Enhance your space with high performance LED illumination · Enhance your space with high...
Transcript of Enhance your space with high performance LED illumination · Enhance your space with high...
Enhance your space with high performance LED illumination
High performance LED Floodlighting series
featuring LEDGINE technology
www.philips.com/luminaires2
Precision optical control
LPF’s complete array of optical distributions range from a tight spot to a wide architectural flood, to
give you the tools to design and paint with light to meet the needs of your specific application. This high
performance luminaire is ideal for a wide range of applications including accent, landscape, facade, wall
washing, column accenting, etc. Whatever architectural features you wish to highlight, the LPF has the tools
to enhance your space with light.
LytePro LED Floodlighting (LPF) Series
Spot ‘SP’
50% Main Beam: 18°H x 18°V 10% Field Beam: 35°H x 34°V
This tight and highly concentrated beam is ideal for targeted
illumination at large distances such as fl ag poles, columns and accenting
of specifc architectural details or elements.
Narrow Beam Flood ‘NBF’
50% Main Beam: 34°H x 34°V 10% Field Beam: 92°H x 92°V
This symmetrical narrow beam flood is ideal for targeted and
accent illumination at medium range distances and applications that
require additional coverage that the spot cannot address.
Medium Beam Flood ‘MBF’
50% Main Beam: 72°H x 65°V 10% Field Beam: 102°H x 102°V
This medium flood with its additional horizontal spread is ideal for basic
wall washing and general illumination, and can also accent larger objects
while creating dramatic effects by shadowing and contrasting details.
Wide Beam Flood ‘WBF2’ (79° H x 121° V 50% beam)50% Main Beam: 79°H x 121°V 10% Field Beam: 99°H x 135°V
This wide beam flood with an even greater enhanced vertical beam
is ideal for multi-story building fl oodlighting, large monuments, and
highlighting broad landscape elements.
Horizontal Beam Flood ‘HBF’
50% Main Beam: 115°H x 81°V 10% Field Beam: 128°H x 101°V
This horizontal beam flood with its wide rectangular distribution is ideally
suited for large wall washing and general illumination areas where spacing
and uniformity are key.
Wide Beam Flood ‘WBF1’ (77° H x 97° V 50 % beam)50% Main Beam: 77°H x 97°V 10% Field Beam: 99°H x 110°V
This wide beam flood with an enhanced vertical beam is ideal for a
multitude of general purpose illumination and effects from short to
medium setbacks, including wall grazing and accent.
LPF Series is a high performance flood solution featuring a simple, geometric design, making it the perfect
addition to the LytePro family. LPF offers six unique flood optics and four lumen packages to provide
design solutions equivalent to traditional 70-250W HID luminaires. LPF provides up to 56% energy savings
over floodlights using traditional HID sources.1 For additional energy savings during off-peak hours, LPF is
compatible with Philips Dynadimmer, a smart standalone control system offering three pre-programmed
dimming profiles and a customizable option that can be tailored to your specific application.
Note: Shaded orange 50% Main Beams and shaded green 10% Field Beams are for visual reference only and are not
to scale as beams may vary by LED array and driver. Beam angles shown are for reference only and may vary by LED
array and driver choice. Please see spec sheet for specific optical data and beam information. For questions, contact
factory for application engineering assistance.
Represents the 50% main beam.
Represents the 10% field beam.
50%
50%
50%
50%
50%
1 Comparison is based on LPF-80G1-530 and a standard 250W PSMH luminaire performance.
50%
50%
50%
www.philips.com/luminaires 3
HID System
Initial Delivered Lumens
(Initial, 51% eff.)
HID System Wattage
LPFSystem Equivalent
Initial Delivered Lumens (Initial)
LPF System Wattage
LED Savings
70W PSMH 2,958 90 LPF-32G1-530-SP 4,486 50 44%
100W PSMH 4,182 130 LPF-32G1-700-SP 5,985 70 46%
150W PSMH 6,120 185 LPF-80G1-350-SP 7,722 89 52%
250W PSMH 10,455 290 LPF-80G1-530-SP 11,693 127 56%
Energy Savings Potential LED vs HID Comparison Chart
LED optics are extremely efficient in utilizing delivered lumens
according to task, and eliminating wasted light. This translates
to significant energy savings compared to traditional HID
floodlight solutions. Thanks to the LPF’s extremely efficient
optical system, we are able to meet or exceed task lumens
while reducing energy consumption by as much as 56%.1
Our innovative passthrough convective cooling system with its
IP66 thermal pod assembly and vented housing design creates
a vortex of airflow by pulling cold air in while extracting
hot air out. Maximizing this air flow ensures optimum LED
performance, system life and longevity. We are able to achieve
a minimum rated system life of the LEDs and driver up to
80,000 hours at ambient temperatures up to 40°C (104°F).
Predicted L70 LED life can reach as high as 136,000 hours.
LPF features a fully field adjustable die-cast aluminum mastfitter that
can be tilted in 2° increments from 195° to -15°. A durable locking
mechanism secures the LPF in its proper position. The mastfitter is
suitable to mount to any 2-3/8” O.D. vertical tenon (2” pipe), and
is equipped with an internal UL splice box with a gasketed access
chamber for ease of installation, eliminating the need for a secondary
junction box.
For added versatility, LPF also offers pole and wall mount accessories.
Innovative thermal management design
achieves 80,000 hour rated system life
IP66 Rated Construction Flexible aiming options
The LED electrical components are located in a separate,
completely sealed IP66 driver compartment. This helps to
separate heat sensitive elments to extend fixture life, but also
helps to ensure the integrity of the optical performance by
not having to disturb the IP66 optical assembly during any
routine driver maintnenance.
Performance and longevity is a result of how well you protect
your optics and how well it can withstand what man and
mother nature throws its way. The LEDGINE pod and optical
assembly seals directly to the doorframe to create a dedicated
IP66 optical chamber to ensure that dust and moisture will
never compromise performance over the life of the product.
The housing becomes a decorative element that also
promotes our unique thermal management system.
Note: The above comparison is based on initial lumens. HID values will vary by lamp manufacture. Always consult the most current data
sheets for actual performance values.
Adjustable markers help guide the
mastfitter to its proper position
-15°195°
LPF’s vortex of airflow simulation
Top View Side View
Weight: 30.4 lbs 13.8 kgsEPA: 3.08 sq ft
DimensionsTechnical data
Specifi cations
LPF-1A-WBF11,2 LPF-1B-WBF11,2
Total system watts 50 70
Initial lumens @ 25º C ambient 4588 6121
Lumens per watt @ 25º C ambient 92 87
Initial lumens @ 40º C ambient 4441 5986
Lumens per watt @ 40º C ambient 89 86
LPF-1C-WBF11,2 LPF-1D-WBF11,2
Total system watts 89 127
Initial lumens @ 25º C ambient 7897 11958
Lumens per watt @ 25º C ambient 89 94
Initial lumens @ 40º C ambient 7732 11576
Lumens per watt @ 40º C ambient 87 913.0”
7.62 cm
9.88”25.08 cm
17.2”43.6 cm
Photocell button
3.0”7.62 cm
30.23”76.8 cm
4.3”10.9 cm
Mounting Voltage# of LEDs-Engine DistributionSeries
Accessories (Must be ordered separately)
Finish Options LED Color
Ordering Guide
LPF
1A 32 LEDs @ 530
1B 32 LEDs @ 700
1C 80 LEDs @ 350
1D 80 LEDs @ 530
NWNeutral
White
4000K
SP
NBF
MBF
WBF1
WBF2
HBF
Spot (18.4 x 17.9)
Narrow Beam Flood (33.8 x 33.8)
Medium Beam Flood(72.2 x 65.2)
Wide Beam Flood #1(77.3 x 96.8)
Wide Beam Flood #2(79.4 x 121.1)
Horizontal Beam Flood (115.1 x 81.4)
MA2 F12 DS255
TPG
TGRTSA
TWHTTGNTDB
TBKRAL(*)
Textured Philips Gray
Textured Gray
Textured Satin Aluminum
Textured White
Textured Green
Textured Dark Bronze
Textured Black
Custom Color (specify RAL #)
Flood Mastfitter Mount
Single Fusing(120, 277, 347V) DS505
F22 DS755
Double Fusing(208, 240, 480V)
Dynadimmer
Safety profile
F32 DM255
Double Fusing(208, 240, 480V)
Canadian Double Pull
DM505
DM755
PCB2,3 Dynadimmer
Median profilePhotocontrol Button DE255
DD4 DE505
Dimming
Driver DE755
DCP5Dynadimmer Economy profile
Dynadimmer Custom Programming
Notes:
1) ‘UNV’ universal voltage, 120-277 V.
2) Specify voltage. Fusing not available with ‘UNV’ voltage option.
3) ‘PCB’ option not available in 480 V.
4) 0-10V leads exiting luminaire arm supplied for connection to external secondary controls (by others).
5) Dynadimmer options & accessories only available in
120-277 V.
6) LPF is compatible with a wide range of non- programmable and programmable occupancy sensors, wireless controls and asset management systems (by others). Contact factory.
F1-KIT Single Inline Fuse Kit 120, 277, 347V
F2-KIT Double Inline Fuse Kit 208, 240, 480V
F3-KIT Double Inline Fuse Kit 208, 240, 480V Canadian
Double Pull
SG-LPF1 Stone Guard
DYN-KIT1 Dynadimmer USB Cable Kit
(for field programming)
DYN-KIT2 Dynadimmer Handheld
Programmer Kit
(for field programming)
PTA-2180-16.5-(F) Pole Top Adaptor, 2@180
PTA-2090-16.5-(F) Pole Top Adaptor, 2@90
PTA-3090-16.5-(F) Pole Top Adaptor, 3@90
PTA-4090-16.5-(F) Pole Top Adaptor, 4@90
WMB-16.5-(F) Wall Mounting Bracket
1. Technical data and performance are subject to change.2. Due to LED forward voltage variations and driver eff iciency, total system watts may vary +/-5%.
Pblead-free
RoHS2002/95/EC
(F=Specify Finish)
Rated System Life: Driver and LED life are rated up to 80,000 hrs @ 40°C (104°F).
Predicted L70 LED Life: See spec sheet for predicted L70 LED life.
Construction: Die-cast aluminum housing with corrosion resistant hardware. LPF-32G1 and 80G1 have 22” optical opening. Optic chamber and separate driver housing constructed to IP66. Die-cast aluminum heatsink allows for long life of LEDs up to 40°C ambient.
Thermal Management: IP66 rated thermal Pod frame management system creates a vortex of airf low with passthrough convective cooling system and heat extraction.
Driver: High efficiency multi-volt driver (50 or 60 Hz), maintains constant current flow to LEDs to accommodate LED variations. High power factor (>90% standard). Constant current: 350, 530 or 700 mA.
Voltage: 120-277, 480. Temperature range: -40°C (-40°F) to 40°C (104°F). Open / short circuit protection. RoHS compliant. Surge protector standard. The surge protector is in accordance with IEEE / ANSI C62.41.2 guidelines, with a surge current rating of 10,000 amps.
LED and Board Array: 32 or 80 Rebel ES LEDs. Color temperature: Neutral White 4000K +/- 250K; CRI ≥ 60. Metal core printed circuit board. RoHS compliant.
LED Optical System: SP - Spot Beam, NBF - Narrow Beam, MBF - Medium Beam, WBF1 - Wide Beam #1, WBF2 - Wide Beam #2, and HBF - Horizontal Beam distributions. See optical data for details. Fully gasketed Dust-Tite construction. Employs Philips LEDGINE technology & Rebel ES LEDs.
Mounting: Die-cast mastfitter (MA2) is vertically adjustable, suitable for mounting to a 2-3/8” O.D. vertical tenon. Mastfitter features cast-in aiming calibrations and an internal splice box with gasketed access cover.
Finish: TDB - Textured Dark Bronze, TSA - Textured Satin Aluminum, TPG - Textured Philips Gray, TGR - Textured Gray, TWHT - Textured White, TBK - Textured Black, and TGN - Textured Green.
Warranty: Mechanical, f inish and LED engine & components shall be covered by a limited 5-year warranty.
Listings: ETL/cETL Listed luminaire, to the UL 1598 standard, suitable for Wet Locations. Suitable for use in ambients from -40° to 40°C (-40° to 104°F).
PSt-1304BR 04/13
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.Specifications are subject to change without notice.www.philips.com/luminaires
Philips Lighting Company200 Franklin Square Drive Somerset, NJ 08873Phone: 855-486-2216
Philips Lighting Company281 Hillmount Road Markham ON, Canada L6C 2S3Phone: 800-668-9008
1 120
2 208
3 240
4 277
5 480
8 UNV1,2