO AS / NZS 4801 for OHS Management Systems
In addition, our design, construction and maintenance
work on steel storage tanks is carried out to the following
codes:
• API 650
• API 653
• BS 2654
• AWWA - D100
Safety and Quality
Workshop Area - 4194 SQMSite Area - 23,000 SQM
Cranage
• High Bay - 2 No Bridge Cranes
12.5 Tonne & 10 Tonne
With 9.5M Under Hook
• Low Bay - 2 No Bridge Cranes
7.5 Tonne & 5 Tonne
With 6M Under Hook
• Mobile Tractor Crane 8 Tonne
• Nissan Forklift 4 Tonne
Equipment
• Vessel Rotators
• 1000 Tonne Press Brake 6M Wide
• 3M x 25MM Pearson Guillotine
• Pyramid Rolls 12MM x 2400MM
• Vertical Rolls 32MM x 3000MM
• Scharman Horizontal Borer with Digital Readout
• Parkson Universal Mill
• Mechanicy Universal Mill
• Snow Vertical Surface Grinder (1800 x 460MM)
• Invicta 810 Stroke Shaper
• Asquith Radial Drill x 1500MM Arm
• Batleboi Radial Drill x 162MM Arm
• Macson Lathe 4000 Bed x 1200 Diameter in Gap
• HMT Lathe 2743 Bed x 300 O/Saddle
• Krachin Lathe 1800 Bed x 300 O/Saddle
• PSG Lathe 1350 Bed x 240 O/Saddle
• Power Hacksaw
• Pipe Benders
• Pipe Threaders
• Pressure Testing Equipment
Welding Equipment
• Submerged Arc
• TIG Welding
• GMAW, GTAW
• MIG Welding
• ARC Welding
Design & Onsite Construction Works
• Steel water storage reservoirs including foundations and
associated piping works for the storage of potable,
treated and raw water.
• Steel storage tanks for the oil and chemical industries
including both fixed and floating roofs.
• Steel silos and hoppers for the cement and fertiliser
industries.
• Steel demineralised water tanks and clarifiers for the
power generation industry.
Workshop Capability
• Shop fabrication of steel tanks for the oil, chemical and
water resource industries.
• Fabrication of:
- Circular dryers, coolers and stacks for the cement and
aluminium industries.
- Pipe racks and pipe spooling for the oil and chemical
industries.
- Galvanising baths.
- Structural steelwork, stairs, access towers and general
plate fabrication.
Maintenance Works
• Repairs and maintenance work on steel storage tanks for:
- Refineries.
- Oil company terminals.
- Chemical companies and terminal operators.
- Shutdown work for the cement and power generation
industries.
- Repairs to tankage for Water Boards.
- Repairs to potshells for the aluminum industry.
Capability Profile
Site Equipment
• Nissan 40 Tonne Mobile Crane
• Bucyrus 30 Tonne Mobile Crane
• Franna 16 Tonne Mobile Crane
• 2 No Twin Head Tank Girth Welding Machines
• 1 No 140 KVA Diesel Generators
• 2 No 125 KVA Diesel Generators
• 3 No 90 KVA Diesel Generators
• 3 No 30 KVA Diesel Generators
• Boxed Welding Machines
• Tank Side Scaffold
• Tank Rolling Access Cages
• Tank Jacking Equipment
• Cold Cutting Machine for Tank Floors
Brockman Engineering is a member of the EVZ Group,
providing further strength and support with inter-company
nationwide access to facilities, skills and professional
services.
The EVZ Group is able to deliver against a wide range of
engineering project requirements. In brief this includes;
backup and prime power generation and co-generation,
marine wastewater treatment, surge and bulk storage
tanks, silos, cooling towers and specialist pipeline. We
engineer large scale structural fabrication and erection, for
stadiums, car parks, bridges and multi-storey buildings. We
design and install Syfonic roof drainage systems world-wide.
For more details contact EVZ Brockman Engineering.
The EVZ Group
Head Office:340 Forest RoadCorio VIC 3214
Ph: 03 5274 1222Fax: 03 5275 1263
Postal Address:PO Box 221
Corio VIC 3214
Internet:Email: [email protected]
Web: www.brockmaneng.com.au
A Member of the EVZ Group 10 09
/1A