“Engineering Asset Lifecycle Management” Proceedings …978-0-85729-320-6/1 · “Engineering...

“Engineering Asset Lifecycle Management”

Proceedings of the 4thWorld Congress on Engineering Asset Management (WCEAM 2009)28-30 September 2009

Editors Dimitris Kiritsis, Christos Emmanouilidis, Andy Koronios, and Joseph Mathew

Published by Springer-Verlag London Ltd

ISBN 978-1-84996-002-1

Proceedings of the 4th World Congress on Engineering Asset Management (WCEAM 2009)

Ledra Marriott Hotel, Athens

28-30 September 2009

All Rights Reserved

Copyright © Springer-Verlag 2010

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of the publisher.

PREFACE

The 4th World Congress on Engineering Asset Management, WCEAM 2009, held at the Ledra Marriott Hotel in Athens, Greece from 28 to 30 September 2009, represents a milestone in the history of WCEAM. It is the first to be organised under the auspices of the newly formed International Society of Engineering Asset Management (ISEAM) who will host WCEAM on an annual basis as its forum for exchange of information on recent advances in this rapidly growing field. WCEAM 2009 was organised with the invaluable support of the newly formed Hellenic Maintenance Society (HMS) in Greece, who acted as the local host.

After the inaugural WCEAM in July 2006 in the Gold Coast, Australia, visioned and initiated by the CRC for Integrated Engineering Asset Management (CIEAM) and organised in conjunction with the International Conference on Maintenance Societies (ICOMS) hosted by the Maintenance Engineering Society of Australia (MESA) and the International Maintenance Systems (IMS) Conference hosted by the Intelligent Maintenance Centre (IMS Centre), USA, the 2nd WCEAM was co-organised with the Condition Monitoring Conference hosted by the British Institute for Non-Destructive Testing (BINDT) in April 2007 in Harrogate, UK . The third congress in the series was organised in Beijing in October 2008 by a consortium comprising the Division of Mechanical and Vehicle Engineering, the Chinese Academy of Engineering, the China Association of Plant Engineering, the National Science Foundation Industry/University Cooperative Research Center on the Intelligent Maintenance Systems Center (IMS), USA, the Diagnosis and Self Recovery Engineering Research Centre at Beijing Chemical Technology University and CIEAM.

The theme of WCEAM 2009 was “Engineering Asset Lifecycle Management – A 2020 Vision for a Sustainable Future” and fits well with the lessons learnt from the recent financial and economical crises that impacted severely on the global economy and showed that a sustainable future requires consideration of the various lifecycle aspects of business, industrial and public good activities in their technical, organisational, economic, environmental and societal dimensions. The management of engineering assets over its lifecycle, which includes maintenance at its core, is a crucial element for global business sustainability and its importance is gradually being recognised by corporate senior management. Our seven distinguished keynotes at WCEAM 2009 presented developments in a number of these areas.

ISEAM envisions WCEAM as a global annual forum that promotes the interdisciplinary aspects of Engineering Asset Management (EAM). In view of this vision, WCEAM seeks to promote collaboration between organisations who share similar objectives and where particular matters of common interests are discussed. The program for this year included a number of special sessions organised by the EFNMS, EURENSEAM and the Manufacturing Technology Platform (MTP) on Maintenance for Sustainable Manufacturing (M4SM) of the Intelligent Manufacturing Systems international program (IMS). In addition, a session on modern maintenance training along with a dedicated e-training workshop on Maintenance Management was organised by the EU project, “iLearn2Main”.

WCEAM 2009 brought together over 170 leading academics, industry practitioners and research scientists from 29 countries to:

Advance the body of knowledge in Engineering Asset Management (EAM),• Strengthen the link between industry, academia and research,• Promote the development and application of research, and• Showcase state-of-the-art technologies.•

Over 120 scientific and technical presentations reported outputs of research and development activities as well as the application of knowledge in the practical aspects of:

Advanced Maintenance Strategies (RCM, CBM, RBI)• Condition monitoring, diagnostics, and prognostics•

Decision support and optimization methods and tools• Education and training in asset and maintenance management• E-Maintenance• Emerging technologies & embedded sensors and devices for EAM• Human dimensions in integrated asset management• Intelligent maintenance systems• Lifecycle & sustainability considerations of physical assets• Performance Monitoring and Management• Planning and scheduling in asset and maintenance management• Policy, Regulations, Practices and Standards for asset management• Quality of information and knowledge management for EAM• Risk management in EAM• Safety, Health and Risk Management in EAM• Self-maintenance and self-recovery engineering• Strategic asset management for sustainable business• Technologies for asset data management, warehousing and mining• Wireless technologies in EAM•

All full papers published in these proceedings have been refereed by specialist members of a peer review panel for technical merit.

We would like to gratefully acknowledge the support of Bayer Technology GmbH as Gold Sponsor, the Intelligent Manufacturing Systems – IMS international organisation as Satchel and Dinner Sponsor, the CRC for Integrated Engineering Asset Management (CIEAM) as Bronze Sponsor of WCEAM 2009 and the ATHENA Research and Innovation Centre as the Welcome Reception Sponsor. Function sponsorship was undertaken by Gefyra SA and Atlantic Bulk Carriers Management Ltd while the SBC business channel, the Supply Chain & Logistics & Plant Management magazines and the supply-chain.gr portal were WCEAM 2009’s publicity sponsors.

We would like to thank the Hellenic Maintenance Society (HMS) and the WCEAM Organising Committee for the enormous effort they have contributed to making this conference a success. Thanks are also due to members of the WCEAM International Scientific Committee for their efforts in both reviewing papers as well as promoting the congress within their networks.

Athens, the “mythical” city of Athena, the ancient Greek goddess of Sophia, and the Parthenon offered WCEAM 2009 participants with an ideal environment for knowledge exchange and networking opportunities which will lead to the beginning of much new fruitful collaboration.

Thank you for having been a part of WCEAM 2009. We look forward to meeting you at our next event, the 5th WCEAM in Brisbane, Australia, from 25-27 October 2010.

Dr. Dimitris Kiritsis Dr. Christos Emmanouilidis Professor Joseph MathewCongress Chair Co-chair Co-chair

Congress Chairs

Chair: Dr Dimitris Kiritsis, Ecole Polytechnique Fédérale de Lausanne, Switzerland.

Co-Chairs: Dr Christos Emmanouilidis, C.E.T.I/R.C. Athena, GreeceProfessor Joseph Mathew, CRC for Integrated Engineering Asset Management (CIEAM), Australia.

International Scientific Committee

Adolfo Crespo Marquez, SpainAjith Parlikad, UKAndrew Starr, UKAndy Koronios, AustraliaAndy Tan, AustraliaAnthony David Hope, UKAntonio J Marques Cardoso, PortugalAshraf Labib, UKBasim Al-Najjar, SwedenBenoit Iung, FranceBirlasekaran Sivaswamy, AustraliaBo-Suk Yang, KoreaBrett Kirk, AustraliaBrigitte Chebel Morello, FranceBruce Thomas, AustraliaChristos Emmanouilidis, GreeceDimitris Kiritsis, SwitzerlandErkki Jantunen, FinlandGao Jinji, P R ChinaGeorge Tagaras, GreeceHong-Bae Jun, KoreaIoannis Antoniadis, GreeceIoannis Minis, GreeceJay Lee, USAJayantha Liyanage, Norway

Jing Gao, AustraliaJoe Amadi-Echendu, South AfricaJong-Ho Shin, SwitzerlandJoseph Mathew, AustraliaKari Komonen, FinlandKerry Brown, AustraliaKondo Adjallah, FranceLen Gelman, UKLin Ma, AustraliaMarco Garetti, ItalyMargot Weijnen, The NetherlandsMing Zuo, CanadaMohd Salman Leong, MalaysiaMohsen Jafari, USA Nalinakash S Vyas, IndiaNoureddine Zerhouni, FrancePeter Tse, Hong Kong, ChinaRhys Jones, AustraliaRoger Willett, New ZealandSeppo Virtanen, FinlandShozo Takata, JapanStanislaw Radkowski, PolandTadao Kawai, JapanYiannis Bakouros, Greece

WCEAM 2009 Organising Committee

Ian Curry, Hi Events, AustraliaJane Davis, CIEAM, AustraliaKaterina Zerdeva, Zita Congress, GreeceProfessor Andy Koronios, CIEAM, University of South Australia, AustraliaRhonda Hendicott, Hi Events, AustraliaZacharias Kaplanidis, Zita Congress, Greece

Keynote Speakers

Dr Claudio Boer - Intelligent Manufacturing Systems“IMS Global Network Support for Maintenance for Manufacturing”

Claudio is Chairman of the International Steering Committee for Intelligent Manufacturing Systems (IMS). Over the past year, he has been involved with working to initiate an innovative program for researchers designed for easier global collaborations for new and on-going research called the Manufacturing Technology Platform (MTP) program.

Heinz Cznotka - Bayer Technology Services GmbH“Proactive Asset Lifecycle Management”

Dr Heinz Cznotka is the Director Competence Center Asset Management Consultancy and Sr. Risk and Reliability Consultant. He has 20 years experience in the oil, gas & petrochemical industry as: Project Manager, Reliability Manager, Production Manager, Managing Director Maintenance Services and Technical Risk Manager. Dr Cznotka’s core competences are Risk-based Maintenance (RBM), Reliability-centered Maintenance (RCM), Turnaround optimization; Lifecycle Length and Cost Optimization; Reliability & Maintenance Engineering and Optimization; Reliability & Maintenance related EHS Management; Reliability & Maintenance Production and In-Service Inspection.

Richard Edwards - EFNMS/IAM“Why do we need asset management trends and issues?”

Richard is a member of the Council of the Institute of Asset Management and the current chairman of the Asset Management Technical and Professional Network, a joint venture between the IET and the IAM. He is also a Board member of the IAM. A Director of AMCL for ten years, Richard has extensive experience in the application and assessment of Asset Management. ‘

Eric Luyer - IBM Corporation“Leveraging Smart Asset Management in Engineering and Product Lifecycle Management”

Eric Luyer has global responsibility for managing Industry Marketing activities for the Industrial Manufacturing sector.

With more than 25 years of experience, Eric has developed in-depth expertise in the industry, working in Financial, ERP and Enterprise Asset Management software application environments, initially in Europe and the last seven years worldwide. Eric Luyer has held senior positions in Sales Management, Indirect Channels, Alliance Partner Management and Industry Marketing - working for software solutions providers, such as Comshare, Global SSA, Baan/Invensys, MRO Software.

Currently Eric is taking the position of IBM’s worldwide Manager Product Marketing for Maximo Asset Management – positioning Asset Management in Industrial Manufacturing industries.

Dr. Panayotis Papanikolas – GEFYRA S.A.“Construction, operation and lifecycle cost of ships - Realizing that before maintenance comes maintenability “

Panayotis is Vice-Chairman & Managing Director of GEFYRA S.A., the concessionnaire company of the Rion - Antirion Bridge.

Holding the position of Technical Director during the construction of the longest multi-span cable stayed bridge in the world, built in aggressive environment in terms of durability, seismicity and wind, he was in charge of developing the inspection, monitoring and maintenance management plan of the bridge. Five years of operation have helped in fine-tuning what is considered today as one of the most complete structural asset management plans for bridges.

Jürgen Pothoff - Bayer Technology Services“Proactive Asset Lifecycle Management”

Jürgen has 16 years experience with globally operating Engineering, Procurement & Construction (EPC) Companies working on projects in Europe, Americas, Asia, MENA and Australia servicing the petrochemical, refineries, chemical process industry. He has worked as a Lead Process Engineer and Feasibility Study Leader for world scale petrochemical plants; Sales & Project Manager for lump sum turnkey EPC projects including a 4 year local assignment for the development of the Australian market; Establishment / Management of Maintenance Management & Contracting services based on risk based maintenance concept and 3 years as a Reliability Engineering Manager with major chemical company, on the development & global implementation of risk based maintenance.

Kristian Steenstrup - Gartner Inc.“Operational Technology and the relationship to IT Management”

Kristian is research vice president in Gartner’s Australian branch. He conducts and delivers research on Enterprise Business Systems including ERP, EAM, SCM, CRM and c-commerce. Kristian is responsible for vendor analysis in the Asia/Pacific market and is global research leader for Asset Intensive ERP II. Before joining Gartner Kristian worked in ERP and EAM system design and delivery for over 15 years in a number of global markets. During this period he was directly involved in emerging technologies in Asset Intensive industries such as Utilities, Mining, Rail and Defence.

Panos Zachariadis - Atlantic Bulk Carriers“Construction, operation and lifecycle cost of ships – Realising that before maintenance comes maintainability”

Panos is Technical Director of Atlantic Bulk Carriers Management Ltd. From 1984 to 1997 he was Marine Superintendent for a New York bulk carrier and oil tanker shipping company. His shipping experience spans diverse areas such as sea service in bulk carriers and oil tankers, supervision of dry dock repairs, new building specifications and supervision, ship operations andchartering. Mr. Zachariadis holds a BSc degree in Mechanical Engineering from Iowa State University and a MSE degree in Naval Architecture and Marine Engineeringfrom the University of Michigan. He is a founding member of Marine Technical Managers Association (MARTECMA) of Greece.

Bayer Technology Services GmbH51368 Leverkusen, GermanyE-mail: [email protected]

SPONSORSGold Sponsor

Satchel & Congress Dinner Sponsor Bronze Sponsor

Welcome Reception Sponsor Wednesday Lunch Sponsor Monday Morning Tea Sponsor

Publicity Sponsors

Exhibitors

Ledra Marriott Hotel, Athens, GreeceLedra Marriott Hotel, Athens, Greece

Program

The organisers reserve the right to make changes to the program.

Sunday 27 September 2009 1930 Dinner at Horizons Restaurant - Optional dinner

at additional cost Sponsored by Bayer Technology Services

Monday 28 September 2009 0700 Exhibitors and poster presenters mount displays

0830 Conference Registration

0900-0930 Welcome – Opening session Plenary session sponsored by Bayer Technology Services

Chair: Dimitris Kiritsis

0930-1015 Keynote address 1: Heinz Cznotka & Jürgen Potthoff, Bayer Technology Services GmbH Proactive Asset Lifecycle Management

1015-1100 Keynote address 2: Kristian Steenstrup, Research VP, Gartner Inc Operational technology and its relationship to IT Management

1100-1120 Coffee break

1120-1300 Sessions

Session1: EURENSEAM - 1 - Strategic Engineering Asset Management

Session 2: Transport, Building and Structural Asset Management

Session 3: Lifecycle & Sustainability Considerations Of Physical Assets

Chair: J P Liyanage Chair: Tony Hope Chair: Andy Koronios

Ahonen, T., Collaborative development of Maintenance investment management: A case study in pulp and paper industry

Kaphle, M., Tan, ACC., Kim, E. and Thambiratnam, D., Application of acoustic emission technology in monitoring structural integrity of bridges

Frolov, V, Mengel, D, Bandara, W, Sun, Y and Ma, L., Building an ontology and process architercture for engineering asset management

Al-Najjar, B. and Ciganovic, R., A model for more accurate maintenance decisions

Nayak, R., Piyatrapoomi, N. and Weligamage, J., Application of text mining in analysing road crashes for road asset management

Karray, MH, Morello, BC and Zerhouni, N, Towards A Maintenance Semantic Architecture

Gudergan, G., The House of Maintenance - Identifying the potential for improvement in internal maintenance organizations by means of a capability maturity model

Pérez, AA, Vieira, ACV, Marques Cardoso, AJ, School Buildings Assets - Maintenance Management and Organization for Vertical Transportation Equipment

Koronios, A., Steenstrup, C. and Haider, A., Information and Operational Technologies Nexus for Asset Lifecycle Management

Parida, A. and Kumar, U., Integrated strategic asset performance assessment

Phillips, P., Diston, D., Starr, A., Payne, J., and Pandya, S., A review on the optimisation of aircraft maintenance with application to landing gears

Matsokis, A., Kiritsis, D., An advanced method for time treatment in product lifecycle management models

Rosqvist, T., Assessing the subjective added value of value nets: which network strategies are really win-win ?

Piyatrapoomi, N. and Weligamage, J. Risk-based approach for managing road surface friction of road assets

Shin, J-H, Kiritsis, D., Xirouchakis, P., Function performance evaluation and its application for design modification based on product usage data

1300-1420 Lunch

World Congress of Engineering Asset Management 2009World Congress of Engineering Asset Management 2009

Program

1420-1540 Sessions

Session4: EURENSEAM - 2 - Strategic Engineering Asset Management

Session 5: Transport, Building and Structural Asset Management

Session 6: Technologies For Asset Data Management, Warehousing & Mining

Chair: Bassim Al-Najjar Chair: Joe Amadi-Echendu Chair: Michael Purser

Al-Najjar, B., A Computerized model for assessing the return on investment in maintenance

Amadi-Echendu, J.E., Belmonteb, H., von Holdtc, C., and Bhagwand, J. A case study of condition assessment of water and sanitation infrastructure

Haider, A., Open Source Software Development for Asset Lifecycle Management

González Díaz, V., Fernández, JFG, Crespo Márquez, A., Case study: Warranty costs estimation according to a defined lifetime distribution of deliverables

Nastasie, D., Koronios, A., The role of standard information models in road asset management

Kans, M., Assessing maintenance management IT on the basis of IT maturity

Schuh, G. And Podratz, K., Remote service concepts for intelligent tool-machine systems

Nastasie, D., Koronios, A., The diffusion of standard information models in road asset management: - A study based on the human - technology environment

Mathew, A., Purser, M., Ma, L. and Barlow, M., Open standards-based system integration for asset management decision support

Wijnia, YC and Herder, PM, The state of Asset Management in the Netherlands

Ninikas, G., Athanasopoulos, Th., Marentakis, H., Zeimpekisa, V., and Minis, I., Design and implementation of a real-time fleet management system for a courier operator

Peppard, J., Koronios, A. Gao, J., The data quality implications of the servitization - theory building


1600-1645 Keynote address 3: Richard Edwards, European Federation of National Maintenance Societies & Institute of Asset Management Why do we need asset management: trends and issues

Chair: Christos Emmanouilidis

1650- 1810 Sessions

Session7: EFNMS - Engineering Asset Management in Europe

Session 8: Decision Support & Optimisation Methods & Tools

17.00 - 19.00 ISEAM AGM

Chair: Kari Komonen Chair: Marco Macchi Chair: Joe Mathew

Benetrix, L., Garnero, MA and Verrier, V., Asset management for fossil-fired power plants: methodology and an example of application

Cenna, AA, Pang, K, Williams, KC, Jones, MG, Micromechanics of wear and its application to predict the service life of pneumatic conveying pipelines

Olsson, C., Labib, A. and Vamvalis, C. CMMS – Investment or Disaster ? Avoid the Pitfalls

Kim, JG, Jang, YS, Jeong, HE, Lim, J and Choi, BK, Flexible coupling numerical analysis method

Ulaga, S., Jakovcic, M. And Frkovic, D. Condition monitoring supported decision processes in maintenance

Godichaud M. , Pérès F. and Tchangani A., Disassembly process planning using Bayesian network

1930-2100 Welcome Cocktail Function - Sponsored by ATHENA Research & Innovation Centre

Monday 28 September 2009 ... continued


Program

Tuesday 29 September 2009 830 Delegate Arrival & Registration

0900-0945 Keynote address 3: Claudio Boer, Chairman, Intelligent Manufacturing System (IMS)IMS Global Network Support for Maintenance for Manufacturing

Chair: Marco Garetti

1000-1140 Sessions

Session 9: Maintenance for Sustainable Manufacturing - 1

Session 10 - Strategic asset management for sustainable business

S11 - Advanced Maintenance Strategies (RCM,CBM,RBI)

Chair: Marco Garetti Chair: Ajit Parlikad Chair: Lin Ma

Garetti, M. Welcome & Introduction to MTP M4SM Special Session

Furneaux, C.W., Brown, K.A., Tywoniak, S., and Gudmundsson, A., Performance of public private partnerships: an evolutionary perspective

Gorjian, N., Ma, L., Mittinty, M., Yarlagadda, P. and Sun, Y., A review on degradation models in reliability analysis

Pantelopoulos, S. (Industrial talk), Product maintenance in the ‘Internet of things’ world

Labib, A., Maintenance strategies: a systematic approach for selection of the right strategies

Gorjian, N., Ma, L., Mittinty, M., Yarlagadda, P. and Sun, Y., A Rreview on reliability models with covariates

Gómez Fernández J F*, Álvarez Padilla F J, Fumagalli L, González Díaz V, Macchi M, Crespo Márquez A, Condition monitoring for the improvement of data center management orientated to the Green ICT

Rezvani, A., Srinivasan, R., Farhan, F., Parlikad, AK., and Jafari, M., Towards Value Based Asset Maintenance

Muhammad, M., Majida, A.A. and Ibrahima, N.A., A Case study of reliability assessment for centrifugal pumps in a petrochemical plant

Liyanage J P, Badurdeen F, Strategies for integrating maintenance for sustainable manufacturing: developing integrated platforms

Yeoh, W., Koronios, A. And Gao, J., Ensuring Successful Business Intelligence Systems Implementation: Multiple Case Studies in Engineering Asset Management Organisations

Sun, Y., Ma, L., Purser, M. and Fidgeb, C., Optimisation of the reliability based preventive maintenance strategy

Tsutsui M, Takata S, Life Cycle Maintenance Planning System in consideration of operation and maintenance integration

Gao, J., Koronios, A., Kennett, S., Scott, H., Data quality enhanced asset management metadata model

Lee, WB, Moh, L-S, Choi, H-J, Lifecycle Engineering Asset Management


1200-1310 Sessions

Session 12: Maintenance for Sustainable Manufacturing - 2

Session 13 - Planning, Scheduling & Performance Monitoring

Session 14 - Decision Support & Optimisation Methods & Tools

Chair: Shozo Takata Chair: Seppo Virtanen Chair: Colin Hoschke

Cannata A, Karnouskos S, Taisch M, Dynamic e-Maintenance in the era of SOA-ready device dominated industrial environments

Haider, A., Driving innovation through performance evaluation Chebel-Morello, B., Haouchine, K., Zerhouni, N., Methodology to Conceive A Case Based System Of Industrial Diagnosis

Emmanouilidis, C. and Pistofidis, P. Design requirements for wireless sensor-based novelty detection in machinery condition monitoring

Kim, D., Lim, J-H., Zuo, MJ., Optimal schedules of two periodic preventive maintenance policies and their comparison

Lim, JI, Choi, BG, Kim, HJ, Kim, JG, and Park, CH., Optimim design of vertical pump for avoiding the reed frequency

Kans M, Ingwald A, Analysing IT functionality gaps for maintenance management

Lipia, TF, Zuo, MJ, and Lim, J-H., Optimal Replacement Decision Using Stochastic Filtering Process to Maximize Long Run Average Availability

Mokhtar, AA, Muhammad, M and Majida, MAA, Development of spreadsheet based decision support system for product distributions

Garetti, M - Session Wrap-Up Seraoui R., Chevalier R. and Provost D., EDF’S plants monitoring through empirical modelling: performance assessment and optimization

Smalko Z, Woropay M, Ja, Z, The diagnostic decision in uncertainly circumstances


Program

1310-1430 Lunch

1430-1610 Sessions

Session 15: Maintenance for Sustainable Manufacturing - 3 - Education & Training

Session 16: Advanced Maintenance Strategies

Session 17: Condition Monitoring, Diagnostics & Prognostics

Chair: Jan Franlund Chair: Stanislow Radkowski Chair: Tony Rosqvist

Bakouros, Y., Panagiotidou, S, and Vamvalis, C., Education and Training Needs in Maintenance: How you conduct a self-audit in Maintenance Management

Bey-Temsamani, A., Engels, M., Motten, A., Vandenplas, S. and Ompusunggu, AP., Condition-based maintenance for OEM’s by application of data mining and prediction techniques

Chen T., Xu XL, Wang, SH, Deng SP. , The Construction and Application of Remote Monitoring and Diagnosis Platform for Large Flue Gas Turbine Unit

Emmanouilidis, C., Labib, A, Franlund, J., Dontsiou, M, Elina, L., Borcos, M., iLearn2Main: an e-learning system for maintenance management training

Gontarz, S. and Radkowski, S., Shape of specimen impact on interaction between earth and eigenmagnetic fields during the tension test

Gu, DS, Kim, BS, Lim, JI, Bae, YC, Lee, WR, Kim, HS, Comparison of vibration analysis with different modeling method of a rotating shaft system

Franlund, J, Training and Certification of Maintenance and Asset Management Professionals

Kiassat, C and Safaei, N., Integrating human reliability analysis into a comprehensive maintenance optimization strategy

Kim, BS, Gu, DS, Kim, JG, Kim, YC and Cho, BK, Rolling element bearing fault detection using acoustic emission signal analyzed by envelope analysis with discrete wavelet transform

Macchi, M., Ierace, S., Education in Industrial Maintenance Management: Feedback From Italian Experience

Mazhar, MI, Salman, M and Howard, I, Assessing the reliability of system modules used in multiple life cycles

Kim, H-E, Tan, ACC, Mathew, J, Kim, EYH, Cho, BK, Prognosis of Bearing Failure Based on Health State Estimation

Starr, A. Bevis, K., The role of education in industrial maintenance: the pathway to a sustainable future

Radkowski S, Gumiński R, Impact of vibroacoustic diagnostics on certainty of reliability assessment

Xu XL, Chen T, Wang SH, Research on Data-Based Nonlinear Fault Prediction Methods in Multi-Transform Domains for Electromechanical Equipment


1630-1750 Sessions

Maintenance for Sustainable Manufacturing - 4 - M4SM Project kick-off 1° M4SM Meeting

Session 18: Emerging Technologies in EAM Session 19: Condition Monitoring, Diagnostics & Prognostics

Chair: Marco Garetti Chair: Bo-Suk Yang Chair: Andrew Starr

Espíndola, D., Pereira, CE, Pinho, M., IM:MR - A tool for integration of data from different formats

Jasiński M., Radkowski S., Use of bispectral-based fault detection method in the vibroacoustic diagnosis of the gearbox

Mikail F. Lumentut , Ian M. Howard, Theoretical study of piezoelectric bimorph beams with two input base-motion for power harvesting

Maszak, J., Local meshing plane as a source of diagnostic information for monitoring the evolution of gear faults

Shim, M-C, Yang, B-S, Kong, Y-M, Kim, WC, Wireless condition monitoring system for large vessels

Yang, SW, Widodo, A, Caesarendra, W, Oh, JS, Shim, MC, Kim, SJ, Yang, BS and Lee, WH, Support vector machine and discrete wavelet transform for strip rupture detection based on transient current signal

Smit, JJ, Djairam, D., Zuang, Q., Emerging Technologies and Embedded Intelligence in Future Power Systems

Ierace, S., Garetti, M. and Cristaldi, L., Electric Signature Analysis as a cheap diagnostic and prognostic tool

1915 Departure for Gala Dinner

1945 Conference Dinner - Athens Yacht Club Sponsored by IMS Keynote address 4 - Panos Zachariadis, Atlantic Bulk CarriersConstruction, operation and lifecycle cost of ships - Realizing that before maintenance comes maintenability

Chair: N. Nassiopoulos

Tuesday 29 September 2009 ... continued


Program

Wednesday 30 September 20090845 Delegate Arrival

0900-1300 WORKSHOP: INTEGRATION AND INTEROPERABILITY IN ENGINEERING ASSET MANAGEMENT (EAM)

0900-1020 Sessions

Session 20: e-Maintenanance Session 21: Policy, Regulations, Practices & Standards For Asset Management


Chair: Errki Jantunen Chair: Ashraf Labib Chair: Andy Tan

Baglee, D., The Development of a Mobile e-maintenance system utilizing RFID and PDA Technologies

Haider, A., A Roadmap for information technology governance Kim, EY., Tan, ACC., Mathew, J. and Yang, B-S., Development of an Online Condition Monitoring System for Slow Speed Machinery

Jantunen, E. Gilabert, E., Emmanoulidis, C. and Adgar, A., e-Maintenance: a means to high overall efficiency

Mathew, A., Purser, M. Ma, L. and Mengel, D., Creating an asset registry for railway electrical traction equipment with open standards

Rgeai, M., Gu, F., Ball, A., Elhaj, M., Ghretli, M. Gearbox Fault Detection Using Spectrum Analysis of the Drive Motor Current Signal

Oyadiji, SO, Qi, S. and Shuttleworth, R., Development of Multiple Cantilevered Piezo Fibre Composite Beams Vibration Energy Harvester for Wireless Sensors

Stapelberg, RF, Corporate Executive Development for Integrated Assets Management in a New Global Economy

Zhu, Z., Oyadiji, SO, and Mekid, S., Design and Implementation of a Dynamic Power Management System for Wireless Sensor Nodes


1040-1200 Sessions

Session 23: Technologies For Asset Data Management, Warehousing & Mining

Session 24: Advanced Maintenance Strategies (RCM,CBM,RBI)


Chair: Matt Barlow Chair: Ioannis Bakouros Chair: Ioannis Antoniadis

Grossmann, G, Stumptner, M, Mayer, W, and Barlow, M, A Service oriented architecture for data integration in asset management

Bohoris, G.A. and Kostagiolas, P.A., Inferences on non-parametric methods for the estimation of the reliability function with multiply censored data

Mpinos, CA and Karakatsanis, T., Development of a dynamic maintenance system for electric motor’s failure prognosis

Natarajan, K., Li, J. and Koronios, A., Data mining techniques for data cleaning

Gilabert, E., Gorritxategi, E., Conde, E., Garcia, A., Areitioaurtena, O. and Amaya Igartuaa, An advanced maintenance system for poligeneration applications

Gryllias, K.C., Yiakopoulos, C. and Antoniadis, I., Automated diagnostic approaches for deffective rolling element bearing using minimal training pattern classificaiton methods

Natarajan, K., Li, J. and Koronios, A., Detecting mis-entered values in large data sets

Kostagiolas, P.A., and Bohoris, G.A., Finite sample behaviour of the Hollander-Proschan goodness of fit with reliability and maintenance data

Pang, K., Cenna, AA, Williams, KC, and Jones, MD, Experimental determination of cutting and deformation energy factors for wear prediction of pneumatic conveying pipeline

Apostolids, H. (industrial talk), Crisis in Maintenance and Maintenance in Crisis: Opportunities for Maintenance Re-engineering

Yachiku, H., Inoue, R., and Kawai, T., Diagnostic Support Technology by Fusion of Model and Semantic Network

1200-1320 Lunch - sponsored by GEFYRA SA


Program

1320-1520 Sessions

Session 26: Workshop for e-training in Maintenance Management (HMS, M4SM, iLearn2Main)

Session 27: Safety, health and risk management in EAM


Chair: Christos Emmanouilidis Chair: Pantelis Botsaris Chair: Tadao Kawai

Papathanassiou, N., Emmanouilidis, C., e-Learning in Maintenance Management Training and Competence Assessment: Development and Demonstration

Botsaris, P.N., Naris, A.D., and Gaidajis, G., A Risk Based Inspection (RBI) preventive maintanance programme: a case study

Fumagalli, L., Jantunen, E., Garetti, M. and Macchi, M., Diagnosis for improved maintenance services: Analysis of standards related to Condition Based Maintenance

Maintenance Management: Live & Interactive e-training and e-assessment workshop

Papazoglou, IA, Anezirisa, ON, Konstandinidou, M, Bellamy, LJ, Damen, M, Assesing occupational risk for contact with moving parts of machines during maintenance

Widodo, A., and Bo-Suk Yang, Machine prognostics based on survival analysis and support vector machine

Skroubelos, G., Accident causes during repair and maintenance activities and managerial measures effectiveness

Younus, AM, Widodo, A and Yang, B-S., Image Histogram Features Based Thermal Image Retrieval to Pattern Recognition of Machine Condition

Training in Maintenance Management Panel Discussion & Evaluation (Jan Franlund, Ashraf Labib, Andrew Starr, Yiannis Bakouros, Cosmas Vamvalis)

Elforjani, M. Mba, D. Acoustic emissions observed from a naturally degrading slow speed bearing and shaft

A Addali, S Al-lababidi, H Yeung, D Mba, Measurement of gas content in two-phase flow with acoustic emission


1540-1625 Congress Closing Keynote Address 6: Panayiotis Papanikolas, GEFYRA SA Maintenance Management of the Rion-Antirion Bridge

1625-1710 Congress Closing Keynote Address 7: Eric Luyer, IBM Corporation Leveraging Smart Asset Management in Engineering and Product Lifecycle Management

Chair: Joe Mathew

1710-1730 Closing Remarks - End of WCEAM 2009

1830 Visit to new Acropolis Museum and dinner at Dionysos Restaurant - optional at additional cost

Wednesday 30 September 2009 ... continued

“Engineering Asset Lifecycle Management” Proceedings …978-0-85729-320-6/1 · “Engineering...

Documents

Transcript of “Engineering Asset Lifecycle Management” Proceedings …978-0-85729-320-6/1 · “Engineering...