Version: November 16, 2009 EPMA of Particles Electron probe microanalysis EPMA.
EPMA Quality for PM Seminar 2018 Brochure
Transcript of EPMA Quality for PM Seminar 2018 Brochure
Systematic Approach to Quality Management in Powder Metallurgy17 - 18 May 2018
Venue: Hotel NH Viapol, Seville, Spain
www.epma.com/seminars
Dev
elop
ing
the
Pow
der
Met
allu
rgy
Futu
reeuropean powdermetallurgy association
© Andrew McLeish 2017
09/05/2018 | Version 4
Dev
elop
ing
the
Pow
der
Met
allu
rgy
Futu
reEPMA PM Structural Parts Seminar 2018
Systematic Approach to Quality Management in Powder Metallurgy (PM)
IntroductionThe Systematic Approach to Quality Management in PM seminar will mainly focus on the quality of PM Structural Parts. PM is a continually and rapidly evolving technology embracing most metallic and alloy materials, and a wide variety of shapes. PM Structural Parts are mainly produced by mixing die pressing and heating (sintering) powder alloys before possible post processing*. The main market for the iron based PM Structural Parts is the automotive industry. The seminar will focus on the processes but most of the presented approaches can be applied to other sectors.
Participants will be shown PM’s advantages and techniques by leading experts from both industry and academia. The seminar will focus on such aspects as, quality requirements in fast changing environments, quality systems and related standards, techniques for continuous improvements and basic metrology to name but a few. This intensive 2-day training course will be beneficial to technical and managerial personnel, as well as end users who wish to gain a more comprehensive idea of quality in the PM process.
For further information, please contact Scarlett Williams, EPMA’s Event & Project Co-ordinator: [email protected] or Tel: +44 (0)1743 24 88 99
17 - 18 May 2018 | Seville, SpainRegistration Deadline: 11 April 2018
Course Fees and Booking Information
EPMA Members (paid up) €700Academics (Non-Members) €700Non-Members €1000End Users* €400
* ‘End Users’ are defined as Original Equipment Makers (OEMs), Tier 1, Tier 2 and System Suppliers.
The course fee includes two nights accommodation at the hotel (16 - 17 May 2018), all course materials, coffee breaks, lunches and a special dinner in Seville on the evening of 17 May 2018.
Space will be limited and early booking is highly recommended. Places will be allocated on a first come, first served basis and will only be confirmed when payment is received.
Terms and ConditionsCancellations received after 11 April 2018 will not be entitled to a refund.
Organised by: European Powder Metallurgy Association (EPMA)
EPMA, a non-profit organisation formed in 1989, is the leading trade association for powder metallurgy in Europe. Its key functions are to represent the interest of the European PM community, to promote PM technology and develop the PM process. Further information on the EPMA and its activities can be found online at www.epma.com
© A
ndre
w M
cLei
sh 2
017
Dev
elop
ing
the
Pow
der
Met
allu
rgy
Futu
reEPMA PM Structural Parts Seminar 2018
Seminar Schedule
The programme may be subject to change
Registration Deadline: 11 April 2018www.epma.com/seminars
Thursday 17 May 201808.30-09.30 Registration and refreshments
09.30-09.55 Presentation of EPMA Dr Olivier Coube (EPMA)
09.55-10.30 Quality Systems and related standards: ISO 9001, IATF 16949, VDA 6.3
Mr Felipe Gimeno (AENOR)
10.30-11.00 Refreshment Break
11.00-11.40 Material and process scatter of the PM industry and its comparison to other manufacturing routes
Dr. Markus Schneider (GKN Sinter Metals)
11.40-12.20 Statistics applied to quality: reception controls, process control and audits
Dr. Toni Garay (AMES)
12.20-13.15 Lunch
13.15-13.55 The benefits of Advanced Product Quality Planning (APQP) as part of an integrated solution for quality management
Mr Lars van Strälen (Babtec) Mr Peter Hönle (Babtec GmbH)
13.55-14.35 New mobility, automated driving, new business models – challenges for warranty and reliability management
Dr Andreas Braasch (IQZ)
14.35-15.15 Management of quality claims and problem solving TBC
15.15-15.45 Refreshment break
15.45-16.25 Techniques for continuous improvement Dr Jesus Penafiel (AMES)
16.25-17.05 Basic Metrology: Characteristics and measurement methods Dr Stephanie Bell (NPL)
17.05-17.45 Non contact gear scanning: HN- C3030 Mr Joris Vandormael (Nikon Metrology)
20.00-23.00 Seminar Dinner
Friday 18 May 201808.30-08.50 Arrival and Refreshments
08.50-09.10 Case Study 1: Defects detection with multi-frequency Eddy currents test
Mr. Albert Rodríguez (AMES)
09.10-09.40 Case Study 2: Dimensional precision of synchro sleeves with different materials and process routes
Dr Mats Larsson (Höganäs)
09.40-10.00 Case Study 3: Optical measurements of PM gears Mr Joris Vandormael (Nikon Metrology)Dr Markus Schneider (GKN Sinter Metals)
10.00-10.30 Refreshment break
10:30-10.45 Case Study 4: A Picture is worth a thousand words – A warranty management picture book
Dr Andreas Braasch (IQZ)
10.45-11.15 Case Study 5: Taceability on single part level Dr Franz Hinterberger (Miba)
11.15-12.15 Lunch
12.30-15.00 Coach departs for tour to First Quantum Minerals, Copper Mining, Extraction and Refining
13.00-15.30 Tour of First Quantum Minerals
15.30-1600 Return coach to Hotel NH Viapol
* There is a small additional cost for visit to First Quantum Minerals of €20 and you can opt into the visit when registering..
Dev
elop
ing
the
Pow
der
Met
allu
rgy
Futu
reEPMA PM Structural Parts Seminar 2018
All information correct at time of print. E&OE.
Seville
Seville is the capital of southern Spain’s Andalusia region. It’s famous for flamenco dancing, tapas and wonderful weather. Originally founded as a Roman city and now home to three UNESCO World Heritage Sites, Seville is bursting with antique charm. The Alcazar palace complex is a stunning collage of architectural styles, and the Cathedral will impress you with its beauty and its status as the burial site of Christopher Columbus.
Seminar VenueNH Viapol,Calle Balbino Marrón, 9,41018 Sevilla,SpainTelephone: +34 954 64 52 54Website: www.nh-hotels.com/hotel/nh-sevilla-viapol
Air
Situated in the south of Spain, Seville Airport lies ten kilometres north-east of the capital city of the region, between the city of Seville and Rinconada. The airport is locally known as San Pablo Airport.
Airlines present at Seville Airport are for example Air Berlin, Air Europa, Brussels Airlines, Iberia, Ryanair, Royal Air Maroc, SAS, Spanair, TAP Portugal and XL Airways France among others.
Train
The Santa Justa train station is located to the north-east of the city centre, on Avenida Kansas City.
Santa Justa train station is Seville’s main train station, offering regular services to destinations all over Andalucia: Huelva, Cadiz, Jerez, Jaen, Granada and Almeria; high-speed AVE trains go to Cordoba and Malaga, and beyond to Madrid, Valencia and Barcelona.