Equipment 2015

PREPAIDFREIGHT

BOSTCE4435THPTilt Back Tire ChangerThe TCE 4435THP delivers 2 variable speeds for ultimate control

speedsFOR ULTIMATE CONTROL

IMCQP338VLE80 Gallon QUIET Piston CompressorIncludes a full 2 year warranty

7.5hp 3 phase

JET354550Variable Speed Floor Drill Press, 1 HP, 115-230V, 1 PH•Speeds from 400 to 5000 RPM• Large 2-1/4" quill allows greater accuracy

2 available

MTN-55921,000 Lb. Capacity Motorcycle ATV Lift

SMOOTH OPERATION

EQUIPMENTFALL 2014 / spring 2015 edition

LAU301050098

9K 4-Post Service/Storage Lifts • Adjustable internal lock ladder system for lift leveling• Lifting Capacity - 9,000 lbs. (4082 kg)• Rise Height - 73 1/4” (1680 mm)• Overall Width - 106” (2692 mm)• Overall Length - 212” (5885 mm)• Inside Columns - 95” (2413 mm)• Height of Columns - 94 1/2” (2185 mm)• Width of Runways - 20 (508 mm)• Height of Runways - 5” (127 mm)• Width between Runways - 38” (965 mm)• Length of Runways - 164” (4166 mm)• Approach Ramp Length - 36” (914 mm)• Motor - 1 HP• Voltage Single Phase - 110v or 220v

MTN5593B - Black InstalledMTN5593R - Red Installed

MTN5593BU - Black UninstalledMTN5593RU- Red Uninstalled

9K 4-Post Extended Height Service/Storage Lifts• Offers 80 underneath runway

versus standard model of 67-3/4"• Lifting Capacity - 9,000 lbs. (4082 kg)• Rise Height - 85 1/2” (2171 mm)• Overall Width - 106” (2692 mm)• Overall Length - 232” (5893 mm)• Inside Columns - 95” (2413 mm)• Height of Columns - 96 1/2” (2451 mm)• Width of Runways - 20 (508 mm)• Height of Runways - 5” (127 mm)• Width between Runways - 38” (965 mm)• Length of Runways - 188” (4775 mm)• Approach Ramp Length - 36” (914 mm)• Motor - 1 HP• Voltage Single Phase - 110v or 220v

MTN5595B - Black InstalledMTN5595R- Red Installed

MTN5595BU - Black UninstalledMTN5595RU - Red Uninstalled

4 post lifts

These professional grade 9,000 lb 4-Post lifts can be used for light-duty service applications as well as a home storage/parking lift. This lift is ALI/ETL certified meeting all ANSI national safety standards.

• Free standing or bolt-down options available• Formed runways with rail system offers smooth rolling for optional rolling jack• With adjustable internal lock ladder system for lift leveling and "Slack cable" system provides additional security• One year warranty on parts and labor• Installation/owners manual available electronically upon request• Fork Lift required for delivery & unloading and must be provided by customer/shop. Delivery service will not provide Forklift.• Delivery Included in the Continental U.S. only

*Minimum Requirements for Mountain Lift Installation: Service bay must meet minimum space requirements and be clear of all obstructions. Concrete must meet a minimum thickness of 4 inches. Compression strength minimum 3,500 psi. Mounting points must be a minimum of 8 inches away from cracks and expansion joints (refer to installation manuals for specifics). Electrical connection must be done by a licensed electrician (codes vary throughout the U.S) and is not included in cost of lift. HYDRAULIC OIL IS NOT INCLUDED.

3

freight termsSEE BACK OF BOOK

4

Mountain 2 Post 12K Automotive Lift• 12K lifting capacity - ALI Certified Lift• 3-Stage front arms lift Symmetrically• Single point mechanical lock release• Padded overhead shut off bar with rubber door guards• Premium powder coat finish• Installation/owners manual available electronically upon request• One year warranty on parts and labor• Fork Lift required for delivery & unloading and must be provided

by customer/shop. Delivery service will not provide Forklift.

Installed Units• Delivery Included in the Continental U.S. only

MTN5594R - Installed - Red

MTN5594B - Installed - Blue

UNINSTALLED Units • Delivery Included in the Continental U.S. only

MTN5594RU - Uninstalled - Red

MTN5594BU - Uninstalled - Blue

INSTALLED Units• Delivery Included in the Continental U.S. only

MTN5590 - Blue

MTN5590R - Red

Mountain 2 Post 10K Automotive Lift*• 10K lifting capacity - ALI Certified Lift• 3-Stage front arms lift both Asymmetrically and Symmetrically

within same service bay• Single point mechanical lock release• Padded overhead shut off bar with rubber door guards• Premium powder coat finish• Installation/owners manual available electronically upon request• One year warranty on parts and labor• Fork Lift required for delivery & unloading and must be provided

by customer/shop. Delivery service will not provide Forklift.

Uninstalled Units • Delivery Included in the Continental U.S. only

MTN5590U - Blue

MTN5590RU - Red

2' Column Extensions for MTN 10K 2 Post Lift• Powder coated• Kit includes new cables• Kit includes hose extension• Accommodates higher profile vehicles

MTN5590EXTU- BlueMTN5590REXTU - Red

2 lift posts


SUN6602LP

PREPAIDFREIGHT

MTN-55921,000 Lb. Capacity Motorcycle ATV Lift - Black• Precision formed platforms and scissor arms• Integrated base for stability and smooth operation• Dual foot pedal air controls easy to operate and safe• Multiple lock positions• Rear drop panel for ease of maintenance of rear wheel

Maximum raised height: 35"; lowered height: 7.25"; platform width: 24"; platform length:84"; air supply required: 85-115 PSI.

• Fork Lift required for delivery and unloading and must be provided by customer/shop. Delivery service will not provide Forklift.

• Delivery Included in the Continental U.S. only

One year warranty on parts and labor.

Motorcycle not included.

motorcycle lifting


Axle Jacks

6

OTC500920 Ton Hydraulic Service Jack• Built of the highest quality heavy gauge steel, these jacks

feature precision hydraulics for a lifetime of hard work• Low profile stance and extended height add to versatility,

they lift everything from cars to trucks to heavy dutycommercial vehicles

• Huge metal wheels and swivel casters roll effortlessly oninternal bearings

• Either the foot pedal or jack handle may be used forpumping action

• Counter-balanced, spring-assisted handle hasthree-position lock

OTC511010-Ton Air/Hydraulic Service Jack• Can also be operated manually when shop air is not available• Huge front wheels mounted in bearings provide trouble-free service life• Rugged steel frame members• Rear swivel casters make spotting the jack easy• Spring-loaded handle may be locked into

three positions, from vertical to horizontal

OTC521010-Ton Heavy-Duty Service Jack• Ergonomic handle for user comfort and easy mobility• Foot pedal for quick approach of the lifting saddle to load• Built-in tray for fasteners and tools.• CE marked – ASME/PALD tested

OTC51066-ton Capacity Air/Hydraulic Service Jack• Huge steel front wheels are mounted

in bearings for trouble-free service life• Spring-loaded handle can be locked in three positions

OTC5019A2,200 lb. Capacity Low-Lift Transmission Jack• The 8-1/4" low height is perfect for aerodynamic

trucks with low ground clearance• Special mounting adapter (No. 540231) fits popular

Eaton® Fuller® RoadRanger® transmissions used onnearly all Class 7 and 8 heavy-duty trucks. Mountingplate angle is adjusted with the turn of a wrench

• Degree of tilt: 20° back, 15° forward, 12° side to side• Swiveling pump handle permits ease of operation in

restricted working spaces. Fast-acting pump quicklyraises lifting arm.

OTC528150Adapter• Eaton® 'Lightning" adapter. Used with the No. 5019A transmission jack

OTC543284RoadRanger Transmission Adapter• RoadRanger® transmission adapter for Model series FRO-11210C to FRO-18210C that

is equipped with an integrated cooler• Used with the No. 5019A transmission jack.

OTC553516Differential Mounting Adapter• Differential mounting adapter mounts easily using existing bolt patterns• Fits the most common differentials currently in use on Category 7 and 8 Heavy Duty

Trucks, including: Eaton, Fuller, Rockwell, Meritor, Spicer, International, and Mack• For use on OTC 5019A / 5078 and Stinger 1522A Transmission Jacks

OTC5093BLong Reach Under Axle Jack• Three-stage lift capacity – 22, 38.5 and 71.5 ton• Air-driven cylinder with pressure control knob for

maximum user safety• 4-position handle: horizontal, 45 degrees, vertical,

or collapsed• 7-inch minimum height for low clearance vehicles• Complies with ASME / PALD test requirements

OTC412250 Ton Center-Hole Power Twin Ram, 3" Stroke• OTC's center-hole rams are ideal for jobs that

require a gread deal of force and a relatively shortstroke

• Compared to the force it develops, each center-holePower Twin ram is lightweight, compact, and easyto handle, permitting its use in confined quarters

• Center-hole feature permits extending jackingscrews, cables, puller screws, etc., straightthrough the ram

• For added job versatility, Power Twin rams alsofeature a basic head which allows the operator tochange from a tapped hole to a plain hole bymerely changing the head insert

• Comes with threaded ram head insert, ramattaching screws, and a ram half coupler

In capacities of 17-1/2, 30,50, and 100 tons and foroperating pressures up to 10,000 PSI; use these ramson Grip-O-Matic pullers, Push-Pullers, and shoppresses.

lifting

7

OTC1511AStinger 10-Ton Air/Hydraulic Service Jack• Bring the versatility of air assist operation to your

shop's lifting tasks• Can also be operated manually, when shop air is not available• Huge front wheels mounted in bearings provide

trouble free service life • Rugged steel frame members• Rear swivel casters make spotting

the jack easy

Spring loaded handle may be locked in three positions, from horizontal to vertical. Air pressure: 80-120 PSI; lifting range: 6-3/8" to 22"; saddle diameter: 7-3/8"; overall reach: 90"; frame height: 12-3/4"; handle length: 42".

OTC151220 Ton Stinger Floor Service Jack • The 20-ton capacity with a lifting range of 7-1/2" to 24"• Low-profile stance and the extended height add to versatility• Wheels and swivel casters feature internal bearings• The foot pedal or jack handle can be used for pumping action• Counter-balanced, spring assisted handle has

a three-position lock• Saddle diameter: 7-1/2"; overall reach: 97"; frame height:

10-1/4"; handle length: 42"; floor space: 18-1/8" to 61-3/8".

OTC529227.5 Ton Under Axle Jack• Robust design with completely sealed piston• New lever design and pneumatic release valve

allows for more precise release control, does notrequire separate valve operation step

• Four position handle includes 'stow away' position• Spring return piston• Includes two height adapters, ANSI/PALD certified

INT3598SP210 Ton Air End Lift• 10 Ton capacity achieved at

200-PSI air supply• 4" x 6" steel saddles adjust

between 36" and 50" widths• Saddle arms reversible for low

height loads• Three-way air valve for fine lifting

and lowering control• Automatic mechanical safety lock

engages at five lift heights from17-1/2" to 50"

• Two air control valve fittings – one for shop air supply and onefor a Schrader valve

• Front swivel caster and twopneumatic rear tires for easymaneuverability

• 13" Forward reach (distance fromcylinder to saddles)

• Ship weight 750 lbs

INT5444 Ton Air/Hydraulic Axle Jack• Lifts from 9-1/4" To 16-1/4"• Heat treated cylinder wall prevents scoring• Large rubber tires for easy movement• 1 piece handle• Powder coat paint• Outstanding durability and quality• Operates at 90 - 180 PSI• Easily handles full load roadside truck changes,

agricultural equipment, heavy construction, bus and military applications

lifting

8

lifting

OME2322122 Ton Air Actuated Hydraulic “Axle” Jack with Extension Screw• Material: Steel• Min. height: 9-7/8"• Max. height: 22-1/2" (with 2-1/2" adapter)• Net weight: 100 lbs

OMEHW93735A25 Ton Axle Jack with 3" Adapter• 8" Low height allows lifting from axle or suspension• Compact, powerful design quickly lifts rated capacity• Specially coated ram prevents rust and extends jack life• Air assisted ram retract• 3" adapter for added height

OMEHW93735AC25 Ton Axle Jack with 25 Ton Jack Stands• Jack has 8" low height allows lifting from

axle or suspension• Compact, powerful design of jack quickly

lifts rated capacity• Pin style jack stand column

adjusts in 1½" height intervals• Heavy duty square tubing• Jack stands sold in pairs

OME2220120 Ton Long Chassis Service Jack with Air• High speed Air TurboMotor is equipped to raise the load to the

desired height efficiently, effortlessly, and safely• Wide stance and low center of gravity provide optimum

stability under load stress• Heavy gauge, steel frame helps prevent distortion or twisting• Handle actuated release valve provides precise metered

control of lowering speeds• Convenient foot pedal designed for fast, no load lifts

OMEHW93657C4 Ton Long Chassis Service Jack with 6 Ton Jackstands• Dual piston action provides speed to contact

and power to lift• Cast lift arm for heavy loads• T handle with release knob for ease of

positioning and load control• Legs on jack stands have folded metal footing to

spread weight more evenly protecting parking lotsurfaces and significantly reducing setting while working under the vehicle

• Multi position ratchet bar on jackstands providesstrength and durability

• Set includes the HW93657 and HW93506.

OMEHW9366010 Ton Manual Service Jack• Lifting trucks, trailers, and buses

by the axle, differential, or frame• Dual piston action provides speed to contact

and power to lift• Long chassis for hard to reach points• Handle adjusts to three pumping positions• T handle with release knob for exact positioning

of a load

Sealed hydraulic unit keeps out grit, grime and moisture.Large full swivel saddle and ball bearing caster makepositioning easy. Cast lift arm for heavy loads. Made in theU.S.A. Comes with 2 year warranty.

OMEHW93660C10 Ton Hydraulic ServiceJack and Jack Stands• Lifting trucks, trailers, and buses by the axle,

differential, or frame• Dual piston action provides speed to contact

and power to lift• Long chassis for hard to reach points• Pin style column jack stands adjust in 2 inch

height intervals• Heavy duty square tubing on jack stands

OMEHW9366210 Ton Air/Manual Service JackOperates manually or with air. Patented "Speed Pak™" reduceshandle pumping. Uses standard shop air 110-175 psi pressure (140-175 psi for rated load). Made in the U.S.A.

PREPAIDFREIGHT

PREPAIDFREIGHT

9

lifting

ASTAJ22FE2A22 Ton Capacity Air Over Jack with Quick Springs• Large 8" (203mm) diameter hard rubber tires • Includes quick springs for fast ram retraction• Safety overload system prevents jack from being used

beyond its rated capacity• Meets ANSI standard for performance and safety

ESC10771Yellow Jackit 50 Ton 3 Stage Air/Hydraulic Jack• 3 Stage Jack 50T/25T/10T• Power up / power down• Handle length: 57.5"• Easy to roll jack• Air over hydraulic for smooth heavy lifting

Extremely low minimum height 5.5". Designed for lifting low buses and other low clearance vehicles. Maximum stability.

SUN662222 Ton Air / Hydraulic Jack• Narrow chassis design fits easily between tandem wheels• Release knob on top of handle operates independently

of handle locking lever• Contoured chassis base to prevent damage

when under a heavy load

SUNSX556-6P1" Drive Impact Wrench with 6" Extended Anvil with Purchase of SUN6622$000.00 FREE GOOD RETAIL VALUE!While Supplies Last

FREE

Service Jack s• 45.75" long pump handle with

release knob works independently of handle position

• Raise the saddle quickly to theload with additional foot pedal

• Load-limiting and bypass valves prevent jack from being used beyond rated capacity and over-extension of ram

• Complies with ASME PALD/2009 safety standards• 2 Year Warranty on material and workmanship

KTI63155 - 5 Ton • 5 ton capacity service jack with a lift range

from 5.75" to 22"

KTI63186 - 10 Ton • 10 ton capacity service jack with a lift range

from 6.25" to 22.5"

KTI635171.5 Ton TruckTransmission Jack• 1.5 ton capacity truck transmission jack

with lift range from 8.62" to 36.625"• Front and back swivel casters allow

for trouble-free positioning andmaneuverability

• Pump handle rotates 360 degrees for multiple work positions

• Universal saddle with tilt features• Complies with ASME PALD/2009

safety standards• 2 Year Warranty on material and workmanship

KTI635051000 Lb. 2-Stage TelescopicTransmission Jack• Capacity: 1,000 Lbs• Lifting Range: 35" to 74.2"• Speedy pump foot pedal raises telescopic rams

to load quickly• Complies with ASME PALD/2009

safety standards• 2 Year Warranty on material and workmanship

KTI6361920 Ton Shop Press• 20 ton capacity shop press made of

structural steel channel for added strength• Pump, 7.28" stroke self-retracting ram and

hose with glycerine filled gauge• Vertical throat opening between 0" to 38",

21.25" throat width• 4.25" opening between movable

bolster channels• 59.5" frame height, 25.25" width,

and 27.5" base leg length• Complies with ASME PALD/2009

safety standards• 2 Year Warranty on material

and workmanship

INT31804400 Lb Transmission Jack• Fully adjustable saddle with maximum tilt

for easier alignment• Adjustable corner brackets• Convenient side trays for small tools and parts• Safety overload bypass system to prevent

hydraulic damage• 32” handle pivots 360° around pump• Rugged industrial-grade 4” casters

AFF has the only Super Duty transmission jack with a 4,400 lb. capacity. Built “forge-tough” to handleremoval, transport and installation of transmissions, transfer cases ordifferentials on heavy-duty trucks, buses, agriculturaland construction equipment.

INT3180-SP12- Ton Heavy Duty Transmission Jack Promo• Includes INT3181 transmission adapter set FREE• Maximum tilt on saddle for easier alignment• Rugged 4" casters

Jack is a heavy 375 pounds to safely remove andlift heavy transmissions without the fear of tippingover. 2" handle pivots a full 360 degrees aroundpump. Fully adjustable saddle with maximum tiltfor easier alignment. Adjustable corner brackets.

OTC1522A2,000 lb. Capacity Low-Lift Transmission Jack• Rugged, stable unit is ideal

for handling heavy transmissions• Includes adapter plate for Eaton®

Fuller® Road Ranger® transmissions• Low profile design gets under the lowest clearance

trucks, making it ideal for clutch repair work• Pump handle rotates 360° for operator convenience• Safety overload prevents use beyond its rated capacity• Height range 6-7/8" to 35-1/4"

OTC5078Air Assisted 2,000 lb. Capacity High Lift Transmission Jack for Trucks and Buses• For shops with in-ground or above-the-floor vehicle hoists• Low height of 41-1/2" allows transmission to be rolled out from

under bus or other vehicle's frame, a clearance problem with competitor's jacks

• Metered, foot-operated air pump allows effortless lifting of the transmission into place, controlling the load precisely during removal and installation

• Operation is twice as fast as competitive jacks powered by a hand pump, and it costs less

• A dedicated adapter that fits the popular Allison 500 and 600 series automatic transmissions in included

• Safety bypass prevents damage caused by a system overload. • Covered by OTC Lifetime Marathon Warranty®.

OMEHW93690C10 Ton Air Operated End Lift with High Lift 10 Ton Stands• Lifts 10 tons at 200 psi• 2-12" pneumatic rear tires and 2-6" casters for

easier transport and positioning under load• Less maintenance with one large cylinder• Pin style column adjust in 2 inch height intervals on jack stands• Ideal for fleet, agricultural and construction maintenance

OTC1520Mobile Vehicle Lift System• System can be rolled to the vehicle anywhere in the shop or outside

on a level surface• Unique design provides lift from the tires, not the frame or axle members• Ideal for situations where limited ground clearance or a lack of clear access

complicates lifting• Single controller operates both sides of the system for a smooth,

level lift up to two full feet from the bottom of the tires to the ground• Units can double as support stands when retention pin is inserted• Covered by OTC Lifetime Marathon Warranty

Capacity: 10 TonsAir pressure: 150 psiLifting range: 0-24"Saddle width: 19-1/2" to 24-1/2" dia. rim sizesHeight: 53-1/4"Width: 41-1/2"Length: 39-1/2"

OTC159010 Ton Air Lift for Trucks and Trailers• Adjustable lifting saddles and an extra wide

stance for extra stability• 10 ton lifting capacity at 200 PSI air supply• Lifting range is 13" to 52" with a 14" reach• An automatic mechanical safety catch engages in five height

positions, it must be manually released to lower the load• Two large swivel casters and pneumatic tires make it easy

to maneuver, even on loose gravel

10

liftingEnd LiftsTransmission Jacks

PREPAIDFREIGHT

11

Engine Cranes

OTC18136,000 Lb. Capacity Heavy-Duty Mobile Floor Crane• Telescoping boom adjusts to three different lengths

for three different weight capacities• Boom swivels for vertical and lateral positioning• Equipped with two speed hydraulic pump for rapid, easy lifting• Legs extend to straddle the biggest tires• Usable reach is almost 92"

OTC18146,000 Lb. Heavy-Duty Mobile FloorCrane with Electric/Hydraulic Pump• Telescoping boom adjusts to three different lengths

for three different weight capacities• Boom swivels for vertical and lateral positioning• Equipped with electric/hydraulic pump (115V)

with remote motor control• Legs extend to straddle the biggest tires• Usable reach is almost 92"

Steering dolly for easy maneuverability also serves as floor lock.Three boom positions give capacities of4,000, 5,000, and 6,000 lb. to handle thebiggest engines, and often thetransmission right along with it!

OMEHW938063 Ton Engine Crane• Installation and removal of engines,

radiators, differentials, gas tanks, etc.• Roller bearings in wheels for ease of movement• Swivel hook for full rotation of load• Side swivel of boom for ease of

positioning load• Pry bar to remove weight from leg to

ease movement of leg extension• 3 boom extension position

OMEHW938063 Ton Engine Crane• Installation and removal of engines, radiators,

differentials, gas tanks, etc.• Roller bearings in wheels for ease of movement• Swivel hook for full rotation of load• Side swivel of boom for ease

of positioning load• Pry bar to remove weight from

leg to ease movement of leg extension

• 3 boom extension position

lifting


PREPAIDFREIGHT

PREPAIDFREIGHT

12

Engine Cranes

OTC18136,000 Lb. Capacity Heavy-Duty Mobile Floor Crane• Telescoping boom adjusts to three different lengths for three different weight capacities• Boom swivels for vertical and lateral positioning• Equipped with two speed hydraulic pump for rapid, easy lifting• Legs extend to straddle the biggest tires• Usable reach is almost 92"

OTC18146,000 Lb. Heavy-Duty Mobile Floor Crane with Electric/Hydraulic Pump• Telescoping boom adjusts to three different lengths for three different weight capacities• Boom swivels for vertical and lateral positioning• Equipped with electric/hydraulic pump (115V) with remote motor control• Legs extend to straddle the biggest tires• Usable reach is almost 92"

Steering dolly for easy maneuverability also serves as floor lock. Three boom positionsgive capacities of 4,000, 5,000, and 6,000 lb. to handle the biggest engines, and often thetransmission right along with it!

Floor Cranes• To conserve valuable floor space, crane folds into a compact package for storage• For “close-in” work, leg spread adjusts to clear vehicle’s wheels, telescoping

boom extension gives additional reach• Roller bearing mounted wheels and steering dolly provide ease of mobility• A two-speed hydraulic hand pump provides fast boom

travel; descent of boom is under precise control of operator

OTC18192200 lb. Capacity Heavy Duty Floor Crane • Includes 16-7/8" lifting chain

OTC18204400 lb. Capacity Heavy Duty FloorCrane • Includes 18-3/8" lifting chain

Floor Cranes• To conserve valuable floor space, crane folds into a compact package for storage• For “close-in” work, leg spread adjusts to clear vehicle’s wheels, telescoping

boom extension gives additional reach• Roller bearing mounted wheels and steering dolly provide ease of mobility• A two-speed hydraulic hand pump provides fast boom travel; descent of boom

is under precise control of operator



liftingfreight termsSEE BACK OF BOOK

13

OTC1812Load Leveler• Improved design over conventional spreader bars• Carriage on main support beam moved by turning lead

screw; this permits fine adjustment of the tilt angle of component being lifted

• Turn lead screw manually or with air-powered tools• Spreader bar adjustment secured with locking bolts• Maximum lifting capacity: 6,000 lbs.

Distance between hooks minimum: 30"; maximum: 46"; chain grade:80. Made in the U.S.A. and covered by the Lifetime Marathon Warranty.

BBD350BBack Buddy II• Makes brake jobs easier and more profitable• Rolls under and bolts onto heavy drum and hub

assembly, then handily rolls the assembly outand lays it over for servicing

• Angles for perfect hub alignment, eliminatingseal damage and costly fixes

• A simple change of adapters transforms the toolin seconds from inboard to outboard application

• 29" L x 48" W x 43" H; 165 lbs shipping weight

BRA7600Branick 7600 Strut Spring Compressor• Doesn't require adaptors• Heavy duty Acme thread• Multi-position hooks• Versatile mounting options• Easy to use

Since the mid-80s we have been the tool of choice.Now the new OEM approved Model 7600 handles eventough applications like the Jeep Cherokee Trailhawk,RAV4, F-150, and GM pickups/SUVs... without the needfor adaptors. The multi-position upper spring hooks areadjustable up to 4 inches, in 1 inch increments, givingthe Model 7600 the flexibility to fit difficult coil springconfigurations while its long handles provide extratorque to make compression easier. With a structuralring guard, better top nut clearance, and a longercompression stroke this is the best spring compressoron the market. Whether long, short, narrow, or angled,the 7600 will get it done. Made in the U.S.A. atBranick's manufacturing facility in Fargo, ND.

ESC90538Agricultural Wheel Dolly• Easy mounting, demounting and handling of large

wheels on agricultural and earth moving machinery• Double acting hydraulic system• Hands free switch between lifting and lowering action

- safe and controlled lowering• Heavy duty construction• Capable of handling large wheels from 45.3" up to 84.7"

in diameter and up to 41.3" in depth

Top point wheel connection rod keeps the wheel in safe balance. Capacity: 3,306 lbs. Large 6" wheels for easy maneuverability.

OTC5090Back Buddy™ II• Fast-motion ratcheting jack with 14" of vertical lift• Tilting mechanism to achieve the exact angle

necessary for precise reassembly• Fold down handle for open access to the work area• Pneumatic rear tires smoothly roll across

any shop floor• Onboard lube tray and toolbox

lifting

AMG14100AMG3400AMG420AMG615AMG72AAMG13070AMG602AMG430

14

JET354402JET J-2550 20" Floor Model Drill Press• Cast Iron head • Large quill• Head casting features a permanently lubricated ball bearing

spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life

• Massive T-slotted production work table (Model J-2550 only)• Table tilts 45 degrees

JET354550JET J-A5816 15" Variable Speed FloorDrill Press, 1 HP, 115-230V, 1 PH• Speeds from 400 to 5000 RPM• Handwheel adjustment sets the speeds• Large 2-1/4" quill allows greater accuracy• 3" column diameter for maximum head support

MLW4210-1Electromagnetic Drill Press• Powerful 12.5-amp motor: Engineered for the

toughest applications, delivering 350 RPM• Dual-Mount Gearwrench Case/Reverse Mount:

Permits tight quarter drilling• 3/4” Capacity: Taps up to 1-inch-14 threaded holes• Maximum force: Develops up to 1670 pounds of drill

point pressure with a 1-inch steel plate• Solid state electronic switching: Offers faster,

smoother and quieter switching for a longer product lifespan

MLW4204-1Electromagnetic Drill Press• Powerful 7.2-amp motor: Engineered for the toughest

applications, delivering 600 RPM• Dual-Mount Gearwrench Case/Reverse Mount:

Permits tight quarter drilling• ½” Capacity: Taps up to 5/8-inch/18 threaded holes

(5/8-11 and ½-13 taps are not recommended.)• Maximum force: Develops up to 1650 pounds of drill

point pressure with a 1-inch steel plate• Solid state electronic switching: Offers faster,

smoother and quieter switching for a longer product lifespan

15

1 Ton Electric Chain Hoist• Single-phase, 115/230 voltage (AC),

16.0 amps at low voltage• 1 ton rated load, 16 ft./min. lifting speed• Built-in, multiple-disc, magnetic brake provides

positive load holding and spotting• Adjustable upper and lower limit switches

for maximum flexibility in regulating load travel

All Milwaukee Professional Electric Chain Hoistsoffer an array of load lift and height options. With1/2 to 2 Ton capacities and 10 ft. to 20 ft. liftingheights, you can order a Milwaukee Electric ChainHoist to meet your roughest needs. All offer amulti-disc magnetic brake for positive loadholding and spotting. Adjustable upper and lowerlimit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operationpower requirements. The 24-volt pushbuttonstation fits easily in your hand to allow thumb,trigger or two-handed operation.

MLW9565 10 Foot Lift HeightMLW9567 15 Foot Lift Height

ESC1031255 Ton Air Hydraulic Aluminum Jack• 55 Ton capacity, 6" stroke• Unit has a collapsed height of 10.5", extended

height of 16.5"• Lightweight only 29 lbs.• Uses any 10,000 PSI pump• Excellent for off highway tire work and is the

preferred jack for road service

AMN13000100 Ton Aluminum Jack• Lightweight aluminum for easily handling

and placing under the vehicle• Includes “Shut-Off Valve” which allows the

pump to be removed while ram is extended• Stroke: 6”• Retracted Height: 11.75” (30 cm).

Max. Height: 17.75” (45 cm)

ESC10300100 Ton Aluminum Ram• 100 ton capacity• Lightweight• For use with 10,000 psi pump• Jack 6" stroke• Durable

100 Tons of lifting power yet lightweight anddurable. Unit has a shut off valve allowing thetechnician to disconect the hydraulic hose and useanother piece of equipment on the same pump.Min Height: 11-3/4"Max Height: 17-3/4"

OTC414060-Ton Single Acting Ram• Ideal for push/pull applications found in

off-highway construction mining and otherindustries where heavy equipment is maintained

• Center hole permits extending screws, cables,etc., straight through the ram for versatility of application

• Chrome-plated piston rods resist wear andsuperior packing and seals provide high cycle lifewithout leakage

• 60-Ton capacity 6 inch stroke and a 2-1/8 inchcenter hole diameter

• Product Dimensions: 9.8 x 16.3 x14.5 inches• Shipping weight: 96.75 lbs.

ALUMINUM JACKS AND RAMS

JET180120Volt 1 Ton 20' ElectricHoist Lift - 1PH/3PH 230V• Full-Range Speed Control - patented

technology allows for smooth, seamless,continuous speed changes allowing forcomplete control throughout the lift

• True variable-speed control allows you to lift and lower faster when you need the speed, but be able to slow down the speed when you need the control

• H4 Duty Rating means the VOLT is engineered for demanding, industrial environments and the toughest applications

• Overload Protection - Standard across the VOLTline, Overload Protection prevents the operatorfrom being able to lift more than the ratedcapacity of the hoist, protecting both the userand the equipment

• Electromagnetic Brake - The heavy-duty, electromagnetic brake is designed for durabilityand longer life. This brake design is anindustry-proven safety feature that secures theload even if power is interrupted to the hoist.

lifting

16

OTC5018ATruck Clutch and Flywheel Handler• Handles 14" and 15-1/2" clutch assemblies

weighing up to 250 lbs• 360º swivel head• Open stance with swivel casters• Eliminates any lifting of the clutch• Enables technician to pivot clutch to any position

for removal and installation

OTC1735BHeavy-Duty Motor-Rotor® Repair Stand, 2000 Lb. Capacity• Handles a wide variety of engines, transmissions, torque converters,

and rear axles from trucks, tractors, and construction machinery• The 50:1 ratio gearbox allows full rotation of mounted unit with just a

turn of the crank and locks in position. Easily maneuvered when loaded• To ensure engine stability in all positions, this repair stand is equipped

with a positive-crank handle locking mechanism• Twin-post design, featuring laterally adjustable, 3-position outboard

support; provides an extremely stable work-holding unit• 2,000 lb. Capacity Heavy-Duty Motor-Rotor® Repair Stand• Covered by OTC Lifetime Marathon Warranty®OTC1585A

Power Train Lift with Tilting Plate• Compact design and swivel casters

for easy maneuverability• Includes the tilting plate• Height range is 29-1/2" to 68-1/2"• Table size: 20-1/2" x 30-1/2"• Supports up to 1,250 lbs.

OTC15952,500 lb. Capacity Power Train Lift • Powered by a quiet, 110 volt electric/hydraulic pump• Smooth, sturdy lifting and lowering motion controlled

by hand-held remote• Two patent pending independent adjusting screws tilt

the table + or - 15 degrees side to side, or fore and aft,and ensure maximum stability of the table in any position

• Large casters accommodate heavy loads• A 30 ft. long retractable extension cord reel

is mounted to frame

OTC52144-Ton Capacity Fork Lift Jack• 8,000 lb capacity (4 tons) with a low starting height of 2-5/32"• 10,000 lb capacity (5 tons) when lifting from cylinder saddle–ideal

for agriculture and industrial applications• Unique shape of primary saddle allows for handling of

all lift truck configurations with flat or edged surfaces.• Features include high-quality seals, chrome- plated internal

components, and high-strength steel construction• Complies with ASME-PALD.• Secondary lifting surface feature• Stable base

OTC4241Kingpin and Brake Anchor Pin Pusher without Hydraulics

OTC4240Kingpin and Brake Anchor Pin Pusher Set with Hydraulics• Five special collars and two pins allow this unit to work

on both straight and tapered kingpins andaccommodates sizes from 7/8" to 2" in diameter andup to 11-1/4" long

• Tool delivers 30 tons of hydraulic force to push outeven the most corroded kingpins

• The anchor pin can be removed quickly by using thespecial adapter installed in the pusher's base block andthe unit positioned over the brake's spider

• Works on many models of trucks and buses• 27-1/2" high X 8-1/2" wide; 30 ton capacity

With this pin remover, hydraulic force and precisiontooling replace torch-and-hammer methods for gettingthe job done quickly and easily. Set includes No. 4002hydraulic hand pump, No. 9767 hose, No. 9798 hose-halfcoupler, No. 4121 Power Twin 30-ton ram, and No. 29424anchor pin adapter.

lifting


17

OMEHW937663/4 Ton Wheel Dolly• For handling of dual wheels

and large single wheels• Handles up to 52” diameter tires and wheels• 2 swivel ball bearing casters for easy

positioning• Wide frame and lifting carriage• Carriage arm rollers with

self-lubricating bearings

OTC1750A6,000 lb Capacity Revolver®

Diesel Engine Stand with Adapter Assembly• 96:1 ratio worm and gear set rotates components a full 360 degrees• Crank handle can be locked in any position• Integral 12 ton jack raises the work to provide the swing radius

needed clearance• Includes universal engine adapter assembly• Two front wheels and two rear casters provide mobility

OTC1770A1500 lb. Capacity Truck Dual Wheel Dolly• Remove, transport, and replace dual wheel

and tire assemblies without strain or struggle• 1,500 lb. capacity and 3-1/2" swivel casters

provide easy maneuverability• Hydraulic jack provides 0 to 5" of lift and tilts wheel

assembly 4 degrees to prevent damage to wheel seal• Floor space is 45" by 41"• Includes a 6' support chain to hold load in place

The OTC1770A Dual Wheel Dolly allows one man toremove, transport, and replace dual wheel and tireassemblies without strain or struggle. A must for truck andtrailer shops. Meets ANSI Pald specifications.

OTC1591A10 Ton Capacity Combination Air Lift and Support Stand• Commonly used in pairs, these

air-operated units are perfect for heavy-duty lifting jobs

• Remote actuating valve and an 8 ft. air hose give you control from a distance

• Can be used as a support stand, as well as a lift, thanks to an innovative internal design

• Wide range of height adjustment and durable, free-rollingwheels make the jack easy to maneuver and positionwhere it’s needed

• Capacity of 10 tons at 200 PSI air

The minimum height (unpinned, no extension) is 19-1/2" andmaximum height (pinned in top hole, with extension) is 49-1/4"with a 10-7/8" stroke.

OTC61405Engine Stand Cumins Adapter Plate• For 1750A and 1750 diesel engine stands• For Cummins L-10 and M11 series

engines. Plate attaches to the left side ofngine for complete teardown

• Mounting plate includes all the necessaryhardware and an engine application chart.NOTE: No. 205061 Universal Adapter PlateAssembly is required for use with all plates

OTC6592StrutTamer™ Extreme with Stand• Extreme duty design to handle

the heavier springs found onmid- and some full-size truckstrut assemblies

• New frame includes cross bracing at arm mount locations- standard, this eliminatesframe flex when compressing heavier springs

• 2:1 reduction gearbox -standard, allows for a 2:1torque compression increasewhen compressing struts

• Lock rings to hold arms inposition - standard, thiseliminates arms from spreadingor sliding when compressingoffset or unique strutconfigurations

• Four-point locking jaws securelyhold the spring in place

OTC526920-ton Wide Truck Ramps• Application: Wider Front Wheels

(cement, dump, garbage trucks)• Long, 33" retractable T-handle

enhances mobility.• Non-skid rubber matting prevents

slippage during use.• Durable, heavy-duty rubber wheels.• Capacity per pair: 20 tons; overall length:

51"; tread width: 16"• Covered by OTC Lifetime Marathon Warranty®.

lifting


PREPAIDFREIGHT

18

AMM4000EModel 4000E Digital Brake Lathe• Custom Digital Finishes: by digitally

controlling the feed rates, it’s easier to find that sweet spot for your particular application that gives you the highest possible quality finish available

• Shift On the Fly 3 Speed: integrated synchronous gearbox and shifter,choose the speed that makes the most sense for your workplace

• Forged alloy steel arbor; two tapered mounting surfaces add stability and handle up to 200 lbs.

• Feed slide protection: keeps travel surfaces free of dirt and chips• All Ammco brake lathes are precision tools that cut to one-thousandth

of an inch tolerances

Purchase of Adapter Kit Mandatory!

AMM4000BSPCombination Single Speed Lathe for Brake Drumsand Rotors• One cut finishes• Positive rake tool bits• Forged alloy steel arbor• Patented floating spindle design• Patented positive oiling system

Note: Ammco Coats Warranty Does NotApply in Puerto Rico and Guam

*Leasing Availablewith Approved Lease

FREEAMM900002 & AMM2500with purchase of AMM4000BSP$2,109.99 Combined Retail Value! FREE Goods Subject to Change Good While Supplies Last

FREEAMM900006 & AMM2500with purchase of AMM4000E$3,676.13 Combined Retail Value! FREE Goods Subject to Change Good While Supplies Last

Silencer Bands For RotorsAMM6920Ventilated Rotor Silencer Band Easily wraps around ventilated rotors to dampen machining vibrations

AMM940410Carbide Bits-Positive Rake (10 Pack)• FMC/John Bean/Barret

For AMMCO LathesAMM6914-10Negative Rake Carbide Insert (10 Pack)(For models 1000, 2002, 3000, 4000, 4100, 7000, 7700)

AMM6918-6Positive Rake Carbide Insert (6 pack)

All B Lathes Require One of the Following AdapterKits for Use (Drop Ship Only)

Non-Vented Rotor Silencer Band (2 Pk)AMM69216.500 (165.10MM) diameter; for use on thin solid rotors

AMM69229.250 (234.95MM) diameter; for use on thin solid rotors

Silencer Band For DrumsAMM5280 1-3/4” Drum Silencer BandExtra long, premium grade rubber silencer band for automotive drums

AMM1175Clamp-on Silencer

AMM9183Non Asbestos Replacement Pressure Pad (2 Pack)

AMMCOBrand Quality for Other Brands of Brake Lathes

Lathe Accessories

brake lathes

*Leasing Availablewith Approved Lease

AMM940435Carbide Bits-Positive Rake (10 Pack) • Accuturn

AMM940415Carbide Bits-Positive Rake (10 Pack) • Kwikway

AMM900003Adapter Kit “C”, Passenger Car & Lt. Trk. Thru 1 Ton, 1” i.d. • Includes: 909232, 903125, 909492, 909310,

909313, 909233

AMM900002 Adapter Kit “B”, Passenger Car & Lt. Trk. Thru 1/2 Ton, 1” i.d.• Includes: 909232, 903125, 909492, 909310

AMM900001Adapter Kit “A”,Passenger Car, 1” i.d.• Includes: 909232, 903125, 909492, 909311

PREPAIDFREIGHT

PREPAIDFREIGHT

19

AccessoriesAMM2510Bench Kit (Backless) for all Ammco Lathes

AMM2500Bench Kit for all Ammco Lathes• Drop Ship Only

BOSOCL8850On-Car Brake Lathe• The OCL quickly turns and resurfaces

rotors without disassembling orremoving components of a vehicle’sbraking system

• Bosch’s caliper-mounted unit eliminates run-out

• Standard adapters to fit most vehicles,eliminating the need for additionalinvestment in vehicle-specific adapter

• Two-speed lathe setting for initial and smoothing grinds

• Bi-directional lathe feed, eliminating the need to “flip” the lathe

ON-CARLATHE

CALIPER - MOUNTEDEliminates Run-Out

brake lathes

speedsFOR ULTIMATE CONTROL

BOSTCE4435THPTilt Back Tire Changer• The TCE 4435THP delivers 2 variable

speeds for ultimate control• TCE 4435 THP is the result of a

comprehensive technical studyproducing the most stable and longlasting design in the equipment history

• Its bead breaker is 40% faster thanprevious versions

• Pedal controlled 2 speedturntable (7 rpm and 15rpm) allows for exacttorque as needed

• MASSIVE 5-1/2" x 5-1/2"tilt tower maximizesrobustness and rigidity of themost stressed component of a tire changer

2 available

BOSF00E900832Easy Combo Wheel Balancerand Tire Changer Package• Low investment cost for low tire volume shop• Model WBE4100 manual entry wheel balancer, made

in Italy, with standard 3-cone set and quick nut• Model WBE4100 features multiple balancing programs

and weight placement options• Model TC220S swing arm tire changer designed for

simple and intuitive operation• Includes set-up and training by Bosch

factory representative

Ask your salesmanfor leasing options

PREPAIDFREIGHT

20

AMM1100ACoats® 1100 Series Wheel Balancer• Direct drive motor with 40MM shaft• Static-On-Screen®

• Behind the spoke tape weight placement• Dual operator mode

AMM1150-2DA1100 Series Wheel Balancer• Automatic measurement 2 of 3 parameters• Easy behind the spoke weight placement helps

maintain a “clean” look on custom wheels• Direct TAW placement• Easy to use control panel

AMMV2003DAVero V200 Series Wheel Balancer • High volume, direct drive wheel balancer• Industrial Touchscreen• Integrated laser guided weight placement• ProBalance technology• Enhanced residual static minimization

Note: Ammco Coats Warranty Does Not Applyin Puerto Rico and Guam

AMM775Model 775 Discover Coats®

Light Duty Wheel Balancer• Integrated LED Matrix Display: easy-to-read visual cues and keypad promote proper

balancing techniques and faster bay turnaround times• 10 Balancing Modes: multiple static, dynamic, and alloy modes• Self-Calibrating: provides balancing accuracy within 1/100 of an ounce• Space Saving Design: put your balancing station virtually anywhere• 40 mm Shaft: uses all standard Coats accessories


wheel changers

PREPAIDFREIGHT

21

BRA5120Tire Spreader• The Model 5120 is typically used for

both passenger and light truck tireswhen you need a little more from a spreader

• It is air powered, easy on theoperator and your bottom line

• It comes with a convenient tool tray that can be mounted on either side of the spreader

• The stable 4-point base can bebolted to the floor and there's a footcontrol valve for spreading the tire,which also gives you a stable work surface

• There is an easy spring-loadedadjustment and the high-impactindustrial light is mounted on aflexible arm making it easier forinspection and repair

• It uses a CFL bulb that is RMAcompliant, meaning our bulbs emit a minimum of 200 foot candles,which the RMA requires for propertire repairs

• Made in the U.S.A. at Branick'smanufacturing facility in Fargo, ND!

BRALR-EFTire Spreader with Lift• The Model LR-EF is typically used for both passenger and truck tires• This spreader is air-powered and has an easy to use tire lift• It's affordable and a simple solution for truck tires• The high-impact industrial light is mounted on a flexible arm making it easier for

inspection and repair• It uses a CFL bulb that is RMA compliant, meaning our bulbs emit a minimum of

200 foot candles, which the RMA requires for proper tire repairs• Made in the U.S.A. at Branick's manufacturing facility in Fargo, ND!

tire changers

AMN73100

AMN73200

22

AMMCHD-9551Coats® Heavy-Duty Tire Changer• Offers the most automated features and widest range of

fittings in the CHD line• Remote-controlled rotating tool head/arm for the fastest,

easiest tool changes in the business• Optional wireless remote gives you freedom to move around the

machine without cumbersome cables• Handles rims from 14" to 46" (up to 56" with clamp extensions)

and tires up to 95" in diameter and 51" wide.• Wheel Handled: Budd & Dayton, Tube & Tubeless Mount /

Demount: Hook & Roller on Reversible Mount• Max Overall Dimension: 112”(w)x81”(d)x75”(h)• Max Wheel Weight (lbs.): 3960

AMMHIT5000H.D. Tire Changer• Easy-to-use swing-arm houses all hydraulic controls with

a dedicated lever for each powered function• Self-centering hydraulic clamping chuck• Adjustable pressure regulator ensures proper matching

of chuck pressure to rim strength• Heavy, tapered roller bearings and a dual-direction hydraulic

motor provide smooth torque• Roller-type tire spreader standard• Max Tire Diameter: 76" (1930mm)• Max Tire Width: 25"+ (635mm+)• Min / Max Rim Diameter: 15"-38"• Electric Specifications: 220v / 1ph or 220v / 3ph, 60Hz• Air Required: No• Max Chuck Torque: 2900 ft-lbs• Max Overall Dimensions: 96" W x 108" D x 66" H

Rim Clamp Tire Changers• Clamps wheels externally up to 21”• Powerful 1.5 horsepower motor• Bead loosener - three support blocks and

sculpted blade provide wheel protection and ensures contact with tire beads at the proper angle

• Coats X-Shaped Tabletop holds wheelsfirmly in place during operation

AMM5040Awith Air Drive MotorAMM5040Ewith Electric Drive Motor

APX90A Rim Clamp Tire Changers• X shaped high torque electric turntable with external clamping range

capacity of 9in. - 30, gives you the power you need for tough applications• Coats exclusive new three position bead loosener for eliminating wheel

damage and increasing productivity• Ergonomically positioned foot pedals and helper controls located at the

point of actuation minimizes training and opportunities for error

AMMAPX90EAPX90E Rim Clamp TireChanger with Electric Drive

AMMAPX90AAPX90A Rim Clamp Tire Changer with Air Drive


tire changersfreight termsSEE BACK OF BOOK

PREPAIDFREIGHT

PREPAIDFREIGHT

LIN3665LIN3667LIN3669

24

Amerequip presses are made In the USA. The frames are welded for stability. The 10,000 PSI pump easily operates 2"diameter ram with both a high volume and high pressure operation. This presscan be operated by air for quick and smooth operation. The press plates andbed pins are zinc coated for durability. A bed winch is included for easy workspace adjustment.

• All-welded frame construction with sliding head for multiple work positions• 10,000 PSI pump easily produces maximum load rating• Pump includes overload valve so press cannot be used beyond rated capacity• Glycerine filled hydraulic gauge protects against shock load and measures US

and metric tons of force applied to component(s) being pressed

AMQ21202525 Ton Manual Shop Press• Dual pump piston pump for high volume or high pressure• All-welded frame construction with sliding head for multiple work positions

AMQ21205050 Ton Manual Pump Shop Press• Two Pump pistons allow for high volume or high pressure operation

AMQ212100100 Ton Air/Hydraulic Shop Press with Air Assist• Air motor for quick, smooth operation

AMQ21212525 Ton Manual Pump Shop Press with Air Assist

MLK60942036 Piece Universal Press and Pull Sleeve Kit• Includes: 20 sleeves (74 to 112mm inside

diameter in 2mm increments), 4 step discs to match sleeve sizes, 1 spindle TR20 shortand 1 long with inside adapter thread (M10,M12 and M14), 2 adapters for step discs, 2 nuts (M10, M12, M14 and M16 withbearing), Counter nuts (M10, M12 and M14)and Spindle Grease.

OMEHW93300C25 Ton Press withAccessory Kit• Excellent for bending, bonding

or straightening applications• Multi-position bed for

work height adjustment• Heavy steel welded construction• Includes hand winch for easy

bed adjustments• Includes 25 ton press accessory

kit and arbor plates

OMEHW9340155 Ton Shop Presswith PA2000 Air Pump• Excellent for bending, bonding,

or straightening applications• Multi-position bed for work

height adjustment• Heavy gauge, welded steel construction• Includes hand winch for easy

bed adjustments• Industrial grade rams and

hydraulic pumps

The Hein-Werner HW93401 is an AmericanMade 55 ton shop press with a powerfulair motor. It is made from heavy gaugesteel with all welded construction for yearsof dependable service in even the highestvolume applications.

shop presses

PREPAIDFREIGHT

PREPAIDFREIGHT


25

ASTTS2220 Ton Capacity Hydraulic Press• Heavy duty return springs for fast ram retraction• Reinforced head plate• Arbor plates included• Safety bypass valve assures unit will not exceed

rated capacity

Overall height: 59-3/8"; base width: 26-3/8"; hydraulic stroke: 5-3/4"; press bed width: 22-1/2" x 4. Meets ANSI standard for performance and safety.

INT850SD20 Ton Super DutyShop Press• Ideal for heavy duty truck applications,

spring shops, industrial, or every dayshops that find themselves in need of astep up from a regular duty press

• A movable press head assembly andincluded V-blocks add versatility tothese work horses

• These come complete with footoperated air motor assist pin, pressadapter kit and mountable/removableretracting guard for added safety

• Overall Dimensions: 35 in. W x 64 in. HBed Depth: 7 in. Bed Width: 19.25 in.Throat Depth: 5.75 in. Throat Width:10.75 in.

SUN525050 Ton Capacity Manual Shop Press• US built welded press frame to prevent excessive flexing under

maximum load• Reinforced head bolster for added strength• Dual piston pump provides quicker extension of ram to the work load

and easier pumping under load• Pump includes overload value to prevent against overloading• Winch with non-slip safety clutch and steel cable rollers for easy

raising and lowering of press bed• 4" diameter gauge reads US tons and corresponding metric tons.

Heavy duty springs for fast ram retraction. Bed plates, bearing punchand bearing shield included as standard equipment. Table range from1.5" to 34"; Height: 74". Made in the USA.

Drop Ship Only

SUN5250EP50 Ton Capacity Electric ProductionPress with Winch• US built welded press frame to prevent

excessive flexing under maximum load• Reinforced head bolster for added

strength• 2HP Emerson electric motor, 100 volt• Two speed pump with remote pendant

control• Winch with non-slip safety clutch and

steel cable rollers for easy raising andlowering of press bed

4" diameter gauge reads internal workingpressure and force in tons. Heavy dutyinternal springs for fast ram retraction. Bedplates, bearing punch and bearing shieldincluded as standard equipment. Table rangefrom 1.5" to 34"; Height: 74". Made in the USA.

Drop Ship Only

SUN5240AO40 Ton Capacity Air Over Shop Press• All welded construction• 4" chrome ram with 6.75" stroke • Air power for greater speed • Manual high pressure pump • Table range from 1" to 40"

Bed plates, bearing punch and bearingshield included as standard equipment.Height: 76.25"; base width: 32";stroke: 6.75"; pin diameter: 1.25";weight: 478 lbs. Made in the U.S.A.

shop presses

26

OTC182517-1/2 Ton Open Throat with Hand Pump Floor Press• Head is movable from side-to-side for full

off-center load pressing.• Ram-to-work distance is adjusted by a forcing screw

that's extended or retracted with a speed crank.• "Open Throat" feature is great for bulky jobs, and

allows ram to be mounted outside press frame.• 17 1/2-ton "Open Throat" press with 201832 ram with

2" stroke, 4002 hydraulic hand pump, 9650 gauge,9767 hose (1/4" I.D. X 6'), 32118 adjusting screw,24814 speed crank, 28228 ram cap, and 42733-WH2pump mounting bracket.

OTC182625-Ton Capacity Heavy-Duty "OpenThroat" Press withHydraulic Hand Pump• "Open throat" feature enables ram to be

positioned outside of press frame forfast axle bearing removal andinstallation, as well as other tasks

• Press bed is raised or lowered with ahand crank, and a spring-returnhydraulic ram is laterally adjustable foroff-center work at full capacity

Includes 25-ton press. No. 4016 hydraulichand pump; No. 52025 hydraulic ram with14" stroke; No. 9652 gauge; No. 303563hose (3/8" ID x 8'); and pump mountingbracket. Rugged press is covered by OTCLifetime Marathon Warranty®

OTC183425 Ton Capacity Shop Press• Tough, economical press is ideal for pressing rear

axle bearings, piston pins, and much more• Large 30" x 46" work area under ram makes

positioning of even bulky work easy• Press bed is easily raised and lowered by a

dependable lifting mechanism• Press complete with air-driven No. 4020 hydraulic

pump; No. 9652 gauge; No. 21815 tee; No. 9768hose and hydraulic ram with 6-1/4" stroke

OTC184555-Ton Capacity HeavyDuty Press with Electric/Hydraulic Pump• Covered by OTC Lifetime

Marathon Warranty®.• Hydraulic ram features 13"

of stroke. • Includes single-acting ram No.

52380 with 13" stroke; No. 4044electric/hydraulic pump; No. 9651gauge; No. 303563 hose (3/8" ID x 8'); and pump mounting bracket.

OTC185055-Ton Capacity Economy Shop Press• Durable steel frame resists buckling and bending• Hand-operated winch and cable mechanism adjusts lower press bolster• Includes hydraulic ram with 6-1/4" stroke• Also includes; hydraulic hand pump, gauge, hose, and pump mounting bracket• Covered by OTC Lifetime Marathon Warranty

shop pressesfreight termsSEE BACK OF BOOK

27

OTC185155 Ton Capacity Economy Shop Press• Durable steel frame resists buckling and bending. Covered by OTC lifetime

Marathonm Waarranty ®• Hand-operated winch and cable mechanism adjusts lower press bolster• Air/hydraulic pump (4020)

OTC1854100-Ton Capacity Economy Shop Press with Electric/Hydraulic Pump• Hand-operated winch and cable mechanism gives operator

precise control in adjustment of lower press bolster to any height• Includes hydraulic ram with 10" stroke• Includes electric/hydraulic pump, gauge, hose, and pump

mounting bracket• Covered by OTC Lifetime Marathon Warranty

Large 35" opening between press uprights allows easy handling oflarge gears, shafts, sprockets, and other components serviced intruck, construction, and agricultural equipment shops.

OTC188255 Ton Press Accessory SetSet Includes: No. 1126 bearing pullingattachment, No. 34755 ram pushing adapterwith 1" dia. shank, No. 34756 ram pushingadapter with 1-1/4" dia. shank, No. 34808 V-pushing adapter, No. 1892 14" long V-blocks(pr), No. 28230 ram forcing cap and No. 37368threaded adapter – for single acting only.

OTC21332Pushing Adapter for 100 Ton Press• Must be used with reducing adapter

OTC36469V-Pushing Adapter for 100 Ton Press• Must be used with reducing adapter

OTC1857100-Ton Capacity Heavy-Duty Shop Press• Wide open uprights allow easy positioning of bars and shafts for

straightening or bending.• Upper bolster can be lowered for convenient positioning during

repetitive jobs.• Ram head glides smoothly on rollers for easy horizontal adjustments;

rugged press frame will withstand a full capacity load with the ramhead in any position across the upper bolster.

• Covered by OTC Lifetime Marathon Warranty®

Includes single-acting No. 52434 ram with 10" stroke; No. 4008hydraulic hand pump; No. 9651 gauge; No. 9781 hose (3/8" ID x 10');and pump mounting bracket.

shop pressesfreight termsSEE BACK OF BOOK

28

Headlight Aiming

WELDING

ALC4039030" x 20" Plastic Benchtop Cabinet Blaster• Made of tough LDPE polymer• 30" x 20" work area• One piece construction (no leaks)• Self adhesive underlay• Pistol grip trigger gun with 1/4" nozzle

Also features an overside topwindow/door. Weighs 34 lbs. Made in the U.S.A.

ALC4040236" x 24" Top andSide Door TriggerGun AbrasiveBlasting Cabinet• 100 cfm dust collector included

with all steel cabinets• Heavy duty 14 gauge steel -

welded seams• Full width top drawer• Rubber gloves included• Made in the U.S.A.• Work area: 36"W x 24"H x

24"D. Height: 60". Cushionedfoam armholes.

ALC4040848" x 24" One Door Trigger GunAbrasive Blasting Cabinet• 100 cfm dust collector included with all steel cabinets• Made in the U.S.A.• This model does not have a side door or a foot pedal

ALC40416Soda Blast Conversion Kit• Converts regular blaster to a soda blaster• Removes paint and graffiti without harming surface• Safe to use on aluminum and fiberglass• Will not cause pitting or warping like abrasives• Environmentally friendly

This conversion kit will creat a soda blaster from an abrasive blaster.Can be used back and forth. Abrasive removes rust and corrosion.

ALC4040336" x 24" Top and Side Door Foot PedalAbrasive Blasting Cabinet• 100 cfm dust collector included with

all steel cabinets• Heavy duty 14 gauge steel - welded seams• Full width top drawer• Rubber gloves included• Made in the U.S.A.

Work area: 36"W x 24"H x 24"D. Height: 60".Cushioned foam armholes.

ALC40391Plastic Floor Model Cabinet Blaster • Rubber gloves included• Recommended use with shop vacuum

(not provided)• Requires 36" x 24" x 24" floor space• Rear support frame• Made in the USA

This plastic model floor cabinet blaster ismade of tough LDPE polymer. It has a uniqueclam shell design, with a top that opens. Also it's made with durable construction, steel angle support legs, and a window lens:15-1/2" x 33". Made with quality anddurability to last!

ALC41500Triple Door, Foot Pedal Cabinet with Dust Collector• Top door and 2 side doors• Dust collector mounted on the rear of the cabinet• Foot pedal operated• Heavy duty blast gun• Easy assembly

This cabinet has a full width top door and two sidedoors for easy access. It has a 90 cfm dustcollector mounted on the back of the cabinet. It isfoot pedal operated for more control. It has a heavyduty blast gun with long lasting nozzles. It can beassembled easily with nut and bolt assembly. Noholes to drill, just use a screwdriver to assemble.Includes a fluorescent light.

shop equipment

29

SYM05015000Battery Charger for HBA 5/HBA 5P

SYMSCA1Headlamp Alignment System• Not for state inspection in Maryland or Virginia• ISO color technology finds lamp hot spot• Includes laser floor slope, has field calibration,

and is repeatable and accurate

SYMHBA5Headlamp Auditing System• User Friendly• Rechargeable, replacement battery pack• Laser Floor slope assesment• Field calibrate-able• Multi-bay uasage

SYM05011500Battery Pack for HBA 5/HBA 5P

SYMBCA4Headlight Aimer• ISO Color technology • Laser - determines floor slope• Floor slope adjustment • Fresnal lens - allows for misaligned pattern

SYM03013000

Headlight Aiming

MTNMIG6226225-Amp Commercial Shop(230-Volt) MIG Welder• Full size with cylinder shelf and 10 step output power• Welds from 22 gauge to 1/2" in a single pass with

.023"-.045" diameter wire• Package includes full-sized power source with cylinder

support, HD front casters and solid axle. Includes: TW2style 250-amp torch 12', work clamp, dual-gauge gasregulator, 10# spool .030" mild steel wire, 5-contacttips and operator manual.

WELDING Fluid Handling

IPADTP2020 GPM Mobile Fuel Transfer System• DC Powered, includes Filter and

Water Seperator, two 6' hoses andmanual fuel dispenser

• For Truck Service and Repair,scrapyards,emergency recovery and more!

• Secure and save fuel prior to repairs,scrap, storage or sale

• Uses two group 31 batteries (not included)

• 1000 Gallon flow meter, voltage andamperage meters

This Mobile fuel system is specificallydesigned for the removal and filtrationof fuel to and from any source. Want toremove fuel from a truck prior to sellingit? Need to make fuel tank repairs?Concerned about theft of fuel fromvehicles in storage? Are you scrappingcars trucks or tractors and need tosafely remove the fuel for disposal?These are some of the many reasonsthe DTP20 is a time and money savingshop product.

shop equipment

OTC5077Lo-Profile Transfer Tanker with Electric Pump• Only 7-1/2" high!• 15-gallon reservoir• Pumps moves five gallons a minute

through the 8 foot transfer hose• Can also be used for transferring antifreeze• Removable handle for easy storage

30

MTT500-8100Brake Vac II Brake Fluid Exchanger• Complete brake system flush in just 10 minutes• Pressure and vacuum assist ensuring quick operation• One man operation• Adjustable pressure regulator controls operating pressure• 1 gallon new fluid tank and removable waste tank allows

for multiple services• Fast and efficient brake bleeding system

LIN3669Low Profile Truck Drain with Electric Pump• Includes 120v electric discharge pump for fluid evacuation• Low profile design can be easily positioned under

high-clearance vehicles• Large 17 gallon (65 liter) capacity reservoir• Reservoir molded of high-impact polypropylene and four

large 4” (100 mm) diameter swivel casters• 6 ft (1.8 m) long discharge hose with 3/4” male camlock

connector for external pump

LIN3667Low Profile Truck Drain with Manual Pump• Includes manual rotary discharge pump for fluidevacuation• Large 17 gallon (65 liter) capacity reservoir• Low profile design can be easily positioned under

high-clearance vehicles• Reservoir molded of high-impact polypropylene.

6 ft (1.8 m) long discharge hose with 3/4” male camlockconnector for external pump

• Four large 4” (100 mm) diameter swivel casters

DOWFC-P30A-UL30-Gallon UL Listed Steel Gas Caddy - Air Operated• UL Listed and complies with OSHA guidelines• 30-Gallon capacity steel tank• 4-way directional valve• For use with gasoline, diesel, kerosene,

bio-diesel and transmission fluid

DOWJDI-LP4Low Boy Oil Drain - 17 Gallon Capacity• 48” long x 25 “ wide x 9 high• 9 low profile• Gravity or pressure drain• 6” casters• All-Steel Construction• Expanded Metal Screen Reduces Splash

DOWJDI-17PLP17-Gallon Poly Low-Profile Oil Drain• 17-Gallon High-Impact Poly Tank with

T-Handle that folds for handy storage• (4) 5" heavy-duty casters• Expanded metal shield• Gravity drain valve• Lightweight and dent resistent

LIN3665Low Profile Truck Drain• Low-profile design can be easily positioned under

high-clearance vehicles• Large 17 gallon (65 liter) capacity reservoir;

reservoir molded of high-impact polypropylene• 6 ft (1.8 m) long discharge hose with 3/4” male

camlock connector for fluid extraction• Four large 4” (100 mm) diameter swivel casters• Removable filter screen

Fluid Handlingplease noteMany California jurisdictions have lawsgoverning the temporary storage ofgasoline. Please check with your local /county / California authorities regardingthese laws before purchasing / using aGas Caddy and / or storing gasoline –especially over night.

shop equipment

Fluid Handling SUPER STOREJET1877401/4 Ton Mini-Puller with 5' Lift• Geared Drive Train- JET's exclusive five gear drive

train requires less force to lift or secure a load• Weston Style Dual Pawl Brake System – Dual Pawl

design increases safety by splitting the opposite sidesof the ratchet gear for greater load security

• Alloy Steel Hooks• Heat Treated Load Plates• Grade 80 black oxide coated load chain for durability

JET1875051/2 Ton Lever Hoist with 5' Lift• Weston Style Dual Pawl Brake System – Dual Pawl

design increases safety by splitting the opposite sidesof the ratchet gear for greater load security

• Alloy Steel Hooks• Heat Treated Load Plates

JET577102JET JBG-8A 8" Industrial Bench Grinder• Sharpens, shapes, deburrs and removes

material fast• Totally enclosed, pre-lubricated ball bearings• Heavy-duty guarded toggle switch on 8"• One-piece quick adjusting spark guards• Cast iron wheel guards and dust vents The Jet 8-Inch Bench Grinder comes withindustrial grade 36-grit and 60-grit 8-inchwheels for maximum working versatility. The 1-horsepower, 115-volt motor operates at 3450RPM and will deliver plenty of power for heavygrinding. The grinder sits on a rubber foot toprevent unwanted movement and can be bolteddown if desired for maximum stability. ULlisted.

JET140175JET PTW-2748 27" x 48" 6000 lb. Pallet Jack• 6000 pound capacity• 200 degree turning radius allows room

to maneuver in tight quarters• Solid steel push rods never need adjustment• Articulating 7" poly-over-aluminum steer wheels ensure

continual contact with uneven floors• One-piece cast pump features high quality seals, hardened

and chroma plated ram and piston, top-of-stroke and overloadsafety bypass valves

Height: 18", width: 27", length: 59". This low cost Pallet jack isfull of features. With a tight turn radius and low profile, this workhorse will serve you for years to come.

JET1875061/2 Ton Mini Puller with 10' Lift• Weston Style Dual Pawl Brake System

– Dual Pawl design increases safety bysplitting the opposite sides of the ratchetgear for greater load security

• Alloy Steel Hooks• Heat Treated Load Plates• Safety

31

JET577172JET JPS-2A Pedestal Stand for JET Bench Grinders• Heavy-duty cast iron construction provides

strength and durability• Wide stance base gives you a stable

grinder workstation• Coolant tank and tool tray are on an adjustable

platform for your convenience• Compatible with all JET Bench Grinders

30.6"L x 20.5"W x 5.1"H. Weight: 51.81 lbs.

JET101910JET S90 Series HandChain Hoist, 1 Ton 10' Lift• Weston Style Dual Pawl Brake System

– Dual Pawl design increases safety bysplitting the opposite sides of the ratchet gearfor greater load security

• Alloy Steel Hooks – Industrial rated hooks rotate 360 degreesfor easy rigging, hooks slowly stretch toindicate an overload situation increasingjobsite safety

• Needle Bearing Design – promotes long hoist life with low wearreducing downtime

JET S90 Series hand chain hoists weredesigned with reliability and durability toperform in light-duty industrial applications.Easily maintained and serviced, the JET S90 isthe ideal contractor grade hoist.

JET187741JLP-025A-10 Lever Hoist, 1/4 Ton 10' Lift• Weston Style Dual Pawl Brake System – Dual Pawl

design increases safety by splitting the oppositesides of the ratchet gear for greater load security

• Alloy Steel Hooks – Industrial rated hooks rotate 360degrees for easy rigging. Hooks slowly stretch toindicate an overload situation increasing jobsitesafety

• Heat Treated Load Plates- Heat treated for durability,these extend the life of the hoist in industrialenvironments

JET JLP-A Mini-Pullers are designed with safety anddurability to operate in light-duty industrialapplications. The all steel construction, dual pawlWeston style brake system and Grade 80 load chainprovide proven safety and reliability. Easily maintainedand serviced, the JET JLP-A Mini-Puller is designed towork in tight spaces and low headroom applications.

32

LIN94354Medium Pressure Oil Reel Assembly 50' x 1/2"• Made in the U.S.A. - all steel construction• Inlet/Outlet swivel fully ported for unrestricted

maximum flow, dispensing higher volumes of liquid• Dual needle bearing design provides a smooth

balanced operation• 180 degree double ratchet teeth provide solid latch to

lock hose in multiple positions• Powder coated finish for longer life in your shop

Maximum Working Pressure: 1,500 psi. Includes barereel (94300), 50' x 1/2" delivery hose (73600), ball stop(85517) and 2' connecting hose (73024).

LIN94552High Pressure Grease ReelAssembly 50' x 1/4"• Made in the U.S.A. - all steel construction• Swivel includes quick disconnect for easy hose attachment• Dual needle bearing design provides a smooth

balanced operation• 180 degree double ratchet teeth provide solid latch to

lock hose in multiple positions• Powder coated finish for longer life in your shop

Maximum Working Pressure: 5,000 psi. Includes bare reel (94500), 50' x 1/4" delivery hose (75600), ball stop (85515) and 2' connecting hose (75024).

MTNHR2501/4" x 50' Grease Hose Reel• 5000 lb. operating pressure• All brass main shaft and swivel• 5-1/4" width and 14-7/8" diameter• 2 Wire braided hose• Works for grease• Owner serviceable• Cartridge style spring• Fully closed bead• Excellent for off-road truck mounted applications• 1 year warranty on material and workmanship

MTNHRM5501/2 in. x 50 Ft. Air, Waterand Heavy Oil Hose Reel• 2500 lb. operating pressure• Works for air, water and heavy oil• All brass main shaft and swivel• 5-1/4" W and 14-7/8" diameter• Owner serviceable• Cartridge style spring• Fully closed bead• 1 year warranty on material and workmanship

LIN4417Grease Pump Assembly - #120 Drum• 40:1 ratio professional quality pump assembly

for the automotive repair shop• Includes 7’ hose, control valve, universal swivel

for easy operation, drum cover• Flexible follower plate for positive prime• 4 caster band-dolly for easy mobility around the shop

LIN917Air Operated Grease Pump• Will dispense 45 ounces or 80 cubic inches of

NLGI 0-2 grease per minute at 150 PSI.• Assures positive prime at lowest temperature• Drum cover 46007 finished in Lincoln red;

roll-a-round base 80895 base in black; air motor cover in white

• Height 43-1/8"• Base 17" square

Drum not included.

LIN989Heavy Duty Grease Pump for 25-50 lb. Drum• Steel cover securely clamps to any 25-50 lb

refinery container• Carrying handle provides portability• Follower plate assures positive prime at lowest

temperatures• Cover is rust-proofed and finished in Lincoln red

Bucket shown is NOT included.

LIN6917Air-Operated Portable Grease Pump Package• Lincoln’s time tested 50:1 double acting grease pump

is at the heart of the package• High volume and pressure to handle additional hose

length and/or adapt to hose reel• Smooth, easy to use and quiet for improved

environment, ergonomics• Standard follower wipes 120 lb. drum sides clean and

keeps the drum primed• Four-wheel dolly maneuvers easily around the shop

The LIN6917 is easy to use and operates quietly,improving the shop environment. Package includes: highpressure 50:1 pneumatic pump, high pressure GreaseControl Valve, universal swivel and Coupler and 7' hose;drum cover, flexible follower plate and band dolly withwheels. Portable, heavy duty air powered greaselubrication for light and heavy vehicles, agricultural andconstruction equipment.

Fluid Handling

shop equipment

33

BENRP20FCOil Filter Crusher• Save on disposal costs and storage space• Fulfills EPA and other mandated

environmental standards• No mess design operates clean and

efficiently to lessen spill hazards• Single control valve operation • Exclusive X-shape bevel in press head

pre-aligns filters for absolute vertical press

Oil Filter Crushers

DOWHDC150Heavy-Duty TruckFilter Crusher• Heavy-duty aluminum frame

cabinet surrounds the highpressure hydraulic hose foradded safety and shieldscomponents from damage

• Handles filters 13" in height; 6"in diameter

• Unitized construction allows foreasy maintenance

• Easy to operate: Load the filterand close the door to activatethe crushing cycle

• Specially designed doorchannel prevents drips andleakage, keeping oil in thechamber and not on the floor

UNRUFC850Pneumatic Pail andOil Filter Crusher• Reclaims up to 95% of oil from

used oil filter• Reduces trash volume up to 75%• 7 ton force at 120PSI• Crushes filters and cans up to 12.6

inches and 16.5 inches high• Safety door locks before crushing

cycle beginsOTC182110 Ton Capacity Air Operated Oil Filter Crusher • Crushes up to four automotive filters (3-7/8" diameter x 9"

high) at one time, in approximately 20 seconds• Engineered and built for dependable operation• 100 percent air operation eliminates electrical connections• Generous size of crushing chamber easily accommodates the

largest automotive spin-on filters• Includes mounting stand, No wall mounting or time consuming

installation required

OTC187725 Ton Capacity HeavyDuty Oil Filter Crusher• Handles the big filters (up to 6" diameter and

12-1/2" long) found in trucks, constructionequipment, farm implements

• Crushes filters to 1/4 of original size, removingup to 95 percent of filter’s oil capacity

• Automatic cycle feature: load the filter, push abutton, and walk away

• Air/hydraulic pump works on standard shop air (requires 9 CFM at 100 psi)

• Built-in floor stand (completely assembled)

If your shop concentrates on heavy-duty service,our 25-ton heavy-duty filter crusher is right foryou. It can be used for automotive and light truckfilters as well as the big filters. Features a specialvalve to return the ram automatically. No electricalconnections needed. Whole unit requires just 5square feet of floor space. This is also covered bythe OTC Lifetime Marathon Warranty.

OTC189625 Ton CapacityAir/Hydraulic Automotive Oil Filter Crusher• Crushes automotive and heavy-duty filters

up to 15-1/4" long and 6" diameter • Filters are reduced to 20 percent of original size,

with 95 percent of residual oil removed• Automatic cycle feature lets you load the filter,

push a button, and walk away• Powered by 2 hp electric/hydraulic pump, 230 volt,

20 amp, 60 cycle, single phase, 3,450 rpm• Has 2-gallon reservoir

Built-in, heavy-duty floor stand with leveling pads isdesigned to accept a 30-gallon drum for oil drainage.Made in U.S.A. and covered by Lifetime Marathonwarranty and registration.

Fluid Handling

shop equipment

SuperQuiet

34

IMC218V5HP 80 Gallon Vertical 2 Stage Electric Air Compressor• 208-230 volt single phase• Start-stop pressure switch control• ASME safety valves fully-enclosed belt guard• Tank drain and discharge valve• 2 year full warranty• 15.3 cfm @100 PSI.

IMC318VL7.5HP 80 Gallon VerticalTwo Stage Electric AirCompressor• Start-Stop pressure switch control• ASME safety valves fully-enclosed belt guard• Tank drain and discharge valve• 208-230 volt, single phase• 2 year full warranty• 25.3 cfm @ 100 PSI.

IMC3G3HHL13 HP 30 Gallon Honda Two Stage EnginePowered Compressor• Two year warranty• 12 volt electric and recoil start• Unique E-Z pull tank drain• Fully enclosed belt guard• 12 volt charging system• 25.25 acfm• 75 PSi maximum pressure• 30 gallon horizontal ASME tank

IMC3G3HH11 HP 30 Gallon Horizontal Two Stage Gas Driven Air Compressor• 12 volt electric start and recoil start• Start key / panel• Honda engine• Fully enclosed belt guard• ASME tank and safety valves• 18.5 cfm• 175 PSI• 2 year full warranty.

IMC3G3HKL12 HP 30 Gallon Two Stage Engine-Powered Reciprocating Air Compressor 12HP• T39 pump has a solid cast iron cylinder• 12 HP Kohler Engine• 12 volt electric and recoil start• 25.25 ACFM at 100 PSI• Battery Charging system• 100% factory tested at full pressure• Shipped "wet" ready for use• Dimensions: 44-1/2 in. L x 19 in. W x 45 in. H

Two year "Bumper To Bumper" Warranty!

IMC5020P2HP 20 Gallon HorizontalElectric Compressor• Horse Power: 2• Motor Volt/Phase: 115/230/1• Tank (Gal.): 20• ACFM@40/100 PSI: 7.1@100 PSI• Max PSI: 130

IMC216VSingle-Stage Vertical Electric Compressor• Horse Power: 5• Pump: T29S• Motor Volt/Phase: 208-230/1• Tank (Gal.): 60• CFM Disp: 18.6• ACFM@100/175 PSI: 15.33• Max PSI: 165

IMC318VNTwo-Stage VerticalElectric Compressor• Horse Power: 5• Pump: T39• Motor Volt/Phase: 208-230/1• Tank (Gal.): 80• CFM Disp: 22.43• ACFM@100/175 PSI: 18.50/16.60• Max PSI: 175

IMCQP338VLE7.5hp 3 Phase IMCQP338VE5hp 3 Phase

IMCQP318VLE7.5hp Single PhaseIMCQP318VE5hp Single Phase

80 Gallon Quiet Piston Compressor• Low oil switch and automatic tank drain• Triple-pass pump mounted after-cooler• ASME safety valves fully enclosed belt guard• Includes a full 2 year warranty

air compressors


35

2 Stage Air Compressors

Rotary Screw Air Compressors

Part # HP CFM Voltage Tank Configuration Start-Up Kit

Value Packages

IRTC2340L5 5 14.7 230/1/60 60 Vertical 32305880

IRTC2475N7.5 7.5 24 230/1/60 80 Vertical 32305880

Value Plus Packages

IRTC2545K10-VP 10 35 230/3/60 120 Vertical 32305898

Premium Packages

IRTC2475N7.5FP 7.5 24 230/1/60 80 Vertical 32305880

Part # HP CFM MAX PSI Voltage Tank

Standard Packages

IRTUP6-7.5-150 7.5 25 150 230/1/60 80

IRTUP6-10-150 10 34 150 230/3/60 80

IRTUP6-15C-150 15 50 150 230/3/60 80

Total Air System Packages

IRTUP6-7-15TAS-150 7.5 25 150 230/1/60 80

IRTUP6-10TAS-150 10 34 150 230/3/60 80

IRTUP6-15CTAS-150 15 50 150 230/3/60 80

IRTCSS3L3Single-Stage VerticalElectric Compressor• Horse Power: 3• Pump: Single Stage Cast-iron• Motor Volt/Phase: 230-1• Tank (Gal.): 60• Max PSI: 135• ACFM@100/175 PSI: 11.3/10.3 (90/135 PSIG)

IRTP1.5IU-A9Garage Mate Single-StageAir Compressor• Horse Power: 2• Pump: Single Stage Cast-iron• Tank (Gal.): 20• Max PSI: 90

IRT2475F14G14 HP Gas Drive Air Compressor - Kohler Engine• Horse Power: 14• Tank (Gal.): 30• Max PSI: 175• ACFM@100/175 PSI: 25

IRTC2475F13GHTwo-Stage Gas PoweredAir Compressor• Precisioned engineered components

for over 15,000 hours of trouble free use• Tank (Gal.): 30• Max PSI: 175

IRT46821567Start Up Kit for Air Compressor Model 2475F14G• Purchase of Start Up kit increases pump

warranty to 2 years• Includes oil and air filter elements


air compressors

CPT6120PASEDSuper Industrial 1-1/2" Impact Wrench• Best 1-1/2" impact to loosen very big bolts quickly and smoothly• Operator comfort and control thanks to great ergonomics even at VERY high torque• Constant & progressive torque due to the 2-Jaw clutch• Unmatched durability with Reliable mechanism & durable housing• 360° adjustable D-type side handle

CPT7782-61" Drive Heavy Duty Impact Wrench WIth Extended Anvil• 2,140 ft.lbs - of maximum torque in reverse• Regulator with integrated forward/reverse with 3-position power

settings in both directions

IRT2801" Drive Super Duty Air Impact Wrench• 1,600 ft./lb. of maximum torque• Working torque range: 150-1000 ft./lb. / 204-1360 NM• Blows per minute: 750 • Free speed: 6000 RPM • Standard bolt size: 1-1/4" / 32 mm • Weight: 22 LB. / 9.98 KG. • Built-in pressure-feed lube system

IRT2901" Drive Super Duty Air Impact Wrench• Designed for getting into cramped spaces with big power, the IRT290

has a three-way adjustable handle• It's a good choice for spring work, tractor pads, bus maintenance, and

off-road and farm equipment• Up to 1,600 ft/ lbs. of torque• Pressure-feed lube system for long life• Adjustable side handle for better control

IRT2931" Drive Super Duty Air Impact Wrench• Up to 2,000 ft.-lbs. of torque• Most powerful 1" wrench• Long-lasting tool• Handle exhaust

SUPER STORE

air tools

36

SHV58725105 Gallon 6.5 Peak HP Portable Heavy-Duty Vacuum• 5 Gallon tank• Motor is a single stage 6.5 Horse Power• The power cord is 20'• 7’ x 1-1/2” Lock-On Hose, Replaces 5872462

SHV9621310Shop Vac Professional 12 Gallon Stainless Steel Vacuum• 12 gallon stainless steel collection tank• 6.5 peak HP single stage motor• Upgrade Ultra web cartridge filter• Collector filter bag for fine dust and powders• On-board accessory tool storage

SHV962121012 Gallon 6.5 Peak HP Wet/Dry Utility Vacuum• 12 gallon collection tank• 6.5 peak HP single stage motor• 20ft Power Cord• Upgrade Ultra web cartridge filter• Collector filter bag for fine dust and powders

37

ESC50147Truck Wheel Weight Hammer• Soft head• Hammer is ideal for hammering coated weights• Claw hook is replaceable• Solid wood shaft

GAIBB6LBead Bazooka™ Bead Seater• Most powerful release mechanism on any bead-seating tool• Half the weight of other bead-seating tools - only 14 lbs.!• Push-button trigger allows users to keep both hands on the tank for more control• Fits in the side box of tire service trucks for protection from damage and theft• CE and TUV certification

GAIGB-5ZA5 Gallon Automatic Bead Booster• Automatic valve releases air 20% faster than

manual valves, therefore requiring less pressure and making it safer to use

• Push-button trigger allows user to keep bothhands on the tank, therefore maintainingcontrol during use

GAIBB9LBead Bazooka 9 Liter• Automatic Rapid Air Release System (RAR) makes it the most

powerful inflation product in the market• Light weight (15 lbs.) reduces stress on technician• Push button trigger allows technician to keep both hands on the

tank for more control, making it safer than manual release tanks• “Slotted” Double Barrel directs the air for best overall lift• Fully ASME, CE, TUV & CRN certified• Patent-pending design, patent-pending Automatic Rapid Air Release

System and registered trademark

IPA9060Mobile Tire Pressure Equalizer• Inflate/deflate/equalize up to five tires at once• High flow dual regulator system for front and rear tires• Glycerin-filled high accuracy pressure gauges• Color coded hoses with corresponding panel indicators• Built on rugged mobile cart with pneumatic tires

When added to your PM and Safety lane procedures, the IPA® Mobile TirePressure Equalizer provides a solution to maximize fuel mileage, extendtread life and reduce the risk of blowouts.

IPA9062Four-Tire Inflation Equalizer System• Fast and accurate four-tire inflation, deflation, and

equalization system• High flow, adjustable regulator system for drive axles• Highly accurate, glycerin-filled gauges• Color coded hoses with corresponding panel

indicators• Optional lock on chucks

TSICH-5Tire Bead Seating Tool• 5 gallon capacity ASME certified tank• High visibility powder coat finish• Pre-set safety release valve (160 psi)• 90 degree on/off ball style discharge valve• Large easy read air gauge

ESC10200Bead Breaker Kit• Works on one, two three piece rims• Consists of 10101 Bead Breaker Head, 10500

3-1/2 Qt.Hydraulic Pump, and 10604 Hose assembly• Works with regular compressor at 90-120 psi.• Uses 10,000 PSI hydraulic fluid force• Uses Hi Flow Couplers

Will break beads in seconds using 10,000 lbs of force.Unit will not work on 5 piece rims.

EZREZLINEWheel Laser Alignment Tool• All measurements can be taken in under 10 minutes• E-Z precise axle and wheel alignment• For heavy trucks, all types of trailers• Compact design, easy transport and toolbox storage• Multipurpose measurement capabilities

The EZ Line makes obtaining alignment readings onmost trailer types very simple and fast, from RVs tocommercial trailers. A straight steel bar and bungeecord are all you need in addition to the EZ line, to setthe toe on any vehicle, including trucks, that have an"in" or "Out" toe setting. Includes: 4 magnetic self-centering lasers, measuring tape, 2 magnetic 5th wheelpin adapters and a durable storage/travel case.

EZREZLINEB1SWComplete Alignment Tool Package With Software• Includes everything shown above, plus software, hub and bar adapters

tire tools

38

MPS188001Pro-Link IQ Diagnostic Scan Tool• Saves time by automatically scanning for all vehicle ECUs

to identify types and display active and inactive faults - no need to switch between an engine, transmission orbrake application

• OEM proprietary applications feature manufacturerspecific terminology, additional fault codes, parameters,reprogramming and special tests if applicable

• Intuitive, easy to use, color touch screen displays multiplecodes, ECU data list parameters, graphs, and records atthe push of a button

MPS682020Complete Abs Software Kit For Pro-Link Iq• Read Fault Codes, Clear Fault Codes,

View Brake Data• Coverages ABS Suite and Trailer ABS Suite• Includes: Complete ABS Kit PN 682020,

Trailer Kit PN 682021, ABS Suite PN 682014, Trailer ABS Suite PN 882021, Meritor WABCO® Suite PN 888014, BENDIX® ABS Suite PN 889013 and J560 PLC Adapter PN 602020

The Pro-Link iQ ABS product family provides brake coverage for a wide range ofapplications, making the Pro-Link iQ the industry scan tool of choice for heavy-dutybrake diagnostics. With the introduction of the ABS Suite, the Pro-Link iQ is now a full-service brake scan tool, providing connectivity to tractors and trailers utilizing the SAEJ1587communication protocol. The Complete ABS Kit also comes with a new J560 PLCseven way adapter (available separately) that allows direct connection to a trailerwithout thet ractor. With access to a broad array of special tests, technicians canquickly and easily obtain a reliable and accurate diagnosis of brake status.

IPA9008-SESuperMUTT® Deluxe TrailerTester with Standard Equiptment• Perform leak down test on service and emergency lines

Adjust slackers and measure pushrods using remote control• Power lights individually, all at once, via auto scan or

remote control• Pulses power to shorted and overloaded circuits (patented

Pulsar® technology)• ABS fault codes via Aux and brake circuit activation (i.e.

Wabco/Bendix Tab-6 systems)• Includes: remote control, 5 ft. 7 way cable, chassis ground

cable, external battery connector, 6 ft. glad hands

IPA9008-DLSuperMUTT® Deluxe TrailerTester with Deluxe Equipment• Perform leak down test on service and emergency lines• Adjust slackers and measure pushrods using

remote control• Power lights individually, all at once, via auto scan

or remote control• Pulses power to shorted and overloaded circuits

(patented Pulsar® technology)• ABS fault codes via Aux and brake circuit activation

(i.e. Wabco/Bendix Tab-6 systems)

MIDEXP-1000-HD-AMPDigital Battery and Electrical System Analyzer with Inductive Amp-Clamp for Heavy Duty/Fleets

MIDEXP-1000HDAMPKITHeavy-Duty Expandable ElectricalDiagnostic Platform• Cable voltage drop testing and mutimeter capabilities• AMP testing capabilities including parasitic draw• Tests Flooded, AGM, & AGM spiral batteries• Automotive & Commercial / Fleet Battery & Electrical System

Analyzer with Heavy-Duty Clamps, DDM Leads & Clamps,Amp-Clamp, Printer, & Case

OTC3417HD Scan - Heavy Duty Scan Tool

• Class 4 – Class 8 truck coverage featuring “Automatic Protocol Search”. HD J1587 /J1708 and J1939 CAN, Engine, Transmission/ABS coverage and more!

• Live vehicle data such as: engine speed, engine ECU temperature, percent accelerationpedal position, engine intercooler temperature, engine coolant temperature, batteryvolts, alternator volts, ambient air temperature, and air inlet temperature

• Fast Global OBD II Quick Test; Gasoline and diesel engine coverage; Vehicle datacommunication and power LED indicators

• Demo mode permits operation without vehicle connection; supports multiple Global OBDII trouble code requests, generic codes (mode 3), pending codes (mode 7), enhancedcodes, and GM DTC status

• Automatic recording of data; customize data views in line graph, LED, or digital format with the push of a button

OTC3874HDGenisys EVO™ Scan ToolDeluxe with USA 2012Kit with Domestic /Asian / ABS and HeavyDuty Standard Software• Includes the NEW Genisys EVO featuring

System 5.0 with Code-Assist™• NEW USA 2012 Domestic / Asian with ABS

software including Pathfinder• BONUS USA 2011 European software• Heavy-Duty Standard software with cables• European 2011 Software installed• *Next year's software FREE with purchase, through

December 31, 2013

RDL95-0003BSmoke Pro® Total Tech®

Diagnostic Leak Detector Kit• New sensitive flowmeter to locate

the toughest to find leaks• No need to use inert gas• OEM Approved smoke producing oil

electronics/diagnostics

39

NRS11201JPRO Fleet Service Software Bundlefor Heavy Duty Truck RP1210 ScanTool Diagnostics• Works with OEM Engine, Transmission, or Braking System

in the Heavy Duty arena• Allows you to record real time information for easy play back• Displays Active and Inactive Fault Codes for easy diagnosis

of the problem• Works seamlessly with OEM Software for additional command and

control of specific systems• Toggle between each system without having to launch, or even have,

multiple OE diagnostic programs

NRS61050JPRO® Business Class Fleet ServiceKit with DLA+ PLC• Displays all heavy-duty fault codes• Provides a total vehicle diagnostic approach• Saves time by providing a simple, one screen vehicle diagnostic view• DLA+ PLC Adapter works with all OEM component software

(sold separately)• Comes with Dell "RoadReady" Business Class Computer

NRS63025JPRO Semi-Rugged Fleet Service Kit with Data Link Adapter Plus• Displays all heavy-duty fault codes• Provides a total vehicle diagnostic approach• Saves time by providing a simple, one screen vehicle diagnostic view• DLA+ Adapter works with all OEM component software

(sold separately)• Comes with Panasonic CF-52 Semi Rugged Computer

NRS63050JPRO® Semi-Rugged Fleet Service Kit with DLA+ PLC• Displays all heavy-duty fault codes• Provides a total vehicle diagnostic approach• Saves time by providing a simple, one screen vehicle

diagnostic view• DLA+ PLC Adapter works with all OEM component

software (sold separately)• Comes with Panasonic CF-52 Semi-Rugged Computer

NRS63075JPRO® Semi-Rugged FleetService Kit with DLA+Wireless• Wirelessly displays all heavy-duty fault codes• Provides a total vehicle diagnostic approach• Saves time by providing a simple, one screen

vehicle diagnostic view• DLA+ Wireless Adapter works with all OEM

component software (sold separately)• Comes with Panasonic CF-52 Semi-Rugged Computer

NRS63075-NSJPRO® Semi-Rugged FleetService Kit With DLA +Wireless Adapter• Panasonic Toughbook CF-53 (with 3 year warranty)• JPRO® Commercial Vehicle Diagnostics

Heavy-Duty software module• JPRO® Next Step Service Information software module• JPRO® DLA+ wireless adapter• 9 pin Dual CAN cable, 6 pin cable, and 15’ USB cable• Carrying case

NRS65050JPRO® Fully Rugged FleetService Kit with DLA+ PLC• Displays all heavy-duty fault codes• Provides a total vehicle diagnostic approach• Saves time by providing a simple, one screen

vehicle diagnostic view• DLA+ PLC Adapter works with all OEM

component software (sold separately)• Comes with Panasonic CF-30 Fully Rugged Computer

NRS73025JPRO School Bus SemiRugged Fleet ServiceDiagnostic Kit• Reduce costs, improve safety• Reduce reliance on spare buses• Yellow Bus Adapter• Includes DLA, Ford and GM• Software, adapters, semi rugged laptop included

electronics/diagnostics

40

GDL11-605 12 Volt, 450 Amp Start-All®

• 12 volt nominal, 450 amp cranking capacity• Volt and amp meter to monitor boosting output• Voltage regulated to protect on-board electronics• Antizap® voltage surge protection for

safer boosting• 30 ft., 1/0 gauge welding cable allows

convenient access to vehicles

This small, compact, gasoline powered, heavy duty starterhas 1000 amp full-power jaw clamps that allow higheramperage flow. Polarity and low battery LED indicatorsconfirm proer connections. Features an electric start Briggsand Stratton Vanguard OHV engine with single switch foreasy operation. Ideal for small fleets, in town trucks, rentaland agricultural equipment. Dimensions are 12"L x 27-1/2"W x 26"H and weighs 315 lbs.

GDL11-61012V Start-All®, 700 AMPS• 12 Volt jump starting• 700 Amp output• Full voltage regulation• Volt and amp meter• Single cable, single switch for easy operation

This Electric Start, air cooled Briggs and StrattonVanguard OHV V-Twin gasoline engine with 2-1/4gallon fuel tank has the output necessary forstarting heavy-duty vehicles and equipment.Performance you can rely on - start after start,year after year, and power that will crank enginesin cold weather climates vehicle after vehicle.Powerful 12 volt jump starting in a compact size.

GDL11-620Start All® 12/24 Volt 700/350 Amp Generator• Voltage regulated - controls output voltage

to a safe level for today's vehicles• Surge protected with AntiZap provides

safer boosting• Volt and amp meter to monitor boosting output• 30' 1/0 gauge. cable allows flexibility and ease of use• 1000 amp full power clamps allow higher amperage flow

The 11-620 has the output necessary for starting heavy duty vehicles and equipment.Performance you can rely on - start after start, year after year - and power that will crankengines in cold weather climates vehicle after vehicle. Powerful 12/24 volt jump starting ina compact size. Electric start, air cooled Briggs and Stratton Vanguard OHV V-Twingasoline engine with 2-1/4 gallon fuel tank.

GDL11-621Start-All 12/24 volt 700 amp with AC Generator• Output: 12 volt nominal, 700 amp;

24 volt nominal, 400 amp• Cables and Clamps: 30ft., 1/O ga. welding cables;

1000 amp full-power clamps• AC Generator: 2000 watt, 1 duplex 120 volt,

20 amp outlet• Voltage regulator with reverse polarity protection

controls output voltage to a safe level for today's electronics

• Surge protection with Antizap provides safer boosting

• Polarity and low battery LED indicators confirm proper connections

• Single DC boosting switch for easy operation• Engine: Electric start, air cooled Briggs and

Stratton Vanguard OHV V-Twin gasoline enginewith 2-1/4 gallon fuel tank

GDL13-700Fleet-Start - 12 VoltJump Start Unit• Microprocessor controlled with patented

quick start technology• Batteries are charged by the vehicle's

electrical system or by the built-in 120 volt AC fully automatic charger• Includes reverse polarity and dead short circuitry protection• Quick-disconnect red plug for plug-to-plug operation• Includes full-power jaw clamps with 30 ft. 4/0 cable;

Remote switch with 25 ft., coiled cord

Our Fleet-Start Jump Start Unit quickly delivers the energy to start a vehicle in a fewseconds. It is ideal for heavy duty jump starting and will keep your semi-trucks, deliverytrucks and tractors on the go. This unit has been known to jump start forty vehiclesconsecutively before recharging, which means your fleet gets moving without delay.

The Fleet-Start has more power than a battery box of 4 group 31 batteries and it'soutfitted with Goodall's patented SafeStart Technology. SafeStart protects your fleet'selectronics and has been tested by our loyal customers in the most extreme of weatherconditions. The modular design of this unit allows for easy maintenance andaccessibility.

SOLFMB1224 12/24V Fixed BoxCommercial Jump Starter• 1800 CCA in 12 Volt mode• 900 CCA in 24 Volt mode• Includes 3 Group 31 batteries• Automatic 7Ax3 charging system• 16' 4/0 jumper cable leads

Providing endless jump starts for commercial fleets or heavyconstruction equipment, this unit will start any 12 Volt or 24 Voltengine. Recharge using AC cord or connect permanently to servicevehicle's 12 Volt alternator harness.

battery/portable power

SCUPSJ-4424SCUPSJ-3612SCUINC812ASCUPSW-61224

41

CMF415377500/9375 Watt Portable Generator• Heavy duty power: 7500 running

watts/ 9375 starting watts• Low oil shut-off• 4 stroke, air-cooled engine• Electric and recoil start• Cast iron sleeve for durability

Complies with both the U.S. EPA andstate of California Air ResourcesBoard (CARB) emission regulations.

MLW4950-20Heavy-Duty 5,000 Watt Gas-Powered Generator• Vanguard™ OHV commercial engine (270cc) with

electronic ignition system, low oil alert system• Premium alternator with Automatic Voltage

Regulation (AVR) and Full-Time, Max PowerOutput (120v and/or 240v)

• Extra-large, metal gas tank (7.5g) with up to 60percent more capacity

• Innovative hand-truck design with quick releasefolding handle, integrated fold away Lift-Hook

• Full generator GFCI protection and dedicated,branch-rated (UL 489) circuit protection

SOL300112 Volt CommercialCharger/Starter with Air Compressor• Jump starting power is determined by

user-installed battery – recommendedbattery size is 1000CCA. Requires Group31 battery (not included)

• Rugged, high impact case for durabilityplus large pneumatic wheels for easymaneuverability over all surfaces 10 ampauto charger keeps onbaord batterycharged and can be used to chargevehicles batteries also

• 5 ft. #2 gauge cable with industrial gradeclamps. All cables (including power cordand air hose are retractable for easymanagement

• 150 PSI air compressor with automaticshut-off switch and hands free clip on airchuck. Compressor can inflate a 14" cartire in less than 2 minutes. Includes 1 yearlimited warranty.

SOLHT1224Heavy Truck 12/24 Volt CommercialCharger/Starter• Automatic 10 Amp battery charger • 1400 cold cranking amps in 12 volt mode • 800 cold cranking amps in 24 volt mode • 10’ jumper cable leads • Ships with (2) Group 31 batteries

42

NOW Freight Evaporative Cooling Units• Lowers ambient temperatures an average 20 degrees F• FREE Vinyl Covers with purchase while supplies last

PORPAC2K36HPVS • 36" 2-speed fan• 20 gallon water reservoir• Cools 2,650 sq. ft• Operates on 110 volts and tap water• FREE Vinyl Cover: Part # PORPAC-CVR-01

with purchase of PORPAC2K36HPVS ($000.00 FREE Good Retail Value) While Supplies Last

PORPAC2K482S• 48" 2-speed fan• 22 gallon water reservoir• Cools 3,500 sq. ft• Operates on 110 volts and tap water• FREE Vinyl Cover: Part # PORPAC-

CVR-03 with purchase ofPORPAC2K482S($000.00 FREE Good Retail Value) While Supplies Last

PLC6622-000036" PolarCool “Zone 11K” Portable Evaporative Cooling Fan• New Aerodynamic Roto Mold Design• Electronic sensors (low water cut off,

water fill sensor)• Touch pad control, (10 variable speeds)• 38 gallon reservoir and freshwater

outlet• Highest airflow of any 36" evaporative

cooler in the market

New “ZONE 11K” is the first of the allnew portable cooling fan line fromPolarCool. It is a 36" model and featuresour all new aerodynamic design andheavy duty plastic housing. The ZONE11K will revolutionize the evaporativecooling industry. Operates for pennies aday and lowers the temperature 15 to 25degrees, and it is ready to use right out ofthe box. 11,000 CFM and cools 3,000plus feet. Casters are rugged, durable andcome pre-mounted.

PLC6622-350248" Single Speed Evaporative Cooling Fan• 17.500 cfms, cooling area: 4000 square ft.• 230 voltage• Single speed• Stainless steel housing for durability and long life• Hinged top cover for easy access and maintenance

Other features include: 13.5 gallon reservoir; large wheels for extreme mobility;controls and valves are in a protected location; uses the thickest and longestlasting pads in the industry; coated pad edges for easier cleaning and durability,drain plug for easy drainage and heavy duty cord sets.

PLC6622-250236" Variable Speed Portable Evaporative Cooling Fan• 10,000 cfms, cooling area: 3000 square ft.• 115 voltage• Stainless steel housing for durability and long life• Touch pad controller interface with LED indicators, 10 speeds available• Low water automatic prompt shut-off

Other features include: 12.5 gallon reservoir; large wheels for extreme mobility; hinged top cover for easy access andmaintenance; controls and valves are in a protected location; uses the thickest andlongest lasting pads in the industry; Coated pad edges for easier cleaning anddurability, drain plug for easy drainage and heavy duty cord sets.

VINYL COVERWITH PURCHASE

FREE

VentilationPre-Paid

In Stock


FREE

ac and shop coolingfreight termsSEE BACK OF BOOK

43

CrushProof® and the CT logo are registeredtrademarks of Crushproof Tubing Co. in theUnited States and other countries and arebeing used with permission.

Flarelock Hoses• Made exclusively for cars & small trucks• Each end is flared to permit connection of

two or more links at the same time

CRU11AFLT2502.5” x 11 ft. (compact cars)

CRU11AFLT300 3” x 11 ft. (passenger cars)

CRU11AFLT400 4” x 11 ft. (gas trucks)

Tailpipe Adapters• Designed for easy adapting to all sorts of vehicle

tailpipes

CRU17AF300 - Straight adapter • With hook & chain fits tailpipes up to 2-1/2”

CRU17AF475 - Oval adapter (3” x 6” oval) • Fits tailpipes oval 2-1/2” x 5-1/2”

CRU17AF575 - Oval adapter (3-1/2” x 8-1/2”) CRUF675 - Oval/Twin adapter (3” x 11”) CRU17ARA250 - Tailpipe/Stack AdaptersCRU17ARA300 - Bell Shaped Adapter

Splice Connectors• Allows 2 hoses to be joined togetherCRU16LSP30 3”CRU16LSP40 4”

“Y” Connectors• Allows 3 hoses to be joined together• Rubber connector

CRU16LRY25 2-1/2”CRU16LRY30 3”

CRU16LDF252-1/2” Rubber Door Port

CRU19MADF30Door Ports• Allows hose to be vented through the door • 3” aluminum

MSC69100A/C COMPLETE RECOVERY SYSTEM WITH 30 LB DOT TANK• Body• High performance oil-less compressor• High volume cooling fan design• Automatic low pressure Cut-Off Switch• Liquid compatible head-valve system• Safety high pressure Cut-Off Switch• Fully reinforced hard plastic casing• Made in USA

ROB17800BRefrigerantRecovery/Recycling/RechargeMachine for MultipleRefrigerantsRecovers, recycles, evacuates, and recharges R-12, R-134a, R-22, R-502 MP and HP blends, and many more

• Ideal for refrigerated trailers, buses, RVs with multiple refrigerants

• Lockout panel prevents mixing of refrigerants• Comes with two 50-pound tanks• Internal clearing

If your shop services a variety of vehicle types withdifferent or multiple A/C and refrigeration equipment or systems, you need this machine.

DROP SHIP ONLY

ROB75700CoolTech Coolant Exchanger• Engine Off feature removes pulleys,

belts and fan blades from the safety equation• No additional ventilation required• Vacuum mode creates a "push/pull"

exchange process allowing the technician tosafely remove high pressure in a hot system

• "Hands-off" transfer of used coolant to a bulk tank prevents spills and helps protect the technician

Ventilation

SHOP cooling/VENTILATION

44

OTC5280Diesel Particulate Filter (DPF) Cleaner• OE tested and Dealer recommended – By many major diesel engine manufacturers.• Robust design – For long shop life. Can be used as part of a preventative

maintenance program.• High Pressure cleaning process for thorough cleaning of ash from DPF

– produces 10 times the burst energy of competitive low pressure units.• Initial Burst Quick check – To identify filters too plugged for proper cleaning.• Movable with locking wheels – For placement throughout the shop.• Computer Controlled Process Based on OE Requirements – for “Start to End”cleaning

without constant technician monitoring.• Containment of hazardous ash – For easy disposal.• HEPA Filter Air Exhaust System – To exceed environmental air standards for shop.• Operates on standard 115V outlet.• Proven to clean to over 92% efficiency. (3)

(3) Third-party OEM test results using pin gauge measurement with approved SPXadapters and burst cycles. Actual results may vary.

OTC5281DPF Thermal Processing UnitThe 5281 DPF Thermal Processing Unit is a device which will thermallyregenerate a DPF unit at a controlled, pre-programmed rate.Sometimes, the DPF cannot be regenerated on the truck due to a failure withthe vehicle's own regeneration system, or in the case of retrofit applications, alack of an on-vehicle regeneration system. Thermal regeneration of DPFs isused in conjunction with the OTC 5280 DPF Cleaner, and maximizes thecleaning efficiency of the cleaner.

Designed to facilitate the cleaning of dirty filters – especially those with highamounts of wet soot, and unburned hydrocarbons.

• Pre-programmed thermal profile controls temperature 'ramp up' and 'cooldown' to protect DPF from thermal shock, reducing the risk of DPF cracking.

• Holds temperature constant for two hours to ensure complete regeneration offilter.

• Built-in safety door lock and electronic door switch prevent unauthorizedopening of the door when temperatures exceed 200 degrees F.

• Large chamber accommodates various DPF sizes and shapes. Front accessdoor allows for easy access to the thermal chamber.

• Includes both standard cycle and "pre heat" cycle for oil-soaked filters.• Internal chamber dimension: 24" (L) x 24" (W) x 26" (H).

OTC5286Portable Diesel Particulate Filter Cleaner• Lightweight and highly portable - ideal cleaning

system for use in the shop or on a service truck• Flexibility - clean DPFs from 6" to 15.5" in diameter

using shop or compressed air of at least 100 PSI• No internal filters to clean or replace• Focused Air Jet Technology™ - concentrates

a precise high pressure stream of air directly intoevery cell

• Rugged design provides maximum durability

DOWDEF-1ADEF (Diesel Emission Fluid)55 Gallon Drum Dispensing System• The Fuel Chief System is one of the industry's first

"all inclusive" service systems for refilling a vehicle'sonboard Urea system tank

• Maximum head 12' Pumping DEF @ 5.7psi• 120 Volts, 60 Hz, 2 full load amps• 40" suction tube• Up to 6 G.P.M.

The Fuel Chief line has been specifically designed for the convenient and safeservice of the new SCR (Selective Catalyst Reduction) systems that require fillingduring normal service operations.

The Fuel Chief Systems were the first in the industry to receive any domesticvehicle OE approval, and in many circles are considered the leader in Ureadispensing today!

def


LIN1884

PREPAIDFREIGHT

PREPAIDFREIGHT

Freight Terms • Freight delivery shipments must be inspected for damage and loss. • Inspect for obvious damage and concealed damage.• Confirm carton/pallet count. • Refuse shipment or notate damage/loss on delivery document.• Accepting and signing for a damaged or a short shipment releases the carrier and distributor from any claim responsibility.• Additional services provided by the carrier such as, lift-gate, residential delivery or special handling will incur additional freight charges.

Manufacture indexALC Keysco (ALC) ..........................................28AME International (AMN) .........................15, 21Amerequip (AMQ) ..........................................24American Forge & Foundry (INT) .........7, 10, 25American Imc (IMC) ...................................1, 34American Power Pull (AMG)...........................14Ammco (AMM)........................18-20, 22, 25, 48Astro Pneumatic Tool (AST) .......................9, 25Back Buddy (BBD) .........................................13Bend-Pak (BEN) .............................................33Bosch (BOS)...............................................1, 19Branick Industries, Inc. (BRA) ..................13, 21Champion Fulfillment (CMF) ..........................41Chicago Pneumatic (CPT) ..............................36Crushproof Tubing (CRU) ...............................43Esco Equipment (ESC)....................9, 13, 15, 37E-Z Red Company (EZR).................................37

Gaither Tool (GAI) ...........................................37Goodall Mfg. (GDL) ...................................40, 48Ingersoll Rand (IRT) .................................35, 36Innovative Products Of America (IPA) .29, 37-38John Dow Industries (DOW) ...............30, 33, 44K Tool International (KTI)..................................9Launch Tech USA (LAU) ...................................2Lincoln Lubrication / Industrial (LIN).......23, 30,32, 45Mastercool, Inc (MSC) ...................................43Midtronics Inc. (MID) .....................................38Milwaukee (MLW).....................................14-15Motorvac (MTT)........................................30, 47Mountain (MTN)...........................1, 3,-5, 29, 32Mueller-Kueps (MLK) .....................................24Nexiq Technologies (MPS) .............................38Noregon Systems (NRS) ................................39

Omega (OME) .....................8, 10, 11, 17, 24, 48OTC (OTC).......6-7, 10-13, 15-17, 26-27, 30, 33, 38, 44Polarcool (PLC) ..............................................42Port-A-Cool (POR) ....................................42, 48Redline Detection (RDL).................................38Robinair (ROB) ...............................................43Schumacher/DSR (SCU).................................41Shop-Vac Corporation (SHV)..........................36Solar / Clore Automotive (SOL).................40-41Sunex International (SUN)......................5, 9, 25Symtech Corporation (SYM) ..........................29Tire Service Equipment (TSI) .........................37Uni-Ram Corp (UNR) ......................................33Wilton-Jet (JET)..............................1, 14-15, 31

2 Post Lifts ......................................................44 Post Lifts ......................................................3Abrasive Blasting ..........................................28AC/Shop Cooling............................................42Air Compressors ......................................34-35Air End Lifts .....................................................7Air Impact Wrench.........................................36Air Lift and Support Stand.............................17Air Over Jacks .................................................9Air Tools.........................................................36Air/Hydraulic Service Jacks .....................6-7, 9Aluminum Jacks and Rams...........................15ATF Exchange Filter.......................................47Axle Jacks .......................................................9Back Buddy II ................................................13Battery Chargers ...........................................41Battery Starters .......................................41, 48Battery/Portable Power .................................40Bead Breakers...............................................37Bead Seating Tools ........................................37Bench Grinders..............................................31Brake Anchor Pin Pushers .............................16Brake Lathes............................................18-19Chain Hoists .......................................14-15, 31Chain Pullers .................................................14Clutch and Flywheel Handlers.......................16Compressors ...................................................1Coolant Exchange..........................................47Cordless Grease Gun .....................................45DEF................................................................44Diagnostic Leak Detectors ............................38Diagnostics/Electronics ...........................38-39Drill Presses ..............................................1, 14

Electronic/Diagnostics .............................38-39End Lifts ..................................................10, 48Engine Cranes..........................................11-12Engine Stand .................................................17Evaporative Cooling ................................42, 48Floor Jacks......................................................5Fluid Handling ...............................................29Flywheel Handlers.........................................16Fork Lift Jacks...............................................16Fuel System...................................................47Fuel Transfer System.....................................29Generators.....................................................41Grease Hose Reels ........................................32Grease Pumps ...............................................32Hand Trucks...................................................14Headlamp Alignment .....................................29Hose Reels ....................................................32Impact Wrench ..............................................36In-Car Air Quality ...........................................47Jacks.............................................................14Jump Starter .................................................40Lever Hoists...................................................31Lifting.........................................................1-17Load Binders .................................................14Load Levelers ................................................13Mini Pullers ...................................................31Motor-Rotor Repair Stand .............................16Motorcycle Lifting............................................5Oil Drains.......................................................30Oil Filter Crushers..........................................33Pallet Jacks ...................................................31Portable Power/Battery .................................40Power Pullers ................................................14

Power Steering Fluid Service ........................47Power Train Lifts............................................16Rams .........................................................6, 15Recovery/Recycling/Recharge Machine........43Scan Tools ............................................2, 38-39Service Jacks ..............................................5-8Shop Cooling ...........................................42, 48Shop Presses ...........................................24-27Shop Vacs......................................................36Shop Ventilation ............................................43Start-All ...................................................40, 48Strut Spring Compressors .............................13Strut Tamer....................................................17Tire Changers.......................................1, 21-22Tire Pressure Equalizers................................37Tire Spreaders...............................................21Tire Tools .......................................................37Trailor Testers ..........................................38-39Transfer Tanker..............................................30Transmission Jacks ...................................6, 10Truck Drains ............................................23, 30Truck Ramps .................................................17Under Axle Jacks .........................................6-7Vehicle Lifting..............................................1, 3Ventilation .....................................................43Welding .........................................................29Wheel Alignments .........................................37Wheel Balancer .............................................48Wheel Changers ............................................20Wheel Dolly..............................................13, 17Wheel Weight Hammers ................................37Winches.........................................................14

Descriptive index

MTT500-0500MTT400-0501MTT500-1125MTT500-0220MTT500-5100PMTT500-7050MTT400-0050

FALL 2014 edition

PREPAIDFREIGHT

PRES

ORTE

DST

ANDA

RDU.

S. P

OSTA

GEPAID

PERM

IT #

75LA

KELA

ND, F

L

P.O B

ox 9

0009

Lake

land

, Fl 3

3804

This advertisement was prepared in advance, therefore merchandise availability is subject to delivery bymanufacturers as scheduled. All advertised items are not stocked by all stores. Not responsible for typographical orpictorial errors. Quantities limited. CAUTION: Always wear appropriate safety equipment and observe safety advice

and proper use of equipment as instructed in warning and caution labels and operational instructions.

EQUIPMENT

AMMV2003DAVero V200Series WheelBalancer • High volume, direct drive

wheel balancer• Industrial Touchscreen• Integrated laser guided

weight placement• Enhanced residual static

minimization

GDL11-605 12 Volt, 450 Amp Start-All®

• 12 volt nominal, 450 amp cranking capacity• Volt and amp meter to monitor boosting output• Voltage regulated to protect on-board electronics• Antizap® voltage surge protection for safer boosting• 30 ft., 1/0 gauge welding cable allows convenient

access to vehiclesNOW Freight

Evaporative Cooling Units• Lowers ambient temperatures an average 20 degrees F• FREE Vinyl Covers with purchase while supplies last

PORPAC2K482S• 48" 2-speed fan• 22 gallon water reservoir• Cools 3,500 sq. ft• Operates on 110 volts

and tap water• FREE Vinyl Cover: Part #

PORPAC-CVR-03with purchase ofPORPAC2K482S($000.00 FREE Good RetailValue) While Supplies Last

Pre-Paid

In Stock


FREE

OMEHW93690C10 Ton Air Operated End Lift with High Lift 10 Ton Stands• Lifts 10 tons at 200 psi• 2-12" pneumatic rear tires and 2-6" casters for

easier transport and positioning under load• Less maintenance with one large cylinder• Pin style column adjust in 2 inch height

intervals on jack stands• Ideal for fleet, agricultural and construction

maintenance

probalance technology

EASYtransport

Equipment 2015

Documents

Transcript of Equipment 2015