end caps fitting instructions - Coburn Sliding Systems · STRAIGHTAWAY 100 Fitting Instructions for...

1
End Cap 01220 Fig C Track End Stop 01419 / 01719 End Cap 01220 STRAIGHTAWAY 100 Fitting Instructions for Track End Stop and End Caps Track End Stop 01419 / 01719 C 2017 Coburn Sliding Systems Limited C 2017 Coburn Sliding Systems Limited Part No: 06426.36 Max weight: 100Kg, Max height: 2.5m, Thickness: 20-50mm Max weight: 100Kg, Max height:2.5m, Thickness: 20-50mm STRAIGHTAWAY 100 Fitting Instructions for Track End Stop and End Caps Fig A In Fig A blue arrow shows the track stop inserted into the track. Then use spanner to tighten the bolt. Fig B Peel off the tape strips as shown in Fig B and then insert the end cap into the track see Fig C. Part No: 06426.36 Fig A In Fig A blue arrow shows the track stop inserted into the track. Then use spanner to tighten the bolt. Fig B Peel off the tape strips as shown in Fig B and then insert the end cap into the track see Fig C. Fig C

Transcript of end caps fitting instructions - Coburn Sliding Systems · STRAIGHTAWAY 100 Fitting Instructions for...

AVAZ

DETAIL AV SCALE 1 : 2

End Cap 01220

AXAY

DETAIL AX SCALE 1 : 2

Fig C

Track End Stop 01419 / 01719 End Cap 01220

DETAIL AY SCALE 1 : 2

DETAIL AZ SCALE 1 : 2

STRAIGHTAWAY 100 Fitting Instructionsfor Track End Stop and End Caps

Track End Stop 01419 / 01719

C 2017 Coburn Sliding Systems Limited C 2017 Coburn Sliding Systems Limited Part No: 06426.36

Max weight: 100Kg, Max height: 2.5m, Thickness: 20-50mm Max weight: 100Kg, Max height:2.5m, Thickness: 20-50mm

STRAIGHTAWAY 100 Fitting Instructionsfor Track End Stop and End Caps

Fig A

In Fig A blue arrow shows the track stop inserted into the track. Then use spanner to tighten the bolt.

Fig B

Peel off the tape strips as shown in Fig Band then insert the end cap into the tracksee Fig C.

Part No: 06426.36

Fig A

In Fig A blue arrow shows the track stop inserted into the track. Then use spanner to tighten the bolt.

Fig B

Peel off the tape strips as shown in Fig Band then insert the end cap into the tracksee Fig C.

Fig C