English Module3 Electrical Hazards
-
Upload
salvador-joven -
Category
Documents
-
view
235 -
download
3
Transcript of English Module3 Electrical Hazards
![Page 1: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/1.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 1
Module 3Electrical Hazards
![Page 2: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/2.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 2
Let’s start with a few case histories
“An employee was electrocuted while using a grinder with a frayed cord. The employee was
standing in water, wet-grinding stone countertops…”
![Page 3: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/3.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 3
“A maintenance employee was electrocuted while attempting to change a light fixture…”
(no Lockout/Tagout)
“An employee was electrocuted when he made contact with a piece of equipment being hoisted from an excavation. The arm of the backhoe hoisting the equipment contacted an overhead power line…”
![Page 4: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/4.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 4
Top Electrical Citations (FY 2005)Top Electrical Citations (FY 2005)
350
660
1157
1313
0 200 400 600 800 1000 1200 1400
1926.416
1926.403
1926.405
1926.404
Elec. Wiring Methods, Components and Equipment, General Use
Electrical, General Requirements
Electrical, Safety-Related Work Practices, General Requirements
Electrical, Wiring Design and Protection
Source: Citation statistics from Federal OSHA data for OSHA fiscal year 2005
![Page 5: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/5.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 5
Causes of Causes of Electrocution FatalitiesElectrocution Fatalities
• Contact with Overhead Power lines• Contact with Live Circuits• Not following Lock/Tagout procedures• Poorly Maintained Extension Cords• Defective Power Tools
![Page 6: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/6.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 6
Electrical InjuriesElectrical InjuriesThere are three direct and two indirect types of
electrical injuries:• Direct:
Electrocution or death due to electrical shockElectrical shockBurns
• Indirect:FallsFire
![Page 7: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/7.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 7
Shock SeverityShock Severity• Severity of the shock
depends on:– Path of current through the
body– Amount of current flowing
through the body (amps)– Duration of the shocking
current through the body, • LOW VOLTAGE DOES NOT
MEAN LOW HAZARD
![Page 8: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/8.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 8
Overhead Power Lines HazardOverhead Power Lines Hazard • Usually not insulated• Examples of equipment
that can contact power lines:– Crane – Ladder– Scaffold– Backhoe– Scissors lift– Raised dump truck bed– Aluminum paint roller
![Page 9: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/9.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 9
It’s Your Job to Know!It’s Your Job to Know! Know the hazards of electricity Know the equipment Use Safe Work Practices Inspect your PPE before each use Don’t work on energized circuits without permission
![Page 10: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/10.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 10
Safety-Related Safety-Related Work PracticesWork Practices
To protect workers from electrical shock:– Use barriers and guards to prevent passage
through areas of exposed energized equipment
– Pre-plan work, post hazard warningsand use protective measures
– Keep working spaces and walkways clear of cords
![Page 11: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/11.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 11
“An employee working on a roof made contact with the service entrance riser into the home and was electrocuted…”
![Page 12: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/12.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 12
• Special Training is required for work on electrical equipment. Such training is for Authorized Employees and it covers:– Safe Work Practices – Isolation of Electrical Sources – Test Equipment – Tools & PPE
• Only Authorized Employees may conduct electrical work
CautionCaution
![Page 13: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/13.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 13
Control DevicesControl Devices
Control circuit devices such as…–push buttons –selector switches –interlocks
… may not be used as the sole means for de-energizing circuits or equipment.
![Page 14: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/14.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 14
Control – Use GFCIControl – Use GFCI(ground-fault circuit interrupter)(ground-fault circuit interrupter)• Protects you from shock• Detects difference in current
between the black and white wires • If ground fault detected, GFCI
shuts off electricity in 1/40th of a second
• Use GFCI’s on all 120-volt, single-phase, 15- and 20-ampere receptacles, or have an assured equipment grounding conductor program.
![Page 15: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/15.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 15
ELECTRICAL SAFETYELECTRICAL SAFETY Effects of Amount of AC Current
ma=1/1000th of an amp• 3 ma- painful shock which cause indirect
accidents• 10ma- muscle contraction...”no let go” danger• 30ma- lung paralysis- usually temporary• 50ma- possible ventricular fibrillation (heart
dysfunction, usually fatal)• 100 ma- certain ventricular fibrillation, fatal• 4 amps- heart paralysis, severe burns
![Page 16: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/16.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 16
How it worksHow it works
![Page 17: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/17.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 17
Are these safe practices?Are these safe practices?
![Page 18: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/18.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 18
Lock & TagLock & Tag• Lock & Tag all Sources
– Place Lock & Tag on each disconnecting means used to de-energize circuits
– Attach lock to prevent operating the disconnecting means
– Place Tag with each lock
Note: Only the person who places the lock may remove it.
![Page 19: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/19.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 19
Lockout Devices
![Page 20: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/20.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 20
If a Lock cannot be applied…If a Lock cannot be applied…• A tag used without a lock must be supplemented
by at least one additional safety measure that provides a level of safety equal to that of a lock.
• Examples:– Removal of an isolating circuit element
such as a fuse– Blocking of a controlling switch – Opening of an extra disconnecting
device.
![Page 21: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/21.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 21
TagoutThere many different kinds of tags and Lockout devices.
![Page 22: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/22.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 22
Release Stored EnergyRelease Stored Energy• Stored electric energy must be released
before starting work.
– Discharge all Capacitors
– Short-Circuit & Ground all high capacitance elements
![Page 23: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/23.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 23
Is it “Dead”?Is it “Dead”?• Verify System is De-
energized – Operate the equipment controls to check that equipment cannot berestarted.
Use test equipment to test the circuits & Use test equipment to test the circuits & electrical parts for voltage & currentelectrical parts for voltage & current
![Page 24: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/24.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 24
Alerting others of hazardsAlerting others of hazardsUse barricades to prevent or limit access to
work areas with un-insulated energized conductors or circuit parts.
Use safety signs, safety symbols, or accident prevention tags to warn others about electrical hazards which may endanger them.
If signs and barricades do not provide sufficient warning and protection from electrical hazards, an attendant shall be stationed to warn and protect employees.
![Page 25: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/25.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 25
Electrical ToolsElectrical Toolsand Cordsand Cords
![Page 26: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/26.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 26
Portable Electric Tools Portable Electric Tools & Cords& Cords
• Portable equipment must be handled in a manner which will not cause damage.
• Flexible electric cords connected to equipment may not be used for raising or lowering the equipment.
• Flexible cords may not be fastened with staples or otherwise hung in such a fashion as could damage the outer jacket or insulation.
![Page 27: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/27.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 27
Tools & EquipmentTools & Equipment– Use insulated tools or handling equipment
when working near exposed energized conductors or circuit parts.
– Use fuse handling equipment to remove or install fuses when the fuse terminals are energized.
– Ropes and handlines used near exposed energized parts must be nonconductive.
![Page 28: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/28.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 28
Power Tool RequirementsPower Tool Requirements• Have a three-wire cord with
ground plugged into a grounded receptacle, or
• Be double insulated, or
• Be powered by a low-voltage isolation transformer
![Page 29: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/29.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 29
Preventing Electrical Hazards - Preventing Electrical Hazards - ToolsTools
• Inspect tools before use
• Use the right tool correctly
• Protect your tools• Use double insulated
toolsDouble Insulated marking
![Page 30: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/30.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 30
Any problems?Any problems?
![Page 31: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/31.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 31
Clues that Electrical Hazards ExistClues that Electrical Hazards Exist • Tripped circuit breakers or
blown fuses• Warm tools, wires, cords,
connections, or junction boxes
• GFCI that shuts off a circuit• Worn or frayed insulation
around wire or connection
![Page 32: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/32.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 32
Beware of Old WiringBeware of Old Wiring• Removal of expansion tank (hot water).Removal of expansion tank (hot water).• Old style knob electrical wiring.Old style knob electrical wiring.• Victim contacted frayed wiring.Victim contacted frayed wiring.
![Page 33: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/33.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 33
Wire PullingWire Pulling
• Avoid manual wire pulling and use a tugger or a handtool whenever possible• Communication between the puller and feeder to coordinate movements will make the job easier and safer.• Use lighter-weight tools.
![Page 34: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/34.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 34
Reducing Body StrainsReducing Body Strains• CHANGE BODY POSITIONS. • Working overhead, at floor level, or in
cramped spaces forces the body into awkward postures.
• To relieve muscle tension and improve circulation, change body positions, alternate tasks, and stretch throughout the day.
![Page 35: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/35.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 35
SummarySummary
Electrical equipment must be:– Listed and labeled– Free from hazards– Used in the proper manner
If you use electrical tools you must:– Be protected from electrical shock– Use them in a comfortable position– Be provided with necessary safety equipment
![Page 36: English Module3 Electrical Hazards](https://reader035.fdocuments.us/reader035/viewer/2022062223/577cc9f11a28aba711a5033c/html5/thumbnails/36.jpg)
Harwood Crant #46J6-HT13 Rev. 011507 Southwest Safety Training Alliance Inc 36
Always remember…Always remember…It’s your It’s your lifelife!!
“A tree trimmer was electrocuted when he touched an overhead electrical line while descending a palm tree…”
“An employee was electrocuted while working on an A/C unit…”