EtherCAT Technology Group Seminar Series...
Transcript of EtherCAT Technology Group Seminar Series...
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20141
EtherCAT Technology GroupSeminar Series 2014
This is the SEW-EURODRIVE product range
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20142
SEW-EURODRIVE is a global company
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20143
Established more than 80 years ago
Sites in 49 countries
79 Assambly plants14 Manufacturing plants
More than 15,000 employees
About € 2.5 billion turnover in 2013/2014
On the Spanish market since 1973 (Maquinaria Eléctrica Bilbao, S.A.)
Since 1993 asSEW EURODRIVE ESPAÑA, S.L
Spanish Headquater in Bilbaoo Local assembly plant o Local service facilityo Local product training
SEW-EURODRIVE is present in SpainOur sites in Spain
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20144
Madrid
Barcelona
Bilbao
Sevilla
Valencia
“Think global, act local”
A Coruña
Logroño
Best practice 1/3: EtherCAT for producing metal parts with complex shapes
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20145
Production step 1/3 “cold rolling”
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20146
coldforming an „endless“ tube
Putting coil on roll-off device
Speed control
1
Production step 1/3 “cold rolling”
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20147
welding the longitudinal seam
Cutting into handy length
High precision speed control
2SEW Application Module
3
Production step 2/3 “hydroforming”
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20148
Production step 3/3 “cutting and fittings”
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/20149
adding the fittings
High quality parts for cars that: Accept vibrations Withstand hot & cold fluids Fit into the remaining space
of the engine bay
SEW-EURODRIVE maximizes process performance
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201410
SEW-EURODRIVE maximizes process performance
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201411
The moving machine bed consists of anSEW synchronous linear motor only.
The SL2 Advanced System comes ready to use, wired and assembled with a housing
Best practice 2/3: EtherCAT for producing plastic parts with complex shapes
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201412
Injection molding with the help of servo drives
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201413
Injection molding with the help of servo drives
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201414
High injection performance
Maximum precision Best energy efficiency
in class
Up to 16 axesHigh precision motion control axes
4+
This is today’s topic
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201415
How your next drive solution will be optimized by EtherCAT
TaskActivity
controlled by Control done byRequired fieldbus
performance
Basic speed control
PLCSpeed control
DriveHigh precision speed control
SEW standalone application module and single axis positioning
Motion control axisEtherCAT Motion Controller
High precision motion control axis
Accomplish many tasks with one solution
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201416
1
2
3
4
MOVIDRIVE® B
4+4+
-1-1
Task
Basic speed control
Speed control
High precision speed control
Motion control axis
High precision motion control axis
Accomplish many tasks with one solution
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201417
1
2
3
4
4+4+
-1-1
Optimal SEW DriveAdequate fieldbus
MOVITRAC® B
MOVIDRIVE® B
MOVIAXIS® A
SEW standalone application module and single axis positioning
20m (65ft) below ground 4 separate entrance/exit garages Drives from SEW, communication
via
Best practice 3/3: EtherCAT for autonomous car parking
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201418
3
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt19 10/13/2014
2
How your next drive solution will be optimized by EtherCAT | BUC-BD E, Reinhardt 10/13/201420
Page Description Source Enquiry date
6 engine cradle
roll bar
part of a car body
chassis side memberexhaust system
http://www.schulergroup.com/technologien/produkte/grundlagen_innenhochdruckumformung_bauteile_fahrwerk/index.htmlhttp://www.schulergroup.com/technologien/produkte/grundlagen_innenhochdruckumformung_bauteile_design/index.htmlhttp://www.schulergroup.com/technologien/produkte/grundlagen_innenhochdruckumformung_verfahren_rohre/Bauteile/hydroforming_ihu_verfahren_ihu_rohre_bauteil_laengstraeger.jpghttp://img.docstoccdn.com/thumb/orig/159688575.pnghttp://www.schulergroup.com/INTERNET/major/pool/technologien/produkte/grundlagen_innenhochdruckumformung_bauteile_abgas/hydroforming_ihu_bauteilspektrum_realisierte_bauteile_automotive_bauteil_abgassysteme.jpg
26.09.2013
7 cold rolling picture http://www.ndt.net/article/dgzfp2008/Inhalt/di4b2.pdf 12.09.2013
8 longitudinal seam welding http://de.academic.ru/pictures/dewiki/84/TRUMPF_08_Laserschweissen-Welding.jpg 12.09.2013
9 tubeshydroforming video
http://www.designforlasermanufacture.com/assets/395px_Tube_Welding2.jpgSchuler AG
26.09.20132012
10 hydroformed part Schuler AG 2012
11 hydroformed part Schuler AG 2012
12 control cabinet Schuler AG 2012
13 granulate materialconnectorinjection molding partscake tinmulti color part
http://fs02.androidpit.info/ass/x74/11288474-1378666580439.jpghttp://www.engelglobal.com/engel_web/global/de/media/ENGEL_teletronics_Steckergehaeuse.jpghttp://www.vdi-wissensforum.de/uploads/media/03TA110012_Spritgziessen-2012_Engel_300dpi.jpghttp://www.fks-kunststoff.de/silikon_spritzguss.phphttp://upload.wikimedia.org/wikipedia/commons/e/e2/Zahbiaschdlgrif_in_Meakomponentntechnik.jpg
26.09.2013
14 injection moldin g process http://upload.wikimedia.org/wikipedia/commons/thumb/2/23/Principe_moulage_injection_polymere.svg/1000px-Principe_moulage_injection_polymere.svg.png
12.09.2013
15 E-DUO 700 video ENGEL AUSTRIA GmbH 2013
19 autonomous car parking 1autonomous car parking 2
http://www.woehr.de/system/html/The-Cube-car-park-5befb697.jpghttp://www.woehr.de/system/html/The-Cube-79015e8b.jpg
12.09.2013