ESTABLISHED 1982 Visit us at … · ESTABLISHED 1982 Visit us at ... Score Patterns-Featuring out...
Transcript of ESTABLISHED 1982 Visit us at … · ESTABLISHED 1982 Visit us at ... Score Patterns-Featuring out...
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
COLOR BANDS
024 ARCTIC WHITE 024 NUWHITE 024CE WHITE
019 STUCOO WHITE 024 TUFFCOAT WHITE 024 SMOOTH COLONIAL
019 STUCCO COLONIAL 024 CEDAR COLONIAL 024 TUFFCOAT COLONIAL
019 CEDAR BLACK 019 CEDAR CHARCOAL 019 CEDAR SILVER
019 CEDAR BURGUNDY 019 CEDAR RED WHITE FIBERGLASS
COLONIAL FIBERGLASS WHITE PEBBLE ROOF FLEX 024 SEAMLESS ROOFING
024 PROWLER STRIPE 024 MALLARD STRIPE 024 WILDERNESS STRIPE
024 STARBRIGHT
1
The Metal Company 5509 Harlan Street
Arvada Colorado 80002 Phone 303-423-4425 Fax 303-423-4051
Toll Free 1-800-231-0401 www.themetalcompany.com
TABLE OF CONTENTS
Aluminum Siding Page 53 How To Order Page 53 Score Patterns-Featuring out “Life Size” Pattern Reference Pages 54-60 Stripping Color Bands Pages 61-62 Stripping Color Chart Pages 63-64
Aluminum Sign Stock Page 17 Aluminum Sign Stock Color Chart Page 67
Baggage & Entrance doors Pages 11-13 Baggage Door Order Form Page 12
Custom Aluminum & Fabrication Page 14
Fiberglass Products—Fiberglass Siding In Pebble Grain Or Smooth Finish Page 18
Galvanized Sheet & Galvanized Cans Page 10
Molding Products—Exterior Moldings, Trim, Screw Cover, Insert Trim & Screws Pages 8-9
Rocky Tops, Rock Guards Page 15
Roofing Systems-Rubber Roofing, Seamless Roofing, Luaun Paneling Page 19
Sealants & Adhesives-Putty Tape, Butyl Tape, Silicon, Rubber Roof Glue, Rubber Pages 4-5 Roof Caulking, & Plas-T-Cote
Terms & Conditions-Shipping & Packaging Information Page 3
Vents & Accessories-Elixir Roof Vents Replacement Lids, Escape Hatches & Lids, Plumbing Vents, & A/C Shrouds
Pages 6-7
Structural Aluminum Page 16
Tanks Page 20 Holding Tanks by Length and Capacity Page 25 Water Tanks by Capacity Pages 21-22 Water Tanks by Length Pages 23-24 Holding & Water Tank Diagrams Pages 30-52 Holding & Water Tank Fittings Pages 26-28 Holding & Water Tank Order Form Page 29
2
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
TERMS AND CONDITIONSTERMS: All orders will be shipped C.O.D. unless credit has been established with our credit department. Otherwise, our terms are Net 30. All invoices 30 days past due will be assessed a service charge of 1.5% of past due balance, charged monthly.
PRICES: Although every attempt will be made to keep our customers informed of pricing changes All prices are subject to change without notice.
RETURN POLICY: Returns will be accepted on stocking items only, and must be pre-authorized. Cus-tom manufactured products are non-returnable. Returns may be subject to a 10% re-stocking fee.
TAXES: All products sold will be charged applicable sales tax unless we have a valid sales tax exemption certificate on file in our office. NO EXCEPTIONS!
FREIGHT POLICY: All orders will be shipped F.O.B. Arvada, Colorado. Shipments will be made via Fed-Ex Ground whenever possible. Please specify your preference as to common carrier.
WARRANTY: The Metal Company offers no war-ranty, express or implied, regarding the suitability of any products for specific applications. Our liability is for product replacement only when deemed defective. Warranty does not include labor, or any other addi-tional expenses that may occur through improper use or application before defect is discovered. The only war-ranties applicable are those offered by product manu-facturer. We will gladly forward any product, sold by us, to the manufacturer for warranty consideration, however, we have no authority to determine war-rantability, that is the sole discretion of the manufac-turer.
FREIGHT CLAIMS AND SHORTAGES: We take great care to insure that all our products are in good condition as they are packaged for shipping, therefore, all freight shortages or damages are the responsibility of the consignee. Any claims therein must be filed with the carrier. Be sure to have the carrier acknowledge damage or shortage upon receipt of merchandise.
SHIPPING & PACKING INFORMATIONAluminum is shipped common carrier in specially designed cardboard tubes that are 16” or 12” in diameter by 12’ long. We can combine tubes together, (up to 2 tubes) to get a max length of 24’. Additionally, a packaging charge on aluminum of $25.00 per man hour will be applied when crates must be made. If you have a carrier you prefer, or receive a discount with, please let us know when you place your order.
16” x 144” (12’) Cardboard Shipping Tubes 12” x 144” (12’) Cardboard Shipping Tubes
Water & Holding Tanks are shipped via Federal Express. They can be shipped via ground or next day air. (Note that next day air shipping can get quite expensive on tanks that are oversized.) The cost of shipping tanks is the current Federal Express rate. If additional packaging is needed, there may be a small fee. Additional shipping fees will be discussed with you before we ship out your tank. (WE DO NOT SHIP UPS!)
All other products are shipped via Federal Express and charged at the current Federal Express rate.
3
The Metal Company Phone (303)423-4425 Fax (303)423-4051 Toll Free 1-800-231-0401
ADHESIVES & SEALANTS
tight Silicone
S1420-3/16 x
S1418-3/16
TAPE
Formu-
Plas-T-Cote is a non-asphalt, high quality
ELASTOMERIC ROOF
ties.roof.
S2225-S2227-
to and non
and
Putty tape is formulated to be a good quality, inexpensive, and easy-to-use extruded tape for all purpose weather-
sealing. treated paper backing assures ease of use. Not made for use with rubber roof. Sold by the case only.
ORDER NUMBERS: S1412-1/8 x 3/4 x 50’ Putty tape
1 x 20’ Putty tape S1422-3/16 x 3/4 x 20’ Putty tape
x 1 1/2 x 20’ Putty tape
PUTTY TAPE PREMIUM BUTYL
A premium quality, pressure sensitive extruded butyl tape. Permanent resil-ience and elongation properties.lated for particularly difficult seal appli-cations, or where superior quality tape is needed. 3/4” tape is gray color, 1-1/2” tape is black. Can be used with rubber roof. Sold by the case only.
ORDER NUMBERS: S1414-1/8 x 3/4 x 30’ Black Butyl tape S1410-1/8 x 1-1/2 x 0’ Grey Butyl tape S1416-1/8 x 3/4 x 30’ White Butyl tape
PLAS-T-COTE ROOF COATING
chemically engineered roof coating that con-tains long fibers, pigments and non-drying resins. It is a thick coating that conforms to and protects against all weather conditions. Plats-T-Cote alkyd stays flexible, contracts and expands with roof seams. 40-50 square foot per gallon coverage. Not suitable for rubber roofs. Available in aluminum or white
ORDER NUMBERS:
S2210-Qt. Alum. Plas-T-Cote S2212-Gal. Alum. Plas-T-Cote S2214-5 gal. Alum Plas-T-Cote S2216-Qt. White Plas-T-Cote S2218-Gal. White Plas-T-Cote S2220-5 gal. White Plas-T-Cote
COATING
Ideal for rubber roofs, Plas-T-Cote elastomeric has outstanding reflec-tive and protective coating proper-
Expands and contracts with Resists cracking and with-
stands impact. 200-300 square feet of coverage per gallon.
ORDER NUMBERS: Qt. Elastomeric roof coating Gal.Elastomeric roof coating
SILICONE SEALANT
Silicone is a permanently elastic, medium-high strength sealer for gen-eral glazing in RV’s and modular homes. A moisture curing, one part sealant with excellent adhesionmetal and glass. 10.1 oz tubes. Available in clear, white, and colo-nial.
ORDER NUMBERS:
S1428-Colonial Silicon S1430-Clear Silicon S1432-White Silicon
SPRAY ADHESIVE
Bostick High performance aerosol adhesive, SUPERTAK forms strong one surface bonds, permanent bonds between porous porous surfaces, speeds product assembly, adheres to metal and most plastics, has a 2 way variable nozzle,does not contain methylene chloride or ozone depleting chemicals.
ORDER NUMBER:
S1000-SuperTak Adhesive
4
The Metal Company Phone (303)423-4425 Fax (303)423-4051 Toll Free 1-800-231-0401
ADHESIVES & SEALANTS
roof air and
in and white.
S1012– Lap Sealant, White
EPDM rubber roofs.
S1610
RUBBER ROOF
RUBBER ROOF WATER-
Easily applied
per case.
PATCHIT ROOF KIT
kit
with butyl oz
Rubber roof lap sealant renders a water tight seal along roof edges,
vents, conditioners screw heads. Butyl based, it is com-pletely compatible with EPDM roof-ing material and offers excellent adhesion to most substrates. Its self leveling property improves the abil-ity to continuously seal and remain flexible. Available ivory
ORDER NUMBERS: S1010– Lap Sealant, Ivory
LAP SEALANT RUBBER ROOF REPAIR KIT
This handy repair kit has everything needed to repair punctures and tears in
Kit includes: 6sq. ft. of rubber roofing material, 1 qt. of splicing cement, 1-11oz tube of lap sealant, and repair instructions.
ORDER NUMBER: Rubber Roof Repair Kit
INSTALLATION KIT
This installation kit contains every-thing needed for proper rubber roof installation. Kit includes: 2 gallons of rubber roof adhesive, 150 feet of bu-tyl tape, 10-12oz tubes of lap adhe-sive, and easy-to-follow instructions. Enough material to install a 40’ roof. Kit does not include rubber roof.
ORDER NUMBERS: S1021– Rubber roof Installation Kit
BASED ADHESIVE
This water based, rubber roof adhesive is ideally suited for adhering EPDM roof material to wood substrate. with brush or roller, provides approximately 200 sq. ft. cover-age per gallon. Not suitable for splicing. Gallon containers, 4
ORDER NUMBERS: S1014- Rubber to Wood Adhesive
PATCHIT roof repair offers superior adhesion, withstands wide range of temperatures and environments, remains flexible, contains aggressive gripping ad-hesive and is easy to install.
The roof repair kit contains 1—9” x 10” construction grade EPDM rubber patch coated adhesive/sealant, 1 –11 tube industrial sealant.
ORDER NUMBERS: S1612– Patchit Roof Repair
SPLICE ADHESIVE
Repairs small tears. Used when bonding rubber to rubber. Avail-able in quart cans.
ORDER NUMBERS: S1016– Splice adhesive
FOR RUBBER ROOF MATERIAL SEE PAGE…………….19
5
The Metal Company Phone (303)423-4425 Fax (303)423-4051 Toll Free 1-800-231-0401
VENTS & ACCESSORIES
with
fit all
R.O.’s. Available with white,
/
fresh
Bottomview
Hingeview
New
Topview
Hingeview
Bottomview
Hingeview
Bottomview
Hingeview
New lid with a
lid to
V2256-White
ELIXIR 14X14 VENTS
New universal vent from Elixir features self-centering metal base
radius corners and interior garnish with wider 1-1/4” flange to
14”x14” roof openings. Truly universal, it fits all existing
smoked, or metal lids with 1-3/4” - 2 -2 3” garnish
ORDER NUMBERS: V2201– Metal vent complete V2202– Smoke vent complete V2203– White vent complete
ELIXIR 14X14 12V VENT
Convenient 12V powered, 14x14 roof vent is ideal for providing
air, especially in bath-rooms. Available with a white lid, with 1-3/4” - 2-3/4” garnish.
ORDER NUMBERS: V2205-12V White vent complete
ELIXIR UNIVERSAL 14X14 REPLACEMENT COVERS
universal replacement covers from Elixir feature new hinge design that will interchange with current Ventline style roof vents. Available in white, smoke, or metal.
ORDER NUMBERS: V2247-Metal replacement cover V2248-Smoked replacement cover V2249-White replacement cover V2259-Unbreakable White cover
ELIXIR OLD 14X14 REPLACEMENT COVERS
Old style Elixir travel-trim replace-ment covers. Available in white, smoked, or metal.
ORDER NUMBERS: V2242-Metal replacement cover V2243-Smoked replacement cover V2244-White replacement cover V2260-Unbreakable White cover
JENSEN OLD STYLE REPLACEMENT COVERS
Old style Jensen replacement cover for the traditional Jensen vent with the interlocking hinge & rod attachment. Available in smoke or white.
ORDER NUMBERS: V2251-Smoke replacement cover V2252-White replacement cover V2258-Unbreakable White cover
JENSEN NEW STYLE REPLACEMENT COVERS
style Jensenunique hinge system allows the
be attached without the hinge pins, thus minimizing the number of parts exposed to weathering. Available in smoked or white.
ORDER NUMBERS: V2255-Smoke replacement cover
replacement cover V2254-Amber replacement cover
6
The Metal Company Phone (303)423-4425 Fax (303)423-4051 Toll Free 1-800-231-0401
VENTS & ACCESSORIES
Call size/ /
15x2222x2226x26
13x20
15x2222x2226x26
V2230– 26x26
All four
13x22OR
15x22
22x22OR
26x26
Elixir garnish, o/s Elixir garnish, o/s Elixir garnish, n/s Elixir garnish, n/s
V2272V2273
n/sn/s
etc. Available in polar white
/
Avail-
easy
Cut-out dimension 13x20** 14 1 4” x 21 1 4”
17 1/2” x 24 3/4” 21 1/4” x 21 1/4” 26” x 26”
**not to be used for OEM installation, available with plastic frame only
ORDER NUMBERS: V2221– 13x20 Escape vent complete V2224– 15x22 Escape vent complete V2226– 22x22 Escape vent complete V2228– 26x26 Escape vent complete
REPLACEMENT COVERS V2222– Replacement cover V2223–17x20 Replacement cover V2225– Replacement cover V2227– Replacement cover V2229– Replacement cover
Old style Elixir cover
ELIXIR ESCAPE HATCHES
Elixir escape vents feature a sturdy frame of heavy gauge aluminum extrusion that installs easily and assures secure mounting. Depend-able operation featuring leak resis-tant lid and weather-tight frame. Instant exit screen opens quickly to assure fast and easy exit. sizes come with opaque white lid and 2”garnish.
VENT REPAIR PARTS
GARNISH
V2260 1 3/4” to 2 3/4” V2261 2 5/8” to 3 3/4” V2262 1 3/4” to 2 3/4” V2263 2 5/8” to 3 3/4”
Vent operator assembly Vent operator crank
OPERATOR CRANK
SCREEN & FRAME
V2267 Elixir Screen & Frame, Non 12V,V2268 Elixir Screen & Frame, 12V, V2270 12V Vent fan blade V2271 12V Vent fan motor V2274 Red Catch for hatch
ELIXIR 9X9 MINI-VENT
Convenient 9x9 vent is ideal for providing fresh air in small places such as bathrooms, passageways,
with 7/8” garnish.
ORDER NUMBERS: V2211-Polar white vent complete
JENSEN STYLE ESCAPE HATCH COVERS
Replacement covers for Jensen style Escape Hatches. Available in 3 sizes, all in opaque white.
ORDER NUMBERS: V2234-16x23 Replacement cover V2235-22x22 Replacement cover V2236-26x26 Replacement cover
ELIXIR PLUMBING VENTS
For use with pipes up to 2” in diameter with a 2-1 2” projection above the roof. Unique locking arm fits snugly into place.able in polar white.
ORDER NUMBERS: V2282-Polar white plumbing vent
AERO-FLOW VENTS
The perfect combination, super high glow fresh air ventilation and a swing open design forcleaning 30% more open vent area than traditional vent covers.
ORDER NUMBER: V2209-Aero-flow vent cover
7
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
MOLDING PRODUCTS
l
l i iwhite.
ORDER NUMBERS:
Small Lip Insert Trim ( ) vi l
l ill fini
ORDER NUMBERS:
vinyl i ll i i
ORDER NUMBERS:
le in l
ORDER NUMBERS:
Regular Drip Rail
l l il
ORDER NUMBERS:
l
ORDER NUMBERS:
l
ORDER NUMBERS:
Flat Lip Insert Trim
Flat insert molding accepts standard 1” viny insert. 5/32” mounting holes punched on 4” centers. Availab e in mill fin sh, colon al white, and polar
M3816—FLAT INSERT, COLONIAL M3817—FLAT INSERT, MILL FINISH M3818—FLAT INSERT, WHITE
Small lip 3/16” corner molding accepts standard 1” nyinsert. 5/32” mounting holes punched on 4” centers.Availab e in m sh, colonial white, polar white.
M3825—SMALL LIP TRIM, COLONIAL M3826—SMALL LIP TRIM, MILL FINISH M3827—SMALL LIP TRIM, WHITE
Large Lip Insert Trim Large lip (7/16”) corner molding, accepts standard 1”
nsert. 5/32” mounting ho es punched on 4” centers. Availab e in mill fin sh, colon al white, and
M3820—LARGE LIP TRIM, COLONIAL M3821—LARGE LIP TRIM, MILL FINISH M3822—LARGE LIP TRIM, WHITE
Insert Extended Leg Trim Insert extended leg trim, 16’ long. Availabco onial white, and polar white.
M3828—INSERT EXTENDED LEG, COLONIAL M3830—INSERT EXTENDED LEG, WHITE
Regular drip rail molding, 16’ long. 5/32” mounting ho es punched on 4” centers. Availab e in mill fin sh, co onial white, and polar white
M3839—DRIP RAIL, COLONIAL M3840—DRIP RAIL, MILL FINISH M3841—DRIP RAIL, WHITE
Insert Gutter Trim Insert gutter trim, 16’ long. Availab e in polar white M3801—INSERT GUTTER TRIM, WHITE
Insert awning drip rail Combination insert/awning/drip/rail, 20’ long. Accepts 1/4” awning poly cord and 1” viny insert. 5/32 mounting holes punched on 4” centers.
M3814—INSERT AWNING DRIP, WHITE
8
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
MOLDING PRODUCTS
5/32” mounti
ORDER NUMBER:
roll l i li
ORDER NUMBERS:
l i l
ORDER NUMBERS:
WHITE
i l l in l l
ORDER NUMBERS:
l il
ORDER NUMBERS:
Small Cap Trim
l il
ORDER NUMBERS:
Awning Rail i i l
long.
ORDER NUMBERS:
Insert Awning Rail
l
ORDER NUMBERS:
ORDER NUMBERS: M3802—LARGE CORNER MOLDING, WHITE
l in mill fini i
ORDER NUMBERS:
M3833—CORNER EDGE TRIM, WHITE
Vinyl Cap Trim Base 12’ trim cap base, accepts either #100 or #125 vinyl cap.
ng holes punched on 4” centers.
M3865-VINYL CAP TRIM BASE/MILL FINISH
Vinyl Cap Trim Vinyl cap trim for use on trim base listed above. 250’
s or by the foot. Avai able n co onial white and polar wh te.
M3870—#100 CAP, COLONIAL/250’ M3871-#125 CAP COLONIAL /250’
1” Vinyl Insert High quality, 1” soft vinyl insert rim resists fading and premature cracking. Sold in 1000’ rolls or by the foot. Availab e in colon al white, polar white, b ack and brown.
M3480-1000’ VINYL INSERT, BLACK M3481-1000’ VINYL INSERT, COLONIAL M3482-1000’ VINYL INSERT,M3485-BLACK VINYL INSERT/FT M3486-COLONIAL VINYL INSERT/FT
3/4” Vinyl Insert High quality, 3/4” vinyl insert trim resists fading and premature crack ng. So d by the foot. Avai ableco onial white, po ar white, black and brown
M3475—BLACK VINYL INSERT/FT M3476—COLONIAL VINYL INSERT/FT M3477—WHITE VINYL INSERT/FT
Large Cap Trim Large cap trim, 16’ long. #8 holes drilled and countersunk on 4” centers. Availab e in mill fin sh, co onial white, and polar white.
M3846—LARGE CAP TRIM, COLONIAL M3847—LARGE CAP TRIM, WHITE
Small cap trim, 16’ long. #8 holes drilled and countersunk on 4” centers. Availab e in mill fin sh, co onial white, and polar white.
M3850—SMALL CAP TRIM, COLONIAL M3851—SMALL CAP TRIM, WHITE
Standard awn ng rail, accepts 1/4” awn ng po y cord. 5/32” mounting holes punched on 4” centers, 20’
M3805-16’ AWNING RAIL, COLONIAL M3806-16’ AWNING RAIL, MILL FINISH M3807-16’ AWNING RAIL, WHITE
Combination insert trim and awning rail, 20’ long. Accepts 1/4” awning poly cord and 1” viny insert. 5/32 mounting holes punched on 4” centers.
M3803-INSERT/AWNING, WHITE 20’
Large Corner Molding 9/16” x 1 1/2” Extruded white large corner 16’ lengths. Drilled and countersunk on 6” centers
Regular Edge Molding Regular edge corner trim molding, 16’ long. 5/32” mounting holes punched on 4” centers. Avai able
sh, colon al white, and polar white.
M3831—CORNER EDGE TRIM, COLONIAL M3832—CORNER EDGE TRIM, MILL FINISH
9
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
PROPANE & COMPARTMENT CANS
LP, compartment, wheel wells, and battery cans are manufactured from heavy duty 28 ga. gal-vanized steel for strength and durability. When ordering custom cans, be sure to specify the depth measurement!
LP CANS WHEEL WELLS
STORAGE COMPARTMENTS BATTERY CANS
New!
NOTE: SOME CAN SIZES ARE AVAILABLE IN PLASTIC
10
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
BAGGAGE DOORS
CUSTOM RADIUS OR SQUARE DOORS, ANY SIZE, ANY COLOR!
PROPANE & LOUVERED ACCESS DOORS
Louvered access doors for refrigerators, batterycompartments, or wherever venting is required.Available in square or radius corner.
All doors feature heavy duty extruded aluminum frames built for durability, long life and are available in square or radius corner style. Panels can be aluminum, smooth or embossed, or smooth fiberglass in a large array of colors to choose from. Frames come in mill finish only.
SQUARE OR RADIUS COMPARTMENT DOORS
Baggage compartment doors in square and radius corner. Available with a single panel or double insulated panel.
GENERATOR ACCESS DOORS
Generator doors with expanded metal inserts or louversplaced where needed. Available in radius or square corner.
SPECIALTY ACCESS DOORS & GOOF PLATES
Specialty compartment doors, split style or double door style also available. Solid or louvered in many configura-tions. Goof plates made of .024 aluminum in a variety of sizes and colors to accommodate most venting require-ments, or covering up that screw gun ding.
CUSTOM MADE TO YOUR SPECIFICATIONS!
11
_________
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
BAGGAGE & ACCESS DOORS CUSTOM MADE TO YOUR SPECIFICATIONS!
Baggage, Battery Access, Generator Access, Propane Access, or Refrigerator Access doors available in most any configuration you could possibly need! Custom made to your specifications
Ordering is EASY…….Just answer the questions below to receive the custom baggage or access door you need!
X
Top
Left Right
Fiberglass
Yes No *NOTE:
Dealer_________________________________Contact______________________
Address______________________________City__________State___Zip_______
Telephone___________________Fax____________________________________
WHAT SIZE IS IT? Please tell us the Cut-out dimensions for your door. This is the rough opening in the side of the coach.
Height___________inches Width___________inches
*note– Please measure accurately!! We are not responsible for incorrect measurements!
WHAT STYLE OF DOOR? Baggage door Propane door Battery Access door
Generator Access door Refrigerator Access door Double/Combination door
WHAT TYPE OF FRAME AND WHERE IS THE HINGE? FRAME TYPE HINGE LOCATION
Square Corner Bottom
Radius Corner
WHAT KIND OF PANEL DOES IT NEED? MATERIAL COLOR AND TEXTURE
Aluminum Color Smooth Cedar Embossed Stucco
INSULATED NOT ALL COLORS ARE AVAILABLE IN ALL TEXTURES
WHAT KIND OF LOCK DOES IT NEED? Type of Lock:
Twist Key Number of locks____________ *NOTE: WE RECOMMEND (1) LOCK FOR EVERY 24” OF HINGE
SPECIAL INSTRUCTIONS
COPY THIS FORM, FILL IN INFORMATION, AND FAX US AT 303-423-4051
12
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
EXTERIOR DOORS & ACCESSORIES
attached.
deadbolt. corner doors
K1852 – K1853—
K1860-Window frame set-Black K1862-Window frame set-Colonial K1863-Window frame set Polar
le
le
SQUARE RV ENTRANCE DOORS
RV combination entrance doors feature rugged solid foam core construction with full perimeter steele framing. Ex-truded aluminum surrounds for strength and durability. Full size screen door
All doors are RH, swing and come with a pebbled fiberglass exterior. 12 x 21 clear safety glass window, and feature the Trimark lock with built-in
Square are available with mill finish frame only.
ORDER NUMBERS:
K2266– 22 X 66 RH Entrance door K2268– 22 x 68 RH Entrance door
K2468- 24 x 68 RH Entrance door K2470– 24 x 70 RH Entrance door K2472– 24 x 72 RH Entrance door K2474– 24 x 74 RH Entrance door K2476– 24 x 76 RH Entrance door
K2668– 26 x 68 RH Entrance door K2670– 26 x 70 RH Entrance door K2672– 26 x 72 RH Entrance door K2674– 26 x 74 RH Entrance door K2676– 26 x 76 RH Entrance door K2678--26 x 78 RH Entrance door
K2870– 28 x 70 RH Entrance door
DOOR LOCK
Replacement door lock from Trimark fea-tures a built-in deadbolt assembly for the ultimate in security, safety, and style.
ORDER NUMBERS:
Trimark Lock w/deadbolt Trimark lock with striker plate
WINDOW FRAMES
12” x 21” Replacement window frames for all types of RV entrance doors. Complete sets include inner and outer frame.
ORDER NUMBERS:
K1865-Clear safety glass
RADIUS RV ENTRANCE DOORS
Radius corner entrance doors are built us-ing strong extruded aluminum , damage resistant fiberglass and feature the Trimark lock with built-in deadbolt, sturdy screen door, patented “bullet latch” secures the screen door to the primary door and frame. Radius corner doors are available with white frame only.
ORDER NUMBERS:
KR372- 30 x 72 RH Entrance door KR476– 24 x 76 RH Entrance door KR672– 26 x 72 RH Entrance door
ORDER NUMBERS: B3080—ELIXIR SCREW COVER, BLACK B3082—ELIXIR SCREW COVER, COL. WHITE B3083—ELIXIR SCREW COVER, POL. WHITE
Elixir screw cover
Elixir style screw cover, 10’ lengths. Availabin colonial white, polar white, black and brown.
ORDER NUMBERS: B3070—PHILLIPS SCREW COVER, BLACK B3072—PHILLIPS SCREW COVER, COL.WHT B3073—PHILLIPS SCREW COVER, POL. WHT
Phillips screw cover
Phillips style screw cover, 10’ lengths. Available in colonial white, polar white, black, and brown.
ORDER NUMBERS: B3062—HEHR SCREW COVER, COLONIAL
Hehr screw cover
Hehr style screw cover, 10’ lengths. Availabin colonial white, polar white, black and brown.
SCREW COVER
13
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
CUSTOM ALUMINUM & STEEL FABRICATIONUsing structural aluminum and steel sheet we can craft anything you can imagine. We can con-struct truck racks, hitch covers, steel roll cages, go cart frames, race car body parts, hitch mount baggage compartments, window well covers, all custom made to your needs. If you can dream it, we can build it!
WINDOW WELL COVERS
TRUCK RACKS
HITCH MOUNT COMPARTMENT BOX
TRAILER HITCH COVER
AB
C
RADIUS BOTTOM SKIRTS
A=Measurement from end of piece to center of radius B=Overall measurement of piece C=Length measurement
14
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
ROCKY TOPS, ROCK GUARDS, & SCREWSRocky Tops are steel replacement A/C shrouds made by The Metal Company. Rocky Tops are made of 24 gauge steel, will not crack or break, provides great protection for all A/C components from the elements; an optional rear guard to protect condenser coils is also available. The RT2001 features an aerodynamic front that reduces lift and deflects branches, while the RT2000 has a sleek design that mirrors OEM equipment.
Rocky Top A/C Cover Boxed Rocky Top A/C Cover ORDER NUMBER: ORDER NUMBER :
RT2001 RT2000
SQUARE CORNER ROCK GUARD HALF RADIUS ROCK GUARD FULL RADIUS CORNER ROCK GUARD
Travel trailer and 5th wheel rock guards available to fit most coaches. Three styles to choose from; square corner, radius corner, and half radius corner. Rock guards feature aluminum frames in your choice of mill finish, black, and brown. Fiberglass inserts in colonial white or polar white. All guards are shipped via Fed-Ex, and come ready to assemble with all hardware.
Available heights: 16”, 20”, 24”, 28”, 30”, and 32”. Available widths: 30”, 45”, 62”, 68”, 75”, 82”, 85”, 90”, and 94”.
When ordering please specify style, frame, color, insert color, height, and width. Please note that all widths are not available in all heights.
*ALL ROCK GUARDS ARE SPECIAL ORDER, PLEASE ALLOW 10 DAYS FOR SHIPPING* *please specify size and color when ordering*
MH/RV UNSLOTTED, HEX WASHER HEAD SCREWS
#8 Hex zinc washer screws suitable for most exterior and interior jobs.
ORDER NUMBERS:M2601– Pkg/100 Zinc Finish 8 x 3/4”M2602– Pkg/100 Zinc Finish 8 x 1”M2603– Pkg/100 Zinc Finish 8 x 1-1/4”M2604– Pkg/100 Zinc Finish 8 x 1-1/2”M2620– Pkg/500 Zinc Finish 8 x 3/4”M2621– Pkg/500 Zinc Finish 8 x 1”M2622– Pkg/500 Zinc Finish 8 x 1-1/4”M2623– Pkg/500 Zinc Finish 8 x 1-1/2”
15
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
STRUCTURAL ALUMINUM
These are all stock sizes. If there is a product you do not see here, please call us, it may be something we can get. Our supplier is local, so there is a short turn around for products we do not stock. We are happy to make calls and locate exactly what you are looking for.
1 x 1 x .045 x 288 Order Number: X1000
1 x 1-1/2 x .062 x 288 Order Number: X1010 1 x 2 x .055 x 288 Order Number: X1005
“U” channell
1 x 1 x .047 x 192 Order Number: X4000
3/4 x 3/4 x .063 x 192 Order Number: X2007 1 x 1 x .063 x 192 Order Number: X2006
Flat strap
2 x .090 x 144 Order Number: X3020 .50 x .0125 x 144 Order Number: X3000
.75 x .25 x 144 Order Number: X3005
1”
Square tubing
Rec tubing
Angle aluminum
Bar Stock
3/4”
1/4”
12’
24’
16
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
ALUMINUM FOR SIGNS
Established for the sign industry, the material is painted on both sides, and has a protective film. Great for utility trailers & bottom radius skirts!
We do not charge for cutting!
WE CUT IT
FREE
COLORS AVAILABLE
YELLOW—ORANGE—PURPLE—GLOSS BLACK
MATTE BLACK—IVORY—PEPSI BLUE
BRIGHT BLUE—BRIGHT GREEN—BRIGHT RED
AND RED
We cut radius corners! Call us for special fabrication
STOCK SIZES 18” X 24”
040
12” X 18” 040
6” X 18” 040
6” X 24” 040
SIZES & THICKNESS
4’ X 8’ 032 WHITE 4’ X 10’ 032 WHITE 4’ X 12’ 032 WHITE
4’ X 8’ 040 WHITE & COLORS 4’ X 10’ 040 WHITE 4’ X 12’ 040 WHITE
4’ X 8’ 063 WHITE 4’ X 10’ 063 WHITE
4’ X 8’ 080 WHITE
SEE COLOR CHART ON PAGE………..67 17
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
FIBERGLASS SIDING
RIBBED FILON
wide.)
)
Ribbed fiberglass sheets, 4’x 25’. Sheets have a 3” mesa pattern. Available in Polar White and Colonial White.
ORDER NUMBERS: F9002– 4’x25’ Ribbed fiberglass—Polar White F9000--4’x25’ Ribbed fiberglass—Colonial White
SMOOTH FIBERGLASS SIDING
Smooth fiberglass siding available in any length in your choice of 4’ or 8’ widths. Available in Colonial White, or Polar White. Smooth fiberglass siding is cut to your specifications (Colonial fiberglass is only available 8’6”
ORDER NUMBERS: Smooth Colonial Fiberglass—8’6” wide available Smooth White Fiberglass-4’, 8’6” widths available Pebble Roof-Flex White -8’ wide
PEBBLE ROOF-FLEX SIDING
Pebble roof-flex fiberglass siding available in any length in 8’ wide, in Polar White. Pebble rooflex fiberglass siding is cut to your specifications
ORDER NUMBERS: Pebble Roof-Flex White -8’ wide
WE ALSO HAVE LUAUN! (SEE PAGE 19
18
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
ROOFING SYSTEMS
rubber roofing
Brite-Ply EPDM
Brite-Ply EPDM
EPDM a
BriteTEK is available with
.
METAL ROOFING
NEW!
RUBBER ROOFING & THERMOPLASTIC (FELT-BACK) MATERIAL
Brite-Ply EPDM makes recreational vehicles quieter by eliminating roof rumble and noise from wind, rain, and hail. It assures a water tight roof that is maintenance free and saves energy through its heat reflecting characteristics.
sheeting is the only rubber roofing that is extruded. This unique process results in a sin-gle-ply EPDM sheeting that is highly puncture and tear resistant, has superior tensile strength, and is both re-flective and refractive to UV rays. The extrusion proc-ess provides a more even distribution of ingredients which resists fading or chalkiness of the installed roof.
Brite-Ply EPDM membrane passes the ASTM 20 year accelerated aging test with no discoloration. The supe-rior performance of the membrane is assured by the manufacturer’s 10 year warranty.
is 9’6” wide and is custom cut to your specifications.
BriteTEK Roof Membrane blends the benefits of and TPO (thermoplastic olefin) providing
watertight roof that is easy to install and maintain. BriteTEK has superior puncture and tear resistance and is tested by Carlisle Syntec to assure long term per-formance. Carlisle’s BriteTEK membrane resists un-even weathering and fading and passes the ASTM 20 year accelerated aging test. or without fleece backing.
SEAMLESS METAL ROOFING
Seamless roofing material, 102” wide. Mill finish .024 aluminum with no score pattern. Seamless roofing is cus-tom cut to any length you need
FABRICATED
FABRICATED POP-UP ROOFS
Custom made fabricated pop-up roofs with acme seams for a water tight fit. Roofs can be manufactured in any color, score pattern, or embossing in our stock.
LAUAN PANELING
Lauan paneling is excellent for substrate walls, alumi-num or fiberglass siding and roofing, as well as rubber roofing.
ORDER NUMBER: W1000 4’ x 8’
19
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS & HOLDING TANKS
Water tanks and holding tanks are processed on our site using a rotational molding machine. With this form of construction, the tanks will have NO SEAMS! The materials used are NSF & FDA approved polyethele. Each water and holding tank is tested before it leaves our shop to ensure there are no leaks. If you do not see a tank in our catalog, we can manufacture custom molds. However, due to the cost of building the mold, special tanks are costly, but available.
All fittings are installed using spin welding. This technique insures that the fitting and the tank mold together creating a long lasting, water tight seal.
How to order: 1. Choose the tank by number 2. Choose the fittings 3. Fax the order form on the following page to 303-423-4051
PLASTICCOMPARTMENT
*All capacities shown are approximate.
NEW ITEMS!
CONTAINERS
20
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS BY CAPACITYTANK GALLONS LENGTH INCHES TANK NUMBER
1.1 8 1/4 10005
N/A (LID) 22 1/4 10605
3.8 10 1/2 10600
5 19 10430
5 19 10431
5 15 5/8 10435
5.7 14 1/4 10405
5.9 14 3/4 10025
6 17 10400
6 15 1/2 10465
6.2 17 1/2 10020
6.5 16 10030
6.5 12 3/4 10045
6.7 11 1/2 10063
6.7 28 9/16 10410
6.8 20 1/2 10040
7.3 18 1/2 10415
8 14 1/4 10055
8.2 15 10060
8.5 30 1/2 10076
9.4 15 3/4 10610
9.7 10 1/2 10065
9.7 15 3/4 10070
11.3 16 3/4 10090
11.3 15 3/4 10080
11.6 54 1/2 10101
11.6 21 1/4 10100
11.6 20 10085
12.6 26 10115
TANK GALLONS LENGTH INCHES TANK NUMBER
12.6 29 10095
13 31 1/2 10420
13.7 35 1/2 10120
14.3 28 3/4 10125
15 20 10128
15 33 1/2 10440
15.4 28 1/4 10143
15.5 21 1/4 10130
16.6 27 10135
16.6 53 1/2 10150
16.7 17 3/4 10148
17 22 1/2 10170
17 20 10140
17 40 3/4 10145
17.5 23 1/4 10615
17.9 22 1/4 10105
18 34 1/2 10445
18.3 21 1/4 10450
18.5 19 1/2 10165
18.9 34 1/2 10455
19.3 28 10180
19.4 34 1/2 10175
19.9 35 3/4 10190
19.9 34 10210
20.2 35 1/2 10315
20.8 50 1/2 10195
20.8 20 3/4 10205
21.2 23 3/4 10200
22 35 1/4 10215
22 35 1/4 10185
23.1 47 10220
21
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS BY CAPACITY
TANK GALLONS LENGTH INCHES TANK NUMBER
23.6 27 10230
23.9 21 10206
25.4 35 10235
26 22 1/2 10240
26.8 34 10237
26.9 42 3/4 10225
27.5 30 10250
28 31 3/4 10245
28.2 45 1/2 10280
29.5 25 3/4 10270
30.2 42 1/4 10255A
30.2 42 1/4 10255B
30.5 43 10260
30.7 23 1/2 10290
32 27 3/4 10300
32.3 34 1/2 10272
32.4 35 10295
32.5 33 10285
33 24 10311
33.8 36 1/2 10313
33.9 33 3/4 10275
34 40 10303
34.2 20 1/2 10620
34.7 35 1/4 10265
35.5 42 10304
N/A 34 10630
37.2 48 10359
37.8 42 10305
38 26 10307
38.8 35 10335
TANK GALLONS LENGTH INCHES TANK NUMBER
39 35 10343
39.8 32 1/4 10310
40.9 41 10328
41 50 10339
41.5 48 3/4 10320
41.7 44 3/4 10325
42 26 3/4 10340
42 46 10330
43 55 10338
44 23 3/4 10345
44 44 3/4 10355
44.9 39 3/4 10365
45.2 38 10358
48 40 1/4 10350
48.2 50 10372
50 44 10348
50.1 55 1/2 10360
51.4 35 1/2 10370
62.8 54 10375
64 43 10373
69.6 35 1/2 10380
70.6 33 3/4 10377
N/A 34 10640
71 36 10382
80 17 1/2 10480
86 35 3/4 10650
99 55 3/4 10385
127.6 54 10390
22
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS BY LENGTHINCHESLONG
INCHESWIDE
INCHESDEEP
TANKGALLONS
TANKNUMBER
8 30 1/2 8 8.5 10076
8 1/4 8 1/4 3/34 1 10005
10 1/2 10 1/4 10 1/4 3.8 10600
10 1/2 24 9 9.7 10065
10 3/4 11 12 3/4 6.5 10045
10 3/4 13 1/2 15 3/4 9.7 10070
11 1/2 26 1/4 5 6.7 10063
11 3/4 29 8 1/2 12.6 10095
12 15 3/4 14 11.3 10080
13 13 1/2 15 3/4 9.4 10610
13 1/2 10 20 11.6 10085
14 1/4 12 1/4 10 1/2 8 10055
14 1/4 12 1/2 12 1/2 5.7 10405
14 3/4 14 7 5.9 10025
15 11 11 3/4 8.2 10060
15 1/2 7 3/4 11 1/2 6 10465
15 5/8 13 5/8 9 1/4 5 10435
15 3/4 21 3/4 43 64 10373
16 10 1/4 9 6.5 10030
16 3/4 13 1/2 11 1/2 11.3 10090
17 7 1/2 11 1/2 6 10400
17 1/2 10 1/2 7 3/4 6.2 10020
17 1/2 48 22 80 10480
17 3/4 12 3/4 17 16.7 10148
18 1/2 9 12 1/4 7.3 10415
19 23 3/4 35 1/2 69.6 10380
19 12 7/8 8 1/2 5 10431
19 12 7/8 8 1/2 5 10430
INCHES LONG
INCHESWIDE
INCHESDEEP
TANKGALLONS
TANKNUMBER
19 1/2 17 1/2 12 3/4 18.5 10165
20 16 11 15 10128
20 15 1/2 12 3/4 17 10140
20 1/2 14 1/2 5 1/4 6.8 10040
20 1/2 19 1/4 12 34.2 10620
20 3/4 20 3/4 11 1/4 20.8 10205
21 21 12 1/2 23.9 10206
21 1/4 27 1/8 7 1/4 18.3 10450
21 1/4 18 7 11.6 10100
21 1/4 20 3/4 8 3/4 15.5 10130
21 1/2 22 1/2 7 1/2 17 10170
22 1/4 17 1/4 8 1/4 17.9 10105
22 1/4 19 1/2 N/A LID 10605
22 1/2 19 1/4 14 26 10240
23 1/4 9 1/2 N/A 17 1/2 10615
23 1/2 25 1/2 11 3/4 30.7 10290
23 44 3/4 13 3/4 44 10355
23 3/4 17 1/4 12 21.2 10200
23 3/4 23 1/2 18 44 10345
24 19 16 33 10311
25 3/4 22 12 29.5 10270
26 15 1/2 7 1/4 12.6 10115
26 24 1/4 14 38 10307
26 1/4 55 3/4 15 1/2 99 10385
26 3/4 25 14 1/2 42 10340
27 10 20 23.6 10230
27 17 1/2 8 16.6 10135
27 3/4 26 3/4 10 32 10300
28 13 3/4 11 3/4 19.3 10180
28 1/4 9 14 15.4 10143
28 3/4 15 3/4 7 1/4 14.3 10125
23
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS BY LENGTHINCHESLONG
INCHESWIDE
INCHESDEEP
TANKGALLONS
TANKNUMBER
28 9/16 11 3/4 5 1/4 6.7 10410
30 25 3/4 8 1/4 27.5 10250
31 1/2 10 3/4 12 3/4 13 10420
31 3/4 16 12 3/4 28 10245
32 1/4 21 13 3/4 39.8 10310
33 16 1/2 13 3/4 32.5 10285
33 1/2 12 1/4 14 3/4 15.3 10440
33 3/4 17 13 3/4 33.9 10275
33 3/4 26 18 1/2 70.6 10377
34 16 8 1/2 19.9 10210
34 14 13 26.8 10237
34 1/2 17 7 1/2 19.4 10175
34 1/2 18 12 32.3 10272
34 1/2 15 11 3/4 18.9 10455
34 1/2 12 3/4 11 3/4 18 10445
35 13 13 25.4 10235
35 15 1/2 13 3/4 32.4 10295
35 21 3/4 11 3/4 38.8 10335
35 22 12 39 10343
35 1/4 17 1/2 8 1/4 22 10185
35 1/4 17 1/2 8 1/4 22 10215
35 1/4 18 12 1/2 34.7 10265
35 1/2 10 9 13.7 10120
35 1/2 17 7 3/4 20.2 10315
35 1/2 25 1/2 13 51.4 10370
35 3/4 13 10 19.9 10190
36 23 7/8 19 1/4 71 10382
36 1/2 18 3/4 11 1/2 33.8 10313
38 25 11 45.2 10358
INCHESLONG
INCHESWIDE
INCHESDEEP
TANKGALLONS
TANKNUMBER
39 3/4 20 1/2 12 3/4 44.9 10365
40 14 14 34 10303
40 1/4 22 13 48 10350
40 3/4 11 9 17 10145
41 21 11 40.9 10328
42 14 14 35.5 10304
42 17 3/4 11 3/4 37.8 10305
42 1/4 17 3/4 9 1/4 30.2 10255A
42 1/4 17 3/4 9 1/4 30.2 10255B
42 3/4 17 1/2 8 1/4 26.9 10225
43 16 10 1/4 30.5 10260
44 22 12 50 10348
44 3/4 17 3/4 12 41.7 10325
45 1/2 23 6 3/4 28.2 10280
46 20 10 1/2 42 10330
47 16 7 23.1 10220
48 21 8 1/2 37.2 10359
48 3/4 12 1/2 13 41.5 10320
50 19 10 41 10339
50 20 3/4 15 1/2 48.2 10372
50 1/2 12 8 20.8 10195
53 1/2 8 9 16.7 10150
54 23 1/4 11 1/2 62.8 10375
54 23 1/2 23 1/4 127.6 10390
54 1/2 18 1/4 2 3/4 11.6 10101
55 28 6 1/2 43 10338
55 1/2 26 1/4 8 50.1 10360
N/A 18 34 37 10630
N/A 23 34 61 10640
N/A 26 1/2 35 3/4 86 10650
24
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
HOLDING TANKS
BY CAPACITY BY LENGTH
TANK GALLONS LENGTH INCHES TANK NUMBER
12 44 20045
15 29 1/2 20040
40 54 1/4 20030
15 34 1/2 20035
16 30 20020
17 23 20025
17 56 20005
17 44 20082
20 67 20055
21 55 20085
23 32 1/4 20010
26 36 20015
27 1/2 34 20095
30.5 57 20075
31 40 20080
40 55 20070
34.5 54 3/8 20090
INCHESLONG
INCHESWIDE
INCHESDEEP
TANKGALLONS
TANKNUMBER
23 22 8 3/4 17 20025
29 1/2 19 1/2 6 3/4 15 20040
30 24 1/2 6 16 20020
32 1/4 20 7 23 20010
34 22 11 27.5 20095
34 1/2 17 7 3/4 15 20035
36 23 1/2 9 1/2 26 20015
40 20 3/4 10 31 20080
44 15 1/4 5 1/4 12 20045
44 21 7 17 20082
54 1/4 26 1/2 8 1/2 40 20030
54 3/8 26 1/2 9 34.5 20090
55 20 7 1/8 21 20085
55 32 8 1/2 40 20070
56 10 8 1/2 17 20005
57 20 9 30 1/2 20075
67 11 8 20 20055
25
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
TANK FITTINGS FEATURING SEA TECH SERIES 24SEA TECH 24 SERIES QUICK CONNECTS
Sea Tech connectors utilize a swivel nut with NPS straight threads and a cone seal. This allows the installer to thread onto NPT, NPS, BSP, and most threads without tools or thread sealant. Simply thread on, hand tight, for a zero leak seal.
Sea Tech 24 Series quick connect products are produced from FDA approved materials, certified and approved to NSF-61 standards and are suitable for contact with drinking water. 24 series products are designed and manufac-tured in a bright white thermal plastic and are applicable for many applications such as water plumbing, car wash, water filtration, aquariums, and many others. 24 Series fittings are produced in standard imperial inch sizes and interconnect with all Sea Tech 35 Series Connections. Sea Tech 24 Series fittings directly connect to a variety of plastic, copper, and CPVC piping. Sea Tech connectors utilize a swivel nut with NPS straight threads and a cone seal. This allows the installer to thread onto NPT, NPS, BSP, and most threads without tools or thread sealant. Simply cut the piping and snap a Sea Tech quick connect fitting in place for a leak free connection.
Stop Valve
Union Tee
Male Elbow
Cone Seal
Elbow ClipStackable Elbow
ORDER NUMBERS: ST006- 1/2” CTS BULK ST106- 1/2” CTS CLAM
ORDER NUMBERS: ST001-3/8” CTS BULK ST102-3/8” CTS CLAM
Reducing Union
ORDER NUMBERS: ST002- 1/2” CTS BULK ST102- 1/2” CTS CLAM
ORDER NUMBERS: ST003- 1/2” CTS BULK ST103- 1/2” CTS CLAM
Stackable Tee
ORDER NUMBERS: ST004- 1/2” CTS BULK ST104- 1/2” CTS CLAM
Union Elbow
ORDER NUMBERS: ST005- 1/2” CTS BULK ST105- 1/2” CTS CLAM
ORDER NUMBERS: ST007-1/2” CTS, 1/2” NPS BULK ST107-1/2” CTS, 1/2” NPS CLAM ST008-1/2” CTS, 3/4” NPS BULK ST108-1/2” CTS, 3/4” NPS CLAM ST009-1/2” CTS, 3/4” CLOSET BULK ST109-1/2” CTS, 3/4” CLOSET CLAM ST010-1/2” CTS, 3/4” FGHT BULK ST110-1/2” CTS, 3/4” FGHT CLAM
Female Swivel Connector
ORDER NUMBERS: ST011- 1/2” NPT BULK ST111- 1/2” NPT CLAM
ORDER NUMBER: ST012- 1/2” NPS BULK ST112– 3/4” NPS & FGHT BULK
ORDER NUMBERS: ST013- 1/2” CTS BULK ST113- 1/2” CTS CLAM
Union Connector
ORDER NUMBERS: ST014- 1/2” CTS BULK
26
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
SEA TECH TANK FITTINGS & PIPING
Poly Tubing
COLOR PACKAGE
BLUE
BLUE
BLUE
1/ BLUE
RED
RED
RED
1/ RED
ST026
ST027
ST028
ST029
ST030
ST031
ST032
ST033
ST034
ST035
ST036
ST037
ST038
ST039
ST040
PIPING
Reducing Stem
Female Swivel Elbow
ORDER NUMBERS: ST015- 1/2” CTS, 1/4” O.D. BULK ST115- 1/2” CTS, 1/4” O.D. CLAM ST016- 1/2” CTS, 3/8” CTS BULK ST116- 1/2” CTS, 3/8” CTS CLAM
ORDER NUMBERS: ST017- 1/2” CTS 1/2” NPS BULK ST117- 1/2” CTS 1/2” NPS CLAM ST018- 1/2” CTS 3/4” NPS BULK ST118- 1/2” CTS 3/4” NPS CLAM ST019- 1/2” CTS 3/4” CLOSET BULK ST119- 1/2” CTS 3/4” CLOSET BULK ST020- 1/2” CTS 3/4” FGHT BULK ST120- 1/2” CTS 3/4” FGHT BULK
Male Connector
End Stop
Pipe Clip
ORDER NUMBERS: ST021- 1/2” CTS BULK ST121- 1/2” CTS CLAM
ORDER NUMBERS: ST022- 1/2” CTS BULK ST122- 1/2” CTS CLAM
ORDER NUMBERS: ST023- 1/2” CTS BULK ST123- 1/2” CTS CLAM
O-Ring Assembly
ORDER NUMBERS: ST024- 1/2” CTS BULK ST124- 1/2” CTS CLAM
ORDER NUMBERS: ST025- 1/2” CTS BULK
TUBE SIZE
1/2” CTS 5’ STRAIGHT LENGTH
1/2” CTS 10’ STRAIGHT LENGTH
1/2” CTS 20’ STRAIGHT LENGTH
1/2” CTS BLUE 50’ COIL BOX
2” CTS 250’ COIL
1/2” CTS 5’ STRAIGHT LENGTH
1/2” CTS 10’ STRAIGHT LENGTH
1/2” CTS 20’ STRAIGHT LENGTH
1/2” CTS RED 50’ COIL BOX
2” CTS 250’ COIL
1/2” CTS WHITE 5’ STRAIGHT LENGTH
1/2” CTS WHITE 10’ STRAIGHT LENGTH
1/2” CTS WHITE 20’ STRAIGHT LENGTH
1/2” CTS WHITE 50’ COIL BOX
1/2” CTS WHITE 250’ COIL
ORDER NUMBER
27
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
SPIN WELDED TANK FITTINGS
The fittings below are all spin welded into the plastic tanks per customer specifications. There are a variety of fit-tings to choose from to fit your needs. Just fill out the form with placement of the fittings and fax it back to us.
Slip Fittings i i ill sl
i l
FPT
i iavailabl
FPT Flush Fittings ii
l i
Sensor
These f ttings are des gned so that ABS or PVC w ide inside or boot clamp around the f tting. They are availab e in 1 3/8” boss, tapered to allow a hose clamp to fit over, 1 1/2”, and 3”
ORDER NUMBER: 11145-1 1/2” SLIP FITTING 11114-3” SLIP FITTING
Raised Fittings These fittings have the threads on the outside of the tank and prov de better drainage of water. F ttings are
e in 1/2”, 3/4”, 1”., 1-1/4” 1-1/2”, 2” and 3”.
These fittings are des gned to be flush to the tank, the threads are on the ins de of the tank and are ideal for shipping purposes. They are avai able n 1/2”, 3/4”, 1”., 1-1/4” 1-1/2”, 2”, and 3”.
ORDER NUMBERS: 11020—1/2” FPT RAISED FITTING 11030—3/4” FPT RAISED FITTING 10037—1” FPT RAISED FITTING 11040—1-1/4” FPT RAISED FITTING 11050—1-1/2” FPT RAISED FITTING 11060—2” FPT RAISED FITTING 10070—3” FPT RAISED FITTING
ORDER NUMBERS: 11025—1/2” FPT FLUSH FITTING 11035—3/4” FPT FLUSH FITTING —1” FPT FLUSH FITTING 11045—1-1/4” FPT FLUSH FITTING 11055—1-1/2” FPT FLUSH FITTING 11065—2” FPT FLUSH FITTING 11075-3” FPT FLUSH FITTING
These water sensors have 8/32” threads to easily connect to your computer or circuit board.
ORDER NUMBERS: 11080-8/32 THREAD S/S SENSOR
28
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
29
Customer:_____________________
Contact: ______________________
QUANTITY_______
BACK
BOTTOM
LEFTSID
E
Address:______________________
City, State, Zip_________________
Phone Number:_________________
TANK#___________
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
HOLDING TANKS
56”
10”
10 1/2”
7”
20”
36”
6” 30”
4”
22”
23”
Tank Number 20015
Tank Number 20010
Tank Number 20020
Tank Number 20005
17 Gallons
1.5” Drain 8 1/2”
23 Gallons
32 1/4”
3” Outlet
9 1/2”
23 1/2”
3” Outlet
4 3/4”
26 Gallons
24 1/2” 16 Gallons
Tank Number 20030
26 1/2”
54 1/4”
3” Outlet
8 1/2”
40 Gallons
8 3/4”
17 Gallons
Tank Number 20025
1 1/2” Outlet
30
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
HOLDING TANKS
17”
44”
67”
8”
11”
3”
55”
32”
3”
57”
9”
20”
Tank Number 20035
15 Gallons
7 3/4”
Tank Number 20055
34 1/2”
Tank Number 20045
Tank Number 20040
19 1/2”
6 3/4” 29 1/2”
15 Gallons
1 1/2” Outlet
12 Gallons 15 1/4”
37 3/4”
3” Outlet
20 Gallons
Tank Number 20070
40 Gallon
3” Outlet
Tank Number 20075
8 1/2”
30.5 Gallon
3” Outlet
31
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
HOLDING TANKS
Tank Number 20080 Tank Number 20082
31 Gallons 17 Gallons 20 3/4”
40”21”
10”7”
44”
Tank Number 20085 Tank Number 20090 21 Gallons
34.5 Gallons
26 1/2” 20”
55”
7 1/8” 9”
55 3/8”
Tank Number 20095
27.5 Gallons 22”
34”
11”
32
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
14”
7”14 3/4” 9”
16”
20 1/2”
11”
12 3/4”
10 3/4”
Tank Number 10025
5.9 Gallons
10 1/2”
7 3/4” 17 1/2”
Tank Number 10020
6.2 Gallons
10 1/4”
Tank Number 10030
6.5 Gallons
8 1/4”
3 3/4” 8 1/4”
Tank Number 10005
1 Gallon
14 1/2”
5 1/4”
Tank Number 10040
6.8 Gallons
Tank Number 10045
6.5 Gallons
33
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
5” 11 1/2”
11 3/4”
15”
11”
24”
9” 10 1/2”
8
10 3/4” 8”
8”
26 1/4”
Tank Number 10063
6.7 Gallons
Tank Number 10060
8.2 Gallons
Tank Number 10065
9.7 Gallons
Tank Number 10055
12 1/4”
10 1/2” 14 1/4”
Gallons
Tank Number 10070 Tank Number 10076
30 1/2”
8.5 Gallons 13 1/2”
15 3/4”
9.7 Gallons
34
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
11 1/2” 13 1/2”
20”
10”
8 1/2” 11 3/4”
29”
12”
54 1/2”21 1/4”
18”
7”
16 3/4”
Tank Number 10090
11.3 Gallons
13 1/2”
Tank Number 10085
11.6 Gallons
Tank Number 10095 (A & B)
12.6 Gallons
Tank Number 10080
15 3/4”
14 ”
11.3 Gallons
Tank Number 10100 Tank Number 10101
2 3/4”
18 1/4” 11.6 Gallons
11.6 Gallons
35
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
10”
9”35 1/2”
7 1/4” 26”
7 1/4” 28 3/4”
20”
16”
11” 20 3/4”
7 3/4”
Tank Number 10120
13.7 Gallons
15 1/2”
Tank Number 10115
12.6 Gallons
Tank Number 10125
15 3/4” 14.3 Gallons Baffle Tank
Tank Number 10105
17.9 Gallons Baffle Tank
Tank Number 10128 Tank Number 10130
8 3/4”
15 Gallons
17 1/4”
8 1/4” 22 1/4”
21 1/4” 15.5 Gallons
36
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
14”
9”
12 3/4” 20”
9”
40 3/4”
11”
9”17 3/4”
17”
8”27”
53 1/2”
8”
28 1/4”
Tank Number 10143
15.4 Gallons
15 1/2”
Tank Number 10140
17 Gallons
Tank Number 10145
17 Gallons
Tank Number 10135
16.6 Gallons Can be made with or
without baffles 10135A-No baffles
10135B-With baffles
Tank Number 10148 Tank Number 10150
16.7 Gallons 12 3/4”
17 1/2”
16.7 Gallons
37
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
17”
7 1/2” 34 1/2”
7 1/2” 21 1/2”
11 3/4” 28”
10” 35 3/4”
13”
12 3/4”
8 1/2”
8 1/4” 35 1/4”
17 1/2”
Tank Number 10175
22 1/2”
Tank Number 10170
17 Gallons
Tank Number 10180
13 3/4”
19.3 Gallons
Tank Number 10165
18.5 Gallons
Tank Number 10185 Tank Number 10190 A & B
19.9 Gallons
17 1/2”
19 1/2”
19.4 Gallons Baffle Tank
22 Gallons Baffle Tank
38
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
11 1/4”
20 3/4”
12”
23 3/4”
12 1/2”
21”
21”
35 1/4”
8”
12”
8 1/2”
34”
16”
20 3/4”
Tank Number 10205
17 1/4”
Tank Number 10200
21.2 Gallons
Tank Number 10206
23.9 Gallons
Tank Number 10195
20.8 Gallons
Tank Number 10210 Tank Number 10215
8 1/4”
17 1/2”
22 Gallons Baffle Tank
50 1/2”
20.8 Gallons
19.9 Gallons Pressure breaks
39
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
27”
20”
10”
13” 35”
13”
14”
22 1/2”
16”
7”
47”
13” 34”
14”
Tank Number 10230
Tank Number 10225
Tank Number 10235
25.4 Gallons
Tank Number 10220
Tank Number 10237 Tank Number 10240
19 1/4” 26 Gallons
23.1 Gallons
23.6 Gallons
26.8 Gallons
17 1/2”
8 1/4” 42 3/4”
26.9 Gallons
40
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
9 1/4” 42 1/4”
35 1/4”
18”
16”
12 3/4”
10 1/4” 43”
16”
30”
42 1/4”9 1/4”
Tank Number 10255A
Tank Number 10250
Tank Number 10255B
30.2 Gallons
Tank Number 10245
Tank Number 10260 Tank Number 10265
12 1/2”
34.7 Gallons
28 Gallons Baffle Tank
31 3/4”
30.2 Gallons Baffle Tank
30.5 Gallons
25 3/4”
8 1/4”
27.5 Gallons
17 3/4” 17 3/4”
41
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
13 3/4” 33 3/4”
23 1/2”
22”
12”
13 3/4” 33”
16 1/2”
18”
12”
17”23”
6 3/4”
Tank Number 10275
Tank Number 10272
Tank Number 10280
Tank Number 10270
Tank Number 10285 Tank Number 10290
11 3/4”
25 1/2” 30.7 Gallons
29.5 Gallons
25 3/4”
33.9 Gallons Baffle Tank
32.5 Gallons Baffle Tank
34 1/2”
32.3 Gallons
28.2 Gallons
45 1/2” 29 3/4”
15 3/4”
17 3/4”
42
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
13 3/4” 35”
14”26”
24 1/4”
10”
40”
14”
14”42”
14”
14”
42”
Tank Number 10303
Tank Number 10300
Tank Number 10304
Tank Number 10295
32.4 Gallons 15 1/2”
Tank Number 10307
38 Gallons
26 3/4”
27 3/4”
32 Gallons
34 Gallons 35.5 Gallons
Tank Number 10305
11 3/4”
17 3/4” 37.8 Gallons Baffle Tank
43
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
12” 44 3/4”
21”
13 3/4”
24
16
19
36 1/2”
11 1/2” 35 1/2”
17”
7 3/4”
13”
Tank Number 10313
Tank Number 10311
Tank Number 10315
Tank Number 10310
Tank Number 10320 Tank Number 10325
17 3/4” 41.7 Gallons
39.8 Gallons Baffle Tank
32 1/4”
41.5 Gallons
33 Gallons
33.8 Gallons Notched corner 18 3/4”
20.2 Gallons Baffle Tank
31 1/4” 17 1/2”
20 1/4”
12 1/2” 48 3/4”
44
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
26 3/4”
25”
21”
11” 41” 46
20”
35”11 3/4”
55”
28”
19”
50”10”
Tank Number 10335
Tank Number 10330
Tank Number 10338
Tank Number 10328
Tank Number 10339 Tank Number 10340
14 1/2”
42 Gallons
40.9 Gallons
41 Gallons
10 1/2”
42 Gallons
38.8 Gallons Baffle Tank
21 3/4”
43 Gallons
6 1/2”
45
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
11” 38”
25”
22”
12” 35”18”
44”
22”
12”
13”
40 1/4”22”
23
Tank Number 10348
Tank Number 10345
Tank Number 10350
Tank Number 10343
Tank Number 10355 Tank Number 10358
45.2 Gallons
39 Gallons
44 Gallons
23 3/4”
23 1/2” 44 Gallons
50 Gallons 48 Gallons 20 1/2”
13 3/4”
44 3/4”
19 1/2”
31 3/4”
46
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
43”
21 3/4”
21”
8 1/2” 48”
8”
39 3/4”12 3/4”
13”
35 1/2”
35”
50”
Tank Number 10365
Tank Number 10360
Tank Number 10370
Tank Number 10359
Tank Number 10372 Tank Number 10373
15 3/4” 64 Gallons
37.2 Gallons
55 1/2”
26 1/4”
50.1 Gallons
44.9 Gallons
20 1/2” 51.4 Gallons 25 1/2”
48.2 Gallons
13 3/4”
20 3/4”
9 1/4” 15 1/2”
47
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
23 1/2”
54”
11 1/2”
54”
26”
19”
35 1/2” 19 1/4”
36”
26 1/4”
Tank Number 10380
Tank Number 10377
Tank Number 10382
Tank Number 10375
Tank Number 10385 Tank Number 10390
23 1/4 ”
127.6 Gallons
62.8 Gallons
23 1/4”
33 3/4”
18 1/2”
70.6 Gallons
69.6 Gallons 23 3/4” 71 Gallons 23 7/8”
99 Gallons 55 3/4”
15 1/2”
48
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
17”
7 1/2”
11 1/2”
9”
14 1/4”
12 1/2”
28 9/16”
5 1/4”
11 3/4”
9 1/2”
12 1/4”
18 1/2”
9”
7 3/4”
9 1/4”
22 3/4”
2 1/4”
31 1/2”
12 3/4”
10 3/4”
6”
18 1/2”
12 7/8” 8 1/2”
19”
Tank Number 10410
Tank Number 10405
Tank Number 10415
Tank Number 10400
Tank Number 10420 Tank Number 10430
This tank is a mirror image of tank 10431
6 Gallons
7.3 Gallons
5.7 Gallons
6.7 Gallons
13 Gallons 5 Gallons
49
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
Tank Number 10431
5 Gallons
12 7/8”
8 1/2”
19”
Tank 10430 is a mirror image of this tank
Tank Number 10440
15.3 Gallons
12 1/4” 14 3/4”
12 1/4”
33 1/2”
Tank Number 10450
18.3 Gallons 27 1/8”
21 1/4”
7 1/4”
27 7/8”
Tank Number 10435
5 Gallons
13 5/8”
9 1/4”
15 5/8”
Tank Number 10445
18 Gallons
11 3/4”
12 3/4”
34 1/2”
Tank Number 10455
18.9 Gallons
34 1/2”
15”
11 3/4”
32”
50
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
Barrel Lid
15 1/2”
7 3/4”
11 1/2”
10 1/4”
10 1/2”
10 1/4”
22 1/4”
19 1/2”
23 1/4”
9 1/2”
22”
48”
17 1/2”
2 3/4”
13 1/2”
15 3/4”
13”
Tank Number 10600
Tank Number 10480
Tank Number 10605
Tank Number 10465
Tank Number 10610 Tank Number 10615
9.4 Gallons ‘r’average = 6.65 Can be made solid
or with lid
3.8 Gallons Can be made solid
or with lid
80 Gallons 6 Gallons
17 1/2 Gallons
51
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
WATER TANKS
Tank Number 10620
34.2 Gallons
19 1/4”
4-1/4”
11.0920 1/2” 22 1/2”
4-1/4”
Tank Number 10640
Barrel Outer Lining 23”
34”
Tank Number 10630
23”Barrel Inner Lining
34”
Tank Number 10650
86 Gallons
26 1/2”
35 3/4”
52
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
HOW TO ORDER ALUMINUMAll aluminum siding is custom cut to each order. It is kept in bulk 4’ wide coils which are cut to length and width, then scored and locked. All metal is custom made, therefore, it is essential we get the correct measurement. Please review the following diagrams to calculated your cut size.
………………...….D
………………….B
………………….C
………………….A
IF YOU MEASURED THEN ADD
A-B LOCK & SHRINKAGE
A-C 1/2” + LOCK + SHRINKAGE
D-C REMEASURE
D-B REMEASURE
12 inches 24 inches 36 inches 48 inches
1”
1/2”
”
Pattern Loss or “shrinkage” when rollforming (amount of loss in inches)
Score pattern
2 Mesa 1/32” 1/16” 3/32” 1/8”
2 Mesa-1 3/32” 3/16” 9/32” 3/8”
3 Mesa 1/32” 1/16” 3/32” 1/8”
3 Mesa-1 1/16” 1/8” 3/16” 1/4”
3 Mesa-1-1 3/32” 3/16” 9/32” 3/8”
3 Mesa-3 1/32” 1/16” 3/32” 1/8”
3 Mesa-3-1 Reverse 3/16” 3/8” 9/16” 3/4”
4 Mesa-1 1/16” 1/8” 3/16” 1/4”
4 Mesa-3 1/8” 1/4” 3/8” 1/2”
4 Mesa-3-1 Reverse 3/16” 3/8” 9/16” 3/4”
4 Coachmen 1/32” 1/16” 3/32” 1/8”
4 Coachmen-3 3/32” 3/16” 9/32” 3/8”
Fleetwood Mesa-1 1/16” 1/8” 3/16” 1/4”
1/2
PITTSBURGH LOCK 1/2” FLANGE
1-1/4
S-LOCK
Pittsburgh uses 1-1/2” of material S-Lock uses 2” of material 1/2” Flange uses 5/8” of material
53
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
Actual Size Score Pattern Guide
2” MESA
2” (1/32” Loss per foot)
2” MESA-1” SCORE
2”(3/32” Loss per foot)
54
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
Actual Size Score Pattern Guide
3” MESA
(1/32” Loss per foot)3”
3” MESA-1 SCORE
3” (1/16” Loss per foot)
3” MESA-1 SCORE-1 REVERSE
3”(3/32” Loss per foot)
55
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
Actual Size Score Pattern Guide
3” MESA-1 REVERSE
3”(1/16” Loss per foot)
3” MESA-3 SCORE
3”(1/16” Loss per foot)
3” MESA-3 SCORE-1 REVERSE
(1/8” Loss per foot) 3”
56
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
Actual Size Score Pattern Guide
4” MESA
4” (3/16” Loss per foot)
4” MESA-1 SCORE
(1/16” Loss per foot)4”
4” MESA-3 SCORE
4” (1/8” Loss per foot)
57
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
Actual Size Score Pattern Guide
4” MESA-3 SCORE-1 REVERSE
4” (3/16” Loss per foot)
4” COACHMAN
4”(1/32” Loss per foot)
4” COACHMAN-3 SCORE
4” )(3/32” Loss per foot
58
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
Actual Size Score Pattern Guide
FLEETWOOD MESA
3 -11/32” (1/16” Loss per foot)
FLEETWOOD MESA-1 SCORE
3 -11/32” (1/16” Loss per foot)
2’, 3”, 4” SCORE
Specify distance between score lines of 2”, 3”, or 4”.
59
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
Actual Size Score Pattern Guide
1 SCORE-1 REVERSE ON 3” CENTERS
3”(1/16” Loss per Foot)
3-1/2” SCORES-3” CENTERS
3”(1/16” Loss per Foot)
3-1/2” SCORES-1 REVERSE-3” CENTERS
3”
60
The Metal Company Phone 303-423-4425 Fax 303-423-4051 Toll Free 1-800-231-0401
Sign Metal Colors
032 WHITE 040 WHITE 063 WHITE
040 PEPSI BLUE
040 BRIGHT RED
040 BRIGHT BLUE
080 WHITE
040 PURPLE
040 IVORY
032 MILL FINISH
040 GLOSS BLACK
040 BRIGHT GREEN
080 MILL FINISH
040 MATTE BLACK
040 HUNTER RED
040 CAUTION YELLOW 040 ORANGE
65
TO 55TH GO EAST ON 55TH
The Metal Company
Arvada, Colorado 80002
Sheridan
I-70
Harlan
Lam
ar
NW. 58th/Ralston Frontage Road
LOCATED ON THE NORTH CORNER OF 55TH AND HARLAN IN ARVADA COLORADO TAKE 1-70 TO WADSWORTH,
GO NORTH ON WADSWORTH
FOLLOW 55TH DOWN TO HARLAN
5509 Harlan Street
Wadsw
orth
56th Avenue
55th Avenue