QUICKSTARTGUIDEANDROID

eNetSMARTHOMEapp

2

CONTENTS

Summary Page3

Let‘s go Page4

My home Page5

Rooms Page6

Automation Page9

- Create scenes Page11

- Create time-controls Page12

- Create if-then rules Page13

System

- Set up remote access Page14

- Set up partner systems Page15

eNet SMART HOME

3

Control, automation, settings, save energy and assigning access rights – all with the eNet SMART HOME app.

SUMMARY

Withinyourhouse,youassignuserrights,createpasswordsandsetuptheremoteaccessandpartnersystems.

“MyHome“isyourcustomi-sablepage.Modifyitsoyoucanaccessyourfavouritescenesanddevicesatthetouchofabutton.

The“Rooms“viewallowsyoutokeepaneyeoneverything.Youcancontroltheentirebuilding,floorsandindividualroomsviacentralfunctions.Youcancontrolindividualdevicesinthedetailedview.

Automateyourhomesothatitmatchesyourlifestyle.Createindividualscenes,rulesandtimecontrols.(Thisfunctionisonlyvisibleifyouareauthorisedtochangesettings.)

Operating system requirements for the

eNet SMART HOME app: minimum Android 5.0

4

LET’SGO

Connect to the server

EnsurethattheeNetserverandyouriPhoneareonthesamenetwork.

Enter the user data provided by your service partner or use the pre-defi ned username “user” and password “user”

Log on to the eNet server

5

MYHOME

Your system informs you about important messages

Select which favourite scenes should be displayedand which should be hidden

We have pre-defi ned scenes for you, which youcan customise or re-create at a later date

Later, your favourite devices will be displayed here

You are here

6

ROOMS

Change the order of the areaslighting, blinds, air conditioning and other

Quick operation of individual devices

Central control of the lighting in the entireroom (in this case: switch all the lighting in the entire living room off at the touch of a button)

Check the room information to see at a glance:• whether a light is on anywhere• whether a blind is closed• which heating mode is active (In this case, there is at least one lightswitched on, a blind is completely or partiallyclosed and the heating is on automatic

Here you can fi nd help for the icons and you can set whether the room information should be displayed

Central control for the entire building or the entire fl oor

Click here to access the room details

You are here

Display important information for this room

Tap on a device name to enter the detail pageof that device

7

* For an explanation, refer to the user manual of the devices or ask your service partner.

ROOMS

Mark your favourite devices as a “favourite”so that they appear in the “My Home” view

Decide whether the device is switched with the central control and change key device parameters* (only available if you are authorised to change settings)

Once marked as a “favourite”, the blind in theliving room appears in the “My Home” view

Open and close the blind

Determine the position of the slats (notavailable for shutters and awnings)

Control the light intensity

Turn the light on and off

KitchenKitchenKitchen

AutomaticAutomaticAutomatic

AutomaticAutomaticAutomatic ManualManualManual Frost protectionFrost protectionFrost protection

23.0°23.0°23.0°

23.0°C23.0°C23.0°C 45%45%45%

8

ROOMS

Once marked as a “favourite”, the heating in the kitchen appears in the “My home” view

Adjust the heating to the desired temperature

Change the operating mode of your heatingand set in manual mode for how long this setting should apply

23.0°23.0°23.0°

9

AUTOMATION

Combine individual actions into scenes that you can run at the touch of a button

Time control allows you to run individual actionsand scenes at a specifi c time

Run actions using rules, if a certain event occurs. This assigns, e.g. scenes and individual actions to the keys of hand-held and wall-mounted transmitters

(THISFUNCTIONISONLYAVAILABLEIFYOUAREAUTHORISEDTOCHANGESETTINGS)

You are here

Add your own scenes, timers and if-then rules

Examples of actions:

• Switchonindividualdevices:e.g.dimdiningtablelampto50%

• Usecentralcontrol:e.g.turnallthelightsintheentirehouseonoroff

• Saveacompleteroomsituation:thisallowsyoutocallupthecurrentstateofyourdevicesintheroomatalatertime

• Triggerthescene:acertainscenecanbetriggeredviatimecontrolorarule

• Deactivatethetimecontrolsandrules:e.g.ifyouareonholiday,justdeactivatetheautomaticlightcontrol

10

Create new scenes, timers and if-then rules

AUTOMATION

You are here

11

AUTOMATIONCREATESCENE

TIP:If you want a sequence

of actions to be executed in a time control or if-then rule to be performed at the same time and not one after the

other, set up a scene.Then add this as an action

to a time control or if-then rule.

State the scene

Set whether this scene is displayed in the favourites list in the “My Home” view

Select an icon for your scene

Add an action

NOTE:Time settings for the heating in conjunction with tado° Professional can be created via the tado° app

ActionsActionsActions

EnabledEnabledEnabled

PropertiesPropertiesProperties

NamNamNameeePlease enterPlease enterPlease enter

RepeatRepeatRepeatDailyDailyDaily

TimeTimeTimeExecute action at 12.00 amExecute action at 12.00 amExecute action at 12.00 am

Add timerAdd timerAdd timer

Add an action using the + button and select Add an action using the + button and select Add an action using the + button and select from a multitude of options for automating from a multitude of options for automating from a multitude of options for automating your home. Switch on individual devices or your home. Switch on individual devices or your home. Switch on individual devices or activate a selected scene.activate a selected scene.activate a selected scene.

Select required actionsSelect required actionsSelect required actions

12

State your time control

Set whether this time control is activeor inactive

Optionally set “fi xed time” or “subject to sunlight” and repetitions

Add an action

AUTOMATIONTIMECONTROL

13

Delayed actions can be set

If-conditions are used as the trigger for then-and-later actions. Later-actions are not executed immediately, but after an adjustable delay

AUTOMATIONIF-THENRULE

Set whether one or numerous conditions have to be satisfi ed

Add conditions and actions

If-conditions can be:

• Abuttonofahand-heldorwall-mountedtransmitterispressed(duringcommissioning,yourservicepartnerconfiguredspecifickeysforuseintheapp)

• Whenusingthetado°system,thetwopresencedetectionstates“tado°Home”and“tado°Away”canbefoundunder“Myhome”(theyareconfigu-redinthetado°app)

• Movement(amotiondetectorregistersamovement)

• Thebrightnessorelectricalpowermeasuredbyasensoriseitherundershotorexceeded(e.g.youcansetarulethatassoonastheTVisswitchedonandthesuncausesglare,theblindsareclosedautomatically)

State your rule

Set whether this rule is active or inactive

14

SYSTEM

Register at www.my.enet-smarthome.com

Enter your user data at the end of registration.Following this, remote access is then activated immediately

To be able to control your smart home outside your network via iPhone, set up remote access. To activate it, you must be in the same network as the eNet server

Here you can manage users and change passwordsand permissions (if you are authorised to change settings)

Your user name, with which you are registered on the eNet server

SETUPREMOTEACCESS

2

1

15

SYSTEMSETUPPARTNERSYSTEMS

Enter here the e-mail address and thepassword with which you are registeredin the tado° app

To enable control of your tado° Professional devices via the eNet SMART HOME app, these must be set up via “partner systems”. This requires that the tado° system has already been put into operation

16

SYSTEM

Rooms you created in the tado° app, will nowbe imported into the eNet SMART HOME app.Please assign the tado° rooms here to roomsin the eNet SMART HOME app

The termination condition is “Until the next automa-tion” is selected as default. You can, of course,choose which of the three termination conditions you prefer. More detailed information about thetermination conditions can be found directly in theeNet SMART HOME app

Accept changes here from your tado° system if you have changed room designations, or have added or removed tado° devices in the tado° app

SETUPPARTNERSYSTEMS

Here you can remove your tado° professionaldevices from the eNet SMART HOME system

1

2

www.enet-smarthome.com

TechnicalSupportTel. +492195602123Fax +492195602118hotline@gira.de

TechnicalSupportTel. +492355806555Fax +492355806255kundencenter@jung.de

GiraGiersiepenGmbH&Co.KGDahlienstrasseP.O.Box122042477RadevormwaldGermanyTel. +4921956020Fax +492195602191www.gira.cominfo@gira.comJUNGAlbrechtJungGmbH&Co.KGVolmestraße158569SchalksmühleGermanyTel. +492355806553Fax +492355806254www.jung.deinternational@jung.deInstaGmbHHoheSteinert10P.O.Box183058468LüdenscheidGermanyTel. +4923519360www.insta.deinfo@insta.de

Sta

tus

10/2

018