EnvironmEntally sEalEd RF Connector Protective Covers … · Only Glenair offers the complete range...
Transcript of EnvironmEntally sEalEd RF Connector Protective Covers … · Only Glenair offers the complete range...
RF Connector Protective Covers and Accessories
AUGUST 2013
for mil-prf-39012 And oTher mil/Aero rf connecTorS
EnvironmEntally sEalEd
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
2
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
Military standard protective cover and stowage receptacle performance:
• Reliable, robust protection against environmental and mechanical damage
• Wide range of heavy-duty protective cover attachment and lanyard options
• Military standard and high-performance Glenair materials and platings
• Heavy-duty performance for rugged application environments
Radio Frequency Connector Covers and Accessories
Glenair, Inc.1211 Air WayGlendale, CA [email protected]
serIes 65 & 66
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
1
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
Table of Contents
650-072 Dummy stowage receptacle for (Type HN) Coaxial rF Connectors 4
650-073 Dummy stowage receptacle for Type MIL-PrF-39012 (sMA) Coaxial rF Connectors 5
650-074 Dummy stowage receptacle for MIL-PrF-39012 (Type N) Coaxial rF Connectors 6
650-075 Dummy stowage receptacle for Type MIL-PrF-39012 (TNC) Coaxial rF Connectors 7
650-076 Dummy stowage receptacle for Type MIL-PrF-39012 (BNC) Coaxial rF Connectors 8
660-101 Protective Dust Cover for (Type HN) Coaxial rF Plug Connectors 9
660-102 Protective Dust Cover for (Type HN) Coaxial rF receptacle Connectors 10
660-103 Protective Dust Cover for Type MIL-PrF-39012 (sMA) Coaxial rF Plug Connectors 11
660-104 Protective Dust Cover for Type MIL-PrF-39012 (sMA) Coaxial rF receptacle Connectors 12
660-105 Protective Dust Cover for Type MIL-PrF-39012 (Type N) Coaxial rF Plug Connectors 13
660-106 Protective Dust Cover for Type MIL-PrF-39012 (Type N) Coaxial rF receptacle Connectors 14
660-107 Protective Dust Cover for Type MIL-PrF-39012 (Type TNC) Coaxial rF Plug Connectors 15
660-108 Protective Dust Cover for Type MIL-PrF-39012 (Type TNC) Coaxial rF receptacle Connectors 16
660-109 Protective Dust Cover for Type MIL-PrF-39012 (Type BNC) Coaxial rF Plug Connectors 17
660-110 Protective Dust Cover for Type MIL-PrF-39012 (Type BNC) Coaxial rF receptacle Connectors 18
667-127 Protective receptacle Cover and Dummy Plug for MIL-DTL-38999 series II Type BNC rF Coax Connectors 19
RF Coax Connector Protective Covers and AccessoriesTable of Contents
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
2
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
RF Connector Protective Covers and AccessoriesIntroduction
�� Stainless steel wire rope lanyards provide high pull strength, flexibility and durability
�� Sash chain styles lie flat to equipment housings and panels
�� Precision-machined stowage receptacles, and plug and receptacle covers deliver up to 2000 mating/unmating cycles
�� Wide range of mil-spec and commercial plating options ensure appropriate grounding and corrosion protection
Environmental sealing, reliable attachment, and rugged performanceMIL-PrF-39012 rF connectors are used in high-performance military and aerospace applications such as microwave radio, communication base stations, antennas, satellite communications, radar, and rF instrumentation. Proper environmental and mechanical protection of these mission-critical coaxial connectors relies on protective covers and stowage recep-tacles. Only Glenair offers the complete range of these accessories, in-stock and ready for immediate, same-day shipment. All components are precision machined and equipped with customer’s choice of appropriate lanyard and attachment hardware.
From satellite communications to microwave radio systems and base stations, Glenair rF connector protective covers help extend service life and protect valuable equipment
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
3
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
Table I: AttachmentsSym Chain
D Bead Chain, Cres, PassivateS #8 Sash Chain, Cres, Passivate
Sym Wire RopeF Wire Rope, Nylon Jacket
H Wire Rope, Fluoropolymer Jacket
R Wire Rope, PVC JacketT Wire Rope, No Jacket
Sym Fabric RopeG Flexible Nylon Rope
Sym NoneN No Attachment
NB No Lanyard or Attachment Boss
Table III: EyeletDash No. P Dia ±.010 (0.3)
01 .140 (3.6)04 .197 (5.0)06 .125 (3.2)09 .156 (4.0)00 No EyeletWS With StrapSK Slip Knot
SCS Slip/Crimp SleeveCF Crimp Ferrule (Loose)
SPLIT RING - Style CL Dia.
Table V: Style C Ring Diameter
DashNo.
L Dia±.015 (0.4)
52 .485 (12.3)54 .640 (16.3)56 .750 (19.1)58 .890 (22.6)60 1.015 (25.8)
Table IV: Style A Ring Diameter
DashNo.
N Dia±.015 (0.4)
095 .312 (7.9)100 .391 (9.9)101 .516 (13.1)102 .583 (14.8)103 .641 (16.3)105 .766 (19.5)106 .896 (22.2)107 1.016 (25.8)
RF Coax Connector Protective CoversAttachment Selections, Ring and Eyelet Dimensions
A Dia. (Table III)
A Dia. (Table III)
A Dia. (Table III)
WIRE ROPE(Types F, H, R, T)
SASH CHAIN(Type S)
BEAD CHAIN(Type D)
Length + .250 (6.4)
Length + 1 Link
Length + .250 (6.4)
NYLON ROPE(Type G)
SlipKnot
LengthDetermined At.50 Dia
Type SKand SCS
Type WS
CF - Crimp FerruleSupplied Loose
for Wire Rope (S) Only(See Table IV)
Length toEnd of Wir
Type CF
SlipKnot
LengthDetermined At.50 Dia
Type SKand SCS
Type WS
CF - Crimp FerruleSupplied Loose
for Wire Rope (S) Only(See Table IV)
Length toEnd of Wir
Type CF
B Dia.
SOLID RING - Style AEYELET
A Dia.
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
NOTES1. Slip/Crimp Sleeve (SCS) for Type G Nylon Cord only provides “slip knot”
adjustment. May be crimped for permanent attachment.2. Crimp Ferrule (CF) for Type S Wire Rope only. Supplied loose for user
termination.
Rev. 03.10.15
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
4
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
.875 (22.2)
.750-20 UNEF-2A
Ø.125 (3.2) 4 Places
.812 (20.6) SQ
1.093 (27.8) SQ
.125 (3.2)
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
650-072Dummy Stowage Receptaclefor RF Coax Type HN Connectors
650-072 NF
Finish(See Table II)
Basic Number650-072 = Type HN
APPLICATION NOTES
1. Assembly identified with manufacturer’s name and part number, space permitting.
2. Material/Finish - See Table II3. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
5
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
(8.7/8.6)
(2.8/2.3)
(1.9/1.4)
4 Places
SQ .075/.055
.250-36 UNS-2A
.500 (12.7)
.510/.490(13.0/12.4)
SQ
.342/.338
.112/.092 Dia
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
650-073Dummy Stowage Receptacle
for MIL-PRF-39012 RF Coax Type SMA Connectors
650-073 NF
Finish(See Table II)
Basic Number650-073 = Type SMA
APPLICATION NOTES
1. Assembly identified with manufacturer’s name and part number, space permitting.
2. Material/Finish - See Table II3. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
6
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
650-074Dummy Stowage Receptacle
for MIL-PRF-39012 RF Coax Type N Connectors
650-074 NF
Finish(See Table II)
Basic Number650-074 = Type N
Ø.125 (3.2) 4 Places
.718 (18.2) SQ
1.00 (25.4) SQ
.740 (18.8)
.625-24 UNEF-2A
.080 (2.0)
APPLICATION NOTES
1. Assembly identified with manufacturer’s name and part number, space permitting.
2. Material/Finish - See Table II.3. Metric dimensions (mm) are in parentheses.
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
7
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
650-075Dummy Stowage Receptacle
for MIL-PRF-39012 RF Coax Type TNC Connectors
650-075 NF
Finish(See Table II)
Basic Number650-075 = Type TNC
(12.8/12.6)
(3.4/2.9)
(2.4/1.9)
4 Places
SQ .095/.075
.4375-28 UNEF-2A
.80 (20.3) Max
.697/.682(17.7/17.3)
SQ
.505/.495
.135/.115 Dia
APPLICATION NOTES
1. Assembly identified with manufacturer’s name and part number, space permitting.
2. Material/Finish - See Table II.3. Metric dimensions (mm) are in parentheses.
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
8
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
650-076Dummy Stowage Receptacle
for MIL-PRF-39012 RF Coax Type BNC Connectors
650-076 NF
Finish(See Table II)
Basic Number650-076 = Type BNC
Typ(2.4/1.9).095/.075
.382/.378(11.07)/(9.60)
.135/.115 Dia(3.4/2.9)(4 Places)
.505/.495(12.8/12.6)
.697/.682(17.7/17.3) Typ
.80 (20.3)Max
APPLICATION NOTES
1. Assembly identified with manufacturer’s name and part number, space permitting.
2. Material/Finish - See Table II.3. Metric dimensions (mm) are in parentheses.
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
9
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
Gasket
.875 (22.23) Max
.125 (3.18) Max
1.093 (27.76)Max
.750-20 UNEF-2A
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable Page 3See P/N Development
Length ± .13 (3.3)
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
660-101Plug Dust Cover
for RF Coax Type HN Connectors
660-101 NF G 01 - 2
Finish(See Table II)
Basic Number660-101 = Type HN
Attachment(See Table I,
page 3)
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
III
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
10
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
660-102Receptacle Dust Cover
for RF Coax Type HN Connectors
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable Page 3
.750-20 UNEF-2B
.875 (4.73) Max
.125 (3.18) Max
See P/N DevelopmentLength ± .13 (3.3)
1.093(27.76)
Max
Gasket
660-102 NF G 01 - 2
Finish(See Table II)
Basic Number660-102 = Type HN
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
III
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
11
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
Gasket
.500 (12.7) Max
.410 (10.4)Max
.250-36 UNS-2A
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Length ±.13 (3.3)See P/n Development
Ø ATable Page 3
.220 (5.59)Max
660-103Plug Dust Cover
for MIL-PRF-39012 RF Coax Type SMA Connectors
660-103 NF G 01 - 2
Finish(See Table II)
Basic Number660-103 = Series SMA
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
III
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
12
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
660-104Receptacle Dust Cover
for MIL-PRF-39012 RF Coax Series SMA Connectors
.410 (10.4) Max
.500 (12.7) Max.250-36 UNS-2B
.220 (5.59)Min
Gasket
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable IVPage 3See P/N Development
Length ± .13 (3.3)
660-104 NF G 01 - 2
Finish(See Table II)
Basic Number660-104 = Series SMA
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
III
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
13
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
660-105Plug Dust Cover
for MIL-PRF-39012 RF Coax Type N Connectors
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable IVPage 3See P/N Development
Length ± .13 (3.3)
Gasket
.740 (18.80) Max.080 (2.03) Max
1.000(25.4)Max
.625-24 UNEF-2A
660-105 NF G 01 - 2
Finish(See Table II)
Basic Number660-105 = Type N
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
III
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
14
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
660-106Receptacle Dust Cover
for MIL-PRF-39012 RF Coax Type N Connectors
.625-24UNEF-2B
.740 (18.80) Max
.080 (2.03) Max
1.000(25.4)Max
Gasket
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable IVPage 3See P/N Development
Length ± .13 (3.3)
660-106 NF G 01 - 2
Finish(See Table II)
Basic Number660-106 = Type N
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
III
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
15
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
660-107Plug Dust Cover
for MIL-PRF-39012 RF Coax Series TNC Connectors
Gasket
.700 (17.8) Max
.590(15.0)Max
.4375-28 UNEF-2A
.420 (10.67)Max
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable IVPage 3See P/N Development
Length ± .13 (3.3)
660-107 NF G 01 - 2
Finish(See Table II)
Basic Number660-107 = Series TNC
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
III
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
16
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
660-108Receptacle Dust Cover
for MIL-PRF-39012 RF Coax Type TNC Connectors
.590(14.99) Max
.700 (17.78) Max.4375-28
UNEF 2-B .420 (10.67)Min
Gasket
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable IVPage 3See P/N Development
Length ± .13 (3.3)
660-108 NF G 01 - 2
Finish(See Table II)
Basic Number660-108 = Series TNC
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
III
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
17
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies
660-109Plug Dust Cover
for MIL-PRF-39012 Type BNC Male RF Coax Connectors
Knurl Style Mfr Option
.590(14.99)
Max
.382(9.70)Max
.640 (16.26) Max
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable IVPage 3See P/N Development
Length ± .13 (3.3)
660-109 NF G 01 - 2
Finish(See Table II)
Basic Number660-109 = Type BNC
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Material and Finishes:rivets, bayonet pins – Cres/PassivateGaskets – silicone or neoprene/N.A.Attachments – see page 3Covers – Aluminum alloy, brass, stainless steel/see Table II below for finishesCrimp rings and eyelets – Cres/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
electroless Nickel
MT Nickel Teflon
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 stainless steel Passivate
BMBrass
Brass - electroless Nickel
WB White Bronze (Non-Magnetic)
III
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
18
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
660-110Receptacle Dust Cover
for MIL-PRF-39012 Type BNC RF Coax Connectors
660-110 NF G 01 - 2
Finish(See Table II)
Basic Number660-110 = Type BNC
Attachment(See Table I,
page 3)
Attachment Length(In Inches)
Recommended Length = 2.0 Inches
Knurl StyleMfr Option
.560(14.22)
Max
.810 (20.57) MaxGasket
Lug TerminationDash No -02 Thru -160
(See Table IV, Page 3)
Ø ATable IVPage 3See P/N Development
Length ± .13 (3.3)
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
III
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
APPLICATION NOTES1. Assembly identified with manufacturer’s name and part number, space permitting.2. Attachment to withstand 25 Lb. pull test.3. A = Maximum diameter over which mandrel will rotate freely (see Table IV, page 3). 4. Metric dimensions (mm) are in parentheses.
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
19
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF Co
nnec
tor
Cove
rs an
d Acce
ssor
ies667-127Special Protective Receptacle Cover and Dummy Plugfor MIL-DTL-38999 Series II and Type BNC RF Coax Connectors
Mates with MIL-DTL-39012 BNC RF Coax Connectors
3.00 ±.250(76.2 ± 13.2)AttachmentLength
1.750(44.5)Max
Mates withMIL-DTL-38999Series IIShell Size 24Connector
1.180 (30.0) Max
.382 (9.7)Max
Mates withMIL-DTL-39012 (BNC)Coax ConnectorMIL-DTL-39012/16 Ref.
Attachment TypeTable I, Page 3
BasicNumber
Finish(SeeTable II)
667-127 NF - R 6 - 01
AttachmentLength
(In Inches)
Material and Finishes:Gaskets – Silicone or neoprene/N.A.Attachments – See page 3Covers – Aluminum alloy, brass, stainless steel/See Table II below for finishesCrimp Rings and Eyelets – CRES/passivate
Composite and other materials and finishes available. Please consult factory
Table II: Materials and FinishesCode Material Finish
MAluminum Alloy
6061-T6
Electroless Nickel
MT Nickel Fluoropolymer
NF Cadmium, Olive Drab
ZR Zinc-Nickel, Black
Z1 303 Stainless Steel Passivate
BMBrass
Brass - Electroless Nickel
WB White Bronze (Non-Magnetic)
Eyelet / Ring Type and Size
(See Tables III, IV and V, page 3)
SPLIT RING - Style CL Dia. Table V Page 3
B Dia. Table IV Page 3
SOLID RING - Style A
www.glenair.com E-Mail: [email protected], INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
20
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
RF ConnectorCovers and Accessories
Also Available from Glenair:MIL-DTL-55116 Type
High-Performance Audio/Radio Connectors
series 151 (standard) and 152 (advanced performance) MIL-DTL-55116 Type audio connectors are designed for high-reliability, severe environment radio communications equipment. They are available in both 5 pin and 6 pin configurations, with either crimp sleeve or solder cup pogo pin terminals. All feature versatile wire strain relief to protect cable conductors from damage. shells are made of passivated stainless steel, contacts are gold plated copper alloy. Plug connector contacts are sealed in the unmated condition.
Mil-dtl-55116 type audio connectors for high-reliability, mission-critical communication systems—now available with advanced performance features including size/weight reduction and improved sealing
MIL-DTL-55116 SpecificationsCurrent rating 5 AMPsDWV 500 VAC sea level, high altitude 300 VACInsulation resistance 1000 megohms minimumOperating Temperature -55° C. to +85° C.Contact resistance 0.050 ohms maximumWater Immersion, Mated 6 ft, 48 hrs, mated condition, no leakageWater Ingress, Mated Ingress protection 67Durability 3000 cycles of mating
�� IAW MIL-DTL-55116
�� Advanced performance versions include improved sealing, package size reduction, and lightweight material options
�� Overmolded cordsets
�� Fully intermateable and intermountable with all industry-standard MIL-DTL-55116 connectors
MIL-DTL-55116 Audio Connectors
MIL-DTL-55116 Type Audio Plug, Field Serviceable with Wire Strain Relief
MIL-DTL-55116 Type Molded Audio Plug
MIL-DTL-55116 Type Audio Receptacle,
Jam Nut Panel Mount
MIL-DTL-55116 Type In-Line Audio
Receptacle with Wire Strain Relief
Connector Type Contact Type
Contact Layout
MIL SPEC Slash Sheet
IAW MIL-DTL-55116
Glenair High Performance Mates with
Cable Plug, with strain relief
U-229
Crimp5 M55116/1 151-001-1 152-001-1 151-003-1, 151-004-1, 151-004-36 M55116/2 151-001-2 152-001-2 151-003-2, 151-004-2, 151-004-4
solder5 M55116/3 151-001-3 152-001-3 151-003-1, 151-004-1, 151-004-36 M55116/4 151-001-4 152-001-4 151-003-2, 151-004-2, 151-004-4
Cable Plug, MoldedU-182
Crimp5 M55116/5 151-002-1 152-002-1 151-003-1, 151-004-1, 151-004-36 M55116/6 151-002-2 152-002-2 151-003-2, 151-004-2, 151-004-4
solder5 M55116/7 151-002-3 152-002-3 151-003-1, 151-004-1, 151-004-36 M55116/8 151-002-4 152-002-4 151-003-2, 151-004-2, 151-004-4
receptacle, Jam NutU-183
solder5 M55116/9 151-003-1 152-003-1 151-001-1, 151-001-3, 151-002-1, 151-002-36 M55116/10 151-003-2 152-003-2 151-001-2, 151-001-4, 151-002-2, 151-002-4
In-Line receptacleU-228
Crimp5 M55116/11 151-004-1 152-004-1 151-001-1, 151-001-3, 151-002-1, 151-002-36 M55116/12 151-004-2 152-004-2 151-001-2, 151-001-4, 151-002-2, 151-002-4
solder5 M55116/13 151-004-3 152-004-3 151-001-1, 151-001-3, 151-002-1, 151-002-36 M55116/14 151-004-4 152-004-4 151-001-2, 151-001-4, 151-002-2, 151-002-4
high-peRFoRmAnCe CoAxiAl CAbleMil-C-17 QPl and commercial
Glenair high-performance Coax cables are constructed with silver plated conductors, insulated with fluoropolymer material, and finished with single or double layers of conductive shielding and appropriate jacket. Ideally suited for
demanding military and commercial aerospace applications, these cables offer stable, predictable electrical performance under rugged mechanical and environmental conditions including repeated flexing, abrasion abuse, vibration, extreme temperatures, and exposure to aerospace fluids and chemicals. Glenair cable and contact engineers are available to review specific program requirements including environmental challenges, frequency requirements, loss budget, VsWr, and so on to select the most appropriate cable for every application.
Glenair, Inc.1211 Air WayGlendale, CA [email protected]
serIes 962
Also Available: High-Performance Coax Contacts for use in Multi-Pin Connectors
Coax Pin Coax socket
Glenair, Inc.1211 Air Way • Glendale, California • 91201-2497
Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected]
Telephone:+44-1623-638100
Facsimile:+44-1623-638111
Glenair UK Ltd40 Lower Oakham WayOakham Business ParkP.O. Box 37, MansfieldNotts, NG18 5BY england
Telephone:06172 / 68 16 0
Facsimile:06172 / 68 16 90
Glenair Electric GmbHschaberweg 2861348 Bad HomburgGermany
Telephone:+33-5-34-40-97-40
Facsimile:+33-5-61-47-86-10
Glenair France SARL7, Avenue ParmentierImmeuble Central Parc #231200 ToulouseFrance
Telephone:847-679-8833
Facsimile:847-679-8849
Glenair Microway Systems7000 North Lawndale AvenueLincolnwood, IL60712
Telephone:+46-8-50550000
Facsimile:[email protected]
Glenair Nordic ABGustav III : s Boulevard 46s - 169 27 solnasweden
© 2013 Glenair, Inc. Printed in U.s.A.
Telephone:+34-925-89-29-88
Facsimile:+34-925-89-29-87
Glenair IbericaC/ La Vega, 1645612 Veladaspain
Telephone:203-741-1115
Facsimile:203-741-0053
Glenair Power Products Group860 N. Main street extensionWallingford, CT 06492
Telephone: +39-051-782811
Facsimile:+39-051-782259
Glenair Italia S.p.A.Via Del Lavoro, 7 40057 Quarto Inferiore – Granarolo dell’emiliaBologna, Italy
INTERCONNECT SOLUTIONS
Out of This WorldOut of This World