EUROSTARS - Registrants from the four conferences are … · 2015-07-02 · Semih Onut, Mehmet...

World Congress on Mechanical, Chemical, and Material Engineering (MCM’15)

Hotel Alimara Barcelona, Barcelona, Spain, July 20 – 21, 2015

1

World Congress on Mechanical, Chemical, and Material Engineering (MCM’15)

The congress consists of:

2nd International Conference on Mining, Material

and Metallurgical Engineering (MMME’15) Rooms Sitges (D)

2nd International Conference on Heat Transfer and

Fluid Flow (HTFF’15) Room Llivia (C)

4th International Conference on Mechanics and

Industrial Engineering (ICMIE’15) Room Llavorsi (B)

International Conference on Chemical and Polymer

Engineering (ICCPE’15) Rooms Sitges (D)

Registrants from the four conferences are permitted to attend any sessions from any of the four conferences.

Monday July 20

8:00 AM Registration

9:00 AM – 9:15 AM Official Opening of Congress - Room D

9:15 AM – 10:00 AM

MMME Keynote Lecture I - Room D:

Optimization of the tantalum ore production by control the

milling process

Pura Alfonso

Polytechnic University of Catalonia, Spain

9:15 AM – 10:00 AM

HTFF Keynote Lecture I - Room C:

Numerical Simulations of Crude-Oil Fouling

Omar K. Matar

Imperial College London, UK

9:15 AM – 10:00 AM

ICMIE Keynote Lecture I - Room B:

Nanoporous systems: Metallic muscles at work

Marton Takacs

Budapest University of Technology and Economics,

Hungary

Sessio

n C

ha

irs:

Dr. F

ran

k C

hen

g

Sessio

n C

ha

irs:

Dr. Y

uy

ua

n Z

ha

o

Sessio

n C

ha

irs:

Dr. X

up

ing

Zh

an

g

2

10:00 AM – 10:20 AM Coffee Break

10:20 AM – 11:05 AM

ICCPE Keynote Lecture I - Room D:

Distributed Microwave Pyrolysis of Waste: Case of

Polystyrene

Jamal Chaouki

Polytechnique, Montréal

10:20 AM – 12:20 PM - Room D

Session Name:

Metallurgical Fundamentals and Techniques

Session Chairs:

Dr. René del Villar &

Dr. André Carlos Silva

10:20 AM – 10:40 AM

MMME 323: Novel Flash Ironmaking Technology

Hong Yong Sohn, Yousef Mohassab

University of Utah, USA

10:40 AM – 11:00 AM

MMME 349: Reduction Kinetics of MnO in HCFeMn Slag by

SiMn Melt

Jung Ho Heo, Joo Hyun Park

Hanyang University, Korea

11:00 AM – 11:10 AM

MMME 358: Effects of Rheocasting Time in a Slurry Die

Casting Process on Microstructure and Strength of ZA-27

Zinc Alloy

Thawatchai Plookphol, Somjai Janudom, Weerarote

Cheewachotikul

Prince of Songkla University, Thailand

11:10 AM – 11:30 AM

MMME 123: Effect Of Yttrium On The Microstructure Of

Gravity Die Cast A356 Alloy

Ying Pio Lim, Wei Hong Yeo

University Tunku Abdul Rahman, Malaysia

11:30 AM – 11:40 AM

MMME 339: Recovery Ni and Li from Ternary Cathode

Materials after Manufacture Cobalt-Manganese Bromide

Catalyst

Dong Ju Shin, Chang Hyun Oh, Shun Myung Shin, Sung-Ho

Joo, Jei-Pil Wang

Korea Institute of Geoscience & Mineral Resours., Korea

Sessio

n C

ha

irs:

Dr. Z

olta

n N

ag

y

Mo

nd

ay

3

11:40 AM – 12:00 PM

MMME 319: Sintering of Al2O3–CeO2nanopowder prepared

by co-precipitation method

S.A. Hassanzadeh-Tabrizi, E. Taheri-Nassaj

Islamic Azad University, Iran

12:00 PM – 12:20 PM

MMME 322: Transient liquid phase bonding of dual phase

ferrite- martensite steels during dual phase heat treatment

cycle

M. Dehghanzadeh, A. Ekrami

Sharif University of Technology, Iran

10:20 AM – 12:10 PM - Room C

Session Name:

Industrial Engineering

Session Chairs:

Dr. Xuping Zhang &

Dr. Burak Ozdoganlar

10:20 AM – 10:30 AM

ICMIE 263: Two-Echelon Capacitated Vehicle Routing

Problem: A Case Study in a Textile Company

Semih Onut, Mehmet Rıfat Kamber, Abdulsamet Dumanlı

Yıldız Technical University, Turkey

10:30 AM – 10:50 AM

ICMIE 249: An Modified EPQ Model with Deteriorating

Production System and Deteriorating Product

N. Li, Felix T.S. Chan, S.H. Chung, Allen H. Tai

The Hong Kong Polytechnic University, Hong Kong

10:50 AM – 11:10 AM

ICMIE 254: An Integrated Fuzzy Multi Criteria Approach for

Robust Pairing Selection in Aviation Scheduling

Felix T.S. Chan, Samvedi, A., S.H. Chung

The Hong Kong Polytechnic University, Hong Kong

11:10 AM – 11:30 AM

ICMIE 246: Automated negotiation system in the SCM with

trade-off algorithm

Wan Sup Um

Gangneung-Wonju National University, South Korea

11:30 AM – 11:50 AM

ICMIE 256: A Reliability Model of Truck Transportation

Using FMEA and FTA

EunJi Kim, HwanSeong Kim

Korea Maritime and Ocean University, South Korea

Mo

nd

ay

4

11:50 AM – 12:10 PM

ICMIE 257: Optimal Heuristics Algorithm of Single Job-

order for Mobile Racks

HwanSeong Kim, EunJi Kim, KyoungMi Cheon, SamSang

You

Korea Maritime and Ocean University, South Korea

11:05 AM – 12:05 PM - Room B

Session Name:

Heat, Mass and Momentum Transport I

Session Chairs:

Dr. Seongkyu See

11:05 AM – 11:25 AM

HTFF 293: Non-Isothermal Displacements with Step-Profile

Time Dependent Injections in Homogeneous Porous Media

Qingwang Yuan, Jalel Azaiez

University of Calgary, Canada

11:25 AM – 11:35 AM

HTFF 330: Vertical Hele-Shaw Cell Flow Displacements

involving Reversible Chemical Reactions

Tiago F. Lins, Jalel Azaiez


11:35 AM – 11:55 AM

HTFF 327: Numerical Analysis of the fire resistive

performance of the water-film on a double-glazed curtain

wall

Kun Hyuk Sung, Hong Sun Ryou, Jun Seok Nam

Chung-Ang University, South Korea

11:55 AM – 12:05 PM

HTFF 329: Constitutive Theory of Heat Transfer

Liqiu Wang

University of Hong Kong, Hong Kong

12:10 PM – 1:10 PM Lunch

1:10 PM – 3:20 PM - Room D

Session Name:

Numerical Fluid Flow and Heat Transfer I

Session Chairs:

Dr. Fotini Labropulu &

Dr. Jalel Azaiez

Mo

nd

ay

5

1:10 PM – 1:20 PM

HTFF 301: Numerical study of impinging jet flow with

application to pressurized themal shock situations

Michail Georgiou, Miltiadis V. Papalexandris

Universite catholique de Louvain, Belgium

1:20 PM – 1:40 PM

HTFF 315: Natural Convection in a Square Enclosure

Cooled by Peltier Effect

Hilmi Kuscu, Kamil Kahveci, Baha Tulu Tanju

Trakya University, Turkey

1:40 PM – 2:00 PM

HTFF 316: Flow and Heat Transfer around an Air-Cooled

Coil Condenser

Ahmet Cihan, Kamil Kahveci, Alper Tezcan, Oktay

Hacıhafızoğlu

Beykent University, Turkey

2:00 PM – 2:20 PM

HTFF 283: Random Flow Generation of Atmospheric

Boundary Layer for Large Eddy Simulation Inflow

Conditions

Yi-Chao Li, Chii-Ming Cheng, Cheng-hsin Chang, Fuh-Min

Fang

Tamkang University, Taiwan

2:20 PM – 2:40 PM

HTFF 294: The Effect of Turbulent Uniform Flow around A

Square Cylinder

Fuh-Min Fang, Yi-Chao Li, Men-Wei Tsai

National Chung Hsing University, Taiwan

2:40 PM – 3:00 PM

HTFF 312: Numerical Investigation on the Dissipation

Property of the Rotated Roe Scheme

Fan Zhang, Jun Liu, Biaosong Chen

Dalian University of Technology, China

3:00 PM – 3:20 PM

HTFF 285: Flow around Nuclear rod bundles’ simulations

based on RANS and LES method respectively

Daqiang Yan, Jinghao Li

State Nuclear Power Software Development Center

(SNPSDC), China

Mo

nd

ay

6

1:10 PM – 3:00 PM - Room C

Session Name:

Mineral Processing & Safety I

Session Chairs:

Dr. Joohuyn Park &

Dr. Hong Yong Sohn

1:10 PM – 1:30 PM

MMME 127: Recent Developments in Flotation Column

Instrumentation and Control: An Update

René del Villar, Jocelyn Bouchard, André Desbiens, Éric

Poulin

Université Laval, Canada

1:30 PM – 1:50 PM

MMME 343: Apatite froth flotation using pequi’s yellow pulp

oil as collector

André Carlos Silva, Elenice Maria Schons Silva, Tatiane

Carvalho Silva

Universidade Federal de Goiás, Brazil

1:50 PM – 2:10 PM

MMME 348: A phenomenological-based semiphysical model

for hydrocyclones

Diego A. Munoz, Sara Taborda, Hernan Alvarez

Universidad Pontificia Bolivariana, Colombia

2:10 PM – 2:30 PM

MMME 326: Beneficiation of Haematite from Fluorspar

tailings by Reverse flotation

Willie Nheta, Thembelihle Portia Lubisi, Selby Masemola,

Mamookho Elizabeth Makhatha

University of Johannesburg, South Africa

2:30 PM – 2:40 PM

MMME 338: Recovery of scandium from chloride media

using the novel ion exchange resin

Nghiem Van Nguyen, Atsushi Iizuka, Etsuro Shibata,

Takashi Nakamura

Tohoku University, Japan

2:40 PM – 3:00 PM

MMME 332: Application of Longwall Top Coal Caving In

Challenging Geological Conditions

Ning Shi, Zhizeng Huang

Terra Energy LLC, China

Mo

nd

ay

7

1:10 PM – 2:50 PM - Room B

Session Name:

Chemical & Polymer Engineering I

Session Chairs:

Dr. Jamal Chaouki

1:10 PM – 1:30 PM

ICCPE 252: Segmental Shadowing Effect on Ultraviolet

Depolymerization and Resulting Molecular Weight

Distribution

Ezgi Erdogan, Nazmi Postacioglu, Ahmet Giz

Istanbul Technical University, Turkey

1:30 PM – 1:50 PM

ICCPE 257: Studying On The Effect Of Ph On Volume Phase

Transition For Composite Hydrogel Using By Fluorescence

Technique

Demet Kaya Aktaş


1:50 PM – 2:10 PM

ICCPE 245: Surface Channel Microstructures in Polymer

Films for Fluid Transport

V.G. Nazarov, V.P. Stolyarov, A.P. Kondratov

Moscow State University of Printing Arts, Russia

2:10 PM – 2:20 PM

ICCPE 266: Optimization-based design and analysis of a

complex energy system with multiple renewable energy

sources

Seulki Han, Jiyong Kim

University of Incheon, Korea

2:20 PM – 2:30 PM

ICCPE 268: An optimization-based design and analysis of

B2H2 (Biomass-To-Hydrogen) system

Seolhee Cho, Jiyong Kim

Incheon National University, Korea

2:30 PM – 2:40 PM

ICCPE 251: Ultrasonically Prepared Water Soluble

Curcumin Complexes Preparation and properties

Huceste Catalgil-Giz, Gulacti Topcu, Gulcemal Yildiz,

Sevim Isci

ITU Fen-Edebiyat Fakultesi, Turkey

2:40 PM – 2:50 PM

ICCPE 246: Modification of polypropylene membrane by ion

implantation and plasma treatment

Karolina Kotra-Konicka, Jakub M. Gac, Joanna Kalbarczyk

Warsaw University of Technology, Poland

Mo

nd

ay

8

3:20 PM – 3:40 PM Coffee Break

3:40 PM – 4:50 PM - Room B

Session Name:

Mechatronics

Session Chairs:

Dr. Felix T.S. Chan

3:40 PM – 4:00 PM

ICMIE 251: Electrical-Mechanical Dynamic Modelling and

Testing of a Lightweight-Link Robot Manipulator

Frederik Foldager, Dan Thomsen, Haijie Li, Kasper

Frederiksen, Anders Andersen, Xuping Zhang

Aarhus University, Denmark

4:00 PM – 4:20 PM

ICMIE 250: Separation of Granule Non-Ferrous Metals in

Shredded Cable Waste with Eddy Current Separator

Ahmet Fenercioğlu, Hamit Barutcu

Gaziosmanpaşa University, Turkey

4:20 PM – 4:30 PM

ICMIE 264: Accurate Measurement of Micro-Newton Scale

Dynamic Forces

Wei Chen, Emrullah Korkmaz, Burak Ozdoganlar, B. Arda

Gozen

Carnegie Mellon University, USA

4:30 PM – 4:50 PM

ICMIE 247: Low-cost RCP System for Control Courses using

Matlab and the Open-source Hardware

Young Sam Lee, Yeong Sang Park, Bong Eon Jo, Sugkil

Seo

Inha University, South Korea

3:40 PM – 4:30 PM - Room D

Session Name:

Numerical Fluid Flow and Heat Transfer II

Session Chairs:

Dr. Ahmet Cihan

3:40 PM – 4:00 PM

HTFF 302: Numerical analysis of the effect of filling ratio on

the transient behaviour of a Two-phase closed thermosyphon

Davoud Jafari, Sauro Filippeschi, Alessandro Franco, Paolo

Di Marco

Università di Pisa, Italy

Mo

nd

ay

9

4:00 PM – 4:20 PM

HTFF 326: Novel Thermal management of a Lithium-Ion

Battery: Internal Cooling Method

Shahabeddin K. Mohammadian, Yuwen Zhang

University of Missouri, USA

4:20 PM – 4:30 PM

HTFF 300: Inverse Heat conduction Analysis on the Input

Parameter in a One-Dimensional High Pressured Tube Using

Thermal Resistance Network and Kalman Filter

Jung-Hun Noh, Won-Geun Kim, Se-Jin Yook

Hanyang University, South Korea

3:40 PM – 5:20 PM - Room C

Session Name:

Multiphase Flow and Heat Transfer

Session Chairs:

Dr. Thomas Adams &

Dr. Laura Colla

3:40 PM – 3:50 PM

HTFF 317: Wettability in condensation phenomena

Mina Roudgar, Joel De Coninck

University of Mons, Belgium

3:50 PM – 4:10 PM

HTFF 296: Flow Boiling Heat Transfer of R134a in Multi

Micro channels

Ekhlas M. Fayyadh, Mohamed M. Mahmoud, Tassos G.

Karayiannis

Brunel University London, UK

4:10 PM – 4:20 PM

HTFF 332: Thermal Compositional Simulator for Multiphase

Flows in Near Wellbore Zone

Vsevolod Laptev, Denis Rudenko

Schlumberger Moscow Research, Russia

4:20 PM – 4:40 PM

HTFF 307: Slip Over a Lubricant Impregnated Surface in

Pressure-Driven Flow

Rui Sun, Chiu-On Ng


4:40 PM – 5:00 PM

HTFF 305: Experimental Study of a Bubble Pump Operating

with a Set of Parallel Lift tubes and a Binary Solution of

R134a-DMAC

Bella Gurevich, Michael Jelinek, Irene Borde, Avi Levy

Shamoon College of Engineering, Israel

Mo

nd

ay

10

5:00 PM – 5:20 PM

HTFF 289: Numerical Investigation of Droplet Dynamics in

Recirculating Flows using LBM

Behnaz Maneshian, Khodayar Javadi, Mohammad Taeibi-

rahni

Sharif University of Technology, Iran

Mo

nd

ay

11

Tuesday July 21

9:00 AM – 9:45 AM

MMME Keynote Lecture II – Room D:

Effect of Steel Metallurgy on Pipeline Corrosion Studied by

Micro-electrochemical Techniques

Frank Cheng


09:00 AM – 9:45 AM

HTFF Keynote Lecture II – Room C:

Closed loop Pulsating Heat Pipes at Variable Gravity Levels

Marco Marengo

University of Brighton, UK

9:45 AM – 10:05 AM Coffee Break

10:05 AM – 10:50 AM

ICCPE Keynote Lecture II – Room D:

Advanced Model Based Control of Chemical Systems

Zoltan K Nagy

Purdue University, USA

10:50 AM – 11:30 AM - Room D

Session Name:

Biomedical Materials

Session Chairs:

Dr. Hong Yong Sohn

10:50 AM – 11:10 AM

MMME 321: The Effect Of Microwave Drying On The

Sinterability Of Hydroxyapatite

Chou Yong Tan, Yee Ching Teh, Ramesh Singh, Yoke Meng

Tan

University of Malaya, Malaysia

11:10 AM – 11:30 AM

MMME 363: Third-Body Wear Behavior of Orthopaedic

Biopolymers

Binnur Sağbaş, M. Numan Durakbasa

Yildiz Technical University, Turkey

Sessio

n C

ha

irs:

Dr. P

ura

Alfo

nso

Sessio

n C

ha

irs:

Dr. Y

uy

ua

n Z

ha

o

Sessio

n C

ha

irs:

Dr. J

am

al C

ha

ou

ki

12

11:30 AM – 12:40 PM - Room D

Session Name:

Modeling & Simulation

Session Chairs:

Dr. Binnur Sağbaş

11:30 AM – 11:50 AM

MMME 325: Effects of heat treatment on mechanical

properties of VAR-cast Ti-6Al-4V alloy

Seong-Tak Oh, Kee-Do Woo, Tack Lee, Hae-Cheol Lee,

Whang-Jin Kang

Chonbuk National University, Korea

11:50 AM – 12:10 PM

MMME 330: Experimental and Numerical Study of Lateral

Collapse of Square and Rectangular Composite tubes

Sajjad Dehghanpour, S.Mohammad Reza khalili, Mohsen

Rahmani

Islamic Azad University, Iran

12:10 PM – 12:30 PM

ICMIE 245: Residual Stress and Deformation Modelling for

Metal Additive Manufacturing Processes

Heng Liu, Todd Sparks, Frank Liou, David M. Dietrich

Missouri University of Science and Technology, USA

12:30 PM – 12:40 PM

ICMIE 253: Analysing Regulatory Standards for Flight

Simulators

Chandra B. Asthana

Concordia University, Canada

10:50 AM – 12:40 PM - Room C

Session Name:

Laminar Fluid Flow and Heat Transfer

Session Chairs:

Dr. Yuwen Zhang

& Dr. Hilmi Kuscu

10:50 AM – 11:10 AM

HTFF 309: Numerical Analysis of Fluid Mixing in Three Split

and Recombine Micromixers at Different Inlets Flow Rate

Ratio

Vladimir Viktorov, Md Readul Mahmud, Visconte Carmen

Politecnico di Torino, Italy

Tu

esda

y

13

11:10 AM – 11:30 AM

HTFF 314: Woven Wire Gas-to-Liquid Heat Exchanger

Hannes Fugmann, Ahmed Junaid Tahir, Lena Schnabel

Fraunhofer Institute for Solar Energy Systems, Germany

11:30 AM – 11:50 AM

HTFF 313: Unsteady Stagnation-point Flow of a Second-

grade Fluid

Fotini Labropulu, Daiming Li

University of Regina, Canada

11:50 AM – 12:00 PM

HTFF 292: Non-Newtonian flows in stenotic vessels

Iqbal Husain, Chris Langdon, Justin Schwark

Luther College – University of Regina, Canada

12:00 PM – 12:20 PM

HTFF 324: Sedimentary Waves in Laminar Flows of

Pseudoplastic Fluids

Aldo Tamburrino, Felipe Negrete, Christian Ihle

University of Chile, Chile

12:20 PM – 12:40 PM

HTFF 291: Bifurcation and Pattern Variation of Mixed

Convection in a Vertical Channel

P. Bera, Manish K Khandelwal

Indian Institute of Technology Roorkee, India

12:40 PM – 1:40 PM Lunch

1:40 PM – 2:40 PM MMME’15 & ICMIE’15 Poster Session (View Page 17)

2:50 PM – 3:50 PM HTFF’15 & ICCPE’15 Poster Session (View Page 19)

1:40 PM – 3:00 PM - Room D

Session Name:

Heat, Mass and Momentum Transport II

Session Chairs:

Dr. Kyung Chun Kim

Tu

esda

y

14

1:40 PM – 2:00 PM

HTFF 325: Liquid diffusion measurements by digital speckle

photography (DSP): analysis of the PIV-mode approach

Dario Ambrosini, Domenica Paoletti, Giorgio Galli

University of L’Aquila, Italy

2:00 PM – 2:20 PM

HTFF 323: Simulation of Intermittent Drying of Corn

Oktay Hacıhafızoğlu, Çiğdem Susantez, Kamil Kahveci,

Erhan Akyol


2:20 PM – 2:40 PM

HTFF 311: Investigation of Moisture Distribution During

Soya Bean Seed Drying

Semiha Öztuna, Çiğdem Susantez, Mustafa Kemalettin

Büyükakın, Kamil Kahveci


2:40 PM – 3:00 PM

HTFF 320: Drying Simulation of Pumpkin Seed

Erhan Akyol, Çiğdem Susantez, Kamil Kahveci, Oktay

Hacıhafızoğlu, Yalçın Kaya


2:40 PM – 3:30 PM - Room C

Session Name: Mineral Processing & Safety II

Session Chairs:

Dr. Mina Roudgar

2:40 PM – 3:00 PM

MMME 316: Molecular Modelling and Docking Approach for

Predicting Potential Flotation Reagents

Peter Solozhenkin, Olga Ibragimova

University of Dodoma, Tanzania

3:00 PM – 3:10 PM

MMME 329: Study of LCA (Life Cycle Assessment) Method on

the Reduction of CO2 Emissions in Aggregate Production

Aishajiang Rouziaji, Naohiro Otsuka, Mitsugu Saito

Iwate University, Japan

Tu

esda

y

15

3:10 PM – 3:30 PM

MMME 335: A Practical Study to Predict Uniaxial

Compressive Strength of Turkish Marbles after Freeze Thaw

Test

Mikail Başyiğit, Hakan Tunçdemir, Ozan Bayram


3:30 PM – 3:50 PM Coffee Break

3:50 PM – 5:30 PM - Room D

Session Name:

Experimental Fluid Flow and Heat Transfer

Session Chairs:

Dr. Dario Ambrosini

3:50 PM – 4:10 PM

HTFF 276: The experimental validation of numerical

modeling of the air distribution in the indoor ice rink arena

Agnieszka Palmowska, Barbara Lipska

Silesian University of Technology, Poland

4:10 PM – 4:30 PM

HTFF 277: Numerical modelling of air distribution in the

natatorium supported by the experiment

Piotr Ciuman, Barbara Lipska, Grzegorz Burda


4:30 PM – 4:50 PM

HTFF 280: A Comparative Analysis of Interfacial Friction

Factor Correlations for Adiabatic Co-Current Gas–Liquid

Annular Two-Phase Flow in Large Diameter Pipes

Aliyu M. Aliyu, Liyun Lao, Hoi Yeung, Almabrok A

Almabrok

Cranfield University, UK

4:50 PM – 5:10 PM

HTFF 310: Study of characteristics for slant slit jet cooling

on hot rolled plate

Seongkyu See, Vladan Prodanovic, Matthias Militzer

POSCO, South Korea

5:10 PM – 5:30 PM

HTFF 333: Flow and Heat Transfer Characteristics in High

Porosity Metal Foams

Chanhee Moon, Kyung Chun Kim

Pusan National University, South Korea

Tu

esda

y

16

3:50 PM – 5:30 PM - Room C

Session Name:

Micro and Nano Fluids

Session Chairs:

Dr. Mina Roudgar

3:50 PM – 4:10 PM

HTFF 279: Nanofluids suppress secondary flow in laminar

pipe flow

Laura Colla, Laura Fedele, Matthias H. Buschmann

Institute of Construction Technologies, Italy

4:10 PM – 4:30 PM

HTFF 319: Effect of High-Prandtl Number on Microscale

Flow and Heat Transfer

Ubade Kemerli, Damla Özgür, Ayşegül Öztürk, Kamil

Kahveci


4:30 PM – 4:50 PM

HTFF 328: Analysis of Shock-plugs in Quasi-one-dimensional

Compressible Flow

Thomas Adams, Eric Chang, Benjamin Stevens, Matthew

Thompson

Rose-Hulman Institute of Technology, USA

4:50 PM – 5:10 PM

HTFF 306: Electro-osmotic Flow through a Rotating

Microchannel

Cheng Qi, Chiu-On Ng


5:10 PM – 5:30 PM

HTFF 281: Flow of Fluids and Solids at the Nanoscale

Thomas Prevenslik

QED Radiations, Hong Kong

8:00 PM – 10:00 PM Banquet Dinner

Tu

esda

y

17

MMME’15 & ICMIE’15

Poster Session July 21

1:40 PM – 2:40 PM

MMME 324: Improvement of Open Porosity as a Function of Compacting Pressure in Bulk

Graphite Manufacture by using Isotropic Graphite Powder

Sang Min Lee, Dong Su Kang, Jae Seung Roh

Kumoh National Institute of Technology, Korea

MMME 327: Characterisation of Jarosite, Fly Ash and Clay for their possible usage in the

construction industry

Mamookho E. Makhatha, Muneiwa O. Ndou, Willie Nheta, Mukuna P. Mubiayi


MMME 328: Preparation of TiO2-enriched material from Ti-bearing slag by acid roasting

Willie Nheta, Edward Malenga


MMME 331: Morphological Character Of Blasted Talc Particles On Talc Flotation

Onur Güven, Fırat Karakaş, Gökhan Yaşar, Mehmet S. Çelik


MMME 333: Treatment of Old Pyrite Flotation Tailings for Recovery of Non-Ferrous and Precious

Metals

Maxim Muravyov, Aleksandr Bulaev, Tamara Kondrat'eva

Russian Academy of Sciences, Russia

MMME 334: Accompanying Elements in Zinc Oxide Emitted from a Sintering Machine into the

Environment in Pyrometallurgical Process of Zinc and Lead Production

Zdzisław Adamczyk, Katarzyna Nowińska


MMME 337: Experimental characterization of physicochemical and geological properties of

granite from Olowu, Ibadan, Oyo State, Nigeria

S. Oluwagbemiga Alayande, Mukuna P. Mubiayi, Mamookho E. Makhatha, Rose Derek


18

MMME 340: Manufacture of Cobalt-Manganese Acetate(CMA) through remove the impurities from

Spent Cobalt-Manganese Bromide(CMB)

Sung-Ho Joo, Dong Ju Shin, Chang Hyun Oh, Shun Myung Shin

Korea Institute of Geoscience and Mineral Resources, Korea

MMME 342: Determination of the Environmental Conditions in an Underground Mine

Marc Bascompta, Lluís Sanmiquel


MMME 345: Experimental Study of Gas Emission, Distribution and Migration Rules in Mini Mine

Ventilation Network

Haoran Zhang, Lluis Sanmiquel Pera, Yaojiang Zhao, Marc Bascompta Massanes


MMME 353: Effect of Space Holder Content on Pore Morphology and Mechanical Properties in

HA/β-TCP Composites Consolidated by SPS

Tack Lee, Kee-Do Woo, Dong-Soo Kang, Hae-Cheol Lee, Seong-Tak Oh, Jun-Ho Jang

Chonbuk National University, Korea

MMME 357: Kinetics of Conversion of Concentrated Celestite Ore to Acid Strontium Oxalate

Monohydrate in Oxalic Acid Solutions

Mert Zoraga, Cem Kahruman, Ibrahim Yusufoglu

Istanbul University, Turkey

MMME 361: Mineral processing analysis in artisanal gold mining, Peru

Hernan Anticoi, Pura Alfonso, Marc Bascompta


MMME 362: Characterisation Of South African Waste Foundry Moulding Sand: Metallic

Contaminents

J.K Nyembwe, Mamookho E. Makhatha, T Madzivhandila and K.D Nyembwe


ICMIE 248: Determining the normalized Cockroft-Latham criterion for titanium alloy Ti6Al4V in

tensile testing at room temperature

Andrzej Gontarz, Jacek Piesiak

Lublin University of Technology, Poland

19

HTFF’15 & ICCPE’15

Poster Session July 21

2:50 PM – 3:50 PM

HTFF 286: Numerical Simulations of Magnetohydrodynamic Flows in a Misaligned Duct

Mengqi Zhu, Chang Nyung Kim

Kyung Hee University, South Korea

HTFF 287: Computational Analysis of MHD Flows in a Conduit with Multiple Channels under a

Magnetic Field

Yang Luo, Chang Nyung Kim

Kyung Hee University, South Korea

HTFF 295: Analysis of Modelling Capabilities of Ablative Fire-Proof Properties in Polymer Fibre

Composites in Conjunction with the Metal

R. Szczepaniak, P. Przybyłek, A. Komorek, S. Szczepaniak, R. Rudzki

Air Force Academy, Poland

HTFF 298: Model Development to Predict Mass Transfer of Particles onto a Flat Plate in Parallel

Airflow

Won-Geun Kim, Jung-Hun Noh, Se-Jin Yook


HTFF 299: Numerical Investigation of the Laminar Natural Convective Heat Transfer around a

Heated Cylinder inside an Enclosure

Jung-Hun Noh, Won-Geun Kim, Se-Jin Yook


HTFF 303: Superhydrophobicity and oleophobicity of transparent glass prepared by plasma etching

Taeho Son, Eunjin Yang, Ho-Young Kim

Seoul National University, South Korea

HTFF 308: Energy Simulation of a Heat Pump System with Thermal Storage according to Control

Strategies

Young Soo Chang, Byung Ha Kang, Choong-Sub Lee

Kookmin University, South Korea

20

ICCPE 244: Modification of Synthetic Resin Adsorbents

Tomohiro Kinoshita, Huan-Jung Fan, Takashi Kawakita, Eiji Furuya

Meiji University, Japan

ICCPE 253: Synthesis of Mesoporous Hollow Silica using NaA Zeolite as Sacrificial Cores and its

Application for Anchoring the chiral Catalyst

Huicheon Yang, Geunwoo Park, Yunjeong Hwang, Geonjoong Kim

University of Inha, Korea

ICCPE 254: Oxidative Dehydrogenation of butane by Modified Graphitic Catalysts

Yunjeong Hwang, Huicheon Yang, Geunwoo Park, Geon Joong Kim, Geonjoong Kim

Inha University, Korea

ICCPE 255: Fabrication of Nano-structured Ni metal for Use as a Catalyst in Hydrogenation

Reaction

Geun Woo Park, Hui Cheon Yang, Yun Jeong Hwang, Geon Joong Kim

Inha University, Korea

ICCPE 260: DNA Binding Activity of Some New Oximes as Anticancer and Antimicrobial Agents

Hatice Başpınar Küçük, Ayşe Yusufoğlu, Leyla Açık, Betül Aydın

Istanbul University, Turkey

ICCPE 262: Controlled Polymerization of Polymethylmethacrylate with Sulfone Containing Initiator

Tuba Çakır Çanak, İ.Ersin Serhatlı


ICCPE 264: Preparation of well-defined chitosan nanofibers by atom transfer radical

polymerization

Nilhan Kayaman-Apohan, Burcu Oktay, Serap Erdem-Kuruca

Marmara University, Turkey

EUROSTARS - Registrants from the four conferences are … · 2015-07-02 · Semih Onut, Mehmet...

Documents

Transcript of EUROSTARS - Registrants from the four conferences are … · 2015-07-02 · Semih Onut, Mehmet...