Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.
-
Upload
tucker-pearcy -
Category
Documents
-
view
223 -
download
3
Transcript of Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.
![Page 1: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/1.jpg)
Ethernet Routing SwitchesStackable
Version 2.0.0
Last updated: Mar 2011
![Page 2: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/2.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Objectives
At the end of the training, you should be able to
Understand the difference between the ERS families
Understand basic setup for ERS Switches
Know your way around Device Manager (EDM) and a little CLI
Build a small converged network solution and have some fun!
![Page 3: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/3.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Agenda
Getting started– Which ERS– Standalone or Stack
Management– EDM and CLI– Configuring Management
Layer 2 – VLANs– Creating VLANS– Access or TAG
Layer 3 – Routing– IP interfaces– DHCP Relay
QoS– Roles– Typical settings
Energy Saver
![Page 4: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/4.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy. 4
Getting Started
Ideal as: Access Switch for Large Enterprises: high-performance Gigabit-to-the-
Desktop Aggregation (Distribution) Switch Core Switching solution for small Enterprises Top-of-Rack/Horizontal Stacking for the Data Centre Where 10GbE is required today
Ideal as: Access Switch for mid-to-large Enterprise Environments with either FE or GbE connectivity at the Edge, or both Where 10GbE Uplinks will become important
Ideal as: Access Switch for Branch Office or smaller Enterprise Campus: when Fast
Ethernet-only is appropriate Low-intensity convergence deployments Standard offering for the Small to Medium Enterprise
ERS 5000
ERS 4500
ERS 2500
![Page 5: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/5.jpg)
©2010 Avaya, Inc. All rights reserved. 5
Ethernet Routing Switch 2500 Series
Workhorse solution to empower Convergence
– 10/100 to the Desktop
– Power-over-Ethernet & QoS
– high speed local switching & Layer 3 Routing
– entry-level FAST 32
Integrated Access Control
– 802.1X with Extensions
– 802.1AB auto discovery for network & devices
Delivers flexibility to the Network Edge
Enable the Converged Branch
Highly-available local Stacking & connections to the Core
Scalable, pay-as-you-grow
Comprehensive QoS & access control capabilities
![Page 6: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/6.jpg)
©2010 Avaya, Inc. All rights reserved. 6
Features of the ERS 2500 Series
4 Switch options– 2526T & 2526T-PWR – 24 10/100
Desktop ports, plus 2 active Uplinks, PoE option
– 2550T& 2550T-PWR – 48 10/100 Desktop ports, plus 2 active Uplinks, PoE option
Uplink options of SFP, 1000T, or 10/100/1000T
PoE available on 50% of Desktop ports – Green..!
32Gbps Stacking architecture– Up to 384 10/100 ports
Wire-speed local switching & integrated Stacking
802.3af-compliant PoE
– Auto-sensing 10/100
– Auto-discovery of PoE devices
– Dynamic power management
Endpoint access control
– 802.1X SHSA, Guest VLAN, RADIUS Authentication
DiffServ & 802.1p Prioritisation
Traffic Marking & Re-Marking
Port Mirroring & Rate Limiting
802.3ad Link Aggregation (6 links)
![Page 7: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/7.jpg)
©2010 Avaya, Inc. All rights reserved. 7
Hardware
50-port Switches
2550T
2550T-PWR
26-port Switches
2526T
2526T-PWR
![Page 8: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/8.jpg)
©2010 Avaya, Inc. All rights reserved. 8
Flexible Advanced Stacking Architecture
Class-leading Stacking – the ERS 2500 Series implements FAST 32
– 4Gbps of Stacking capacity per Switch & up to 32Gbps for a Stack of 8
Scales up to 384 Ports of 10/100 Desktop plus up to 16 Ports for 10/100/1000 Combo Uplinks
Auto Unit Replacement software & configuration control
– Virtual Hot Swap
Consolidated Management via a single IP Address
Low-cost Stack cabling
Pre-enabled or field-upgradeable
Up to 8 Switches & 400 Ports
Uses low-cost Cat 5E UTP for Stacking
4Gbps Stacking per Switch & up to 32Gbps
ERS 2500 Series with FAST 32
![Page 9: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/9.jpg)
9
The ERS 2500 delivers 3 flexible options to meet customer needs
Flexible option to move to stacking
Standalone Stacked
• No need to purchase additional hardware
• Stacking is enabled via a software license
• Grow your network when/if YOU want to
• Units with stacking pre-enabled are available
• Ready to stack immediately
• No need for a stacking license Stack Enabled
Scalability from Day 1
Use ERS 2500s as single units
Standalone
• Ideal for smaller sites
• Budget-friendly option
Getting Started Standalone or Stacking
![Page 10: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/10.jpg)
10
ERS 2500s use the rear 1000BaseTX ports as stacking ports– Rear ports offer the flexibility to be used as either normal Gigabit ports or as
stacking ports.– Gigabit grade (Cat5E/Cat6) RJ-45 cabling is used to create the stacking ring– Stack up to 8 units high for 384 10/100 user ports and 16 Gigabit ports
Ethernet Routing Switch 2500 SeriesStacking Implementation
![Page 11: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/11.jpg)
11
– “Stacking Mode” must be configured on the rear ports before switches are connected together in a stack (there is no “auto-detection”).
– The Base unit must have Unit Select switch set to ON (one switch only)
– Each ERS2500 switch ships with a 46cm (1.5 foot) stack cable (black Cat5E cable).
– Additional cables of 1.5m (5’) and 3m (10’) are also be available for separate purchase from Avaya and are like “stack return” cables.
– Customers are permitted to use their own cables and longer lengths up to 100m (at customer’s risk, not “officially” supported by GNTS).
Port 28Cascade Up
Port 27Cascade Down
MODE:Standalone ->Stacking ->
Unit SelectBase
Port 28Cascade Up
Port 27Cascade Down
MODE:Standalone ->Stacking ->
Unit SelectBase
Ethernet Routing Switch 2500 SeriesStacking Functionality and Rear Ports
![Page 12: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/12.jpg)
12
Ethernet Routing Switch 4500 Series
Scalable solution to empower Convergence
– 10/100 or 10/100/1000 to the Desktop, Fixed 100FX & SFP options
– Power-over-Ethernet & QoS– fail-safe FAST 320– high-speed local switching & Layer
3 Routing Integrated Access Control
– 802.1X with extensions Delivers 99.999% reliability to the
Network Edge
Enable the Converged Desktop
Comprehensive access control options
High-availability locally & to the Core
Scalable, pay-as-you-grow
Can mix FE and GE Switches in a stack
10/100/1000 & 10G Switches10/100 Switches
![Page 13: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/13.jpg)
13
Features of the ERS 4500 Series
11 Switch options– 4526FX– 4526T & 4526T-PWR– 4550T & 4550T-PWR– 4524GT & 4524GT-PWR– 4526GTX & 4526GTX-PWR– 4548GT & 4548GT-PWR
High density solution:– 400/384 ports of 10/100 or
10/100/1000 with PoE & 10GbE options
– SFP & FX options 184Gbps of local switching & 40Gbps
Stacking throughput per Switch
802.3af-compliant PoE
– Auto-sensing 10/100/1000
– Auto-discovery of PoE devices
– Dynamic power management
End-point access control
– 802.1X plus extensions (SHMA, MHMA, Guest VLAN, etc)
Automatic Unit Replacement
Traffic Policing, DiffServ & 802.1p Prioritisation
IP Filtering, Policies, & Offset
Redundant Power option
![Page 14: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/14.jpg)
14
Hardware
Gigabit Ethernet Switches
4524GT & 4524GT-PWR
4526GTX & 4526GTX-PWR
4548GT & 4548GT-PWR
Fast Ethernet Switches
4526FX
4526T & 4526T-PWR
4550T & 4550T-PWR
![Page 15: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/15.jpg)
15
Evolution of redundant self-healing stacking first introduced in 1998
Support for up to 8 units in a stack– Can mix any ERS4500 switch in the stack– Maximum 400 10/100 ports in a stack– Maximum 384 10/100/1000 ports in a stack– Up to 32 SFP GBICs in a stack for uplinks
Built-in Hi-Stack stacking ports come standard on the switch– Stacking cable (46cm / 18”) included with each switch– Loopback stacking cable for resilient stacking must be purchased separately
True resilient stack IP Management
Load-balancing and fail-over protection with Distributed MLT and 802.3ad
Automatic Unit Replacement Functionality to automatically reconfigure any replaced unit
Grow as you Stack from 1 to 8 units as one reliable managed entity
Flexible Advanced Stacking Technology
Return Cable creates resilient configuration
![Page 16: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/16.jpg)
16
Agenda
Getting Started
Management – EDM and CLI– Configuring management
L2- VLANs
L3 - Routing
QOS
Energy Saver
![Page 17: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/17.jpg)
17
Enterprise Device Manager - EDMFeature Overview
EDM is a new embedded web based management system.– EDM uses Web2.0 and J2EE framework – more up to date– Improved workflows, selections and GUI configuration completeness
EDM REPLACES both JDM and WebUI graphical configuration and element interfaces.
– Integrated into the agent code of the switch, no longer requiring the right version of JDM to support chosen platforms.
HTTP and HTTPS browser support– Tested and supported by: IE 7.0 and FireFox 3.0 and above.
New on ERS 2500 4.3 / 4500 v5.4 / 5x00 v6.2
![Page 18: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/18.jpg)
18
Enterprise Device Manager - EDM Main Screens EDM Landing Page – Switch Summary
– Navigation Tree – “Configuration” folder already open with sub folders
![Page 19: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/19.jpg)
19
Enterprise Device Manager - EDM Main Screens - II EDM – Device Physical View tab
– can launch pull-down menu off ports
![Page 20: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/20.jpg)
20
Enterprise Device Manager - EDM Main Screens - III EDM – Edit > Chassis > Chassis
– General switch system information
![Page 21: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/21.jpg)
21
Enterprise Device Manager - EDM Main Screens - IV EDM – Configuration > VLAN > VLANs
– VLAN creation – white cells can be edited
![Page 22: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/22.jpg)
22
Enterprise Device Manager - EDM Main Screens -V EDM – QoS > QoS Devices
– NOTE: EDM opens new selections in new Tabs in the main view
![Page 23: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/23.jpg)
23
Enterprise Device Manager - EDM EDM Help Files
The help files for EDM are not integrated into the switch agent code and are downloaded to the switch when required by the agent.
– Help file must be located on TFTP server or USB drive. EDM Help file configuration in CLI
– CLI commands:
edm help-file-path <path> [tftp address <ip>]
show edm help-file-path
Set Help file path (config)(config)# edm help-file-path /help tftp address 10.16.5.222
Show Help file path(config)# show edm help-file-path TFTP Server Address 10.16.5.222 /help
![Page 24: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/24.jpg)
24
Enterprise Device Manager - EDM EDM Help file configuration - EDM EDM – Help File location configuration
– EDM uses TFTP to access Help File documents
Install the help files one directory below the root on the TFTP server
Setup the help files location on TFTP server
![Page 25: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/25.jpg)
25
Enterprise Device Manager - EDM HELP Screens EDM – MultiLink Trunks Help (example)
– NOTE: when you click on Help – the related documentation is TFTP’d to the switch.
Help Sub-menu on setting up MLTs
![Page 26: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/26.jpg)
26
Command Line Interface (CLI)Feature overview Serial Console
– 9600– No parity– No flow control– Straight cable– Ctrl Y to start
Telnet
SSH– Requires ‘secure’ agent image– i.e. 2500_431025s.img
![Page 27: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/27.jpg)
27
Show running-config Enhancements Show and Copy commands - CLI
The default behavior of the ‘show running-config’ command has changed: it is now displaying only the CLI commands with non-default parameters.
The new CLI syntax for ‘show running-module’ is:# show running-config [verbose][module {[802.1ab] [aaur] [adac] [arp-inspection] [aur] [banner] [core]
[dhcp-relay] [dhcp-snooping] [eap] [interface] [ip] [ip-source-guard] [ipmgr] [ipv6] [l3] [l3-protocols] [lacp] [logging] [mac-security] [mlt] [poe] [port-mirroring] [qos] [rate-limit] [rmon] [rtc] [snmp] [ssh] [ssl] [stack] [stkmon] [stp] [vlacp] [vlan]}]
The new CLI syntax for ‘copy running-config’ is:# copy running-config tftp [verbose] [module {[802.1ab] [aaur] [adac] [arp-inspection] [aur] [banner] [core]
[dhcp-relay] [dhcp-snooping] [eap] [interface] [ip] [ip-source-guard] [ipmgr] [ipv6] [l3] [l3-protocols] [lacp] [logging] [mac-security] [mlt] [poe] [port-mirroring] [qos] [rate-limit] [rmon] [rtc] [snmp] [ssh] [ssl] [stack] [stkmon] [stp] [vlacp] [vlan]}] [address <XXX.XXX.XXX.XXX>] filename <WORD>
Note: optional parameters shown in RED
![Page 28: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/28.jpg)
28
Show running-config Enhancements Usage examples - CLI Display the non-verbose configuration of a switch/stack:
# show running-config ! Embedded ASCII Configuration Generator Script! Model = Ethernet Routing Switch 2526T (Stack Enabled)! Software version = v4.3.0.073 ! ! Displaying only parameters different to default !================================================ enable configure terminal ! ! *** CORE *** ! !! *** SNMP ***! ! ! *** IP *** ! ! …!! *** STACK MONITOR ***!
NOTE: the output above is for a switch/stack reset to default
Copy the non-verbose configuration of a switch/stack to a TFTP server:# copy running-config tftp address 10.100.100.1 filename stack.cfg
![Page 29: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/29.jpg)
29
Show running-config Enhancements Usage examples – CLI (cont) Display the non-verbose configuration for the specified applications:
#show running-config module mlt stp vlan! Embedded ASCII Configuration Generator Script! Model = Ethernet Routing Switch 2526T (Stack Enabled)! Software version = v4.3.0.073!! Displaying only parameters different to default!================================================enableconfigure terminal!! *** STP (Phase 1) ***!!! *** VLAN ***!!! *** MLT (Phase 1) ***!!! *** STP (Phase 2) ***!!! *** VLAN Phase 2***!!! *** MLT (Phase 2) ***!
NOTE: the output above is for a switch/stack reset to default
Copy non-verbose configuration for the specified applications to a TFTP server:#copy running-config tftp module mlt stp vlan address 10.100.100.1 filename mlt_stp_vlan.cfg
![Page 30: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/30.jpg)
30
Display the verbose configuration of a switch/stack:# show running-config verbose ! Embedded ASCII Configuration Generator Script ! Model = Ethernet Routing Switch 2526T (Stack Enabled) ! Software version = v4.3.0.073 ! ! Displaying all switch parameters !==================================================== enable configure terminal ! ! *** CORE *** ! autosave enable mac-address-table aging-time 300 autotopology sntp server primary address 0.0.0.0 sntp server secondary address 0.0.0.0 …!! *** STACK MONITOR ***!no stack-monitor enablestack-monitor stack-size 2stack-monitor trap-interval 60
Copy the verbose configuration of a switch/stack to a TFTP server:# copy running-config tftp verbose address 10.100.100.1 filename stack_ver.cfg
Show running-config Enhancements Usage examples – CLI (cont)
![Page 31: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/31.jpg)
31
Display the verbose configuration for the specified applications:# show running-config verbose module mlt stp vlan ! Embedded ASCII Configuration Generator Script ! Model = Ethernet Routing Switch 2526T (Stack Enabled) ! Software version = v4.3.0.073 ! ! Displaying all switch parameters !==================================================== enable configure terminal ! ! *** STP (Phase 1) *** ! spanning-tree cost-calc-mode dot1d spanning-tree port-mode auto spanning-tree priority 8000 spanning-tree hello-time 2 spanning-tree forward-time 15 max-age 20 no spanning-tree 802dot1d-port-compliance enable ! ! *** VLAN *** ! vlan ports 1/1-26,2/1-26 tagging unTagAll filter-untagged-frame disable filter-unregistered-frames enable priority 0vlan configcontrol flexible vlan members 1 1/1-26,2/1-26 vlan ports 1/1-26,2/1-26 pvid 1vlan igmp unknown-mcast-no-flood disable vlan igmp 1 snooping disable…
Show running-config Enhancements Usage examples – CLI (cont)
![Page 32: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/32.jpg)
32
…vlan igmp 1 proxy disable robust-value 2 query-interval 125 vlan configcontrol strict auto-pvid! ! *** MLT (Phase 1) *** ! no mlt mlt 1 name "Trunk #1" disable member NONE mlt 1 learning normal mlt 1 loadbalance basicmlt 2 name "Trunk #2" disable member NONE mlt 2 learning normal mlt 2 loadbalance basic mlt 3 name "Trunk #3" disable member NONEmlt 3 learning normalmlt 3 loadbalance basicmlt 4 name "Trunk #4" disable member NONEmlt 4 learning normalmlt 4 loadbalance basicmlt 5 name "Trunk #5" disable member NONEmlt 5 learning normalmlt 5 loadbalance basicmlt 6 name "Trunk #6" disable member NONEmlt 6 learning normalmlt 6 loadbalance basic!…
Show running-config Enhancements Usage examples – CLI (cont)
![Page 33: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/33.jpg)
33
…! *** STP (Phase 2) ***!spanning-tree port-mode normalinterface FastEthernet ALLspanning-tree port 1/1-26 learning normalspanning-tree port 2/1-26 learning normalspanning-tree port 1/1-24 cost 10 priority 80spanning-tree port 1/25-26 cost 1 priority 80spanning-tree port 2/1-24 cost 10 priority 80spanning-tree port 2/25-26 cost 1 priority 80spanning-tree bpdu-filtering port 1/1-26 timeout 120no spanning-tree bpdu-filtering port 1/1-26 enablespanning-tree bpdu-filtering port 2/1-26 timeout 120no spanning-tree bpdu-filtering port 2/1-26 enableexit!! *** VLAN Phase 2***!vlan mgmt 1!! *** MLT (Phase 2) ***!
Copy the verbose configuration for the specified applications to a TFTP server#copy running-config tftp verbose module mlt stp vlan address 10.100.100.1 filename
mlt_stp_vlan_ver.cfg
Show running-config Enhancements Usage examples – CLI (cont)
![Page 34: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/34.jpg)
34
Agenda
Getting Started
Management – EDM and CLI– Configuring management
L2- VLANs
L3 - Routing
QOS
Energy Saver
![Page 35: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/35.jpg)
Initial Switch/Stack SetupQuick Start
ERS2500> enableERS2500# install
Welcome to the 2550T-PWR setup utility.You will be requested for information to initially configure for the switch.When finished the information will be applied and stored in the switch NVRAM.
Once the basic parameters are configured, additional configuration canproceed using other management interfaces. Press ^C to abort at any time.
###############################################################################
Please provide the in-band IP Address[10.16.5.4]:Please provide the in-band sub-net mask[255.255.255.0]:Please provide the Default Gateway[10.16.5.254]:Please provide the Read-Only Community String[**********]:Please provide the Read-Write Community String[**********]:Please provide the Quick Start VLAN <1-4094> [5]:Please provide the in-band IPV6 Address/Prefix_length[::/0]:Please provide the in-band IPV6 Default Gateway[::]:
###############################################################################Basic switch parameters have now been configured and saved.
###############################################################################
35
![Page 36: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/36.jpg)
Initial Switch/Stack Setup Manual via CLI
ERS2500-Rack3# show running-config
! Embedded ASCII Configuration Generator Script! Model = Ethernet Routing Switch 2550T-PWR! Software version = v4.3.1.025!! Displaying all switch parameters!====================================================enableconfigure terminal
!! *** IP ***!ip default-gateway 10.16.5.254ip address stack 0.0.0.0ip address switch 10.16.5.4ip address netmask 255.255.255.0
!! *** VLAN ***!vlan mgmt 5
36
![Page 37: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/37.jpg)
37
Extended IP ManagerFeature Overview
IP Manager enables administrators to restrict access to network services such as web, snmp and telnet (for IPv4 & IPv6).
The IP Manager function which controls management connectivity to the switch has been extended to support IPv6 and SSH in ERS2500 release v4.3.
Example section of IP Manager in ACG:! *** IP Manager ***!telnet-access enablesnmp-server enableweb-server enablessh-server enableipmgr telnetipmgr snmpipmgr webipmgr sshipmgr source-ip 1 0.0.0.0 mask 0.0.0.0ipmgr source-ip 2 255.255.255.255 mask 255.255.255.255…ipmgr source-ip 51 ::/0ipmgr source-ip 52 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff/128…
NOTE: new options are in RED (‘s’ agent image must be loaded to support ssl)
![Page 38: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/38.jpg)
38
Agenda
Getting Started
Management
L2- VLANs– Creating Vlans– Access or Tag
L3 - Routing
QOS
Energy Saver
![Page 39: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/39.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
VLAN Configuration Control*
VLAN Config Control
Automatic AutoPVID Flexible Strict
(default)
Operations As you change the vlan the PVID changes accordingly
As you add a Vlan the PVID changes to the new vlan
As you add a Vlan the PVID remains set to the first vlan
To change Vlan the port has to be removed from the previous vlan
VLAN - PVID
Set to the Vlan ID
Set to the Last Vlan ID
Set to the First Vlan ID
Set to the Vlan ID
# of VLANs
/Access port
One only Multiple Multiple One Only
*Note: Applies to Untag All and Tag PVID Only ports
![Page 40: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/40.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Vlan Configuration Control
Automatic :-– VLAN Membership: Automatically adds an untagged port to
a new VLAN and automatically removes it from any previous VLAN membership.
– PVID of the port: is automatically changed to the VID of the VLAN it joins.
AutoPVID :-– When an untagged port is added to a new VLAN, the port is
added to the new VLAN and the PVID is assigned to the new VID without removing it from any previous VLAN memberships. Using this option, an untagged port can have membership in multiple VLANs
![Page 41: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/41.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Vlan Configuration Control
Flexible:-– Similar to AutoPVID. When this option is used, an untagged
port can belong to an unlimited number of VLANs.
– Any new additions of an untagged port to a new VLAN does not change the PVID of that port
Strict:-– The factory default, this selection restricts the addition of an
untagged port to a VLAN if it is already a member of another VLAN.
– To add an untagged port to a new VLAN, a port must be remove from all other VLANs of which it is a member before adding it to the new VLAN. The PVID of the port is changed to the new VID to which it was added.
![Page 42: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/42.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Ethernet Ports modes
Port Mode # Vlan Tagging
Access Depends on Config Ctrl
No Tagging
Tag All (Trunk) Multiple Tag all Vlans
Untag PVID Multiple Tag all Vlans except the PVID (Default vlan)
Tag PVID Multiple Tag only the PVID no other
![Page 43: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/43.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
L2 - VLANsChanging VlanConfigControl
43
![Page 44: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/44.jpg)
L2 - VLANsCreate VLAN
44
![Page 45: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/45.jpg)
L2 - VLANsCreate VLAN
45
![Page 46: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/46.jpg)
L2 - VLANsCreate VLAN
46
![Page 47: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/47.jpg)
L2 - VLANsRemoving Ports
47
![Page 48: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/48.jpg)
L2 - VLANsAdding Ports
48
![Page 49: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/49.jpg)
L2 - VLANsAdding Ports
49
![Page 50: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/50.jpg)
L2 - VLANsApply Changes
50
![Page 51: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/51.jpg)
L2 - VLANsSupport for Voice and Data on one port
51
Select and Right Click Port 18-24, Select Edit
![Page 52: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/52.jpg)
L2 - VLANsSupport for Voice and Data on one port
52
![Page 53: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/53.jpg)
53
Agenda
Getting Started
Management
L2- VLANs
L3 – Routing– IP Interfaces– DHCP Relay
QOS
Energy Saver
![Page 54: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/54.jpg)
54
IP Local and Static RoutingFeature Overview
Support up to 256 locally configured routing instances. Provides static route support Supports IP blocking (for different stack failures) Allows the switch to be managed through any IP address that has been
assigned to any VLAN interface (not just the management VLAN).– When IP routing is enabled, the existing Switch / Stack IP address is
assigned to the management VLAN interface.
![Page 55: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/55.jpg)
L3 RoutingEnable IP forwarding
55
![Page 56: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/56.jpg)
L3 RoutingAdding an IP interface to a VLAN
56
![Page 57: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/57.jpg)
L3 RoutingAdding an IP interface to a VLAN
57
![Page 58: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/58.jpg)
L3 RoutingAdding an IP interface to a VLAN
58
![Page 59: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/59.jpg)
L3 RoutingAdding an IP interface to a VLAN
59
![Page 60: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/60.jpg)
L3 RoutingAdding an IP interface to a VLAN
60
![Page 61: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/61.jpg)
L3 RoutingAdding an IP interface to a VLAN
61
![Page 62: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/62.jpg)
L3 RoutingAdding an IP interface to a VLAN
62
![Page 63: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/63.jpg)
63
Managing global IP config to enable / disable IP routing(config)# ip routing
Enables IP routing globally(config)# no ip routing
Disables IP routing globally
Managing VLAN IP routing:(config)# interface vlan 7(config-if)# ip address <IP> <mask> [<mac-offset>]
Enables/disables IP routing on a VLAN
– Example: (config-if)# ip address 172.16.7.1 255.255.255.0 7(config-if)# no ip address 172.16.7.1 255.255.255.0
L3 RoutingIP Local and static Routing
![Page 64: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/64.jpg)
L3 RoutingIP Local and static Routing
64
Creating a static route:(config)# ip route <IP> <dest-mask> <next-hop> [<cost: 1-65535> | <weight: 1-
65535>] enable– Example:
(config)# ip route 0.0.0.0 0.0.0.0 172.16.1.1 ena Change the weight (or cost) of a static route:
– Example: (config)# ip route 0.0.0.0 0.0.0.0 172.16.1.1 weight 40
Enable / disable / delete a static route:– Examples:
(config)# ip route 0.0.0.0 0.0.0.0 172.16.1.1 enable(config)# ip route 0.0.0.0 0.0.0.0 172.16.1.1 disable(config)# no ip route 0.0.0.0 0.0.0.0 172.16.1.1
NOTE: In order for a static route to become active, the configured next-hop IP address must be reachable.
![Page 65: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/65.jpg)
65
# show ip routingIP Routing is enabledIP ARP life time is 21600 seconds
# show vlan ip==============================================================================Vid ifIndex Address Mask MacAddress Offset Routing==============================================================================Primary Interfaces------------------------------------------------------------------------------1 10001 172.16.1.50 255.255.255.0 00:1D:42:36:EC:40 1 Enabled3 10003 172.16.3.1 255.255.255.0 00:1D:42:36:EC:42 3 Enabled4 10004 172.16.4.1 255.255.255.0 00:1D:42:36:EC:43 4 Enabled5 10005 172.16.5.1 255.255.255.0 00:1D:42:36:EC:44 5 Enabled6 10006 172.16.6.1 255.255.255.0 00:1D:42:36:EC:45 6 Enabled7 10007 172.16.7.1 255.255.255.0 00:1D:42:36:EC:46 7 Enabled------------------------------------------------------------------------------% Total of Primary Interfaces: 6
L3 Routing IP Local and Static Routing
![Page 66: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/66.jpg)
66
# show ip route=============================================================================== Ip Route===============================================================================DST MASK NEXT COST VLAN PORT PROT TYPE PRF-------------------------------------------------------------------------------0.0.0.0 0.0.0.0 172.16.1.1 40 1 1/1 S IB 510.0.0.0 255.0.0.0 172.16.1.1 10 1 1/1 S IB 5172.16.1.0 255.255.255.0 172.16.1.50 1 1 ---- C DB 0172.16.3.0 255.255.255.0 172.16.3.1 1 3 ---- C DB 0172.16.4.0 255.255.255.0 172.16.4.1 1 4 ---- C DB 0172.16.5.0 255.255.255.0 172.16.5.1 1 5 ---- C DB 0172.16.6.0 255.255.255.0 172.16.6.1 1 6 ---- C DB 0172.16.7.0 255.255.255.0 172.16.7.1 1 7 ---- C DB 0Total Routes: 8-------------------------------------------------------------------------------TYPE Legend:I=Indirect Route, D=Direct Route, A=Alternative Route, B=Best Route, U=Unresolved Route, N=Not in HW
L3 Routing Local and Static Routing
![Page 67: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/67.jpg)
67
L3 Routing IP Routing ARP Management
>Create / remove a static ARP entry:(config)# ip arp <IP> <MAC> <unit/port> [vid <1 - 4094>]
>Example: (config)# ip arp 172.16.3.10 00:13:60:c2:62:ee 1/3 vid 3(config)# no ip arp 172.16.3.10 00:13:60:c2:62:ee 1/3 vid 3
>Enable / Disable ARP response per VLAN:>Example: (config-if)# ip arp response(config-if)# no ip arp response
>Configuring the ARP Aging time:>Example:(config)# ip arp timeout 720
![Page 68: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/68.jpg)
68
L3 Routing IP Routing ARP Management # show ip arp (or show arp)=============================================================================== IP ARP===============================================================================IP Address Age (min) MAC Address VLAN-Unit/Port/Trunk Flags-------------------------------------------------------------------------------172.16.3.255 0 ff:ff:ff:ff:ff:ff VLAN#3 LB172.16.4.255 0 ff:ff:ff:ff:ff:ff VLAN#4 LB172.16.5.255 0 ff:ff:ff:ff:ff:ff VLAN#5 LB172.16.6.255 0 ff:ff:ff:ff:ff:ff VLAN#6 LB172.16.7.255 0 ff:ff:ff:ff:ff:ff VLAN#7 LB172.16.1.255 0 ff:ff:ff:ff:ff:ff VLAN#1 LB172.16.1.14 65 00:15:60:c2:62:4d VLAN#1-1/1 D172.16.1.50 0 00:1d:42:36:ec:40 VLAN#1 L172.16.3.10 0 00:13:60:c2:62:ee VLAN#3-1/3 S172.16.3.1 0 00:1d:42:36:ec:42 VLAN#3 L172.16.4.1 0 00:1d:42:36:ec:43 VLAN#4 L172.16.5.1 0 00:1d:42:36:ec:44 VLAN#5 L172.16.6.1 0 00:1d:42:36:ec:45 VLAN#6 L172.16.7.1 0 00:1d:42:36:ec:46 VLAN#7 L172.16.1.1 60 00:13:49:4b:04:74 VLAN#1-1/1 D172.16.3.0 0 ff:ff:ff:ff:ff:ff VLAN#3 LB172.16.4.0 0 ff:ff:ff:ff:ff:ff VLAN#4 LB172.16.5.0 0 ff:ff:ff:ff:ff:ff VLAN#5 LB172.16.6.0 0 ff:ff:ff:ff:ff:ff VLAN#6 LB172.16.7.0 0 ff:ff:ff:ff:ff:ff VLAN#7 LB172.16.1.0 0 ff:ff:ff:ff:ff:ff VLAN#1 LBTotal ARP entries : 21-------------------------------------------------------------------------------Flags Legend:S=Static, D=Dynamic, L=Local, B=Broadcast
![Page 69: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/69.jpg)
69
Agenda
Getting Started
Management
L2- VLANs
L3 – Routing– IP Interfaces– DHCP Relay
QOS
Energy Saver
![Page 70: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/70.jpg)
70
L3 Routing BootP/DHCP Relay
In order to obtain an IP address a BootP or DHCP client will broadcast the request on the local subnet. When routing is enabled on the VLAN, these broadcasts are not forwarded by the router.
This is where the Bootp/DHCP relay is applicable. The relay agent intercepts these Bootp/DHCP requests and forwards then to the specified host or broadcast address on another routed VLAN.
Up to 10 DHCP/BootP servers may be identified as destinations to the relay.
![Page 71: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/71.jpg)
L3 RoutingDHCP Relay
71
![Page 72: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/72.jpg)
L3 RoutingDHCP Relay
72
![Page 73: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/73.jpg)
L3 RoutingDHCP Relay
73
![Page 74: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/74.jpg)
74
L3 Routing DHCP Relay config commands Enable / disable DHCP relay globally(config)# ip dhcp-relay fwd-path <agent-ip> <server-ip> <enable|disable>
– Example: (config)# ip dhcp-relay fwd-path 172.16.6.1 172.16.4.2 enable(config)# ip dhcp-relay fwd-path 172.16.6.1 172.16.4.2 disable
Add / remove a bootp/DHCP server(config)# ip dhcp-relay fwd-path <agent-ip> <server-ip>[mode <bootp | bootp-dhcp | dhcp>]
– Example: (config-if)# ip dhcp-relay fwd-path 172.16.6.1 172.16.4.2 mode bootp(config-if)# no ip dhcp-relay fwd-path 172.16.6.1 172.16.4.2 mode bootp
IP VLAN DHCP-relay configuration options– Examples: (config)#interface vlan 4(config-if)#ip dhcp-relay ? broadcast enable DHCP relay broadcast on this vlan clear-counters Clear dhcp-relay counters min-sec configure the backup dhcp server minimum wait time mode dhcp mode
![Page 75: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/75.jpg)
75
L3 Routing DHCP Relay show commands
(config)# show ip dhcp-relayDHCP relay is enabled
(config)# show ip dhcp-relay fwd-path============================================================= DHCP=============================================================INTERFACE SERVER ENABLE MODE-------------------------------------------------------------172.16.3.1 172.16.4.255 TRUE DHCP & BOOTP172.16.6.1 172.16.4.2 FALSE DHCP & BOOTP
(config)# show ip dhcp-relay countersINTERFACE REQUESTS REPLIES-------------------------------------------172.16.1.50 0 0172.16.7.1 0 0172.16.6.1 0 0172.16.5.1 0 0172.16.4.1 0 0172.16.3.1 16 4
![Page 76: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/76.jpg)
76
Agenda
Getting Started
Management
L2- VLANs
L3 – Routing
QOS– IP Interfaces– DHCP Relay
Energy Saver
![Page 77: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/77.jpg)
77
Avaya Ethernet Routing Switch 2500/4500Intelligent Flexibility
DiffServ Code Point (DSCP) classification and prioritization– Prioritizes, marks, remarks, filters and classifies DSCP markings within the
IP packet to ensure different applications are prioritized within the switch and the network
802.1p Prioritization– Provides basic traffic prioritization with 8 802.1p priorities
Changing the rules with intelligent flexibility
Incoming Traffic
1
3
5
Low Priority
Normal Priority
Medium Priority
High Priority
Priorities
76
4
2
0Hardware Queues
1
2
3
4
Outgoing Traffic
![Page 78: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/78.jpg)
78
Advanced QoSFeature Overview
QoS functions supported include: – L2-L4 traffic classification, – filtering (forward/drop), – marking/remarking of DSCP, – Policing/metering and – egress Shaping.
QoS configuration fully supported in CLI and EDM (GUI).
Advanced QoS support across all current stackable switching families.
![Page 79: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/79.jpg)
79
DiffServ and 802.1p are the underlying technology for all QoS configurations.
The ERS Series supports the following QoS classes:– Critical and Network classes have the highest priority over all other traffic.– Premium class is an end-to-end service functioning similarly to a virtual
leased line. Traffic in this service class is normally guaranteed an agreed-upon peak bandwidth. Traffic requiring this service must be shaped at the network boundary in order to undergo a negligible delay and delay variance. This service class is suitable for real-time applications, such as video and voice over IP. The recommended PHB for this service is the Expedited Forwarding (EF) PHB.
– Platinum, Gold, Silver, and Bronze classes use the Assured Forwarding (AF) PHB. These classes are used for real-time, delay-tolerant traffic and non-real-time, mission-critical traffic.
– Standard class is the best-effort IP service with an additional, optional use of traffic classification that is used at the network boundary to request a better effort treatment for packets that are in-profile (packets that do not break the service agreements between the user & the service provider).
Advanced QoSQoS Concepts
![Page 80: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/80.jpg)
80
Port-based Quality of Service: policies are applied directly to individual ports.
A port-based Quality of Service environment allows for the more direct application of Quality of Service policies and eliminates the need to group ports together when assigning policies.
Role-based Quality of Service: individual ports are first assigned to a role and that role was assigned a policy. A role is a collection of ports defined within the same interface group. They share settings. For example, all ports are defined as untrusted.
Port-based and role-based policies can be applied to same port; however the switch administrator is responsible for the proper division of resources across the individual policies.
At factory default, ports are assigned to the default interface group (role combination), which is named allQoSPolicyIfcs.
Advanced QoSQoS Concepts cont…
![Page 81: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/81.jpg)
81
Interface groups are used in the creation of role-based policies. Role-based policies differ from port-based policies in the fact that role-
based policies group ports together to apply a common set of rules to them.
Each port can belong to only one interface group. When you move a port to another interface group (role combination),
the classification elements associated with the previous interface group are removed and the classifications elements associated with the new interface group are installed on the port.
At factory default, ports are assigned to the default interface group (role combination), which is named allQoSPolicyIfcs.
All ports must be removed from an interface group before it is deleted. An interface group cannot be deleted when it is referenced by a policy.
Advanced QoSInterface Groups
![Page 82: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/82.jpg)
82
The classifications of trusted, untrusted, and unrestricted actually apply to groups of ports (interface groups).
Trusted interfaces — IPv4 traffic received on trusted interfaces is re-marked at the layer 2 level, that is, the 802.1p user priority value is updated based on the DSCP value in the packet at ingress and the installed DSCP-to-CoS mapping data. The DSCP value is not updated.
Untrusted interfaces — IPv4 traffic received on untrusted interfaces is re-marked at the layer 3 level—that is, the DSCP value is updated.
Unrestricted interfaces – Does not change DSCP or 802.1p setting.
Advanced QoSInterface Types
![Page 83: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/83.jpg)
83
Advanced QoSQoS Components
IP Element
• IP address type• IP flow identifier
• IP source address/mask• IP destination address/mask
• IP protocol type/IPv6 next-header• IP DSCP value
• IP L4 source port • IP L4 dest port
Classifier Blocks
Classifier
L2 Element
• Source MAC• Destination MACVLAN ID number
• VLAN tag• EtherType
• IEEE 802.1p
System Element
Fully customized classifiers can be created to match
non-IP-based traffic,as well as to identify IP-based
traffic using non-typical fields in Layers 2, 3,
4, and beyond.
Policy
![Page 84: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/84.jpg)
84
Advanced QoSConfiguration examples - CLI
Single Identification IP Elements - Traffic identification Rules & Classifiers (for Naming rules)
Destination Layer 4 Port – DNS
# qos ip-element 1 protocol 6 dst-port-min 53 dst-port-max 53# qos classifier 1 set-id 1 name DNS_DST element-type IP element-id 1
– IPSEC with UDP Wrapper Destination# qos ip-element 3 protocol 17 dst-port-min 10001 dst-port-max 10001# qos classifier 3 set-id 3 name IPSEC_UDP_DST element-type IP element-id 3
Source Layer 4 Port– SSL
# qos ip-element 2 protocol 6 src-port-min 443 src-port-max 443# qos classifier 2 set-id 2 name SSL_SRC element-type IP element-id 2
Destination IP Address– Specific server
# qos ip-element 11 dst-ip 47.153.226.20/32# qos classifier 11 set-id 11 name HTTP&IP element-type IP element-id 11
![Page 85: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/85.jpg)
85
Advanced QoSConfiguration examples - CLI
Multiple Identification IP Elements - Traffic identification Rules & Classifiers (for Naming rules)
Destination IP Address & Layer 4 Port– Web Traffic to specific server
# qos ip-element 11 dst-ip 47.153.226.20/32 protocol 6 dst-port-min 80 dst-port-max 80# qos classifier 11 set-id 11 name HTTP&IP element-type IP element-id 11
Source IP Address & Layer 4 Port– SSL Traffic from specific server
# qos ip-element 12 src-ip 47.153.226.20/32 protocol 6 src-port-min 443 src-port-max 443# qos classifier 12 set-id 12 name SSL&IP element-type IP element-id 12
Important note on layer 4 port ranges:– Port range specifications are limited due to the way bit masking operates on
the switches. – Example: ‘min’ port range set first then becomes the “bit boundary” for the
‘max’ range. If you start the ‘min’ at port 80 (1010000 binary), the next ‘max’ range can be 81 (1010001), or 83 (1010011), or 87 (1010111), or finally - 95 (1011111). IE: bit mask/wildcards are added by column weight upto the first “1” set in the minimum range value.
![Page 86: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/86.jpg)
86
Advanced QoSConfiguration examples - CLI
Grouping “like” Classifiers and QoS marking per classifier– Destination Layer 4 Port Block
# qos classifier-block 11 block-number 10 name L4_DST set-id 11 in-profile-action 6
# qos classifier-block 12 block-number 10 name L4_DST set-id 12 in-profile-action 4
# qos classifier-block 13 block-number 10 name L4_DST set-id 13 in-profile-action 3
– Destination IP Address and Layer 4 port Block# qos classifier-block 11 block-number 10 name L3&L4_DST set-id 11 in-
profile-action 6# qos classifier-block 12 block-number 10 name L3&L4_DST set-id 12 in-
profile-action 4# qos classifier-block 13 block-number 10 name L3&L4_DST set-id 13 in-
profile-action 3
![Page 87: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/87.jpg)
87
Advanced QoSConfiguration examples - CLI
Applying Classifiers to Interface groups
– InBound Destination IP Address and Layer 4 Port Block# qos policy 10 name IN_L3&L4_DST if-group SGS clfr-type block clfr-name
L3&L4_DST precedence 10
– OutBound Source IP Address and Layer 4 Port Block# qos policy 11 name OUT_L3&L4_SRC if-group SGS clfr-type block clfr-name
L3&L4_SRC precedence 11
![Page 88: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/88.jpg)
88
Advanced QoSAdditional Commands - CLI
Removing Rules - Remove in reverse order
# no qos policy 17# no qos classifier-block 17# no qos classifier 17# no qos ip-element 17
Showing QoS information
# show qos ip-element# show qos classifier# show qos classifier-blocks# show qos policy
![Page 89: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/89.jpg)
89
Advanced QoSQoS Configuration – EDM
EDM ‘QoS Devices’ Screen – Queues, Interface groups / ID’s, 802.1p & DSCP Mapping, Meters and Shapers.
![Page 90: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/90.jpg)
90
Advanced QoSQoS Configuration – EDM
EDM ‘QoS Rules’ Screen – IP, L2 & System Classifier Elements, Classifiers and Classifier Blocks.
Click “Insert” to add a L2 Classifier Element
![Page 91: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/91.jpg)
91
Advanced QoSQoS Configuration – EDM
EDM ‘QoS’ Screen – Actions, Meters, Shapers and Policies.
Pre-defined QoS Actions and service classes
![Page 92: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/92.jpg)
92
Agenda
Getting Started
Management
L2- VLANs
L3 – Routing
QOS
Energy Saver
![Page 93: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/93.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Energy Saver
POE – Access Ports
![Page 94: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/94.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Energy Saver
POE – Access Ports
![Page 95: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/95.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Energy Saver
Energy Saver – Access Ports
![Page 96: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/96.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Energy Saver
Energy Saver – Access Ports
![Page 97: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/97.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Energy Saver
Energy Saver – Access Ports
![Page 98: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/98.jpg)
98
Q & A
![Page 99: Ethernet Routing Switches Stackable Version 2.0.0 Last updated: Mar 2011.](https://reader038.fdocuments.us/reader038/viewer/2022103122/56649c905503460f94949e2d/html5/thumbnails/99.jpg)
Avaya – Proprietary. Use pursuant to your signed agreement or Avaya policy.
Thank you
99