EURAMET, EMPIR, and ENVIRONMENT Maria Luisa Rastello EURAMET BoD.
-
Upload
roland-greene -
Category
Documents
-
view
253 -
download
0
Transcript of EURAMET, EMPIR, and ENVIRONMENT Maria Luisa Rastello EURAMET BoD.
EURAMET,EMPIR, and ENVIRONMENT
Maria Luisa Rastello
EURAMET BoD
Members:37 European NMIs
Associates:> 70 Designated Institutes holding national standards- JRC (IRMM)
EURAMET e.V.
bilateral co-operations since ≈ 1900EUROMET since 1990EURAMET e.V. since 2007
European Association of National Metrology Institutes
Cyprus
Traditional areas of industry- becoming more complex- requiring broader measurement ranges and lower uncertainties
Growing demand for Metrology
NMI budgets limited
Need for collaborationNeed for collaboration
• New areas of technologye.g. nano‑technology or biotechnology
• Areas in which use of metrology is increasingly recognised e.g. chemistry, clinical analysis, food safety, the Grand Challenges,…
EURAMET e.V.EURAMET e.V.
• Main programme for joint research on metrology• Implemented by EURAMET e. V.• Lifetime: 2014 – 2024 with annual calls between 2014 and 2020
• Different modules, each with a clear focus
• Main programme for joint research on metrology• Implemented by EURAMET e. V.• Lifetime: 2014 – 2024 with annual calls between 2014 and 2020
• Different modules, each with a clear focus
European Metrology Programme for Innovation and Research
2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022
iMERA-plus
EMRP A169/18563 M€, 1/3 from EU, 1 call 400 M€, 1/2 from EU, 5 calls
Horizon 2020FP7
EMPIR A185600 M€, 1/2 from EU, 7 calls
Metrology improves health care e.g. by earlier detection of diseases and patient protection e.g. from radiation, and fosters the competitiveness of related European industries and services.
Healthcare
Energy
Metrology for energy supports the successful implementation of smart electrical grids in Europe or improves efficiency in
traditional power plants with a considerable impact on reducing energy consumption and reduction of emissions.
Environment
Metrology for environment provides improved measurements for better understanding of the Earth’s weather and climate. It makes space-based measurements consistent for comparisons with data from other sources.
EMRP projects addressing Grand Challenges
Current EMRP portfolio: 17 health, nine energyand nine environment projects. Final EMRP Call addresses Energy and Environment
Current EMRP portfolio: 17 health, nine energyand nine environment projects. Final EMRP Call addresses Energy and Environment
Healthcare
EMRP 2009 – 2013
2009 Energy projects ended
2010Environment
projects endedMetrology for Industry
2011
Health
Projects endingSI broader scope
New Technologies
2012
Metrology for Industryprojects ongoing
SI broader scope
Open excellence call
2013
Environment projects ongoing
Energy
Healthcare
Environment Joint Research Projects - call 2010
ENV01
Metrology for Chemical Pollutants in Air
ENV02
Emerging requirements for measuring pollutants from automotive exhaust emissions
ENV03
Traceability for surface spectral solar ultraviolet radiation
ENV04
Towards a European Metrology Centre for Earth Observation and Climate
ENV05
Metrology for ocean salinity and acidity
ENV06
Spectral Reference Data for Atmospheric Monitoring
ENV07
Metrology for pressure, temperature, humidity and airspeed in the atmosphere
ENV08
Traceable measurements for monitoring critical pollutants under the European Water Framework Directive (WFD-2000/60/EC)
ENV09
Metrology for Radioactive Waste Management
Healthcare
Environment Joint Research Projects - call 2013
ENV51
Traceability for mercury measurements
ENV52
Metrology for high-impact greenhouse gases
ENV53
Metrology for earth observation and climate
ENV54
Metrology for decommissioning nuclear facilities
ENV55
Metrology for ammonia in ambient air
ENV56
Metrology for VOC indicators in air pollution and climate change
ENV57
Metrology for radiological early warning networks in Europe
ENV58
Metrology for essential climate variables
ENV59
Traceability for atmospheric total column ozone
ENV60
Metrology to underpin future regulation of industrial emissions
EURAMET EURAMET EMPIREMPIR European Metrology Programme for Innovation and Research
be the main programme for European research on metrology.
be jointly implemented by EURAMET’s member institutions.
be equally financed by EURAMET members and the European Union.
have different modules, each with a clear focus.
have a duration of 10 years with calls launched between 2014 and 2020.
extend the range of activities beyond research by including innovation
related, standardisation and capacity building activities.
open up for involvement of excellent research partners.
EMPIREMPIR
EEuropean uropean MMetrology etrology PProgramme for rogramme for IInnovation and nnovation and RResearchesearch
EMPIREMPIR
Duration: Duration: 2014 – 20222014 – 2022
CALLS: 7CALLS: 7
BUDGET: BUDGET: 600 M€600 M€ 50 % EU50 % EU50 % NMIs50 % NMIs
EURAMET EURAMET EMPIREMPIREuropean Metrology Programme for Innovation and Research
EMPIR broadens the scope, dedicated modules
Module 1: Science Fundamental scientific metrology
48 %Grand challenges Energy, Environment, Health
Module 2: InnovationIndustry-driven joint research
22 %Technology-transfer projects
Module 3: Pre-normative Pre- and co-normative metrology R&D 10 %
Module 4: Capacity building
R&D for measurement capabilities
15 %Research Potential and smaller scale capacity building measures
Programme Administration 5 %
EMPIR Module 1: Science
Module 1: Science Fundamental scientific metrologyGrand challenges
• Is about excellence-driven scientific metrology
• Addresses Grand Challenges, i.e. environment, energy, health
• Serves high-level interests of EU, WMO, ..
• Follows integrated approaches into standardization and for industry uptake
• The research agenda builds on roadmaps of EURAMET Technical Committeeshttp://www.euramet.org/index.php?id=roadmaps
Healthcare
Healthcare
Healthcare
Healthcare
EURAMET TG on “Metrology for Environment”
to monitor and report to EURAMET on new perspectives, emerging needs, projects and activities related to metrological traceability, quality assurance, reference methods and calibration procedures for environmental measurements; to advise EURAMET in cooperating with other RMOs, institutions, organizations, committees, scientific communities, users’ associations and other stakeholders, in order to provide guidance to an appropriate approach to traceability and good practice in metrology for environment; to consider the most effective means by which TCs involved in climate and environmental activities should cooperate in order to establish a common response to the stated needs of the communities working in environmental science; to support EURAMET in encouraging NMIs to work with the relevant environmental networks to support a monitoring framework for traceable environmental data over long temporal terms and wide spatial scales based on best practice metrology;
EMPIR Work ProgrammeCall Scope – Metrology for Environment (2016)
Metrology research underpins the management of natural resources by developing the ability to measure our environment.
The projects funded from the 2010 and 2013 EMRP Calls were directed at climate change, air quality, water quality, and radioactive waste.
Call Scope – Metrology for Environment (2016)
This Call again focuses on metrological research to improve the quality of data to stimulate technological innovation, and to disseminate traceability to, and make traceable measurements in, the field. It also aims to underpin other environmental research initiatives through collaborative metrological research and development
Call Scope – Metrology for Environment (2016)
This call addresses both
• local environmental challenges and
• global metrological challenges for climate monitoring
Call Scope – Metrology for Environment (2016)
It addresses both local environmental challenges such as those related to:• contamination of water, air and soil• radiation measurement and protection,
and acoustic noise• local pollutions and emissions measurements• monitoring of key parameters to detect local climate evolution
Call Scope – Metrology for Environment (2016)
and global metrological challenges for climate monitoring such as those related to:
• the essential climate variables of the atmosphere, land and water, including their constituents,
• contamination, transport and other parameters, and their time evolution and comparability
Call Scope – Metrology for Environment (2016)
and:• emission control; measurement of gases
and particles that have an effect on climate and health
• validated remote sensing for environmental and climate monitoring.
• measurements in extreme environments and challenging conditions
EURAMET wishes to put a focus on reliable climate data and especially welcomes proposals enabling the establishment of a long-term European NMI/DI network coordinating the measurement infrastructure in this area and links to a potential global network, in collaboration with user communities.
To enhance the impact of the R&D work, the involvement of the user community such as industry, academia, meteorology and climate research, standardisation and regulatory bodies, as appropriate, is strongly recommended.