Eurotech 658 Lathes Series
-
Upload
cnc-systems -
Category
Documents
-
view
75 -
download
2
Transcript of Eurotech 658 Lathes Series
+2.36
-1.97
0spindleaxis
���������������������
�����������������������������������������
Productivity is Standard – Thousandsof Dollars of Features Included
�����������
• 18iT Control
• Color Graphics Screen with 10.4”Color LCD
• Full Keypad with Custom Touch Keys
• Macro A & Macro B
• Extra Memory
• RS232/PCMCIA Interface
• G54 - G59
• G80 - G89
• Proprietary package of G-codeCycles: (deep drilling with rotarytools, multiple threading, multiple
trapezoidal threading, chainedthreading, oil lubricationchannels, polygon contourmilling, circular contourmilling)
• Disc brake on Main Spindle
• RIgid Tapping on C, Y
• Tool Life management
• SBS Tool Load Monitoring
• G10 Programmable Input
• Chip Conveyor
• Automatic Tool Probe
• Live Tools (B658L, B658SL, B658LYand B658SLY)
• Standard Tooling
• Scale Feedback (B658SL, B658LYand B658SLY) on X, Y, C
• Air-Conditioned Electronics
• Polygonal Turning
• Unexpected Disturbance Detection
• Servo Turret Set-up Assistance
With the Y-axis the B658LY and B658SLY combine the capabilities of both a lathe and a 4-axis machining center.
1. Flat milling in repeated cuts2. Irregular slot milling (roughness - finishing)3. Key-way milling4. Thread milling5. Drilling and milling grid holes6. Milling of an accurate key-way7. Enables EGS (Eurotech Gang-tool System)8. Ability to put over 40 cutting tools on one 12-station turret9. Reduces set-ups, while maintaining cycle time speed10. Improves accuracy by eliminating tool change deviation
STANDARD FEATURES
���
���
����������� ����������
���
���
����������� ����������
Spindles
The heavy duty Eurotechcartridge type spindle is
driven by a motor coupledwith a gear box. Also, the
combination of the rigidheadstock and spindle
construction with the hightorque and power avail-
able at low rpm allowshigh chip removal rates
and maximum accuracy.
Over $60,000 In Control Options -Included to ImproveProfitability
CNC UNIT MOD. FANUC18i-T ,10.4” Color LCD, Alphanumeric
full-keyboard, Eurotech operator panel featuring softkeys.
This system moni-tors the loading ofthe most heavilyused tools: e.g. 1stOP. cutting tools,roughing tools,drills or U-drills. Itensures safe auto-matic machining with limited operator presence.
This special softwaredetects the abnormalload created by a col-lision during rapidtraverse or within themachining process.When a collisionoccurs, spindle rota-tion is stopped andthe axis movement ishalted thus dampen-ing the interference and limiting damage to the tooling. ������������������������������������������������
Graphical analysis of a crash and reactionof the axes and spindle drives
ALARMAXIS ABSORPTION
back traverse
interference point
AXIS SPEED
Approximate diagram
DAMAGE PROTECTION (air bag)SBS: EUROTECH SAFETY SOFTWARE TOOL LOAD MONITORING
Spindle Diagrams
�������� ��
������������ ����������� ����������
4 - 5