EnclosureEnclosure embracing the worldembracing the...
Transcript of EnclosureEnclosure embracing the worldembracing the...
Tel +82-43-877-3611 / Fax +82-43-877-3615
Tel +82-31-499-3611 / Fax +82-31-499-3615
Hwasin Industrial Systems Co., Ltd.
Head Office
Branch
https://www.hsboxglobal.com
Official Homepage
60, Maengdongsandan 1-gil, Maedong-myeon, Eumseong-gun, Chungcheongbuk-do, Korea
65, Mayu-ro 186beon-gil, Siheung-si, Gyeonggi-do, Korea
EnclosureEnclosureembracing the worldembracing the world
2019
01
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Introduction
Headquarters (Eumseong) Branch (Siheung)
We have been dedicated to manufacturing electrical enclosures over the past 30 years in Korea. Our product lineup ranges from steel, stainless steel and plastic enclosures to aluminum enclosures.
Always puts customers first
We always put quality improvement, new product development and cost reduction on our highest priority to satisfy our customers.
Ready to Supply Make-to-order products
We can supply any kinds of enclosures from standard forms of electrical enclosures to special forms of enclosures based on the customer demands.
Cares about the environment
We are committed to developing and manufacturing environment-friendly products under the recognition that the environment protection is corporate social responsibility.
Meets the international standards and quality certifications
We meet the requirements of international standards from IEC and NEMA, and quality management system (KS Q ISO 9001:2015/ISO 9001:2015). In particular, we have been manufacturing products that meet international standards such as UL, TUV and CE.
Technical Data
HWASIN's globally certified products
IP (Ingress Protection) / UL / NEMA / RoHS
Explosion protection types / Polyurethane gasket
Plastic & Aluminum Products
Overview of plastic products
N Series - Small size plastic enclosure
Q Series - European style mid size plastic enclosure
F Series - Mid size plastic enclosures
G Series - Cost effective plastic enclosures
ED-AL Series - Aluminum enclosures
EX-DP Series - Explosion protected aluminum enclosures
Overview of steel & stainless steel products
AC-LP/ACU-LP Series - High-end weather-proof enclosure
EX-UP/UC/SP/SC Series - Explosion protected junction box
ES/EU Series - Cost-effective indoor enclosure
CD/CDU Series - Cost-effective surface mounting enclosure
CS/CU Series - Cost effective outdoor enclosure
OS/OU Series - Outdoor double door enclosure
FB/FS/FU Series - Flush mounted enclosure
HS/HU Series - Watertight & airtight enclosure
IP66 & UL (NEMA 4X) certified products
PS Series - Enhanced weatherproof capability
RT Series - Modular profile structure
SD Series - Modular structure with inner swing door
MS Series - Modular structure | KP Series - Operational enclosure
DS Series - Desk style | TS/TSU Series - Terminal box with hook clamp
Communication Terminal Box Series | OSM/OUM - Outdoor metering box
FM - Flush mounted metering box
PB Series - Pull box | Base, Support | FH Series - Fire hydrant enclosures
Earthing terminal | Post | Cable gland cap
PG Series - Cable glands
Make-to-order products
Steel & Stainless Steel Products
p2
p4
p6
p8
p10
p12
p14
p16
p18
p19
p20
p21
p22
p24
p26
p27
p28
p29
p30
p31
p32
p33
p34
p35
p37
p38
p38
p39
p40
p41
p42
02 03
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
We have obtained TUV IP66 and UL NEMA 4X certifications for electrical enclosures with monitoring windows for the first time as an electrical/control enclosure manufacturers in Korea. The maximum size of the monitoring window is 825 x 2125.
(3) The structure of UL certified products shall be same as the sample products tested and approved by UL and
their sizes shall not exceed the maximum size of the sample products.
The UL certified products shall not have holes and cuttings which do not exist in the drawings approved by UL.
We can make holes and cuttings (e.g. switches, wiring, vent) for the convenience of customers, but we do not hold
any responsibility for the holes and cuttings.
Certification
IP66 (TUV) PS-IP
DescriptionModel Max. Size
W2300 * H2350 * D1000
Material Steel / Stainless
Protection Completely water and dust proof
Feature Box type enclosures,
free standing enclosures (cabinet type)
Structure
Structure
Welded structure with front door /
two doors / front and rear doors
(3) The products above can be manufactured with CE certification.
(4) The structure of CE certified products shall be same as the sample products tested and approved by the notified
body and their sizes shall not exceed the maximum size of the sample products. The CE certified products shall
not have holes and cuttings which do not exist in the approved drawings. We can make holes and cuttings
(e.g. switches, wiring, vent) for the convenience of customers, but we do not hold any responsibility for the holes
and cuttings.
(5) When you need an IP test report done specifically on the unit you purchase, a separate IP testing is required
after manufacturing the unit.
3. Separate IP testing
(1) We have vast experience in passing IP tests so that we are capable of producing enclosures with any IP degrees
that the customer needs. However, the design and structure of the enclosure might need to be changed to pass
the tests.
(2) IP testing requires extra 10 days in addition to the manufacturing time. Therefore, when you need a separate IP
test report, the delivery will be in around three weeks after the order.
(Unit: mm)
2. TUV and CE certified products
(1) TUV is one of the most renowned certification bodies with its global reputation.
(2) Our PS-IP, AC-LP ad RT series are certified by TUV for IP65 and IP66.
IP65 (TUV)
IP55 (TUV)
AC-LP
RT
One doorW1100 * H1600 * D500
Two doorsW1200 * H1200 * D500
Steel min. 1.6mm / Stainless steel min. 1.5mm
Water & dust proof
High-end distribution and control box
Welded structure with front door / two doors
Material
Protection
Feature
Structure
Steel min. 1.6mm / Stainless steel min. 1.5mm
Water & dust proof
Modular structure (removable left, right and rear covers)
Modular structure with front door / front and rear doors
Material
Protection
Feature
The following description applies to the products certified by international standards.
For enclosures without the certifications, we can manufacture enclosures in any forms based on your requirements.
(1) NEMA is standards defined by the National Electrical Manufacturers Association in the US. The association defines the standards for protection degrees of electrical enclosures. UL, one of the most renowned testing and certification bodies in the US, approves electrical enclosure manufacturers with its certifications based on the NEMA standards. Therefore, products with NEMA ratings and UL ratings are basically same even though the markings are different.
Since protection ratings between NEMA and IP are systematically different, it’s not possible to compare the
ratings one by one. The following table is for reference only.
1. UL (NEMA) certified products
(2) NEMA protection ratings
HWASIN’s Globally Certified Products
W1005 * H2205 * D1005
(Unit: mm)
UL50E Type 4, 4X, 12
1, 3, 3R W2300 * H2350 * D1000
Around IP66
ES / EU
CD / CD-U
FB / FU
AC-LP
MS / MS-U
PS-UL
Steel min. 1.6mm / Stainless steel min. 1.5mm
Water & dust proof
High-end distribution and control box
Around IP65
UL50E Type 3R, 12
One doorW1100 * H1600 * D500
Two doorsW1200 * H1200 * D500
Material
Protection
Feature
IP
UL50 Type 1 W800 * H1200 * D300
PB-ULUL50 Type 1 W2616 * H3226 * D2616
UL50 Type 1 W800 * H1200 * D300
Material Steel min. 1.6mm / Stainless steel min. 1.5mm
Protection N/A
Feature Cost effective distribution and control box
IP Around IP30
Material HGI (Hot Galvanized Coil) min. 1.6mm
Protection N/A
Feature Pull Box
IP Around IP30
UL50 Type 3R W1000 * H2200 * D1000
Material Steel min. 2.3mm / Stainless steel min. 2.0mm
Protection Waterproof against raindrops (outdoor use)
Feature Free standing enclosure (cabinet style)
Removable left, right and back covers
IP Around IP32
HS / HU W1000 * H1800 * D1000
Material Steel min. 2.3mm / Stainless steel min. 2.0mm
Protection Completely water and dust proof
Feature Clamp locking (airtight enclosure)
IP Around IP66
Material Steel min. 2.3mm / Stainless steel min. 2.0mm
Protection Water & dust proof
Feature Free standing enclosure (cabinet style)
IP
UL50 Type 1 W800 * H1200 * D300
UL50 Type 4, 4X, 12
Certification DescriptionModel Max. Size
Same spec. as ES/EU(except for surface mount door)
Same spec. as ES/EU(except for flush mount box + cover)
04 05
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Box Ingress Protection Grade: IEC60529The International Electrotechnical Commission (IEC) defines the protection ratings of electrical
equipment or enclosure as shown in the following table:
First digit
Solid particle protection Liquid ingress protection Protection againstmechanical impact
1
2
3
4
5
6
0
1
2
3
4
5
6
7
8
0
01
05
06
07
08
09
10
00
Second digit IK code
Ingress of solid object diameter 50mm is protected
No Protection No Protection No Protection
Ingress of solid object diameter 12.5mm is protected
Ingress of solid object diameter 2.5mm is protected
Ingress of solid object diameter 1.0mm is protected
Protected against dust
Totally protectedagainst dust
Protected against vertical water drip
Impact < 1 Joule
20Cm
500g
500g
40Cm
1.7Kg
29.5Cm
5Kg
20Cm
5Kg
40Cm
Protected against waterdrip from vertical directionwhen the enclosure is tilited at 15°
Protected against waterspray from all directions
Protected against water splash from all directions
Protected against strong water jets from all directions
Protected against immersion between 15cm and 1m
Protected against long periods of immersionunder pressure
IP Description IP Description IK Description
~Ingress Protection
Protection against solid particles
Protection against liquids
IP ratings (Ingress Protection)
6 6IP
Protected against waterspray at any angle up to 60° from the vertical direction
Protected against drop of 500g object from 20cm height
Impact 1 joules
Protected against drop of 500g object from 40cm height
Impact 2 joules
Protected against drop of 1,700g object from 29.5cm height
Impact 5 joules
Protected against drop of 5,000g object from 20cm height
Impact 10 joules
Protected against drop of 5,000g object from 40cm height
Impact 20 joules
Type 1
Type 3
Type 3R
IP20
IP55
IP24
IP54
NEMA IP
Type 4, 4X
Type 12
IP66
UL (Underwriters Laboratories)
UL is a global safety consulting and certification company approved to perform safety testing by the U.S. federal
agency Occupational Safety and Health Administration. It defines product safety standards, sets the evaluation
methods and performs evaluation tests. It follows safety regulations of NEMA for electrical enclosure safety regulations.
HWASIN is one of the few electrical enclosure manufacturers in Korea with a wide range of UL certified products.
NEMA (National Electrical Manufacturers Association)
NEMA is a manufacturers association in the U.S. defining standards for electrical equipment. NEMA defines the standards for the following items as a guideline for testing of electrical enclosures.
Type Description Type Description
Intended for indoor use and protected against ingress of solid foreign objects (falling dirt)
Intended for indoor use and protected against ingress of solid foreign objects (falling dirt) and ingress of water (dripping and light splashing)
Intended for indoor or outdoor use, protected against ingress of solid foreign objects (windblown dust), ingress of water (rain, sleet, snow) and undamaged by the external formation of ice
Intended for indoor or outdoor use, protected against ingress of solid foreign objects (falling dirt), ingress of water (rain, sleet, snow) and undamaged by external formation of ice
Intended for indoor or outdoor use, protected against ingress of solid foreign objects (windblown dust), ingress of water (rain, sleet, snow) and operable when ice laden
Intended for indoor or outdoor use, protected against ingress of solid foreign objects (windblown dust), ingress of water (splashing water, hose directed water) and undamaged by the external formation of ice
Intended for indoor or outdoor use, protected against ingress of solid foreign objects (windblown dust), ingress of water (splashing water, hose directed water), corrosion and undamaged by the external formation of ice
Intended for indoor or outdoor use, protected against ingress of solid foreign objects (falling dirt), ingress of water (hose directed water and the entry of water during occasional temporary submersion)and undamaged by the external formation of ice
Intended for indoor or outdoor use, protected against ingress of solid foreign objects (falling dirt), ingress of water (hose directed water and the entry of water during occasional temporary submersion), corrosionand undamaged by the external formation of ice
Intended for indoor use, protected against ingress of solid foreign objects (falling dirt, circulatingdirt), and ingress of water (dripping and light splashing)
Intended for indoor use, protected against ingress of solid foreign objects (falling dirt, circulating dirt), ingress of water (dripping and light splashing) and the spraying, splashing and seepage of oil and non-corrosive coolants
1
2
3
3R
3S
4
4X
6
6P
12
13
ROHS (The Restriction of the use of certain Hazardous Subtances)
RoHS directive prohibits or restricts the use of six hazardous substances on electrical and electronic
equipment.
EU RoHS directive has been enforced by the European Union in order to prohibit or restrict the use of six hazardous substances
(lead, cadmium, mercury, hexavalent chromium, PBB and PDBE). The directive has been effective since July 1 2006 and
manufacturers shall prove that their products comply with the directive.
Example application of the substances
Substance Description
Lead
Mercury
Cadmium
Hexavalent chromium
PBB
PBDE
Used in electrical and electronic industry such as solder, lead-acid batteries and electronic components.
Used in production of electrical and electronic appliances and is concentrated in batteries, switches and thermostats.
Used in electronic equipment, car batteries and pigments
Used in chromate pigments in dyes, paints, inks and plastics
Used as flame retardants and added to plastics such as home electrical appliances, textiles,plastic foams, and laptop cabinets
Used in building materials, electronics, furnishings, motor vehicles, airplanes, plastics, polyurethane foams, and textiles
Products that meet RoHS compliance are available on request
IEC and NEMA defines protecting ratings based on different criteria. The following table is only for reference.
06 07
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Ex marking
Ex e ll C T6 IP66Explosion protecion Protection type Equipment group Gas-group Temperature class IP rating
Explosion protection type
PressurizationIEC 60079-2
Increased safetyIEC 60079-7
Intrinsically safeIEC 60079-11
Non-sparkingIEC 60079-15
Oil immersionIEC 60079-6
EncapsulationIEC 60079-18
Powder fillingIEC 60079-5
Ex pxEx pyEx pz
Ex e
Ex iaEx ibEx ic
Ex nAEx nCEx nR
Ex o
Ex maEx mbEx mc
Ex q
Zone 1Zone 1Zone 2
Zone 1
Zone 1
Zone 0Zone 1Zone 2
Zone 1
Zone 0Zone 1Zone 2
Zone 2Zone 2Zone 2
T1
≤ 450℃
T2
≤ 300℃
T3
≤ 200℃
T4
≤ 135℃
T5
≤ 100℃
T6
≤ 85℃
Temperature classification
Presence of explosive atmosphere
Gas groups
Group Ⅰ Group Ⅱ Group Ⅲ
Methane
Mines susceptible to firedamp Explosive gas atmosphere Explosive dust atmosphere
Ⅱ A
Ⅱ B
Ⅲ A
Ⅲ B
Propane
Ethylene
Hydrogen
Acetylene
Combustible flyings
Non-conductive combustible dust
Zone 0
Zone 20
Zone 1
Zone 21
Short period / Rarely
Ⅰ : MinesⅡ : Surface industry
Equipment group
SymbolType of protection
IEC standardDescriptionApplicationsZone
FlameproofIEC 60079-1 Ex d Zone 1
Long period / Frequently Occasionally
Zone 2
Zone 22
Ⅱ C Ⅲ C
Switchgear, control station, motor, transformer, heater, lighting
Switchgear, control cabinet, analyzer, large motor
Junction box, control station, motor, lighting
Meter, field bus, sensor, actuator
Zone 2 electrical equipmentnA=Non-sparking apparatusnC=Fittings and componentsnR=Restricted breathing
Transformer, start rheostat
Electrical equipment of limitedpower, controller, signal device, display device, sensor
Sensor, display device, electronic bracelet, transmitter
An enclosure can withstand an internal explosion occurred by an explosive atmostphere that penetrates the enclosure and prevent the transmission of the explosion to the surroundings.
The penetration of the surrounding atmosphere into the enclosure is prevented by keeping a protective gas inside it at a pressure above the atmospheric pressure.
This method increases the level of safety, thus preventing the possibility of excessive temperatures and the occurance of sparks or electric arcs within the enclosure, where such ignition sources would not occur in normal service.
This type is applied to electrical apparatus such that in normal operation it is not capable of igniting a surrounding atmosphereand a fault capable of causing ignition is not likely to occur.
An electrical circuit is intrinsically safe if sparks or thermal effectsproduced under specified test conditions are not capable of causingignition of a given explosive atmosphere.
Parts of electrical apparatus are immersed in oil or a protective fluids so that a potentially explosive atmosphere outside of the apparatus cannot be ignited.
Parts of electrical apparatus are encapsulated in a compound so that it cannot ignite a potentially explosive atmosphere.
A potentially explosive atmosphere cannot be ignited by filling the enclosure with powder.
Temp. class
Max. surface temp.(℃)
Gas
Dust
Conductive combustible dust
Gasket foaming for water & dust-proof
Electrical enclosures require a high degree of water and dustproof capability for the protection of internal electrical equipment depending on the environment. Our polyurethane gasket has high resilience and flexibility even after a long period time, thus providing excellent sealing capacity.
We have been using UL certified material (Germany’s RAMPF) for gasket sealing to maintain the high performance of gasket.
Applications and characteristics of gasket material
Polyurethane
Steel, stainless steel, aluminum, plastic
Material
Contact duration 10 to 15 mins
Density 0.3g/cc
Complete formation 24 hrs
Hardness 35 to 45 Shore 00
95% or higherRestoration rate
Applicable material
Protection ratings NEMA 4, 4X, 6, 6P, 12, 13
Maximum size for gasket work
Max. Size of target workpieceHeight of gasket Width of gasket
Max. Min. Max. Min.Height to Width Ratio
Flat
Groove
1200 x 2400 10 3 20 6 1 : 2
According to the dimensions of the groove of the workpiece
* Polyurethane gasket foaming can be applied to flat surface and groove in any shape.* We can work on special dimensions and you can outsource gasket work to us.
Complete prevention of water and dust ingress is guaranteed!
08 09
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Overview of plastic enclosures
Plastic electrical enclosures have several advantages compared to steel electrical enclosures in terms of weight and stability. Our plastic enclosures are made from pure material, not recycled material, thus providing high strength and durability.
Flammability classifications
Test procedure
Plastics have tendency to burn since they are made from oil. Flammability classification classifies how plastics are likely to burn based on how long it takes for burning to stop.The test is generally conducted and certification is given by UL (Underwriters Laboratory).
Tests are conducted on bar and plaque specimens according to UL94 standards, and there are six classifications: HB, V-2, V-1, V-0, 5VB, 5VA.
Flame-retardant is different from heat resistance, so being higher flame-retardant does not necessarilymean higher heat resistance.
For V-1 and V-0, the specimens may not drip flaming particles that ignite the dry absorbent cotton 300 mm below the test specimen.
The classification on the rightmost is the most flame-retardant.
The weight of a plastic enclosure is 75 percent lighter than
a steel enclosure, ensuring easier transit.
It has a high corrosion resistance with a life-long use and
provides complete insulation.
Polyurethane gasket prevents water and dust ingress into the enclosure.
The cover has bosses onto which inner plate can be mounted so that
you can use our plastic enclosure for a wider range of applications.
Plastic enclosures allow users to make holes with simple tools, thus
improving the work efficiency.
Strong engineering plastic materials (e.g. ABS, PC) are used for plastic
enclosures, providing strength and high durability.
Lightweight
Reliability
Water & Dust proof
Inner plate for cover
Easy drilling
Strength
HB < V-2 < V-1 < V-0
Plastic Enclosures
Spec. of plastic enclosures
Our plastic enclosures are intended for indoor use.
When used outdoors, there are chances that the enclosures may be deformed by the direct sunlight.
The plastic enclosures for outdoor use can be manufactured by a special order.
Material Body - ABS / Cover - ABS, PC(Polycarbonate)
Hook & Hinge - Stainless steel
* Cover material: Opaque - ABS, Transparent - PC
* European style gray transparent
IP rating IP66 / IP65
Color Body - Gray / Cover - Gray, Transparent
Certifications UL50 Type 2 / TUV IP66 / TUV IP65(N Series, F Series) / (N Series, F Series, Q Series) / (G Series)
N Series F Series
Q Series G Series
10 11
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Terminal Box N Series
■ means there is no guide rail. ■ means the width and height are interchangeabld.
Model
Drawings & dimensions (Unit: mm)
mounting holes
Cover - top view Cover - side view Body - top view Body - side view Inner mounting plate
Enclosure dimensions
Width(W) Height(H)Depth(D)
Total Cover Body
The material of a mounting plate is HGI.Mounting bolts are x-shaped round head with tapping screw.
Specifications and dimensions may be changed without a prior notice for the improvement of performance.
Hinge, Opaque cover
Hinge, Transparent cover
Screw, Opaque cover
Screw, Transparent cover
Mounting plate dimensions
Steel Plastic Bolts
0811 07
0815 07
80
80
80
80
110
125
130
150
150
150
150
200
200
110
150
200
250
110
125
180
200
200
250
250
200
200
70
70
70
70
75
75
100
100
130
100
130
100
130
22
22
22
22
22
17
22
22
22
22
22
22
22
35
35
35
35
40
45
65
65
95
65
95
65
95
2020 10
2020 13
1318 10
1520 10
1520 13
1525 10
1525 13
1111 07
1212 07
0820 07
0825 07
65 * 99 * 1.6t
65 * 139 * 1.6t
65 * 184 * 1.6t
65 * 234 * 1.6t
94 * 94 * 1.6t
108 * 108 * 1.6t
112 * 160 * 1.6t
113 * 184 * 1.6t
133 * 184 * 1.6t
133 * 234 * 1.6t
133 * 234 * 1.6t
183 * 184 * 1.6t
183 * 184 * 1.6t
-
-
-
-
-
-
-
137 * 185 * 4t
137 * 185 * 4t
133 * 233 * 4t
133 * 233 * 4t
183 * 184 * 4t
183 * 184 * 4t
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
2-M4 * 8
Some products might not have the features above.
Polyurethane gasket with
high resilience guarantees
the prevention of water
and dust ingress.
Screws are easy to hold to
make fastening of a cover
easier and can be fixed
onto the cover to reduce
the chances of losing the
screws.
Bolts for mounting plate
Mounting plate, cover mounting plate, wall mounting brackets
Assembly diagram
Cover capR.M.P screw
R.M.P support bracketHinge Boss
Body
Cover
Cover screw
Rail mounting plate
Base mounting plate
B.M.P screw
Bracket guide rail
PCB guide
Latch
Components and features
Basic components
Optionalcomponents
Gasket foam Mounting plate PCB guide Latch & hinge Cover screws
Mounting plates can be
installed onto the cover
and in the middle of the
body with support brackets.
PCB can be installed
directly onto the enclosure
with PCB guides.
Stainless steel latches and
hinges are anti-corrosive
and strong enough to
withstand frequent opening
and closing.
Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.
EN-AGH
EN-ATH
EN-AGS
EN-ATS
12 13
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Europe Style Q Series
Cover - top view Cover - side view Body - top view Body - side view Inner mounting plate
Drawings & dimensions (Unit: mm)
Model
Enclosure dimensions
Width(W) Height(H)Depth(D)
Total Cover Body
Hinge, Opaque cover
Hinge, Transparent cover
Screw, Opaque cover
Screw, Transparent cover
Mounting plate dimensions
Steel Plastic Bolts
* The material of a mounting plate is HGI. * Mounting bolts are x-shaped round head with tapping screw.
* Specifications and dimensions may be changed without a prior notice for the improvement of performance.
1919 13
1928 13
1928 18
1938 13
1938 18
2828 13
2838 13
2838 18
2856 13
3856 18
190
190
190
190
190
280
280
280
280
380
190
280
280
380
380
280
380
380
560
560
130
130
180
130
180
130
130
180
130
180
27
27
27
27
27
27
27
27
27
27
90
90
140
90
140
90
90
140
90
140
161 * 161 * 1.6t
161 * 250 * 1.6t
161 * 250 * 1.6t
161 * 350 * 1.6t
161 * 350 * 1.6t
250 * 250 * 1.6t
250 * 351 * 1.6t
250 * 351 * 1.6t
250 * 531 * 1.6t
350 * 531 * 1.6t
170 * 161 * 4t
165 * 256 * 4t
165 * 256 * 4t
170 * 161 * 2ea
170 * 161 * 2ea
260 * 260 * 4t
260 * 360 * 4t
260 * 360 * 4t
-
-
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
8-M5*10L
8-M5*10L
EQ-AGH
EQ-ATH
EQ-AGS
EQ-ATS
Assembly diagram
Cover cap
R.M.P screwCover mounting plate
Hinge Boss
Body
Cover
Cover cap
Base mounting plateB.M.P screw
Latch
Wall mounting bracket
Bolts for mounting plate
Mounting plate, cover mounting plate, wall mounting brackets
Components and features
Basic components
Optionalcomponents
Polyurethane gasket with
high resilience guarantees
the prevention of water
and dust ingress.
Screws are easy to hold to
make fastening of a cover
easier and can be fixed
onto the cover to reduce
the chances of losing the
screws.
Gasket foam Mounting plate PCB guide Latch & hinge Cover screws
Mounting plates can be
installed onto the cover
and in the middle of the
body with support brackets.
The corners of the enclosure
are round-shaped and
protruded, thus providing
the excellent exterior and
higher strength.
Stainless steel latches and
hinges are anti-corrosive
and strong enough to
withstand frequent opening
and closing.
Some products might not have the features above.
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
14 15
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Drawings & dimensions (Unit: mm)
Cover - top view Cover - side view Body - top view Body - side view Inner mounting plate
Model
Enclosure dimensions
Width(W) Height(H)Depth(D)
Total Cover Body
Hinge, Opaque cover
Hinge, Transparent cover
Mounting plate dimensions
Steel Plastic Bolts
* The material of a mounting plate is HGI. * Mounting bolts are x-shaped round head with tapping screw.
* Specifications and dimensions may be changed without a prior notice for the improvement of performance.
■ means that middle mounting plate cannot be installed on the products.
Control Box F Series
2030 15
2535 16
3030 18
3040 18
3545 20
4050 20
4060 23
5060 18/25
5070 18/25
6080 18/28
200
250
300
300
350
400
400
530
530
630
300
350
300
400
450
500
600
630
730
830
150
160
180
180
200
200
230
185/255
185/255
185/285
27
27
27
27
27
27
47
35
35
35
110
120
140
140
160
160
170
150/220
150/220
150/250
165 * 273 * 1.6t
215 * 323 * 1.6t
266 * 276 * 1.6t
265 * 373 * 1.6t
315 * 423 * 1.6t
365 * 473 * 1.6t
365 * 573 * 1.6t
450 * 552 * 1.6t
450 * 652 * 1.6t
550 * 752 * 1.6t
165 * 256 * 4t
219 * 319 * 4t
260 * 260 * 4t
265 * 375 * 4t
319 * 219 * 2ea
374 * 474 * 4t
-
-
-
-
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
6-M5 * 10L
6-M5 * 10L
6-M5 * 10L
EF-AGH
EF-ATH
Rail mounting plateCover mounting plate
Hinge pin & cap
Boss
Body
Cover
Cover screw
Knob for inner door
Inner mounting plate
Latch
Wall mounting bracket
BMP screw
R.M.P bracket set
Assembly diagram
Bolts for mounting plate
Mounting plate, wall mounting brackets, latch, new middle B.M.P. (bolt type, magnetic type), old middle B.M.P. and brackets
Components and features
Basic components
Optionalcomponents
Polyurethane gasket with
high resilience guarantees
the prevention of water
and dust ingress.
Built-in hinges allow you
to assemble the enclosure
with a great ease and
attach and detach
the cover.
Gasket foam Inner door Latch Hinge
You can choose either
bolt type or magnetic type
inner door.
With the inner door
brackets, you can utilize
a middle base mounting
plate as an inner door.
Stainless steel latches and
hinges are anti-corrosive
and strong enough to
withstand frequent opening
and closing.
Some products might not have the features above.
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
Nut incert
16 17
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Power Box G Series
Cover - top view Cover - side view Body - top view Body - side view Inner mounting plate
Model
Enclosure dimensions
Width(W) Height(H)Depth(D)
Total Cover Body
Hinge, Opaque cover
Mounting plate dimensions
Steel Plastic Bolts
Drawings & dimensions (Unit: mm)
Mounting plate is plastic except for 5060, 5070 and 6080(HGI).Mounting bolts are x-shaped round head with tapping screw.
Specifications and dimensions may be changed without a prior notice for the improvement of performance.
EG-AGH
1515 09
1520 10
2030 13
3030 16
3040 16
4050 16
4050 18
5060 20
5070 21
6080 26
150
150
200
300
300
400
400
500
500
600
150
200
300
300
400
500
500
600
700
800
90
100
130
160
160
160
180
200
210
260
22
22
22
22
22
22
22
37
42
52
55
65
90
120
120
120
140
150
155
205
128 * 128 * 1.6t
133 * 184 * 1.6t
165 * 273 * 1.6t
266 * 276 * 1.6t
265 * 373 * 1.6t
365 * 473 * 1.6t
365 * 473 * 1.6t
470 * 570 * 1.6t
470 * 670 * 1.6t
570 * 770 * 1.6t
128 * 128 * 4t
137 * 185 * 4t
165 * 256 * 4t
260 * 260 * 4t
260 * 360 * 4t
374 * 474 * 4t
374 * 474 * 4t
-
-
-
2-M5*10L
2-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
4-M5*10L
* Components and design might be different from the assembly diagram above.
(Models with the size of 5060 or larger do not have the lock brackets)
Assembly diagram
Cover
Latch
Base mounting plate
B.M.P. screw
Hinge
Boss
Body
Lock bracket
Some products might not have the features above.
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
Plastic mounting plate (1515 ~ 4050), Steel mounting plate (5060 ~ 6080)
Steel mounting plate (1520 ~ 4050), Wall mounting brackets
Components and features
Basic components
Optionalcomponents
Silicone gasket Hook Hinge Plastic B.M.P.
Silicone gasket with high durability
guarantees the prevention of
water and dust ingress.
The latch is designed to fasten the
cover with a great ease and
the lock ring provides
a higher security.
The built-in hinge allows users to
easily attach and detach the
cover, thus providing a great
convenience to users for making
holes on the cover.
Plastic base mounting plate with
grids allows users to easily install
electrical equipment.
18 19
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
reIP66 Test Passed
Aluminum Box ED Series
80
80
126
156
163
163
234
234
130
180
206
206
163
263
284
334
60
60
80
100
93
93
112
122
0813 06
0818 06
1220 08
1520 10
1616 09
1626 09
2328 11
2333 12
ED-AL
Width(W) Height(H) Depth(D)Inner Depth
Enclosure Dimensions B.M.P. & Boss
11
11
15
16
17
17
17
17
37
37
49
68
60
60
79
89
Cover Body
ModelSteel B.M.P. Bolts for B.M.P. Boss Height
69 * 114 * 1.6T
69 * 169 * 1.6T
113 * 193 * 1.6T
143 * 193 * 1.6T
145 * 145 * 1.6T
145 * 245 * 1.6T
213 * 263 * 1.6T
213 * 313 * 1.6T
4-M4 * 6L
4-M4 * 6L
4-M6 * 8L
4-M6 * 8L
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
5.5
5.5
9.5
9.5
8.5
8.5
8.5
8.5
Bolts for mounting plate, earhing bolt, bolts for cover
Base mounting plate, wall mounting brackets
Basic components
(Thickness: 3mm, Unit: mm)
Cover
Cover Screw
B.M.P. Screw
Boss
Body
Base Mounting Plate
Earthing Boss
Optional
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
EX-DP
80
80
126
156
163
163
234
234
130
180
206
206
163
263
284
334
60
60
80
100
93
93
112
122
0813 06
0818 06
1220 08
1520 10
1616 09
1626 09
2328 11
2333 12
Width(W) Height(H) Depth(D)Inner Depth
Cover Body
B.M.P. & Boss
Steel B.M.P. Bolts for B.M.P.Boss
Height
Model
Enclosure Dimensions
11
11
15
16
17
17
17
17
37
37
49
68
60
60
79
89
69 * 114 * 1.6T
69 * 169 * 1.6T
113 * 193 * 1.6T
143 * 193 * 1.6T
145 * 145 * 1.6T
145 * 245 * 1.6T
213 * 263 * 1.6T
213 * 313 * 1.6T
4-M4 * 6L
4-M4 * 6L
4-M6 * 8L
4-M6 * 8L
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
4-M5 * 8L
5.5
5.5
9.5
9.5
8.5
8.5
8.5
8.5
(Unit: mm)
B.M.P., bolts for B.M.P., earthing bolt, bolts for cover, bolts for external earthing
Wall mounting brackets, terminal blocks, cable glands
Approval for empty enclosure
IECEx Marking
ATEX Marking
KCs Marking
Approval for junction box
Explosion Protected Aluminum BoxEX-DP Series
Basic components
Optional
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
Detailed specifications are provided separately.Please refer to the Ex catalogue.
2198
NEPSI marking
Ex e ⅡC T6/T5 GbEx tb ⅢC T85℃/T100℃ Db IP66Ex ia ⅡC T6/T5 GaEx ib ⅡC T6/T5 Gb
Ex e ⅡC T6/T5 GbEx tb ⅢC T85℃/T100℃ Db IP66Ex ia ⅡC T6/T5 GaEx ib ⅡC T6/T5 Gb
Ⅱ 1/2 G Ex e ⅡC T6...T5 Gb, Ex ia/ib ⅡC T6...T5 Ga/Gb
Ⅱ 2 D Ex tb ⅢC T85℃, T100℃, Db IP66
Ex e ⅡC T6/T5
Ex tb ⅢC T100℃/T135℃
Ex e ⅡC Gb
Ex tb ⅢC Db IP66
Ⅱ 2 GD
Ex e ⅡC Gb
Ex tb ⅢC Db IP66
Ex e ⅡC
Ex tb ⅢC
20 21
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
reSteel Enclosures
guarantees the complete prevention of water and dust ingress.(TUV IP66 Certified)
HSBOX
Polyurethane Gasket
HSBOX provides explosion protected enclosures with IECEx, ATEX andKCs, globally certified enclosures (UL, TUV,CE), and enclosureswith EMI capability.
With the water-proof frames invented from our experience and
know-how, the gasket guarantees the highest water and dust proof
performance for enclosures requiring a high degree of IP.
Our steel enclosures are made of pickled oiled steel sheets and cold
rolled steel, ensuring higher corrosion resistance and durability compared
to hot rolled steel. We also have large scale powder coating facilities
providing high painting quality, which guarantees longer lifespan of
steel enclosures.* Smooth powder coating (top)
* Embossing powder coating (bottom)
Do you need earthquake-resistant enclosures? We have extensive experience in manufacturing earthquake-resistant enclosures.
Dimensions
We can custom-build enclosures in any size other than the standard sizes.
Specifications and dimensions may be changed without a prior notice for the improvement of performance.
Steel 1.6mm (AC-LP), Stainless steel 1.5mm (ACU-LP)
RAL7035 (Leather-tone, powder coating)
Custom color upon request
Base mounting plate, waterproof key handle
NEMA 3R, 12 (UL), IP65(TUV), CE Certified
Available as ready-made standard products
Intended for indoor and outdoor use
Base mounting plate installable inside of door
B.M.P. for door, monitoring window
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
AC-LP
3030 20
3040 20
4030 20
4050 20
4060 25
6040 25
5060 25
5070 25
6070 25
6080 25
7080 30
8010 30
8012 30
300
300
400
400
400
600
500
500
600
600
700
800
800
300
400
300
500
600
400
600
700
700
800
800
1000
1200
200
200
200
200
250
250
250
250
250
250
300
300
300
240
240
340
340
340
540
440
450
550
550
650
750
750
260
360
260
460
560
360
560
660
660
760
760
960
1160
1
1
1
1
1
1
1
2
2
2
2
2
2
216
216
316
316
316
516
416
416
516
516
616
716
716
240
340
240
440
540
340
540
640
640
740
740
940
1140
(Thickness- enclosure: 1.6mm, BMP: HGI 1.6mm) (Unit: mm)
Earthing bolt (internal)
W D MWHW
HH
MH
BOTTOM VIEW
W
W
FRONT VIEW (2 Door) FRONT VIEW (1 Door) SIDE VIEW MOUNTING PLATE
Components
Width(W) Height(H) Depth(D)Model
B.M.P. DimensionsEnclosure Dimensions
MW MH HW HH Key handle
High-end Weatherproof BoxAC-LP / ACU-LP Series
Feature
Material
Color
Options
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
22 23
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
(EX-UP / EX-UC Stainless Steel, EX-SP / EX-SC Steel)
Feature
Material
Components
Certification
Explosion protected
Steel 2.3 mm (SPHC-PO) (B.M.P. 2.3 mm,
wall mounting bracket 3.2mm or thicker)
Stainless steel 1.5mm (B.M.P. 1.5mm 2.0mm,
wall mounting bracket 3.0mm or thicker)
External earthing bolt, B.M.P., cable gland plate
Options Document box
Gasket PUR: EX-UP, EX-SP
Silicone: EX-UC, EX-SC
ATEX, IECEx, KCs, NEPSI, CE
When electrical equipment other than terminal blocks provided us are used in our explosion protected enclosure, we don’t hold any responsibilities for that. In particular, when electrical equipment is installed on the Empty Enclosure, the enclosure with the electrical equipment shall be certified separately since the Empty Enclosure is a component.
Explosion Protected Junction BoxEX-UP / EX-UC Series
2198
Drawings & Dimensions
EX-UP
EX-UC
EX-SP
EX-SC
150
150
150
150
200
200
200
200
300
300
300
300
300
300
400
400
400
400
500
500
500
500
700
700
150
150
230
230
200
200
300
300
200
200
300
300
400
400
300
300
500
500
400
400
700
700
500
500
100
120
100
150
120
150
150
200
150
200
150
200
150
200
150
200
150
200
150
200
150
200
150
200
1515 10
1515 12
1523 10
1523 15
2020 12
2020 15
2030 15
2030 20
3020 15
3020 20
3030 15
3030 20
3040 15
3040 20
4030 15
4030 20
4050 15
4050 20
5040 15
5040 20
5070 15
5070 20
7050 15
7050 20
Width(W) Height(H) Depth(D)
B.M.P. DimensionsModel
Enclosure Dimensions
MW MH HW HH1 HH2
105
105
105
105
155
155
120
120
220
220
220
220
220
220
320
320
320
320
420
420
420
420
620
620
105
105
185
185
155
155
220
220
120
120
220
220
320
320
220
220
420
420
320
320
620
620
420
420
85
85
85
85
135
135
100
100
200
200
200
200
200
200
300
300
300
300
400
400
400
400
600
600
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
300
300
-
-
HH
85
85
165
165
135
135
200
200
100
100
200
200
300
300
200
200
400
400
300
300
600
600
400
400
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
300
300
-
-
MH1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
300
300
MH2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
300
300
Detailed specifications are provided separately. Please refer to our explosion protected product catalogue.
BASE MOUNTING PLATESIDE VIEWFRONT VIEW
W
H
D
HW1
HW
HW2
MW
HH
2H
H1
HH
MH
Ground Connection
M6
UC (Stainless steel, Silicone)
UP (Stainless steel, PUR)
SC (Steel, Silicone)
SP (Steel, PUR)
Model
EX - XX - 203015 - X - X
SizeModel
H (Hinge)
S (Screw)
A~J (Order No.)
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
Approval for empty enclosure
IECEx Marking
ATEX Marking
KCs Marking
Approval for junction box
NEPSI marking
Ex e ⅡC T6/T5 Gb
Ex tb ⅢC T85℃/T100℃ Db IP66
Ex ia ⅡC T6/T5 Ga
Ex ib ⅡC T6/T5 Gb
Ex e ⅡC T6/T5 Gb
Ex tb ⅢC T85℃/T100℃ Db IP66
Ex ia ⅡC T6/T5 Ga
Ex ib ⅡC T6/T5 Gb
Ⅱ 1/2 G Ex e ⅡC T6...T5 Gb, Ex ia/ib ⅡC T6...T5 Ga/Gb
Ⅱ 2 D Ex tb ⅢC T85℃, T100℃, Db IP66
Ex e ⅡC T6/T5
Ex tb ⅢC T100℃/T135℃
Ex e ⅡC Gb
Ex tb ⅢC Db IP66
Ⅱ 2 GD
Ex e ⅡC Gb
Ex tb ⅢC Db IP66
Ex e ⅡC
Ex tb ⅢC
24 25
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
ES-P / ES-PD
ES-P / ES-PD
ES-P / ES-PD
ES-P / ES-PD
ES-P / ES-PD
ES-P / ES-PD
2030
2535
3040
3545
4050
4060
A transparent door is attached to a
customized ES Series enclosure for
outdoor use (control units installable)
Available as UL certified products
(UL50 Type 1 Enclosure; additional discussion needed)
Products can be customized in any form and any size upon request.
(ES Steel, EU Stainless Steel)
ModelDimensions
A transparent door is attached to a standard
AC-LP Series enclosure (outdoor use)
A transparent door is attached to
a standard ES Series enclosure
(indoor use)
A transparent door is attached to a sta
AC-P Standard Dimensions
ES-P / ES-PD Standard Dimensions
Basic: 5Y7/1 (Smooth powder coating)
Custom: RAL7032 (Leathertone powder coating)
Other colors upon request
B.M.P., Handle
Feature
ES: Steel, EU: Stainless steel
Cost Effective Distribution Box ES/EU Series
Highly cost effective, Available in stock
Material
Color
Components
Double Door Enclosure with a Plastic CoverES-P/ES-PD/AC-P Series
Width (W) Height (H) AC-P
AC-P
AC-P
AC-P
AC-P
AC-P
AC-P
2030
2535
3030
3040
3545
4050
4060
ModelDimensions
Width (W) Height (H)
200
250
300
300
350
400
400
300
350
300
400
450
500
600
200
250
300
350
400
400
300
350
400
450
500
600
ModelEnclosure Dimensions Mounting Plate Dimensions
Width(W) Height(H) Depth(D)
(Thickness- enclosure: 1.0~1.2mm, BMP: 1.0~1.6mm) (Unit: mm)
* Specifications and dimensions may be changed without a prior notice for the improvement of performance.
Drawings and Dimensions
200
250
300
300
350
350
400
400
400
450
450
450
500
500
600
600
500
600
600
600
700
700
700
700
800
800
300
350
200
400
250
450
300
500
600
350
550
400
600
400
500
700
700
800
900
500
600
900
1000
1200
600
1200
100/150
150/170
150
150/200
150/170
150/200
150/200
150/200
150/220
150/200
150/220
150/200
150/230
150/220
150/230
150/250
170/250
170/250
170/250
150/250
170/250
170/250
170/300
170/300
170/250
170/300
140
190
240
240
290
290
340
340
340
390
390
440
430
540
530
430
530
530
530
630
630
630
620
620
730
720
240
290
140
340
190
390
240
440
540
290
490
340
530
340
430
630
630
730
830
430
530
830
920
1120
530
1120
116
166
216
216
266
266
316
316
316
366
366
416
406
516
506
406
506
506
506
616
606
606
596
596
706
696
216
266
116
316
166
366
216
416
516
266
466
316
506
316
406
606
606
706
806
416
506
806
448
548
506
548
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
448
548
-
548
MW MH HW HH1 HH2
2030 10/15
2535 15/17
3020 15
3040 15/20
3525 15/17
3545 15/20
4030 15/20
4050 15/20
4060 15/22
4535 15/20
4555 15/22
5040 15/20
5060 15/23
6040 15/22
6050 15/23
5070 15/25
6070 17/25
6080 17/25
6090 17/25
7050 15/25
7060 17/25
7090 17/25
7010 17/30
7012 17/30
8060 17/25
8012 17/30
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
ES/EU
: Available on request
26 27
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Available as UL certified products
(UL50 Type 1 Enclosure; additional discussion needed)
Feature
Material
Color
Components
Surface mounting, Various sizes, Robust (1.6mmT)
CD: Steel, CD-U: Stainless steel
Basic: 5Y7/1 (Smooth powder coating)
Custom: RAL7032 (Leathertone powder coating)
Other colors upon request
B.M.P, Handle
(CD Steel, CD-U Stainless Steel)
CD/CD-U SeriesIndoor Surface Mounting Distribution Box
Drawings and Dimensions
CD
CS
* We can custom-build enclosures in any size other than the standard sizes.
(B.M.P. Thickness: 1.6mm, Unit: mm)
(Thickness-enclosure: 1.6mm ~ 2.3mm, B.M.P. Thickness: 1.6mm ~ 2.3mm, Unit: mm)
800 1200 180 1.6 720 1120 670 535 -
ModelEnclosure Dimensions B.M.P. Dimensions
Width(W) Height(H) Depth(D) Thickness MW MH HW HH2HH1
MW MH HW HH
320 420 270 370400 500 150 1.6
B.M.P, Handle
5Y7/1 (Smooth powder coating)
Custom color upon request
Roof, Document box, G Handle
CS: Steel 1.6~2.3mm
CU: Stainless steel
Waterproof (limited use)
CS/CU SeriesIndoor & Outdoor Enclosures
(CS Steel, CU Stainless Steel)
Feature
Material
Color
Components
Options
300
Drawings and Dimensions
We can custom-build enclosures in any size other than the standard sizes.
ModelEnclosure Dimensions B.M.P. Dimensions
Width(W) Height(H) Depth(D)
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
250
900
350
2000
150 170
820
270
1900
120
770
220
1870
28 29
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Waterproof, Inner doorIndoor & outdoor Use
(OS Steel, OU Stainless Steel)
OS/OU SeriesOutdoor Enclosure with Inner Door
Feature
Material
Color
Components
OS: Steel 1.6~2.3mmOU: Stainless steel
B.M.P, Handle
5Y7/1 (Smooth powder coating)Custom color upon request
Model
Drawings and Dimensions
BMP
InnerDoor
Monitoring Window
Enclosure Dimensions B.M.P Dimensions
Width(W) Height(H) Depth(D) Inner Depth
Inner Depth means the distance between Inner Door and B.M.P.We can custom-build enclosures in any size other than the standard sizes.
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
MW MH
MW MH
HW HH
300
700
400
1000
250
300
195
595
300
900
165
565
265
865
150
200OS
FB / FS
(FB, FS Steel, FU Stainless Steel)
Flush Mounted Distribution Box FB SeriesFlush Mounted Distribution Box Door FS/FU Series
Available as UL certified products
(UL50 Type 1 Enclosure; additional discussion needed)
Basic: 5Y7/1 (Smooth powder coating)Other colors upon request
FB: B.M.P.
Feature
FB, FS: Steel, FU: Stainless steel
High strengh and durability
Material
Color
Components
We can custom-build enclosures in any size other than the standard sizes.“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment.
Therefore, they do not guarantee water & dust proof capacity in real world environments.”
Model
Drawings and Dimensions
Enclosure Dimensions (FB) Door Dimensions (FS, FU)B.M.P Dimensions
Width(W) Height(H) Depth(D) Thickness Width(W) Height(H) Frame
200
800
300
1400
100
170
120
720 1320
220 200
800
300
1400
260
870
1.6
30 31
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
(HS Steel, HU Stainless Steel)
Enhanced Water & Dust-proof PerformanceHS/HU Series
Available as UL certified products
(UL50 Type 4, 4X, 12 Enclosure; additional discussion needed)
RAL7032 (Leathertone powder coating)
Other colors upon request
B.M.P., Earthing bolt, Wall mount brackets,
Door clamp, Lock ring for security
Feature
HS: Steel, HU: Stainless steel
Enhanced weather proof,
protection from the outside
Material
Color
Components
Document box, Lifting bolts,
Cable hole cover
Options
Model
Drawings and Dimensions
Enclosure Dimensions Door Dimensions B.M.P Dimensions No. ofClampsWidth(W) Height(H) Depth(D)
We can custom-build enclosures in any size other than the standard sizes.“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment.
Therefore, they do not guarantee water & dust proof capacity in real world environments.”
(Thickness-enclosure: 2.0mm ~ 2.3mm, B.M.P. Thickness: 2.0mm ~ 2.3mm, Unit: mm)
Size Open HW HH
300
1000
400
1800
150
1000
4
9
200*300
900*1700
192
892
320
1720
※ Higher degree of IP covers lower degrees of IP.
IP66 & NEMA 4X (UL) Certified Product Guide
Steel, Stainless steelMaterial
Tempered glass 5mm,
Polycarbonate 5mm (TUV)
RAL7032 (Leathertone powder coating)
Monitoring
Window
Color
NEMA 4X (UL), IP66 (TUV)Certification
We have IP66 and NEMA 4X certifications for our enclosures with monitoring windows, and a pioneer in obtaining global certifications as an electrical enclosure manufacturer.
※ Note
1. The max. size of the depth excludes the depth of the door.
2. You can order any sizes between minimum and maximum sizes but the certified detailed specifications
(e.g. handle, hinge, structure) must be applied.
3. The enclosures are certified under the assumption that there are no holes or extra components other than the
ones certified, and we do not hold any responsibilities for the additional holes and components.
※ You can refer to page 30 for the detailed specifications of HS/HU series.
Material: Steel / STS304 / STS316L (Min. thickness: 2mm)
Door types: Single, LR (left & right), FB (front & back) and any combinations
Model Min. Size Max. Size Certification Certification Body
PS-UL
PS-IP
HS/HU
W400*H450*D150 W2300*H2350*D1000
W2300*H2350*D1000
W1000*H1800*D1000
W400*H450*D150
W200*H200*D100
NEMA 4X (1, 3, 4, 3R, 12 included)
IP66
NEMA 4X(4, 12 included)
UL
TUV SUD
UL
ModelMax. Size
(Monitoring Window) Certification Certification Body
PS-UL
PS-IP
UL
TUV
NEMA 4X (1, 3, 4, 3R, 12 included)825 * 2125
825 * 2125 IP66 (lower IP degrees included)
(Unit: mm)Dimensions
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
246*346
946*1746
HS / HU
※ H
Mo
Win
Col
Cer
32 33
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Feature
Material
Color
Components
Options
Available as IP66(TUV) and UL certified products
(UL50 Type 4X Enclosure; additional discussion needed)
Steel / Stainless steel
RAL7032 (Leathertone powder coating)
Custom color upon request
B.M.P., cable hole cover, lifting bolts, base, handle
Filter & case, door stopper, rear door, side BMP,
keyboard support, horizontal bracket, earthing bolt,
busbar, fan cover, cooler, cable bar, channel base,
document box, monitoring window, air conditioner,
lamp bracket, limit switch bracket
Enhanced water & dust proof performance
(PS Steel / PSU Stainless)
Water & Dust-proof EnclosurePS Series
Drawings
We can custom-build enclosures in any size other than the standard sizes.
“Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment. Therefore, they do not guarantee water & dust proof capacity in real world environments.”
Feature
Material
Color
Components
Options
Modular structure, Easy maintenance
Roll forming profile with high strength
Profile: Steel
Door, Cover: Steel / Stainless steel
RAL7035 (Leathertone powder coating)
Custom color upon request
B.M.P., cable hole cover, lifting bolt, base,
rear cover, standard handle, lamp bracket,
limit bracket, document box, horizontal bracket
Filter & case, door stopper, rear door, side BMP,
keyboard support, earthing bolt, busbar, fan cover,
cooler, cable bar, channel base, document box,
monitoring window, air conditioner, joint bracket
Available as IP55(TUV) and CE certified products
(additional discussion needed)
(RT Steel / RTU Stainless)RT Series
Modular Structure Enclosure
Drawings
REAR VIEW
W
MW
D
HMH
We can custom-build enclosures in any size other than the standard sizes.Water & dust proof ratings (IP code and NEMA type) are the result of a test conducted in a laboratory environment.
Therefore, they do not guarantee water & dust proof capacity in real world environments.”
Com
Opt
Avai
Color
Compo
Option
34 35
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
(SD Steel / SDU Stainless)SD Series
Rack Enclosure with Inner Swing Door
Feature
Material
Color
Components
Options
Steel / Stainless steel
RAL7032 (Leathertone powder coating)Custom color upon request
B.M.P., cable hole cover, lifting bolts, base, horizontal bracket, swing frame unit, clip nut, standard handle
Filter & case, door stopper, rear door, side BMP,keyboard support, horizontal bracket, earthing bolt, busbar, fan cover, cooler, cable bar,channel base, document box, monitoring window,air conditioner, lamp bracket, limit switch bracket,blank cover
Modular structure, Easy maintenance
Drawings
We can custom-build enclosures in any size other than the standard sizes.
(MS Steel / MSU Stainless)MS Series
Versatile Modular Structure Enclosure
Feature
Material
Color
Components
Options
Steel / Stainless steel
RAL7032 (Leathertone powder coating)
Custom color upon request
B.M.P., cable hole cover, lifting bolts, base,
horizontal bracket, swing frame unit, clip nut,
standard handle
Filter & case, door stopper, rear door,
side BMP, keyboard support, horizontal bracket,
earthing bolt, busbar, fan cover, cooler,
cable bar, channel base, document box,
monitoring window, air conditioner,
lamp bracket, limit switch bracket
Modular structure, Easy maintenance
Available as UL certified products
(UL50 Type 3R Enclosure; additional discussion needed)
Drawings
We can custom-build enclosures in any size other than the standard sizes.
36 37
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
SIDE (L) VIEW LEAR VIEWFRONT VIEW
W
WD W
H
H
W
ANCHOR BASE
CASTER BASE
Drawings
D
D
CABLE GLAND녹아웃 타공
DOOR
(KP Steel / KPU Stainless)
Operation EnclosureKP Series
Feature
Material
Color
Components
Options
Steel / Stainless steel
NL4083, EN4673, EC4283
(Powder coating)
Custom color upon request
Shelf, B.M.P.
B.M.P., side B.M.P., shelf, caster,
touch pen bracket, mouse pad,
cable glands (PG-13.5, PG-16, PG-25)
17’’ monitor, Modular structure, Multi-functional
We can custom-build enclosures in any size other than the standard sizes.
Feature
Material
Color
Components
Steel / Stainless steel
NL4083, EN4673, EC4283
(Powder coating)
Custom color upon request
B.M.P.
Console style, Multi-functional
(DS Steel / DSU Stainless)
Desk-style EnclosureDS Series
Drawings
We can custom-build enclosures in any size other than the standard sizes.
MODELEnclosure Dimensions
Width(W) Height(H) Depth(D)
1520 10
1725 10
2030 12
150
170
200
200
250
300
100
100
120
TSU Dimensions
Type
Material
Components
Stainless steel
Feature Easy to use for a small terminal box
Waterproof with polyurethane gasket
B.M.P., hook clamp
TSU-S: Regular hook clamp
TSU-L: Lock hook clamp
(Stainless)
TSU SeriesHook-style Terminal Box
We can custom-build enclosures in any size other than the standard sizes.
38 39
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Communications Box (IDF junction box, UTP junction box, TV junction box, low current junction box)
(Steel / Stainless)
Communication Terminal Box Series
Steel, Stainless steel
(Steel / Stainless)
OSM/OSU SeriesOutdoor Metering Box
Material
5Y7/1 (Smooth powder coating)Custom color upon request
Color
B.M.P.Component
We can custom-build enclosures in any size other
than the standard sizes.
(Steel / Stainless)
Flush Mounted Metering Box FM Series
Flush Mounted Cover FSM/FUM Series
We can custom-build enclosures in any size other thanthe standard sizes.
Steel, Stainless steelMaterial
5Y7/1 (Smooth powder coating)Custom color upon request
Color
B.M.P.Component
Cost-effective & Indoor only
Steel (HGI 1.6T ~ 3.2T)Stainless steel
Basic: NoneCustom color upon request
Min. : W100 * H100 * D100 Max. : W2600 * H3200 * D2600
Available as UL50 Type 1 EnclosureCustom size, color, structure upon request(Additional discussion needed)
Feature
Material
Color
Size
UL Certified Product
(Steel / Stainless)
Pull Box PB-UL Series
We can custom-build enclosures in any size other than the standard sizes.
(Steel / Stainless)
Fire Hydrant System Series
We can custom-build enclosures in any size other than the standard sizes.
Color: 5Y7/1, Material: Steel 2.3mm
Base Support
Base & Support
Size: Height 100/200/300
40 41
HSBOX Enclosure https://www.hsboxglobal.com
HSB
OX E
ncl
osu
re
HSB
OX E
ncl
osu
re
Used to prevent dust from enteringthe enclosure through cable glandswhen wires are not used
Feature
Model Size Available PG model Units / pack
Ø 6
Ø 8
Ø 10
Ø 12
Ø 14
Ø 18
Ø 25
Ø 32
Ø 38
Ø 44
PG-07
PG-09
PG-11
PG-13.5
PG-16, PG-19
PG-21, PG-25
PG-29
PG-36
PG-42
PG-48, PG-63
100
100
100
100
100
100
50
20
20
20
PG-CAP
Cable Gland Cap PG-CAP
Material
IP Degree
Certification
Heat resistance
Color
Nylon PA
IP68
IP68, RoHs
Instantaneous 120 degrees
Gray (G) - RAL7035
Black (B) - RAL9005
Outer
Unit: mmDimensions
※ Notation:
H N
N
C
C
Sealing nut Seal Body&washer Lock nut
PG-07
PG-09
PG-11
PG-13.5
PG-16
PG-19
PG-21
PG-25
PG-29
PG-36
PG-42
PG-48
PG-63
3~6.5
4~8
5~10
6~12
10~14
13~15
14~18
17~21
19~25
23~32
33~38
38~44
43~50
8
8
8
9
10
10
10
11
12
14
14
14
27
22
26
27
28
30
30
35
34
40
48
49
50
60
16
19
22
24
27
27/28
33
35/36
41/42
52/53
60/61
64/65
72
12
16
18
20
22
24
28
30
37
47
54
59
70
13
17
19
21
23
25
29
31
37
49
55
61
71
100
100
100
100
100
100
100
50
50
20
20
20
4
TypeWire
range
H Outer Cutting
Size
Units per pack
15
15
15
15
15
-
15
-
18
18
18
19
-
PG
Model
100
100
100
100
100
-
100
-
50
20
20
20
-
12.5
15.2
18.6
20.4
22.5
-
28.3
-
37
47
54
59.3
-
15
19
22
24
27
-
33
-
42
53
60
65
-
22
24
26
27
29
-
35
-
40
48
50
51
-
This color indicates standard products PG-xxG and PG-xxB.
This color indicates products with long threads (N) PG-xxGL and PG-xxBL.
Ø
Ø
G B GL BL G B GL BL G B GL BL G B GL BL G B GL BL
Cable Gland PG Series
Terminal block body is made from flame-resistant PC eliminating the need for
separate insulating Bakelite mounting plate (complete insulation).
One size regardless of the thickness of cables (up to 120SQ)
Contact failure is minimized with the use of solderless terminals.
Features
Ground Terminal
Type AAluminum mould
Type BSUS plate
Type A Ø100, Height 1000 SUS, AL Mould
Type B Ø100, Height 1000 SUS 304 Welding
Post