Epoxy Hunepoxytsman
-
Upload
rehan-sadiq -
Category
Documents
-
view
225 -
download
0
Transcript of Epoxy Hunepoxytsman
-
7/25/2019 Epoxy Hunepoxytsman
1/8
Tel No. : 922136688411 , 922132040243
Fax No. : 922136635840Email : [email protected]
Power transmission and distributionEnergy in motion
powered by Araldite systems
NIHAL POLYMERSAuthorized Distributor
mailto:[email protected]:[email protected] -
7/25/2019 Epoxy Hunepoxytsman
2/8
GENERATORS & MOTORS
Araldite and Aradur casting and impregnation systems can be
used in all insulation components of motors and generators thanks
to their high mechanical strength, the strong adhesion to various
metals and substrates and their excellent dielectric properties. The
low resin viscosity ensures homogenous impregnation.
The materials have very high temperature resistance and withstand
extreme thermal cycling in service. The trend to an increased poweroutput, higher integration density and decreased size for generators
and motors requires thermal management. Our heat conductive
products are the ideal solution to dissipate the heat.
Applications:
Small Coils & MotorsLarge Rotating Machines
-
7/25/2019 Epoxy Hunepoxytsman
3/8
INSULATORS & BUSHINGS
The main requirement for insulators is to obtain high cantilever
strength whereas for bushings, the main required properties are:
void free castings, low partial discharge level of castings and gas
tight castings when in use with SF6 gas.
For outdoor applications especially good and proven weathering
resistance is required. Araldite cycloaliphatic outdoor systems are
backed by 40 years of service experience. Araldite systems
reduce leakage currents and therefore further improve reliability and
extend life expectancy of insulators.
Applications:
Indoor Systems
Outdoor Systems
-
7/25/2019 Epoxy Hunepoxytsman
4/8
INSTRUMENT TRANSFORMERS
A general requirement for casting systems for instrument
transformers is high crack resistance. Therefore the glass transition
temperature (Tg) of the cured system has to be properly chosen: as
low as possible and only as high as necessary.
Applications:
Indoor Systems for Medium Voltage
Outdoor Systems for Medium Voltage
-
7/25/2019 Epoxy Hunepoxytsman
5/8
SWITCHGEARS
General requirements for casting systems for switchgear parts are:
- medium to high glass transition temperature
- Tg adjusted to service temperature (e.g. service temperature
105 C requires Tg>115 C)
- high resistance to mechanical creeping because of gas
pressure in GIS parts
In order to increase productivity, Araldite NPC systems have been
developed, which do not require post cure anymore.
Indoor Systems for Medium and High VoltageOutdoor Systems for Medium Voltage
-
7/25/2019 Epoxy Hunepoxytsman
6/8
DRY TYPE DISTRIBUTION TRANSFORMERS
The dry-type distribution transformer application is one of the
fields where Araldite systems have gained their long
successful experience. Araldite product range fulfils the
very demanding requirements on insulation systems.
General requirements for cast resin transformers are high crack
resistance, slow curing process to avoid internal stresses and
the high thermal class.
-
7/25/2019 Epoxy Hunepoxytsman
7/8
ELECTRO COMPOSITES
Electro Composites are semi-finished products for usage in
electrical engineering such as press-boards, flexible and rigid
sheets, pre-pregs, rods, tubes and tapes. They are manufactured
with matrix resins reinforced by fibres, filaments and fabrics.
Araldite matrix systems provide low viscosity to ensure good
impregnation combined with excellent mechanical and electrical
insulation properties covering a broad Tg range.
The systems can be processed by pultrusion, filament winding and vacuum
impregnation. The range of impregnation systems is complemented
by a casting system for composite insulator housings providing apackage together with the matrix system for the rods
Applications:
Impregnation Systems for HV bushings (ERIP),
Composite Insulator Rods and Tubes:
Casting System for Composite Insulator Sheds
-
7/25/2019 Epoxy Hunepoxytsman
8/8
ADHESIVES
Araldite adhesives are high-strength materials formulated for
use in a broad range of applications. The adhesives are UL recognized
for high-temperature use and exhibit good dielectric
characteristics as well as excellent chemical and moisture
resistance.
In addition, the products are easy to handle with a
wide range of work lives and the ability to cure at room and
elevated temperatures. The durable Araldite adhesives are sag
resistant, resist shrinkage and are easy to apply from dual-barrel
cartridges or via automated mixing/dispensing equipment.