Enzotech - STPsenzotech.co.in/pdf/Enzotech_Presentation.pdf · Packaged STPs from 5 KLD to 150 KLD...
-
Upload
hoangduong -
Category
Documents
-
view
224 -
download
1
Transcript of Enzotech - STPsenzotech.co.in/pdf/Enzotech_Presentation.pdf · Packaged STPs from 5 KLD to 150 KLD...
Enzotech : a brief intro
� Full fledged manufacturing, marketing and after
sales service facilities for Packaged STPs
� Strong client roster – testimony to efficacy of
Patented technology
� MoD approved
� Packaged STPs from 5 KLD to 150 KLD in FRP
and >150 KLD to 500 KLD in civil construction
� Treatment capacity 1000 L – 1,50,000 L Per Day� Superior & Effective Treatment of sewage
� Minimum sludge generation� No stench
� Low power consumption� Low cost of operation
Key features of Enzotech plants
� Low cost of operation
� Minimum civil work� Compact design – Less space requirement
� Very little operation noise� Treated water quality – Recyclable / Reusable� Quick & easy installation� Low maintenance� Eco-Friendly
Enzotech technologyModified Parallel plate clarifier by Enzotech
(Patented)
• Special High Rate
Clarificator
• Modified parallel plate • Modified parallel plate
clarification with
coagulation &
precipitation with
special polymer or
Electrocoagulation.
The Bio-ballDesign of Bio-ball media
Enzotech Bio-Ball Media – Patent Granted
Media available in market
COMPARISON OF MEDIA CHARACTERISTIC
NAME SIZE SURFACE AREA
VOID RATIO
WEIGHT
Fujino
Spirals
50 mm 350 Sq.m/Cu.m
92 % 110 gm/L
Spirals Sq.m/Cu.m
Enzotech
Bioball
28 mm 550 Sq.m/Cu.m
95 % 27 gm/L
Bio remediation
� Establish Microbiology Lab
� Identification & selection of efficient bacteria for sewage
treatment
� Other seven species of bacteria for production of
enzymes for faster metabolism of waste.enzymes for faster metabolism of waste.
OIL CHEMICALDETERGENT
Bio Filtration
Bio-Media Filtration
(Patented)
�In secondary clarifier, bio-
filtration is done using
floating media. floating media.
Defining Parameters MBR Enzotech - FRP Type
Raw sewage parameters
TSS,mg/l 200 to 250 300 to 350
Comparison of MBR and Enzotech FRP
TSS,mg/l 200 to 250 300 to 350
BOD,mg/l 300 to 400 400 to 500
COD/mg/l 500 to 600 800 to 1000
Treated water
parameters
TSS,mg/l Nil 5 to 10
BOD,mg/l <3 < 10 to<3
COD/mg/l <50 50 to 100
Defining Parameters MBR Enzotech - FRP Type
Sludge handling system
requirement
Sludge production is
more. It needs Belt press
or centrifugal sludge
removal equipment.
Sludge removed by
gravity on sludge bed
Classical treatment
improved for higher
Comparison of MBR and Enzotech FRP
Advantages
Membrane process with
extra pure outlet water
quality for special use,
smaller area requirement.
efficiency to give better
treated water for reuse,
less space and less power
requirement.
Disadvantage
Continuous maintenance
of high MLSS, high
membrane replacement
cost, huge power
requirement, highly
trained operator required.
Chemical cost,
mechanical maintenance
are high
Defining Parameters MBR Enzotech - FRP Type
Installation Electromechanical 6 to 8 weeks
Easy installation 1 to 2
weeks
Below 150 KLD MSEP / RCC FRP
Above 150 KLD RCC RCC
Equalization Min. 8 Hrs Retention Time
Min. 12Hrs Retention Time
Min. 6 Hrs Retention Time,
since high MLSS is Min. 1 to1.5 Hrs Retention
Comparison of MBR and Enzotech FRP
Both have 6 hours total
retention timeBiological Tank
since high MLSS is
maintained
Min. 1 to1.5 Hrs Retention
Time
Secondary Settlers NA Min 2 Hrs Retention time
Filter Feed Tank NA
Min 15 minutes Retention
time
Treated water Tank As per required 12 hrs
Aerobic Digester NA NA
Sand Filter, m3/m2/hr NA 15 to 20
Activated Carbon
filter,m3/m2/hr NA 12 to 15
Softener Input Hardness/ OBR NA
MLSS 8000 mg/l to 12000 mg/l Not required
retention time
Defining Parameters MBR Enzotech - FRP Type
Operation
Fully automated for critical
operations
Easy system operates on its
own with periodical
checks
Manpower Semi skilled, and not on
Comparison of MBR and Enzotech FRP
Manpower
Skilled, not on continuous basis
Semi skilled, and not on
continuous basis
Energy Efficiency
Selection of energy efficient
equipment required Energy efficient
Typical cost in Rs.100 per KLD
sewage treatment
Depends upon membrane
selection 22.5 lakhs
Operating cost per KLD
sewage treatment
(power, chemicals etc. Rs.22 to24 Rs.10 to15
land requirement per 100 KLD
sewage treatment 50 to 65 m2 50 to 65 m2
Defining Parameters MBR Enzotech - FRP Type
Recommended Application
Municipal corp., SEZ, Hotels, IT parks
,Residential projects, ETP etc
Township, Residential projects,
SEZ, Hotels, Hospital ,IT
parks, ETP etc
Comparison of MBR and Enzotech FRP
Design life of media/Membrane 3 to 7 years 15 to 20 years
Automation PLC based operation Not required
Minimum and Maximum
capacities up to 6 MLD STP 10000 liter per day to all size
Availability of spare components
for maintenance
Not readily, involves membranes and
automation Easy