Energy Conservation Control System (ECCS) AIR … › swts_content_files_nas › ...Energy...
Transcript of Energy Conservation Control System (ECCS) AIR … › swts_content_files_nas › ...Energy...
Energy Conservation Control System (ECCS) AIR ENERGYS Y S T E M S
4790 West 73rd Street I Indianapolis, Indiana 46268 Phone: 317-290-8500 I Fax: 317-290-1900 www.aesrack.com
Significantly reduce your carbon footprint by utilizing Air Energy Systems’ patented ECCS control system.
The conventional 80/20 unit is designed to operate on 80% re-circulated inside facility air and 20% fresh outside air.
By installing Air Energy Systems’ patented ECCS to any conventional 80/20 unit, the equipment can function in a 100% re-circulation cycle during the unoccupied mode. Operationally, the Energy Conservation Control System elimates 20% of outside air from coming into the facility. Valuable heating dollars are saved by reducing the need to warm unnecessary air.
Conventional 80/20 Re-circulation Unit
Occupied Mode
Conventional 80/20 Unit Utilizing the ECCS Control Panel & Inlet Damper
Unoccupied Mode
Air Energy Systems, Inc. Bill Maher [email protected]
Building owners can save up to 40% in natural gas expense during unoccupied operation. Our control system works with any
manufacturer’s new or existing direct fired 80/20 equipment.Absolute Aire • Applied Air • Engineered Air • Greenheck • Modine • Reznor • Rupp Air • Titan Air • Weather Rite
Patent Pending #61229795
20% Outside Air
80% Return Plant Air
Inlet Damper Open-Burner Operational
0% Outside Air
100% Return Plant Air
Inlet Damper Closed-Burner Locked Out
Remote Control PanelMounted in Space
(column or wall)
Energy Conservation Control System (ECCS) AIR ENERGYS Y S T E M S
4790 West 73rd Street I Indianapolis, Indiana 46268 Phone: 317-290-8500 I Fax: 317-290-1900 www.aesrack.com
Air Energy Systems, Inc. Bill Maher [email protected]
Patent Pending #61229795
SEASON SWITCHThe Season Switch sets the operation of the unit. In the Off operation the blower and burner circuits open and will not operate. In the Summer operation the blower will operate and the burner circuit will open and not operate. In the Winter operation the blower and burner will operate. This is the only cycle that will use the Mode Switch and ECCS System.
MODE SWITCHThe Mode Switch sets the mode of the unit during the Winter operation. The Occupied mode will bypass the Occupied Time Clock and Unoccupied Thermostat locking the unit into the Occupied mode. The Auto mode will use the Occupied Time Clock to switch between the Occupied and Unoccupied modes using the programming. The Unoccupied mode will Bypass the Occupied Thermostat and Occupied Time Clock locking the unit into the Unoccupied mode.
Exterior Panel
Unoccupied Thermostat
OccupiedTime Clock
Occupied Thermostat
Field WireInstructions
Relays
Terminal Blocks
Interior Panel
Season Switch
Mode Switch