Endeavour Tools Catalogue

16
Max Light Less than 2kgs! Max Quiet 97.3 dBA australia s most powerful impact wrench in its class NEW Twin Hammer next generation air tools The Black Rattler 24 MONTH WARRANTY Made In Japan TM Metric HEX: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10MM $29.95 ETHEX-10-MET NEW TORX: T10, T15, T20, T25, T27, T30, T40, T45, T50 $29.95 ETTORX-10 NEW Imperial HEX: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" $29.95 ETHEX-10-IMP NEW TM MADE IN DENMARK • Ideal for general use and keeping work areas clean & tidy. • Max Working Pressure: 232 PSI (16 bar). 8mm Bent Pipe Blow Gun $15.95 124140101 $39.95 PT-200 • Up to 50% more force in twisting applications. • Cushion grip reduces slippage. • Thumb release provides for easy one handed use. Opening: 0-40mm (0 - 1-5/8”) Length: 180mm Weight: 375g Prices Valid: 01/02/12 till 27/04/12. ©2011 Endeavour Tools $49.95 727-08 Made in Spain Extra Long Hex | Torx Key Sets With Magnetiser (10 pce) Ergo Grip Ergo Grip Locking Plier Up to 50% more torque Up to 50% more torque Anti Slip Anti Slip Gas Torch • Auto ignition and safety switch. • Up to 60 minutes of use (20 ml tank). Torch Temp: 1300ºC Butane Heat Tools 1 FEBRUARY - 27 APRIL 2012 All Prices Include GST Splash NEW 1,200 ft lbs / 1,627Nm Breakaway Torque Max Power $395.00 RMAX1200 NEW

description

Summer splash catalogue

Transcript of Endeavour Tools Catalogue

Page 1: Endeavour Tools Catalogue

Max LightLess than 2kgs!

Max Quiet97.3 dBA

aust

rali

a’s

mo

st p

ow

erfu

l im

pact

wre

nch

in it

s cl

ass

NEW

Twin

Hammer

next generation air toolsThe Black Rattler

24 MONTH WARRANTY

Made In Japan TM

MetricHEX: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10MM

$29.95ETHEX-10-MET

NEW

TORX: T10, T15, T20, T25, T27, T30, T40, T45, T50

$29.95ETTORX-10

NEW

ImperialHEX: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"

$29.95ETHEX-10-IMP

NEW

TM

MADE IN DENMARK

• Ideal for general use and keeping work areas clean & tidy.• Max Working Pressure: 232 PSI (16 bar).

8mm Bent PipeBlow Gun

$15.95124140101

$39.95PT-200

• Up to 50% more force in twisting applications. • Cushion grip reduces slippage.• Thumb release provides for easy one handed use.

Opening: 0-40mm (0 - 1-5/8”)Length: 180mmWeight: 375g

Pric

es V

alid

: 01/

02/1

2 til

l 27/

04/1

2. ©

2011

End

eavo

ur T

ools

$49.95727-08

Made in Spain

Extra Long Hex | Torx Key Sets

With Magnetiser (10 pce)

Ergo GripErgo Grip Locking Plier

Up to 50%

moretorque

Up to 50%

more

torque

Anti SlipAnti Slip

Gas Torch• Auto ignition and safety switch.• Up to 60 minutes of use (20 ml tank).

Torch Temp: 1300ºC

Butane Heat Tools

1 FEBRUARY - 27 APRIL 2012All Prices Include GST

Splash

NEW

1,200 ft lbs / 1,627NmBreakaway Torque

Max Power

$395.00RMAX1200

NEW

Page 2: Endeavour Tools Catalogue

1/2” Drv Hub Nut Removal Set (6pce)

Impact Wrenches

Air Die Grinders

Air Chisel

2 Another Quality Range From Endeavour Tools

• Free Speed: 25,000 rpm• Weight: 0.60 Kg• Length: 165mm• Avg Air Cons: 2.7CFM

• All popular sizes: 17, 19, 21, 22, 27mm

Industrial GradeJapanese QualitySuperior Performance

12 Month parts & labour warrantyon all Endeavour Air Tools

$178.95E2001S

• Free Speed: 25,000 rpm• Weight: 0.37 Kg• Length: 165 mm• Avg Air Cons: 4.0 CFM

$178.95E2011S

$189.00E4120

Breakaway Torque: 500 ft. lbs / 678 Nm• Working Torque: 25-350 ft. lbs / 34-475 Nm• Weight: 2.4 lbs / 1.09 kg• Avg Air Consumption: 4.5 cfm• Sound Level: 93.5 dBA• Overall Length: 5-3/4”• Air Inlet: 1/4”• Recommended Hose Size: 3/8”

Breakaway Torque: 1,200 ft. lbs / 1,627 Nm• Working Torque: 50-800 ft. lbs / 68-1,085 Nm• Weight: 4 lbs / 1.8 kg• Avg Air Consumption: 4.9 cfm• Sound Level: 97.3 dBA• Overall Length: 6-7/8”• Air Inlet: 1/4”• Recommended Hose Size: 3/8”

$79.00ET1031

NEW

$395.00RMAX1200

NEW

$359.00RMAX500

NEW

1/4”COLLET

1/4”COLLET

Small

Medium

Easily remove damaged hub nuts

1/2”

3/8”

NEW

• Chisel Shank: 10.2mm dia• Blows/Min: 2,600• Stroke Length: 10mm• Avg Air Cons: 3.0 CFM

Air Chisel Hammer

composite

next generation air tools

The Black

Rattler

24 MONTH WARRANTY

$419.00RMAX1200-EXT

NEW

2” Extended Anvil

New cutting edge technology from Endeavour delivers class leading power in a super lightweight, low noisetool.

Patened trigger design allows one handed operation. Variable speed trigger delivers accurate use. All backedby a comprehensive 24 month warranty.

Page 3: Endeavour Tools Catalogue

1/2” Drive (5 pce) Chrome Moly | Impact

1/2” Drive (3 pce)Chrome Moly | Impact

Ratchet Wrenches

Impact Grade Quick Release Adaptors

• Max Torque: 22 ft.lbs / 30 Nm• Avg Air Cons: 1.8 CFM• Overall Length: 125mm

3Prices Valid: 01/02/12 till 27/04/12

Air Saw

Wheel Nut Sockets

• Capacity: 3mm mild steel• Stroke/Min: 10,000• Stroke Length: 10mm

• Max Torque: 22 ft.lbs / 30 Nm• Avg Air Cons: 1.8 CFM• Overall Length: 125mm

WOBBLE

• 17mm • 19mm • 21mm • 22mm • 27mm

• 17mm • 19mm • 21mm

Breakaway Torque: 1,800 ft. lbs / 2,440 Nm• Working Torque: 100-1,000 ft. lbs / 13-1,356 Nm• Weight: 6.85 lbs / 3.1 kg• Avg Air Consumption: 6.9 cfm• Sound Level: 97.3 dBA• Overall Length: 8”• Air Inlet: 3/8”• Recommended Hose Size: 1/2”

BONUSAir Saw Blades

BONUS1/4” HEX Quick

Release

Adaptor

BONUS10mm HEX Quick

Release

Adaptor

$295.00E4700BP

BONUS

$199.00E1107BP

BONUS

$199.00E1108BP

BONUS

$799.00RMAX1800

NEW

1/4”SQ DRV

3/8”SQ DRV

3/8”SQ DRV

10mm

1/4”SQ DRV

1/4”

3/8”SQ DRV

1/4”

3/4”

$19.95ET3M10

$19.95ET3S08

$64.95ETK5

$39.95ETK3

$19.95ET2S08

NEW

24 MONTH WARRANTY

aust

rali

a’s

mo

st p

ow

erfu

l im

pac

t w

ren

ch

in

its

cla

ss

6” Extended Anvil

$819.00RMAX1800-EXT

NEW

Page 4: Endeavour Tools Catalogue

Aluminium ratchet handle with double �exible joints. Includes 19 popular bits & 1/4” square drive adaptor

Analogue Torque Wrenches• Premium quality (ISO 6789 compliant)• Calibration certificate included (+/- 3% accuracy)• Easy to use with pull-push torque setting mechanism• Easy to read window scale

Aluminium Ratcheting Bit Holder & Bit Set

Composite sharks teeth spanner rack with magnetic strips. Two piece 385mmand 425mm lengths, holdsup to 20 spanners.

Magnetic Sharks Teeth Spanner Rack (2pce)

4 Another Quality Range From Endeavour Tools

Great for tool boxes, car boots, boats, home & factory.

• Overall length: 940mm• Tang thru• Square shank

Non-Slip Mats

Jumbo Pry Bar

Size: 45 x 195mm Size: 60 x 195mm

• Chrome Vanadium shaft.• Replacement heads available.

Ratcheting Breaker Bars

• Drop forged steel • Heat treated blades• High impact handles

4pce Pry Bar Set

600mm450mm

300mm

200mm

The Torque Specialists

Convert your ratchet wrench into a socket driver / bit holder

1/4” Square Drive10mm Wrench

3/8” Square Drive17mm Wrench

1/2” Square Drive19mm Wrench

1/4” Bit Holder10mm Wrench

10mm Bit Holder10mm Wrench

Bit HoldersSocket Drivers

• Magnetic spanner rack with protective foam backing, ideal for tool chests or any ferrous surface.• Holds up to 12 spanners for easy size identification.• Can also be wall mounted.

Quality Tools - Designed to Last - Made In Taiwan

te

3/8”Torque Range:20-110 Nm (15-81 ft.lbs)OL: 403mm

BONUS3/8” Breaker

Bar

1/2”Torque Range:30-210 Nm (22-155 ft.lbs)OL: 490mm

BONUS1/2” Breaker

Bar

3/4”Torque Range:140-700 Nm (50-500 ft.lbs)OL: 1032mm

BONUS3/4” Breaker

Bar

1/2”Torque Range:50-350 Nm (37-258 ft.lbs)OL: 625mm

BONUS1/2” Breaker

Bar $499.00ARD500BB

$189.00ARD250BB

$159.00ARD150BB

$149.00ARD080BB

3/8” SQ DRV

600mmOL

450mmOL

1/2” SQ DRV

MAGNETIC

MAGNETIC

Magnetic Spanner Rack

$13.95DA0045

$18.95DA0060

$34.95AL-BTH21

$27.95DA1237

$55.95ET1206

$49.95ET1205

$19.95ETWR03

NEW

$19.95RA-5

$17.95ETWR02

NEW$48.95

DA1225NEW

Page 5: Endeavour Tools Catalogue

Flexible

-SN LIO PN

Ratchet Wrench Sets

XL Flat Ratchet Wrenches

Quality Tools - Designed to Last - Made In Taiwan

Quality Tools - Designed to Last - Made In Taiwan

Metric (12 pce)8, 9, 10, 11, 12, 13, 14,

15, 16, 17, 18, 19mm

Imperial (7 pce)5/16, 3/8, 7/16, 1/2

9/16, 5/8, 3/4”

Metric (7 pce)8, 10, 12, 13, 14

17, 19mm

Metric (7 pce)8, 10, 12, 13, 14

17, 19mm5/16, 3/8, 7/16, 1/2

9/16, 5/8, 3/4”

Imperial (7 pce)8, 9, 10, 11, 12, 13, 14,

15, 16, 17, 18, 19mm

Metric (12 pce)

Chrome Vanadium mirror polished finish. Extra long length to reach into narrow and deep spaces.

ALL KABO WRENCHES FEATURE SPHERICAL DRIVE & LIFETIME WARRANTY

6-Point 6-Point 50%rounded o� Star Square Spline12-Point

Packaged inEVA Trays

5Prices Valid: 01/02/12 till 27/04/12

Wrench Sizes:8 x 10mm12 x 14mm13 x 15mm16 x 18mm17 x 19mm

XLB5-MET

Overall Length:250mm330mm330mm375mm405mm

5pcs Metric Set

XLB4-IMP

Wrench Sizes:5/16” x 3/8”7/16” x 1/2”9/16” x 5/8”11/16” x 3/4”

Overall Length:215mm285mm350mm405mm

4pcs Imperial Set

Reversible 15º O�set

Wrench Sizes:21 x 22mm24 x 27mm

Overall Length:425mm465mm

XLB2-MET

2pcs Metric Set

5/16, 3/8, 7/16, 1/29/16,5/8, 3/4”

Imperial (7 pce)8, 10, 12, 13, 14

17,19mm

Metric (7 pce)8, 9, 10, 11, 12, 13, 14,

15, 16, 17, 18, 19mm

Metric (12 pce)

Stubby

$139.95PFFK7-MET

BONUS

$189.95

$149.95

$89.95

$199.95PFFK12-MET

BONUS$139.95PFFK7-IMP

BONUS

Combination

-SN LIO PN

Metric (12 pce)8, 9, 10, 11, 12, 13, 14,

15, 16, 17, 18, 19mm

$169.95PFZK-12VP

BONUS

$119.95PFG7-MET

BONUS $189.95PFG12-MET

BONUS$119.95PFG7-IMP

BONUS

$99.95PFT7-MET

BONUS $169.95PFT12-MET

BONUS$99.95PFT7-IMP

BONUS

BONUSWR02

BONUSWR02

BONUSWR02

BONUSWR02

FlatExtra LongSpherical Drive EVA Packaging

Page 6: Endeavour Tools Catalogue

• Jaw openings 5-7mm & 6-9mm• Hardened shafts

Clip Removal Tool Set

• Strikes blow when pressure applied• Cap adjusts force of blow• Extra hard steel tip - replacement tips available

Auto Centre Punch

• Premium Quality - Made In Japan• Famous for its comfortable handle • For Industrial, Automotive & Professional Use

• Hardened 350mm long square steel blade• Tang thru design (can be struck with hammer to loosen screws)• 9.5mm wide slotted tip

Extra Long “Tang Thru” Driver

• Ideal for pulling out vehicle hoses.• Blade is made of a hardened steel.• Comfortable cushion grip.• O.L.: 215mm

Hose Remover

Scraper Set (2 Pce)• Ideal for scraping dried paint, rubbing o� rust or carving aerated concrete• Tang thru type can be used with hammer• Durable for heavy impact work• Scraper width: 16mm & 21mm

6 Another Quality Range From Endeavour Tools

Torx® Security Screwdriver Sets (6 pce)High quality steel shank with hardened tip. Screwdrivers drive both standard & security Torx® screws

Sizes: T10H, T15H, T20H, T25H, T27H, T30H

Extra Long Length (250mm Blade)

Regular Length (150mm blade)Sizes: T10H, T15H, T20H, T25H, T27H, T30H

Now in EVA Trays

• Phillips: #1 X 75mm, #2 X 150mm, #3 X 150mm • Slotted: 5.5 X 75mm, 6.0 X 100mm, 8.0 X 150mm

Magnetised & Tang-Thru Screwdriver Set (6 pce)

Quality Plastic Casewith EVA Insert

BONUS98

The Screwdriver Specialists

$26.95380385

$24.95H-611

$25.95CT-610

$44.95185

$24.95215-9-5X350

$68.95888-6V98PC

BONUS

$94.95222-C-TH/6KLNG

$74.95222-C-TH/6K

Page 7: Endeavour Tools Catalogue

Screwdriver set with double ended interchangeable 300mm blades. One end Torx® (Sec) (6 sided), other end Torx Plus® (Sec) (5 sided). Sizes T10 | T15 | T20 | T27 | T30 | T40

Ribe (32 Pce)

• 9 x 55mm (M5 to M14)• 9 x 100mm (M5 to M14) • 7 x 140mm (M8 to M14) • 7 x 200mm (M8 to M14).

Torx® Plus Tamperproof Bit Sockets• 1/4” Drive Bit Sockets TS8H, TS15H, TS20H, TS25H, TS27H, TS30H. • 3/8” Drive Bit Sockets TS40H, TS45H, TS50H, TS55H.

S2 Steel quality!

S2 Steel Mechanic’s Bit Set (40 pce)Includes popular sizes of Torx, Spline and Hex bits, plus 10mm Hex bit holders in 3/8” and 1/2" drive.

Hex Spline Torx®

8 x 55mm : M5, M6, M8, M9, M10, M12, M14, M167 x 100mm : M5, M6, M8, M9, M10, M12, M147 x 140mm : M5, M6, M8, M9, M10, M12, M144 x 200mm : M8, M10, M12, M14

9 x 55mm : 5, 6, 7, 8, 10, 12, 14, 17, 19 mm | 8 x 100mm : 5, 6, 7, 8, 10, 11, 12, 13 mm |7 x 140mm : 5, 6, 7, 8, 10, 12, 14 mm | 6 x 200mm: 5, 6, 7, 8, 10, 12 mm

Spline (26 pce)

Hexagon (30 pce)

7Prices Valid: 01/02/12 till 27/04/12

Torx® (Sec)/ Torx Plus® (Sec) Drivers (7 pce)

• Ball Type Universal Joint 35-3118• 3/8”F x 1/4”M Adaptor 35-3119• 3/8”F x 1/2”M Adaptor 35-3120

3pce Adaptors & Universal Joint Set

• Ball Type Universal Joint 45-4118• 1/2”F x 3/8”M Adaptor 45-4119• 1/2”F x 3/4”M Adaptor 45-4120

3pce Adaptors & Universal Joint Set

A2 Steel / Magnetised 10 PacksBITS Bonanza

50mm Power Bits50PH1A10PK Phillips #1 9 .95

10 Pack

50PH2A10PK Phillips #2 9 .95

10 Pack

9 .9510 Pack

50PH2ADE10PKPhillips #2 D/E

50PZ2A10PKPozidrive #2 9 .95

10 Pack

50PZ1A10PKPozidrive #1 9 .95

10 Pack

50H5A10PKHex 5mm 9 .95

10 Pack

9 .9510 Pack

50RS2A10PKSquare #2

300mm long300mm long

Bit Socket Sets (1/2” Drv)

• Ball Type Universal Joint 25-2118• 1/4”F x 3/8”M Adaptor 25-2119• Hex Insert Bit Holder 25-2131

3pce Adaptor, Universal Joint and Bit Holder Set

1/4”SQ DRV

3/8”SQ DRV

1/2”SQ DRV

$59.95ET9342

NEW

$134.95ET2106

$124.95ET2104

$124.95ET2103

$29.9535-3PCSET

$39.9545-3PCSET

$64.95ET1319

$26.9525-3PCSET

$32.9511PC-25B

Page 8: Endeavour Tools Catalogue

8 Another Quality Range From Endeavour Tools

$63.95124145100

• Cleans places which are difficult to access• Max Working Pressure: 232 PSI (16 bar)

• Special hardened nozzle.• Removes corrosion, old paint, dirt, etc.• Adjustable nozzle regulates quantity of sand.

Air Sand Blasting Gun

Flat Nozzle• Flat nozzle generates a quiet, efficient, regulated distribution of compressed air• Designed for drying, cleaning and cooling purposes

• Safety nozzle & noise suppressor meet OH & S requirements for safe & reliable use• Noise level 76db at 6 bar inlet pressure• Non block tip prevents “Dead Hand”• Max Working Pressure: 232 PSI (16 bar)

Safety

$29.95 $34.95 $43.95 $149.95 $169.95124140112 124140113 124140114 124140183 124140184

DURABLE & STRONGMade from acetal plastic that’s harder than brass

LEAK FREE VALVE SYSTEMGuaranteed even after 10 million operations

PRECISE AIR FLOWInfinitely adjustable trigger system

TM

MADE IN DENMARK

Blow Guns

Extra Long Air Blow Guns

Cleaning GUNS

300mm 500mm 1m 1.5m 2m

316 Stainless Pipe

Endeavour Filter Regulators

Maximum airflow: 2,200 l / min

Maximum airflow: 3,000 l / min

• Maximum input pressure: 215 PSI• Maximum output pressure: 150 PSI• Bowl capacity: 55ml

1/4” BSP

1/4” BSP

3/8” BSP

50 Series Mini SeriesMaximum airflow: 1,100 l / min

• Maximum input pressure: 280 PSI• Maximum output pressure: 227 PSI• Bowl capacity: 15ml

• Adjustable nozzle regulates the amount of cleaning agent applied. • Thermoplastic tank is resistant to most chemicals (except solvent based).

260mm Metal Pipe Engine Cleaning Gun

• Fitted with a standard 13mm water coupling• Produces no splash-back, preventing the user from getting wet• Trigger easily regulates pressure• Uses 4 - 8 litres of water per minute

Air & Water

$59.95124142100

$25.95124140125

$39.95124142180

$29.95124140026

$74.95EFR502A

$77.95EFR503A

$54.95EFR212A

Page 9: Endeavour Tools Catalogue

9Prices Valid: 01/02/12 till 27/04/12

Oil & Coolant Oil Filter Wrenches

Sizes:• Hex: 8, 9, 10, 12, 14, 17mm• Square: 7, 8, 10, 11, 12, 13, 14mm• Square: 5/16”, 3/8” • 10mm Square (Female)• M16 Spline Security• Triangular (10mm)

Oil Drain Plug Key Set (18 Pce)

• Use either hand pump, or airline to extract fluid.• Avoids the need to remove the drain plug.• 10L capacity.

• 4 suction tubes included - 7mm steel oil - 6mm oil - Brake fluid connector - 10mm gear oil

Air / Manual Oil Extractor• New cup style avoids damage to filter housing. • Suits most popular vehicles, including Toyota.• 3/8” Drive

Cup Style Oil FilterWrench Set (9 pce)

$149.95ET9024

Nylon Strap Oil Filter WrenchSturdy non-slip nylon strap. Handles spin-type filters up to 6” (150mm) diameter. For use with 1/2” drive tools.

BMW Cooler Line PliersEasily release hydraulic cooling lines on most BMW E & R series engines.

Oil Pan Separator ToolWide, tapered, round blade edges between metal surfaces to break gasket seals on engine pumps, transmissions or any difficult to separate gasket joints.Blade width: 42mmLength: 70mm

Oil Drain Plug Thread Repair KitIncludes:• Tap. • Screws (x6). • Washers (x12).

Suits Toyota & Lexus

$26.95ET1130

$38.95ET1243

Suits BMW /Volvo models

Suits GM 2.2L Ecotech &Mercedes HGVs

Suits Mercedes, BMW, Ford 6L Diesel

Suits Mercedes

$26.95ET1131

Suits Mercedes, Mazda 3 & others

Suits genuineToyota D2 oil filter

M13 x 1.25P M15 x 1.25P M17 x 1.25P

$12.95DA6686

$26.95ET2220E

$26.95ET2220D

$247.95ET3586

$29.95ET8011-01

$30.95ET8011-03

NEW $33.95ET8011-06

NEW

$26.95ET1370

NEW

$26.95ET9001

NEW

Quality Alloy Steel!Quality Alloy Steel!

73MM

14FLUTES

64.5MM

14PT

74MM

14FLUTES

86MM

32MM

36MM

16FLUTES

84MM

14FLUTES

$98.95ET1356

$74.95ET1236

BONUS

$29.95ET2114

BONUSWR02

Page 10: Endeavour Tools Catalogue

ItemsPrices

hot

10

Wire Piercing Guide Clip

$5.95ET3005

NEW

High Tension System Testers

Electrical

EFI Test Light Kit

Solderpro 70 Kit

Car / Truck Tyre Pressure Gauge

Reads up to150 PSI

Solar powered

Solderpro 150 Kit

Flameless Heat Shrink Gun

Universal Line Kit

Contains a 70W butanepowered iron, 4 extra tips

and more. A well priced tool for the trade user. 4-in-1

functionality and a 20ml tank.

• Includes a �bre-optic extension for viewing from driver’s seat.• Seven noid lights for testing GM, PFI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, GM MULTEC 2. • Two IAC signal test lights.

• Measures up to 150 PSI (ideal for trucks).• 4 unit conversion (PSI / Bar / KPa / Kg /cm).• With LED light, and dual solar panel / lithium battery.

Top of the rangebutane iron with auto

ignition with 2 removable and refillable LEC (liquid

energy cells). Includessolder and more.

Auto ignition with safety locking switch.Powered by Iroda RC-30 re�llable Fuel Cell or

readily available disposable lighter.Heat temperature

up to 650°C.

The Ultimate Circuit TesterConnect a Power Probe III to the vehicle's battery and you'll have a multitude of testers at your �ngertips...

• Volt Meter: backlit voltmeter reads up to 70V.• Continuity tester: for switches or relays.• Long lead: supplied with a 20ft lead.

® III

Comprehensive kit for quickly & securely connecting into wiring. Over 86 leads.

• 2 way LED testers.• Black / red multimeter connector leads.• Male / female round terminal to banana plug.• Male / female flat blade terminal to banana plug.• Variable resistors with banana terminals.• Needle / piercing probes.• Heavy duty alligator clips.

Terminal Kit with Ratchet Crimper (552 Pce)

Heat Shrink Kit (180 Pce)• Colour coded heat shrink tubes from 2mm to 9mm diameter.• Diameter will reduce by up to 50% when heated to 125°C.

• Ratcheting crimping tool with laminated steel jaws and insulated grips.• 500 assorted terminals, 50 cable ties and insulating tape.

• Clip design protects tools.• Easier to grip than plain wires.• Suits vehicles with Clarion, Sony, Blaupunkt systems.

Folding Radio Removal Kit(2 Pce)

$69.95PRO-70K

BONUS BONUSET1800

Heat Shrink

(180 Pce)

BONUSET3005

Wire Piercing

Guide Clip

BONUSET3005

Wire Piercing

Guide Clip

$69.95ET9894

BONUS

$74.95ET8048

NEW$19.95ET1800

NEW

$94.95ET1117

NEW

$36.95MJ-600

$19.95ET1335

$199.95ETPP319FTC

$239.95ET2031B

BONUS

$149.95PRO-150K

BONUS

$16.95DA1291

42V Circuit TesterFor Hybrids

$25.95ET1330

Computer Safe Circuit Tester (3-15V)

$13.50DA1418

BONUSET1330

Hybrid Tester

Page 11: Endeavour Tools Catalogue

11

ItemsPrices

hot

A universal air powered kit toremove the disc calipers on most vehicles.

Air Powered Disc Caliper Wind Back Kit

Wind back disc brake pistons onAudi, Rover, Ford, Peugeot, VW, Nissan &Subaru vehicles

Brake Spreader

Brake & Fluid Hose Clamp

Updated adaptor set for domestic imported vehicles to suit later model cars.

Master Cylinder Pressure Bleeder Adaptor Sets

• Single person operation for quickly / cleanly bleeding brakes.

Air Brake Bleeder

• 0.375L

Air Brake BleederReplenishment Bottle

Hand operated pump generates airpressure inside the tank allowingbrake bleeder to be used away from permanent air connections.3.5 litre capacity

Hand Operated Pressure Style Brake Bleeder

Original universal adaptor set for European / Japanese vehicles.

$13.95DA9031

TM

MADE IN DENMARK

$169.95ET5613

BONUS

Small Brake Spoon (124mm)

Tyre Repair KitFor Steel Belted Radials

$39.95DA3710

Digital Brake Fluid Tester

$49.95ET1333

$39.95DA5556

$119.95ETWH505H

$249.95ETWH500C

$189.95ETWH500CN

$8.95DA5533

Self Gripping Pullers

Capacity: 1.1 tonnesSpread: 80mmReach: 90mm

Capacity: 1.1 tonnesSpread: 150mmReach: 150mm

Capacity: 1.7 tonnesSpread: 200mmReach: 200mm

$89.95ET8076-01

$109.95ET8076-02

$139.95ET8076-03

$34.95124143150

$94.95124143100

BONUSET1333

Brake Fluid Tester

Spring Loaded

Page 12: Endeavour Tools Catalogue

Essential Diesel Tools

Mercedes Glow Plug Puller & Reamer Set

Damaged Glow Plug Removal Set (19 Pce)

Extra Long Glow Plug Socket Set (6 Pce)

Glow Plug Connector Pliers

Direct Access

90º Angle

12 Another Quality Range From Endeavour Tools

Diesel Injector Seat Cutter Set• Cleans / recuts injector seats of modern common rail diesel engines. • 4 reamers included 19mm �at (Benz CRD), 17mm �at (BMW, PSA, Renault), 15mm �at (most trucks), 19mm angled (Fiat / Iveco).

• Removes damaged & broken glow plugs from cylinder heads.• Suitable for glow plugs with an M8 x 1.0mm thread.

• Rubber socket insert grips ceramic insulation / helps with extracting plug.• Sizes: 8, 9, 10, 12, 14, 16mm• 3/8” Drv | 150mm long

• Recommended for use when �tting new or re�tting original glow plugs. • Sizes M10 & M12 (2 lengths)• Manufactured from Chrome Moly steel & titanium coated• Suitable for removing engine carbon deposits.

For removing glow plug connectors on late model diesel engines, including Mercedes, VAG, BMW.

21x90mm: Ford Duratorq (Mondeo / Transit) | 22x80mm | 22x110mm | 27x80mm | 28x80mm | 28x83mm VM 2.4D / 2.5D Alfa ,Chrysler, Land Rover, Rover engines.

Suitable for Titania and Zirconia oxygen sensors found on mostmodern vehicles.

Removes the copper injector seal when it is stuckin the head. Adjusts to allow seals with 7.5-10mm internal diameter to be removed.

Injector Seal Removal Tool

Diesel Injector Sockets 1/2" Drv (6 Pcs)

Di�cult to Reach Sensor Sockets (6 Pce)

Common Rail Diesel Injector Flow Test Kit

Oxygen Sensor Socket Master Kit (11 Pce)

Diesel Injection Leak Back Master Kit

• Measures return fuel �ow on diesel vehicles with up to 6 cylinders.• With measurement tubes for short term tests, and bottles for longer / more accurate tests.

• Measures return fuel �ow on diesel vehicles with up to 6 cylinders to identify faulty injectors.• Includes adaptors for Bosch, Delphi, Denso injectors.

$139.95ET2209

• Access difficult pipe connectors and wired sensor units (NOT Lambda).• Ideal for the loosening of ABS pipes, master cylinder pipes, diesel injection pipes and wired sensors.

$189.95ET1472

NEW

$79.95ET1172

NEW$69.95ET1195

NEW

$84.95ET1033

NEW

$239.95ET1383

NEW

$57.95ET1267

NEW

$44.95ET1456

NEW

$44.95ET1457

NEW

$134.95ET1426

NEW

$179.95ET1428

NEW$119.95

ET1392

NEW

NEW

NEW

Page 13: Endeavour Tools Catalogue

Transmission Filling System

EngineTools

Optional Adaptors

Water Pump Wrenches

41mm (GM 1.6L)

46mm (GM 1.6, 1.7D, 2.0L)

GM 46844 Air BagRemoval

Tool

Fuel FeedDisconnect Plier

Seal Installation & Removal Kit

Universal Clutch Alignment Kit (17 Pce)

13Prices Valid: 01/02/12 till 27/04/12

Quickly & easily remove camshaft and crankshaft seals in passenger cars, light trucks and sports utility vehicles.

• Holds water pump when replacing the timing belt.

For replacing transmission �uid onmodern vehicles. Adaptors to suitmost vehicles including Ford Falcon.7.5l capacity. Viscosity range up toSAE 140.

16 SAE & metric pilot bearingadapters for aligning the clutch plate for assembly on most cars.

For Mercedes M12 thread (722.9), VAG M22 thread(CVT), VAG M24 thread (DSG).

$24.95ET1310-17

Honda | Toyota Fuel Pipe LineNut Wrenches

3/8” Drv x 14mm(OL 93mm)

1/2” Drv x 17mm(OL 98mm)

Diesel InjectionPriming Tool

Essential for priming fuelsystem after any service

work that disturbs thefuel system to enablethe engine to restart.

• For inline fuel �lterreplacements

• Petrol engines: VAG,GM, Mercedes M-Class

Piston Rings Compressors

3” Height | 60-175mm

2” Height | 40-80mm

3” Height | 53-125mm

Multi Purpose Puller SetFor balancer, pulley, gear &�ywheel. Drop forged 4-slotyoke and a variety of cap boltsand forcing screw tips makethis set universal.

$24.95ET1310-14

NEW

NEW

$15.95DA3020

$18.95DA3021

$21.95DA3022

$32.95ETWH101A

$47.95ET1546

NEW

$49.95ET5094

NEW

$29.95ET1023A

$29.95ET1023B

$229.95ET0960A

$39.95DA4001

$99.95ET4089A

$289.95ET4089

$54.95DA9132

NEW

NEW

Page 14: Endeavour Tools Catalogue

Timing Tools

Another Quality Range From Endeavour Tools14

Ecotec (Barina)

Mitsubishi Belt Tensioner Adjuster

GM Cruze (2.0 VDCi)

OEM CodeEN-48245EN-48246

Engine codesZ20DM | Z20DMH \ LLWZ20DMH | RA420 | Z20SI | Z20S3 | Z20S4 | Z20S5

Subaru Camshaft Sprocket Holder Adjustable Camshaft Pulley Holding Tool

Applications OEM CodeKM-953 | KM-952KM-954 | KM-955

• Two cylinder design to fix the tension pulley easily. • For Mitsubishi vehicles with injection engines.

• Universal tool set for fitting stretch belts on a variety of modern vehicles. • Guides belts into place while pulleys are rotated.

• Set of pins suitable for locking back belt tension device while installing or removing cam or auxiliary drive belt.

Agila | Astra G/H | Combo CCorse B/C/D | Meriva ATigra B 1.0 / 1.2 / 1.4 petrol engines Codes X10XE | Z10XE | XEP | Z14XEL | XEP (1993 - 2010)Barina XC Z14XEP

V6 Alloy 3.6L Chain Drive

Grooved pins hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. Applications: Benz, BMW, Ford, Mitsubishi, Honda, VW, Audi, Nissan, Volvo & Toyota.

OEM # 499977500 For 2005 & Newer 2.5L Turbo And 3.6L 6 Cylinder Engines

Ribbed Pulley Remover• Puller grips the grooves on the pulley• Suitable for pulley diameters 130 - 155mm

Belt Tension Locking Pins (6 pce)

Zetec 16V Twin Cam 2.0L

OEM Code

PETROL

ET1464BELTDriven

21-210 | 303-50721-163 | 303-57421-259 | 303-74821-162B | 303-376 303-376B

ApplicationsFiesta | Focus | CougarC Max | Maverick | MondeoPuma | S-Max | Transit ( from 1995 onwards)

Also includes some Volvo 1.8 and 2.0 engines

FORD

Astra 1.6 | 1.8OEM Code

PETROL

ET0471VPBELTDriven

KM-6340KM-6333KM-911

ApplicationsAstra G/H | Corsa D | Insignia | Meriva ASignum | Vectra C | Safira B 1.6 / 1.8 petrol engines | Codes 2HO | A18XEW | LDEA16XER | Z16LEL | LER | XE1 | XEP XER | Z18XER (2003 - 2010)

Applications:

GMPETROL

BELTDriven

CHAINDrivenGM

GM | COMMODORE

$109.95 $49.95

$49.95

ET0530

ET46105

ET1314

GM

GM

CHAINDriven

Universal Stretch Fit Tool (2 Pce)

ET0270

Applications:Laguna 2.2D/TD, Safrane 2.2TD,Espace 2.2TD, Trafic 2.5 2.5D, and Megane 2.5D/TD

RENAULT BELTDriven

CHAINDriven $224.95

CITROËN / PEUGEOT $269.95ET1541

PETROL

BELTDriven

DIESEL

DIESEL

An essential kit for servicing petrol / dieselengines including timing belt replacement.

ET0379

Applications:Audi : A4, A6, A8, AII (97-04)VW : Passat (98-04)

AUDI | VW $249.95PETROL

BELTDriven

DIESELCHAINDriven

PETROL

BELTDriven

CHAINDriven

$74.95NEW

Citroën: AX, BX, ZX, XM, VISA, SAXO, XSARA, XANTIA, Berlingo, Jumpy, C15, C25, Picasso, C5. Peugeot: 106, 205, 305, 306, 307, 309, 405, 406, 605, 607, Expert, Partner, Boxer. Including (Petrol) 1.8 2.0 2.2 16v HPI EW coded engines and (Diesel) 1.9 DW8, 2.0 DW10, 2.2 DW12 HDi 1.9 D.

$99.95NEW ET1161

Applications:Hold camshafts at TDC position when replacing timing belt. Applicable: AUDI A4, A6, A8, S4, ALLROAD (95-04). VW: PASSAT (96-04) with codes: ACK, AGA, AGB, AJG, ALF, ALG, ALW, AML, AMM, APR, APS, APZ, AQD, ARE, ARJ, ASM, BDV, BES. P.C.D.: 622mm

AUDI | VW $74.95V6 Camshaft Setting Plate

A comprehensive kit with tools for 1.3 & 1.9 CDTi, Ecotec 2.0 & 2.2 engines, 1.0 12V & 1.2 16V, 1.4 & 1.6 16V Ecotec.This includes Astra and Barinas.

ET1549 $169.95

$19.95ET1232

$39.95ET2172

$78.00ET1400

NEW

$24.95ET1346

$149.95ET1081

$78.00ET8075

NEW

NEW

Page 15: Endeavour Tools Catalogue

Prices Valid: 01/02/12 till 27/04/12 15

Strut Support Clamp

Spotweld Cutter 3/8”

Grip-On Tool Shadow Board (16 Pce)

Tail Pipe Expanders

Vacuum Suction Cup (150mm)

Butt Welding ClampSet (4 Pce)

Filler Application Set (4 Pce) Mini Panel Removal Set (6 Pce)

Internal design operates with simple wrench. Standard equipment for all tail pipe expanding.

• Great for removing small or fine facia trim and bezels from dashboards, air vents door planels, and much more.• Made from impact resistant high quality nylon.

• Pull out panel dents safely & easily. • Also suitable to hold windshields, lift metal / plastic etc. • Simply lift lipped edge to release vacuum.

• Quality alloy steel double ended blade cuts perfect holes in most materials. • 1/4” arbour with retractable pilot assures accurate cuts.

Made from spring steel with plastichandles. 4 piece set of

1”, 2”, 3” & 4”.

Work range: 1-1/8” to 1-3/4” (29-44mm)

Work range: 1-1/2” to 2-1/2” (38-64mm)

Work range: 2-3/8” to 3-1/2” (54-89mm)

131-10-BLOmnium GripSize 300mmCapacity 60mm

131-07-BLOmnium GripSize 200mmCapacity 40mm

111-10-BLCurved JawSize 235mmCapacity 63mm

111-07-BLCurved JawSize 190mmCapacity 42mm

112-10-BLStraight JawSize 235mmCapacity 63mm

112-07-BLStraight JawSize 190mmCapacity 42mm

1010Grip HolderSize 135mmCapacity 60mm

MG2K-040Micro GripSize 92mmCapacity 12mm

1075MultiGrip HolderHolds 5”, 7”, 10”

127-06-BLLong NoseSize 165mmCapacity 55mm

128-08-BLSheet MetalSize 200mmCapacity 45mm

124-06-BLC-ClampSize 165mmCapacity 60mm

125-09-BLU-ClampSize 200mmCapacity 60mm

124-12-BLC-ClampSize 300mmCapacity 100mm

139-10-BLHose ClampSize 235mmCapacity 30mm

111-05-BLCurved JawSize 135mmCapacity 30mm

• Easily aligns panels withdifferent thicknesses – surface to surface – for

smooth / accurate seam welding

Large 50mm diameter circular mirror provides wider view. Powerful magnet lifts 1.6kg. Both tools feature ball joints andtelesopic handles.

Telescopic Mirror & Pick Up Tool (2 pce)

Pack of 100 stainless steel, single edge razor blades. Fits all standard razor blade tools. Plastic storage box included.

Razor Blades (100 Pce)

Fits rubber, plastic & handle clips.

3 in 1 Clip & Trim Remover

Contains brushes with nylon, brass and stainlesssteel bristles. Ideal for cleaning dirt, rust,

peeled paint, including carburetorsor distributors.

3 Pce Cleaning Brush Set

Durable nylon bristles. 3/8” external hose fittingallows liquid to run through handle out the centerof brush head for improved cleaning. Overall length:295mm

Angled Head Parts Cleaning Brush

Durable nylon bristles can be used with general cleaning solvents. An excellent brush for cleaning engines and parts.

Parts Cleaning Brush

$19.95ET0042

NEW

$7.95DA6810

$34.95ET0722

$29.95DA5215

$9.95DA6852

$12.95DA6866

$19.95DA1248

$18.95DA6806

$12.95ET7032

$25.00DA6101

$33.00DA6103

$58.00DA6105

$379.95WH1-SET16-39

$27.95DA0225

$7.95DA1130

$5.95DA1132

Page 16: Endeavour Tools Catalogue

Stores advertised on this page of this catalogue are independent businesses. Every effort is made to ensure advertised stock is available, but due to factors beyond the control of Endeavour Tools Pty Ltd, products advertised in this catalogue may not be available at all stores. Pricing for products includeGST are recommended only. Certain items may incur a freight charge in some stores. Endeavour Tools Pty Ltd reserves the right to correct printing errors and omissions. All sizes shown are approximate only, and accessories shown with the product are not included unless specified. All products in this

catalogue were available the time of preparation and Endeavour Tools will, within reason ensure stock of advertised product is available, but cannot be held responsible for unforseen shortfalls, beyond their control. No back orders for those items marked “While Stocks Last”.

6 Piece Extra LongFlat Ring Wrench Set• “Zero Degree Offset” & polished finish• Chrome-Moly Steel• Sizes: 8x10mm 12x14mm 13x15mm

16x18mm 17x19mm 22x24mm

Adjustable Pry Bar Set (3 Pce)Indexing head adjusts to 14 fixed angles. 3 lengths - 250mm / 300mm / 380mm

Your Endeavour Tools Distributor:

Power Probe III Master KitThe ultimate circuit tester kit! Includes:

• Power Probe III circuit tester• ECT2000 – detects SHORT and OPEN circuits• PPLS01 – deluxe lead set• Features external torch

Sizes: OL:8 x 10mm12 x 14mm13 x 15mm16 x 18mm17 x 19mm

315mm394mm407mm420mm460mm

Flexible & Reversible 5pcs Metric Set

Quality Tools - Designed to Last - Made In Taiwan

• Locking end locks bits / sockets onto driver, so they don’t come off in the engine bay!• 1/4” sockets: 5, 6, 7, 8, 10mm• Bits: PH1, PH2, Slotted - 4, 6.5mm, Torx - T10, T15, T20, T25, T27, T30

Flexible Hose Clip Driver (17 pce)

$379.95ETPP3KITFIRE

$279.00XLF5-MET

$149.95LSBM-6

$99.95ET8009

$44.95ET0170

With �ame patternFor a limited time only

Fuel & Air Conditioning Disconnection Kit (21 pce)

• Comprehensive set for separating automotive air conditioning hoses and fuel lines.• Suits a wide variety of vehicles including Ford and GM.

$127.95ET3002

NEW

NEW

NEW

Coolant Filler Japanese | Korean Vehicles• 1 Bleeder Tube• 3 Adaptors (Female Bayonet Type)- #41 (Red) 42mm - #43 (Blue) 44mm - #50 (Black) 57mm• 1 Adaptor (Female Thread) Internal Diameter: - #3 (Yellow) 48mm

Includes

bleeder tubeIncludes

bleeder tube

$97.95ET1265

NEW