19-0414 GSM Power Control - Direktronik · 19-0414 19-0414 NOTE remove PIN code check on the SIM card
ENTRON Weld Control Options and Accessoriesresistanceweldsupplies.com/.../780077-0414.pdf ·...
Transcript of ENTRON Weld Control Options and Accessoriesresistanceweldsupplies.com/.../780077-0414.pdf ·...
NETWORKING COMPONENTSENTRON Weld Control Options and Accessories
S485/U485
485
SERIES
Plugs andCable
EN1000/EN1001 Weld Controls With RS485can communicate with RT4jrs or ENLINK 1000/1001 or USER programmedPLCs to upload, download, store, retrieve and monitor weld schedules.
Windows Based Softwareand Personal Computers runningENLINK 1000/1001 with RS232/RS485converters may be used as masterdevices to communicate with EN1000Series Controls to upload, download,store, retrieve, monitor and backup weldschedules.
REMOTE TERMINAL RS485can communicate with weld controlgroups to program weld controlparameters at convenient locations.
RS232 to RS485 OPTION/USB to RS485 OPTIONInterfaces from RS232 or USB to RS485are provide for simple interface to USERprovided PCs or PLCs.
Plugs and Cableand components to complete the ENBUSnetwork are available.
RS485 OPTIONis available to retrofit EN1000 SeriesWeld Controls allowing use of existingweld controls on ENBUS.
ENLINK 1000/1001 is used with EN1000 and EN1001 Controls.ENLINK 1000/1001 CASCADE is used with EN1000 Cascade and EN1001 Cascade Controls.
J
780077-0414
OROROROROR
OROROROROR
RS232 to 485Converter
RT4jr.(Remote Terminal
Junior RS485)
Desktop Computer
Laptop Computer
More Infor
ORORORORORENLINK 1000/1001 (non-cascade standard controls) and ENLINK 1000/1001 CASCADE (cascade weld controls) may not coexist on the same bus. Only oneComputer may exist at one time on the ENLINK Bus. Multiple RT4jrs may be strategically placed to control work groups on the ENLINK Bus.
EN1000 CASCADET CAB
EN1000 CASCADEU CAB
EN1000 CASCADED CAB
RS485 2-wire ENBUS Up to 1 mile in length OROROROROR
EN1000 E CAB
EN1001S CAB
EN1001T CAB
RS485 2-wire ENBUS Up to 1 mile in length
RS485OPTION
Provides interface for allWeld Controls to ENBUS
Weld ControlsRequire
RS485OPTION
Provides interface for allWeld Controls to ENBUS
Weld ControlsRequire
LET SIMPLE NETWLET SIMPLE NETWLET SIMPLE NETWLET SIMPLE NETWLET SIMPLE NETWORKING PUT CONTRORKING PUT CONTRORKING PUT CONTRORKING PUT CONTRORKING PUT CONTROLOLOLOLOLWHEREWHEREWHEREWHEREWHERE YYYYYOU NEED IT !OU NEED IT !OU NEED IT !OU NEED IT !OU NEED IT !
RRRRRT4jrT4jrT4jrT4jrT4jr..... CONTR CONTR CONTR CONTR CONTROLS put CONTR
OLS put CONTR
OLS put CONTR
OLS put CONTR
OLS put CONTROL wOL wOL wOL wOL wherherherherhere ye ye ye ye you need it
ou need it
ou need it
ou need it
ou need it ! ! ! ! !
A Personal Computer with a RS232 to RS485 converter and ENLINK 1000/1001 may be used as a master device to communicate with EN1000 SeriesWeld Controls with RS485 OPTIONS. Communications on the 2 wire bus is governed by a simple non-proprietary protocol. Up to 64 Weld Controlsmay be connected to the ENBUS bus along with 32 RT4jrs and 1 Computer. Through this network, ENLINK 1000/1001 can download, upload, store oredit weld schedule data. ENLINK 1000/1001s weld control error status monitoring and weld data history logging can be used for statistical analysis.
MEMBER
7
RS48
5 2-w
ire E
NBUS
Up to
1 mi
le in
length
Distributed by:
www.resistanceweldsupplies.com
888-654-WELD (9353)[email protected]
PRODUCTION ENGINEERING1344 Woodman DriDayton, Ohio 45432