Established Sensing Solutions From Banner

3
34 More information online at bannerengineering.com Banner Legacy Products Established Sensing Solutions From Banner D11/D11E • Economical, high-performance plastic fiber optic sensors • Red, green, blue or white light sources • Immune to subtle signal variations such as web flutter M12 & S18 Laser Emitters • Rugged 12 mm diameter or 18 mm threaded barrel laser emitters • Low power Class 1 or Class 2 laser with visible red beam (670 nm) • M12 emitters: collimated, apertured beam 2 mm in diameter, divergence of less than 1 milliradian • Compatible with a variety of Banner modulated photoelectric receivers Q08 Q10 D11 ECONO-BEAM S12 Laser Emitters VALU-BEAM Q85 Analog OMNI-BEAM The following standard products are still available from Banner. Please go online to bannerengineering.com for full descriptions and technical references. Q08 • Specially designed EZ-BEAM ® style optics and electronics for reliable sensing without the need for adjustments • Opposed and diffuse sensing modes • Ultra thin: only 8 mm deep Q10/Q14 • Economical opposed mode dc sensors in 75 to 10 mm thick right-angle housings • Opposed and diffuse sensing modes • Hermetically sealed optics S12 • Opposed-mode sensor pairs in 12 mm barrel- style housings • Completely epoxy encapsulated for superior durability, even in harsh sensing environ- ments • Innovative dual-indicator system to take the guesswork out of monitoring sensor performance and to warn of marginal sensing conditions or output overload ECONO-BEAM ® • Specially designed EZ-BEAM ® style optics and electronics for reliable sensing without adjustments • Simple to install with no setup adjustments • ac and dc opposed, retroreflective, diffuse, divergent diffuse, convergent, and glass and plastic fiber optic models • 38 mm height VALU-BEAM ® • Economy, performance, and reliability in a rug- ged line of sensors with standard limit-switch mounting hole spacing • Wide choice of standard models for ac, dc or ac/dc operation • SM91EN/RN models: enhanced immunity to sunlight: SMA990 models: built-in 6-digit totalizing. SMI912 series: intrinsically safe sensors for use in hazardous locations Q85 • Economical, rugged sensors • Wiring chamber with dual conduit entrances • Opposed, polarized retroreflective and diffuse sensing modes, available with programmable output timer • Models available for dc, ac or ac/dc universal power Analog OMNI-BEAM Sensor heads for diffuse, convergent, and glass and plastic fiber optic modes • Analog power blocks can be set for 0 to 10V dc • Ideal for applications requiring a continuously variable control voltage that is either directly or inversely related to sensing response Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Transcript of Established Sensing Solutions From Banner

Page 1: Established Sensing Solutions From Banner

34 More information online at bannerengineering.com

Banner Legacy Products

Established Sensing Solutions From Banner

D11/D11E• Economical, high-performance plastic

fiber optic sensors • Red, green, blue or white light sources• Immune to subtle signal variations such as

web flutter

M12 & S18 Laser Emitters• Rugged 12 mm diameter or 18 mm

threaded barrel laser emitters • Low power Class 1 or Class 2 laser with

visible red beam (670 nm) • M12 emitters: collimated, apertured beam

2 mm in diameter, divergence of less than 1 milliradian

• Compatible with a variety of Banner modulated photoelectric receivers

Q08 Q10 D11

ECONO-BEAM S12 LaserEmitters

VALU-BEAM Q85 AnalogOMNI-BEAM

The following standard products are still available from Banner.Please go online to bannerengineering.com for full descriptions and technical references.

Q08• Specially designed EZ-BEAM® style optics

and electronics for reliable sensing without the need for adjustments

• Opposed and diffuse sensing modes • Ultra thin: only 8 mm deep

Q10/Q14• Economical opposed mode dc sensors

in 75 to 10 mm thick right-angle housings• Opposed and diffuse sensing modes • Hermetically sealed optics

S12• Opposed-mode sensor pairs in 12 mm barrel-

style housings • Completely epoxy encapsulated for superior

durability, even in harsh sensing environ-ments

• Innovative dual-indicator system to take the guesswork out of monitoring sensor performance and to warn of marginal sensing conditions or output overload

ECONO-BEAM®

• Specially designed EZ-BEAM® style optics and electronics for reliable sensing without adjustments

• Simple to install with no setup adjustments• ac and dc opposed, retroreflective, diffuse,

divergent diffuse, convergent, and glass and plastic fiber optic models

• 38 mm height

VALU-BEAM®

• Economy, performance, and reliability in a rug-ged line of sensors with standard limit-switch mounting hole spacing

• Wide choice of standard models for ac, dc or ac/dc operation

• SM91EN/RN models: enhanced immunity to sunlight: SMA990 models: built-in 6-digit totalizing. SMI912 series: intrinsically safe sensors for use in hazardous locations

Q85• Economical, rugged sensors • Wiring chamber with dual conduit

entrances • Opposed, polarized retroreflective and

diffuse sensing modes, available with programmable output timer

• Models available for dc, ac or ac/dc universal power

Analog OMNI-BEAM™

• Sensor heads for diffuse, convergent, and glass and plastic fiber optic modes

• Analog power blocks can be set for 0 to 10V dc• Ideal for applications requiring a continuously variable control voltage that is either directly or inversely related to sensing response

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 2: Established Sensing Solutions From Banner

More information online at bannerengineering.com 35

Banner Legacy Products

Established Sensing Solutions From Banner

MAXI-AMP™

• CR, CM and CD series amplifier modules with or without output logic for use with specified remote photoelectric sensors

• Combines power supply, output circuitry and logic timing in CL series module for use with self-contained sensors

• Opposed, diffuse, divergent diffuse, retroreflective, convergent and adjustable-field proximity modes

MICRO-AMP® andRemote Sensors• MA3, MA3-4, MA3AF and MA3P series

amplifier modules for use with specific remote photoelectric sensors

• MA4 series add-on logic modules for output timing or multiple-sensor logic functions in component systems

• Miniature and ultra-miniature remote sensors for use with Banner PICO-AMP™, MAXI-AMP™ or MICRO-AMP® component sensing systems

SM512• Rugged sensors in narrow 127 mm wide

housings • Easily stack for mounting in tight spaces • Opposed, non-polarized retroreflective,

diffuse, convergent and glass fiber optic modes

• DC operation only

Bus-compatible Sensors• Broad range of sensing and housing

choices • Solid-state outputs for connecting directly

to “smart” bus system network junctions• Compatible with DeviceNet™, SDS and ASI

Sonic OMNI-BEAM™ Sensors• 100 to 660 mm range modular ultrasonic

sensor, with 80 to 560 mm window • 10-element moving dot LED range

indicator to simplify setup and monitoring• Convenient modular ac, dc, discrete or

analog design

ULTRA-BEAM™ Sensors• Electrostatic ultrasonic sensor with

sensing range to 6 m • Range or NULL/SPAN adjustments on

top of sensor • Switched ac and dc electromechanical

or analog outputs

MAXI-BEAM®

• Modular design for easy exchange of all sensing components and logic

• Opposed, polarized and non-polarized retroreflective, diffuse, convergent, fixed-field, and glass and plastic fiber optic modes

• Interchangeable heads with 90˚ increment rotation

MULTI-BEAM®

• Industry’s most flexible modular sensor family with more than 5,000 custom configurations for ac or dc power

• Opposed, polarized and non-polarized retroreflective, convergent and glass fiber optic modes

PICO-AMP™

• Ideal for remote sensing in wafer handling, small-part sensing and pharmaceutical applications

• Three frequency selections to prevent multiple-sensor crosstalk

• Variety of sensing heads in opposed and diffuse mode

MAXI-BEAM MULTI-BEAM PICO-AMP

MAXI-AMP MICRO-AMP SM512

Bus Sensors SonicOMNI-BEAM

ULTRA-BEAM

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Page 3: Established Sensing Solutions From Banner

36 More information online at bannerengineering.com

Banner Legacy Products

Established Sensing Solutions From Banner

BEAM-ARRAY™

• Multiplexed emitter-receiver arrays for use in hostile industrial environments

• Three outputs offered; logic level “trip” output, dc sourcing analog or serial RS-232 data stream

• Optional controllers offer expanded sensing response options and outputs with sensor separation up to 3 m

LS• Simple, economical, reliable light screen

senses small parts passing anywhere through the beams

• 3 ranges and resolutions • Fast 1 millisecond response; built-in

5 millisecond output pulse stretcher

BMLV• An ideal system for sensing or counting

large objects falling through a sensing area using a retroreflective target

• Minimum object size is 50 mm at 0.6 m from the sensor, and 125 mm at 21 m

• Light-operate or dark-operate output

R55 and R55 Expert™

• Reliable color-mark sensors for outstanding detection and resolution

• Choice of two lens positions• Expert™ model with easy push-button

TEACH-mode setup and remote programming

BEAM-ARRAY LS BMLV

R55

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com