ESMA Manual
of 31
-
Upload
asghar-ali -
Category
Documents
-
view
250 -
download
0
Transcript of ESMA Manual
-
8/9/2019 ESMA Manual
1/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 1
ESMA eServices
User Manual
Ver. 1.0
Dated: 28th March 2014
Prepared By
IT Department,
Emirates Authority for Standardization & Metrology
TollFree : 600 565554
Fax: +97142944112
Email: [email protected]
URL: www.esma.ae
UAE
mailto:[email protected]:[email protected]://www.esma.ae/http://www.esma.ae/http://www.esma.ae/mailto:[email protected]
-
8/9/2019 ESMA Manual
2/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 2
Contents1 Introduction ............................................................................................................................................... 3
2. Login screen .............................................................................................................................................. 4
3. New Registration ....................................................................................................................................... 5
4.Forgot Password ........................................................................................................................................ 9
8 DOWNLOAD CERTIFICATE ........................................................................................................................ 13
9 ECAS ......................................................................................................................................................... 15
10 EQM ....................................................................................................................................................... 22
11 PRODUCT STATUS DECLARATION LETTER .............................................................................................. 24
-
8/9/2019 ESMA Manual
3/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 3
-
8/9/2019 ESMA Manual
4/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 4
1. Introduction
The purpose of this document is to know how the ESMA E-service, is used
electronically. And to pursue the business in the UAE market, complying
international ISO standards proposed by the government.
ESMA E-service will make things work very simple to get things done in easy
and more accurate way. The below document will emphasis the ESMA e-
services can be used.
-
8/9/2019 ESMA Manual
5/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 5
2. Login screen
The below page is the home page for ESMA eservices and can be accessed by the URL:https://eservices.esma.gov.ae/ecertify/Online/Login.aspx
https://eservices.esma.gov.ae/ecertify/Online/Login.aspxhttps://eservices.esma.gov.ae/ecertify/Online/Login.aspxhttps://eservices.esma.gov.ae/ecertify/Online/Login.aspx
-
8/9/2019 ESMA Manual
6/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 6
3. New Registration
New registration screen will have below preview, when new user is registering the establishment. The
following are the mandatory field
a)
Account type(Manufacturer, Trader, Retailer and others)
b)
Company English name
c)
Country
d)
City
e)
Address
f)
P. O. Box
g)
Telephone
h)
Email
i)
Trade License No & Expiry Date
-
8/9/2019 ESMA Manual
7/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 7
3. A) User informationStage 2 of user information has below mandatory field
a)
Contact title
b)
Contact name Englishc)
Contact mobile no
d)
Contact email
-
8/9/2019 ESMA Manual
8/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 8
3. B) security information
a)
The below page will have mandatory fields
b)
Username and password for login in to the ESMA eservice.
-
8/9/2019 ESMA Manual
9/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 9
3. D) Document type
a)
The below page will have mandatory document to be attached for availing features of ESMA
eservices website
b)
Document type (TRADE LICENSE & other document of establishment)
-
8/9/2019 ESMA Manual
10/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 10
-
8/9/2019 ESMA Manual
11/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 11
3. E) Submit application
Submit the application to avail the features of ESMA eservices
-
8/9/2019 ESMA Manual
12/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 12
Forgot password
Forgot password will be used at the time user missed the password of valid account, which is already
registered in the ESMA eservices. And password will be retrieved by giving registered and valid email ID.
-
8/9/2019 ESMA Manual
13/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 13
-
8/9/2019 ESMA Manual
14/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 14
Home page of ESMA E-services.
Home page of ESMA eservices shows the following features.
i) ACCOUNTS
a)
Change profile
b)
Change password
c)
Pay your applicationd)
Download certificate
ii) ECAS
iii) EQM
iv) Product Status Declaration Letter
v) GSO Authentication for Tires
The home page will be seen with the details about the transaction details with time stamp.
Account settings
Registered users can update the profile by login to the application by below page.
-
8/9/2019 ESMA Manual
15/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 15
Change password
Registered users and change the password of login page by using the below page
PAY YOUR APPLICATION
-
8/9/2019 ESMA Manual
16/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 16
This page is to process the application in ESMA eservices, and download the certificate to pursue the
business in the market. The below page is the process for the payment for the end users.
After click here to pay in the above page, the following page will appear for the end user to proceed
with payment gateway either with E-dirham or by Credit Card
The final step in the pay your application process is selecting the application which the user is willing to
proceed and confirming hereby with the amount specified. And thus the application can be paid and
certificate will be availed from ESMA eservices
-
8/9/2019 ESMA Manual
17/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 17
The below screen shows the payment details and the application category on the final step in the
payment process
DOWNLOAD CERTIFICATE
The below screen shows the Download certificate which is provided by ESMA eservices. Where the
registered users can search certificate and download by application name, contact name, submission
date from, submission date to and product category.
-
8/9/2019 ESMA Manual
18/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 18
ECAS
ECAS will show following pages with complete and incomplete application of its byproducts of New
application and Renew application (electrical products, cigarettes product evaluation, cigarettes label
evaluation, Moassel product evaluation, Moassel label evaluation, organic food products, energy drink,
plastic products, diesel, lubricant oil, retreaded tire, LPG cylinders, children toys, detergents and
perfume)
Incomplete application in ECAS
The below page shows incomplete and completed application in the ECAS.
Completed application in ECAS
-
8/9/2019 ESMA Manual
19/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 19
Work flow of ECAS
Work flow of ECAS in ESMA eservices, will be as follows
The registered user will choose any byproducts which will be introduced in the market through Entitiesand fill up all the details which is showing in the page and get valid approval and certificate from ESMA
E-services.
1)
First step is to fill up all the details in below screen
-
8/9/2019 ESMA Manual
20/31
-
8/9/2019 ESMA Manual
21/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 21
3)
Third step is to fill up all the contact information details.
4)
Fourth step will have product information and upload product info in excel sheet.
-
8/9/2019 ESMA Manual
22/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 22
The below page emphasis that product info should be uploaded on the excel sheet with same column
name, by giving detailed information on the products
-
8/9/2019 ESMA Manual
23/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 23
5)
This below page shows the third party certificate will be uploaded and document will be listed in
grid shows below the attach selected file, where document name and type will be selected andby clicking add to document list finally documents or certificate related to product will uploaded
in ECAS-New application – electrical products.
The final preview of the after selecting the document will be as shown as below.
-
8/9/2019 ESMA Manual
24/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 24
6)
Final stage of ECAS of ESMA E- Services will accept the terms and condition on the ESMA
standards.
-
8/9/2019 ESMA Manual
25/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 25
The above shall apply for each and every product on the ECAS for new application and renew
application.
EQM
ECAS will show following pages with complete and incomplete application of its byproducts of new
application and Renew application (electrical products, organic food products, plastic products, diesel,
lubricant oil, LPG cylinders, Bottled drinking water, detergents and perfume)
-
8/9/2019 ESMA Manual
26/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 26
Incomplete application in EQM
The below page shows incomplete and completed application in the EQM.
Completed application in EQM
Work flow of EQM
Work flow of EQM in ESMA eservices, will be as follows
-
8/9/2019 ESMA Manual
27/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 27
The registered user will choose any byproducts which will be introduced in the market through Entities
and fill up all the details which is showing in the page and get valid approval and certificate from ESMA
E-services.
1)
First step is to fill up all the details in below screen.
2)
Second step is to fill up all the manufacturing details in below page.
3)
Third step is to fill up all the contact information details.
-
8/9/2019 ESMA Manual
28/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 28
4)
Fourth step will have product information and upload product info in excel sheet.
-
8/9/2019 ESMA Manual
29/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 29
The below page emphasis that product info should be uploaded on the excel sheet with same column
name, by giving detailed information on the products.
5)
This below page shows the third party certificate will be uploaded and document will be listed in
grid shows below the attach selected file, where document name and type will be selected and
by clicking add to document list finally documents or certificate related to product will uploaded
in EQM-New application – electrical products.
-
8/9/2019 ESMA Manual
30/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
Page | 30
6)
Final stage of EQM of ESMA E- Services will accept the terms and condition on the ESMA
standards.
-
8/9/2019 ESMA Manual
31/31
The Contents represent Reserved Intellectual Properties of “Smart Vision”. No Parts or all of this document may be reproduced using Electronic, or Photographic, or MechanicalMeans or Manners. The Contents are intended for the designated Users of the System. And no Parts or all can be disclosed to others or any Third Party at any time.
The above shall apply for each and every product on the EQM for new application and renew
application.
Product Status Declaration Letter
The product status declaration letter page will have an option to search application by certificate no.
