Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for...

22
Evolution to 5G Marco Stracuzzi Product Marketing Telit IoT Roadshow 2019

Transcript of Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for...

Page 1: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Evolution to 5G

Marco Stracuzzi

Product Marketing

Telit IoT Roadshow 2019

Page 2: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 2

Telit IoT Roadshow 2019

5G in an equation

Channel capacity in bits / second

channel Bandwidth

Signal-to-Noise ratio

𝐶 = 𝑛 ∗ 𝐵 ∗ log2 1 +𝑆

𝑁

number of antennas

Page 3: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 3

Telit IoT Roadshow 2019

Charlie Kaufman, Synecdoche, New York: The Shooting Script

“Everything is more complicated than you think”

3GPP TS 38.306 – Supported max data rate

Page 4: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

5G Standardization

Page 5: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 5

Telit IoT Roadshow 2019

5G Requirements• Data traffic: 10,000 times more traffic will need to be carried through all mobile broadband technologies at some point between 2020 and 2030

• Capacity: growth between ten and a hundred devices for each mobile communications user

• Lower latency (<1ms): to achieve higher data rates; faster procedure response times; to approach new use cases

• Battery life: Part of this lifetime extension will come from the evolution of battery technology but part will come from efficient handling of machine type traffic in the 5G system.

• Capability of handling different types of devices: 5G will need to be flexible enough to handle efficiently IoT devices that only send small, rare bursts of data, as well as advanced devices requiring to exchange large amount of data

• Peak data rates: higher than 10 Gbit/s, and more important the cell-edge data rate (for 95% of users) should be 100Mbit/s

Page 6: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 6

Telit IoT Roadshow 2019

The three tracks of 5G

Use case:

Speed 10Gbps

3GPP Rel.15

Use case:

Billions devices

3GPP Rel.16

Use case:

Low latency

1ms

3GPP Rel.16

Page 7: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Sub-6 GHz and mmWave

Page 8: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 8

Telit IoT Roadshow 2019

Typical spectrum allocation over time

Page 9: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 9

Telit IoT Roadshow 2019

5G Coverage – Combination of Low & High Bands

Extremely High Bands cm/mmWave

6-100 GHz5G 26, 28, 39 GHz

Ultra High Bands2.7-6 GHz

5G 3500 GHzLTE CBRS, LAA

High Bands2.1-2.7 GHz

5G 2500 MHzLTE 2100, 2600 GHz...

Mid Bands1-2.1 GHz

5G 1700, 1900 (AWS, n2)LTE AWS-1/2/3/4, PCS,…

Low Bands<1 GHz

5G 600, 700, 850, 900 MHzLTE 700 MHz

Lo

wH

igh

Pa

th L

oss

1000xLocal Capacity

20 Gbps DL10 CA, 1000 MHz BW100 MHz carriers

10x Capacity with LTE Grid

withMassive MIMO

IoT & CriticalCommunications

with Extended Coverage

2 Gbps DL5 CA, 100 MHz BW256QAM, 4x4 MIMO

200 Mbps DL10 MHz BW256QAM, 4x4 MIMO

Hotspots Gig-zones

Page 10: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 10

Telit IoT Roadshow 2019

Sub-6 + mmWave

Combining coverage and capacity benefits:Larger cells on sub-6GHzSmaller cells on mmWave – Gig-zones

New 5G NR mmWavenx10 Gigabit 5G

New 5G NR Sub-6 GHz & LTE Coverage

nx1 Gigabit 5G

Ubiquitous LTEGigabit LTE, VoLTE, ULL

Automotive

Private IoT Networks

Public Safety/Emergency

Services

Existing LTE Deployments

Page 11: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

5G Market

Page 12: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 12

Telit IoT Roadshow 2019

Comparison of Year 1 announcments

5G is here and it’s moving FAST

• 4G• 4 operators launched• 3 OEMs launched

• 5G• 30+ Operators launched – since 1st 5G launch on April 3rd 2019• 40+ OEMs announced• 150+ devices launched or in development – smartphones, hotspots, CPEs

and MODULES

→ 5G commercialization 5x faster than 4G

Page 13: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

5G Initial Use Cases

Page 14: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 14

Telit IoT Roadshow 2019

Mobile ComputingFixed Wireless AccessCustomer Premise Equipment (CPE)

Initial Use Cases for 5G modules

ResidentialHigh-Speed

Internet

Commercial & Industrial Routers

Gateways

EnterpriseNetworking

SD-WAN

Tablets/Handhelds Laptop/Notebook PCs

Page 15: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 15

Telit IoT Roadshow 2019

5G Network Architectures

Evolution of use cases over time as infrastructure evolves to final “pure 5G”

LTE+5G

Human Interaction – IoT

Broadband Experience Everywhere, Anytime

LTE CN/RAN+5GNR 5G NR+CN

Media Everywhere

Smart Vehicles,Transport & Infrastructure

Critical Control of Remote Devices

LTE RAN

OPTION 1(SA LTE,EPC connected)

LTE RAN

LTE Core (EPC)

5G Core

5G RAN

LTE Core (EPC)

5G RAN

5G CoreLTE Core

(EPC)5G Core

LTE RAN 5G RAN

OPTION 3(NSA NR, LTE assisted, EPC connected)

OPTION 2(SA NR, 5GC connected)

OPTION 4(NSA eLTE, NR assisted, 5GC connected)

LTE EPC needed to support non-5G / legacy devices

Page 16: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Telit Product Roadmap

Page 17: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 17

Telit IoT Roadshow 2019

LTE to 5G Broadband Datacard Roadmap

MDM9240 SDX20 SDX55

Cat 113GPP Rel 112x2 MIMODL/UL 600Mbps/75MbpsLTE-FDD/TDD3CA DL, 60MHzDC-HSPA+GNSS

Cat 183GPP Rel 124x4 MIMO on 3CADL/UL 1.2Gbps/150MbpsLTE-FDD/TDDLAA on 3CA5CA DL, 100MHzB48 (CBRS), FirstNet B14 and B71 support2CA DL, 40MHzDC-HSPA+GNSS

3GPP Rel 15 (both LTE and 5G)Gigabit LTE + 5G NR (Sub-6GHz + mmWave)2CC 5G-sub6 up to 200MHz BW, TDD8CC 5G-mmWave up to 800MHz BWOption 3.x and Option 3.A core network options, Option 2 in sub-6 onlyGNSS gen 9

Page 18: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 18

Telit IoT Roadshow 2019

FN980m 5G feature set

FEATURE | Sub-6 GHz Capabilities

MAX COMPONENT CARRIERS (CC) IN 5G-

SUB62 CC

MAX BANDWIDTH IN 5G-SUB6 200 MHz with 1CC

NUMEROLOGY, SUB-CARRIER SPACING 30 KHz

MODULATION: MAX QAM ORDER

SUPPORTEDDL: 256 QAM | UL: 256 QAM

MIMO DL CA: 4x4 | UL CA: 2x2

MASSIVE MIMO Yes: Reciprocity & Feedback based

DUPLEX MODE TDD and FDD

CORE NETWORK OPTIONS Option 3.X, Option 3A and Option 2

NSA AGGREGATION MODEDual Connectivity, PDCP Aggregation (DL and UL)

RF BANDS SUPPORTEDFDD: n1, n2, n3, n5, n12, n41, n66, n71TDD: n77, n78 and n79

FEATURE | mmWave Capabilities

MAX COMPONENT CARRIERS (CC) IN 5G-

MMWAVEDL: 8CA | UL: 8CA

MAX BANDWIDTH IN 5G-MMWAVE 800Mhz (50, 100, 200 and 400 Mhz carriers)

NON-CONTIGUOUS CA for DL CA only

MAXIMUM IBW Up to 1200 MHz

INTER-BAND (28GHZ + 39GHZ) CA Not supported

CARRIER SPACING NUMEROLOGY

120 KHz for data and sync channels240 KHz for sync channels only

MODULATION: MAX QAM ORDER

SUPPORTEDUp to 64QAM (both DL/UL)

MIMODL CA: 2x2 MIMO up to 8CCUL CA: 1x1 MIMO up to 8CC, 2x2 up to 4CC

CORE NETWORK OPTIONS Option 3.X and 3A

RF BANDS SUPPORTEDn261 (27.5 – 28.35 GHz) and n260 (37.00 –40.00 GHz) dual band mode

Page 19: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 19

Telit IoT Roadshow 2019

FN980m Product Bundling / Configurations

4G + 5G NR, Sub-6 + mmWave4G + 5G NR, Sub-6GHz

FN980 for LTE + 5G sub 6GHz bandsIndoor and Outdoor applications

Use cases: • indoor CPE, gateways and routers

FN980 for LTE + 5G sub 6GHz bandsPlus active antenna for 5G mmWave

Use cases: • outdoor CPE, gateways and routers• indoor mmWave deployments in

hyperdense environments such as large venues

Residential EnterpriseNetworking

SD-WAN

Gateways & Routers EnterpriseNetworking

SD-WAN

Residential Gateways & Routers

Page 20: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 20

Telit IoT Roadshow 2019

October 23, 2019

Telit Completes Successful First Live 5G Tests of New Industrial-Grade 5G M.2 Data Card

• Conducted on a live 5G network in Korea, the tests highlight Telit'sleadership in providing businesses and other organizations with 5G solutions for industrial routers and gateways, fixed wireless access, video broadcasting, private LTE/5G networks and more.

• The successful network tests were on a Tier 1 operator's live 5G network in Korea at sub-6 GHz frequencies. A second set of successful tests were conducted in millimeter wave spectrum using test equipment.

• Samples are currently shipping, with commercial shipments following in Q1 2020.

Page 21: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Confidential & Proprietary© 2019 Telit. All Rights Reserved. 21

Telit IoT Roadshow 2019

FCC finds 5G poses no new risk – Source: Mobile World Live – August 9, 2019

Does 5G pose health risks?

• US officials set public concerns about the health impacts of 5G aside, concluding there is nothing about the technology or the bands it operates in which would require new limits on radio frequency (RF) exposure.

• On a call with journalists, senior FCC officials noted the US’ current RF standards for handheld devices in particular, are among the strictest in the world. They added a review of scientific evidence conducted by the Food and Drug Administration’s Centre for Devices and Radiological Health found no adverse health effects in humans caused by RF exposure at or under the current limits.

Page 22: Evolution to 5G - Telit Roadshow/2019...NUMEROLOGY 120 KHz for data and sync channels 240 KHz for sync channels only MODULATION: MAX QAM ORDER SUPPORTED Up to 64QAM (both DL/UL) MIMO

Thank You!

Telit reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. The information contained herein is provided “as is.” No warranty of any kind, either express or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by Telit at any time. For most recent documents, please visit www.telit.com © 2019 Telit. All Rights Reserved.

Marco Stracuzzi, Product [email protected]