TAHIR HUSSAIN Instrumentation & Control Engineer

Mobile: 059 498 4060E-MAIL: engr.tahir12@gmail.com

Personal Information’sFather Name: Muhammad Hussain Passport no: TA6893651Date of Birth: 03 March 1987Nationality: PakistaniReligion: IslamGender: MalePosition: Instrumentation & Control Engineer Experience: 5 Years Iqama Number: 2385723461Iqama Status: Available and Transferable Current Location: Jeddah KSA

Technical SummaryDedicated Instrumentation & Control Engineer having about five years of experience in Instrumentation, Control and MEP works. Training experience in Oil and Gas Companies. Having Post Graduate Diploma in Instrumentation and Control Systems and Managing Safety certificate with excellent technical, analytical, communication skills and ability to work in multinational and national organization which offers a professional working environment.Instrumentation & Control: Sizing calculation of Orifice plates and control valves, flow calculation. P&IDs reading, designing of Instrumentation loop diagrams, Logic diagrams, Control narratives, Construction scope of work, Bill of material, interconnection wiring diagrams, DCS input/output list, wiring reports for junction boxes and marshalling cabinets from front end engineering package (FEEP). Calibration of Temperature, Pressure, Level and Flow instruments, Level Switches etc.

Professional Experience

ICEM Jeddah, Saudi ArabiaInstrumentation, Control and Equipment MaintenanceFeb, 2015-Present Position: I&C Engineer

Responsibilities:

Sizing and calculation of Orifice plates Sizing and calculation of safety relief valves Flow calculations for different types of fluids Designing of Construction scope of work from FEEP narrative Designing of control narrative, Instrument index from FEEP narrative Designing of Logic diagrams through control narratives Designing, Implementing and Commissioning of new instrument control loops as per site

requirements.

Designing of wiring report for junction boxes and marshalling cabinets Review of control philosophy, P&I diagrams Designing of Control Loop diagrams, DCS input/output list Instruments list, flow chart, Cable schedules, Bill of materials Developing & analysing P&IDs, Loop diagrams Selection of instruments through Junction boxes to marshalling panel’s layout design. Designing of Instrumentation location layout. Supervised field technicians during system installation. Calibration of All field instruments, Pressure transmitters, Pressure gauges, Temperature

Transmitters, Level Switches, Level transmitters. Calibration and testing using Fluke 754/744, GE druck DBC 650, HART Communicator 475

and Pressure/ Differential modules etc.

Instrumentation & Control Projects

1. Project title: Aldehyde vent reduction (SABIC)Project description: The Glycol unit 20 & 220 in the site produced Aldehyde as by product. The scope of the project to cover both Glycol Units 20 & 220 to divert atmospheric vent of the aldehyde to the Incinerator or/and Polymer operating flare or to the waste water system.

2. Project title: Fire water pumps Testing

Project description: Saline Water Conversation Corporation (SWCC) Al Jubail Plant has Five Fire Water Pumps in Phase 2, C7 Area 75: Three Electric Fire Water Pumps and Two Diesel Fire Pumps. Malath Cooperative Insurance has requested from ICEM to conduct a performance test of all the five pumps according to NFPA 25 standard

The following inspection checklists and tests were performed: Inspection Checklist Calibration Checks Safety Interlock and Alarm Test No Flow Condition Test Flow Condition Test using different methods

3. Project title: Oil water separator for ethylene Plant Project description: The Oil and Water (OWS) in Saudi Petrochemical Company (SADAF) an affiliate of SABIC, Ethylene production plant is designed to collect both storm water as well as oily water. Storm water, during cleaning and raining, joins the OWS system and goes to CPI to prevent reoccurrence backflow and/or overflow from the manhole covers as occurred in past accident (the OWS near furnaces overflow causing the oil flood underneath the operating furnaces in ethylene Plant).

Responsibilities:

Prepare construction scope of work from FEEP narrative Designing of Logic diagrams, instrument control loop diagrams for DCS/LCP Prepare junction box & marshalling panel wiring reports Prepare wiring schedule for junction boxes Control narrative from logic diagrams Instrument index DCS inputs/outputs List

DESCON Engineering Contractors Position: Electrical Site EngineerDuties & Responsibilities:

Supervise the works of MEP installations at construction sites. Monitor and check the installations of MEP works performed at site to ensure their adherence to

the drawings and specifications Handle the site activities, development reports and update the senior MEP Engineers regarding the

same. Liaise with the Senior MEP engineers/MEP coordinator regarding any site issue and address in

coordination with them. Raise MEP works Inspection Requests (RFI’s) to the Consultant and get their approval on site

works as per the Contract and normal procedures. Make sure that the labors at site are being utilized up to the optimum level during the site working

hours. Attend meeting with main contractors for Progressing of works and meeting the deadline. Also

report to senior MEP engineers. Engaged in Erection & Testing of cable, Insulation, Ducting & Pipe lines as Per Approved

drawings. Responsible for Execution and Supervision of Utilities Work. Ensuring that Standards are met in order to get customer satisfaction. Extensive knowledge of safety and health standards, industrial operations, and control methods. Perform process & personal safety procedure audits, identify discrepancies, and derive connections

as needed. Maintaining site safety by regular review and update of health and safety standards. Safe work methodology in confined space, Electrical monitoring Systems. Ability to prioritize, multi task & team building skills. Outstanding time management skills for completing projects

Training Experience1. Ministry of Petroleum and Natural Resources, Pakistan

1 year training at Ministry of Petroleum and Natural Resources (MP&NR) Policy wing as assistant to Deputy Director (Liquefied Gases) , Islamabad, Pakistan

Liquefied Petroleum Gas (LG) Department. Maintenance of record of production of different companies Assist Director (LG) to write copy Gather data about different LPG multinationals to prepare proposals Official visits to refineries (Petroleum) and Oil and Gas Fields.

2. Oil and Gas Development Company Limited, Pakistan6 months Training as instrument engineer in OGDCL (Oil and Gas Development Company Limited) at three different Oil and Gas fieldsI have practiced and got experience of following:PLC’s: Allen-Bradley PLC-5 for Ruston Gas Turbine TB5000, Allen-Bradley SLC-500 for air compressor, Siemens somatic S-7-300,Vibration monitoring System: Bentley Nevada 7200 Series, Electronic and pneumatic Control system: Fisher and Yokogawa Company, Smart Series transmitters: Yokogawa Company, Relay logic for refrigeration package. Pneumatic, electronic instrumentation related to measurements and control of flow, pressure, level, temperature, which includes transmitters, transducers signal converters, valves, gauges, controllers.

EducationPost Graduate Diploma in Instrumentation and Control Systems, OGDCL Institute of Science and Technology, IslamabadMajor Subjects:

Instrumentation (Well Head, Process, Electronics & PLC) SCADA Systems, HMI Designing & Configuration of SCADA/PLC Primavera (Project Planner) HSEQ (Health, Safety, Environment and Quality) Electrical/Electronic Maintenance Management Industrial Data Communication Power Generation, Distribution & UPS Systems

Bachelor of Engineering (BE) in Electronics, COMSATS Institute of Information Technology, Abbottabad, PakistanMajor Subject:Electric Circuits, Electronics Devices, Fiber Optic Communication, Control system, Machines, Programmable Logic Controller, Principals of Communication, Microwave Engineering, Signal & System, Data Communication.

Computer Skills Computer Hardware and Software’s Installation. Microsoft Office (Microsoft Word, Power Point, Excel) Primavera Project Planner (P6) Operating Systems Programmable logic controller

Memberships

Member of Pakistan Engineering Council, Membership number: ELECTRO/14037.

Managing Safety Course CertificateIOSH (Institute of Occupational Safety and Health) from (WISH) World Institute of Safety and Health.

Area of InterestInstrumentation & Control systemsConstruction Projects Management Instrumentation & Electrical Site Works

Reference Will be furnished on Request