Engineer Training UV Lamp Head TJ8300 / TJ8500 UV Lamp Head.
-
Upload
irene-cromwell -
Category
Documents
-
view
224 -
download
1
Transcript of Engineer Training UV Lamp Head TJ8300 / TJ8500 UV Lamp Head.
Engineer Training
UV Lamp Head
TJ8300 / TJ8500
UV Lamp Head
Confidential 2
Engineer Training
UV Lamp Head
TJ8300 / TJ8500General
Confidential 3
Engineer Training
UV Lamp Head
TJ8300 / TJ8500General (Cont.)
WaterCooled Extrusion
Shutter
UV Lamp
IR AbsorbingDichroic Reflector
Housing
Confidential 4
Engineer Training
UV Lamp Head
TJ8300 / TJ8500General (Cont.)
Confidential 5
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Components
The UV lamp head includes:
Ultra violet (UV) lamp
Shutters
Reflectors
Quartz plate filter
Air extraction windows
Water tubes and ducts
Confidential 6
Engineer Training
UV Lamp Head
TJ8300 / TJ8500UV Lamp
UV Lamp
Confidential 7
Engineer Training
UV Lamp Head
TJ8300 / TJ8500UV Lamp (Cont.)
The lamp is the heart of the UV system.
Lamp power is up to 200 W/cm (36kW).
The lamp, by nature, cannot be switched On or Off instantly.
When the machine is in Idle mode:
The lamp switches to the reduced power level of 30%.
The shutters are closed.
Lamp’s operating temperature is 650°C - 850°C.
Confidential 8
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Shutters
Shutters are closed when the machine is not printing.
Shutters are automatically activated when the machine startsto print.
Shutters are operated pneumatically.
Confidential 9
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Shutters (Cont.)
Shutters open Shutters closed
Confidential 10
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Reflectors
Upper Shutter
The Reflectors
Confidential 11
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Reflectors (Cont.)
The reflectors are manufactured from pure aluminum, anodized for protection and treated to give maximum UV reflectivity.
The reflectors absorb heat and reflect UV.
The reflectors minimize the IR power and maximize the UV power.
Confidential 12
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Reflectors (Cont.)
Min IRMax UV
Absorb heatandreflect UV
Upper Shutter
Confidential 13
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Reflectors (Cont.)
IR Power
UV Power
Confidential 14
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Quartz Plate Filter
The purpose of the quartz plate filter is to:
Prevent the media from touching the reflectors and the UV lamp.
Prevent ink fumes from entering the lamp head.
Quartz Plate Filter
Confidential 15
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Air Extraction Windows
The purpose of the air extraction windows is to:
Allow the lamp head to cool down by extracting the heat fromits vicinity.
Remove the small quantities of ozone that are generated around the lamp.
Air Extraction Windows
Air Extraction Windows
Confidential 16
Engineer Training
UV Lamp Head
TJ8300 / TJ8500Water Tubes and Ducts
The purpose of the water is to cool down the UV lamp head.
The ducts are located around the UV lamp head.