7/31/2019 Engineer Resp

1/2

As a Safety (HSE) Engineer, I was involved in preparing HSE plan for miscellaneous

projects. I use to conduct inspections for.

a) Electrical Installationsb) Personal Protective Equipmentc) Hand Toolsd) Notices and Signse) Fire Fighting Equipmentf) Compressed Gas Cylinderg) Pneumatic Toolsh) Portable Electrical Toolsi) Trench/Excavationsj) Stairs, Ladders and Scaffoldk) Work Permitsl) Building and Floorsm)Lightingn) Ventilationo) Washrooms and Toiletsp) Stacking and Storageq) Scrap and Refuse Removalr) Machine Guardings) House-keepingt) Confined space

Implementation of company safety policy procedures and co-ordination with alldepartments such as Mechanical, Electrical and Civil to achieve the high standard

safety.

Plan, design, operate and maintain all facilities, processes and procedures to securesustained Safety, Health and Environmental, protection.

I use to consult with safety manager for organizing effective health and safetyprogram.

Also I was involved in safety meetings.

7/31/2019 Engineer Resp

2/2

Investigation of accident / incident / fire / near miss to identify the hazards whichcreate the problems same of the unsafe act / condition and its preventive measures.

Use to provide periodic tool-box talk. Regular safety inspection ensuring site safety administration including safety

induction, hazard identification plan, emergency procedures

Providing of site requirement for drinking water, toilets, dining hall, sick room withfirst aid amenities etc.

Heavy equipment safety inspection, verification and validating of safety certificatesthrough third party for cranes, trailer, forklift as per company rules and regulations

Safety audit of lifting accessories such as slings, D-shackles, pins, man-basket, wireropes, lifting belts.

Controlling the work place hazard by preparing hazard check list pertaining details ofexisting hazards. Identification of hazards and preventing accidents by ranking thehazards to its risk level.

Check list of work permit system, safety precaution during the vessel entry, hotwork, and cold work and energy isolation LOTO activities.

Gas testing L.E.L / U.E.L. Oxygen % testing for carryout job in Hazardous / Toxicarea as well as tank confined space entry etc. proper arrangement of safety and fire

equipments, fire watch during the hot work / vessel entry.

Proper display the safety and fire sign in hazardous / toxic area. No smoking at plantas well as office building accommodations etc.

Monitoring the good housekeeping & hygiene at site area to keep the naturalenvironment.

Ensured availability of fire fighting Extinguishers where ever necessary and alsotrained workers for the correct use of the same.

Conducted Fire Mock Drill and trained the workers for the Emergency EvacuationProcedure after hearing the emergency siren and conduct head counting of the

workers assembled at the Assembly point area.

Co-ordinate with project management to achieve the project goals.