Environmental Sensor Box · 2016-07-15 · IPM-ESB 1 Environmental Sensor Box Connecting with...
Transcript of Environmental Sensor Box · 2016-07-15 · IPM-ESB 1 Environmental Sensor Box Connecting with...
IPM-ESB
1
Environmental Sensor Box
Connecting with Switched IP Power Manager (IPM)
The ESB (Environmental Sensor Box) is a monitoring device that allows you to remotely
monitor the temperature, humidity. PLANET Switched IP Power Manager (IPM) is
equipped with a console port for connecting to an environmental sensor box (ESB).
Temperature and humidity sensors may be added to control the power switch by
monitoring the environmental changes. When the temperature and humidity reach the
customizable minimum/maximum thresholds set, you will be notified via SMS and e-mail.
• Measurement range: 0 – 40°C (temperature); 0 – 95% RH
(humidity)
• Measurement accuracy: +/- 0.1°C (temperature); +/- 2% RH
(humidity)
• Off-line monitor
• Naming support for ESB port
• Connect to Switched IPM over RJ11 cable
• User selectable alarm thresholds allow you to define
acceptable temperature or humidity limits
• Comprehensive environmental management and flexible
configuration via Web browser
• Automatic events notification via E-mail and SNMP trap
• Regularly records ESB parameters for statistic analysis and
event diagnostics
• Quick and easy installation (hot-swappable)
Remote Management via Network
PLANET Switched IP Power Manager consolidates power control, current monitoring, temperature and humidity monitoring with environmental sensor box
(IPM-ESB), web page management, message, e-mail, and SNMP functions together to enable MIS staff to be informed and thereby to remotely deal with the
relevant problems through Internet.
Applications
ESB
SMS
Switched IPM
Internet Switched IPM
Power Line (AC)AC
100BASE-TX UTP
Telephone wire
ServerPCWeb Management
AC AC8 Power Outlets IPM-ESB
%
IPM-ESBPLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved.
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)Tel: 886-2-2219-9518 Fax: 886-2-2219-9528Email: [email protected] www.planet.com.tw
PLANET Technology Corporation
IPM-ESB
2
SpecificationsProduct IPM-ESBHardware SpecificationsSensor Port 1 x RJ11 type, 6PLED 1 x Power/Status LEDHousing PlasticDimensions (W x D x H) 57 x 47.5 x 26.5 mm Weight 43gCable Length 1.4 metersMeasurement
Range Temperature: 0 - 40°CHumidity: 0– 95% RH
Accuracy Temperature: +/- 0.1°CHumidity: +/- 2 % RH
Response Time 2 secondsEnvironmentsOperating Temperature 0 ~ 40 degrees COperating Humidity 0 ~ 95%
Related ProductsIPM-4220 IP-based 4-port Switched Power Manager (AC 100-240V, 16A max.)IPM-8220 IP-based 8-port Switched Power Manager (AC 100-240V, 16A max.)
IPM-ESB Environmental Sensor Box
Ordering Information