Enervista v5.01 Recipe

Suncor Energy Inc.Packaging Recipe

Wise PackageSoftgrid SequenceApp V Sequence

Packaged/Sequenced By: Luis Eduardo Jardon Cubos.Date: November 22, 2011Application Name: Enervista v.5.01Application Vendor: GE Multilin IncInstallation Source: \\file001\App_Lib\DML\GE Multilin Inc\Enervista 5.01\MediaContent Folder location \\softprd001\content\Enervista501-TESTSequencer Version (only if using Softgrid or AppV):

3.2.1.9

Sequencer OS/Service Pack: XP SP3

Notes and pre-packaging requirementsUse the box below to describe what the application does here in high-level terms. Then describe any workarounds that were needed if any.

Use the box below to record application specific step by step installation and configuration instructions.

1. Browse to the media location and click “Enervista501.exe” (Installation media can be found at: \\file001\app_lib\DML\GE Multilin Inc\Enervista 5.01\Media

2. Click Run and wait as InstallShield Wizard extracts Enervista Launchpad


3. Click Next

4. Click Yes to Accept the License Agreement

5. Fill out the User Information and click Next

6. Click Next


7. Click Next and wait while the Enervista Launchpad is installed

8. Click Finish to complete installation of Launchpad

To Install 269 Plus Motor Management Relay1. Browse to the media location and double-click on 269setup607.exe

2. Click Run, and click Yes when prompted to confirm installation


3. Click Continue with 269PC version 6.07 installation. You may need to minimize the installation screen if this box is not visible

4. Click Next on the Welcome screen

5. Click Next to accept default Destination Directory

6. Click Next to perform Typical Install

7. Click Next to accept default


8. Click Next to start copying 269 files

9. Click Finish to complete installation

To install 350 Feeder Protection Relay1. Browse to the media location and double-click on SR3Setup141.exe

2. Click Run


3. Click Next on the SR3 Setup installation wizard

4. Click Yes to accept License Agreement

5. Click Next to accept default Destination Folder

6. Click Next to accept default program folder



To Install 369 Motor Management Relay1. Browse to the media location and double-click on 369Setup400.exe

2. Click Run






Installation Procedure for 469 Motor Management Relay


1. Browse to the media location and double-click on 469Setup511.exe

2. Click Run

3. Click Next on the Enervista 469 install Wizard

4. Click Yes to accept the License Agreement




Installation Procedure for 735/737 Feeder Relay1. Browse to the media location and double-click on 735setup200.exe

2. Click Run and wait while install wizard runs

3. Click Next on the Install Wizard screen


4. Click Yes to accept the license agreement

5. Click Next

6. Click Next to choose default path

7. Click Next to continue



Installation Procedure for 745 Transformer Management Relay1. Browse to the media location and double-click on 745setup520.exe

2. Click Run




5. Click Next to accept the default Destination Folder

6. Click Next to accept default Program Folder



Installation Procedure for 750/760 Feeder Management Relay1. Browse to the media location and double-click on 750Setup730.exe

2. Click Run




5. Click Next to accept the default Destination Folder



Installation Procedure for MIV II Voltage/Frequency M II Family Relay


1. Browse to the media location and double-click on MIIsetup260.exe

2. Click Run

3. Click Next

4. Click Next to accept default setting



6. Click Install

7. Click Next


Installation Procedure for RRTD Remote RTD Module


1. Browse to the media location and double-click on rtdsetup151.exe

2. Click Run

3. Click Yes to continue

4. Click continue with RTDPC version 1.51 installation. You may need to minimize the setup screen to view this window



6. Click Next to accept default setting

7. Click Next to accept default Setup Type




Installation Procedure for UR Family of Protection Relays1. Browse to the media location and double-click on ursetup590.exe

2. Click Run




5. Click Next

6. Click Next to accept default Destination path

7. Click Next


8. Click Next to accept License Agreement

9. Click Next



Installation Procedure for MM300 Motor Management System1. Browse to the media location and double-click on mm300Eng160.exe

2. Click Run

3. Click Next



5. Click Next to install to default location

6. Click Next to begin installation

7. Click Next

8. Click Yes to accept the license agreement


9. Click Next to accept default destination

10. Click Next


Installation Procedure for MM2 Motor Management System

1.-Access to the media folder and execute the mm2setup512.exe.


2.-Click Run in the Security Warning message.

3.-Click Next.


4.-Click Yes.


5.-Click Next.

6.-Click Next.


7.-Click Finish.

Post-InstallationPerform final review prior to saving Package.

Record any additional information or actions that may be required:

All setup shortcuts can be removed as they can be accessed from the Enervista Launchpad application

Enervista v5.01 Recipe

Documents

Transcript of Enervista v5.01 Recipe