ETERNITY PLCC SWITCHThe Special Digital EPAX for PLCC Applications

Electricity infrastructure is the lifeline of every modern community, state and country.

Instant, live-wire communication is vital for the people who run

and maintain electricity generation, transmission and

distribution. They demand a communication system that is

reliable, intelligent and flexible. Due to the special nature of their

PLCC communication network and application, they need a

special product that is designed keeping their infrastructure

and requirements in mind.

Introducing: Matrix Eternity – The Special Digital PLCC EPAX for

electricity utilities!

The PLCC network itself is typical in its architecture and topology. In addition, PLCC users depend heavily on communication to keep the electricity infrastructure run uninterrupted round-the-clock. Matrix Eternity is the result of thorough study of PLCC requirements and many years of experience in designing similar products.

Flexibility is the core strength of the Matrix Eternity. Its open, universal slot architecture allows it to be upgraded at any time to adapt to the growth and changes in the PLCC network. Various combinations of cards make it possible to configure Matrix Eternity to match the exact need of a site

Built on PCM-TDM technology with high density digital switching platform, Eternity provides 100% non-blocking system to perform efficiently in heavy traffic environment. Each interface port has its own dedicated DTMF encoders and decoders to support simultaneous dialing and receiving calls on all the ports. This makes Eternity a truly non-blocking switch.

# Matrix Eternity provides 4 built-in ports for digital key phones and operator consoles. Multi-party Conferencing Bridge and 256 seconds (16 messages x 16 seconds) Auto Attendant are part of the standard product. Analog Input Port for external music, Analog Output Port for PAS, Digital Input Port for connecting sensors and Digital Output Port for relay control

# are built-in system. In addition, a Printer Port , COM Port, an Ethernet Port and a USB Port make the Matrix Eternity an all

integrated PLCC Switch.

The Matrix Eternity is designed for industrial applications requiring high reliability. Distributed processing, universal slots architecture, hot-swapping of cards and system log of faults enhance the reliability of the product.

Matrix Eternity supports many different types of interfaces on the trunk and the subscriber sides and hence can be connected with diverse networks. It supports Plain Old Telephony System (POTS), FXS, FXO, E&M, GSM, ISDN BRI, ISDN PRI, T1, E1 and VoIP. Analog phones or digital key phones (DKP) can be used by the subscribers.

Flexible

Non- Blocking PCM-TDM Technology

Integrated

Reliable

Versatile

Eternity GE6S

Eternity ME10S

Matrix Eternity PLCC Switch is available in three variants:

Eternity GE6S- 6 Universal slots- Expandable up to 96 Ports

Eternity ME10S- 10 Universal slots- Expandable up to 324 Ports

Eternity ME16S16 Universal slots

- Expandable up to 516 Ports-

*32 Bit RISC Architecture Primary Protection

*Compact and Sturdy Design Rack (Cabinet) with Integrated MDF

#*Redundancy

Secondary Protection

SLIC based Design

Dedicated DTMF

SMT

#Distributed Processing Standard 19” Sub Rack

Universal Slots

High Density Digital Switching

*Hot-Swap

Web Based System Management

Multi Network Operation

The Eternity employs a high speed 32-bit RISC process with With the rack enclosure, the Eternity can be supplied with 32MB SDRAM and 32MB Flash Memory. This Master processor primary protection, using IPM (Inter Protection Module) that provides the Eternity enough horse-power to provide real-time consists of resetable fuses and GD Tubes to be mounted on response to all the incoming and outgoing calls. MDF.

Eternity's compact design leads to smaller foot-print. The wall The Eternity can be supplied in a custom-made steel rack mountable design is easy to maintain and occupies lesser enclosure designed to accommodate all the internal wiring, space. Besides, all the parts have been fixed in specified slots. MDF and protection providing a neat, protected and reliable This 'no moving parts' design leads to higher reliability. installation. Industry standard Krone-type MDF tag blocks are

provided to terminate System side wiring and Field side wiring.

The Eternity ME10S offers redundancy for its all critical functional cards like Master Card, Switch Card and the 48VDC Power Supply Card. On the failure event of Power Card and Switch Card, the stand-by card takes over without interruption of their functionalities. Whereas, if the active Master Card fails, the system restarts and stand-by card takes over automatically.

The Eternity provides built-in secondary protection circuit on each interface ports as per relevant standards at no extra cost.

Each Station (Extension) Port uses DSP based Subscriber Loop Integrated Circuit (SLIC), which offers programmable line parameters.

Matrix Eternity offers dedicated DTMF circuit for each user making it 100% non-blocking even while dialing. This is a The surface Mount Technology is the current semiconductor critical parameter for organizations expecting heavy call traffic. packaging technology that offers reduction in real estate This is what makes Matrix Eternity a 100% non-blocking resulting in smaller foot-print and higher density of ports. SMT system in the true sense. also ensures reliable performance from EMI-EMC viewpoint

Matrix Eternity employs multiprocessor architecture, wherein The Eternity ME10S is housed in the industry 19” rugged, each card has its own dedicated micro-controller, EPROM and powder-coated aluminum sub-rack (System Enclosure) and RAM. This local (Slave) processor is responsible for local thus can be mounted in a rack with other data and networking processing of events and commands. The master processor telecom equipmentmanages all the slaves. This technology enhances flexibility and reliability.

All the expansion slots of Matrix Eternity are universal in nature. Any card can be inserted in any slot and the system will

Built on PCM TDM digital technology, the Eternity ME10 and configure it automatically. This scheme eliminates Eternity ME16S, uses 1024x1024 switching matrix to provide configuration bottle-necks because any slot can be used for unrestricted communication to all the users simultaneously. SLT, DKP, Analog Trunk, ISDN BRI, ISDN PRI, GSM, VoIP,

Magneto or any other circuit. Thus, allowing flexible configuration.

In a high-reliability scenario, the Eternity cards can be ordered with hot-swap circuitry. This allows replacing cards without switching off the system and in the process disconnecting all Flexible and user-friendly windows based GUI software, Jeeves the ongoing calls. helps in programming the features through a web browser like

the Internet Explorer. Matrix Eternity incorporates built-in server functionality that is required to access Eternity to

In addition to E&M ports, the Eternity also supports 2Wire program it through the internet. This web based programming Trunk (CO Trunks), GSM, ISDN BRI/PRI, E1/T1 and VoIP network feature helps users to configure Eternity from any part of the operation simultaneously using respective interface cards. This world once it is connected with the IP networkallows the Eternity to be used as a common switch for PLCC, PSTN, ISDN, GSM and the Internet telephony.

TECHNOLOGY

INTERFACES

TRUNK (NETWORK) INTERFACES

Built-in circuit and logic to generate ringing voltages, allows Magneto phones to be connected directly to the Eternity. It can Being Eternity as a universal platform for integration of detect incoming call ring and route the call to any digital or multiple interfaces, it allows terminating 2W Analog Trunk (CO analog station. The station can just lift the handset and talk to Lines) to work Eternity as PLCC EPAX as well as conventional the calling magneto phone. Similarly, a user can “crank” PBX simultaneously. outgoing calls on a magneto line.

Matrix Eternity E&M card provides the interface to PLCC panel. The Eternity offers connectivity based on E1/T1 standards. Both E&M Dial-in /Tie line as well E&M Express lines can be Using DS1 card, Multiple Eternity can be connected over interfaced. Eternity supports E&M line with 2W / 4W and Type various media like Copper, Fiber, RF and VSAT. This card allows IV / V. Using E&M interface, Eternity can be deployed in typical interfacing of Eternity EPAX to Radio Link, STM, xDSL Modem, power grid network to integrate with routers, VSAT, DACS / DACS / Multiplexers etc…Multiplexers, etc.

VoIP Network can be connected to Matrix Eternity through an Matrix Eternity supports GSM connectivity by means of an optional VoIP card. Each VoIP card provides 8 Channels, optional GSM card. User can dial out mobile number grabing enables users to call on all 8 channels simultaneously. Eternity GSM (SIM) line to avail call cost benefit by calling GSM to GSM. is designed to support a maximum of 32 SIP accounts of various ITSPs.

Eternity can connect ISDN BRI (2B+D) as well as ISDN PRI (23B+D or 30B+D) lines to the system using optional cards. ISDN BRI and ISDN PRI lines can be configured as NT or TE as per application requirement. An ISDN Terminal, Video Phone or LAN can be connected to ISDN port if it is programmed as NT.

Magneto Trunk

2Wire Trunks (FXO / CO Lines)

E&M TrunkT1/E1 Trunk

VoIP Channel (SIP)GSM Trunk (SIM)

ISDN Trunk

TWT/ T1/E1

GSM

E&M

E&M

VolP IP

RS 232C

USB

1.: ? 2abc 3def

4ghi 5jkl 6mno

7pqrs 8tuv 9wxyz

#0

Magneto

DOP

DIP

AOP

AIP

Sensor

Public Announcement System

Relay Based Device

External Music

PSTN

PLCC

GSM

Auxiliary Interfaces

Extension Interfaces Trunk Interfaces

ISDN PRI (NT)

ISDN BRI (NT)

DKP

ISDN

Phone

Analog

Phone

Digital

Phone

Video Conference

VSAT Network

SLT

SLT

FAX

EXTENSION (STATION) INTERFACES AUXILIARY INTERFACES

Eternity provides FXS port used for interfacing standard The external music port allows an external music source to be Analog (2wire) Telephone instruments. System can be connected to Matrix Eternity. The desired music or jingle can be programmed using any analog telephone connected to FXS played while a person is kept on hold.port of Eternity

The Public Address System Port allows any station user to make Developed on proprietary protocol, Matrix Eternity offers public announcements on external speakers.Digital Extension port to connect Digital Key Telephone through a 2Wire full duplex Digital Subscriber Network Interface Circuit. EPAX can be programmed using Matrix Eternity provides a solid state digital out-put port for Eon45 or Eon42 Digital Key Phones connected on DKP port of connecting relay based devices for various controlling system. applications.

Eternity provides ISDN BRI (2B+D) ports using optional ISDN Matrix Eternity allows you to connect any type of sensors to its BRI card. This card ports can be configured as NT to use as an digital input port (DIP). In case of emergency, the Eternity dials ISDN PRI extension. Once configured as ISDN extension, any 3 different pre-defined numbers and plays a pre-recorded ISDN terminal (TE) device like ISDN Phone can be connected to message. A hooter can also be activated in case of emergency.it.

Eternity provides ISDN PRI (30B+D/23B+D) ports using optional DS1 card. This card port can be configured as NT to use as an ISDN PRI extension. Once configured as ISDN extension, it can be used for Voice and Data communication like Video Conferencing using appropriate ISDN terminal (TE) devices.

Analog Extension (FXS) External Music Port (AIP)

Public Address System Port (PAS) (AOP)Digital Extension (DKP)

Relay Port (DOP)

ISDN BRI Extension (NT Mode) Security Dialer Port (DIP)

ISDN PRI Extension (NT Mode)

Alternate Routing

Compander Control Signal (CCS)

Destination Restricted Dialing

Disable Out-of-Order Trunk

In typical PLCC network, there can be multiple paths that a call can take to reach the destination. The Eternity has the facility of selecting an alternate route if a particular route is busy

To improve signal to noise ratio in a PLCC network, speech signals are compressed at source and decompressed at the destination. This process is activated by the Compander Control Signal (CCS). CCS can be activated in the Eternity at originating and destination stations. CCS can also be activated for transit calls. CCS signal is provided for each E&M port.

This features restricts the all users of the system to make a call to certain destination even though trunk line is available to that destination. This feature blocks all the calls initiated by all users to specific destination.

In the event of faulty trunk line, Eternity allows user to disable the trunk and take it out of service to avoid routing of calls on such trunk lines.

PLCC FEATURES

132KVS/s21

SID 330033

PLCCModem

220KVS/s 6677

SID 4300

PLCCModem

220KVS/s201

SID 31

PLCCModem

132KVS/s

PLCCModem

SID 2233

51

220 KV S/s

PLCCModem

SID 301

22522

440KV S/s1212

SID 41SID 201

PLCC Calling Features & Numbering Plan

Tie Line Call

Call Barring

Call Barring

Transit Call

Alternate Route

Field Programmable Remote Programming

Flexible Extension Numbering Plan

Routing Table

Flexible Station IDSMDR Reports (Outgoing, Incoming and Internal)

Multiple Station ID

System Activity Log & Report

Priority (Forced Call Disconnection)

System Fault AlarmsProgrammable Pulse

Programming OptionsSystem Fault Log

The hardware and software configuration can be changed in Matrix Eternity can be engineered for change in its the field to adapt to the dynamic field requirement. Capacity, programming from a remote location also. This does not even Port configuration and programming can be managed at the require a PC or any other specialized device at the site. EPAX installation site. No specific tool is required while expanding can be programmed remotely once it is connected with CO the configuration on field. lines or with internet. Remote user can admin the system by

Web based Management or by using Telephone, which saves time and cost in providing essential technical support.

The Eternity offers flexible numbering plan for all the stations users. These can vary from 1 to 4 digits. It is also possible to

Each call in a PLCC network is routed to its correct destination program few ports with 2 digits and others with 3 or 4 digits. through programming of routing table. The Eternity allows the Even overlapping numbers is also possible.user to define 255 different routes in its routing table.

In a PLCC network, each EPAX is given a Station Identity (SID). The Advanced Search Module allows detailed reports for each SID is used to route a call to its correct destination. Eternity outgoing, incoming and internal calls, to be generated and allows setting of SID to any length from 1 to 6 digits. This printed for better analysis. Filters for selecting what calls to be allows seamless integration of the Eternity in any existing PLCC stored and filters for different types of analysis are available in network.Matrix Eternity. Separate buffer capacity of calls is available each for 6000 outgoing, 5000 incoming and 1000 internal

The same Eternity can be programmed with multiple Station ID calls.(SID). This provides flexibility of connecting the Eternity with Multiple PLCC networks.

The Eternity records important events and exceptions within the system in its internal log file. Events like System restart, In a PLCC network it is desired that calls from selected user have Card going faulty, Port getting hang, etc. are noted in this log. precedence over other user. Such important user may be In turn, this log can be printed or transferred on a PC for further allowed to interrupt an ongoing call to request them for review and archiving. System Activity Log can be printed in release of current call. The Eternity offers priority to such users. online mode by connecting a parallel or a serial printer on the There are 10 different levels or priority to cover entire hierarchy respective ports.of any organization.

Failure of card or such problems can be annunciated on the Eternity provides users a flexibility program the Engage Pulse, relay port provided on the Master (CPU) card of the Eternity. Released Pulse, Ringer Pulse and Dialed Digit Pulse to match Hooter or Lamp can be connected using an appropriate with the pulses of PLCC network wherein it is getting installed. external relay to draw attentions of the operator or the

engineer so that corrective actions can be taken.

Eternity provides multiple options to user for programming the Eternity functions like a watch dog, whereby it maintains a log system. EPAX can be programmed using normal analog of all faults occurring in system. Various faulty events like Card telephone, digital key phone or using web based GUI tool from Absent, RTC Failure, DS1 Signal Loss, BRI Signal Loss, and PC. DKP/SLT absent etc. are registered in the fault log. On such

Integrations of Eternity in PLCC and Optical Fibre Network

E&M

E&MDACS/MuxE1

E1

E1

E1

E1

E1

E1

E&M

E&M

E&M

E&M

400KV S/s

400KV S/s

132KV S/s

132KV S/s

220KV S/s

GE6SGE6S

GE6S

GE6S

GE6S

GE6S

ME10S

ME10SxDSL xDSL

E1 SDHRingN/w

E1

E1

E1 E1

STM

STM STM

STM

E&M - Call BarringE&M - Transit CallE&M - Transit CallE1 on OFC MediaE1 on Copper Media

PLCCN/w

events Eternity activates the buzzer.

Matrix Eternity offers CLI features on both DKP and SLT. It A caller has many options in selecting a route while calling the offers the facility to detect CLI on normal telephone lines, desired destination in a PLCC network. If the designated route is ISDN lines, GSM lines and VoIP lines. It can detect both, busy, call may be routed through an alternate route or a system, DTMF and FSK signals for CLI. You can get CLI of external which is meant for other locations. Eternity can block transition number, internal number and also CLI on transfer of calls. If of such unauthorized routing of calls. This streamlines the flow of programmed, even the name of the caller can be displayed the traffic only on the designated routes.on the DKP. Matrix Eternity also offers the flexibility of

programming the CLI feature for each extension Eternity gives flexibility to group the trunks to avoid traffic on individually.critical trunk/routes. Feature allows certain trunks to keep reserved for specific call traffic so that ordinary traffic does not

This unique feature allows participants of a conference to flow through such trunks/routes. It helps user to balance the dial in to a live conference at a scheduled time. Using the traffic evenly on all trunks.Dial-in feature, the users can directly enter the conference by entering their passwords.

User restricted dialing feature blocks a call originated from specific user for specific destination. When user tries to call

Matrix Eternity possesses a PCM Conference Call Circuit that specific destination system rejects the call, allowing other user to uses a total of 8 digital conferencing circuits. Eternity ME call same destination. supports of a maximum of 21 parties while Eternity GE supports of a maximum of 15 party in a single conference without affecting the speech levels. This feature allows even This feature can be used to restrict the long distance and multiple conferences to be conducted simultaneously. Dial-international calls made by the user while allowing them to dial in Conference is also possible. few numbers of the same category from the allowed list. It uses

number specific criteria for allowing or denying the call. System supports such 32 lists in both allowed and denied types. Each list

This function is of great use for those stations which make supports a maximum of 256 numbers of 16 digits each.more trunk calls than internal calls. As soon as the station user picks up the receiver, he/she gets access to the desired trunk line, saving time and effort. This function also offers a The built-in auto-attendant feature performs the task of an variant whereby a specified telephone number may be operator by greeting the external caller and transferring call to dialed either immediately after the handset is picked up or the desired station. Eternity can greet the five calls after a pre-defined delay.simultaneously.

It is a unique function designed using structured The system can be programmed to have different ring cadences programming. It selects the most cost effective trunk from to the user depending on the call origination. Eight types of the allotted trunks to make outgoing calls depending upon ringing cadences can be set for different call types like internal the time of call and the destination number leading to calls, calls from boss, alarms, auto redial etc. This feature is set to major savings. Four options are available for least cost alert the users about the type of call they are receiving.routing, based on (1) Time, (2) Number, (3) Combination of Time and Number (4) Service Provider to Service Provider. Even combinations of the above parameters can be defined Matrix Eternity offers interface for most types of call Accounting for least cost routingSystem protocols available world-wide. This helps in easy

integration of the third party call accounting software with Matrix Eternity.

Messages can be announced to a larger number of people just by lifting the phone and dialing a specific code. Mass communication at its best! An effective cost control feature that allows you to have user

specific call duration control with multiple options for each type of calls. Feature includes incoming, outgoing, intercom, long distance or international call to be disconnected after a pre- Matrix Eternity supports Voice Mail System through an defined duration optional VMS card. A voice mail system that provides

efficient call management and accurate messaging can work wonders for your organizations productivity, by saving

Eternity provides Call Progress Tones like Dial Tone, Ring Back precious time of employees, yet allowing a non-interfering Tone, Busy Tone etc. Country specific tones can be selected to work environment. Key features like Message Wait match the tones of the country wherein it is getting installed. Indication, Call Taping, Conversation Recording, Live Call Similarly, ring cadences can also be selected. Screening etc are supported by the VMS card

Matrix Eternity has built-in voice modules. They can be used for various voice applications like Station Greetings, Reminders, Toll Control, Multiple Trunk Auto Attendant,

Caller Line Identification (CLI)Transit Barring

Trunk Restricted Dialing

Conference (Dial-in)

User Restricted Dialing

Conference (Multi Party)

Allowed / Denied List

How Outward Dialing

Auto Attendant Functionality

LCRBoss Ring

Call Accounting System Interface

Paging

Call Duration Control

*Voice Mail System

Call Progress Tones & Rings

Voice Message Applications

#* Optional Model Dependant

T The Matrix Eternity PLCC Express is the superset of all the connecting important locations. Each node is connected with switching functions. It has capabilities to work as a PLCC EPAX all other nodes using direct links in a mesh network topology. with transit functions. It also performs the role of a normal This eliminates delays in routing a call due to intermediate office PBX. Hence in the cases where a customer does not wish transit switching and dialing. As a dedicated link is reserved to invest in separate switching infrastructure of PLCC Express, between two nodes, the route is never busy. This provides PLCC EPAX and PBX, the Eternity can be configured to handle instantaneous connectivity between all the important all these functions.locations like head offices, load dispatch centers (LDC), control rooms, generation plants, and major sub-stations

The digital key-phones use just a single-pair of wires to (400KV/220KV). These lines are known as Express Lines or transport speech, data and power eliminating bulky and Hotlines.unreliable wiring. The modular, centralized and software driven architecture of the Eternity provide dependable Traditionally, each of these express lines is terminated on a platform for PLCC Express applications. Moreover, redundancy separate phone or a console of 4 to 8 lines. Switching between of critical hardware blocks are provided to meet needs of lines is achieved using obsolete relay panels. Moreover, all the mission-critical applications.cables are taken right up to the desks of senior officers and

mangers in their offices and control rooms. There is way of easy identifying each line. Call cannot be transferred easily and conferencing between multiple locations cannot be If need be, the Eternity can be configured to provide express conducted. In short, many of the existing solutions are lines access to normal subscribers using analog phones. For unwieldy and unreliable. making an outgoing call, these users need to dial just the trunk

port number and call would be placed on the other end of the Matrix Eternity offers a special additional software module to express line. Incoming calls from the express lines can be transform it as an efficient Express Switch. Once this module is routed or transferred to these phones. If the phone have CLIP activated, the express lines can be terminated on the Matrix feature, they can see the port number and even the name of Eternity. Digital key phones with Direct Station Selection (DSS) the remote location calling.keys can be used by subscribers to make and receive calls at just a touch of a button.

Call Transfer, Call Toggle between two calls and Multi-Party Conference are just few of the many value added features possible. These functions help reduce time taken to arrive at an important decision and contribute to the quality of the decision. These features can be programmed on the DSS keys The system indicates the status of call being received or made, and hence are easy to use. station busy etc. on a convenient LCD screen of DKP and dual

colour LEDs on the DSS 64. Most importantly, any number of express lines can be connected and accessed through a single DKP.

Making and receiving calls from the key-phone is intuitive and easy. Its LCD displays the name of the called or calling location. DSS keys allow single touch access to all the locations. Dual color LED is provided for each location showing elaborate status of the line. Talking is possible through the handset or the built-in speaker-phone. The status of all the ports is visible to all the users.

As the digital key-phones use just a single pair of wires for speech, data and power, it is easy to extend them to offices and residences of concerned authorities living next to the site. Thus these important people can attend to emergencies even during night hours and holidays.

Ringer and speech volume can be adjusted by the user to suit his tastes. Ring tune and cadence can also be programmed to differentiate between different phones ringing simultaneously. In fact, different key-phones can have different keys assigned for different locations. This allows dividing the total traffic between two key-phones. Flexible hunting groups with simultaneous and round-robin rings provide flexibility of placing a call in a desired sequence.

many PLCC networks use point-point lines for inter-

Reliability

Universal Access

Value Added Features

Eternity as a PLCC Express Switch offers the following distinct advantages:

Ease of Use

Extended Coverage

Flexibility

Integrated Switch

Integration of Eternity in PLCC Express Line Network

ETERNITY PLCC EXPRESS SWITCH

Generation Plant

E&MExp

PLCCModem

220 KV S/s

PLCCModem

E&MExp

SLDC

PLCCModem

E&MExp

LDC

PLCCModem

E&MExp

440KV S/s

E&MExp

ALDC

PLCCModem

E&MExp

CE EE

ControlRoom

E&M - Express Lines

Adjustable Ringer Volume and Speech Level

DSS Keys

Executive and Operator Functionality

Last Dialed Calls

Message Paging

Missed Calls

Tri Colour LEDs for Port Status

User has the option of adjusting the ringer volume level as per the requirement. The added advantage is that both receive and transmit speech levels can also be adjusted by the user.

The Eon offers 24 soft keys that can be programmed for each user, to access trunk line, SLT, DKP and even features, at a single touch of the key.

The Eon provides user functionality of Operator or Executive by means of dedicated keys to perform specific task by single touch of buttons. Its 24 programmable keys can be customized as to work as per user's requirement.

Last dialed 16 calls can be stored.

User of the Eon42 can page different pre-defined messages, like Meet Me, Congratulations, Meeting Today, etc., to other DKP users. These messages can be programmed by the system engineer.

Details of last 5 missed calls can be viewed on the LCD of the Eon42. A useful feature for the user to find details of calls he missed.

Status of other extensions (DKP and SLT) and trunk lines can be displayed on the Digital Key Phone. The status of the user's extension as well as that of other extensions or trunks can be known through the LEDs.

Eon42P6 Lines x 24 Characters Backlit LCD Display

Eon42S2 Lines x 24 Characters Backlit LCD Display

DSS72

‘Eon’, the Digital Key Phone, is a versatile, feature-rich, easy to use station. It supports a host of additional features providing the user fast access to the functions of Matrix Eternity at a single touch of a button. Matrix Digital Key Phone (DKP) is available in two models - Eon42S and Eon42P. All models are available in two colour variants - Black and White.

DIGITAL KEY TELEPHONES AND DSS CONSOLES

KEY FEATURES IN EON42

Standard Features available in Eon42S and Eon42P

! Absent/Present Settings! Adjustable Ringer Volume Level! Adjustable Speech Level! Auto Answer! Background Music (BGM)! Call Chaining! Call Cost Display! Call Duration Display! Dialed Number Directory! Directory Dialing by Name! Forced Answer! Hands Free Operation! Key Pad Lock! Last Dialed Calls! Live Call Screening! Menu based Settings! Message Paging! Missed Calls List! Multiple Ringer Tones ! Mute! Off-hook Alert! Personal Settings! Quick Dial! Room Monitor! Text Message Reply! Time Zone Display! Tri Colour LEDs for Port Status

Additional Features available in EonSoft

Forced Answer

Help Menu

Integration with Microsoft Address Book

Shortcut Keys

Tools Tips on Mouse Over

!

! Automatic Sensing of Software Status! Executive Mode (with 20 DSS Keys)! Handset Connectivity! Help Menu! Integration with Microsoft Address Book! Key Board Macros! Key Board and Mouse Operation! Programmable Tool Tips! Shortcut Keys! Standard Windows User Interface! Tool Tips on Mouse Over

This feature enables the caller to force the called party (on Eon42 or EonSoft) to answer the call by making the destination station's speaker go Off-Hook. This is useful when the called party is not responding to the call in spite of the station ringing continuously.

The EonSoft offers a user friendly help menu for ease of operation.

The EonSoft can be integrated with Microsoft address book. This helps the users to directly call the numbers stored in theaddress book at a click of the mouse. The EonSoft accepts both keyboard and mouse inputs.

Shortcut keys can be defined for different functions so that they can be used easily.

Tool tips shall be displayed on mouse over. These tips can be programmed for each key. It can help the user to know details about a particular key. It is also useful in intuitive operation of the EonSoft.

Automatic Sensing of PC Status

EonSoft

An innovation from Matrix, the EonSoft offers integration of your PC with your DKP/SLT. A feature of great utility to those techno savvy people who have computer on their desks and do not wish to keep a separate telephone.

EONSOFT

! 12 kHz/16 kHz Metering ! Hotel-Motel Features! Abbreviated Dialing (Global & Personal) ! Incoming Call Management! Abbreviated Dialing (Free) ! Internal Call! Access Codes (Programmable) ! Internal Call Restriction! Account Codes ! Interrupt Request! Account Codes (Forced) ! ISDN-BRI Connectivity! Alarms (Time, Daily, Future Date & Time) ! ISDN-PRI Connectivity! Alarm-Snooze ! Last Caller Recall! Alarm-Multiple ! Last Number Redial! Allowed and Denied Lists ! Least Cost Routing ! Alternate Number Dialing (Number, Time, Combination, Carrier Pre-Selection and Service Provider to Service ! Analog Input Port Provider)! Analog Output Port ! Live Call Screening! Auto Attendant (Multiple Languages) ! Live Call Supervision! Auto Call Back (Busy, No Reply) ! Master Time Zone! Auto Redial ! Maturity (12 kHz/16 kHz, Delay, CPD, Polarity Reversal, Connect)! Automated Control Applications ! Meet Me Paging! Background Music (DKP, SLT) ! Message Wait! Barge-In ! Mobile Ports! Behind the PBX Applications ! Music on Hold! Boss Ring ! Name Programming (Station, Trunk)! Call Accounting System (CAS) Interface ! Networking Mode! Call Budget ! Operator (Single, Multiple)! Call Cost Calculation ! Override! Call Duration Control ! Paging (Internal and External)! Call Follow Me ! PLCC Applications! Call Forward (Busy, No Reply, Dual Ring,Busy or No Reply, To external number) ! PMS Interface! Call Forward (Remote) ! Printer Port! Call Park (General and Personal Orbit) ! Priority (Intercom and Trunk)! Call Pick Up (Group and Selective) ! Privacy! Call Progress Tones ! Programmable Access Codes! Call Splitting ! Programmable Call progress tones and rings! Call Taping ! Programming the System (Using SLT, DKP, Ethernet Port, Serial Port, Jeeves)! Call Transfer (Screened, On Busy, While Ringing, Trunk to Trunk) ! Public Address System Port! Calling Line Identification and Presentation (CLIP) ! Quick Dial! Calling Line Identity Restriction (CLIR) ! Raid! Calling Line Identification-Station (DKP and SLT) ! Real Time Clock! Calling Line Identification-Trunk (Analog, ISDN, T1/E1) ! Real Time Clock Synchronization! Central Ringer ! Region Code! Class of Service (CoS) ! Remote Alarm! Closed User Group ! Remote Call Forward! CLI based Routing ! Remote Programming! Closed User Group (With/Without Exchange ID) ! RS232C Ports! Communication Ports ! Security Dialing and Reporting! Conference-3 Party ! Selective Trunk Access! Conference-21 Party ! Self Ring Test! Conference Dial-in ! Station Groups! Conference-Multiple ! Station In-Service/Out-Service! Conflict Dialing ! Station Message Detail Recording (SMDR)! Continued Dialing ! Station Message Detail Recording (Incoming, Outgoing, Internal)! Conversation Recording ! System Activity Log and Display! Customer Emergency Services Identification Dialing ! System Administrator (SA) Mode! Customer Name ! System Debug! Date and Time Format ! System Fault Log and Display! Daylight Saving Time ! System Security (Passwords)! Department Call ! Time Tables! Digital Input Port ! Toll Control! Digital Output Port ! Trunk Access Groups! Direct Inward Dialing (DID) ! Trunk Auto Answer! Direct Inward System Access (DISA) ! Trunk Connectivity (TWTI)! Direct Outward System Access (DOSA) ! Trunk Connectivity (BRI)! Distinctive Rings ! Trunk Connectivity (E&M)! Do Not Disturb (DND) ! Trunk Connectivity (E1)! Do Not Disturb (Remote) ! Trunk Connectivity (GSM)! Dynamic Lock (Auto and Manual) ! Trunk Connectivity (PRI)! E&M Connectivity ! Trunk Connectivity (T1)! Emergency Call Detection and Reporting ! Trunk Connectivity (VoIP)! Emergency Dialing ! Trunk Landing Groups! External Call ! Trunk Parameters! External Music Port ! Trunk Reservation! Field programmable ! Upgrading the Software! Flash Timer ! User Security (Password)! Flexible Clock Synchronisation ! Video Conferencing! Flexible Numbers ! Virtual Stations! Forced Call Disconnection ! Voice Help! GPAX Applications ! Voice Mail Integration! Helpdesk ! Voice Message Applications! Hold ! Voice Prompts for Tones! Hot Desking ! Walk-in Class of Service! Hotline (Immediate and With Delay) ! Web Based Programming! Hot Outward Dialing (With/Without Number, With/Without Delay)

FEATURE LIST

FXO (CO Lines) Port Terminal (TE)Off Hook Line Impedance : 600Ù Signaling : Euro ISDN ETSI DSS1 Loop Limit : 1500Ù CTR4 (NET5), ITU-T Pulse Dialing : 10PPS +/- 5%, Q.921, Q.931, US Make/Break = 33:67 National ISDN-2, DTMF Dialing and Reception : As per ITU-T Q.23 & German 1TR6, France Q.24 VNx, Australian TS- CLI Reception : DTMF, FSK ITU-T V.23 014, TS-038and FSK Bellcore 212 Supplementary Services* : Euro ISDN, US Nation Call Maturity : Delay, Polarity ISDNReversal, 12 kHz or 16 kHz SPM Protection : Solid State built-in Protection : Solid State (over Secondary Protection

Voltage and Over E1 CASCurrent) built-in Bit Rate : 2048 kbps +/- 50 Secondary Protection

ppmConnections : Amphenol 36-Way Line Coding : HDB3Connector Signaling : ITU-T Q.400, Q.421,

FXS (Stations Lines) Port Q.422, Q.424, Q.440-Loop Limit : 1200 Ù Max Q.442, Q.450, Q.457-

(Excluding Telephone) 458, Q.466 and Q.471-Q-476 and

Loop Current : 39 mA (Max.) MFC-R2Ring Voltage : 60 Vrms@25 Hz Alarms : 1.431, G.732, ETSI Off Hook Line Impedance : 600Ù 300-233Pulse Detection : 10 PPS +/- 5%, Connection : RJ45 (120 Ù) Make/Break = 33:67 Country Variants* : Argentina, Bahrain, DTMF Detection : As per ITU-T Q.24 Bolivia, Brazil, Chile, CLI Presentation : DTMF, FSK ITU-T V.23 China, Columbia, and FSK Bellcore 212 Czech Republic, Protection : Solid State built-in Honduras, India,

Secondary Protection Indonesia, Korea, Connections : Amphenol 36-way Malaysia, Panama,

connector Singapore, ThailandProtection : Solid State built-in

Secondary ProtectionDigital Key Phone (DKP) PortInterfaces : Single Pair for Speech, Signaling and Power T1 RBS Channels : 2B+D Bit Rate : 1544 kbpsSignaling : Proprietary Protocol Line Coding : AMI and B8ZSLoop Limit : 150Ù (Eon 45), Signaling : Using ABCD Signaling

100 Ù (Eon 42) includes EIA-464 B/ Protection : Solid State built-in E&M, Wink Start,

Secondary Protection FXS Ground Start, FXS Loop Start, FXO, DTMF, MF-R1BRI Trunks

Alarms : ANSI T1.231Channels : 23B+D and 30B+DPerformance : ANSI T1.403, ANSI Personality : Network (NT)* and

T1.231, AT&T Terminal (TE) TR54016Signaling : Euro ISDN ETSI DSS1

Connection : RJ45 (100 Ù)CTR3 (NET3), ITU-T Protection : Solid State built-in Q.921, Q.931, US

Secondary Protection National ISDN-1, German 1TR6, France VNx, Australian TS- GSM Trunks013, TS-031 GSM Band : Quad-band,GSM850,

Supplementary Services* : Euro ISDN, US Nation EGSM850, ISDN DCS1800,PCS1900

Protection : Solid State built-in Compliant : ETSI GSM Phase2/2+ Secondary Protection SIM Card : One per GSM Port

SIM Interface : 1.8V, 3VTransmission Power : Class 4 (2W) at PRI Trunks

GSM850 MHz and Channels : 23B+D and 30B+D EGSM900 MHz BandPersonality : Network (NT)* and

TECHNICAL SPECIFICATIONS

Power SupplyClass 1 (1W) at Option 1 : Mains 90-265 V AC, DCS1800 MHz and

47-63 Hz PCS1900 MHz BandOption 2 : 48 V DC +/- 20%RF Sensitivity : Better than -106dBm.

Power Consumption (Typical)External Antenna : 1 Antenna per 4 GSM Eternity ME10S : 70 W Ports, 3.0 dBi, SMA

Ù Omni Eternity ME16S : 100 W (Female), 50 Eternity GE6S : 30 W Directional with Cable

of 3 meters Length.Eternity ME16S : 10.5 kg (23.1 lbs)

E&M TrunksType : Type IV and Type V EnvironmentSignaling : Pulse 10 PPS, Pulse Operating Temperature : -10° C to 50° C (14° F

20 PPS, DTMF to122° F)Signaling Protocol : Normal, Delay, Wink, Operating Humidity : 5-95% RH, Non-

CCS Signals CondensingSpeech Interface : 2-Wire and 4-Wire Storage Temperature : -40° C to 85° C (-40° F

to 185° F)Transmission Parameters (FXS-FXO) Storage Humidity : 0-95% RH, Non-Return Loss : > 20 dB CondensingInsertion Loss : < 1 dBInter-channel cross-talk : < -65 dBmIdle channel noise : < -65 dBmOpLongitudinal Balance : Better than 40 dB

Additional PortsAnalog Input Port : 0.7 Vrms, Isolated,

Push-Type Connector Analog Output Port : 0.7 Vrms, Isolated,

Push-Type ConnectorDigital Input Port : Loop Sensing-

Open/Close, 5 mA, Push-Type Connector

Digital Output Port : VDC Max = 60 V DC, IDC Max = 0.15A, Push-Type Connector

Switching and ControlType of Switching : PCM/TDM, Digital

Switching (100% Non-blocking)

Type of Control : CMOS Micro-controller with SPC, Distributed Processing, Architecture

Dimensions (W x H x D) Eternity GE6S : Eternity ME10S : Eternity ME16S :

26.0 x14.2 x 24.4 cm (10.2" x 5.6" x 9.6")48.2 x 33.0 x 29.9 cm (19.0” x 12.9” x 11.7”)52.3 x 33.0 x 29.9 cm (20.5” x 12.9” x 11.7”)

Unit Weight Eternity GE6S : Eternity ME10S : Eternity ME16S :

3.5 kg (7.7 lbs)8.3 kg (18.3 lb)10.5 kg (23.1 lb)

Shipping Weight6.5 kg (14.3 lbs)12.3 kg (27.1 lb)15.0 kg (33.0 lb)

Eternity GE6S : Eternity ME10S : Eternity ME16S :

Shipping WeightWall Mount, Table TopWall Mount, Table Top, 19” Rack (Optional)Wall Mount, Table Top

Eternity GE6S : Eternity ME10S : Eternity ME16S :

Compliance

Conducted Emission : CISPR 22 Class A, Radiated Electromagnetic Field : CISPR 22 Class A, FCC Part 15 PartB, Class A Harmonic Current Emission : IEC 61000-3-2Voltage Flicker : IEC 61000-3-3Electro-static Discharge : IEC 61000-4-2Radiated Susceptibility : IEC 61000-4-3Electrical Fast Transient : IEC 61000-4-4Surge : IEC 61000-4-5Conducted Immunity : IEC 61000-4-6Power Frequency Magnetic Field : IEC 61000-4-8Voltage Interruption & Dips : IEC 61000-4-11

FCC Part 15 PartB, Class AEMI/EMC

R&TTE 1999/5/ECLVD 73/23/EECEMC 89/336/EEC

EC Directives

TEC TEC/WR/1/1PX-01/03/140.Nov 07

FCC68 US: MTXMFO1BETERNITY

Safety rdIEC 60950 3 Edition (1999)

Environment Test Cold Test IS:9000 Part 2 / Section 4Dry Heat Test IS:9000 Part 3 / Section 5Damp Test IS:9000 Part 5 / Section 1

Mechanical Vibration Test : IEC 68-2-6Shock Test : IEC 68-2-27

CARDS FOR UNIVERSAL SLOTS

Eternity ME

Eternity ME Card SLT32 32 SLT Ports Card to connect 32 Single Line Telephones

Eternity ME Card SLT16 16 SLT Ports Card to connect 16 Single Line Telephones

Eternity ME Card SLT8 8 SLT Ports Card to connect 8 Single Line Telephones

Eternity ME Card DKP16 16 DKP Ports Card to connect 16 Digital Key Phones

Eternity ME Card DKP8 8 DKP Ports Card to connect 8 Digital Key Phones

Eternity ME Card TRK8 8 TRK Ports Card to connect 8 Two Wire CO Lines

Eternity ME Card TRK8+SLT24 8 TRK Ports and 24 SLT Ports Card to Connect 8 Two Wire CO Lines and 24 Single Line Telephones

Eternity ME Card TRK4+SLT12 4 TRK Ports and 12 SLT Ports Card to Connect 4 Two Wire CO Lines and 12 Single Line Telephones

Eternity ME Card BRI8 8 BRI Ports Card to connect 8 ISDN BRI lines or ISDN Compatible Devices

Eternity ME Card BRI4 4 BRI Ports Card to connect 4 ISDN BRI lines or ISDN Compatible Devices

Eternity ME Card T1E1PRI SINGLE Single Port T1/E1/PRI Card to connect 1 T1/E1/PRI line or T1/E1/PRI Compatible Device

Eternity ME Card T1E1PRI DUAL Dual Port T1/E1/PRI Card to connect 2 T1/E1/PRI lines or T1/E1/PRI Compatible Devices

Eternity ME Card E&M8 8 Ports E&M Card to connect to 8 E&M Lines

Eternity ME Card E&M4 4 Ports E&M Card to connect to 4 E&M Lines

Eternity ME Card MAGNETO8 8 Ports Magneto Card to connect 8 Magneto Phones

Eternity ME Card GSM8 8 Ports GSM Card to insert 8 GSM SIM Cards for GSM Network Connectivity

Eternity ME Card GSM4 4 Ports GSM Card to insert 4 GSM SIM Cards for GSM Network Connectivity

Eternity ME Card VoIP VoIP Card to connect to IP Network for Making VoIP calls. Support 8 VoIP (SIP) Channels per Card

Eternity ME Card VMS 16 Port Voice Mail Server with 512 Mail Boxes to give Voice Mail Box facility to EPBX users ports.

Eternity GE6S

Eternity GE Card SLT16 16 SLT Ports Card to connect Single Line Telephones

Eternity GE Card SLT8 8 SLT Ports Card to connect 8 Single Line Telephones

Eternity GE Card DKP8 8 DKP Ports Card to Connect 8 Digital Key Phones

Eternity GE Card DKP4 4 DKP Ports Card to connect 4 Digital Key Phones

Eternity GE Card DKP4+SLT12 4 DKP Ports and 12 SLT Ports Card to connect 4 Digital Key Phones and 12 Single Line Telephones

Eternity GE Card DKP2+SLT6 2 DKP Ports and 6 SLT Ports Card to connect 2 Digital Key Phones and 6 Single Line Telephones

Eternity GE Card TRK4+SLT4 4 TRK Ports and 4 SLT Ports Card to connect 4 Two Wire CO Lines and 4 Single Line Telephones

Eternity GE Card TRK2+SLT14 2 TRK Ports and 14 SLT Ports Card to connect 2 Two Wire CO Lines and 14 Single Line Telephones

Eternity GE Card BRI4 4 BRI Ports Card to connect 4 ISDN BRI lines or ISDN Compatible Devices

Eternity GE Card BRI2 2 BRI Ports Card to connect 2 ISDN BRI lines or ISDN Compatible Devices

Eternity GE Card T1E1PRI SINGLE Single Port T1/E1/PRI Card to connect 1 T1/E1/PRI line or T1/E1/PRI Compatible Device

Eternity GE Card E&M4 4 Ports E&M Card to connect to 4 E&M Lines

Eternity GE Card GSM4 4 Ports GSM Card to insert 4 GSM SIM Cards for GSM Network Connectivity

Eternity GE Card GSM2 2 Ports GSM Card to insert 2 GSM SIM Cards for GSM Network Connectivity

Eternity GE Card VoIP VoIP Card to connect to IP Network for Making VoIP calls. Support 8 VoIP (SIP) Channels per Card

Eternity GE Card VMS 16 Port Voice Mail Server with 512 Mail Boxes to give Voice Mail Box facility to EPBX users ports.

Accessories

EON42S Digital Key Phone with 42 Keys and 2 lines X 24 Characters display

EON42P Digital Key Phone with 42 Keys and 6 lines X 24 Characters display

DSS72 Direct Station Selector with 72 Keys to be used with Eon42

Eon Soft PC controlled Digital Key Phone.

ORDERING INFORMATION

Product Description

Eternity GE6SAC Eternity with 6 Universal Slots and Universal Power Supply (AC Mains)

Eternity GE6SDC Eternity with 6 Universal Slots and DC Power Supply ( 48VDC)

Eternity ME10SAC Eternity with 10 Universal Slots and Universal Power Supply (AC Mains)

Eternity ME10SDC Eternity with 10 Universal Slots and DC Power Supply ( 48VDC)

Eternity ME16SAC Eternity with 16 Universal Slots and Universal Power Supply (AC Mains)

Eternity ME16SDC Eternity with 16 Universal Slots and DC Power Supply ( 48VDC)

Eternity GE6SAC PLCC Express Eternity with 6 Universal Slots and Universal Power Supply (AC Mains) with PLCC Express Software

Eternity GE6SDC PLCC Express Eternity with 6 Universal Slots and DC Power Supply ( 48VDC) with PLCC Express Software

Eternity ME10SAC PLCC Express Eternity with 10 Universal Slots and Universal Power Supply (AC Mains) with PLCC Express Software

Eternity ME10SDC PLCC Express Eternity with 10 Universal Slots and DC Power Supply ( 48VDC) with PLCC Express Software

Eternity ME16SAC PLCC Express Eternity with 16 Universal Slots and Universal Power Supply (AC Mains) with PLCC Express Software

Eternity ME16SDC PLCC Express Eternity with 16 Universal Slots and DC Power Supply ( 48VDC) with PLCC Express Software

*Check Availability

An ISO 9001 Company, Matrix is a leader in the VoIP, GSM, Key Phone System and PBX market. An innovative, technology driven and customer focused organization; the company is committed to keeping pace with revolutions in the telecom industry. This has resulted in bringing forth of cutting edge products like Digital and ISDN Key Phone Systems, Voice Messaging Products, GSM Gateways, VoIP Gateways, VoIP PBXs, Intercom Security Products and PLCC Switches. With over 1,000,000 line units installed and growing by over 1000 line units per day, the installed base of Matrix connects over 10,000,000 calls everyday. Thus, Matrix has gained the trust and admiration of users representing the entire spectrum of industries, and has won many awards for its innovative products.

SYSTEM RESOURCES

OPTIONAL INTERFACES

System Resources Description Time Slot Maximum Ports

Consumption

GE6S ME10S ME16S

SLT Ports To connect Single Line Telephones 1 96 320 512

DKP/DSS Ports To connect Proprietary Digital Key Phones

or DSS Consoles 2 48 128 128

TRK Ports To connect Two wire CO Lines 1 24 80 128

E&M Ports To connect E&M Network 1 24 80 128

GSM Ports To connect to GSM Network 1 24 16 16

Magneto Trunk Ports To connect Magneto Phones 1 24 80 128

BRI Ports To connect to ISDN BRI Network or ISDN

Compatible Devices 2 24 32 32

T1/E1/PRI Ports To connect to T1 or E1 or PRI Network or

Compatible Devices 32 6 8 8

VoIP Ports To connect to Internet or Intranet for VoIP

(SIP) calling. Support 8 VoIP Ports per Card 1 48 80 128

Voice Mail System To configure as Voice Mail System 16 1 1 1

BUILT-IN INTERFACES

ABOUT MATRIX

DKP/DSS Ports To connect Proprietary Digital Key Phone or DSS Consoles -- 4 4

RS232C Ports To connect to a Computer for SMDR Output 1 2 2

Parallel Printer Ports To connect to a Parallel Printer -- 1 1

Analog Input Ports To connect External Music Device 1 1 1

Analog Output Ports To connect to a Public Addressing System 1 1 1

Digital Input Ports To connect to Sensor or Panic Switch 1 1 1

Digital Output Ports To connect to External Devices like Door Lock or Relay Port 1 1 1

Ethernet Ports To access Web based programming tool "Jeeves" 1 1 1

USB Ports Reserved for Future Application 1 1 1

Voice Modules To configure as Auto Attendant and/or for Recording Voice

messages to be used in other Voice based applications 8 16 16

Conference Maximum No of Simultaneous 3-party Conference 5 7 7

Redundancy To provide Redundancy Option for Master Card,

Switch Card and Power Supply NA Yes NA

System Resources Description GE6S ME10S ME16S

System Resources Description Maximum Capacity

GE6S ME10S ME16S

Universal Slots The Maximum Physical Card Slots 6 10 16

Total Time Slots The Maximum Time Slots 192 384+8* 512+8*

Total Ports The Maximum Physical Ports Available 96 324 516

* 8 Time Slots are Reserved for 4 Built-in DKP Ports

01

.02

-Se

pt ‘0

8