End Frame - Det
9
description
Steel
Transcript of End Frame - Det
END FRAME DETAIL
BEARING END FRAME ROD ATTACHMENT
SHT. NO.
EF01001
RAFTER
CL280
(12" A325 BOLTS)ROD BRACE CONNECTION
WITH HEX NUT AND FLAT
WASHER NOTE: THESE ITEMS
SHIPPED LOOSE.
ROD BRACE
ATTACHES TO ENDWALL
COLUMN USING STANDARD
ROD CONNECTION
CORNER
COLUMN
NOTES: FRAME SHAPES MAY VARY.
SEE ERECTION DRAWING FOR ELEVATIONS AND MARKS.
DATE
MAR. 06 00
REV.
CLEVIS ROD CONNECTION
BEARING END FRAME ROD ATTACHMENT
END FRAME DETAIL
SHT. NO.
EF01003
1
2" A325 BOLTS
RAFTER
ROD BRACE CONNECTION
WITH 34" A325 BOLT
NOTE: THESE ITEMS
SHIPPED LOOSE.
CORNER COLUMN
ANGLE WELDED
TO ROD
GUSSET WELDED TO
INSIDE COLUMN FLANGE
NOTES: FRAME SHAPES MAY VARY.
SEE ERECTION DRAWING FOR ELEVATIONS AND MARKS.
ROD BRACE
ATTACHES TO ENDWALL
COLUMN USING STANDARD
ROD CONNECTION
DATE
FEB. 03 00
REV.
CLEVIS ROD CONNECTION
END FRAME DETAIL
RIGID END FRAME ROD ATTACHMENT
3
4" A325 BOLTS
RAFTER
ROD BRACE CONNECTION WITH
3
4" A325 BOLT
NOTE: THESE ITEMS
SHIPPED LOOSE.
ROD BRACE
ATTACHES TO ENDWALL
COLUMN USING STANDARD
ROD CONNECTION
CORNER COLUMN
ANGLE WELDED
TO ROD
GUSSET WELDED
TO INSIDE
COLUMN FLANGE
NOTES: FRAME SHAPES MAY VARY.
SEE ERECTION DRAWING FOR ELEVATIONS AND MARKS.
SHT. NO.
EF01004
DATE
FEB. 03 00
REV.
ALL GIRT CONNECTIONS USE 1/2" A325 BOLTS
SEE ERECTION DRAWING FOR ELEVATIONS AND MARKS.
NOTES: FRAME SHAPES MAY VARY.
END FRAME DETAIL
CORNER COLUMN GIRT CONNECTIONS
WITH BYPASS GIRTS
SIDEWALL GIRT
CORNER COLUMN
CL202
USED IF ENDWALL GIRT
ALIGNS WITH SIDEWALL GIRT
ENDWALL GIRT
ENDWALL GIRT
CL224 (ORPC32, CL459)
CL207
ANCHOR ROD, NUTAND WASHER
1 1
4" SELF-DRILLERS
SHEETED SIDEWALL AND SHEETED ENDWALL
SHT. NO.
EF02001
DATE
JUL. 06 00
REV.
END FRAME DETAIL
CORNER COLUMN GIRT CONNECTIONS
WITH FLUSH OR INSET GIRTS
CL205
ENDWALL GIRT
PC1
CL205
PC1
ENDWALL GIRT
ANCHOR ROD, NUTAND WASHER
PC32
(OR CL459)
CORNER COLUMN
1 1
4" SELF-DRILLERS
PC30 WITH FLUSH GIRTS/PC29 WITH INSET GIRTS
SIDEWALL GIRT
PC30 WITH FLUSH GIRTS/PC29 WITH INSET GIRTS
SIDEWALL GIRT
NOTES: FRAME SHAPES MAY VARY.
SEE ERECTION DRAWING FOR ELEVATIONS AND MARKS.
ALL GIRT CONNECTIONS USE 1
2" A325 BOLTS.
GIRTS CLEAR COLUMN FLANGE
SHEETED SIDEWALL AND ENDWALL
SHT. NO.
EF02010
DATE
MAR. 06 00
REV.
END FRAME DETAIL
CORNER COLUMN GIRT CONNECTIONS
WITH FLUSH OR INSET GIRTS
ENDWALL GIRT
1 1
4" SELF-DRILLER
PC7
ENDWALL GIRT
PC7
PC30 WITH FLUSH GIRTS/PC29 WITH INSET GIRTS
ANCHOR ROD, NUTAND WASHER
TEK 4 SCREWS
6" O.C.
PC22
CORNER COLUMN
PC22
PC30 WITH FLUSH GIRTS/PC29 WITH INSET GIRTS
SIDEWALL GIRT
CL205
GIRTS DO NOT CLEAR COLUMN FLANGE
SHEETED SIDEWALL AND ENDWALL
NOTES: FRAME SHAPES MAY VARY.
SEE ERECTION DRAWINGS FOR ELEVATIONS AND MARKS.
ALL GIRT CONNECTIONS USE 1
2" A325 BOLTS.
SHT. NO.
EF02012
DATE
FEB. 03 00
REV.
END POST ALIGNS WITH PURLIN CONNECTION
ENDWALL COLUMN OR
COLUMN EXTENSION
1/2" A325 BOLTSAND NUTS WITH FLAT
WASHERS (F844)
3/4" A325 BOLTS WITHNUTS (NO WASHERS)
PURLIN
PC65
NOTE:
PC65 is to be placed
on the up slope sideof of the web.
SHT. NO.
EF09001
DATE
JUL. 06 00
REV.
HOT ROLLED BRIDGE CHANNEL
ENDWALL COLUMN OR
COLUMN EXTENSION
NOTES:
Flat washers (F844) are to be placed over the slots in the purlins at bridge clip and bridge clip at PC64.
PC64
END POST BRIDGE CLIP CONNECTION
1/2" A325 BOLTS ANDNUTS WITH FLAT
WASHERS (F844)
HOT ROLLED
BRIDGE CHANNEL
3/4" A325 BOLTS WITHNUTS (NO WASHERS)
PURLIN
1/2" A325 BOLTS ANDNUTS WITH FLAT
WASHERS (F844)
SHT. NO.
EF09003
DATE
JUL. 06 00
REV.
END POST TO BRIGE CLIP CONNECTION
END POST AT PEAK
1/2" A325 BOLTSAND NUTS WITH FLAT
WASHERS (F844)
PEAK PURLIN
1/2" A325 BOLTSAND NUTS WITH FLAT
WASHERS (F844)
BRIDGE CLIP
(PC66/PC67)
NOTE: A washer is required onthe exterior surface of any outerply having a slot in a bolted
connection. Flat washers (F844)are to be placed over the slotsin the purlins and bridge clip.
ENDWALL COLUMN OR
COLUMN EXTENSION
PC64
3/4" A325 BOLTS WITHNUTS (NO WASHERS)
1/2" A325 BOLTSAND NUTS WITH FLAT
WASHERS (F844)
PEAK PURLIN
SHT. NO.
EF09004
DATE
JUL. 06 00
REV.
