Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer...
-
Upload
skye-cushion -
Category
Documents
-
view
219 -
download
1
Transcript of Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer...
![Page 1: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/1.jpg)
Evolution of the SAW Transducer for Communication Systems
Donald C. Malocha
Electrical & Computer Engineering Dept.
University of Central Florida
Orlando, Fl. 32816-2450
Special thanks to the UFFC_S and contributing members
who initiated, built and maintain the UFFC_S Digital
Archive.
![Page 2: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/2.jpg)
• In recognition of the 50th Anniversary of the UFFC_S, the presentation will focus on the SAW transducer evolution through the UFFC_S publications.
• The presentation highlights the development through the “eyes” of the UFFC, not necessarily crediting or citing the first publication, inventor, etc.
• There is a large body of contributions in other publications, patents, worldwide symposiums, non_English journals, etc., which makes it virtually impossible to site the first disclosure of ideas.
• Every significant SAW transducer embodiment has eventually graced the pages of UFFC publications.
• Disclaimer: The material presented does not represent the views of the society fdhfdthftghffdhsdtewratseafowieejfcoiswejvcoiswejefoisiwifvnwomopskefoiwejkfoiwemfoimcwvwejfiowejriofjweoivmoiwejfiwjfiowejifojweiojfg9wer0iwekpvoewpo.
Presentation Approach
If there are errors or inaccuracies in the presentation, please email me the correct citation(s). Your input is [email protected]
![Page 3: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/3.jpg)
Any sufficiently advance
technology is indistinguishable
from magic.Arthur C. Clarke
![Page 4: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/4.jpg)
SAW Transducer’s Degrees of Freedom
• Transducer Parameter Degrees of Freedom– Amplitude– Phase– Delay– Frequency
• Device Infrastructure Degrees of Freedom– Material Choice– Thin Films on the Substrate– Spatial Diversity on the Substrate– Electrical Networks and Interface
![Page 5: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/5.jpg)
Introduction• _ Transduction• _ Reflection• _ Re-Generation• _ Non-Linearity's
• This presentation addresses the first three properties applicable to SAW transducers
![Page 6: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/6.jpg)
Transducer Embodiment Fundamentals –basic bag of tricks
• Fundamental concepts used in all transducers
–Electrodes
–Sampling
–Apodization
![Page 7: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/7.jpg)
Multi- Electrode Transducers
“Reflection of a Surface Wave from Three Types of ID Transducer”, A. De Vries, R. Miller and T. Wojcik, 1972 IUS, pp. 353-358
Note: Floating Electrode
“Applications of Double Electrodes in SAW Device Design”, T. Bristol, et.al., 1972 IUS, pp. 377-380
• Split electrode transducer used to eliminate reflections
• Minimizes triple transit and self-resonance• 3rd Harmonic Operation
![Page 8: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/8.jpg)
Transducer Sampling- Harmonics
“Surface Acoustic Wave Multielectrode Transducers”, H. Engan, UFFC_T, 1975, pp. 395-401
Note: Floating Electrode
![Page 9: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/9.jpg)
First Reference to a Balanced SAW Transducer (Dual Track)
“Design of Interdigital Arrays for Acoustic Surface Wave Filters, C. Atzani and L. Masotti, 1972 IUS, pp. 242-252
First introduced with regards to sampling
![Page 10: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/10.jpg)
Space Harmonic Control
• Changing electrode a/p can control harmonics
“Space-Harmonic Response of Surface Wave Transducers”, R.D. Weglein and G.R. Nudd, 1972 IUS, pp. 346-352.
![Page 11: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/11.jpg)
Interdigitated IDT (IIDT)
“SAW Filters Employing Interdigitated Interdigital Transducers, M. Lewis, 1982 IUS, pp.12-17.
Interleaved I/O transducersLow loss structureNo weighting
![Page 12: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/12.jpg)
Low Loss IIDT Antenna Duplexer
“Low Loss SAW Filter for Antenna Duplexer”, M. Hikita, T. Tabushi, H. Kojima, A. Nakagoshi and Y. Kinoshita, IUS 1983, pp 77-82.
Weighted transducer structure
![Page 13: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/13.jpg)
Tap Weighting and Delay•Apodization maps ideal tap weights into the spatial profile of the transducer.
•Idealized attenuated tap weights and electrodes provide delay.
“Acoustic Surface Wave Filters”, R. Tancrell, 1969 IUS, pp. 48-64
Uniform spatial profile, variable amplitude
Variable spatial profile, uniform amplitude
Q: How do we build arbitrary filter responses?
A: Use sampling theory and weight the electrodes.
![Page 14: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/14.jpg)
FIR Filter to Apodized SAW Transducer
Relations between transversal filter, impulse response and SAW transducer. The transducer is a spatial mapping of the time domain response.
“Acoustic Surface Wave Filters”, R. Tancrell, 1969 IUS, pp. 48-64.
![Page 15: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/15.jpg)
SAW Transducer Sampling
“SAW Filter Sampling Technique”, Hunsinger & Kansy, UFFC_T, 1975, pp. 270_273
A SAW transducer can use an arbitrary sampling frequency regardless of center frequency, with a uniform sampling rate, subject to the Nyquist criteria.
Not required to use an integer number of electrodes per wavelength to obtain a filter response.
![Page 16: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/16.jpg)
Dual Passband Filters
“Multipassband Low Loss SAW Filters”, B. Potter & T. Shoquist, 1977 IUS, pp., 736_739.
![Page 17: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/17.jpg)
Apodized SAW Filter
RF @t=0
Main SAW
TTE
![Page 18: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/18.jpg)
SAW Apodization Analysis
SAW Conductance
SAW Apodization Loss
Arbitrary SAW Apodization Profile
![Page 19: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/19.jpg)
SAW Amplitude Beam Profile as a Function of Frequency
7.5 107 1 108 1.2510845
20
5
XdB f( )
Ampn f( )
f
0.25 0 0.25 0.5 0.75 10.5
0.4
0.3
0.2
0.1
0
0.1
0.2
0.3
0.4
0.5
Center frequency (f0)0.95*f00.93*f00.86*f0
Wave Amp. vs Beam Position vs. Frequency
Relative SAW Amplitude
Nor
mal
ized
Bea
m P
ositi
on (
x/W
a)
0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.2550
40
30
20
10
0
ConductanceFrequency Response
Ideal H(f) and Conductance: ACOS Fcn.
Normalized Frequency (f/f0)
dB
-Transfer function assumes a uniform integrating transducer
- Conductance vs frequency
Amplitude profile vs beam position @ 4 different frequencies
![Page 20: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/20.jpg)
Slant Centered Apodized IDT
“Low Shape Factor Design Considerations”,P. Meyer, 1975 IUS, pp. 334_335
2 wavelength gaps; in-line; dummy electrodes; split electrode design
Slanted transducers
SAW transducer schematic; dummy electrodes removed for clarity
![Page 21: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/21.jpg)
Acoustic Conductance vs Apodization Technique
Each transducer has the exact same impulse response, but the apodization pattern affects the electrical parameters and can be a problem, yielding a poor filter response due to electrical circuit interactions.
![Page 22: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/22.jpg)
Example Low Shape FactorSlant-Apodized Transducer Filter
![Page 23: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/23.jpg)
Phase Weighting
“Phase Weighting for Low Loss Filters”, M. Hikita, Y. Kinoshita, and T. Tabuchi, 1980 IUS, pp. 308-312.
Approach a uniform beam profile
![Page 24: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/24.jpg)
Distance Weighting
“ Acoustic Surface Wave Filters Using New Distance Weighting Technique”, K. Yamanouchi and T. Meguro, IUS 1980, pp. 313-316.
• Each track is uniform but differing bandwidth/group delay• Sum of sampling functions
• Vary bandwidth by apodization profile• Group delay varies with track• Structure shown yields linear phase due to symmetry
•Each track is approximately a rect fcn.•Uniform magnitude of beam profile
![Page 25: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/25.jpg)
Weighting Techniques• Q: How do we weight
both transducers to obtain better filter performance?
• A: Apply tap weighting to the transducer without using apodization
• Better filter shape factor• Smaller device
![Page 26: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/26.jpg)
Phase Weighting _ SAW Coded Transducer
D ata
C lockPu lseG enerato r
-1 1 -1 1 -1-1 1-1
Coded Transducer
SAW Waveform
InputTransducer
SAW C o d e d Tra nsd uc e r“Evaluation of Digitally Coded Acoustic Surface Wave Matched Filters”, W. Jones, C.S. Hartmann, and L. Claiborne, UFFC-T, 1971, pp.21-27
Example of matched filter response
![Page 27: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/27.jpg)
Block Weighting to a Desired Response
“Synthesis of Periodic Unapodized Surface Wave Transducers”, T. Bristol, IUS 1972, pp. 377-380
Phase, block, or a modified withdrawal weighting concept.No apodization but weighted IR.
Hamming Function Approximation
![Page 28: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/28.jpg)
Withdrawal Weighting
• “Weighting IDT SAW Transducers by Selective Withdrawal Weighting of Electrodes” C.S. Hartmann, 1973, IUS, pp 423-426
•Approximates apodization pattern•Works well for small fractional bandwidths•Allows weighting of in-line transducers•Actually removed electrodes
![Page 29: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/29.jpg)
Series Weighted IDT
“Series Weighting of SAW Transducers”, H. Engan, 1974 IUS, pp. 422-424
Amplitude Weighted - yields nearly uniform spatial beam profile
Uses a voltage divider across the aperture
![Page 30: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/30.jpg)
“Combining Series Section Weighting with Withdrawal Weighting in Surface Acoustic Wave Transducers”, F. Sandy, UFFC_T, Vol.
26, No. 4, 1979, pp. 308-312
Combining Series-Withdrawal Weighting
![Page 31: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/31.jpg)
Tap Weight Enhancement
“Tap Weight Enhancement for Broadband Filters” D.C. Malocha, S. Datta, and B.J. Hunsinger, UFFC-T, 1978, pp. 51-54.
Analog tap weight control rather than just unity taps weights
![Page 32: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/32.jpg)
Capacitive Tap Weighted Network•Uses thin film capacitors fabricated in a multi-level process
• a) a balance structure
• b) an unbalanced structure
•Generates an analog amplitude weighted SAW-uniform spatial beam profile
“CTW SAW Transducers”, Malocha & Hunsinger, 1975, IUS, pp. 411-413.
![Page 33: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/33.jpg)
Spatial Diversity
“Acoustic Radiation Measurements and Calculations for Three Surface Wave Filter Designs”, M. Daniel and J. de Klerk, 1973 IUS, pp.449-455.
Apodized, linear dispersive, and slanted transducers. ( Chirp first discussed by R. Tancrell,
1969,1971)
![Page 34: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/34.jpg)
Non-Linear Phase Filter Using Dispersive Transducers
Single dispersive transducer filter
In-line doubly dispersive transducer filter
Slanted doubly dispersive filter
![Page 35: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/35.jpg)
SAW Slanted Dispersive Transducer
“ Surface Acoustic Wave Slanted Correlators for Linear Pulse Compressors”, B. Potter and C.S. Hartmann, IUS 1977, pp. 607-610.
Slant provides frequency/spatial diversity and eliminated Fresnel ripple in passband
![Page 36: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/36.jpg)
Linear Phase Filter using Dispersive Transducers
To 1st order, flat passband and linear phase.
![Page 37: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/37.jpg)
Linear Phase Slanted Transducer
“Wide-Band Linear Phase SAW Filter Design Using Slanted Transducer Fingers” , C.K. Campbell, Y. Ye and J. Sferrazza Pappa, UFFC-T, 1982, pp. 224-228.
• Transition band is determined by impulse response length.
• Each strip is a relatively narrowband response but the summation is a wideband response.
• Each strip’s group delay determines whether it is a linear or non-linear phase filter.
![Page 38: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/38.jpg)
Slanted Transducer Energy Distribution vs Frequency vs Beam Position
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.80
0.2
0.4
0.6
0.8
Normalized Frequency
Magnitude (L
inear)
Filter response is visualized as the sum of Filter response is visualized as the sum of
multiple individual narrowband frequency multiple individual narrowband frequency
responses which are spatially separated across responses which are spatially separated across
the transducer aperture.the transducer aperture.
0.5 0.4 0.3 0.2 0.1 0 0.1 0.2 0.3 0.4 0.50.5
0
0.5
1
1.5
Center frequencyPassband edge high frequencyPassband edge low frequencyMid-band frequency
Normalized beam position
Norm
alized a
mplitu
de
Center of transducer beam
Center frequency
Mid-band frequency
Band-edge frequency Band-edge
frequency
•Bandwidth is determined by the upper and lower strip band edge frequencies.
![Page 39: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/39.jpg)
Example Slanted Transducer Frequency Response
H x f( ) x( )
2Sa 2 f f0 x( )( )
x( )
2
Ht f( )
Wa
2
Wa
2
xA f( ) H x f( )
d
Wa
350 400 450 500 550 600 65050
40
30
20
10
0
Frequency (MHz)
Nor
mal
ized
Mag
nitu
de (
dB)
![Page 40: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/40.jpg)
Slanted Transducer Weighting Across Passband
“Tapered Transducers- Design and Applications”, L. Solie, 1998 IEEE IUS, pp.27-37.
![Page 41: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/41.jpg)
Slanted Transducer Weighting Technique
“Tapered Transducers- Design and Applications”, L. Solie, 1998 IEEE IUS, pp.27-37.
Block weighting is a form of capacitive weighting but allows only discrete amplitude steps.
•Sidelobes are dependent on weighting of electrodes.
![Page 42: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/42.jpg)
Multi-Phase Unidirectional SAW Transducers
• Q: How do we eliminate bi-directional loss?
• A: Change 3-port device into 2 port device over bandwidth of interest
• UDT requires some non-symmetry in transducer/electrical network
• Theoretically can have 0 dB loss• TTE can be zero at center frequency• Phasing network determines directivity• Matching network determines electrical
reflection
![Page 43: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/43.jpg)
Three Phase UDT
“Wideband Unidirectional Interdigital Surface Wave Transducers”, C.S. Hartmann, W. S. Jones and H. Vollers, UFFC-T, 1972, pp378-381
•Requires multi-level crossovers.•Requires a 1 or 2 element 60o degree phase shift network between ports. •Requires 1 or 2 element matching network. •Unidirectional fractional bandwidth up to approximately 20%.
![Page 44: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/44.jpg)
3 Phase UDT Operation
•Analyzed as 3 collinear transducers.
•Unit cell is 1 wavelength; no subharmonics. 1/3 wavelength electrode period; strong 2nd harmonic
![Page 45: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/45.jpg)
3 Phase UDT – Fo Vector Analysis
Simulation of forward and reverse responses
![Page 46: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/46.jpg)
Quadrature 3-Phase
“Quadrature 3 Phase Unidirectional Transducer”, D.C. Malocha, UFFC-T, Vol.26, no. 4, 1979, pp.
Forward response
Reverseresponse
![Page 47: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/47.jpg)
Apodized 3Phase UDT
![Page 48: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/48.jpg)
Three Phase UDT Low Loss Filter Results
Wide Band Filter Response
Narrowband Filter Response
![Page 49: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/49.jpg)
Group-Type UDT (GUDT)
“Low Insertion Loss Acoustic Surface Wave Filter Using Group-Type Unidirectional Interdigital Filter Transducer”, IUS, 1975, K. Yamanouchi, F. Nyffeler and K. Shibayama, pp. 317-321
•Single level fabrication
•Electrical phase shift network of 45o (1 or 2 elements) and matching network (often 1 element) is used with the spatial offset such that a SAW is launched in one direction over a determined bandwidth.
•Phasing always yields real input impedance; proper beam width choice eliminates separate matching network.
![Page 50: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/50.jpg)
Group-Type UDT
+ +
+ ++ +
+ +
I-Inphase
Q-Quadrature
Q-Quadrature
I-Inphase
Joining of transducers eliminates a wavelength within each unit cell composed of an I and Q port.
•GUDT uses interleaved transducers which are spatially offset from synchronism by an integer number plus one quarter wavelength.
•Single level metallization – no crossovers.
![Page 51: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/51.jpg)
GUDT Simulated F/R Responses
420 440 460 480 500 520 540 560 58050
40
30
20
10
0
Forward responseReverse responseIdeal response
GUDT 10units, 5pair/unit
Frequency (MHz)
dB
f fmin fmin df fmax
492 494 496 498 500 502 504 506 50850
40
30
20
10
0
HF f( ) HF f0( )
HR f( ) HF f0( )
Hdb f( )
f
MHz
The number of electrodes in the transducer sub-units is determined from design criteria. Sub-harmonics are generated from I-Q spacing.
Typical fractional bandwidth <15%.
![Page 52: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/52.jpg)
Single Phase UDT (SPUDT)• Q: How can TTE be
reduced w/o multi-phase UDT?
• A: Use internal transducer mechanical reflections to cancel regeneration
• Nearly eliminates TTE• Requires 1 (or 2 matching)
elements• Works like a UDT-lowers
insertion loss; theoretically as low as 0dB
![Page 53: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/53.jpg)
Original Single Phase UDT (SPUDT)
“A Triple Transit Suppression Technique”, K. Hanma and B.J Hunsinger, 1976, IUS, pp. 328-331
By matching the magnitudes and opposing phases of the acousto-mechanical reflection and the reflected acousto-electric wave the net reflected wave from an acoustic port can be minimized.
![Page 54: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/54.jpg)
The transducer is composed of a transduction and reflection structure. The reflecting structure may be incorporated into the transducer structure or can be superimposed onto the transduction structure. The reflector can be made by mass loading of metal, grooves, or dielectric material.
SPUDT Schematic Concept
![Page 55: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/55.jpg)
SPUDT Macroscopic Reflection
The figure above illustrates schematically how a SPUDT operates. The mechanical wave is equal in amplitude but 180o out of phase with the regenerated wave. First order analysis w/o cross coupling and first order reflection.
Figure: Abbott PhD Thesis1989
![Page 56: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/56.jpg)
Single Phase UDT - Evolution
“An Analysis of SAW Interdigital Transducers With Internal Reflections and the Application to the Design of Single-Phase Unidirectional Transducers”, C.S. Hartmann, P.V. Wright, R.J. Kansy and E.M. Garber, IUS, 1982, pp. 40-45.
Multi-level transducer with a reflective grating
![Page 57: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/57.jpg)
EWC -SPUDT Basic Unit Cells
A) Transduction and reflector
B) Transduction and no reflector
C) Reflector without transduction
D) No transduction and no reflector.
“Overview of Design Challenges for Single Phase Unidirectional SAW Filters”, C.S. Hartmann and B.P. Abbott, IUS 1989, pp. 79-89.
Schematic example of Electrode Width Controlled SPUDT
![Page 58: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/58.jpg)
Distributed Acoustic Reflecting Transducer (DART)
“Design of Low Loss SAW Filters Employing Distributed Acoustic Reflection Transducers”, T. Kodama, H. Kawabata, Y. Yasuhara and H. Sato, 1986 IUS, pp. 59-64.
![Page 59: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/59.jpg)
Floating Electrode UDT (FEUDT)
“ Low –Loss SAW Filter Using Internal Reflection Type of New Single Phase Unidirectional Transducer, K. Yamanouchi and H. Furuyashiki, IUS 1984, pp. 68-71.
Shorted or open electrode configuration changes the transduction/reflector interaction and “selects” forward/reverse directivity.
![Page 60: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/60.jpg)
Example of SPUDT Time/Frequency
TTE
MainSAW
Insertion loss ~ 5 dB
![Page 61: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/61.jpg)
Early Single Level SPUDT
“Low Loss SAW Devices Employing Single Stage Fabrication”, M. Lewis, IUS 1983, pp.104-108,
•Transducer is comb structure with internal series of reflectors•Comb produces sub-harmonics•Single level fabrication
![Page 62: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/62.jpg)
Slanted SPUDT
“Improved Design of Single-Phase UDT for Low Loss SAW Filters, C.B. Saw and C.K. Campbell, IUS 1987,pp. 169-172
Combining the SPUDT concept to slanted transducers provided both a wideband transduction and reflection mechanism.
Represents a single track of a Slanted SPUDT
![Page 63: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/63.jpg)
SPUDT Slanted Transducer Configuration
Each strip’s reflectors have a narrowband response around the strip’s center frequency
The electrical transduction and mechanical reflections are narrowband is each strip
The overall filter response is the sum of narrowband responses, which is wideband.
Conventional SPUDT: Mechanical reflectors have only a narrowband response around the filter center frequency, SPUDT net effect is narrowband
“Tapered Transducers- Design and Applications”, L. Solie, 1998 IEEE IUS, pp.27-37.
![Page 64: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/64.jpg)
SPUDT Slanted Transducer Filter
“Tapered Transducers- Design and Applications”, L. Solie, 1998 IEEE IUS, pp.27-37.
![Page 65: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/65.jpg)
“The Natural Single-Phase Unidirectional Transducer: A New Low-Loss SAW Transducer”, P.V. Wright, IUS 1985, pp. 58-63.
Natural Single Phase Unidirectional Transducer (NSPUDT)
•For some cuts of material, the transducer/crystal cut combination is “naturally unidirectional”.
•The effective center of transduction can be within/near the electrode region- this makes a spatial asymmetry in the transducer with respect to the transduction/reflection centers.
•Quarter-wavelength electrodes are used for the mechanical reflection.
•Problem: transducer only “looks” in one direction.
![Page 66: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/66.jpg)
Resonant SPUDT (RSPUDT)
“ A New Concept in SPUDT Design: the RSPUDT (Resonant SPUDT)”, P. Ventura, M. Solal, P. Dufilie, J.M. Hode, and F., Roux. IUS 1994, pp. 1-6.
![Page 67: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/67.jpg)
Waveguide SPUDT
“New SPUDT Cell Structure”, G. Martin, H. Schmidt, and B. Wall, 2002 IUS, pp. 39-42.
![Page 68: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/68.jpg)
Harmonic SPUDT (HSPUDT)
“A New Type SPUDT for use in High Frequency around 2 GHz”, C_Y. Jian and S. Beaudin, 2002 IUS, pp. 279-282.
Slanted HSPUDT
![Page 69: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/69.jpg)
SAW Propagation SimulationDon’t Panic!!!Diffraction – the Designer’s “Alibi”
What do you do when your filter doesn’t meet specs?!
![Page 70: Evolution of the SAW Transducer for Communication Systems Donald C. Malocha Electrical & Computer Engineering Dept. University of Central Florida Orlando,](https://reader035.fdocuments.us/reader035/viewer/2022062421/56649cc15503460f94988a4c/html5/thumbnails/70.jpg)
Some Concluding Remarks
•SAW devices have a limited future in filtering – CCDs will take over signal processing applications (circa 1979)•SAW RF filters with low insertion loss are merely laboratory curiosities.•SAW devices will have an estimated world wide market of about $250,000 (circa 1985).•SAW RF filters should be reduced in cost from $2.00 to less than $.50 within 5 years. (circa 1994)•SAW IF filters will be eliminated in all cellular radios by zero-IF by 2002.•LGX is the material of the future, and always will be!! •By the way, what is an effervescent wave ??•We came, we SAW, we conquered !
My crystal ball is fuzzy, so I’ll refer to some unidentified quotes of my predecessors:SAW technology is mature but still evolving.To our colleagues who developed the past SAW
technology, we salute you !!!You now have seen some of the tricks of the trade !