Endress+Hauser temperature transmitter first with user-friendly … · 2021. 2. 22. · Press...
29
1 Documento del Piano dell’Intesa Formativa CLASSE 1H a. s. 2018/2019 1. Presentazione della classe Numero studenti: 26 provenienti dalla stessa classe: provenienti da altre classi Einstein: 1 provenienti da altri istituti: 1 ripetenti: 1 2. Gruppo Docenti e situazione iniziale della classe Relig. Italiano Latino Storia Lingua straniera Matemat. Scienze Disegno Educaz. Fisica Continuità docente (se prevista ) Livello partenza ( A= adeguato / NA = non adeguato ) NA A PA NA NA PA A PA Comportamento ( A= adeguato / NA = non adeguato ) A A A A A A A PA 3. Programmazione del consiglio di classe OBIETTIVI COGNITIVI : Conoscere i contenuti specifici delle singole discipline, così da costruire un consolidato ed omogeneo bagaglio culturale. Saper esporre, oralmente e per iscritto, in modo chiaro, argomentando coerentemente le proprie idee. Saper utilizzare i linguaggi specifici di ciascuna disciplina. Saper rielaborare i contenuti in maniera personale. Saper effettuare sintesi attingendo a conoscenze disciplinari diverse. Saper utilizzare le conoscenze assimilate e, mediante riferimenti critici, giungere ad una motivata e pertinente opinione. OBIETTIVI FORMATIVI : Maturare un atteggiamento rispettoso di sé e degli altri, per contribuire all’instaurarsi di sereni e costruttivi rapporti interpersonali all’interno della classe. Collaborare in modo propositivo con gli insegnanti e i compagni, perché il lavoro scolastico sia proficuo e rappresenti uno strumento di miglioramento personale e collettivo. Essere parte attiva e responsabile nella costruzione del proprio percorso formativo. Mantenere gli impegni con costanza e determinazione in vista del raggiungimento degli obiettivi prefissati. 4. Programmazione di ciascuna disciplina ( si vedano gli allegati della programmazione di ciascun docente )
Transcript of Endress+Hauser temperature transmitter first with user-friendly … · 2021. 2. 22. · Press...
Press ReleaseFebruary 2021
1/2
Endress+Hauser temperature transmitter first with user-friendly Bluetooth®
access
Burlington, ON – The new Endress+Hauser TMT142B HART®7 smart temperature transmitter incorporates Bluetooth® wireless communications – a world-first for this class of field devices – to make operating, parameterizing and maintaining the unit extremely user friendly. That’s a significant benefit for technical staff managing sensor/transmitter assemblies located in hard-to-see-or-access locations, as is often the case.
With Bluetooth® on board, the TMT142B can be commissioned, operated and serviced wirelessly using the Endress+Hauser SmartBlue app on any IOS, Android or Windows device from as far away as 20 metres.
Fast, easy wireless access can translate into significant improvements in process efficiency and plant availability while, at the same time, reducing costs. The TMT142B can be configured wirelessly without needing to pre-install its device drivers, since they are incorporated into the transmitter. Access to the device is password-protected and the Endress+Hauser security concept for Bluetooth® communication complies with the highest security standards.
The single-channel TMT142B transmitter delivers highly accurate and reliable measurements and is packaged in a robust single-chamber field housing. It has a newly developed backlit display that provides excellent readability under all environmental conditions, from darkness to strong sunlight.
The TMT142B’s integrated overvoltage protection assures continued accurate measurement even after common upset events and protects against damage.
The unit guarantees a high level of measuring point availability through integrated sensor monitoring functions and device diagnostics. Diagnostic information is available to the user in accordance with NAMUR NE 107, Condensed Status Diagnostic messages are indicated through variable backlight color (white to red). The TMT142B transmits converted signals from resistance sensors (RTD), thermocouples (TC), resistances (Ω) and voltage transmitters (mV) via the 4 to 20 mA or HART®7 protocols. The transmitter-sensor matching capability using the Callendar-Van Dusen coefficients further improves the entire assembly’s precision.
The TMT142B is designed for safe operation in hazardous areas as certified by international approvals (ATEX, CSA C/US, IECEx).
About Endress+HauserEndress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial process engineering. Our products – sensors, instruments, systems and services for level, flow, pressure and temperature measurement as well as analytics and data acquisition – set standards in
Press ReleaseFebruary 2021
2/2
quality and technology. The company further supports its customers with automation engineering, logistics and IT services and solutions. Founded in 1953 by Georg H Endress and Ludwig Hauser, the Endress+Hauser Group has been solely owned by the Endress family since 1975. Today, the Group is managed and coordinated by a holding company based in Reinach, Switzerland, employing more than 14,300 personnel across the globe. In 2019, the Group generated net sales of over 2.65 billion euros. Endress+Hauser’s production centres in 12 countries meet customers’ needs and requirements quickly and effectively, while our dedicated sales centres and strong partner network guarantee competent worldwide support.
Press Photo (one image – see attachment):
Caption: Endress+Hauser’s new TMT142B temperature transmitter has Bluetooth® on board, making it much easier to parameterize, operate and maintain the unit wirelessly from up to 20 metres away.
Contacts: Gail Brathwaite Martin Wendland Marketing Events Coordinator PR Toolbox Inc. Endress+Hauser Canada Ltd. 126 Neville Park Blvd. +1 905 681 4372 Toronto, ON M4E 3P8 [email protected] +1 416 830 8797 Website: www.ca.endress.com [email protected]
