ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md...
-
Upload
jesse-chambers -
Category
Documents
-
view
231 -
download
0
Transcript of ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md...
![Page 1: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/1.jpg)
ERT 243/3Computer Aided Design
For Biosystem Engineering
(CAD)Prepared By:
Siti Kamariah Md Sa’atEmail: [email protected]
Phone:012-7549710
![Page 2: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/2.jpg)
Learning Outcomes
APPLY geometric construction techniques to create engineering drawings using CAD.
CREATE completes 2-D and 3-D drawings pertaining to geometric transformations, projections and multiple views.
CREATE curve, surfaces and geometric models
![Page 3: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/3.jpg)
Assessment and Grading
PROJECT/ASSIGNMENT - 40%TEST 1 - 10%TEST 2 - 10%FINAL TEST - 40%
![Page 4: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/4.jpg)
Introduction
Engineering drawingComputer Aided Design (CAD)
DefinitionDesign ProcessContribution CAD to DesignHistoryDesign FormatSoftwareAdvantageCapabilityLimitationBasic information include in drawing
![Page 5: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/5.jpg)
An engineering drawing, a type of technical drawing, is created within the technical drawing discipline, and used to fully and clearly define requirements for engineered items.
What is engineering drawing?
![Page 6: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/6.jpg)
Why Engineering Drawing?
The main purpose of engineering drawings is to communicate to other engineers, machinists, etc.
A formal and precise way of information about the shape, size, features and precision of physical objects.
Drawing is the universal language of engineering.A picture is worth a thousand
words
![Page 7: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/7.jpg)
Why Engineering Drawing?
Giving all of the information needed to make the product and being accurate in that information is the main goal.
Engineers are very picky about their drawings and must pay attention to detail.
![Page 8: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/8.jpg)
What is Computer Aided Design (CAD) ?
Also known as Computer-aided drafting and design (CADD)
Describe the use of computer program to create design and engineering applications.
The computer process of making engineering drawings and technical documents more closely related to drafting.
![Page 9: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/9.jpg)
Computer Aided Design
Computer software
Geometric Modelling
CAD
Tools in design
process
The integration of computer software and geometric model to serve the design process
![Page 10: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/10.jpg)
Design Process Problem definition: design starts with problems
Design specification: eg. Ergonomic (one person handling), load etc
Literature work: search internally and externally (patent, field study etc)
Concept development: Development of the concept
Final concept selection: Select the final concept to develop
Detail design: Detailing the design, DFA can be applied here
Prototyping: Physical model or virtual object
Documentation: Engineering drawing and design report
![Page 11: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/11.jpg)
Contribution of CAD in design Conceptualization
Geometric modeling, manipulation and visualization
Analysis Analysis package, FEA, optimization, customized
program
Prototyping Modeling, assemblies, animation
Communication Engineering drawing, documentation
![Page 12: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/12.jpg)
History
CAD had its origins in three separate sources
The first source of CAD resulted from attempts to automate the drafting process. These developments were pioneered by the General Motors Research Laboratories in the early 1960s.
![Page 13: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/13.jpg)
History
The second source of CAD was in the testing of designs by simulation. The use of computer modeling to test products was pioneered by high-tech industries like aerospace and semiconductors.
![Page 14: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/14.jpg)
History
The third source of CAD development resulted from efforts to facilitate the flow from the design process to the manufacturing process using numerical control (NC) technologies, which enjoyed widespread use in many applications by the mid-1960s.
![Page 15: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/15.jpg)
History
1962: SKETCHPAD system developed by Ivan Sutherland, MIT (2D graphic). For the first time, designer can interact with the computer graphically, before computer used for numerical analysis
1963: modeled in 3D by T.E JohnsonEarly application: car and aerospace companies
1970s: CAD spread widely in other sectors; film, animation, typographic etc
![Page 16: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/16.jpg)
Evolution of CAD
Computer graphics
Computer aided drawing and drafting
Computer aided design
![Page 17: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/17.jpg)
Design Formats
2-D Drawings Two-dimensional Having length and width/height
dimensions View of object appear in flat form Often dimensioned and contain notes and
text describe features and details of the part, map or plan.
Identical to drawing created to manual drafting technique.
![Page 18: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/18.jpg)
Design Formats
3-D Solid Models Describe both the interior and exterior
of a part Constructed differently depending on
the software Some software allow you to produce
basic solid model using tools including solid primitive.
![Page 19: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/19.jpg)
3D Geometric Primitives
PointLine SegmentPolygonPolyhedronCurved SurfaceSolid ObjectEtc.
![Page 20: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/20.jpg)
CAD Software Product
Autodesk, Inc AutoCAD Autodesk Civil 3-D Autodesk Architectural Desktop
SolidWorks Corporation SolidWorks 3-D Design Software
Graphisoft ArchiCAD Design/Building Series
![Page 21: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/21.jpg)
![Page 22: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/22.jpg)
Advantages of CAD
Better work rather than traditional drafting methods that use rulers, squares, and compasses. For example, designs can be altered without erasing and redrawing.
CAD systems also offer “zoom” features whereby a designer can magnify certain elements of a model to facilitate inspection.
Computer models are typically three dimensional and can be rotated on any axis, enabling the designer to gain a fuller sense of the object.
CAD systems also lend themselves to modeling cutaway drawings, in which the internal shape of a part is revealed.
![Page 23: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/23.jpg)
Advantages of CADD
1. Increased accuracy
3. Easy to revise
2. Increased drawing speed
4. Availability of drawing libraries
Draftingstage
1. Built-in several analysis tools
2. Better presentation (Easy to visualize) - Pan, rotate, animate, shade, texture
Designstage
![Page 24: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/24.jpg)
CADD Capability
1. Draw
3. Dimension
2. Modify
4. Object snap
5. Layer concept
![Page 25: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/25.jpg)
Limitation of CADD(within scope of drawing creation)
Good engineering drawings must have the following
characteristics.
Parts or product information is completely given.
Information is clearly presented .
Information can be used in manufacturing of part.
Always remind yourself that
“Good drawing cannot be created by using CADD
software
alone without understanding the drawing concepts.”
![Page 26: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/26.jpg)
Apply a proper line weight and style.
Select a necessary view.
Decide the appropriate places of dimensions.
Select an appropriate section techniques (if necessary)
Limitation of CADD(within scope of drawing creation)
To create a good engineering drawings YOU MUST
do the following tasks yourself.
![Page 27: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/27.jpg)
Limitation of CADD(within scope of drawing interpretation)
Because they are frequently used technical document.
Therefore,YOU MUST prepare yourself for interpreting
(or visualizing) them when you become ENGINEER.
No CADD software can create a pictorial view from
an orthographic multiview.
![Page 28: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/28.jpg)
Projected Views: Show as many sides as needed for completeness.
Cross Sections: A view that is good for showing interior features.
Table: Lower right corner, with material information, part name, designer etc
Dimension: These are the most important and most complicated part of the drawing. There is more to it than just the numerical values!
![Page 29: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/29.jpg)
![Page 30: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/30.jpg)
![Page 31: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/31.jpg)
Dimensions tell how far it is from one point on an object to another point. The most basic type is called a Linear Dimension because it gives the straight-line distance from one point to another. There are also Radial, Diameter and Angular Dimensions.
Dimensions have four basic components: Dimension Text Dimension Line and Arrows Extension Lines Gap
![Page 32: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/32.jpg)
![Page 33: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/33.jpg)
![Page 34: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/34.jpg)
More basic information
Standard CodeLinesScaling
![Page 35: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/35.jpg)
ISO International Standards Organization
Standard Code
ANSI American National Standard InstituteUSA
JIS Japanese Industrial StandardJapan
BS British StandardUK
AS Australian StandardAustralia
Deutsches Institut für NormungDINGermany
Country Code Full name
มอก. สำ��นั�กง�นัม�ตรฐ�นัผลิ�ตภั�ณฑ์�อ�ตสำ�หกรรมThailand
![Page 36: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/36.jpg)
Basic Line Types
Types of Lines AppearanceName according
to application
Continuous thick line Visible line
Continuous thin line Dimension line
Extension line
Leader line
Dash thick line Hidden line
Chain thin line Center line
![Page 37: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/37.jpg)
Visible linesVisible lines represent features that can be seen in the
current view
Meaning of Lines
Hidden linesHidden lines represent features that can not be seen in
the current view
Center lineCenter line represents symmetry, path of motion, centers
of circles, axis of axisymmetrical parts
Dimension and Extension linesDimension and Extension lines indicate the sizes and
location of features on a drawing
![Page 38: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/38.jpg)
Example : Line conventions in engineering drawing
![Page 39: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/39.jpg)
Line Convention
Precedence of coincide lines.
Hidden line drawing.
Center line drawing.
![Page 40: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/40.jpg)
Precedence of Line
Visibleline
Visibleline
Order ofimportance
Hiddenline
Hiddenline
Centerline
Centerline
![Page 41: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/41.jpg)
Hidden Line Practice
Hidden line should join a visible line, except itextended from the visible line.
Correct
No !
Join
Leavespace
![Page 42: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/42.jpg)
Correct No !
Hidden line should join a visible line, except itextended from the visible line.
Leavespace
Leavespace
Hidden Line Practice
![Page 43: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/43.jpg)
Hidden line should intersect to form L and Tcorners.
Correct
No !
L T
Hidden Line Practice
![Page 44: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/44.jpg)
Hidden arcs should start on a center line.
Hidden Line Practice
![Page 45: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/45.jpg)
Centre Line Practice
In circular view, short dash should cross at the
intersections of center line.
For small hole, center line is presented as thin
continuous line.
Center line should not extend between views.
Leave space Leave space
![Page 46: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/46.jpg)
Leave the gap when centerline forms a
continuation with a visible or hidden line
Leavespace
Leavespace
Leavespace
Leavespace
Center line should always start and end with
long dash.
Centre Line Practice
![Page 47: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/47.jpg)
Scaling is used to depict objects on paper that are either larger or smaller than the paper. If the object is larger than the paper, then the views of
the object are scaled Down If the object is smaller than the paper, then the views of
the object are scaled Up If the object fits on the paper, then the views are
depicted at Full scale (1:1)
Scaling
![Page 48: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/48.jpg)
Drawing Sheet
•Trimmed paper of a size A0 ~ A4.
•Standard sheet size (JIS)
A4 210 x 297
A3 297 x 420
A2 420 x 594
A1 594 x 841
A0 841 x 1189
A4
A3
A2
A1
A0
(Dimensions in millimeters)
![Page 49: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/49.jpg)
Drawing space Drawingspace
Title block
d
d
c
c
cBorder lines
1. Type X (A0~A4) 2. Type Y (A4 only)
Orientation of drawing sheet
Title block
Sheet size c (mm) d (mm) A4 10 25 A3 10 25 A2 10 25 A1 20 25 A0 20 25
![Page 50: ERT 243/3 Computer Aided Design For Biosystem Engineering (CAD) Prepared By: Siti Kamariah Md Sa’at Email: sitikamariah@unimap.edu.my Phone:012-7549710.](https://reader035.fdocuments.us/reader035/viewer/2022081511/56649e615503460f94b5bcc3/html5/thumbnails/50.jpg)
The end…